Responsibilities:

• Contribute to the design of engineering solutions and processes; design the feasibility testing approach and supervise its implementation to support the development and validation of engineering solutions
• Develop feasibility study report for projects
• Prepare conceptual design and basic process calculation and equipment rating
• Develop, configure and optimize processes, sizing & selection of equipment’s etc. for Tender from inception through to start up
• Introduce new product technology that will increase safety, reliability and cost effectiveness
• Facilitate in Hazop Study for all projects and modification
• Ensure process engineering and design execution follow Vopak Standards, Specification, Work Procedure
• Determine customer’s requirements and technical specifications
• Prepare enquiry, tender document, technical evaluation & clarifications, and recommendations
• Assist commercial and business development team in developing the business and financial model of new business opportunities
• Work with Engineering team on budgetary cost for projects and existing terminals revamp or expansion
• Prepare specifications and estimate costs for the proposed new, modifications, expansions projects
• Produce basic conceptual design of storage, pumping and loading/unloading operation
• Review of vendor’s documents, drawings, datasheets, specifications and calculations
• Prepare & Issue of RFQ’s, evaluation of vendor’s quotations, clarifications, technical bid analysis etc
• Prepare various engineering deliverables (Drawings & documents) such as process flow diagrams, P & I Diagrams, process datasheets, equipment specifications, cause & effect diagrams, control philosophies, shutdown philosophies, HAZOP studies & reports, operation & maintenance manuals etc. and providing necessary engineering inputs to other departments
• Work with respective parties on these reporting and documentation
• Provide process and operational training to terminal operator for new terminal operation
• Plan and participate in pre commissioning of new facility operations
• Involve in the PSSR and start-up of the new operations
• Effective interface between the customer and Vopak from an operational/technical point of view before and during the project
• Provide the necessary technical support for terminal O&M procurement, construction as required

Requirements:

• Degree in Chemical Engineering (Chemical Process).
• Preferable to have experience in Terminal Operations or Chemicals plants or Oil & Gas industry
• Minimum 8 years of relevant experience
• Project proficiency with Engineering and Operational background and experience in managing tank farm and similar projects
• Project management skills
• Knowledge of technical functional areas for better coordination and timely decision making

• Ensure correctness of build-up according to construction plans and drawing.

• To coordinate with engineering team to prepare engineering drawings and sketches.

• Design drawings including layouts, elevations and details.

• To provide drawing modifications and advice on altering design changes to suit site condition under the guidance of Engineers.

• Participate in management and implementation of design and various technical data, responsible for compilation of construction operation instructions and technology summary and report to Managers.

• Prepare detailed monthly and weekly progress plans to project team according to monthly/annually progress targets as assigned.

• Communicate with government personnel/owner/developer to coordinate existing site issue as necessary.

• Ensures timely, safe, and cost-effective design and implementation throughout the project lifecycle from conception to client satisfaction.

• Maintain, drive, supervise and implement robust technical standards, systems and processes

• Influence technology strategies and decisions with a high-level of expertise and knowledge

• Provide direction and support to ensure compliance with relevant legislative specifications and standards

• Lead a team of workes developing, and address training needs when necessary

• Coordinate the regular testing of to address faults, and provide evaluations in order to improve

• Act as a key contact with customers who have technical issues

• Write and prepare several construction technical plan as for backup

• Compile schedule plan and personnel mechanical allocation table as report for managers

• Management of all site engineers on using machine at work for coordination matters

• Supervising work for the safety and the efficiency of production on technical progress at site

• Advice and propose based on - Mixing plant construction, Windproof and sandproof construction, Construction of steel cofferdam in water, Underwater mass concrete cracking prevention construction, Underwater rock-socketed pile construction

Job Requirements:

• Degree in Construction Field Engineering.

• Ability to clearly particulate expectations

• Working knowledge of STAR*NET software.

• Proficient in AutoCAD, Revit & Civil 3D BIM application.

