Reporting to the Senior Production Supervisor, the role of Production Supervisor would need to perform the following. 

General Function

• Immediate supervisor of all the production workers in the plant.
• To supervise, motivate, train new employees, maintain discipline, control manpower deployment, reduces overtime, maintains good working relationship with subordinates and to study ways to improve the section to increase high output and quality standard.
• To ensure workers carry out/follow up on instructions given

Responsibilities
 

PRODUCTION PLANT

• Record daily attendance and report to immediate supervisor of medical leave, absence, lateness, annual leave taken by the workers.
• Submit monthly attendance incentive/overtime to immediate supervisor for approval.
• Informed of unusual happenings major or minor incidents, accidents, hazardous situations or any other problems to immediate supervisor.
• Other ad-hoc duties as assigned

RAW MATERIALS

• Achieve the daily production schedule set target and ensure the appropriate stock of manufactured products for division are maintained.
• Ensure the procurement of raw materials and packing materials is sufficient to meet the requirement of the section.
• Responsible for production process control for the division.  Co-ordinate for product trouble shooting in plant, monitor change of mixing instruction procedures for product, if necessary.
• Responsible for monitoring the stock level of all materials and packing materials are properly identified, marked and stored.
• Ensure that the mixing instruction procedure materials as specified on the B.O.M. are strictly followed, correct use of machinery and equipment by operators must be supervised.
• Ensure that raw materials used by operators follow the B.O.M production sheet.  Any discrepancy must be rectified immediately.
• Ensure that raw materials stock is updated and an accurate physical count if and discrepancy is spotted.  Conduct physical count on all materials twice a year.

MACHINE MAINTENANCE

• Responsible for the maintenance of all the machineries and equipment in the plant are clean at serviceable condition.  Keep a record of all break-down and report of machinery malfunction.

SAFETY

• Ensure the plant is kept clean as good housekeeping should always be practised.
• Factory equipment, light, fans etc are switched off and all mixing vessels are emptied or valves secured, bungs intact before factory are left unattended.
• Responsible for training workers on handling chemical spillage and emergency response activities.  All new workers are to be familiarized with all aspects of safety, according to the new employee induction procedure checklist.  Upon completion of the induction, the immediate supervisor and the new employee must sign the form.
• Ensure that workers are instructed and follow the procedures as prescribed for hazardous-chemical handling
• To ensure that workers, visitors and contractors wear appropriate safety protection equipment within the factory premises.
• To ensure first aid kit is well maintained and replenished when necessary.
• To ensure that fire extinguisher, spill/chemicals and other safety equipment are well maintained and replenish when necessary
• Forms a part of safety committee.
• Ensure that workers are following safety procedures, rules and regulation. Report all incident and accident.
• Ensure all workers are adequately trained in the safe and correct use of machine and equipment in the plant.
• To submit the following reports to immediate supervisor:
  • Monthly production output
  • Overtime report including reason for working overtime
• Accurate compilation of workers’ time sheet

The Reliability Engineering & Automations team prides itself in keeping Visa systems up and secure, catering to the 24*7 needs of the business. The Software Engineer, a highly motivated individual contributor based in Singapore, responsible for designing and developing effective solutions in accordance with industry standards using best software engineering practices.

As part of the team, you will be required perform design, coding and testing while following the set development standards. The role requires a technologist who has the passion to solve problems, refactor existing code, learn and pick up new technologies based on the needs of the organization, and level-up on existing expertise.

Responsibilities:

• Design, create documentation, and implement new systems, as well as enhance and modify existing software while complying with design specifications, security guidelines, and coding standards.

• The individual should have a passion for delivering zero-defect code.

• Develop scalable real-time low-latency solutions in an agile delivery method

• The individual needs to effectively communicate status, issues, and risks in a precise and timely manner.

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Team Summary:

The Client Services Team provides industry-leading operational support to Visa’s clients around the world. With our deep knowledge and expertise, we bring the voice of the customer into the design, development and successful deployment of Visa products and services. We are trusted partners to Visa’s clients, providing expertise to support and successfully grow their business.

The Client Testing team is part of Visa's Global Client Services group. We deliver quality services and solutions using best-in-class processes, methodologies, and technology with our worldwide workforce. We are an integral part of revenue-generating areas within the company. This team is dedicated to its customers and to building on past achievements. We are committed to leveraging innovative technology to enhance quality and to accelerate time-to-market. Visa has one of the most visible and most used comprehensive payment systems in the world.

What a Senior Software Test Engineer does at Visa:

This is an individual contributor role responsible for identifying and resolving issues of simple to moderate complexity. This position is at an intermediate professional level and requires strong execution and analytical abilities. This role works independently and receives minimal guidance only in the most complex situations. The role will analyze and troubleshoot user requirements, procedures and problems to automate or improve existing systems under broadly defined practices and procedures, including working with developers in analyzing and developing process improvements for system administration and environmental build functions.

