Job Description:

• Responsible for executing all cargo operations on board and marine tasks, including but not limited that related to lifesaving equipment, in a safe, efficient and effective manner, as per the Marine Superintendent or Cargo Supervisor instructions, in compliance with MODEC procedures, national and international regulations and standards, liaising with client, authorities and Onshore departments, thus ensuring the unit's availability, safe operation and proper certification, contributing to the business continuity and its growth.
• Advise and participate in the execution of in all marine related activities, including but not limited to offloading, supply boat operations, cargo handling, cargo and ballasting operations, crude oil washing, tank cleaning, and all associated maintenance of cargo and ballast equipment, in order to ensure their safety and compliance with internal and external procedures and regulations, all those following the hierarchy on board in support to the Cargo Supervisor and to the Marine Superintendent. Likewise, it is co-responsible for ensuring the readiness and availability of the offshore installation's Lifesaving Appliances.
• Contribute to the unit's annual budget planning (expenses and investments), by participating of the corporate planning, providing information about resources, replacements, services and materials needs and other expenses used in its activities, liaising with the Marine team to ensure accurate information.
• Contribute to an effective response to emergencies on board by being part of the Emergency Response Team, participating in all trainings, simulations and acting properly in a real situation, in accordance with MODEC's procedures, guidelines, as well as national and international regulations and best practices, in order to minimize impacts to people, the environment, assets and the company's reputation.
• Contribute to the MODEC’s Permit to Work management systems' implementation, by acting as originator of PTWs and Perform Authority for Marine works, ensuring the correct isolation of equipment and machinery, assisting on enclosed space entry, conducting toolbox talks, guaranteeing all Marine employees and vendors working on Marine activities are properly trained and certified, in accordance with MODEC procedures, and attending, when requested, internal or external audits.
• Act proactively to safeguarding MODEC from noncompliance to legal/regulatory requirements by ensuring MODEC's procedures, management system, internal and external regulations, national and international standards are followed by both marine core crew and 3rd parties on board, participating in audits and inspections in the unit, developing and ensuring the implementation of action plans when required.
• Contribute to the continuous improvement of MdB fleet performance by participating or leading, when required, RCAs, investigations of NOIs/NODs, HAZID/HAZOPs, following up and acting upon CAPAs, sharing lessons learned and promoting a culture of continuous seek for performance and integrity enhancement opportunities.
• Guarantee the proper use of Technical Support departments, by ensuring that technical queries are properly identified, recorded in the system and always directed to Onshore departments for review/study, promoting a culture adherent to the company's systems.
• Contribute to enhance MODEC's procedures, by constantly evaluating the department activities and seeking improvement opportunities, sharing lessons learned with Technical Support departments and Operations leadership, participating in procedures' review, following MODEC's Philosophy, manufacturer recommendation, and personnel experience.
• Contribute to the proper planning of offshore activities by supporting Planner Offshore and Marine Supt in the prioritization and scheduling of services to be performed onboard, participating in discussions along with other Offshore leaderships, when requested, and duly approving all WOs for production works on the CMMS.
• Ensure the proper communication regarding the department activities developed onboard, by filling up, on daily basis, the OIM Daily Report.
• Manage stocks of spare parts, consumables, tools, Marine Gas Oil (MGO Bunker according to the agreement with Client), lubricating oils and chemicals related to Marine Department by requesting the necessary materials for the department's activities in a timely and optimized way. Assist the Cargo Supervisor on conduction of anticipated inspection of the MGO and potable water bunkering hoses, reporting in advance its condition whether it is approved for use or whether it must be removed from service.
• Communicate to the Cargo Supervisor all marine or safety systems' potential and actual incidents or defects, taking positive actions to stop hazards and unsafe behaviors, request technical advice as necessary and prepare, follow up and close out any necessary vendor assistance on board for the Marine department, in liaison with relevant leaderships.
• Contribute so that the vessel always holds valid Flag, Class and Port State certification by participating audits and inspections, supporting the Marine Superintendent and Cargo Supervisor in preparing the marine department and assisting to close out all non-conformities and observations.
• Ensure that unplanned discharges are identified, stopped as soon as possible, and reported following policy, procedures and regulations. In addition, deal with equipment, waste or other materials for disposal in accordance with procedures in place. This also includes the correct conduct of cargo venting, which should be carried out under favorable conditions, aiming to avoid plant trip, according to MdB's procedure.
• Contribute in the housekeeping of entire main deck, around accommodation decks, lay down areas and stores, controlling waste management by hosing down on regular basis and proper garbage collection, segregation and disposal.

Qualifications & Experience:

• High School Degree is required.
• Superior education is mandatory (EFOMM, or specialization course for merchant marine officers’ access degree), except for foreign Seafarers (which follow the regulations of the country of origin).
• Additional advanced training for chemical tanker or gas carrier, and additional experience on those type of tanker, and also the capacity as Chief Officer rank are competitive edge, however, not mandatory for the position.
• Minimum 1 year' experience as officer on watch (OOW) working on board the appropriate type of oil tanker, or chemical tanker or gas carrier /LPGLNG/VLCC/F(P)SOs is required.

Overall Job Purpose

To perform single or multiple specific tasks in developing and maintaining a cost control plan for a designated section of assigned project(s) or less complex assignments, and prepare relevant reporting and analysis to effectively and efficiently communicate project cost status at regular intervals.