• Able to supervise and lead the survey team for handling all survey related issues.

• Able to provide design and shop drawings.

• Able to provide advices on altering design changes to suit site condition.

• Comprehensive problem-solving abilities.

• Knowledge on Underwater Construction Site exp: Cofferdam Construction, Underwater Concrete Construction.

Job Description :

• Read and interpret Structural, Piping, HVAC, mechanical electrical drawings.
• Manage a team of Superintendents, Supervisors, including work schedules, project progress and resource allocation.
• Manage & chair day to day VSCC (Vessel Safety Coordination Committee Meetings).
• Assist in providing cost estimates for labour, supplies, materials and other project costs.
• Collaborate with clients, Project Managers, other construction management to determine budget and timeline.
• Coordinate materials and equipment delivery with vendors and suppliers.
• Create schedules for workers and subcontractors.
• Work closely with commercial team and forecast Subcontractor’s requirements and assign scopes accordingly.
• Maintain a daily log for the job site’s operations, reporting to management as necessary.
• Make changes in the operation as necessary to best met construction deadlines.
• Implement management techniques that are cost-effective and efficient.
• Prepare day to day reports & update project master schedule.
• Conduct weekly internal production meetings & Weekly client – shipyard interphase meeting.
• Prepare meeting minutes and disseminate every week to all personals related to the assigned project.
• Maintain project variation order records, technical query records, Drawing transmittal records and disseminate weekly.

Job Specification :

• Bachelor’s / diploma in Mechanical or equivalent
• Minimum 5 years of working experience in Rig Construction & Shipyard experience
• Must possess MWSHSSR (Manage Workplace Safety and Health Ship building and Ship Repair)
• Must possess experience of working & managing Jack up rig upgradation / repair assignments in shipyard environment
• Excellent English command, including writing, speaking and active listening
• Proficient in MS Office applications (ie. Microsoft Excel)
• Knowledge of construction budgeting best practices and assist commercial team in preparing quotes.
• Good planning skills, including execution, resource allocation and manage contingencies
• Understanding of construction equipment, including safe operating practices and signs of maintenance issues
• In-depth understanding of MOM construction regulations
• Great problem-solving and decision-making skills
• Effective leadership abilities, motivate peers, set targets / goals and conflict management
• Organizational skills, including time management, delegation, prioritization and multitasking
• Willing to work in a challenging repair environment

Job Description & Requirements

-Performs any other duties as directed by the Manager.

-Perform other administrative duties as assigned

-Organizing workflow and ensuring that employees understand duties or delegated tasks.

-Maintain consistent high quality of work performance.

-Complete operations by developing schedules, assigning, and work gathering resources.

Requirements

- Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma/Degree in any field.

- Preferably with at least 3years and above of a working experience

- 6 days work week

- Able to work in a fast-paced environment & work independently

- Working location: Pioneer

In this role, you will have the unique opportunity to engage in Mechanical Design, using Solidworks and AutoCad.

We're looking for motivated engineers willing to work in a quality driven environment with a keen sense of product development to produce technologically superior products. One thing is for sure, you will be working closely with an experienced team, that will always make you feel that you a part of a dynamic organization.

Responsibilities

• Mechanical Design

• New project development, involving in conceptual design proposal, design and compilation of project budget.

• Responsible for meeting product quality standards and delivery target.

Requirements

• Degree/Diploma in Mechanical/Mechatronics/Precision Engineering

• Interest in Industrial Automation field

• Knowledge of Solidworks/Pro E or other 3D CAD software

• Preferably at least 2 years of relevant experience in Industrial Automation projects

Job Description & Requirements

• Preparing and developing technical presentations to explain our company's products or services to customers.
• Discussing our products specifications with customers.
• Collaborating with project department to understand customer requirements and provide sales support.
• Prepare costing and quotations for management’s approval and submit to customers. Follow up with customers to secure orders.
• Coordinate projects until successful delivery
• Preparation of hardware schedule for submission and approval.
• Prepare, submit and follow up on all the progress claims for payments to the customers.
• Prepare and negotiate final accounts with customers.