In this role, you are expected to:

• Be responsible for programming, testing, implementation, documentation, maintenance and support of systems application software.
• Design, create, execute and report on functional tests against multiple applications.
• Research, create and evaluate technical solution alternatives for the business needs.
• Follow standards in development and testing to ensure compliance with Audit Requirements.
• Follow Quality Control processes according to the Industry Standard practices.
• Actively look for opportunities to enhance standards and improve process efficiency.
• Identify and document software defects in a clear manner and retest using corrected code to resolve the issue in a timely manner.
• Identify and troubleshoot system issues working with development as required.
• Design, document and track test cases in tracking system.
• Identify opportunities for process improvements and efficiencies.
• Work with business representatives, IT Management, IT development, support teams and vendors to ensure on time, on budget, and quality delivery of testing deliverables.
• Coordinate and collaborate with a globally distributed team.

Why this is important to Visa

The successful candidate will be part of a team that designs and develops test designs as well as cases for the Client Testing Organization. The individual will perform functional and automation testing for Visa Processing Services applications. The role holder will need detailed analytical skills and a good understanding of the test methodologies to be able to interface directly as well as make decisions with staff members of Client Testing, Product Management, Project Management, Client Implementations and Development.

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office three days a week - Tuesdays, Wednesdays and Thursdays.

• System installation (termination) , including testing & commission
• System and device repairs both in-house and in the field service.
• On stand-by service call duty after-office hours including weekends and public holidays, on a roster system
• Conduct User operation & technical trouble- shooting trainings
• Attendance at site meetings
• Submit a daily report of activities of the day with suggestions of possible solutions.

- Bachelor’s degree in Computer Science, Information Technology, or related field.

- 3+ years of experience in network security engineering.

- Proficiency in Cisco Catalyst Switches (IOS), Cisco Nexus Switches (NXOS), and Alcatel Lucent Switches (AOS).

- Experience in configuring and managing Palo Alto and Fortinet Fortigate Firewalls.

- Hands-on experience with Alcatel Lucent Wireless Controllers.

- Familiarity with SolarWinds NPM / NCM for network monitoring and configuration management.

- Proficient in ClearPass Policy Manager for network access control and policy enforcement.

- Knowledge of network protocols, security architectures, and best practices.

- Strong analytical and problem-solving skills with attention to detail.

- Excellent communication and teamwork abilities.

Job Description：

1. Works with the front-end design team to complete the chip floorplan , clock

architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDS2, including P&R,

formal verification, static timing analysis, physical verification, power analysis, design for

reliability (DFR) and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an

automatic physical design platform.

Position Requirements:

1. Holds a bachelor degree or above in electronic engineering, microelectronics, or

computer science.

2. At least 0-2 years of work experience in the digital backend design field.

1. Hands-on project experience is required.

2. Tapeout experience at advanced technology is prefered.

3. TCL , Perl or Python script development and familiar with EDA tool design will be plus.

Job Description:

1. In charge of the preparation of reagents, calibration materials, and quality control products, strictly follow SOP, keep all records in the receipt, review, and use of raw and supplementary materials, monitor the stock condition and work with procurement team to replenish accordingly.

2. Responsible for the collection and bookkeeping of raw materials, auxiliary materials, packaging materials, etc. for production.

3. Responsible for filling in production logbook to ensure that the data is true, complete and accurate.

4. Ensure production equipment, facilities and production environment can meet production process and regulatory requirements.

5. Ensure employee working environment and quality in strict accordance with the system and regulatory requirements.

6. Strictly comply with laboratory-related operation and quality management requirements.

7. Collaborate with cross-functional teams to meet projects goals with overall organizational objectives.

8. Any other ad-hoc duties or projects as required by the management team.

Job Requirements:

1. Majoring in biology, medicine, laboratory science, immunology, pharmacy or quality engineering are preferred.

2. A bachelor's degree. Fresh graduates are welcome to apply.

3. Experience in IVD, controlled environment production, quality system, R&D and etc.

4. Expertise in the operation and maintenance of lab instruments and data systems.

5. Understand the relevant requirements of the production quality system for in vitro diagnostic products.

6. Familiar with in vitro diagnostic products such as lateral flow immunoassay, PCR, Immunoassay etc.

7. Familiar with IVD product development and commercialization life cycle.

8. Systematically project management, good planning, execution and timely communication. Good presentation skills.

9. Enthusiastic, proactive, and down-to-earth work attitude, strong communication & execution ability, results driven, and a team player.

10. Meticulous and strong sense of responsibility; able to handle stress and tight schedule.

Do you want to be part of creating a safer world? Without thinking about it, you meet us in your everyday life – at home, in transit and at work. We are at the airport, where you commute, where you work, play and shop. Diverse in our offering, our customer outreach and in our mindset, Gunnebo is leading the transformation of the security business through digitalization and connectivity for the continuous development of smart entrance control and safe storage solutions.

If you are passionate about being part of an exciting transformation journey working with a global, multi-cultural and highly motivated organization this is the opportunity for you.  Gunnebo is small enough to see your ideas come true, and big enough to realize your career goals.

About The Role

The Airport projects department of Gunnebo Entrance Control requires a Project Engineer to support its expansion in the Airport passenger processing solutions.

The candidate will oversee delivering of Airport projects globally.

