Job Responsibilities:

· Design and implementation of mixed signal CMOS IP. Development cycle including circuit design, simulation, modeling, verification and bench characterization.

· Management products utilizing leading edge sub-micron CMOS technologies, e.g., 5/6nm

· Developing state of the art high speed mixed signal IP products that include op amps, comparators, bandgap, low-drop linear regulator, ADCs, DC-DC converters, and high bit-rate (Gbps) Serdes TX/RX.

Requirements:

· Bachelor or above degree in Microelectronic or Electronic and Information Engineering

· 5 years or above experience in the area of analog design

· Good knowledge in analog IC design in high speed Serdes, e.g., PLL, CDR, CTLE/DFE, TX driver etc.

• Solid understanding and experience in key analog layout considerations such as device matching, parasitic, noise coupling, floor planning, sensitive signal routing, current density and reliability considerations
• Familiar with SPICE simulation tool (e.g., Cadence spectre, Synopsys Custom Compiler, Calibre)

· Strong Communication skills, high level of independence, self-motivation and good team player

Airconditioning Engineers

1) Ability to lead and manage teams

2) Operation Supports to teams and clients

3) Self Motivated Individuals

4) Good Team Player

5) Experienece In Troubleshooting and Repair / Service of Split Type and VRF/ VRV systems

6) Valid Class 3 License

7) Minimum 5 years experience in Airconditioning Field

8) Possess field experience is a MUST

9) Strong troubleshooting and analytical skills

10) Prior experience working in MNCs Agent will be an advantage (I.E. Daikin, Mitsubishi, Toshiba)

Job Description:

The Refrigeration Engineer/Technician will be responsible for the installation, maintenance, and repair of refrigeration systems used in the production and storage of ice, including ice machines, cold rooms, freezer trucks, and autopacking machines. This role involves troubleshooting, preventive maintenance, and ensuring all equipment operates efficiently and complies with safety standards. The technician will collaborate with the production team to minimize downtime and improve the overall efficiency of the facility.

Responsibilities:

1. Installation and Maintenance:Install and commission ice machines, cold rooms, freezer trucks, and autopacking machines.
   Perform routine preventive maintenance to ensure optimal functioning of refrigeration and packaging systems.
   Troubleshoot and repair breakdowns or malfunctions in refrigeration systems, including ice machines, compressors, condensers, evaporators, and automated packing equipment.
   
2. Refrigeration Systems Operation:Monitor the performance of ice-making and cold storage equipment.
   Adjust and calibrate refrigeration controls, such as thermostats and pressure gauges, to maintain optimal temperatures.
   Manage refrigerant levels, ensuring the proper handling and disposal of refrigerants as per environmental regulations.
   
3. Cold Room and Freezer Truck Management:Ensure cold rooms and freezer trucks maintain appropriate temperatures for ice storage and transportation.
   Conduct regular inspections of cold storage facilities and freezer trucks to identify potential issues.
   Manage the energy efficiency of refrigeration units, recommending upgrades or improvements when necessary.
   
4. Autopacking Machine Support:Maintain and repair autopacking machines, ensuring they operate smoothly and efficiently.
   Perform mechanical and electrical troubleshooting on packing machines and automate systems as needed.
   
5. Documentation and Reporting:Keep detailed maintenance logs and records of equipment performance.
   Report any major equipment failures or parts that need replacement to management.
   Assist in managing spare parts inventory for refrigeration and packing equipment.
   
6. Health & Safety Compliance:Ensure all work complies with safety standards, especially when working with refrigerants and electrical systems.
   Maintain a safe working environment, adhering to industry regulations for refrigerants and cold storage.
   

Requirements:

1. Technical Qualifications:Diploma or Degree in Refrigeration, HVAC (Heating, Ventilation, Air Conditioning), or a related engineering field.
   Certification in handling refrigerants (e.g., F-Gas certification or equivalent).
   Electrical and mechanical certifications are preferred.
   
2. Experience:Minimum of 3-5 years of experience working with commercial refrigeration systems, including ice machines, cold rooms, freezer trucks, and autopacking machines.
   Experience with ammonia-based refrigeration systems (if applicable) and other industrial-grade cooling systems is an advantage.
   Familiarity with automated packaging machines and production line equipment.
   
3. Technical Skills:Strong troubleshooting and diagnostic skills for both refrigeration and mechanical systems.
   Ability to read and interpret technical diagrams and manuals.
   Proficiency in using tools, meters, and other diagnostic equipment for refrigeration maintenance.
   
4. Communication and Teamwork:Good communication skills to coordinate with the production team, suppliers, and management.
   Ability to work independently and as part of a team.
   
5. Other Requirements:Willingness to work flexible hours, including on-call duties for emergency repairs.
   Valid driver’s license for maintenance work on freezer trucks.
   

Job Scope:
As a member of customer support team, the Customer Support Engineer (CSE) will be responsible for technical support activities to customers and partners including on-site support and second line support as needed. He/she will act as the liaison between the field and customer support regional office in Hong Kong and being the technical representative to resolve customers and partners’ issues and escalations.

