As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to perform modelling and real-time simulation of electric vessel’s onboard microgrid and propulsion system.

Key Responsibilities

• Participate in and manage the research project with Principal Investigator (PI), Co-PI and the research team members to develop onboard microgrid simulation models with energy management systems as well as to plan and test the relevant hardware systems.
• Work with research team to deliver the work scope and undertake these responsibilities in the project.
  Work Responsibilities:
  1. Develop detailed electrical models of the microgrid (power system) of various e-vessels based on the concept design in a simulation environment such as Matlab/Simulink.
  2. Design and develop an intelligent energy management system for the e-vessel microgrid for coordinated control of multiple energy sources considering cost, carbon, and operation constraints.
  3. Operate the simulated electrical model with EMS controller to perform simulations for various cases to demonstrate performance and recommend improvements at unit, sub-system and whole system level.
  4. Implement and carry out simulation studies for onboard microgrid and connection to shore charging infrastructure.
• Recommend efficient and reliable power system architecture(s) with other merits of high-density and light-weight.
• Test the relevant power electronics and drives system hardware and troubleshoot the challenging problems.
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment and assist in laboratory management.
• Mentor students involved in the research project
• For those hired at senior levels, management responsibilities may be included

Job Requirements

• Have a Master’s or PhD’s degree in Electrical Engineering or equivalent from a recognized University. Major in Power Engineering will be advantageous.
• Minimum 3 years of relevant experience in modelling and energy management algorithm development using MATLAB/Simulink for microgrid applications.
• Knowledge of power electronics, drives, and control is highly preferred. Hardware testing experience will be advantageous.
• Have experience and commitment to participate in project meetings.
• Self-motivated team player and good project management skills.
• Excellent writing, communication, presentation, and interpersonal skills.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

• Mentorship, guidance, and training will 100% be provided
• Great for fresh grads who want to start out in the engineering field

• Responsibilities:
• Design, prepare shop drawing, methods statements, quality installation, inspection, testing and commissioning, documentation works for BMS system.
• Site coordination, project schedule planning, coordinate site works
• Design and deploy BMS controlling and building automation system.
• Project Management and attend project meeting.
• Provide training to customers.
• Provide testing and commissioning services

Requirements:

• Min Diploma / Degree in Engineering (Mechanical / Electrical Engineering / Construction / Building related)
• Able to define BMS project work scope, requirements and specifications, and identify, allocate resources for executing the project from start to completion.

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to Ashwin Vivek Vinod (EA Personnel Reg. No.: R22111690) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, Ashwin Vivek Vinod, at 6590 9957 or 9178 0355 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

IT Support Engineer

• Salary Range: $4,000 - $4,500
• Working Days: 5 Days Mon-Fri 8.30AM-6.00PM
• Location: Siglap

Job Summary

• Provide 1st and 2nd Level IT Support to end-users
• Manage IT assets through procurement, tracking, maintenance, refresh/renewal and disposal/ termination.
• Provide assistance in the implementation of new end-user computing technologies

Responsibilities:

• Provide 1st and 2nd Level IT Support to end-users
• Provide end-user IT support for both local and remote locations daily to ensure smooth business operation including end-user computing device performance monitoring
• Perform installation, configuration and maintenance of computers, workstations, applications and other related equipment and devices
• Perform IT asset lifecycle management including tech refresh, preventive maintenance (Eg. Laptops / Printers) and software license monitoring
• Responsible for the procurement of IT equipment, software and related products including administering procurement processes and supporting in requirements scoping and evaluation
• Manage IT vendors (service quality, feedback, improvements) and service contracts
• Provide assistance in the implementation of new end-user computing technologies
• Any other IT duties as assigned

Requirements:

• Recognized Diploma or Degree in Information Technology or equivalent
• Minimum 3 years of experience in providing IT support to end- user community
• Experienced in troubleshooting IT issues at L1/L2 support levels and escalating to higher levels of IT support

☎️ Whatsapp +6588278652 (Hym)

Goh Hym Yien Reg No: R24121939

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

About HOYA Surgical Optics (HSO)

HOYA Surgical Optics (HSO) is the globally leading Preloaded Intraocular Lens (IOL) focused company that provides technologies and solutions that exceed expectations, enabling ophthalmic surgeons to focus on restoring sight. We are dedicated to improving the vision and quality of life for millions of people suffering from cataract, and helping them celebrate life visually.