Responsibilities:

• Collate and compile independently the necessary information to support timely cost data consolidation, analysis and reporting.
• Understand the requirements of the approved cost control procedures and ensure proper implementation in the course of work.
• Develop and maintain detailed cost control plans using Company tools and best industry practices.
• Set-up Cost Breakdown Structure and allocate budget, resources, and any other data required into the system.
• Derive and consolidate the commitments and actual costs for one or more portions of the scope of work.
• Review, analyze and update accurate forecasts for one or more portions of the scope work by using best industry practices.
• Track budget variances and challenge budget owners on any deviation from approved cost baseline.
• Generate and distribute internal cost report for part or the entire scope of work on a regular basis and as per Company standards.
• Reconcile project cost reporting with accounting and financial records.
• Review subcontractors’ invoices for accuracy and completeness and ensure that costs are allocated with the correct coding.
• Review Change Order requests and/or potential variations that impact project budget and forecasts, and maintain appropriate register.
• Establish appropriate coordination with other project functions to ensure compatibility with the Cost Control requirements and timely flow of the information.
• Contribute and participate to the Project Risk Management process by providing cost input and identifying potential budget and forecast impacts for risks’ occurrences.
• Perform cost risk analysis to define accurate contingency reserve by using company tools and best industry practices.
• Provide guidance and support to less experienced cost control staff as required.

Requirements/Qualification:

• Degree in Engineering, Science, Business Management, or Operations Management.
• AACE certification (CCT or CCP) preferred.
• 8 years of cost engineering experience in Oil & Gas industry or 12 years of cost engineering experience in other industries with understanding of technical knowledge of Oil & Gas process and FPSO projects.
• Previous working experience in a senior role is preferred.
• Experience with SAP (preferred) or different ERP system.

Engineer - Analog / RF Design [Radio System Solutions]

Job Description:

• Design of RF/Analog/Mixed-signal IC circuit blocks / IPs based on specifications (performance, area, power consumption).
• Realize IC layout with floor planning and performance considerations (with layout engineers).
• Testing & Debugging of IC prototypes (with system verification engineers).
• Support of IC to mass production ready.
• Continual support / debug of field related issues or customer IC rejects.
• IC design and performance documentation.

Requirement

• Bachelor's Degree / Master’s Degree in EEE (major in IC Design).
• Knowledge of RF/analog designs through final year project and internship are an added advantage.
• Training will be provided.

Important Note: This advertisement is not for immediate hiring but is intended to identify suitable candidates for future openings in this position.

About the team

Radio System Solutions Division develops standalone RF-IC or IPs for wireless communication products within MediaTek. This involves designing and verification of building blocks such as low-noise amplifiers, power amplifiers, filters, data-converters, phase-locked loops, low-dropout regulators and digital calibration circuits in advanced semiconductor processes. We are looking for a passionate talent who always up for challenges to join us for this exciting career journey!

In MediaTek, we believe technology changes lives and a changed life can change the world.

Joint us - Tomorrow built by you.

About Cynapse

Cynapse is an awarded AI Software Product company specializing in Enterprise-grade Vision AI in highly challenging environments. cynapse’s software platform is leveraging cutting-edge cloud/on-premise/edge platforms, advanced computer vision algorithms, advanced ML concepts & models, and more.

The company Headquarter is located in Singapore (one-north Area)

Job Description

Cynapse is looking for a talented and highly motivated Computer Vision & Machine Learning Developer to join our AI team that delivers a challenging, enterprise-scale Video Content Analytics solutions to global customers. You will conform to high standards of design and coding, working in a cutting-edge, dynamic and professionally challenging environment.

Responsibilities

• Assist in the development and training of computer vision models using state-of-the-art machine learning techniques.
• Work with large datasets for model training.
• Collaborate with engineers to implement and fine-tune models, focusing on performance, accuracy, and scalability.
• Contribute to the deployment and monitoring of trained models in production environments, ensuring robustness and reliability.
• Participate in the development and maintenance of MLOps pipelines, automating the process of model training, deployment, and monitoring.
• Conduct research to explore and implement the latest computer vision and MLOps techniques and technologies.
• Maintain and update model pipelines, ensuring they meet project requirements and deadlines.

Qualifications

• Bachelor’s degree in Computer Science, Data Science, Artificial intelligence, Mathematic, Electrical Engineering, or a related field.
• Solid understanding of machine learning concepts, particularly neural networks and their applications in computer vision (e.g., convolutional neural networks, transfer learning, and deep learning architectures).
• Proficient in one or more popular machine learning frameworks such as TensorFlow, PyTorch, or similar.
• Experienced with computer vision libraries like OpenCV, scikit-image, or equivalent.
• Strong programming skills in Python, with expertise in using tools like NumPy, Pandas, and Matplotlib for data manipulation and visualization.
• Knowledge of data preprocessing techniques, including image augmentation, normalization, and resizing.
• Basic understanding of MLOps practices, including version control, continuous integration, and continuous deployment (CI/CD).
• Strong analytical and problem-solving skills with attention to detail.
• Good communication skills, both written and verbal, with the ability to work collaboratively in a team environment.
• Eagerness to learn and adapt to new tools and technologies in the rapidly evolving fields of machine learning, computer vision, and MLOps.
• (Optional) Experience with cloud platforms like AWS, GCP, or Azure is a plus.
• (Optional) Knowledge of Docker or other containerization tools for model deployment.
• (Optional) Familiarity with MLOps tools like MLflow, Kubeflow, or similar is a plus.