Responsibilities

• Provide remote support to customers to resolve technical problem
• On-site support to customers until problem solved
• Perform on-site installation and training to customers
• Handle and follow up escalated issues from customers until solution is provided. Communicate promptly escalations to the Regional Technical Specialist team in Hong Kong
• Provide application support to clients’ engineer or internal staffs
• Prepare timely report to customer support management
• Participate on special projects and company initiatives as needed.

Requirements

• Candidate must possess at least Professional Certificate/NiTEC, Diploma/Advanced/Higher/Graduate Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• At least 2 Year(s) of working experience in the related field is required for this position.
• Required Skill(s): Microsoft Office
• Preferably Junior Executive specialized in Engineering - Mechanical/Automotive or equivalent.
• Preferably with Class 3 License

Job Description & Requirements

• Review of M&E system design with a view of future maintenance needs
• Managing and participating in testing and commissioning of building M&E system
• Management of facilities handover (including associated trainings, communications and related defects issues) to maintenance contractors and end users
• Managing and monitoring of project schedule, preparing and submission of claims, managing claims schedule, processes and procedures
• Leading outsource facilities management team in day-to-day M&E activities (including vendor management, reviewing and recommending preventive / corrective maintenance, planning and scheduling of preventive maintenance works and future upgrading works which may be required)
• Developing, implementing, reviewing and maintaining maintenance / emergency process, standard operating procedure, etc.
• Monitoring cost and expenditure of repair and maintenance works
• Any other duties as assigned

Maintenance

• Provide technical services to maintain and troubleshoot different computer and electrical systems.
• Attend and carry out Fault Finding and Diagnosis of systems breakdowns, both on a mechanical and electrical basis, with a focus on providing high levels of service and response times.
• Follow Preventive Maintenance work schedules to specified standards and procedures and maintain all relevant written records
• Follow up and close all incidents, issues and request timely
• Support Project Team on some site installations and testing and commissioning matters.
• Be available for on call and stand by duty procedures and other responsibilities required.
• To follow all company business operation and SOP at all times
• Participate actively in Health Safety and Environment programs and activities in order to achieve Company’s KPIs, ISO 14001 objectives and target. Proactively rectify any abnormalities, unsafe acts or unsafe situations and report to supervisor accordingly.
• Maintain high standard of housekeeping at all times
• Other ad-hoc duties as assigned by immediate supervisor.

Requirements

• Higher Nitec in Electrical Engineering / Mechanical Engineering
• At least 1-2 years of relevant working experience
• Possess at least Class 3 license manual to operate vehicle for onsite support
• Knowledge on computer server maintenance, network troubleshooting, basic software troubleshooting.
• Knowledge on Firewall, Backup solution and Anti-virus solution
• Good communication and interpersonal skills
• Able to perform standby duties after office hours and provide onsite support, if required.

Technical Responsibilities

• Undertake design document reviews and possess in depth knowledge of project specification, relevant international codes, industry standards and relevant Classification Rules and Regualtion
• Prepare in-service design concept and perform detailed design as required by project. Prepare and deliver structural design sketches and structural calculations report at project datelines and quality.
• Ensure effective communication and coordination with multi-disciplines team to obtain input for Discipline designs and to develop a crash free design.
• Prepare design concept for structural framing, grillage and fastening during in-transport and onsite condition and perform structural engineering for in-transportation and installation conditions for the unit
• Prepare procedures for loadout, transportation and installation operations
• Utilises STAAD PRO and SAP2000 software as well as company proprietary Microsoft Excel spreadsheets as required. Conversant with relevant International Codes of Practice as well as engineering and industry standards
• Adheres to and complies with engineering procedures and industrial standards/codes and provides constructive feedback for continuous improvement. Identifies potential applications for new processes and technologies to improve productivity and efficiency
• Ensures effective communication and interface between all disciplines for design and development
• Ensure project meets client requirements, industry standards and relevant Classification Rules and regulations
• Participates in internal audits and investigations as required
• Establishes and maintains effective working relationships internally. Engages with inter-discipline community and promotes networking and knowledge sharing
• Review all detailed drawings ensuring technical correctness, professional presentation and that fabrication and installation requirements are employed.
• Review vendor deliverables, checking for compliances with project specifications and providing comments as necessary.
• Provide technical support to fabrication queries

Job Requirements

• Bachelor’s or Master’s degree in Civil & Structural Engineering or equivalent engineering specialisation from an accredited university
• 5+ years professional engineering in the related field
• STAAD.PRO, SAP2000 familiarity. Knowledge in SACS is an advantage
• Familarity of industry standards, codes and/or Classification Society Rules
• Excellent technical communication (oral and written) skills with proven ability to present technical issues to design teams and project engineering teams
• Self-starter and be able to work with minimal supervision, make sound decisions, take independent action, analyze problems, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels
• High level of numerical accuracy and attention to detail
• Preferably to have some experience in Transportation and installation or naval architectural related design or Marine Warranty Survey (MWS)