• Requirements :
• Diploma or Bachelor's degree in engineering related field.
• Experience in the sales of building and architectural products or materials in construction industry.
• Strong communication, interpersonal, customer service, and sales skills.
• The ability to relate technical information to non-technical customers.
• Excellent technical and problem-solving skills.
• Good leadership and team working skills.

Overview:

To lead a team of personnel (Yard and contractors) on the efficient operation of activities carried out onboard vessel (offshore newbuilding, repair, conversion and modification) or workshop and ensure that works are completed within stipulated schedules with skill, efficiency, quality and innovative solutions. Operation activities include practical design, practice procurement, project management, construction, installation, testing and commissioning. Lead the Safe Distance Officer for Covid-19 or similar where applicable.

Responsibilities:

• Administers, monitors and continuously ensures that all operations conform to safety requirements and maintains high safety standards.
• Based on defect list given by ship owner, plans, prioritises and executes repair activity based on available resources and facilities. Provide information to APM for any CM39 requisition
• Co-ordinates and disseminates all the repair activities in the repair process in a given schedule with supervisors, yardmen and contractors in accordance to the Department Work Instruction and specifications.
• Attends vessel safety co-ordination meetings to ensure that all repair activities are carried out in a safe environment and meets the applicable statutory, regulatory and contractual requirements.
• Attends department production meeting to co-ordinate work progress, update work schedules promptly and scope of work. Highlight critical path and also channel to Ship Repair manager to achieve project milestones and prevent cost overruns.
• Liases with Shiprepair Manager/ Billing Dept about variation and additional in work scope. Raise variation order for additional work not stated in the specs
• Liaises and coordination with relevant trades towards milestone set
• Liaises with Superintendent for critical activities for smooth operation and provide technical proposal.
• Ensure cost control by correct Just In Time material ordering, proper manpower deployment and reporting, rework prevention, continual improvement on work method in order to meet the EVA, KPI and Key Thrust set by the department
• Feedback to HOD and superior on any non-conformance and record in Incident reporting and follow up on corrective actions
• Ensure all completed works carried out are documented and verified by Client
• Contractors work completion report verified as per actual carried out
• Ensure proper usage of department assets and report any non-conformance
• Whenever required communicate through by means of IT networking and solutions
• Ensure the safety of personnel through compliance with Occupational Safety and Health and Environmental Regulations and HSE operating procedures and conduct Risk assessments before commence of work. Counsel employees about compliance as necessary.
• Participate in the preparation of Safe work, Environmental control and Emergency procedures and Audit Matters e.g. ISO9001:2015, ISO45001:2018 and ISO14001:2015.
• Ensure that all Health, Safety, Environmental & Quality (HSEQ) plans are followed. Perform Safe Management/ Distancing Officer duties stipulated when assigned
• Any other associated tasks and responsibilities assigned from time to time.

Preferred Requirements:

• Preferably with 2 years’ working experience in a similar capacity.
• Effective planning skills, good supervisory ability, conflict management skills and interpersonal skills.
• Effective problem solving and decision making skills are also essential.
• Ability to communicate in other languages (like Mandarin, Tamil, and Malay) would be an added advantage.
• Basic knowledge on Piping Standard and Compliance with all Codes, Policies, Procedures e.g. ASME Code for Pressure Piping B31.3, ASME IX, IACS
• Resourceful, dynamic, excellent leadership qualities, tactful, committed, good team player, customer oriented and able to work under stressful situations.

Preferred Qualifications:

• Minimum primary education with relevant working experience or diploma in Marine Engineering or Mechanical Engineering or NTC 3 certification or equivalent or completed apprenticeship in Marine Piping and Plumbing.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Build a career with confidence.