Personal Competencies

• Innovative, motivated and a quick learner
• Ability to work well in a small team and take end-to-end ownership of problems and their resolution
• Attention to detail, curiosity, and passion for technology

Benefits

• Competitive base salary and a generous stock option package
• Unique opportunity to work with a talented global team on cutting edge technologies
• informal and exciting work environment with flexible hours

Due to the nature of the role, the position is considered for candidates that are only based in Singapore

Job Type: Full-time

Pay: $4,500.00 - $7,000.00 per month

Benefits:

• Health insurance

Schedule:

• Monday to Friday

Supplemental Pay:

• 13th month salary

Work Location: In person

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

ABOUT AMS

The Airspace Mobility Solutions (AMS) business, part of the Global Business Unit Land and Air Systems, is providing leading edge Air Traffic Management (ATM), Unmanned Traffic Management (UTM), Security and Digital Aviation solutions for the Commercial and Defence sectors.

The AMS business manages 11% of the world’s airspace and with revenues of over 500 million Euros worldwide, is the global market leader in airspace management solutions. In Singapore, the business focus is the delivery and support of two key ATM solutions including TopSKY-ATC(HE) and LORADS-III.

This role will initially support the Project Team of TopSKY-ATC (HE).

ROLE DESCRIPTION SUMMARY

In this role you will work in an international multidisciplinary team focused on the Verification and Validation of the TopSKY HE product in order to confirm compliance to requirements and the fitness for purpose in accordance with Operational Scenarios. You will be responsible for the design and execution of the procedures and scenarios.

KEY ACTIVITIES AND RESPONSIBILITIES

As a Sr. Verification and Validation Engineer, you are accountable for:

• Verification of the solution to confirm the system’s compliance to the Functional Baseline requirements
• Validation of the solution to confirm the system’s fitness for purpose in accordance with the Operational Concepts.
• Contribute in System Requirement Analysis activities to confirm requirements are testable and allocate a Verification Method(s) and Verification Phase(s), documented in the Verification Cross Reference Matrix (VCRM).
• Proactively participate in PI planning and backlog refinement including contributing to the effort estimation
• Conduct of the verification and validation tests in accordance with the Project Plan(s) and Project Schedule at the program’s relevant location (Thales ’premises, supplier premises and/or customer premises)
• Conduct of verification and validation tests during formal testing activities Acceptance Verification and Validation (AV&V) with the Customer.
• Communicate with both internal and external stakeholders for the V&V testing activities.
• Participate in System Requirement Analysis workshops, internally, with suppliers and with the Customer.
• Participate in Test Procedure Reviews and Test Readiness Reviews, internally, with suppliers and with the Customer.
• Report regularly on the progress of the testing activity against the agreed planning and budget
• Record the test results in the project Test Management System and any defects in the Defect Management System.
• Contribute to the Defect CCB by providing summary defect status and impact assessments
• Track and verify and validate defect corrections including regression testing.
• Maintain and retest test procedures as requirements are changed
• Produce Test Procedure Books and Test Reports.

· Support your Squad members (software, integration and verification)

· Support the Product Owner (PO) and Scrum Master (SM)

o Make recommendations on strategies to improve performance or productivity

o Identify risks, and proposing effective solution early and executing mitigation actions

o Provide input into the planning and coordination of program integration activities

• Contribute to the development of Policies, Processes and Procedures for the V&V activities best practice
• Leading Technical Working groups both internally and externally to define technical solutions
• Mentoring and support to all personnel involved in V&V activities, and contribute to succession plans for key V&V roles.
• Contribute to the development of V&V Engineering estimates for any modification proposals to the baseline in the context of projects/bids
• Work in accordance with the defined Thales processes and practices, and contribute to their improvement.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

Qualifications

• Degree in Engineering, Computer Science or related discipline

Essential Experience

· Test Engineering / Test Analyst experience of large, complex, real time software based systems (5+ years)

· Experience in Air Traffic Management Verification and Validation Scenario design and execution

· ATM experience in the following areas:

o Airspace

o Coordination

o ATM HMI

o Interpartition

o Adaptation/Configuration

· Experience with Air Traffic Management standards eg. ICAO, Eurocontrol, AID

· Application of domain knowledge to high value complex design, development and integration projects.

· Proven experience in conducting objective reviews of verification and validation artefacts

· Proven problem identification and analysis skills and system requirements analysis skills

· Experience in working in a multi-disciplinary integrated team environment

· A positive attitude combined with excellent interpersonal and motivational skills.

· Sound judgement and independent decision-making capability where necessary

· Excellent written and oral communication skills in English

Desirable:

· Experience in Air Traffic Management Operations

· Experience in System Engineering tools eg. DOORs, Jira

· Experience in Verification and Validation Tools eg. Vivaldi, Jira

· Experience in working in a Scaled Agile Framework (SAFe)

· International Software Testing Qualification Board (ISTQB)

· Advanced Test Analyst CTAL-TA Certification

· French Literacy

General / Special Requirements

· Assist in ensuring a harmonious work environment in all departments that you are working with by upholding Thales' key values.

· An advocate for diversity and inclusion who will be actively involved in implementing change initiatives to achieve our diversity goals

· An advocate for a culture of continuous improvement

· An advocate for Accountability, transparency and curiosity

· Comply with all relevant company Occupational Health, Safety and Environmental policies and framework and work practices with the intent of preventing or minimising accidental exposures to self, colleagues, visitors and/or the environment and to ensure a safe work practises at all times.

· Comply with all relevant Company policies and procedures.