• Conducting regular site inspections to ensure adherence to health and safety regulations
• Managing the daily operation of construction projects
• Interpreting and implementing construction plans as per the project blueprint
• Liaising with subcontractors, architects, and other professional staff to ensure project requirements are met
• Assessing potential risks and implementing preventive measures to mitigate them
• Ensuring materials and resources are used effectively and wastage is minimized
• Keeping accurate records of construction progress, changes, and other relevant information
• Resolving technical issues with the project team and offering advice on improvements and solutions
• Coordinate with clients, stakeholders, and local authorities to ensure smooth project execution
• Supervising and instructing the construction team as well as onsite laborers

• Provide technical services to the maintenance and troubleshooting of the different security, mechanical and electrical systems as company’s product
• It would be preferable to have a woman for the role
• Attend and carry out Fault Finding and Diagnosis of systems breakdowns, both on a mechanical and electrical basis, with a focus on providing high levels of service and response times
• Follow Preventive and Corrective Maintenance work schedules to specified standards and procedures and maintain all relevant written records as applicable
• Attend to any operational and maintenance issues
• Maintain records of breakdowns and repairs in compliance with ISO standards
• Assist in project related activities that include deployment, installation and testing
• Assist in planning standby duties and implementing better strategies for improvement of maintenance operation
• Be available for on call and stand by duty procedures and other responsibilities required
• To follow all company business operation and SOP at all times
• Participate actively in Health Safety and Environment programs and activities in order to achieve Company’s KPIs, ISO 14001 objectives and target. Proactively rectify any abnormalities, unsafe acts or unsafe situations and report to supervisor accordingly.
• Maintain high standard of housekeeping at all times
• Other operational and maintenance duties as assigned by Supervisor

Requirements

• Minimum of 2 years of experience with a Diploma / ITE in Electrical or Mechanical Engineering
• Required to work half a day on Saturday
• This position will be based at the Girls' Home
• Work independently and as part of a team
• Good at coordination and strong communication skills.

• Provide technical services to the maintenance and troubleshooting of the different security, mechanical and electrical systems as company’s product
• Attend and carry out Fault Finding and Diagnosis of systems breakdowns, both on a mechanical and electrical basis, with a focus on providing high levels of service and response times
• Follow Preventive and Corrective Maintenance work schedules to specified standards and procedures and maintain all relevant written records as applicable
• Attend to any operational and maintenance issues
• Maintain records of breakdowns and repairs in compliance with ISO standards
• Assist in project related activities that include deployment, installation and testing
• Assist in planning standby duties and implementing better strategies for improvement of maintenance operation
• Be available for on call and stand by duty procedures and other responsibilities required
• To follow all company business operation and SOP at all times
• Participate actively in Health Safety and Environment programs and activities in order to achieve Company’s KPIs, ISO 14001 objectives and target. Proactively rectify any abnormalities, unsafe acts or unsafe situations and report to supervisor accordingly.
• Maintain high standard of housekeeping at all times
• It would be preferable to have a woman for the role
• Other operational and maintenance duties as assigned by Supervisor

Requirements

• Minimum of 1 years of experience with a Diploma / ITE in Electrical or Mechanical Engineering
• Required to work half a day on Saturday
• This position will be based at the Girls' Home
• Work independently and as part of a team
• Good at coordination and strong communication skills.
• Fresh graduates are welcome to apply

[2 year contract - 01 Jan 2025 to 31 Dec 2026]

Roles and Responsibilities :

· Analyse the Ministry of Manpower (MOM) needs, scope the problem and develop business case to address the problem

· Document requirements, source and evaluate alternatives, and recommend solution that best fits the Ministry of Manpower’s needs

· Work with MOM vendor and app vendor on the solutions and design to seek clarification and acceptance.

· Design, develop and deliver working software applications to delight customers

· Improve software quality using XP practices such as code review and unit testing

· Prepare architectural and other technical documents

· Assist BA on user stories elaboration

· Assist QA on test automation and bug fixes

· Assist DevOps on build and release automation

· Work with Ministry of Manpower users to ensure smooth deployment and adoption of new solution

· Assess business needs for service requests and the impact of enhancements to the system

· Assess problem resolution approach and implement effective service recovery of ICT incidents and establish systems and processes to prevent recurrence of the same incident

· Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Knowledge and Skills:

· Degree in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines.

· Minimum 7 years of experience as a Full Stack Developer.

· Experience with version control systems such as Git

· Experience in front end technologies such as Angular

· Experience in backend technologies such as Java, Python, Node.js

· Experience in low code application platforms such as Pega

· Experience in one or more of the following processes and infrastructure knowledge:

o Agile processes/practices

o Continuous integration/continuous deployment

o Cloud/PaaS platforms, such as AWS/GCP

o Serverless Framework

o Docker/container technology

· Experience with low code development and wireframing tools such as Figma

· Familiar with Unit Testing

· Having the following traits will be an added advantage:

o Self-driven and independent

o Strong problem-solving and analytical skills

o Good communication and interpersonal skills

o Good presentation and listening skills

· Hands-on experience in at least 1 full project development life cycles in Pega

· Relevant professional certification in Pega will have higher weightage.