Carrier Global Corporation, global leader in intelligent climate and energy solutions is committed to creating solutions that matter for people and our planet for generations to come. From the beginning, we've led in inventing new technologies and entirely new industries. Today, we continue to lead because we have a world-class, diverse workforce that puts the customer at the center of everything we do.

About the role

• Develops and fosters good personal customer relationships with prospective accounts to influence opportunities.
• Aids in and supports business development activities for prospects within defined customers segment to support the business strategy.
• Strong interest to pick up the HVAC knowledge and provide technical clarification to client.
• Willing to have a personal significant growth within the industry through networking with key stakeholders from Building owners, Main Contractors and M&E Contractors.
• Willing to be a team player in a MNC collaborating within the organization.

Role Responsibilities:

• Responsible for the promotion of company's values and solution to all levels from customers.
• Establishes prospects and develops a professional relationship to understand the customer needs and suggest products and/or services that meet the customer needs.
• Prospects bid opportunities, participates in the preparation of bid responses and the negotiation with potential customers to achieve company's goals and targets assigned.
• Create and pursue leads proactively and convert them into orders in timebound manner.
• Provide monthly report on sales progression to management.
• Responsible for payment collections.
• Develops proactively with existing and new customer contact leads for new opportunities.
• Attends trade shows at times to increase the visibility of the organization and potentially influence prospects.
• Minimum traveling with customers for solution performance testing.

Minimum Requirements:

• Bachelor Degree or above, preferably in Mechanical, Electrical or HVAC Engineering.
• Minimum 2 to 5 working experience as sales/marketing position in direct selling.
• Strong interpersonal, presentation and convincing skill.
• Self motivated, diligent, positive mindset in multi-tasking activities.
• Basic knowledge in Excel, Words and Powerpoint.

Benefits

We are committed to offering competitive benefits programs for all of our employees, and enhancing our programs when necessary.

Our commitment to you

Our greatest assets are the expertise, creativity and passion of our employees. We strive to provide a great place to work that attracts, develops and retains the best talent, promotes employee engagement, fosters teamwork and ultimately drives innovation for the benefit of our customers. We strive to create an environment where you feel that you belong, with diversity and inclusion as the engine to growth and innovation. We develop and deploy best-in-class programs and practices, providing enriching career opportunities, listening to employee feedback and always challenging ourselves to do better. This is The Carrier Way.

Join us and make a difference.

Apply Now!

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent.
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 3 years Site Experience
• Prefer candidates with LTA Project Experience.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Roles & Responsibilities

• Perform installation/maintaining/Repair of machinery and equipment
• Carrying out routine inspection and servicing of machinery and equipment
• Assists in the company's maintenance schedule
• Update maintenance report & calibration report
• Maintain Spare parts and upkeep of Maintenance Room
• Participate in productivity project and work health safety
• Perform ad-hoc duties as assigned

Requirements

• Diploma in Mechatronics Electrical/Mechanical/Engineering / ITE Engineering
• Minimum 2 year of machine maintenance works
• Able to work independently with initiative
• Converse in both English and Chinese language
• Self motivate and able to involve in-coming event
• Willing to work in Tuas South area.

Benefits

• Company transport will be provided at mrt.
• Transport allowance will be given.
• Additional company holidays shutdown per year will be given.
• Other staff welfare benefits.

Job Description:

• Monitor and troubleshoot incineration plant operation and process control equipment for smooth operation
• Develop operation procedures and methods for optimum operation (i.e. lower operation cost, minimum manpower utilization, maximize machine capacity)
• Develop and practice Preventive Maintenance Schedules and regular maintenance schedules
• Prepare and monitor operation data sheets and records
• Regular patrolling and inspection of machine and equipment conditions and staff's duties
• Monitor and brief staff's safety regulations at work
• Monitor and supervise good house keeping practice at incineration plant
• To plan proper schedules of steam distribution as well as arrange advance notice to other department if there is any interruption in stream supply
• Strictly follow ESH procedures, issue all necessary PTW and monitor contractor works
• To compile and review monthly operation reports (e.g. cost, productivity, quality, non-conformances, etc.)
• Comply with legal requirement such as NEA continuous air emission monitoring unit, PUB sewage water discharge limit, MOM boilers inspection, air compressors and etc.