HSO empowers cataract surgeons all over the world with innovative ophthalmic devices and services, with an attention to detail that helps them achieve better surgical outcomes and better practice results. Our commitment to delivering these results is grounded upon a quality management system that is continuously improving to meet changing global regulatory requirements and our entrepreneurial drive to be the brand of first choice.

At HSO, People is the key factor to our success. We aim to create a conducive work environment for our employees around the globe, and to promote an inclusive culture based on our core values – Excellence, Passion, Innovative, Collaboration, and Accountability.

HSO way of working

In fulfilling our roles, we are

• Accountable for our own capabilities and development,
• Focused on delivering results without excuses, and
• Alive to the sensitivities, risk, and impact we have on others and work in a way that helps others do their work effectively.
• We are looking for people who
• See beyond themselves and are impact-focused,
• Consider the needs, challenges, and objectives of every person with whom they interact, and
• Exhibit positive reinforcement to help others succeed.

About the role

Works closely with and have impact on: Global Research & Development (R&D), Post Market Surveillance, and Global Regulatory Affairs (RA) Teams

Reports to: Senior Manager QA R&D

Function: Global QA & Compliance Organization

Work Location/Site: Singapore / Global Headquarters

Role Overview

This position is responsible to ensure that products meet quality goals and regulatory requirements, including but not limited to FDA Regulations, ISO 13485, EU MDR requirements, and Risk Management per ISO 14971 and maintain compliance of the Quality Management System (QMS).

Duties and Responsibilities

• Partner with R&D teams in the USA, Japan, and Singapore to ensure that design control is completed in accordance with procedures, WI, regulatory requirements, and assure that required outputs have been completed
• Execute risk management for devices, processes, and provide the assessment results from product development through to the launch
• Maintain and update risk management files with Global R&D/Manufacturing Engineering (ME) teams to support product development (Risk Management Plans, Risk Control Log, Benefit Risk Assessment Risk Management Report, xFMEA, etc.), and act as the Risk Management expert
• Assist in the review and approval of design development plans, verification and validation protocols, reports, master V&V plans and reports, and design transfer
• Review and approve design verification test protocols, reports and data from a logical point of view (Compliance, rationale, objectiveness and statistics)
• Partner within Quality and R&D to ensure design control documentation (Risk Management, Traceability/Linkages) & design change control requirements are met
• Review and approve biocompatibility protocols and reports
• Ensure compliance of IQ, OQ, tests method validation, Standard Operating procedures and work instructions regarding product development
• Maintain compliance to QMS procedures of the R&D Singapore site, and support the Singapore R&D Site - QA
• Support External audits by competent authorities and notified bodies
• Support internal audits at the local site, and other sites as required
• Review and approve other quality documents (e.g., IQ, OQ, PQ, WI, etc) within areas of responsibility
• Propose and execute quality/process improvements. Write/review policies/ processes/ procedures and related documents
• Manage and monitor the progress of the calibration and maintenance of testing equipment. Ensure calibration or maintenance records satisfy regulatory and QMS requirements (act as Equipment Control Administrator in Singapore)
• Participate in development projects and change control request meetings to support the resolution of engineering issues
• Collaborate with the post-market surveillance team and complaints investigation teams to maintain risk management process throughout a product’s lifecycle
• Provide support for other quality activities and improvement initiatives, quality data collection and trending, CAPAs, change controls, training, etc.
• Support initiatives as identified by management to support QMS and other regulatory requirements in Singapore

Requirements

Experience

• At least 4+ years of Industry experience working as QE Engineer in Medical Device/ Pharmaceutical product or optical engineering business field
• Experience in test method validation
• Experience in Design control, Design Transfer, Design and Development Process
• Demonstrated knowledge of Risk Management (ISO14971), Design control, Design and Development Process and Quality System (any one of ISO13485).
• Understanding and Knowledge of biocompatibility studies
• Experience in coordination and planning of complex activities and ability to identify and resolve complex problems through effective use of technical and interpersonal skills
• Product development experience (e.g. approaches for definition of requirements and specification setting for verification and validation). Practical experience in design control and risk management
• Effective use of oral and written communication skills to clearly communicate the quality position, and the actions necessary to resolve issues
• Interpersonal, team, leadership, and negotiation skills to handle conflicting priorities
• Strong oral and written communication skills, excellent interpersonal and cross-cultural skills required
• Capable of clearly presenting and justifying quality requirements to management
• Accreditation by a professional body is highly desirable. Examples include American Society for Quality (ASQ) Certified Quality Auditor (CQA) or Certified Quality Engineer (CQE)

