• Carry out equipment PM according to the plant equipment PM schedule
• Respond to breakdowns, diagnose faults and repair equipment
• Work on improvement projects to assure continuous reliability of production equipment and processes to achieve high equipment productivity and low downtime.
• Key-in SPC data for all defined equipment critical parameters
• Support all equipment installation and commissioning during plant start-up phase
• Performs other duties as assigned. Duties will vary according to the project progress and/or the specific goals of the division.

A career at our company is an ongoing journey of discovery: our 60,300 people are shaping how the world lives, works and plays through next generation advancements in Healthcare, Life Science and Electronics. For more than 350 years and across the world we have passionately pursued our curiosity to find novel and vibrant ways of enhancing the lives of others.

Your Role

As EHS Engineer you will be part of the Facilities & Logistics team of a growing BSL-2 GMP Facility (~4,000 m2) which offers Contract Testing Services for biopharmaceutical companies across the APAC region. You will be responsible for ensuring compliance to regulatory and corporate EHS requirements, and you will promote a safety, health and sustainability culture across all employees. You will also coordinate equipment maintenance and lead investigations and CAPA’s to maintain high-quality standards and ensure the safety of life-changing medicines tested at our Singapore site. This role will require close collaboration internally with Lab Operations, Quality, PMO, Regulatory and Corporate EHS.

What You Do

The position holder is accountable for performing the following functions independently, with minimal guidance:

EHS

• Manage site EHS program to ensure compliance and maintain a safety and healthy work environment. The EHS program encompasses all aspects of providing a safe workplace for its employees including WSH compliance, Fire Prevention, Emergency preparedness, hazardous material control, Biohazard safety and Hazard communication.
• Responsible for chemical safety and biosafety of the BSL-2 lab facility, waste disposal, safety equipment and procedures for managing hazardous substances and pathogens in accordance with regulations and corporate standards.
• Ensure site personnel are competent in performing Risk Assessments and ensuring needed Risk Assessments are completed.
• Responsible for applications, on-site inspections and on-time license renewal by government agencies (NEA, SPF, SCDF, AVS,..).
• Lead CTS-Singapore Safety Committee to promote and achieve a safe workplace.
• Deliver EHS orientation and training to lab employees, visitors and contractors and completes contractor work permit review before the start of work.
• Monitor and report site EHS performance indicators, recommend actions and implement CAPA’s.
• Facilitate site’s emergency response and conduct periodic drills.
• Perform periodic inspection and ensure site personnel are competent in performing safety inspections.
• Reviews safety for new materials introduced to the site and defines appropriate safety measures.
• Ensure site is prepared for and ready to respond in the event of emergency.
• Define and review site safety procedures against regulatory and corporate standards.
• Manages site security with controlled access of lab areas.
• Monitors and reports global safety indices
• Plan local implementation sustainability strategy and promote sustainability initiatives across the site.

Engineering

• Coordinate instrument maintenance with vendor and ensure documentation as per GMP/GLP/GDP requirement
• Monitor equipment maintenance and calibration contracts and work with Procurement for quotations
• Contribute to validation works including coordination with vendor new equipment installation, commissioning, retirement
• Lead investigations, write events, address audit findings and own CAPAs and Change Controls at site level.
• Lead projects impacting site level and support projects and events with global scope.

Who You Are

• Degree/Diploma in Engineering or Science related discipline
• 1-3 year of working experience in Laboratory, R&D and/or manufacturing environment
• Experience of safety management of hazardous agents and practical knowledge of statutory/regulatory requirements on safety
• 1-2 years working in a regulated environment (GMP) with experience in leading investigations, change controls and regulatory audits preferred
• Understanding of operation of BSL-2 Lab environment is preferred
• Good oral and written communication skills.
• Strong project management skills: planning, organizing, attention to detail, managing competing priorities
• Good team player embracing multi-cultural, multi-lingual and multi-time zone work environment.
• Curiosity and drive to succeed: individually and as a team; willingness to learn and lead by doing.

What we offer: We are curious minds that come from a broad range of backgrounds, perspectives, and life experiences. We celebrate all dimensions of diversity. We believe that it drives excellence, innovation, and human progress. We care about our customers, patients, and our rich mix of people. This diversity strengthens our ability to lead in science and technology.