Others:
• To undertake any other duties that may be assigned by the Management from time to time
• To assist and support the Operation Maintenance of Incineration plant for Technical support (advice, material selection, purchasing order, maintenance history records, and preventive maintenance plan)
• To train and guide the Incineration staff for operation and maintenance for continuous improvement

Requirements:
• Candidate must possess at least a Diploma/Bachelor's Degree in Chemical Engineering or equivalent.
• Min. 5 years experience in operating incinerator, waste heat boiler, cooling tower and demin water plant
• Steam Engineer Grade 1 or 2, preferably Grade 1
• Prefer to have Managing WAH, confined space and other related certificates
• Able to work 12-hour shift work

Email: [email protected]

We are looking for a Solar Project Engineer who is passionate about deploying solar energy in Singapore. The successful candidate will be in charge of executing solar projects on roof tops all across Singapore and the region.

Job Requirement

• Design, build and install solar energy systems
• Onsite planning and managing of installation teams
• Contact point between the company and client during construction stage
• Create and execute project work plans and revise as appropriate to meet changing needs and requirements.
• Hands on implementation on site
• Design the full construction from pre to post-construction and handover of the system to the client
• Complete assigned projects on schedule and within budget
• Identify any potential safety risks within projects and putting in place strategies to mitigate any risks
• Ensure all required Environmental, Health and Safety requirements are met.
• Prepares for engagement reviews and quality assurance procedures.
• Ensure smooth delivery of the project completion/SystemTurn On

Skills and Competencies

• Excellent communicator who is able to work independently
• Diploma/Degree in Electrical Engineering or related fields
• 3-5 Years of experience in project management
• Candidate with experience in solar project execution will be in advantage
• Knowledge in energy modelling software (PVsyst), Autocad and construction modelling software
• A team player who is results and customer oriented, independent, creative and passionate about renewables
• Singaporeans/PRs only

** ONLY Singaporeans/ PRs may apply ** No Agents Please**

Responsibilities:

· Perform QC inspection at various stages of production and identify non-conformance quality issues.

· Perform QC inspections on incoming, WIP and outgoing parts in accordance with work instructions

· Liaise with relevant stakeholders for any material quality-related issues and closely follow-up effectiveness and closure of corrective actions.

· Collaborate with the Engineering team to define and implement quality control requirements.

· Prepare QC report and status update to relevant stakeholders.

· Maintain all QC document master list including including Mill Certificate / test report for all materials used in project.

· Maintain calibration status of Company’s equipment.

· Familiar with welding process such as SMAW, GTAW, SAW

· Any other ad-hoc duties as assigned.

Requirements: ·

· Minimum Diploma in Quality Engineering / Mechanical Engineering or equivalent

· Possess strong analytical skillsand meticulous individual

· Proficient in Microsoft Office

· Able to work both independently and as a team.

· Knowledge of ISO 9001, 14001, 13485 & 45001, FDA will be an advantage

· Preferable if able to commence work immediately

Responsibilities:

• Develops and update piping specifications according to P&lD, contract scope of work (i.e. GTD, SOW) and class/rules requirement (ABS, DNV), etc.
• Builds Caesar II model for pipe stress analysis and Prepares pipe stress philosophy, pipe stress critical line list
• Analyze calculation output and guide piping deigners
• Runs pipe stress analysis and conduct checks (stress, deflection, equipment nozzle, flange, fatigue, blast case if applicable)
• Optimize support load if the load is found too high and provide solutions if stress results fail
• Generates load restraint summary for pipe support modellers and stress Isometric and/or stress mark up
• Prepares report for clients and resolve owner comments
• Issues pipe stress analysis report and perform trunnion calculation
• Updates Caesar.II model base on modeller feedback/site feedback and conduct all relevant stress checks
• Verifies types of primary pipe support based on pipe stress analysis results (rest, guide, hold-down and line stopper)
• Performs visual check and calculate pipe support load for non-critical line
• Performs Compressor equipment check, Expansion joint check and Spring hanger in stress analysis.
• Carries out inspection at site and onboard vessel to do as built