They will work closely with Multiple Stakeholders, in ternal and external, in a successful delivery of projects, on time, within budget and with required quality.

The Projects they will be involved with will be in different time zones and local teams from many different cultures. The Project Engineer will also be required to support some large installation worldwide.

There will also be global travel required for this role dependent on requirements.

What You Will Do

· Work with internal Airport team (Project managers, Bid managers and Product managers) to provide technical, remote or on-site support for installation and commissioning.

· Work with internal Stakeholders such as Engineering Team, Operational teams, Global tech support teams, Spare parts teams and regional Support teams to deliver retrofit projects.

· Enhance Gunnebo documentation for Mass Transit products including and not limited to: Installation documents / O&M / Process Improvement and share all feedback with stakeholders to improve process.

· Assist on installing and testing the products during tradeshow.

· Assist with prototypes, and testing procedures.

· Drive the end to end Training for products: internal and external training

Who we are looking for

Essential

-       Ability to work within a remote multinational team

-       Being a team player with result focused approach

-       Experience in a B to B business model

-       Strong communication skills and adaptability to situations

-       Experience in working in large and complex projects environment involving integration of Hardware in IT environment.

-       Capacity to design optimal solutions taking into account ROI and limitations of each party + risk assessment.

-       Highly Structured and organized.

-       Multi-tasking and ability to work under customer pressure.

-       English fluent

Desirable

-       Previous experience in project management of integration projects within Mass Transit Environment (Airports, Metro, Intelligent Transportation, Fare Collection…)

-       Issue resolution

-       Other speaking languages

Why join us

Are you passionate about sustainability, innovation, safety, and collaboration? Our employees have ideas on how to build a safer and more sustainable tomorrow and the drive and passion to realize them. Our attention to societal trends, and our ability to translate these into business opportunities, alongside our dedication to customers, sustainability and digitalization have earned us a place among the leading companies in our industry.

We believe that building long-term relationships and integrity are keys to success. Performance driven by a forward-thinking attitude, passionate teamwork, and the strong will to continuously learn. If that describes you, we will gladly make way for your ambitions. From day one we support you with your personal growth, through challenging positions and comprehensive learning and development opportunities, in a dynamic, international and diverse and pro-active working environment.  Gunnebo is small enough to see your ideas come true, and big enough to realize your career goals.

At Gunnebo, we have a bigger mission, we are working For a Safer World. Welcome with your application.

About Gunnebo Group

The Gunnebo Group is a global leader in security offering innovative products and services to protect and control the flow of people, and to safely secure valuables. Through our businesses Gunnebo Entrance Control and Gunnebo Safe Storage we offer solutions to customers in retail, public transport, public and commercial buildings, industrial and high-risk sites and banking. We operate worldwide through our 3,400 employees, 25 country locations and 10 production facilities to serve customers in over 100 markets. Together we create a safer world.

Gunnebo Entrance Control specializes in access control solutions enabling customers increased efficiency, safety and end-user experience. Our wide range of products are designed to create a safe environment without restricting freedom of movement, whether it is to enter the lobby of a company, a store, an entertainment area, an industrial area and public transport. We shape the future of people flow management.

Gunnebo Entrance Control is an equal opportunity employer. We know that great minds don’t think alike, and it takes all kinds of minds to make our products so unique. We welcome applications from all backgrounds and employment decisions are made without regard to race, colour, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other any other dimension of diversity.

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

We’re searching for Software Engineer (C#, .NET) to be part of our diverse team of talent here at NCS!

If you believe in going above and beyond, embodying excellence, and bringing people and technology together like never before, we would love to have a conversation with you!

What we seek to accomplish together:

1. Design and Development:
   1. Lead the design, development, and deployment of high-quality applications, ensuring stability, reliability, and scalability.
   2. Derive application frameworks based on project requirements and industry best practices.
   3. Adopt AGILE methodology towards continuous enhancements to applications with reference to operation requirements and feedback.
   4. Enable integrations between applications, not limited to Active Directory, SAML, and O-Auth authentication methodologies, and utilizing WinForms and RESTful APIs.
2. Code Quality and Reviews
   1. Ensure applications and source codes comply to IM8 and OWASP standards.
   2. Establish governance for source code management, sharing and security.
   3. Provide consultancy and guidance to junior application developers to ensure on-time, and quality delivery of tasks.
   4. Emphasis on data security, including Data-in-Transit and Data-In-Storage.
   5. Collaborate with auditors on code reviews, code remediations, deployment strategies, and documentation.
3. Project Management
   1. Engage with cross-functional teams to gather requirements and define project scope.
   2. Lead the application team in prioritizing tasks across multiple concurrent projects.
   3. Monitor project progress, manage timelines, and ensure milestones are met.
   4. Coordinate with stakeholders to ensure project alignment with business objectives.
   5. Develop and maintain project documentation, including project plans, status reports, and risk assessments.
4. Troubleshooting and Maintenance
   1. Adopt a systematic approach to troubleshooting, debugging, and resolving application and code issues.
   2. Monitor application performance and implement improvements as needed.
   3. Ensure timely resolution of issues to minimize downtime and impact on users.
   4. Conduct regular maintenance and updates to ensure applications remain secure and up-to-date.
   5. Create and maintain documentation for troubleshooting procedures and known issues.
5. Data Analytics
   1. Implement data analytics strategies to drive insights and informed decision-making.
   2. Analyze application/log data to identify trends, patterns, and areas for improvement.
   3. Develop dashboards and reports to visualize key metrics and performance indicators.
   4. Utilize data analytics to enhance user experience and application functionality.
   5. Stay current with emerging data analytics tools and technologies to continuously improve data-driven decision-making.