SPECIAL REQUIREMENTS

· Occasional international travel may be required

What you will do

• Develop and review test plans.
• Develop verification environment/testbench in Module/IP/SOC level.
• Develop verification IP and reference model.
• Implement test with randomization based coverage driven verification methodology.
• Implement functional and functional/code coverage closure.
• Hands-on code/debug with UVM, SystemVerilog, Verilog and SystemC.
• Low Power verification.
• Verification automation flow.

What you will bring

• Bachelor's/Master's Degree in EEE/Computer/IC design/equivalent.
• With IC/ASIC design verification experience on SOC, Ethernet, PCIe, DDR, USB, ARM CPU.
• Strong experience and debugging ability on SystemVerilog/UVM.
• Skilled in Synopsys/Cadence/Mentor Simulator and debugging flow.
• Experience on Low Power and formal verification is a plus.
• Strong in UNIX scripting with Pyhon, Perl, makefile Cshell.
• Fast learner and a good team player.
• Candidates with more years of experience will be considered for a more senior role.

About the team

Our ASIC DV Team focus on developing full and advanced verification methodology IP/SOC. You will have chance to work on challenging projects that attractive and be immersed in leading tech e.g.: WiFi, 5G, AR/VR, AI, Cloud Networking. A comprehensive program for professional development / career growth will be provided to the new joiner and he/she will have chance to learn from the best expert in this area.

In MediaTek, we promote diversity and inclusiveness. Passionate talents who love new challenges and keen on learning new technologies, do send us your cv our way today and join our multicultural team that consists of talents from all over the world!

Site engineers are responsible for planning, marking out and levelling construction sites before any building work takes place. They also build roads, drainage systems and other vital facilities to make sure construction projects go off without a hitch.Organizing materials and ensuring sites are safe and clean.

• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

About Antina

Founded in 2020, Antina is a JV between Starhub Mobile and M1 and is responsible for the rolling out of the 5G Standalone (SA) Radio Access Network (RAN) in Singapore for the two mobile network operators.
The Standalone 5G (SA) RAN is a game-changing ultra-high speed, low-latency network, and one which will enable new use cases across entertainment, cloud gaming, transportation, education and healthcare. 5G is used across three main types of connected services, including enhanced mobile broadband, mission-critical communications, and the massive IoT.

Non-standalone 5G (NSA) was the first stage of 5G, using a new 5G radio (or 5G NR) access network overlaid on an existing 4G LTE network core. Standalone (SA) 5G uses the 5G NR access network on a brand new 5G network core. Both approaches provide value, but many of the most exciting new features and innovative use cases of 5G can only be realized through a standalone 5G network.

Purpose

The primary role of our Operations Engineer is to monitor and maintain 3.5GHz C-Band RAN systems to ensure operational efficiency and continuity for the company’s business.

Duties and Responsibilities

1. Carry out 24 x 7 daily monitoring of the 3.5GHz C-Band RAN systems’ faults and alarms.
2. Issue trouble tickets and tracked the fault resolution to ensure that any fault raised is responded to and resolved within the agreed SLA.
3. Coordinate with StarHub and M1 to develop, implement and maintain processes/procedures for daily operations, system configuration and maintenance activities.
4. Coordinate with StarHub and M1 to assess, plan, align, schedule and implement Change Request (CR) raised by StarHub and M1.
5. Generate monthly network performance and usage reports or any ad hoc reports upon request by StarHub and M1.
6. Coordinate and work with the equipment vendor, StarHub and M1 to test all gNode B software upgrade and patches with their respective 5G Core Network to ensure end to end compatibility.
7. Coordinate with equipment vendor, StarHub and M1 to schedule a mutually agreed timeline to load the software upgrades/patches to the live network.
8. Administer all system and user management functions of the 5G RAN OSS, which includes managing the access right of StarHub's, M1's and the equipment vendors, performing software and hardware upgrades, security functionalities and system maintenance (such as database maintenance).
9. For 5G Exploratory Platform (5GEP), to be the interface with IMDA to update on changes to network configurations, software versions and procedures.
10. Coordinate with StarHub and M1 to support project implementation and network expansions.
11. Interface with vendors and contractors on all operational and project support activities.

Requirements

Qualifications:

1. New graduate with NITEC, Diploma or Degree in Electrical/ Electronic/ Telecommunication or related qualification or possess at least two years of related working experience.

Technical Skills:

1. Preferable to have some knowledge in telecommunication networks, knowledge of cellular network would be an advantage.
2. Preferable to have some basic IP knowledge.

Interpersonal skills:

1. Maintain a strong learning attitude and able to keep up in a fast-paced environment.
2. Able to work independently and is also a good team player.
3. Possess good communication skills.
4. Strong commitment to work and have good initiatives.

How to apply

Apply here via myCareersFuture or send your CV directly to [email protected].

Antina is a company driven by ability and hardwork. We adopt fair employment practices and employment decisions will be based on merit, qualifications and abilities. Antina does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Visit our company website at www.antina.com.sg for more information.

What you do

Be part of the team that validates the physical sign-off of our chips, powering the brands we love every year with 2 billion consumer electronic products such as digital TVs, home audio devices, DVD/Blue-ray players, smartphones, tablets, networking and connectivity products, and many more. As a member of the MediaTek Physical Verification Sign-off team, you will be responsible for ensuring the manufacturability and reliability of IC designs through rigorous physical verification processes to enable the success of our chips tape-out. Join us in shaping the future of technology and making a real impact on the world!