Requirements:

• Minimum Bachelor Degree in Engineering
• At least 5 year of piping engineering related working experience or similar activities as described above
• Proficient in Microsoft Office products, AutoCAD and Caesar ll Stress Analysis Software
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building, FPSO projects (both topsides & marine)
• Understand class/rules requirement such as ABS, DNV, etc
• Understand P&IDs and other related piping items (i.e. equipment specifications, etc)
• Able to conduct stress checks and piping related checks
• Able to communicate & write in English
• Able to work overtime when required

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 1 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Job Overview:

The Piping Material Engineer will be responsible for providing technical expertise in the selection, specification, and procurement of piping materials for FPSO (Floating Production Storage and Offloading) projects in the oil and gas industry. The role includes ensuring compliance with relevant standards, codes, and project requirements, as well as supporting the design, procurement, and installation phases of piping systems.

Key Responsibilities:

• Material Selection:Identify and select appropriate piping materials based on project specifications, industry standards, and client requirements for FPSO systems.
  Ensure compatibility of materials with process fluids, temperatures, and pressures encountered in oil and gas environments.
  
• Technical Specifications:Develop and maintain piping material specifications, including MTOs (Material Take-Offs), datasheets, and valve specifications.
  Ensure all materials comply with relevant industry codes such as ASME, API, ASTM, and company standards.
  
• Vendor Management & Procurement:Assist procurement teams by evaluating and approving material suppliers and vendors.
  Review technical documentation from suppliers, including manufacturing processes and certifications, to ensure materials meet project standards.
  
• Design & Engineering Support:Collaborate with piping designers and stress engineers to ensure materials are fit for purpose and can withstand operational stresses.
  Provide input during detailed engineering to ensure proper material handling, storage, and installation methods.
  
• QA/QC & Inspection:Assist in the inspection and quality control of piping materials, ensuring that they meet the required specifications.
  Ensure non-conformance issues are addressed and resolved in a timely manner.
  
• Health, Safety, and Environment (HSE) Compliance:Ensure all selected materials contribute to the safety and integrity of the FPSO.
  Comply with health, safety, and environmental regulations during material selection and application.
  
• Documentation & Reporting:Prepare and maintain technical reports, material lists, and project documentation.
  Provide regular updates to the Lead Piping Engineer and project management on material status and procurement timelines.
  

Qualifications and Skills:

• Education:Bachelor’s degree in Mechanical Engineering, Materials Engineering, or a related field.
  
• Experience:Minimum 5-7 years of experience as a Piping Material Engineer in the oil and gas industry, with at least 3 years in FPSO projects.
  
• Technical Skills:Extensive knowledge of piping material standards (ASME, ASTM, API, etc.) and industry codes.
  Proficiency in material selection, corrosion prevention, and understanding of fluid properties in offshore environments.
  Familiarity with procurement processes, material requisitions, and supplier/vendor evaluations.
  
• Soft Skills:Strong analytical and problem-solving skills.
  Excellent communication and teamwork abilities.
  Attention to detail and commitment to high-quality standards.
  

Certifications:

• Certifications related to piping engineering and materials, such as NACE, API, or ASME certifications, are preferred.

Work Environment:

• Willingness to work in both office and offshore environments as needed.
• Ability to travel to vendor and project sites when required.