· Working experience in Agile and UX development environment will be an added advantage

· Advantageous to have:

o Consulting or Business Analysis experience

o Prior knowledge in the system solutioning, development for mid and large-scale IT development projects

o Knowledge of Webservice, REST API, sFTP and security concepts in security interfaces between systems

· Extensive experience in requirement/workshop facilitations and documentation of user requirement into Agile user stories, acceptance criteria.

· Extensive experience in defining UAT test scenarios and facilitate SIT and UAT tests, ability to define system interface specifications.

[2 year contract - 01 Jan 2025 to 31 Dec 2026]

Roles and Responsibilities :

· Analyse the Ministry of Manpower (MOM) needs, scope the problem and develop business case to address the problem

· Document requirements, source and evaluate alternatives, and recommend solution that best fits the Ministry of Manpower’s needs

· Work with MOM vendor and app vendor on the solutions and design to seek clarification and acceptance.

· Design, develop and deliver working software applications to delight customers

· Improve software quality using XP practices such as code review and unit testing

· Prepare architectural and other technical documents

· Assist BA on user stories elaboration

· Assist QA on test automation and bug fixes

· Assist DevOps on build and release automation

· Work with Ministry of Manpower users to ensure smooth deployment and adoption of new solution

· Assess business needs for service requests and the impact of enhancements to the system

· Assess problem resolution approach and implement effective service recovery of ICT incidents and establish systems and processes to prevent recurrence of the same incident

· Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Knowledge and Skills:

· Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines.

· Minimum 4 years of experience as a Full Stack Developer.

· Experience with version control systems such as Git

· Experience in front end technologies such as Angular

· Experience in backend technologies such as Java, Python, Node.js

· Experience in low code application platforms such as Pega

· Experience in one or more of the following processes and infrastructure knowledge:

o Agile processes/practices

o Continuous integration/continuous deployment

o Cloud/PaaS platforms, such as AWS/GCP

o Serverless Framework

o Docker/container technology

· Experience with low code development and wireframing tools such as Figma

· Familiar with Unit Testing

· Having the following traits will be an added advantage:

o Self-driven and independent

o Strong problem-solving and analytical skills

o Good communication and interpersonal skills

o Good presentation and listening skills

· Hands-on experience in at least 1 full project development life cycles in Pega

· Relevant professional certification in Pega will have higher weightage.

· Working experience in Agile and UX development environment will be an added advantage

· Advantageous to have:

o Consulting or Business Analysis experience

o Prior knowledge in the system solutioning, development for mid and large-scale IT development projects

o Knowledge of Webservice, REST API, sFTP and security concepts in security interfaces between systems

· Extensive experience in requirement/workshop facilitations and documentation of user requirement into Agile user stories, acceptance criteria.

· Extensive experience in defining UAT test scenarios and facilitate SIT and UAT tests, ability to define system interface specifications.

[2 year contract - 01 Apr 2025 to 31 Mar 2027]

Roles and Responsibilities :

· Assist Product Owner, Business Analyst to craft out user story acceptance criteria

· Analyse and decompose complicated software systems, and design a holistic test strategy

· Conduct research on emerging technologies and develop test automation framework

· Develop test suites of test scenarios and test cases

· Take a risk-based approach for test automation

· Perform time boxed exploratory testing

· Maintain regression test suite in QA nightly build

· Actively refine smoke test suite in Development CI environment

· Lead system integration testing with other systems

· Manage user acceptance testing

· Manage defect life cycle, test artefacts and repository

· Drive continuous improvement in agile testing practices and tools

· Take on secondary role as low code application development engineer or Security Ops Engineer

· Improve software quality using XP practices such as code review and unit testing

· Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Knowledge and Skills:

· Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines.

· Min 4 years’experience in exploratory testing and regression test automation

· Strong analytical skills

· Meticulous attention to details

· Good interpersonal skills such as tactfulness

· Good presentation and listening skills

· Experience in agile development environment will be an added advantage

· Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter) or EggPlant or Pega Unit Test will be an added advantage

· Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

1. JOB DESCRIPTION

Job Title

Assistant Production Engineer

Job Description & Requirements

Overview

As an Production Engineer (Senior / Assistant), you will assist the Production Manager in managing the Overall Operation of Precast Cconstruction Plant. You are to adhere to Quality, Environmental, Safety Management System in accordance with Company’s standards and customers’ requirements.

Responsibilities

1) Identifies operational problems by observing and studying system functioning and performance results; investigating complaints and suggestions; interviewing process supervisors and operators; completing troubleshooting procedures.