• Responsible for assembling of various design system into a full chip.
• Perform design rule checking (DRC) to identify and resolve System-on-chip layout violations and ensure compliance with manufacturing rules and constraints.
• Conduct layout versus schematic (LVS) verification to ensure the accuracy and consistency between full chip layout and schematic of the IC design.
• Execute electrical rule check (ERC) to identify potential electrical issues and ensure the integrity of the design.
• Perform antenna and electrostatic discharge (ESD) checks to prevent potential reliability, latch-up, leakage issues.
• Collaborate with design and layout teams to address and resolve physical design issues and optimize the layout for manufacturability and reliability.
• Contribute to the development and improvement of physical verification methodologies and flows.
• Work closely with process technology teams to understand and address process-related challenges and constraints.
• Participate in tape-out activities and ensure that the physical design meets the required quality and reliability standards for fabrication.

What you bring

• Bachelor/master’s degree in Electrical/Electronic Engineering / Computer Science or equivalent
• With minimum 4 years of relevant experience
• Solid understanding of physical design concepts, IC manufacturing processes, and semiconductor device physics.
• Proficiency in using physical verification tools such as Calibre, IC Validator, or other industry-standard DRC/LVS tools.
• Experience with scripting languages such as TCL, Perl, or Python for automation and tool customization.
• Strong problem-solving skills and the ability to analyze and debug complex physical design issues.
• Excellent communication and teamwork skills to collaborate effectively with cross-functional teams.
• Familiarity with EDA (Electronic Design Automation) tools and design methodologies is a plus.
• Proficient in UNIX (Linux) platforms
• Strong communication skills, problem solving and analytical skills
• Candidate with more years of experience will be considered for a more Senior role.

Location: One North, Singapore

Who We Are

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

What you will do

1. DFT architecture exploration & evaluation for next-gen process node & package technology of MediaTek:

• Scan chain insertion & ATPG pattern generation
• Pattern validation through simulation & silicon analysis(pass/fail, shmoo, fail log, etc.)
• Diagnosis to help manufacture process improvement

2. Co-work with SoC architect, RTL designer, physical design engineer, and package engineer to define best architecture for 3D-IC:

• PPA(Performance/Power/Area) impact analysis & mitigation via DFT innovation
• Develop & integrate DFT-related RTL design modules to test chip

What you will bring

1. Master's Degree in EEE/ EE/ CE
2. Expertise in Synopsys and/or Mentor DFT tools, and HDL simulators like Synopsys VCS
3. Fluency in script language including but not limited to TCL/Perl/Python
4. Experience about MBIST with state-of-the-art SRAM structure & EDA tools is big plus
5. Skill for RTL design & integration, and physical failure analysis(PFA) will also be plus
6. Ability to think and work independently with different teams
7. Interest in understanding more details in entire design flow
8. Ability to use English for discussing technical details
9. More than 4-year industrial work experience is preferred

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The job holders are to work with PI and the research team to process air quality data and study small-scale dispersion of airborne pollutants in urban environment.

Qualifications

One or more of (but not limited to) the following:

• Bachelor Degree in Engineering or relevant field
• Experiences of (small-scale) simulations of air pollutant dispersion, meteorology modelling, data processing
• Demonstrating as a fast learner of conducting literature study and literature summary
• Experiences of handling big data via R, Python, Matlab, etc.
• Experience with UNIX-based operating systems and bash script or similar
• Strong interests in applying machine learning models and applications to atmospheric research
• Proactive in assisting and contributing to quality scientific research publications
• Proficient in technical presentation, slide making, report writing, etc.
• Proven rounded and effective team player with strong initiative and ownership of the research project

• Designing and developing: Designing, developing, installing, managing, and maintaining equipment for monitoring and controlling engineering systems
• Ensuring safety: Ensuring that systems and processes operate effectively, efficiently, and safely
• Collaborating: Working closely with colleagues across several functions, including operations, purchasing, and design
• Preparing documents: Preparing and maintaining engineering project schedules, documenting and controlling engineering deliverables, and writing reports and documentation
• Analyzing data: Analyzing and interpreting data
• Providing technical support: Providing technical support

This position requires the applicant to be responsible for engineering and technical aspects within every project.

He/She will schedule, plan, forecast, resource and manage all the technical activities aiming at assuring project accuracy and quality from conception to completion.

Job Scope:

Execute and revise project work plans to cater to changing needs and requirements

Supervise subcontractors’ works to ensure timely completion and adhere to various standards

Liaise with clients, senior engineers in preparation for site work and plan schedules

Keep Project Manager well informed of status of project and coordinate communications between various departments

Liaise with the design specialists on drawings, amendment and re-submission to clients

Assist in conducting site measurement and inspections

Communicate with subcontractors and other suppliers

Monitor the delivery schedule of equipment/material to site

Coordination and checking of engineering deliverables.

Prepare and submit project documents

Attend site and office meetings and prepare progress reports

Job Requirements:

Minimum Diploma in Civil and structure or equivalent

Fresh Graduates welcome

Keen to learn, possess positive attitude and able to work independently

Competent in MS Excel and Words

Working hours: Mon to Fri: 9am to 6pm, Sat: 9am to 1pm

Required to work on construction sites

Eigen Energy is a systems integrator for solar energy and electric vehicle charging infrastructure, with technical competencies in engineering and construction, energy management, software engineering and cross platform integration.

We are looking for a Assistant Engineer to assist with the scheduling, planning, forecasting, resourcing, and managing of technical activities to ensure project accuracy and quality. The Project Engineer is responsible for the engineering and technical disciplines of ongoing projects and will establish inspection criteria for the proper implementation of all the elements of a project.