Skills/Accreditations

• Smooth communication ability
• Business software skills (e.g. Word, Excel and Power point)
• Experience with statistical software such as Minitab
• Voluntary working attitude with a creative idea
• Passionate working attitude to pursue a goal with patience.
• Flexibility for changes

Academic Qualifications

• A bachelor’s degree or higher in Chemical, Bioengineering, Mechanical, Optical Engineering or related fields.

Travel requirements

• 2-3 international travel annually mainly Thailand.

By submitting your application, you consent to HOYA Group collecting, disclosing, and retaining your personal data for employment assessment and verification purposes.

If you are shortlisted, we will contact you within three weeks of your application. Thank you for your application and understanding.

We are looking for a Staff Analog Layout Engineer to contribute to the development of High-Speed Connectivity, Broadband Analog and Computing/Storage-Memory Data-Transport products (including functional blocks such as high-speed digital, multi-GHz ADC/DAC, PLL/DLL serial and parallel I/O, and clock generation/distribution for custom ICs). The candidate must have a proven record of laying out high-performance analog circuits in state-of-the-art CMOS process technologies, successfully performed top-level integrations, and placed products into volume production multiple times.

Requirements

• Bachelor’s degree in Computer Science, Electrical Engineering or related fields and at least 5+ years of related professional experience.
• Master’s degree in Computer Science, Electrical Engineering or related fields with 3+ professional experience.
• Deep understanding of layout methodology from initial chip planning to tape-out.
• Deep understanding parasitic optimizing in layout
• Experiences in advanced process technology and Fin-FET is preferable.
• Have a high level of proficiency in interpretation of CALIBRE DRC, ERC, LVS, etc. reports.
• Have a high-level proficiency/knowledge of Synopsys or CADENCE layout entry tools.
• Programming skills in any of the following are a plus: Skill or Ample or Perl, etc.
• Strong technical and analytical background, problem solving skills, etc.
• Fluent in English

• Singapore Based (Bukit Merah)
• 5 Days 8.30am to 5.30pm
• Salary - $2500 to $3500 (Depends on experience)
• Nitec or Diploma in Electrical Engineering or Equivalent; At least 1 year experience in sales/customer service.
• Career Progression Opportunities

Requirements

• Nitec or Diploma in Electrical Engineering or Equivalent
• At least on year experience in sales/customer service
• Electrical Knowledge

Job scope

• Your job and responsibilities include support sales personnel for pre-sales activities, proposing solution that suits customer needs & resolve related solution for site preparation, installation, start-up, commissioning, repair and maintenance of Electrical Power System, Structural cabling, Fire suppression system, UPS, Security Access and CCTV Monitoring System etc.
• To supervise and oversee the work progress of project sites. This includes attending to site meeting, coordinating with appointed sub-contractors of various services to see to a smooth completion of projects.
• You will be assisting the Electrical Service Department in providing technical support to our staff, customers, and dealers.
• Prepare and maintain all project management documentation in accordance with company’s best practices.
• Planning and monitoring the project to ensure successful completion within planned timeline as well as status of progress-in-work and report all matters related to project and services.
• You are required to perform a complete in-house testing of Power equipment’s.
• Answer and attend to service calls, fault-finding, repair and troubleshooting of Electrical System and Power equipment malfunction.
• Establish and maintain excellent relationships with the customer project team, supplier, sub-contractors, and clients.
• Coordinate and liaise with PEs and/or site supervisors on detail drawings, layout planning and understanding of site requirements.
• Prepare, submit, and follow up with applications to the relevant authorities or building management where required.
• Preparation of electrical products data & engineering drawing in AutoCAD (2D, 3D).
• You may be assigned with other job duties and functions as may be instructed from time to time by your superior or the management.