2) Identifies operational priorities by assessing operational objectives; determining project objectives, such as, efficiency, cost savings, energy conservation, operator convenience, safety, environmental quality; estimating relevance, time, and costs.

3) Develops operational solutions by defining, studying, estimating, and screening alternative solutions; calculating economics; determining impact on total system.

4) Anticipates operational problems by studying operating targets, modes of operation, limitations & performance.

5) Improves operational quality results by studying, evaluating, and recommending process re-design; implementing changes; contributing information and opinion to improve productivity performance.

6) Provides operational management information by collecting, analyzing, and summarizing operating and engineering data and trends.

7) Maintains safe and healthy work environment by following and enforcing standards and procedures; complying with legal regulations.

8) Participate in reviewing Company Quality, Environmental, Safety and Health Risk Assessment to ensure its effectiveness.

9) Participate in investigation of EHS incident and recommend preventive measure.

10) Authorize to stop production relating to Safety, Environmental or Efficiency issue not complying to Company Quality, Environmental, Safety and Health Management System or Procedure.

11) Verify that solutions agreed for problems relating to non-conformities relating to product process and Company Quality, Environmental, Safety and Healthsystem are implemented.

12) Review and recommend the disposition of the rejected in-coming raw material, work-in-process and finished goods.

13) Review and endorse Company Quality, Environmental, Safety and Health System Procedure.

14) Manage, coach and train the team members which include carrying out performance review and disciplinary action, if required.

15) Perform any other duties as assigned by the Management and the designated manager.

Requirements

1) Minimum ITE

a) Preferably in Fabrication / Civil Engineering

b) 5 years’ experience working as Engineer or 8 years’ as Technician in a manufacturing environment

2) Diploma in Engineering

a) Preferably in Fabrication / Civil Engineering

b) 2 years’ experience working as Engineer in a manufacturing environment

3) Preferably with knowledge of manufacturing and assembling of Precasting.

4) Knowledge of ISO 9001, 14001 & 45001 standards and AutoCAD will be advantages.

5) Knowledge in Safety Management is a must.

6) IT savvy with proficient in Microsoft Office application.

7) Possess leadership and supervisory skills with manpower planning experiences.

8) Possess problem-solving, analyzing and reporting skills.

9) Possess good interpersonal skills and excellent team spirit.

10) Independent with high level of initiative and fast learner.

11) Meticulous and positive attitude in learning.

Overview

As an Production Engineer (Senior / Assistant), you will assist the Production Manager in managing the Overall Operation of Precast Construction Plant. You are to adhere to Quality, Environmental, Safety Management System in accordance with Company’s standards and customers’ requirements.

Responsibilities

1) Identifies operational problems by observing and studying system functioning and performance results; investigating complaints and suggestions; interviewing process supervisors and operators; completing troubleshooting procedures.

2) Identifies operational priorities by assessing operational objectives; determining project objectives, such as, efficiency, cost savings, energy conservation, operator convenience, safety, environmental quality; estimating relevance, time, and costs.

3) Develops operational solutions by defining, studying, estimating, and screening alternative solutions; calculating economics; determining impact on total system.

4) Anticipates operational problems by studying operating targets, modes of operation, limitations & performance.

5) Improves operational quality results by studying, evaluating, and recommending process re-design; implementing changes; contributing information and opinion to improve productivity performance.

6) Provides operational management information by collecting, analyzing, and summarizing operating and engineering data and trends.

7) Maintains safe and healthy work environment by following and enforcing standards and procedures; complying with legal regulations.

8) Participate in reviewing Company Quality, Environmental, Safety and Health Risk Assessment to ensure its effectiveness.

9) Participate in investigation of EHS incident and recommend preventive measure.

10) Authorize to stop production relating to Safety, Environmental or Efficiency issue not complying to Company Quality, Environmental, Safety and Health Management System or Procedure.

11) Verify that solutions agreed for problems relating to non-conformities relating to product process and Company Quality, Environmental, Safety and Healthsystem are implemented.

12) Review and recommend the disposition of the rejected in-coming raw material, work-in-process and finished goods.

13) Review and endorse Company Quality, Environmental, Safety and Health System Procedure.

14) Manage, coach and train the team members which include carrying out performance review and disciplinary action, if required.

15) Perform any other duties as assigned by the Management and the designated manager.

Requirements

1) Minimum ITE

a) Preferably in Fabrication / Civil Engineering

b) 5 years’ experience working as Engineer or 8 years’ as Technician in a manufacturing environment

2) Diploma in Engineering

a) Preferably in Fabrication / Civil Engineering

b) 2 years’ experience working as Engineer in a manufacturing environment

3) Preferably with knowledge of manufacturing and assembling of Precasting.

4) Knowledge of ISO 9001, 14001 & 45001 standards and AutoCAD will be advantages.

5) Knowledge in Safety Management is a must.

6) IT savvy with proficient in Microsoft Office application.

7) Possess leadership and supervisory skills with manpower planning experiences.

8) Possess problem-solving, analyzing and reporting skills.