Roles & Responsibilities

• Lead installation team to carry out solar panel installation works which include installation of solar panels on the roof, installation of solar PV inverter and connection to the existing electrical switch board
• Manage multiple solar installation projects across Singapore
• Liaise with client, contactors and internal teams to ensure ontime project delivery
• Execute project installation with the M&E shop drawings provided by engineer
• Assist with ad-hoc duties if needed

Requirement:

• Minimum 2 years of working experience in electrical engineering, solar field is preferred
• Able to read and understand M&E shop drawings
• Able to work outdoor, under the sun

Procurement Specialists build vendor relationships to secure the best prices on products for their company, as well as these other responsibilities:

• Purchase goods or services that meet the quantity and quality expectations of the organization
• Evaluate and negotiate contracts with vendors
• Track inventory and restock goods when needed
• Stay up to date on industry trends and new products
• Compare available goods with industry trends to determine appropriate pricing
• Mechnical back ground , preffer to have Piping and pressure Vessel product experience.

Job Title: Senior Maintenance Engineer (ID8358)
Location: Bukit Batok, Singapore
Working hour: Monday to Saturday, 8am to 8pm, however sometimes may required to work at off duty hours according to operation arrangement
Salary: $5500 - $6000

Job Description:
-Coordinate maintenance activities for facilities and equipment to ensure optimal performance and minimize downtime.
-Ensure the proper functioning and maintenance of machinery and equipment (such as genset, excavator etc) to support production and operational requirements.
-Coordinate tasks and resources across machinery & equipment maintenance team, and logistics & operations team to meet operational goals and deadlines.
-Oversee and ensure the Operations and Logistics adhere to safety measures during operations.
-Address operational issues and challenges, implementing solutions to maintain efficiency and productivity.
-As team leader in performing daily task, inclusive of daily reporting.
-Prepare & maintain machinery reporting & documents.

Requirement:
- Minimum of 2 – 5 years of experiences in excavator, heavy land machinery and equipment field.
· Possess knowledge on the procedures in maintenance of equipment & land machinery.
· Possess knowledge in logistics and operations will be advantages.
· Basic IT knowledge on software operating.
· Proficient in Microsoft Office application (Word, excel, powerpoint etc).
· Valid class 3 driving license (optional).
· People oriented, task oriented and possess positive work attitude.
· Strong organisational and communication skills.
· Ability to multitask, prioritize tasks, and manage time effectively.
· Problem-solving abilities and attention to detail.
· Willingness to travel to various project sites as required.

Job Title: Marine Technical Engineer (ID8359)
Location: Bukit Batok, Singapore
Must have technical and operations knowledge on marine vessel operations & maintenance
Salary: $3400 - $5000

Job Description:
- Managing and Overseeing daily vessel operations, including movements, documents and risk management.
- Ensuring compliance for Port state.
- Handling and checking ship and cargo documents, including customs compliance for international shipment, raise purchase procurement and purchase order for vessel request maintenance and repair.
- Tracking and reviewing of approved purchase requisition for all vessel.
- Assisting relevant departments with claims such as demurrage, cargo shortage, and commercial.
- Submitting monthly statistical reports, including operating rate statistics, demurrage and voyage reporting.
- Improving ship efficiency and reduce operational risk
- Engaging and deploying sea staff for vessel assignments.
- Managing planned maintenance system (PMS) repairs and maintenance activities documentation and report filling into marine department archive.

Requirement:
- Bachelor’s degree in Marine & Offshore Engineering, Mechanical Engineering, or a related field.
- Knowledge of international maritime regulations and environmental standards.
- Minimum 3-5 years hands-on experience with vessel operations, maintenance, or technical troubleshooting.
- Willingness to travel and work in challenging environments (e.g., shipyards or offshore).
- Proficient in English (Spoken and Written) & Microsoft Office.
- Team player and able to work within time constraints.
- Strong sense of integrity and professionalism.

Job Description:

• Responsible for developing and optimizing ion-implantation and rapid thermal anneal (RTA) processes to support IME's various program requirements.
• Responsibilities include diagnosing malfunctions and using test equipment or software to test faulty hardware parts, applying knowledge of the functional operation of the Ion implanter and RTA equipment.
• Collaborates closely with vendors to optimize equipment performance and reduce tool downtime.
• Setup and execute design of experiments (DOEs) at various dose, energy, tilt, and twist levels, and evaluate experimental data to meet required process specifications.
• Responsible for analyzing test data related to implant-related defect formation, and quantifying and minimizing defects.
• Champion process window characterization and evaluation to drive quality and yield improvement.
• Closely collaborate with process integration teams to implement technology roadmaps, define process capability requirements, and address structural implications and constraints related to ion-implantation and RTA processes.
• Work with fab team in establishing statistical process control for ion-implantation and RTA processes.
• Generate and present reports to both internal and external customers.

Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3 years direct industry experience in ion-implantation, RTA and SiC MOSFET fabrication is preferred.
• Extensive proficiency in medium and high energy/current ion implantation, and RTA processes, including a comprehensive knowledge of equipment, equipment parts, and troubleshooting techniques to minimize equipment downtime.
• Good understanding of wide bandgap semiconductor materials and their corresponding dopant species.
• Expertise in ion channeling, ion bombardment, and their impact on the implant species profile.
• In-depth comprehension of defect formation and annihilation processes in the implanted region of semiconductors.
• Familiarity with essential device properties resulting from ion implantation and RTA processes.
• Understanding of the hardware of ion-implantation and RTA systems is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, Ellipsometry is advantageous.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

What you do

Be part of the team that validates the physical sign-off of our chips, powering the brands we love every year with 2 billion consumer electronic products such as digital TVs, home audio devices, DVD/Blue-ray players, smartphones, tablets, networking and connectivity products, and many more. As a member of the MediaTek Physical Verification Sign-off team, you will be responsible for ensuring the manufacturability and reliability of IC designs through rigorous physical verification processes to enable the success of our chips tape-out. Join us in shaping the future of technology and making a real impact on the world!