Kylen Seah Reg No: R24124248

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

Your role will include (*you don’t have to be proficient for all of them*):

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. Check out the link above for more information, and send your CV to [email protected]

• Well established Company
• Basic $3500 - $ 5000 + AWS + Variable Bonus
• Working location: Northeast
• Working hours: 8:30am – 5:30pm (Mon to Fri)
• Electrical & Electronics (E&E) |CCTV | ELV
• Training Provided

Job Responsibilities:

• Lead and manage facilities, security projects and maintenance from concept till complete
• Collaborate with cross-functional teams to gather requirements and design custom solutions
• Implement and optimize surveillance techniques
• Implement maintenance regime on facilities ensuring low downtime
• Ensure projects are completed on time, within budget and meet the highest quality standards

Requirements:

• Diploma and/or Degree in Electrical and Electronics Engineering or Instrumentation Control or equivalent
• Experience in CCTV / Project Execution
• Training Provided

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

[Singaporean only]

• operate on machine/process units as assigned.
• Perform troubleshooting for machine / equipment failures to meet production targets and quality standards and/or specifications.
• Perform Preventive Maintenance (Cleaning, Service, Replace)
• While operating on machine to perform tasks, always check and record the machine or process parameters and take containment and corrective actions if necessary, to ensure that machine or process is under control.
• Sampling inspection of parts as per Quality plan to ensure that the products are within specifications. If out of specification, handle the disposition of non-conforming products as and when required by the Quality plan.
• Support Team Leader to execute changes and projects within production area and ensuring compliance to EHS requirements, quality, cost and schedule.
• Accuracy in update of machine MES satellite e.g. correct component lot numbers, accurate shift output, waste and downtime.
• Manage Material handling activities which include packing/unpacking, loading/unloading.

Requirements :
-A level/Nitec/Diploma/Technical electrical
- Knowledge and hands-on experience on related system
- Experience in Medical Devices Manufacturing or relevant industry.

EA License No: 95C2823

EA Personnel No: R23112241

EA Personnel Name: Jin Yee

ASM is a leading global supplier of products, services, and materials for semiconductor processing. For more than half a century, innovation has been at the core of everything we do. Our smart, ambitious people are dedicated to creating cutting-edge solutions for the world’s leading semiconductor providers. Every day we push the development of next-generation computer-chip technology, always staying a few steps ahead of what’s next.

The talented, enthusiastic people at ASM are just like you: dedicated to improving people’s lives and unlocking new potential. With our collaborative approach to R&D, we advance key semiconductor technologies and platforms like ALD, epitaxy, PEALD, PECVD, and vertical furnaces. And we have recently entered the promising high-growth market: silicon carbide epitaxy. Year after year, our innovations help to make chips smaller, faster, and more powerful. In fact, you will find our technology in every aspect of modern life: in AI, medical equipment, 5G, smartphones, autonomous driving, and more.

Responsibilities:

• Take the lead in timely completion of production plan in maintaining and improving workmanship standards
• Scheduling and assigning adequate resources, monitoring progress, and resolving problem
• Report to the Senior Manager in reporting shift production status
• Key personnel in leading independently on discipline and planning for the manufacturing team
• Manage team's recruitment, appraisals and ensure that the training skills are met for current and future demands of the shift.
• Maintain a clean and safe working area with housekeeping standards for employees and ensure that they conform to safety rules and regulations
• Project - Lead and/or participate in lean and continuous project improvement initiatives
• Work closely with other Shift Supervisors to ensure production handovers are effectively communicated
• Create and revise systems and procedures by analyzing operating practices and requesting/ implementing change.

Requirements

• Minimum Diploma in Engineering or equivalent
• Minimum 5 years of experience in either a technical environment in aviation, capital equipment or manufacturing industry
• Minimum 3 years of supervisory experience for a team of technical staffs (technicians/ operators)
• Prior hands-on experience in equipment manufacturing (i.e. mechanical/electrical, troubleshooting)
• Able to perform a 3 month, 12 hour rotating shifts (Both day & night shift)
• Able to demonstrate good communication, organizational, analytical and interpersonal skills
• Experience in implementing continuous improvement projects (Lean/Kaizen) and demonstrate resource planning capability

At ASM we are committed to supporting our people, enabling them to develop their talents and perform at their best. We actively promote an inclusive and diverse culture that fosters trust and transparency. Our people are our power, and we value the differences between everyone because it is what make us better as a team. By embracing a wide range of perspectives, we enable a culture of continuous exploration and adoption of new ideas. At every step, we know that it is our valued people who enable us to deliver excellent products and service to our clients – and to make a meaningful difference in society.