• Able to workk at Tuas and night work
• echnical Guidance: Provide expertise during the design and implementation phases.
• Quality Assurance: Ensure compliance with industry standards, regulations, and safety codes.
• Troubleshooting: Diagnose and resolve technical issues that arise during the project lifecycle.

Team Coordination: Work closely with architects, civil engineers, and other project stakeholders.

• Client Interaction: Communicate progress and address client concerns or changes in scope.
• Meetings: Organize and participate in project meetings to discuss status, challenges, and solutions.

Site Management

• Field Supervision: Oversee installation and commissioning of electrical systems on-site.
• Safety Management: Ensure adherence to safety practices and protocols during project execution.
• Inspections: Conduct regular site inspections to verify compliance with design specifications and quality standards.

We are seeking a highly motivated and talented individual to join our team as an End User Computing (EUC) and Information Technology (IT) Service Management Engineer. This role will involve assisting the Head of EUC on all IT EUC activities and facilities, to ensure users can effectively and productively use established and / or new innovative collaboration technologies, maintain good user experience, including AI/ML, office automation tools, desktop, and mobility technologies.

The ideal officer will have practical knowledge and experience of EUC, working experience in IT Infrastructure Library (ITIL) processes implementation, proficiency in ServiceNow workflows and dashboards, and preferably experience with identity management integration. You will assist the Head of EUC to manage vendors, optimize processes and target high impact / severity issues for resolution and follow ups. You will also contribute to driving simplification and optimization of IT Service Management processes, including adoption of AI/ML and automation solutions to improve key areas related to EUC and ITSM. You must be passionate about technology and embrace changes. You must be a good communicator being comfortable to communicate effectively to all levels and types of employees.

[What you will be working on]

•                 IT Service Desk Management: Manage the IT service desk team, ensuring efficient and effective handling of user inquiries, incident resolution, and service request fulfilment, while maintaining high levels of customer satisfaction.

•                 IT Service Management (ITSM): Assist in the adoption and adherence to ITIL/ITSM best practices and standards, identifying opportunities for simplifying and optimizing processes and driving implementations to streamline processes and improve efficiency and visibility.

•                 Assist in the drive for adoption of innovative AI/ML and automation solutions to improve work processes and productivity of the team and colleagues in the organisation.

•                 Manage selection, deployment, and management of end-user computing devices, such as desktops, laptops, mobile devices, and peripherals, ensuring optimal performance, security, and user experience.

•                 Support modernisation of the workplace environment to increase productivity & efficiency and support in the digital transformation journey

•                 IT Governance and Compliance: Ensure ITSM and EUC practices comply with IM8 and CSA, security standards, and internal policies, taking appropriate measures to mitigate risks and ensure data protection.

•                 Manage all IT assets and configurations of the infrastructure and services to ensure that they are all accounted for, which will facilitate effective and efficient change management and problem management activities.

•                 Ensure incidents and requests are met and delivered within SLAs

•                 Perform root cause analyses to eliminate underlying problems of high impact incidents and/or prevent recurrence of incidents.

[What we are looking for]

·        Bachelor’s degree in IT, Computer Science, or related field.

·        Minimum of 2 years of working experience in EUC support.

·        Minimum of 2 years of working experience as a practitioner in the following ITIL processes.

a)      Change Management

b)     Asset Management

c)      Service Level Management

d)     Incident Management

e)     Problem Management

f)       Request Fulfilment

·        Proficiency in using and designing ServiceNow workflows and dashboards.

·        Practical experiences in managing system integrators / contractors / partners

·        Good understanding of end-user computing technologies (Windows, Active Directory, Azure AD, O365, VDI), including desktops, notebooks, mobile devices, and productivity software.

·        Experience in managing collaboration tools (Office 365, Video Conferencing, Telephony) for the employees.

·        Willing to embrace changes and new technologies.

·        Strong analytical and problem-solving skills.

·        Excellent communication and interpersonal skills.

·        Ability to work effectively in a team environment and collaborate with cross-functional teams.

·        Experience in handling and supporting senior management users (including Management Committee members) and internal senior managers is a plus

·        Experience with public service sector or GLC and possesses ITIL / PMP Certification is a plus

·        Microsoft Certified: Modern Desktop Administrator Associate or equivalent certification is a plus.

·        ServiceNow Certified System Administrator (CSA) certification is a plus.

The remuneration package will commensurate with your qualifications and experience. Interested applicants, please click "Apply Now".

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.
• Contract Staff enjoys the same benefits as Permanent Employees.
  