9) Possess good interpersonal skills and excellent team spirit.

10) Independent with high level of initiative and fast learner.

11) Meticulous and positive attitude in learning.

Job Requirements
• Pre-plan and prepare construction schedule, coordinate activities
• Close monitoring of structural work progress, coordinate with precaster, steel bar suppliers and structural sub-contractors.
• Study project specifications such as civil/structural, architectural and M&E drawings
• Control project plan and achieve project optimism by reviewing designs, control quality and propose remedies if necessary.
• Prepare daily/weekly/month site report
• Maintain safe and clean working environment and ensure compliances according to standard rules and regulations
• Liaise with both internal and external parties for efficient optimum progress.
• Other ad-hoc duties as assigned by Project Director

We are representing our MNC client who produces Manufacturing Equipment.

NPI Process Engineer

Responsibilities

• Responsible for setting up and optimizing manufacturing processes, implementing quality control measures, and driving process improvements, including jig design and Design for Assembly (DFA) principles.
• Ensuring efficient and cost-effective manufacturing solutions, working closely with cross-functional teams throughout the product development lifecycle.
• Manufacturing Setup & Optimization: Develop and implement manufacturing processes and quality control measures.
• Use techniques such as Value Stream Mapping (VSM) to design optimized manufacturing concepts that maximize resource efficiency.
• Design for Assembly (DFA): Incorporate DFA principles into the manufacturing process to simplify assembly, reduce components, and streamline operations to lower overall product manufacturing costs.
• Work Instructions & Testing: Create work instructions, testing procedures, and inspection checklists for critical quality measurements. Define test parameters and collaborate with the tester design team to develop appropriate testing solutions.
• Process Improvements: Design jigs to enhance assembly efficiency and critical alignments. Explore alternative tools, such as smart tools and ergonomic fixtures, to improve manufacturing practices.
• Prototype & Pre-Series Build Support: Actively participate in prototype builds and pre-series activities. Provide feedback and collaborate with stakeholders to resolve issues and improve processes.
• Collaboration & Stakeholder Engagement: Work closely with project managers, supplier quality, quality management, production, and service teams. Review and approve Engineering Change Requests (ECRs) and ensure successful implementation.
• Lead knowledge transfer between manufacturing sites, ensuring successful setup of production capabilities, tester readiness, technical knowledge transfer, and production layout.
• Audit & Compliance: Act as the internal auditor for ISO45001, preparing for external audits and representing the NPI process engineering team during recertification audits.

Requirements

• Minimum Degree in Mechanical, Electronic, or Electrical Engineering, in manufacturing or automation environment.
• Strong technical background and expertise across various engineering and design disciplines.
• Proficiency in Design for Manufacturing and Assembly (DFMA), process engineering, data analysis techniques such as RCA and 5 Why, mechanical and electrical design knowledge, as well as software and CAD proficiency. Experience in 3D prototyping is also essential.
• Desirable skills include strong decision-making and time management abilities, basic project coordination experience, and risk assessment expertise.
• The candidate should be able to provide training and demonstrate leadership and management capabilities.
• Familiarity with supply chain management, programming, industrial engineering, automation, big data, and Industry 4.0 knowledge will be advantageous.

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

EA License No: 12C6254 | EA Personnel Registration No: R1879665

We are an early-stage cybersecurity startup focused on building innovative, real-time security solutions that protect enterprises against emerging threats. As part of our team, you’ll join a passionate group of engineers dedicated to creating high-performance, reliable products that meet the security needs of modern businesses.

Role Overview:

As a Senior Backend Engineer, you will be instrumental in designing and implementing the core backend architecture of our products. We’re looking for someone with deep expertise in Rust or Golang and a proven track record of developing and scaling highavailability systems. You’ll work closely with cross-functional teams to build MVPs, iterate on them, and scale solutions that are reliable and performant under high loads.

Key Responsibilities:

• Design, develop, and maintain robust backend systems using Rust or Golang.

• Build real-time, high-availability solutions that can handle large volumes of data with low latency.

• Lead the architecture and development of MVPs, iterating rapidly to meet evolving product requirements.

• Implement and optimize systems to ensure scalability, reliability, and performance as we grow.

• Collaborate closely with frontend engineers, DevOps, and product teams to deliver end-to-end features.

• Write clean, testable, and well-documented code, following best practices in software development and security.

• Participate in code reviews and provide technical mentorship to other engineers.

• Keep up-to-date with the latest advancements in backend technologies, contributing to our technical vision and growth.

Qualifications:

• 2-5+ years of experience in backend engineering, with at least 1 year in Rust or Golang.

• Proven expertise on working with Kafka

• Strong understanding of real-time systems, with experience building highavailability solutions.

• Proven experience in building and scaling MVPs to production-grade systems.

• Solid understanding of database design, distributed systems, and RESTful/GraphQL APIs.

• Excellent problem-solving skills, with a proactive attitude and attention to detail.

• Strong collaboration and communication skills, with the ability to work effectively in a fast-paced startup environment.