1 Involve in design planning & understand design requirement, class compliance and scope of work;

2 Prepare/ review/ edit technical drawing/ document (2D/ 3D)/ MTO

3 Organise submission plan & ensure proper record keeping for traceability purpose

4 Effectively communicate with internal project team member, superior, supplier, as well as client

5 Participate in site visit to collate design feedback

6 Adhere to standard design procedure and protocol implemented

7 Be familiarise with latest class requirement, product specification and client requirement

8 Other ad-hoc duties as assigned.

We are looking for a Lead GTCC (Gas Turbine Combined Cycle) Commissioning Engineer, who can apply expert engineering knowledge and seasoned project / site experience to support the successful commissioning of any project in MODEC business areas including hull/topsides/mooring facilities right from preparation phase to execution phase.

Scope Of Work

• Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.
• To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.
• Develop Onshore and Offshore Commissioning Procedures for Topsides Mechanical Systems and supporting Mechanical Systems / Thermodynamic requirements for Combined Cycle systems.
• To support in developing project deliverables as per project & client requirement.
• Prepare & Review of company development work methodology / procedures.
• Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.
• Attend FAT and SAT depending on project requirements.
• Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.
• Carry forward the MODEC HSEQ policies / requirements to the team and meet overall HSEQ objectives in all projects / feedback results to corporate HSEQ team.
• Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.
• Perform duties as per directives of reporting authority.
• Leads site execution team on performing pre-commissioning and commissioning activities planned for the Topsides Mechanical systems, managing the interfaces with Construction and Pre-Operations teams, ensuring adherence to Operations safe system of work regarding all the Topsides System Commissioning SoW.
• Commissioning of Topsides Mechanical systems, Functional tests and system certification with Class Society.
• Responsible for verification and close out of all Safety critical elements associated with the package.
• Ensure all regulatory and statutory testing and requirements are performed and records are maintained.
• Perform Risk assessment for the commissioning scope, conduct toolbox meetings
• Ensure to supervise Technicians to carry out commissioning activities in a safe and controlled manner in accordance with site procedures and PTW requirements
• Manage discipline and cohesive environment in the office. Monitor / Guide all commissioning engineers/assistants/administrators.
• Day to day Planning of work, Manage schedule & targets of the project as required.
• Identify and manage resource requirement to meet schedule and targets.
• Prepare and maintain commissioning records of site observations, testing processes and checklists
• Coordination of functional testing of commissioned systems and engaging the Operations Team when and where needed
• Troubleshoot the logic function, suggest modification plan of logic diagram, liaise with I&C engineer as well as ICSS vendor, and implement.
• Execute pre-commissioning and commissioning as per procedure and sign-off respective documents with Client representative for system closure.
• Prepare timely and accurate technical report for management and a reference for future.
• Travel to offshore project sites and perform offshore commissioning / assist facility startup.
• Lead the team to perform Start-up at offshore following the start-up procedure, stabilization and performance testing.
• Ability to set priorities and meet deadlines
• Ability to problem solve with or without the guidance of senior leadership
• To conduct analytical review of complex progress reports in order to systematically identify issues and from there, address these issues in a timely manner.
• Disciplined in time management and independent in handling/prioritizing complex work requirements within the project’s stringent timelines.

Qualifications

• Bachelor Degree in Engineering (Mechanical) with 14 to 17 years work experience (or) Master Degree in Engineering (Mechanical) with 12 to 15 years work experience with minimum of 10 years work experience in onshore/offshore Oil & Gas area or FPSO line(s). Also Diploma in Engineering with 17 to 20 years work experience (making the equivalent to degree) can also be considered.
• Specialist knowledge of at least Three MODEC or related project line.
• Ability to define concepts of completion process.
• Experience in design of FPSO’s including FEED, detailed design, construction, commissioning & start-up phase.
• Experience of Topsides Mechanical Production Systems and EPCIC to handover to operations.
• Experience in Complex Gas Compression, Injection, Export Systems and Thermodynamic requirements for Heat Recovery and Steam systems, especially Combined Cycle.
• Experience in steam system Commissioning and S/U, including initial cleanup (steam blows).
• Experience with OTSG (Once Through Steam Generator) a plus.
• Experience with condensing steam turbines and specific utilities such as boiler feedwater pumps and vacuum pumps.
• Have proven project experience and skills within the field of Testing, Pre-commissioning, Commissioning execution and startup at offshore.
• Experience in offshore plant startup and stabilization and able to provide Operations with technical support throughout start-up, stabilization, and performance testing.
• Experience on commissioning and startup of Gas Compression and Gas Treatment plants.
• Experience on commissioning and startup of Water Treatment and Water Injection plants.
• Work experience within strict regulatory environments and aligning commissioning independencies with engineering compliance and contractual requirements.
• High safety awareness is mandatory. A good knowledge of managing simultaneous operations (SIMOPS) is essential.
• Significant knowledge of multiple technologies, projects and applications. Working knowledge of competing and alternative technologies.
• Familiar in use of Software, Database systems related to System Completion, Project Management (MS Project / P6) and General computer literacy (MS office).