YOUR ROLE

In a context of significant growth, we seek for a talent and semiconductor/power testing passionate!

You'll join a multi-site product and test engineering team responsible for power discrete SiC (Silicon Carbide) diode portfolio. The SiC rectifier division core team is in Tours (France). For this position, you'll be based in Singapore and your role will be to support the division for the development of those high-performance rectifiers and the constant quality improvement plan: from wafers start in the flow up to the final test on diode housed into the package.

Responsibilities

• the review with local teams of the industrial changes impacting SiC diode production and participate to qualification plan definition, data analysis and milestones deliverables following quality standards and customer requirements.
• follow up all the engineering materials (technology/new product/industrial changes related) running in clean room (diffusion & EWS) to track their cycle time, to schedule the testing and the analysis, up to the disposition for back-end activities (assembly/final test trials)
• project leader for the execution of the electrical wafer sorting roadmap for SiC diodes to use the most advanced test equipment and advanced test solution.
• the analysis of electrical wafer sorting data for non-conform material and lead the board to propose most relevant disposition based on non-conform material analysis to build and sustain a data base of the either process or electrical signature and address the issues by a plan defined with a cross functional team.
• the development of statistical based routine to better detect outlier device.

The perspectives around Silicon Carbide are tremendous and will allow you to evolve in a very dynamic and fast-paced world of power devices. This job means a lot of interactions between Singapore, Tours and Catania in a multidisciplinary team.

YOUR SKILLS & EXPERIENCES

• A wide set of technical skills are required: Project management, Front end and Back end process, industrialization, electrical test, statistical analysis.
• Soft skills are key for efficiency: communication, synthesis, flexibility, team spirit, reactivity & sense of urgency, customer focus, and problem solving.

Key Responsibilities:

• Work closely with IC design & product development teams to develop a deep understanding of new products’ characteristics and features.
• Architect, design, and implement new sensing features and algorithms that align with products, solutions, or customer requirements. Additionally, develop use models and application demonstrations for sales and marketing promotion.
• Create application notes, white papers, and technical documents to provide information and support to customers.
• Develop evaluation kits and demonstration kits for new sensing products, and conduct testing to evaluate results. Create and maintain documentation.
• Conduct application training for internal teams on new products.
• Provide feedback to the design & development teams by communicating customer needs, issues, and opportunities that can be used in new product development and design.
• Collaborate with IC design and product development teams to plan and conduct system-level evaluations in support of new product development.

Requirements:

• Bachelor's degree in electrical, electronics, or related engineering.
• Minimum 8 years’ experience in R&D/Application/Embedded System/Product Development environment.
• Proficiency in common programming languages (C, C#, Python, etc.) and development platforms (Raspberry Pi, Arduino, Wireless-SoC, etc.).
• Experience with tools such as IDEs, in-circuit emulators, and oscilloscopes.
• Strong technical knowledge of optoelectronics devices and sensor applications and experience in optical-related test and characterization, is desirable.
• Experience with machine learning frameworks is a plus.
• Excellent written and verbal communication skills.
• Experience with customer support and training.
• Ability to work effectively in a multidisciplinary team environment.

Key Responsibilities:

• Work closely with IC design & product development teams to develop a deep understanding of new products’ characteristics and features.
• Architect, design, and implement new sensing features and algorithms that align with products, solutions, or customer requirements. Additionally, develop use models and application demonstrations for sales and marketing promotion.
• Create application notes, white papers, and technical documents to provide information and support to customers.
• Develop evaluation kits and demonstration kits for new sensing products, and conduct testing to evaluate results. Create and maintain documentation.
• Conduct application training for internal teams on new products.
• Provide feedback to the design & development teams by communicating customer needs, issues, and opportunities that can be used in new product development and design.
• Collaborate with IC design and product development teams to plan and conduct system-level evaluations in support of new product development.

Requirements:

• Bachelor's degree in electrical, electronics, or related engineering.
• Minimum 3 years’ experience in R&D/Application/Embedded System/Product Development environment.
• Proficiency in common programming languages (C, C#, Python, etc.) and development platforms (Raspberry Pi, Arduino, Wireless-SoC, etc.).
• Experience with tools such as IDEs, in-circuit emulators, and oscilloscopes.
• Strong technical knowledge of optoelectronics devices and sensor applications and experience in optical-related test and characterization, is desirable.
• Experience with machine learning frameworks is a plus.
• Excellent written and verbal communication skills.
• Experience with customer support and training.
• Ability to work effectively in a multidisciplinary team environment.

Key Responsibilities:

• Work closely with IC design & product development teams to develop a deep understanding of new products’ characteristics and features.
• Architect, design, and implement new sensing features and algorithms that align with products, solutions, or customer requirements. Additionally, develop use models and application demonstrations for sales and marketing promotion.
• Create application notes, white papers, and technical documents to provide information and support to customers.
• Develop evaluation kits and demonstration kits for new sensing products, and conduct testing to evaluate results. Create and maintain documentation.
• Conduct application training for internal teams on new products.
• Provide feedback to the design & development teams by communicating customer needs, issues, and opportunities that can be used in new product development and design.
• Collaborate with IC design and product development teams to plan and conduct system-level evaluations in support of new product development.