Job Responsibilities:

• Oversee C&S design progress against schedule and budget on projects.
• Manage the interfacing with M&E contractors
• Coordinate with engineering consultant, review and comment its design drawings
• Monitor the design progress and statutory submission against project baseline program
• Implement corrective measures for identified distractions or issues.
• Review, negotiate and recommend for approval/disapproval on design change orders.
• Administer design subcontract including processing monthly invoices for payment.
• Coordinate and monitor status of design incentive/disincentive programs complying with provisions of design subcontract.
• Perform constructive reviews conforming design to prime contract requirements and proposal commitments.
• Coordinate and control design submittals for owner’s review and approval.
• Lead a design team for overall C&S and architectural design works, assist QS team for material takeoff and tendering, manage subcontractors and support site construction works
• Facilitate resolving design issues with owner.

Job Requirements:

• Degree qualifications in Civil and Structural Engineering
• Preferably 2 years of relevant expereince in the planning and design of major waste to energy projects or similar major projects
• Positive working attitude and ability to work in a fast-paced environment
• Well versed with C&S software

Responsibilities:

• Preparation of process scheme/process flow diagram/FEED and process description
• Familiar with material and heat balance calculations and thermal rating of heat exchangers
• Development of process data sheets and able to perform NPSH/hydraulic calculation and equipment and line sizing
• Participate in Hazop Study and develop the P&ID
• Prepare material selection diagram and establish requirements for any chemicals, solvents and catalyst
• Perform relief valve sizing, control valve sizing and popping philosophy
• Prepare the equipment and line list and review the various equipment and instrument data sheets
• Interface/coordinate with other discipline for design development

Requirements:

• Degree in Chemical Engineering
• Minimum 15 years of design experience for process system in the oil and gas, chemicals storage and process environment
• Familiar with respective code of practices for process design and fire protection such as API, NFPA, SS532, SS634 etc.
• Able to lead the process team

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Investigate and analyse incidents pertaining to rotating equipment failure or malfunction in order to identify root causes of problems and recommend & implement solutions.
• Identify, analyse and troubleshoot machinery deficiencies and make recommendation for improvement.
• Monitor and review implementation of Preventive Maintenance program to achieve high plant availability.
• Monitor Condition Monitoring program, analyse and propose recommendations for predictive maintenance.
• Establish programs and initiatives to maximize plant availability and equipment reliability

• Degree in Mechanical Engineering
• At least 4 years' experience in maintenance of plant equipment especially rotating machinery, preferably in oil/petrochemical or related industries

Job Description:

• Assist electrical engineer for testing and commissioning on High and Low Tension equipment
• Operation of various electrical equipment and systems.
• Servicing and maintenance on High and Low Tension equipment.
• Senses of agility, observation and alertness.
• Have positive attitude towards electrical learning.
• Willingness to learn from experiences and apply those learnings to new situations.

Requirements:

• Diploma/Degree in Electrical Engineering or related
• Fresh graduates are welcome

Job Duties & Responsibilities:-

- Overseeing the procurement of materials.

- Coordinating with the various clients , consultants, main-contractors , architects, sub contractors and specialist to ensure the smooth and timely execution of the project deliverables.

- Ensuring that all works are carried out in accordance with the project specifications.

- Ensuring that all works are carried out within the project budget given.

- Overseeing the various design elements of the project.

- Providing timely submissions for cash flow and progress claims.

- Procurement of materials and ensuring the timely delivery of the materials as per site requirement.

- Ensuring that all team members can deliver their daily works and that the team meets the project requirements.

- Monitoring and improving of overall project progress to meet critical milestone dates.

- Submission of monthly / weekly progress and safety reports.

- Reporting of all project matters to the management.

- Preparing and presenting of consolidated contractual claims to the client representives.

- Any other works/tasks given by the Management for the completion of the project and other Ad-hoc assignments.

Work location : at site

Mon-Fri : 08:30am - 5.30pm, Sat : 8.30am - 12.30pm (Alternate Sat)

Salary shall be commensurate with experience .

Candidates are requested to indicate the level of remuneration desired.