COMPANY DESCRIPTION

1-Net manages carrier-neutral Internet Data Centers, along with providing a comprehensive range of integrated services including network connectivity, managed services, work area recovery suite, cloud and media delivery services. 1-Nets Data Center Corridor initiative currently interconnects key data centers in Singapore to facilities quick deployment and providing a diverse connectivity options for enterprises and service providers.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

1-Net is fast transforming itself into Asias Data Centre of Choice. As one of the pioneers in broadband development in Singapore, 1-Net currently manages telco-class carrier-neutral Internet Data Centres, along with providing domestic and international connectivity, managed services and media delivery services. 1-Net offers superior stability, secure delivery and service experience through its services. Its uniquely positioned in Southeast Asia, with a comprehensive range of integrated services and a media-centric approach to bring cutting edge solutions to its customers.

Responsibilities

• Manage the maintenance and daily operations of the DC facilities with the objective of achieving uninterrupted availability at all times and to ensure the fulfillment of our service commitment to customers.
• Support service delivery to ensure contracted service level agreements and key performance indicators are met or exceeded.
• Perform routine facilities activities including inventory control. Critical systems checks and functional testing. Able to respond and take action in response to facilities crisis management activities including: power outages, fire alarms, HVAC outages. Analyze data and identify trends with facility issues to determine root cause and take appropriate action.
• Respond to BMS/EMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required.
• Provide technical support to all aspects of data center operations including the operation, maintenance and repair of all mission critical equipment and systems supporting a 24x7 data center operation to achieve 100% uptime and 100% compliance with all customer SLAs.
• Assist in all site construction activities and installations, in coordination with external contractors to ensure system design, installation and testing adhere to operational standards. Witness testing of all equipment during commissioning and validate sequence of operations and receipt of all operational documentation.
• Support for customer installations, in coordination with the design & construction as well as operations requirements to coordinate customer move-in and turn-on, and other service request & deliveries.
• Maintain compliance with local workplace safety & health (WHS) standards and local electrical and building codes.
• Ensure adherence to all standard operating procedures (SOP), method of procedures (MOP), and emergency response procedures (ERP) established for the critical environments, as well as the formal change control process.
• Participate in the scheduling, coordination and completion all significant planned and emergency maintenance events for the facility and ensure these activities are executed in a controlled and proven method to ensure the reliability of the critical loads supported by these systems.
• Support various accreditation, certification and compliance initiatives such as BCA-IDA Green Mark DC/QMS/ISMS/BCMS/PCIDSS/OSPAR, etc as may be required.

• Preferably with minimum 1 year experience in Data Center Facilities Management & Operations environment and service delivery.
• ITE/Diploma in Electrical or Mechanical engineering or equivalent qualification
• 24x7 rotating shift duty
• Able to comprehend, analyse and interpret complex project documents, including AutoCAD, Visio and PDF documents
• General technical and functional knowledge of data center infrastructure to include electrical and mechanical systems, fire detection and protection systems, building management systems, equipment maintenance, space planning, construction of critical facilities environment
• Working location : 1-Net (East) at Chai Chee / 1-Net (North) Woodlands

Duties to Perform:

The Senior Chemical Engineer will work on designing, tendering, and monitoring the installation of bulk chemical and high purity chemical systems for industrial facilities in semiconductors, electronics, biopharma, and related industries. The gas systems include bulk chemicals, high-purity chemicals, slurries, and related distribution networks.

The Senior Chemical Engineer will collate the client’s capacity requirements and specifications and prepare the conceptual design, make a detailed design for system capacity, configuration, schematic, P&ID, PFD, layout, distribution, and system parameters, and prepare documents like the scope of work, reports, pecifications, standards, logistics, and detailed drawings for tender.