Requirements:

• Bachelor's degree in electrical, electronics, or related engineering.
• Minimum 5 years’ experience in R&D/Application/Embedded System/Product Development environment.
• Proficiency in common programming languages (C, C#, Python, etc.) and development platforms (Raspberry Pi, Arduino, Wireless-SoC, etc.).
• Experience with tools such as IDEs, in-circuit emulators, and oscilloscopes.
• Strong technical knowledge of optoelectronics devices and sensor applications and experience in optical-related test and characterization, is desirable.
• Experience with machine learning frameworks is a plus.
• Excellent written and verbal communication skills.
• Experience with customer support and training.
• Ability to work effectively in a multidisciplinary team environment.

As a Syscon Engineer , you will be responsible for the implementing of large-scale IT/ Engineering projects with quality, within scope and to ensure deliverables are on time and conform to processes and standards meeting customer’s requirements. 

What will you do? 

Fault management

• To monitor any fault alarm generated from the Network Management System (NMS);
• To identify the nature and type of the network failures whenever a fault alarm is generated or a fault is reported, and to execute the appropriate corrective actions to ensure minimum disruption to the network;
• To seek approval from the user’s representative on the remedial actions should such actions entail disruption to the network or the allocation of resources;
• To report the fault to the Maintenance Agency (MA) when the fault cannot be resolved at the NOC level;
• To liaise with the MA directly to isolate or rectify the fault reported; 
• To provide interim update of a fault via SMS or phone to the user until the fault is closed;
• To document the number and types of faults occurred and the process and action taken to resolve the problem;
• To perform daily checks with the aid of NMS to ensure all sub-systems are in proper physical and working condition;
• To backup data of the NMS and to restore it when necessary.
• To carry out the MA’s recommended periodic preventive maintenance of the sub-systems and its equipment at all sites to ensure network functionality and the equipment are in working order;
• To perform periodic testing of the main and backup switching equipment to ensure all sub-systems are functioning properly.

Configuration Management

• To maintain an up-to-date physical and logical configuration of the sub-systems with proper and accurate documentation;
• To maintain and manage the numbering plan for all system end-user terminals;
• To perform network reconfiguration for operational role changes that does not involve additional hardware or swapping of equipment boards upon instruction from the user;
• To perform network and new services configuration;
• To track and report to the user any unauthorised equipment, hardware, applications, relocation, etc. regarding the overall configuration of the system.

Administration Management

• To receive calls from end-users on all aspects of the system such as fault reporting, network consultation, etc.;
• To keep end-users informed of such events like network failure, network maintenance, network testing, password changing, etc. so that end-users are given adequate notice in advance to prepare themselves;
• To issue Repair Report Forms (RRF) and/or Anomaly and Improvement Forms to MA for its further actions;
• To be responsible for the proper maintenance and documentation of all the maintenance and operating manuals;
• To activate the user’s representative after office hours should there be any anomalies in the sub-systems that require their intervention or advice or if such anomalies result in adverse operational impact;
• To liaise with building owners for access;
• To provide shift report on all related incidents that happen during the shift;
• To provide monthly updates of the sub-systems status to the user and ad-hoc reports when so requested by the user;
• To maintain the stock inventory management system to track all equipment movement in/out of NOC located in the main site.
• Performance Management
• To collect and compile network statistics periodically, and to analyse the statistics collected. The network performance results together with recommended solution to improve network performance, if required, are to be provided to the user;
• To track the performance in terms of the Reliability, Availability and Maintainability (RAM) of the various sub-systems with MA. Such task includes tracking the response time and turnaround time of the MA upon activated;
• To recommend to the user necessary actions to be taken to enhance the performance of the sub-systems;
• To assess and decide on the need to fine-tune the sub-systems based on the performance results submitted and recommend technical solutions to the user.

Security Management

• To ensure that all components of the sub-systems located at NOC (NMTs, equipment of all sub-systems, equipment rooms, etc.) are physically secured according to the security guidelines set out by the user;
• To monitor the sub-systems against any unauthorised network access and to track down for such unauthorised access to the network.
• To perform periodical change in password access control to the sub-systems according to the IT security requirement;
• To desensitise system terminal equipment;
• To reload terminal software;
• To monitor the overall security of the system and to report any possible breach to the user;
• To recommend to the user the necessary actions to be taken against any unauthorised network access;
• To assist the user in safeguarding and restricting access to all the security related information;
• To plan and recommend to the user the periodical change in password access control for the sub-systems;
• To assist the user in system security keys renewal;
• To assist user in tracking the loss of system user terminals.

Project Support

• To assist the user in project planning and to provide network operations advices to the user’s project team; 
• To assist the user in conducting verification tests/trials during project run-in phase;
• To perform network and new services configuration; 
• Put to service new system user terminals.

Consultancy Services

• To provide consultancy services in technical and tactical operations of the sub-system;
• Study and analyse in detail the sub-systems on the business continuity planning;
• Support the user in the ad-hoc studies on the network capacity and capabilities.