So join us on our journey and unleash the power of an open mind. Discover how you can be part of our exciting future and apply today! To learn more about ASM, find us at asm.com and on LinkedIn, Facebook, Instagram and YouTube.

• Ensures the smooth day-to-day operation on a production floor.
• Ensure the manufacturing process remains smooth and efficient by organizing workflows and monitoring staff.
• Analyse job process requirement, give recommendations and process improvements implementation.
• Investigate problems, analyse root causes and derive resolutions to customer complaints.

• Calculate total daily production quantity output and check balance quantity per plan order.
• Encode transfer note finished goods (FG) and work in process (WIP) to the MRP.
• Daily checking of the part inventory stock on the MRP.
• Record the quantity of incoming insert that will use in the production.
• Prepare percentage planning yielding weekly report and percentage production efficiency weekly report.
• Prepare report on daily rejection part and record in the non-conforming report.
• Coordinate with the planner regarding production plan of the production.
• Prepare material weekly inventory.
• Prepare label that will use in the production.
• Prepare overtime and leave form of the production personnel and submit to HR department.
• File production related document like part samples, sample approval form and injection molding parameter data to the filing cabinet.
• Withdraw production office supplies every week in the administration office.
• Follow ISO 9001, ISO 13485 and safety rules and regulations.
• Implement 5S and good housekeeping in the production area.
• Performs other tasks assigned by his supervisor to achieve department objective.

Requirements:

• At least secondary level can write and speak simple English.
• At least 6 months experience in clerical works.
• With basic knowledge in computer MS office.

Working Location: AMK

Job Description:

- Able to lead, train and coach team member

- Manage and handle daily production purchase, inventory, stock, and work schedule

- Willing to learn and participate from the start to the end finishing product

- Cleaning and troubleshoot in production machines

- Responsible for the whole process of the manufacturing from purchase, withdraw, issue until handover to warehouse

- Create, maintain and update the SAP system

- ISO documentation update, recording and maintenance

- Responsible for the internal and external audit process and documentation

- Co-operate with inter department to ensure the production is running as per schedule

- Other task/assignment given by the Superior/Management

Job Requirements:

- Diploma with Engineering Chemical or Chemistry background will be advantage

- At least 3-5 years manufacturing work experience required

- Independent thinker who acts and decides objectively and with integrity

- Willing to learn new things and hands on

- Excellent communication so as to provide training and coaching to team member and also to handle queries from clients/associates

- Computer literate

Other information:

- AWS & Variable Bonus

- Medical and dental benefits

- Working location: Ang Mo Kio area (3 bus stops from Yio Chu Kang Interchange)

- Working days: 5.5 days work week

- Working hours: Monday to Friday 9am to 6pm, Saturday 9am to 1pm

Compensation & Benefits

• Annual Increment
• Performance Incentive Bonus
• Career Progression

For quick reply, please contact me at +65 85878287

Registration Number: R21100938

EA Licence No: 22C1301 (Unisearch Services Pte Ltd)

• Handle the preparation and modification of schematic, detailed, and production drawings for precast concrete components, steel molds, and reinforced concrete structures, and address technical and design challenges following Singapore's established standards.
• Responsible for preparing 2D and 3D presentations and design drawings, as well as compiling data and performing basic design computations.
• Expected to engage in client liaison, coordinate with authorities, consultants, and subcontractors, and attend design and construction meetings
• Provide guidance and support to less experienced staff or colleagues in their tasks.

Requirements:

• Diploma / Degree in Civil Engineering
• At least 2 years relevant experience.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

• Well Established Company
• Basic $3000 - $4500 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working hours : Normal working hours
• Training provided for those without/lesser experience

Job Responsibilities:

• Manage project and site activities, attend project meeting
• Perform equipment set up, start-up and commissioning
• Project implementation to ensure the successful and smooth delivery of systems/projects through effective planning, management, and deployment of resources
• Provide technical support and troubleshoot equipment faults after project handover
• Familiar with Singapore safety regulations and process. Prepare and submit project safety documents
• Manage project-related submission and paperwork by ensuring all necessary materials are current, properly filed and stored
• Works closely with the Project Team, Manufacturers and Vendors to deliver Customer’s expectation within timeline
• Involves in technical specifications review of the project scope
• Provide operational and maintenance training to customers
• Any ad hoc duties as assigned