The Prospective Candidate will review proposals from contractors and continue to support them during installation when required. The Prospective Candidate will work closely with other disciplines such as Architects, Civil, Cleanroom, Electrical, Automation, Mechanical, and Construction Engineers, as well as CAD/ BIM designer in designing and delivering the project.

Requirements:

You should have a bachelor's degree in chemical engineering or equivalent.

You should have sound experience in designing high-purity chemicals and distribution systems related to semiconductors manufacturing or similar facilities. You should be able to comprehend clients’ URS, and design with concept design, schematics, PFDs, P&IDs, routing layout, the scope of work, specifications, and functional descriptions. The experience in designing Gas systems will be definite added advantage.

Your familiarity with the Semi standards and both Singapore and Malaysia standards, manufacturing tools, materials, and CAD/ BIM will be an added advantage. You should be able to make presentations to clients and engineers on design, tendering, project execution, supervising progress, and quality of work.

Able to Travel/ Relocate.

Duties to Be Performed:

The Senior Structural Engineer will work on Civil and Structural designs to support all life cycle of a projects from feasibility study to design and up to as-built of industrial buildings and structures. The Structural Engineer will work together with Architects to design, detailing of R.C.C & steel structures and Underground RCC structures of semiconductor fabrication plants, electronics plants, biopharma plants, and other industrial projects.

The Senior Structural Engineer will produce structural design, design options, design calculations, assessment of design options, scope of work, and specifications for industrial projects to meet the functional requirements.

The Senior Structural Engineer will work together with the BIM Modelers and Drafters to prepare designs, layouts, sections, elevations, schedules and details for submission of drawings.

The Senior Structural Engineer will attend the design and permitting meeting with clients, consultants and contractors, and will verify the design submittals from other consultants and contractors. The Prospective Candidate may be required to visit the site to support during construction, work closely with construction team, verify shop drawings and as-built drawings.

Requirements

The successful candidate shall have Post graduate degree in Structural Engineering. You should have 10 years of design experience in civil structural, preferably for industrial buildings, facilities, and cleanrooms.

You should be able to design the multi-disciplinary sub-structures and super structures. You should have worked experience with BS 8007 & BS 8002. You shall have hands on experience using the analysis & design tools like STAAD Pro, SAFE, ETABS and having Geotechnical design & Civil design experience will be a definite added advantage.

You should be able to work independently, be well organized, able to work with minimum supervision and possess a positive team attitude and interpersonal effectiveness.

Able to travel/ relocate

We're looking for a Software Engineer to join Motional’s Remote Vehicle Assistance Frontend Team. Remote Vehicle Assistance (RVA) project main goal is to overcome gaps in AV’s Operation Design Domain to allow expanded operations using a remote human operator. This involves overriding onboard AV systems (perception, planner and control), and transmitting low latency sensor and semantic data out of the vehicle.

What you’ll be doing:

• Develop and enhance Motional's Remote Vehicle Assistance software
• Collaborate with UX designers, Product Managers, System Engineers and other teams for solving complex problems
• Translate UI designs into UI code components
• Design and implement unit tested code based on system requirements
• Investigate, Debug, and fix software issues or any general issues affecting RVA software

What we’re looking for:

• Excellent modern C++(11 onwards) development skills
• Experience with graphics programming using any game engines or low-level graphics API (OpenGL/Vulkan)
• Experience with Qt Framework and QML for creating custom looking UI components
• Strong software design and OOP skills
• Experience in GUI application development
• Experience writing unit tests
• Experience with linux ubuntu OS

Bonus points:

• Experience with test automation preferably using Squish is a huge plus
• Experience debugging GUI and 3D graphics applications is a huge plus
• Experience with Boost library
• Experience with Bazel build system
• Experience with python and/or shell scripting

Responsibilities

• Responsible for managing and leading Engineering Team
• Responsible for leading the team to identify and reduce waste, improve process time utilization and cost reduction initiatives to increase manufacturing productivity
• Responsible for timely and accurate completion of manufacturing routing for turn- key production work order

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Precision/ Machining/ CNC Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for developing applications for projects including graphics, reports and calculations
• Responsible in conducting internal testing and acceptance tests and user training
• Responsible for preparing documentation including design specifications and manuals
• Responsible for providing high quality technical support to our customer
• Responsible for conducting onsite routine health check of the systems installed at customer base and documenting troubleshooting and problem resolution steps

Requirements

• Min Diploma in Computer Science or relevant
• Min 2 years of working experience in Project Management in SI Industry
• Proficiency in programming like Visual Studio, ASP and Java, MS Office with VBA and industrial automation is an advantage
• Knowledge in Microsoft SharePoint 2007/2010 (MOSS/WSS) is an advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Role Purpose:

With minimal guidance, to prepare the fundamental engineering deliverables of Process engineeringfor the assigned project as per the specified technical requirements, timelines and budget. To identify recurring basic engineering issues and resolve them.