General Support Management

• To advise and support the user in the planning and execution of special operations that involves allocation, configuration and deployment of system resources.
• To formulate network recovery procedures in response to all possible failure scenarios for approval by the user. Such failure scenarios include example like network degradation on fallback modes and the total failure of the main NOC site which necessitates the need to relocate operations to the alternate site. The network recovery procedures when approved by the user shall be constantly improved, updated and re-approved through the conduct of periodical exercises and validations;
• To assist the user in carrying out retrieval of logs;
• Support the user on site and monitor the network performances during major events;
• To assist the user to report any missing system end-user terminal (reported by end-user) to the user to terminate the service and to submit a report.

User Equipment (UE) Management

• To confirm failures or faults in the reported equipment;
• To ensure that all relevant data in the equipment are removed and perform software and content management if it is not done adequately;
• To save equipment configuration and settings especially for faulty equipment;
• To secure delete or remove configuration and data within the faulty equipment;
• To clone equipment configuration from one equipment to another;
• To update or restore firmware and software in the equipment physically;
• To perform remote wipe of confirmed faulty equipment;
• To consolidate repaired UE and provide updated software or apply patches before returning to user.

Application Management

• To provide Level 1 software support and basic application trouble shooting, consisting of:
• Version update
• Reinstallation
• Cache clearing
• User Frequent Asked Questions (FAQ)
• User registration check
• Hardware requirement check
• To provide Level 1 backend infrastructure support, consisting of:
• Server status check
• Connectivity check
• To escalate to application vendors for Level 2 support.

• Design and calculations of mechanical engineering works e.g. ACMV, Fire protection systems, plumbing and sanitary

• Conducting technical feasibility study, life cycle study and planning for building engineering.

• Preparation of study reports, design reports, technical notes and public consultation papers.

• Preparation of tender documents and technical specifications.

• Evaluation of tenders and preparation of tender assessment reports.

• Provide support in project management and contract administration for building engineering contracts.

IT Engineer

Job Scope:

• Set up cloud infrastructure for AWS or Azure
• Install and configure software and hardware for project testing.
• Liaise with customers to gather requirements.
• Produce design / test document in a project.
• Hardening windows and Linux system
• Manage network servers and technology tools
• Set up cluster server, VMware, and workstations
• Create and verify backups of data
• Monitor performance and maintain systems according to requirements
• Respond to security or usability concerns immediately
• Troubleshoot issues and outages
• Ensure security through access controls, backups and firewalls
• Upgrade systems with new releases and models
• Build an internal wiki with technical documentation, manuals and IT policies
• Upgrade systems and processes as required for enhanced functionality and security issue resolution
• Act as L2/L3 Support. Able to perform System recovery

Requirement:

• Experience as a IT Engineer, System Administrator, Network Administrator or similar role
• Experience with Windows Server, Group Policy, Virtualization, networks (LAN, WAN) and patch management
• Familiar with Terraform is a plus
• Knowledge of system security (e.g. intrusion detection systems) and data backup/recovery
• Resourcefulness and problem-solving aptitude
• Excellent communication skills
• Degree/Diploma in Information Technology, Computer Science or a related discipline; professional certification (e.g. Microsoft Certified Systems Administrator (MCSA)) is a plus

Who You'll Work With

We are experiencing tremendous growth and have an immediate need for a self-motivated Pre-Sales Network Systems Engineer to provide pre-sales technical support for our customers and prospects in Singapore.

The Systems Engineer is a critical component of the Arista Sales team. The main responsibility of the Systems Engineer is acting as a trusted advisor to our customers and prospects to identify opportunities, gather requirements and design creative solutions.

Responsibilities:

• You will partner with the Arista Account Managers to understand customer pain points and conduct white board network architectural reviews in addition to conducting Arista product presentations of Arista’s Open Networking Data Center and Cognitive Campus (including Wifi) networking solutions, CloudVision (Network Automation), Security (Network Detection), Endpoint Security and Real-time Fabric Monitoring solutions.
• You will architect, design and propose Arista Data Center & Campus network solutions using leaf-spine architectures (VXLAN, EVPN) and network overlays to capture additional sales.
• Perform hands-on tests to validate customer proof-of-concept setups, Data Center and/or Campus network designs, and network deployments using new products and features.
• Put together design guidelines and recommend improvements to customers for the networks they supported.
• Partner with Sales Team to respond to RFP/RFQs.
• Provide feedback to Product Management and Engineering.
• Represent Arista at SDN and Open Networking industry events and conferences.
• Keep up-to-date on competitive solutions, products, and services.
• Author white papers on technology and products.

We are looking for an intern for 2 months for our production arm, Prodigious. You'll be assigned to the account servicing team. You’re driven to learn and understand the job function of the client servicing team include performing fairly menial tasks which are part of client servicing scope. Ability to multi-task and follow through on projects with cross-reporting to key stakeholders.