• Responsible for assembling of various design system into a full chip.
• Perform design rule checking (DRC) to identify and resolve System-on-chip layout violations and ensure compliance with manufacturing rules and constraints.
• Conduct layout versus schematic (LVS) verification to ensure the accuracy and consistency between full chip layout and schematic of the IC design.
• Execute electrical rule check (ERC) to identify potential electrical issues and ensure the integrity of the design.
• Perform antenna and electrostatic discharge (ESD) checks to prevent potential reliability, latch-up, leakage issues.
• Collaborate with design and layout teams to address and resolve physical design issues and optimize the layout for manufacturability and reliability.
• Contribute to the development and improvement of physical verification methodologies and flows.
• Work closely with process technology teams to understand and address process-related challenges and constraints.
• Participate in tape-out activities and ensure that the physical design meets the required quality and reliability standards for fabrication.

What you bring

• With minimum 8 years of relevant experience.tronic Engineering / Computer Science or equivalent..
• With minimum 8 years of relevant experience
• Solid understanding of physical design concepts, IC manufacturing processes, and semiconductor device physics.
• Proficiency in using physical verification tools such as Calibre, IC Validator, or other industry-standard DRC/LVS tools.
• Experience with scripting languages such as TCL, Perl, or Python for automation and tool customization.
• Strong problem-solving skills and the ability to analyze and debug complex physical design issues.
• Excellent communication and teamwork skills to collaborate effectively with cross-functional teams.
• Familiarity with EDA (Electronic Design Automation) tools and design methodologies is a plus.
• Proficient in UNIX (Linux) platforms.
• Strong communication skills, problem solving and analytical skills.

Location: One North, Singapore

Who We Are

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

Job Description:

• Responsible for developing and optimizing ion-implantation and rapid thermal anneal (RTA) processes to support IME's various program requirements.
• Responsibilities include diagnosing malfunctions and using test equipment or software to test faulty hardware parts, applying knowledge of the functional operation of the Ion implanter and RTA equipment.
• Collaborates closely with vendors to optimize equipment performance and reduce tool downtime.
• Setup and execute design of experiments (DOEs) at various dose, energy, tilt, and twist levels, and evaluate experimental data to meet required process specifications.
• Responsible for analyzing test data related to implant-related defect formation, and quantifying and minimizing defects.
• Champion process window characterization and evaluation to drive quality and yield improvement.
• Closely collaborate with process integration teams to implement technology roadmaps, define process capability requirements, and address structural implications and constraints related to ion-implantation and RTA processes.
• Work with fab team in establishing statistical process control for ion-implantation and RTA processes.
• Generate and present reports to both internal and external customers.

Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3 years direct industry experience in ion-implantation, RTA and SiC MOSFET fabrication is preferred.
• Extensive proficiency in medium and high energy/current ion implantation, and RTA processes, including a comprehensive knowledge of equipment, equipment parts, and troubleshooting techniques to minimize equipment downtime.
• Good understanding of wide bandgap semiconductor materials and their corresponding dopant species.
• Expertise in ion channeling, ion bombardment, and their impact on the implant species profile.
• In-depth comprehension of defect formation and annihilation processes in the implanted region of semiconductors.
• Familiarity with essential device properties resulting from ion implantation and RTA processes.
• Understanding of the hardware of ion-implantation and RTA systems is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, Ellipsometry is advantageous.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

EDP Renewables APAC is the main subsidiary of EDP Group, a global leader in the renewable energy sector and one of the world’s largest wind producers. With its headquarters in Singapore, EDP Renewables is the leading sustainable development hub for the Asia Pacific region with activities across nine different markets. Our activities are focused on the design, development, management, and operation of renewable energy sources, namely solar, wind, as well as new technologies such as storage.

EDP is a global energy group leading the Energy Transition, Innovation and Sustainability. Using the technology of the future, we create solutions highly focused on the needs of our people and our customers, never neglecting our role and contributions to society. To achieve our goals, we aim to attract diverse people with high potential through the professional opportunities we create.

Join us to be part of a renewable energy leader that reinvests in society through sustainable projects and social as well as cultural causes. You will have the opportunity to actively participate in our global transformation, by changing tomorrow now.

Manage construction of assigned projects from start of construction to Commercial Operation Date (COD), ensuring compliance with assigned targets in terms of schedule, cost, while making sure all the internal requirements (e.g. HSE) are fulfilled.

Responsibilities

• Track and monitor project schedules and budget, flagging out any potential deviations in terms of timings and costing, using the corporate tools and platforms
• Manage contractors and other third parties in an effective and efficient manner to ensure projects run smoothly
• Identify potential risks in terms of construction and progress, making sure these are flagged to the senior project manager
• Enforce quality checklists for review or inspection of solar projects
• Manage and interact with client throughout construction

Education/Experience

• Diploma or Bachelor’s degree in Engineering
• At least 3 years of working experience in construction / installation projects
• Prior renewable energy or construction industry experience, particularly solar preferred

Core Requirements:

• Proven track record of effective communications with project stakeholders
• Good project management skills with ability to report in a clear and concise manner
• Excellent interpersonal skills with strong verbal and written communication abilities
• Skilled in project management frameworks (eg. Gantt Chart/Scrum/PMP)

When you join EDP Renewables APAC, you will have access to:

• Professional experience in a leading global company in the renewables industry with flexible work conditions
• Recognition through remuneration compatible with the role and other additional benefits
• Opportunities for personal and professional development, e.g. cross-cutting projects, mobilities and volunteering

About EDP Group:

As a socially responsible company, we incorporate our values and practices with the principles of Diversity and Inclusion. To achieve all our objectives, we intend to attract, develop and retain different profiles, assuming diversity as a key factor and differentiator of fundamental innovation in our organisation. We welcome and value all people, and we are committed to the inclusion and sense of belonging of each person who is part of the EDP Group.