Key Accountabilities:

• Understand technical requirementsUnderstands the basic and essential specifications and requirements of the assigned project and Industry Standard, Classification Society and Regulatory requirements.
• Engineering document preparationPrepares and marks up the PFD, P&ID, and process datasheets in accordance with design specification.
• Process calculation Performs preliminary PSV set pressure calculations, Line sizing calculations, settle out calculations in accordance with alarm set points and design limitations.
• Verification of Vendor informationPerforms verification of vendors’ information and perform necessary calculations (e.g. Scrubber level settings, strainer pressure drops) to determine if design requirements are met.
• Review of other disciplines' document / vendor documentPerforms verification of General Arrangement drawings and mark up to highlight any discrepancies in design specifications (e.g. Vessels & exchangers nozzle allocation)
• Resolution of technical issuesAssist senior engineer to develop solutions to technical/engineering and related problems by analyzing the issues/data, interpreting the analysis and proposing various options/measures using experience, precedents and professional references.
• Evaluation of vendor proposalUnder supervision of senior/lead engineer evaluates the Process requirement for other packages and contributes to technical bid evaluation process, and ensures selected vendors meet technical/engineering and delivery requirements.
• Compliance with HSSEQ policiesTo ensure business activities and decisions conform to the laws and regulations and demonstrates high standard of ethical behaviour.

Qualifications

- Bachelor or Master Degree in Engineering
- Minimum 2 years of relevant working experience in process engineering in oil & gas sector for degree holders or minimum 1 years of relevant working experience for Master degree holder.

- Proficency in English and Jap preferred to communicate with internal stakeholders.

Competencies

Technical:

- MS Office
- AVEVA Engineering
- Process simulation (e.g., UNISIM Design, etc.)
- Flare system hydraulics (e.g., UNISIM Flare, etc.)
- Fire water system hydraulics (e.g., Pipenet, etc.)
- Separation vessel performance (e.g., MySep, etc.)

Leadership

- Computational Thinking
- Problem Solving
- Continuous Improvements

Work Conditions

Work in the office and offshore site environment.

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

We are looking for a native Android developer to join our Real Time Infrastructure team at Motional. If you are someone who naturally embodies communication, collaboration, self-evaluation, and a desire to improve, placing high importance on adhering to good engineering practices, we have an opportunity that you simply cannot ignore - to shape the future of mobility!

What you’ll be expected to do:

• Collaborate with colleagues from other disciplines, including test engineers, product owners, UX/UI designers, and software engineers in our Cloud and Edge teams to define, design and ship new features
• Design and build robust codebase that enables rapid exploration and evaluation of different approaches
• Ensure the best possible performance, user experience, quality, and responsiveness of applications
• Define test cases for development testing, verification and validation
• Proactively explore and adopt new technologies for enhanced development efficiency, while staying abreast of industry trends to integrate best practices into our mobile development process

What we hope you’ll come with:

• MS, BS or BA in Computer Science / Engineering
• Minimally 3 years of native Android development experience, ideally in a product development environment
• Proficiency in Java is a must, Кotlin is a strong bonus
• Advanced knowledge of software engineering principles including requirements gathering, software design, source control management, build processes, code reviews, testing methods
• Strong knowledge of the Android SDK (including Android Jetpack) and related UI design principles, guidelines, patterns, and best practices
• Experience with third-party libraries and APIs
• Ability to analyze, identify and resolve performance bottlenecks
• Ability to work independently and as part of a collaborative team
• Excellent problem-solving and communication skills.

Bonus points:

• Experience with the Android NDK and C++
• Experience with publishing Android libraries
• Experience with LibGDX, OpenGL, Unity or Unreal Engine
• Deep knowledge of network communication principles and protocols
• Experience in multi-threaded programming, GPU programming
• Experience with functional reactive programming
• Experience with Docker and Linux as a development platform
• Experience working with both hardware and software systems is a plus

Purpose

The primary role is to monitor and maintain 3.5GHz C-Band RAN systems to ensure operational efficiency and continuity for the company’s business.