Expectations of an Account Servicing Intern

• Responsible for administrative tasks including but not limiting to billing invoices, preparing cost estimates, quotation, writing minutes, deck beautifications etc. 
• Support supervisor in project management include updating project briefs and timeline
• Coordination work during pre and post shoot

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Engineer (Full Stack)

Internal Code: A24073

What will you do?

We are looking for software developers that are open and enthusiastic about end to end software delivery and trying out new technologies.

Be part of a cross-functional development team that values quality, automation and user experience of the software we deliver.

• Mainly responsible for software design and development of web frontend and backend applications
• Write automated functional and unit testing for the code you write
• Develop backend APIs & databases supporting the applications
• Design and develop applications leveraging cloud technologies
• Assist DevOps Engineer on build and release automation
• Work closely with fellow developers in pair programming and code review
• Work closely with Business Analyst, Quality Engineer, User Interface/User Experience Designers to deliver features

What are we looking for?

• Experience in modern web applications development using NextJS, TypeScript and Kotlin/Java
• Experience in development of CI/CD pipeline and applications deployment using cloud services such as AWS
• Experience in database migration will be an added advantage
• Working experience in an Agile/SCRUM setup will be an added advantage
• Excellent verbal communication and listening skills
• Proactive, self-driven and motivated
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is a plus

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Engineer

Internal Code: A24080

What will you do?

• Build prototypes to demonstrate technological opportunities
• Design system architectures
• Write production quality code
• Manage deployments to cloud infrastructure
• Because our team focuses on pushing new initiatives, you will also have to:

1. Identify potential projects that improve the public good
2. Design novel systems that work around bureaucratic constraints
3. Advocate and explain these technical ideas to other government agencies

Additionally, more senior engineers will be expected to:

1. Establish best practices for developer operations
2. Share your expertise and mentor other engineers
3. Help with recruiting

• You’re not just here to write code, but also to figure out what we should be building and how we should build it.
• Your job will be to bring expertise and capability to the public sector. Sometimes this means coding new systems from scratch. Other times this means using the best solutions the development community has to offer. We use cloud services, open source software, and commodity hardware as far as possible. These often include, but are not limited to: GitHub, AWS, React Native, MongoDB, and Stripe amongst others. Knowing what to build and what to reuse: let us avoid wasting time on solved problems and focus on delivering actual value.
• You will work on meaningful projects that solve problems pertinent to our society, from transportation, to education, to healthcare. The public sector is full of opportunities where even the simplest software can have a big impact on people’s lives. You will have direct ownership of your work with over 70% of our projects starting as ground up initiatives. Rather than work on commercial ventures commonly found in the startup scene, we’re here to improve how we live as a society through what we can offer as a government.
• We work mostly in Javascript with some Python on the backend. However, we don’t require experience in any specific programming language or technology. Core competency in at least one language and the ability to learn is what matters to us.

What are we looking for?

• At least 2 years experience of Javascript and Python
• Have a demonstrated ability to build software
• Prior work and personal projects count for much more than specific degrees
• Write code to solve abstract programming problems
• Clear thinking, the ability to debug, and understanding the limits of an approach matter much more than getting the “correct” answer
• Talk and reason about code with other engineers
• We work as a team so you need to be able to not just solve problems, but have other people understand your solutions
• Take initiative to make things happen
• Our job is to push for change in government, so we need to challenge the status quo and not wait for instruction
• Want to work for the public good - We are public servants, we serve the public.
• This sometimes means ignoring political pressures and misguided policies.
• We need people who will push back if something is not in the public interest
• Overall we look for people who have ability, initiative, good communication, and strong values.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Quality Engineer

Internal Code: A24095

What will you do?

• We aim to drive the adoption of modern software delivery at government agencies in order to better serve the needs and expectations of Singaporeans.
• As part of this endeavor, we are inviting interested applicants who are passionate about change and transformation to join us as Quality Engineer and to take on the exciting and challenging roles of accelerating software delivery while not compromising on quality.
• As a Quality Engineer, you have the opportunity to accelerate the delivery and to improve the quality of the software we build through recommending and implementing automated test suites.
• Work with the supporting vendors, government agencies, and the teams to identify end-to-end test scenarios as well as to automate these test scenarios, applying risk-based strategy to minimize manual interventions.
• Conduct research on emerging technologies that can optimize and accelerate the project delivery.
• Ensure all required testing documentation are in place as part of production preparation checks.
• Drive and advocate continuous improvement in testing practices and tools.

What are we looking for?

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines
• Minimum 3 years' experience in application exploratory testing and regression test automation
• Understanding of Web-based project test methodology, test environments, bug life cycle, and frequent code release deployment QA support
• Create, review and/or support test automation strategies and implementations
• Experience working with highly trafficked, scalable Web applications
• Troubleshooting/debugging skills
• Meticulous attention to details
• Good analytical, interpersonal and presentation skills
• Keen to share knowledge with team mates
• Curious, open to new ideas
• Quick to learn new skills
• Proactive, self-driven and motivated

Bonus points for:

• ISTQB, CSQA, CSTP or other relevant certification
• Experience with Katalon Recorder and/or Katalon Studio or equivalent
• Advanced knowledge of common desktop and mobile browser technology

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.