Nice to Have:

• Experience in early-stage startups, with a focus on cybersecurity or related fields.

• Familiarity with containerization, microservices architecture, and cloud platforms.

• Knowledge of other backend languages or frameworks.

Responsibilities:

• Support the QA/QC activities for civil and structural works
• Carry out QC works for works on site and provide inputs to operations team
• Ensure that the work executed is in accordance with the quality control procedures and contractual requirements
• Coordinate with client, project teams, departments and external parties
• Identify potential technical issues and provide recommendations to rectify it

Requirements:

• Degree in Civil Engineering or related discipline
• At least 5 years’ experience in similar role in the construction industry
• Candidates with previous experience working on LTA projects will have an added advantage
• Excellent team player, good interpersonal skills and a “can-do” attitude
• Ability to multi-task in a fast paced and dynamic environment

PLC Specialist

Job Description

Are you our upcoming technical service expert? Do you like to take an extra step, analyze the root cause of a failed component, and provide solutions for the cause?

Vanderlande understands the complexities associated with successful airport and parcel operations and delivers future-proof logistic process automation. These automation systems are composed of many (electro-) mechanical, IT, and controls components that require expert knowledge to support.

As a Controls Support Engineer, you have a strong affinity with Operational Technology (OT) software like PLCs and PC-based controllers and the electromechanical components they control, such as conveyors, sorters, and shuttles.

As a Controls Support Engineer, you will analyze and assist in servicing baggage handling system controls software. You are responsible for helping the operation and maintenance team find and resolve system issues, researching solutions, and proposing changes to the system. You will have frequent contact with customers, internal organizations, and suppliers.

Key Responsibilities

• Act as the primary customer contact, providing clear communication and ownership, and advising on actions to minimize downtime.
• Analyze and troubleshoot system issues systematically, developing, modifying, and maintaining PLC programs for baggage handling system control.
• Perform routine maintenance, diagnostics, and monitoring of control systems, promptly responding to anomalies, alarms, and faults.
• Collaborate with cross-functional teams to integrate control systems with other components, and evaluate and implement system upgrades.
• Ensure compliance with safety regulations, maintaining accurate records of PLC programs, configurations, and maintenance activities.
• Provide training and guidance to maintenance and operational staff, and be available for on-call duty for critical system failures outside regular working hours.
• Configure component-level devices, perform and document PLC/SCADA commissioning testing, and prepare relevant documentation such as checklists, test plans, and functional specifications.
• Lead project execution, onsite configuration, commissioning, and testing, monitoring quality of controls deliverables, and driving continuous improvement actions, including night work as required.

Qualifications and Skills

• Bachelor’s degree in electrical engineering, Automation, Instrumentation, Manufacturing, or a related field of study.
• Preferably, you have a good understanding of IT service management practices (ITIL v3/v4).
• Minimum of 5 years of experience in PLC programming and control systems within the baggage handling or airport industry.
• Experience with Siemens controls programming, software, and hardware.
• Proficiency in PLC programming languages (Ladder Logic, Structured Text, etc.).
• Basic knowledge of OT software development and maintenance.
• Strong knowledge of control system hardware, including PLCs, HMIs, SCADA, etc.
• Familiarity with relevant industry standards and safety regulations.
• Excellent problem-solving skills and the ability to work under pressure.
• Strong communication skills and the ability to collaborate effectively in a team environment.
• Experience dealing with software version control.
• Strong knowledge of PLC and SCADA systems.
• Working experience with the Siemens S7 series platform is a must.
• Experience in electrical controls hardware design and communication networks.
• Good communication skills in English.
• Assertive team player and proactive.
• Willingness to work in a 24/7 operational environment and be on-call as needed.

Job Description

1. Establish action plan for all sales promotions
2. Drive sales growth through maximization of resources and execution of market segment strategies
3. Secure active customer relation data management within the assigned area
4. Establish / Maintain campaign results report to track progress and impact of marketing initatives and take appropriate actions in case of deviation
5. Achieve sales target set by management in assigned area
6. Assist ASM in supporting channel partners technically
7. Provide market and competitor intelligence on monthly base
8. Monitor customer, competitor activity and gather general market information and feedback to headquarter.
9. Create and maintain strong customer relationship with top notch customer service.

Requirements

• Diploma/Degree in Mechanical / Electronics Engineering
• Minimum 5 years of sales experience in multi-national industrial environment, preferably with wire processing machines, and more than 3 years in sales management
• Good basic understanding in industrial machinery, automation and software
• Excellent communication, presentation, and negotiation skills
• Ability to work independently and as part of a team
• Willingness to travel overseas (up to 30% of time)
• Singaporeans only

Our client is a emergent brand name in the medtech sector. We are looking for like-minded individuals who are passionate to join them to develop their next generation of medical electronics.