Duties and Responsibilities

1. Carry out 24 x 7 daily monitoring of the 3.5GHz C-Band RAN systems’ faults and alarms.
2. Issue trouble tickets and tracked the fault resolution to ensure that any fault raised is responded to and resolved within the agreed SLA.
3. Coordinate with StarHub and M1 to develop, implement and maintain processes/procedures for daily operations, system configuration and maintenance activities.
4. Coordinate with StarHub and M1 to assess, plan, align, schedule and implement Change Request (CR) raised by StarHub and M1.
5. Generate monthly network performance and usage reports or any ad hoc reports upon request by StarHub and M1.
6. Coordinate and work with the equipment vendor, StarHub and M1 to test all gNode B software upgrade and patches with their respective 5G Core Network to ensure end to end compatibility.
7. Coordinate with equipment vendor, StarHub and M1 to schedule a mutually agreed timeline to load the software upgrades/patches to the live network.
8. Administer all system and user management functions of the 5G RAN OSS, which includes managing the access right of StarHub's, M1's and the equipment vendors, performing software and hardware upgrades, security functionalities and system maintenance (such as database maintenance).
9. For 5G Exploratory Platform (5GEP), to be the interface with IMDA to update on changes to network configurations, software versions and procedures.
10. Coordinate with StarHub and M1 to support project implementation and network expansions.
11. Interface with vendors and contractors on all operational and project support activities.

Requirements

Qualifications:

1. New graduate with NITEC, Diploma or Degree in Electrical/ Electronic/ Telecommunication or related qualification or possess at least two years of related working experience.

Technical Skills:

1. Preferable to have some knowledge in telecommunication networks, knowledge of cellular network would be an advantage.
2. Preferable to have some basic IP knowledge.

Interpersonal skills:

1. Maintain a strong learning attitude and able to keep up in a fast-paced environment.
2. Able to work independently and is also a good team player.
3. Possess good communication skills.
4. Strong commitment to work and have good initiatives.

How to apply

Apply here via myCareersFuture or send your CV directly to [email protected].

Antina is a company driven by ability and hardwork. We adopt fair employment practices and employment decisions will be based on merit, qualifications and abilities. Antina does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Visit our company website at www.antina.com.sg for more information.

COMPANY DESCRIPTION

1-Net manages carrier-neutral Internet Data Centers, along with providing a comprehensive range of integrated services including network connectivity, managed services, work area recovery suite, cloud and media delivery services. 1-Nets Data Center Corridor initiative currently interconnects key data centers in Singapore to facilities quick deployment and providing a diverse connectivity options for enterprises and service providers.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

To manage Admin, Compliance and Building Services of 1NN and 1NE.1-Net is fast transforming itself into Asias Data Centre of Choice. As one of the pioneers in broadband development in Singapore, 1-Net currently manages telco-class carrier-neutral Internet Data Centres, along with providing domestic and international connectivity, managed services and media delivery services. 1-Net offers superior stability, secure delivery and service experience through its services. Its uniquely positioned in Southeast Asia, with a comprehensive range of integrated services and a media-centric approach to bring cutting edge solutions to its customers.

Role Profile

The Assistant Engineer shall be responsible to provide timely response, escalation and resolution to all incidents, outages and performance alerts. This includes the monitoring of 1-Nets facilities and network infrastructure and systems performance.

Responsibilities

• To perform 24x7 rotating shift duty for NOC and Network Operations.
• Changing of backup tapes based on predetermined schedule
• Preparation and compilation of team and customer weekly and monthly reports
• Process internal and external service requests including physical access, DNS changes, MS, x-connect and etc.
• Inventory Management for physical network infrastructure, x-connect.
• Provide remote hands service and onsite support to internal and customers
• Liaising with end users and vendors/Telco providers on network implementation, requirements and maintenance support
• Manage vendors or contractors in Meet-Me-Room, Cabinets and Client premises when services are required
• Responsive to troubleshoot and solve L1 Data Center and customer network issues
• Perform physical network infrastructure deployment and cross connect provisioning for internal and customers requirement
• Report to Telco Helpdesk for suspected circuit problem.
• Maintain concise and up-to-date network documentation including: Network inventories, processes, policies and procedures
• Collect and manage the statistics collection and application from the network systems
• Generate accurate and informative network analysis reports such as traffic utilization and network uptime reports