Job Requirements:

• Minimum ITE/Diploma/Degree in Mechanical Engineering or its equivalent
• Training provided for those without/lesser experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Collaborate closely with the Planning and Project Controls Manager to perform planning and scheduling, risk management, cost control, and reporting activities throughout the detailed design and construction phases of the project.
• Act as the main contact for planning, scheduling, and cost analysis, developing accurate cost forecasts and actionable reports to support effective project management.
• Prepare and deliver clear status reports, issue network-based schedules, update Primavera P6 with project progress, and monitor earned value systems to guide team performance and understanding.
• Strong knowledge of planning and scheduling to identify scheduling issues and recommend corrective actions and implement relevant control services.

Requirements:

• Degree in Project Management or equivalent
• At least 5 years EPC/full-service project delivery processes and apply project controls methodologies and practices specifically related to cost control development.
• Strong verbal and written communication skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

• Well Established Company
• Basic $3000 - $3800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working day: Monday to Friday
• Working hours: 8.15am to 5.15pm

Job Responsibilities:

• Responsible for outdoor and indoor repair work of all cleaning products
• Mechanical preventive maintenance - verify mechanical faults, replacement of spare parts and repair
• Work closely with service technicians for problem solving and coordinating jobs between field service and workshop repairs
• Any ad hoc duties as assigned

Job Requirements:

• Possess at least a Professional Certificate/ Nitec in any Electrical & Electronic or Mechatronics Engineering or relevant qualification
• Experience in repair of forklifts, automobiles, heavy industrial equipment, and knowledge in engines, motors and electrical would be relevant and useful

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well established Company
• Basic $3500 - $ 5000 + AWS + Variable Bonus
• Working location: Northeast
• Working hours: 8:30am – 5:30pm (Mon to Fri)
• PLC | SCADA
• Corrective / Preventive

Job Responsibilities:

• Coordination with stakeholders of different levels (customers, contractors, vendors) on project maintenance work
• Deployment of software and hardware at sites
• Work with procurement to source for materials and equipment requited for project
• Attend site meetings and be involved in discussion on all project related activities with clients
• Work with stakeholders to plan and schedule site activities, ensuring sufficient materials and manpower support
• Execute responsive preventative and corrective maintenance for system
• Perform system analysis and troubleshooting
• Other ad-hoc duties as assigned

Requirements:

• Diploma and/or Degree in Electrical and Electronics Engineering or equivalent
• Basic Experience in AutoCAD Software
• Supervision for subcontractors for site work
• Training provided

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description:

• To ensure that the Engineering designs are in compliance with project specific requirements, and in-line with the Engineering Standard Practice, Company’s ISO procedures, national and international engineering norms, codes, and safety requirements.
• Generate block diagrams, bill of materials, functional design specifications, design calculation, wiring drawings, and all other documents and drawings as required by project and necessary to ensure equipment can be procured, integrated, tested, installed and handed over to the customer on schedule.
• Ensure equipment supplied for a specific project is technically compliant with relevant specification requirements, project technical standards, correctly configured and completed.
• Ensures equipment specified and designed can be successfully integrated with other equipment with which it has to interface to.
• Produces test procedure documentation appropriate to project commissioning.
• Provides technical support to system assembly and integration team.
• Perform other ad-hoc duties as assigned by the Projects & Retrofit Manager / Assistant Manager

Requirements:

• Knowledge in AutoCAD
• MS Office
• Diploma / Bachelor / College Degree equivalent certifications in IT / Engineering with at least 2 years of experience in the field or in a related area

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Ding Xin Er

EA Personnel Reg No: R22106669

- Salary:$4,500 to $6,200 + AWS + at least 3 months Variable Bonus

- Japanese MNC

- Proficient in Japanese to liaise with Japanese speaking counterparts

- Location: Central, walking distance from MRT Station

Responsibilities:

• Responsible to manage Japanese clients
• Coordination with Japan HQ
• Coordination on pricing with marketing division and preparation of quotes to clients
• Sales forecast and work with clients to ensure smooth deliveries to clients