What makes us proud as an employer:

• TOP Employer APAC, Singapore 2024 certification
• TOP Employer Europe 2024 certification
• Bloomberg Gender Equality Index 2021
• Top Workplaces US 2021
• Certification in Conciliation (Excellence) by the Más Familia Foundation

Essential Duties and Responsibilities

• Responsible for software development lifecycle activities, including system study, analysis, design, code, test, and deployment for product using JavaScript, TypeScript, ReactJS, Redux, HTML5 and CSS.
• Work with project team members to identify product requirements and help define project scope, objectives, and plans accordingly.
• Write, analyze, optimize, and debug product application code to maximize performance and quality.
• Create automated unit tests and integration tests.
• Write and maintain the internal tools to diagnose software component issues, improve productivity of build and release.
• Document technical specifications and functional specifications
• Participate in agile planning and scope estimation for team projects.
• Mentor and execute in Agile, Lean, and Continuous Delivery best practices.

Requirements

• BS/MS in Computer Science/Engineering or related field
• 5+ years of software development experience in user interface application development using JavaScript, TypeScript, ReactJS, Redux, HTML5 and CSS.
• Experience in turning designs into responsive UIs with ReactJS /HTML5 / CSS (LESS)
• Experience in leveraging development workflow with tools like npm, webpack and Node.js.
• Experience developing in Node.js development.
• Experience with design patterns, performance/memory analysis, multithreading.
• Agile / Scrum experience including TDD, unit testing, and continuous integration.
• Strong analysis and problem-solving skills.
• Excellent interpersonal skills including verbal and written communication skill.
• Communicates well in English.

Bonus

• Experience in WPF/WCF and MVVM programming
• Experience on creating webview2 UWP apps.
• Experience in integrating with RESTful APIs

About NSING:

As part of Nations Technologies Group, NSING was founded in 2018 in Singapore bringing high-performance semiconductor products and solutions to global semiconductor industry. Our products includes General and Secure MCU, Secure IC for TPM (Trusted Platform Module), Bluetooth Low Energy BLE and BMS (Battery Management System). When you join NSING, you will be part of a talented team in the Singapore R&D Center where we develop high performance MCU targeting for Industrial and Edge AI applications.

Your Role:
As an Embedded Software Engineer, you will contribute to the development of application test software, device drivers and customer reference software. You will be working in various aspects of the SoC development in FPGA prototyping, post silicon validation and customer reference applications.

• Work closely with SoC Design and Verification engineers to develop a comprehensive and complimentaryvalidation test plan.
• Participate in SoC design reviews to have in-depth understanding of the chip.
• Participate in PCB design review to provide requirements from software perspectives.
• Develop Hardware Abstract layer drivers for in-house testing as well as production ready SDK for customers.
• Validate new and existing hardware IP on FPGA prototype and actual silicon.
• Validate system level performance and test for robustness of SoC.
• Working with Product and Application team to develop software for the customer reference design in areas such as motor controls, Human Machine Interface (GPU), Edge Machine Learning applications.

Your Skills and Experiences:

• Bachelors or Master's degree in Electrical Engineering, Computer Engineering, or a related field.
• Minimum 3 years in firmware development in ARM-based MCU products.
• Minimum 2 years’ experience in the Semiconductor industry or equivalent technical knowledge/experience in electronics circuit design.
• Understanding of ARM architecture, heterogeneous multicore system, and communication interfaces such as USB, Ethernet, CAN, Bluetooth, SPI, I2C, UART, SDMMC will have an added advantage.
• Understanding of DVP, Graphics accelerator and machine learning models deployment.
• Worked with RTOS, device drivers, filesystems, HAL, security, and Software development cycle.
• Proficient in programming language of C, C++, and assemble language.
• Proven experience in common firmware development tools and lab tools, such as IDE (KEIL, IAR, GCC), Debugger (ULink, JLink), Lab equipment (Oscilloscopes, Programmable power supplies, Logic Analyzers etc.).
• Good with Electrical interface, schematic, electronic component specification and datasheet.

Other Skills:

• Strong analytical and problem-solving skills, with a keen attention to detail.
• Excellent communication and teamwork skills, with the ability to collaborate effectively in a cross-functional environment.
• Flexibility and adaptability and demonstrates ability to manage multiple tasks and projects, prioritizing effectively to meet deadlines.

• In-house Support IT
• Support and maintain WAN/LAN network links and equipment's
• Administration of the Servers
• Support and maintain the Firewall System
• Fault diagnosis and resolution of software and system errors on the desktop
• Fault diagnosis of desktop hardware and co-ordination of repairs and replacements
• Software installation and decommissioning of desktop hardware
• Outdoor / Onsite Project Support for IT Related Products
• Interactive Panel Firmware update
• Network Devices Firmware update
• IP configuration of network devices
• Support Product Preventive Maintenance
• Any other task assign by Superior