• Minimum Diploma or equivalent qualification in IT related field of study
• Must be willing to learn- No experience required as job training will be provided
• Career growth opportunities
• Able to resonate with our culture of Respect, Teamwork, Drive
• Rotating shift duty
• Basic knowledge and experience with networking protocols, including TCIP, RIP, TRACERT & PING Command
• Basic knowledge and experience with Structured Network Infrastructure for network Layer 1 & 2 support
• Pro-active in anticipating and resolving issues in the work environment
• Customer service acumen and possess a strong sense of urgency
• Strong sense of responsibilities and accountability in the work performance
• Working location : 1-Net (East) at Chai Chee / 1-Net (North) Woodlands

Responsibilities

• Responsible for evaluating and qualify products to fulfil customer expectations regarding reliability, usability, and operating life

Requirements

• Min Diploma in Engineering
• Min 2 years of working experience in failure analysis of metals and materials related products
• Experience with test or life cycle management tools an advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

EOS Defence Systems Pte Ltd has a requirement for an experienced opto-mechanical engineer to join a dynamic R&D team as a Principal Opto-mechanical Engineer in the areas of developing advanced high power and high energy laser systems. The work is challenging, and applicants should be technically capable and experienced to work on the design and development of opto-mechanical technologies and assemblies. Applicants must possess appropriate qualifications, with extensive experience in the areas of developing opto-mechanical technologies and assemblies for precision instruments and different laser systems are essential.

Primary duties:

1. Undertake the design of mechanical and/or opto-mechanical technologies and assemblies for high precision instruments, high power, and high laser systems.
2. Undertake design and development of new assemblies and products.
3. Undertake packaging and prototyping of different mechanical and/or opto-mechanical technologies and assemblies to meet the special requirements for different high power and high energy lasers, amplifiers, and optical assemblies.
4. Undertake installation, alignment, testing, and rectification of prototype lasers, optical assemblies, and components.
5. Provide necessary co-ordination and liaison to support the conduct of effective R&D for different projects.
6. Preparation and maintenance of high standard documentation in respect of design and development work undertaken in accordance with various quality objectives and procedures

Responsible for project management including attending meetings, coordination, design, procurement, tender participation etc. 

Respopnsible for site activities, coordination and supervision works related to engineering and systems design. 

Work with external parties and customers to plan, organize and direct activities concerned with assigned projects. 

Develop project schedules in compliance with customer requirements, deadlines and/or milestones; develop mechanisms to track schedule progress in the field; and update the schedule regularly. 

Monitor compliance to applicable codes, practices, QA/QC policies, department design standards and specifications. 

Interact daily with the clients to interpret their needs and requirements and represent them in the field. 

Perform overall quality control of the work (budget, schedule, plans, personnel’s performance) and report regularly on project status. 

Review engineering deliverables and initiate appropriate corrective actions.

Produce standard safety document such as method statement and risk assessment on assigned tasks. 

Ensure timely completion of all projects particularly the T/C schedules.

Requirements and skill 

Minimum degree :

in Chemical/Mechanical Engineering or relevant engineering field. 

At least 4 years of proven working experience as a Project Engineer or 8 years and above as a Senior Project Engineer in gas piping installation field. 

Excellent knowledge of visualizations software such as AutoCAD. 

Advanced MS Office skills. 

Good knowledge in basic piping design and P&ID drawing. 

We're looking for a Senior Software Engineer to join Motional’s Remote Vehicle Assistance Frontend Team. Remote Vehicle Assistance (RVA) project main goal is to overcome gaps in AV’s Operation Design Domain to allow expanded operations using a remote human operator. This involves overriding onboard AV systems (perception, planner and control), and transmitting low latency sensor and semantic data out of the vehicle.

What you’ll be doing:

• Develop and enhance Motional's Remote Vehicle Assistance software
• Collaborate with UX designers, Product Managers, System Engineers and other teams for solving complex problems
• Translate UI designs into UI code components
• Design and implement unit tested code based on system requirements
• Investigate, Debug, and fix software issues or any general issues affecting RVA software

What we’re looking for:

Excellent modern C++(11 onwards) development skills

• Experience with graphics programming using any game engines or low-level graphics API (OpenGL/Vulkan)

Experience with Qt Framework and QML for creating custom looking UI components

• Strong software design and OOP skills
• Experience in GUI application development
• Experience writing unit tests
• Experience with linux ubuntu OS