The Job

• Subject matter expert for Linux, Solaris, Oracle Linux and Oracle Web Logic
• Provide level 2 & 3 technical support to ensure due fulfilment of service level
• Ensures the highest level of systems and infrastructure availability.
• Work with application team for porting, patching, system UAT and staging
• Ensure systems and data security by conducting regular security assessments and audits, monitoring systems traffic and system logs for security breaches, and implementing security protocols and measures to safeguard data and systems integrity.
• Identify opportunities to improve and update software and systems through evaluating existing systems for efficiency and effectiveness, identifying areas for improvement based on technological advancements and organizational needs, and implementing upgrades and enhancements.
• Proactive exploration of the system security and establish compliance with policies/procedures through continuous reviews and audits
• Project implementation, new system design and vendor management
• Backup as a System Admin for Windows systems

Job Requirement

• Diploma or Degree qualification in Computer/Electronic/Electrical Engineering of relevant experience
• Strong technical background with minimum 4 years of hands-on experience in administering and security hardening of Linix and Solaris etc.
• Strong experience in the administration of Weblogic Application Server and software rollout.
• Strong experience in the administration of RedHat and Oracle suite of products.
• Possess good working knowledge of TCP/IP networking.
• Willing to work out-field and provide after office-hours remote standby support.
• Ability to work independently and provide outstanding customer support in a fast-paced environment.

Job Descriptions

• To do up products specifications for main contractors, architects, Consultants
• Establish Communicative Business Relationship With Prospective Clients at long term.
• Be the account manager for the projects

Job Requirements

• Candidate must possess at least a Diploma & Above, preferably construction related.
• Self Confidence, strong analytical mind, able to communicate with various professionals and different site personnel, friendly, team player & target oriented.
• Possess own car
• Required skill(s): MS Excel, MS Powerpoint, MS Word.
• At least 2 year(s) of working experience in the related field is required for this position.
• At least Project based type Sales Experience
• Handling Specifications

Benefits

• $600 transport allowance
• Can claim home season parking, parking fees and ERP charges pertaining to work can be claimed on reimbursement basis.
• Petrol Fleet card given
• Company mobile line, phone and laptop will be provided
• Annual leave starts from 10 days
• Entitled to quarterly profit sharing, have quarter sales target which set by HQ and once they exceed the sales target, they will have the profit sharing on the excess amount. Personal target will be set by HOD, once hit then is eligible for the profit-sharing pool. Team work is important.

Working Hours

• Mon - Fri, 5 days work week
• 8.30 - 18.00

• MNC, Tuas, Transport (2 ways)
• Heavy travelling, Good exposure and opportunities
• Basic $3800 - $5000,overtime claim
• Overseas allowances, mobile allowance
• Performance bonus
• No experience can apply, On-the-job training

Role & responsibilities:

• Support the Senior/ Service & Commissioning Engineer on site.
• Provide technical expertise and carryout service order assignments from the Service & Commissioning Manager/ Service & Commissioning Coordinator
• Field representative of the company to evaluate, troubleshoot, analyze, repair, test, and return equipment to service as required or instructed by a service order in a safe and effective manner.
• Create daily reports about the performed service tasks and all related issues and send them to the Service Mailbox
• Complete all the required documentation & write reports regarding the work

Requirements:

• Minimum a Degree in Electrical, Electronic, Computer Science or equivalent
• Good, basic, technical insight into electrical, hydraulic and basic mechanical engineering fundamentals
• 1yr of relevant experience in Marine/Oil & Gas industry
• No experience can apply as on-the-job training is provided
• Good communication skills
• Analytical and systematic approach to problem solving
• Basic understanding of programming and industrial control systems is a plus
• Willing to travel abroad heavily
• Willing to work overtime
• Having a great desire to gain more knowledge and skills
• Positive, solution driven, hands on attitude.
• Can work well in a team but having a great level of self-management and independence

Interested applicants, please send your profile to [email protected]