Responsibilities:

• Reporting to the R&D leader in Singapore, you will be actively contributing to the Mechanical Engineering task throughout the entire product development lifecycle.
• Perform mechanical engineering tasks from concept to production for new product development.
• Support post-launch product activities such as quality improvement, cost optimization, and manufacturing troubleshooting.
• Collaborate with engineers to meet performance, reliability, and cost objectives.
• Lead quality, cost, and productivity projects using tools like Tolerance Stack, FMEA, and Minitab.
• Assume project responsibility from product design through production.
• Engage in system documentation, risk analysis, and regulatory submissions.
• Oversee testing, verification, and validation processes to ensure compliance.
• Identify design gaps and propose strategies using DFM & DFS practices.
• Conduct technical design reviews and ensure compliance with medical regulatory standards (FDA, ISO, IEC).

Requirements:

• Minimum Bachelor’s degree in Mechanical Engineering.
• More than 5 years of experience in medical devices and mechanical engineering, having worked through a complete product lifecycle.
• Experience with electro-mechanical integration and manufacturing processes (e.g., injection molding, machining).
• Proficient in 3D modeling (Creo/Solidworks), tolerance analysis, and fluid dynamics (CFD).
• Strong project management and risk-based execution abilities.
• Effective communication, proactive attitude, and a passion for product commercialization.
• Team player with excellent networking, negotiation, and interpersonal skills.

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

EA License No: 12C6254 | EA Personnel Registration No: R1879665

Customer Support Engineer

• 12 months contract
• Office location: Aljunied

We are seeking for a motivated individual who has hardware technical knowledge on x86 infrastructure enterprise products to join our dynamic team in Singapore. This position requires a strong blend of technical expertise, customer service orientation, and effective communication skills to play a crucial role in providing technical support, diagnostic testing, repair/resolution of hardware, operating system, virtualization, and infrastructure in dynamic enterprise environments.

The Opportunity

• Provide field support based on SLA (24x7)
• Perform standby duty based on rotation basis
• Provide post-sales project implementation, onsite support and coordination
• Provide break-fix support including, but not limited to, machine inspection, system checklist creation, preventive maintenance, troubleshooting and replacement of hardware level, troubleshooting of operating system, incident ownership and customer management
• Deliver high quality services and customer satisfactions to our clients
• Ensure good housekeeping of equipment residing at designated platform area and maintain the work area tidiness within the engineering area
• Provides timely update of activity list on a weekly basis
• Drive self-improvement and upkeep with the latest technologies and corporate changes on a continuous basis
• Able to work independently with minimal supervision when tasks are assigned
• Any other ad-hoc assigned by superior

Your Background

• Diploma in Information Technology or equivalent with minimum 1 year of relevant experience
• We welcome candidates with strong PC/notebook and user computing skills who are planning to transition into x86 enterprise support.
• Candidates without certification, but possessing substantial x86 hardware experience, will be considered
• Well trained in x86 based systems field engineering, troubleshooting methodology, problem determination and remedial action plan
• Familiar with either Microsoft Windows Server, Linux/Unix, Virtualization solutions and IT infrastructure
• Able to communicate clearly and concisely, both orally and in writing.
• Contributes positively as a team player and align to business goals.
• Experience in independent hardware maintenance, services delivery
• A service-oriented, open mindset
• Thrive in a fast-paced collaborative environment.
• Team player, Self-motivated and delivery focused.
• Strong problem-solving and analytical skills.
• Able to lift and move computer parts < 15KG for parts replacement.
• Able to assemble and disassemble a server or desktop computer.
• Able to perform system rack mounting with minimal support

Advantageous to have:

• Certification from Microsoft (MCSE/MCITP), VMware (VCP), CCNA and any system-based certification from principle (IBM/HP/Dell/Cisco UCS/EMC/NetApp) are a plus

• Role :
• DeltaV system hardware and software engineering – Cabinet design, IO Allocation, IO Termination,
• Wiring Schedule, BOM, Heat and Power calculation.
• Proficient in working with traditional IOs and Electronic Marshalling using CHARMs.
• Development of control logic in Control Studio by analyzing control narratives, logic diagrams, P&IDand Cause and Effect matrices.
• HMI graphics configuration and testing using DeltaV Operate
• Performed on-site FAT, including loop checks and functionality tests.
• Conducted system audits for projects before shipment
• Analysis and testing of software tools such as Bulk Edit tool, Migration tool, Engineering Analyzer, Graphics Review tool

Job Description

• Promote & sell tools, machinery and measuring equipment to relevant industries
• Develop sales channels, customer accounts, and achieve sales targets
• Propose and implement suitable technical solutions for the customer
• Provide product demonstration and basic training to customers
• Provide high quality customer experience with quick, effective response
• Liaise with suppliers for technical assistance
• Prepare daily sales activity report and provide consistent follow-up
• Travel is necessary to customer's site for demonstration and assistance

Requirements

• Candidate ideally possess a Diploma in Engineering
• Effective communication & interpersonal skills
• Possess a positive attitude, drive, and commitment towards excellence
• Disciplined and proactive with ability to work independently