Bonus points:

• Experience with test automation preferably using Squish is a huge plus
• Experience debugging GUI and 3D graphics applications is a huge plus
• Experience with Boost library
• Experience with Bazel build system
• Experience with python and/or shell scripting

Responsibilities

• Responsible for performing corrective and preventive maintenance of CCTV Surveillance System
• Responsible in assisting in planning of the Preventive Maintenance Schedule

Requirements

• Min Nitec in Information Technology/ Electronics/ Electrical Engineering or relevant
• Min 1 years of working experience in computer networking, CCTV set up and Video Management System

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

AI Singapore (AISG) is a national AI programme launched by the National Research Foundation (NRF) to anchor deep national capabilities in Artificial Intelligence (AI).

The programme office is hosted by the National University of Singapore (NUS) and brings together all Singapore-based research institutions and the vibrant ecosystem of AI start-ups and companies developing AI products to perform use-inspired research, grow the knowledge, create the tools, and develop the talent to power Singapore's AI efforts.

The candidate will join a team of AI scientists, apprentices, data and software engineers/apprentices. With the team, he or she will experiment and build AI solutions that can help Singapore companies improve their businesses using AI.

The Senior Engineer/Tech Lead will be expected to provide technical leadership, drive collaboration with cross-functional teams within AI Products to design and resolve complex issues, engage stakeholders, manage, mentor and guide junior engineers in the projects.

Duties and Responsibilities

• Architect and develop scalable and reliable software and system applications/frameworks using engineering best practices and AI technologies
• Drive and maintain engineering, coding and DevOps/MLOps/CICD best practices, and documentation standards
• Work closely with Product Manager(s) to engage stakeholders, scope and drive product deliverables through Agile methodologies
• Utilise problem-solving skills to address and resolve user issues, with a focus on empathy
• Drive collaboration with cross-functional teams within AI Products to design and resolve complex issues
• Keep abreast of, and be able to evaluate application of technologies and trends in software development best practices and architectures (in software / AI)
• Manage, mentor and guide a team of engineers in the projects
• Contribute to community engagement activities such as sharing via technical session meet-ups and article write-ups, and participating in discussion forums

Qualifications

1. Degree in computer science, machine learning, AI, and other related fields
2. Experience in applying software design patterns to build scalable and reliable software systems
3. Experience in developing, deploying and maintaining production systems/APIs on cloud platforms such as AWS, Google Cloud, or Microsoft Azure
4. Experience in AI/Machine learning frameworks such as Tensorflow and Pytorch
5. Experience in driving software development using Agile methodologies
6. Experience with leading other engineers in a software development project
7. Experience with applying best practices to source code repository management
8. Previous working experience in Large Language Models will be advantageous
9. Previous experience in contributing to open-source projects will be advantageous
10. Data story-telling, information visualisation/UX and technical writing skills

Responsibilities

• Responsible managing waste water plant & DI water plant with existing chemistries, instrumentation.
• Responsible for providing technical support to the plating department water treatment, laboratory and engineering and
• manufacturing activities
• Responsible for leading the water treatment section to resolve all issues related water.

Requirements

• Min Degree in Engineering or relevant
• Min 3 years of working experience in manage water treatment system

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for developing of test scripts, issues tracking and test management
• Responsible for conducting qualification test of new product or revised component with issuing of test report and recommendations to the test findings
• Responsible for testing accordance to applicable product standards, guidelines, regulations and dormakaba Corporate Standard (DCS)
• Responsible for preparation of samples and coordinate with PQS EN or certification bodies for product certification
• Responsible for evaluating and analysis of competitors’ products – teardown analysis, VA/VE

Requirements

• Min Diploma in Engineering or relevant
• Min 2 years of working experience in production quality or test lab.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for developing applications for projects including graphics, reports and calculations
• Responsible in conducting internal testing and acceptance tests and user training
• Responsible for preparing documentation including design specifications and manuals
• Responsible for providing high quality technical support to our customer
• Responsible for conducting onsite routine health check of the systems installed at customer base and documenting troubleshooting and problem resolution steps

Requirements

• Min Diploma in Computer Science or relevant
• Min 2 years of working experience in Project Management in SI Industry
• Proficiency in programming like Visual Studio, ASP and Java, MS Office with VBA and industrial automation is an advantage
• Knowledge in Microsoft SharePoint 2007/2010 (MOSS/WSS) is an advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026