Requirement:

• Proficient in Japanese to coordinate with Japanese speaking counterparts
• Experience in Semiconductor or Electronics industry will have advantage

Kindly email your resume in a detailed Word format to

[email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

EA License Number: 02C4944

Registration Number: R1217882

Posting Personnel: Yeo Yi Rong

Tel: 6950 9757

• Lead a team of Engineers to oversee all test-related activities for Server and Rack products in production.
• Support and implement PXE Server configuration for the products.
• Conduct and maintain the Server and Rack run-in test processes.
• Perform and maintain the burn-in and power test processes.
• Coordinate with customers and HQ/factory regarding test program implementation and maintenance.
• Test and analyze failures in production products, collaborating with customers and HQ/factory to drive improvements.
• Participate in Kaizen activities.
• Update and track the test program master list.
• Prepare and update Working Instructions.
• Provide training on Working Instructions to production teams.
• Support the NPI (New Product Introduction) process.
• Assist with production during mass runs.
• Engage in ISO activities related to implementation and maintenance.

Requirements:

• Minimum Diploma in an Engineering discipline with at least 3 years of relevant experience in Server/Rack/Manufacturing environments.
• Ability to work effectively with customers, HQ/factory, peers, subordinates, and superiors.
• Knowledge of SAP and Linux.
• Capable of multitasking and working under pressure.
• Strong understanding of test methods and concepts.
• Proficiency in programming and debugging skills.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

[Singaporean only]

• Supervise and manage production staff, including operators and assistants.
• Communicating regularly with upper management regarding problems or issues impacting production
• Evaluating machine resources to ensure continued production and minimal downtime
• Establishing a balance between increased productivity and reduced costs of manufacturing operations
• Monitor production processes, adjust workflow as needed, and troubleshoot any issues.
• Setting productivity goals for each manufacturing team
• Developing workflow policies and procedures that improve efficiency without compromising safety or quality
• Plan and oversee daily production schedules, ensuring output meets quality and quantity targets.
• Ensure proper use and maintenance of equipment and machinery.
• Collaborate with the quality control team to meet safety and quality standards.
• Maintain records of production data and report on productivity and efficiency.
• Any other duties as assigned from time to time.

Job Requirements

• 3-5 years of experience managing production in sauces and paste, or similar food processing.
• Strong knowledge of production processes, equipment, and food safety regulations.
• Leadership skills with experience managing production teams.
• Strong problem-solving abilities and attention to detail.
• 5 days work week, based at Senoko.

ASM is a leading global supplier of products, services, and materials for semiconductor processing. For more than half a century, innovation has been at the core of everything we do. Our smart, ambitious people are dedicated to creating cutting-edge solutions for the world’s leading semiconductor providers. Every day we push the development of next-generation computer-chip technology, always staying a few steps ahead of what’s next.

The talented, enthusiastic people at ASM are just like you: dedicated to improving people’s lives and unlocking new potential. With our collaborative approach to R&D, we advance key semiconductor technologies and platforms like ALD, epitaxy, PEALD, PECVD, and vertical furnaces. And we have recently entered the promising high-growth market: silicon carbide epitaxy. Year after year, our innovations help to make chips smaller, faster, and more powerful. In fact, you will find our technology in every aspect of modern life: in AI, medical equipment, 5G, smartphones, autonomous driving, and more.

Responsibilities

• Strong familiarity with BOM and multi-level BOM structure for semiconductor equipment manufacturing.
• Prompt and accurate project analysis, demand loading, change management and project management leading to project closure with focus on required deliverables at each milestone leading to successful project closure and on-time delivery for all shipments
• Plan and prepare production schedules for respective production lines according to established and committed manufacturing milestones and Build Plan
• Lead and drive all related functions to meet on-time to Assy Start Date, on-time to PMCD and on-time delivery.
• Strong understanding and ability to manage Engineering Changes and configuration changes in an SAP PLM environment
• Strong team player with hands-on approach, strong ability to drive and manage escalations, drive priority calls for slot swaps and material allocation while supporting day-to-day operations with close follow-up on all outstanding issues in order to mitigate all risks to OTD
• Act as key point of contact between Project Manager, Manufacturing Engineering, Business Control, Manufacturing, Supply Chain, Quality, Warehouse and BPS/Shipping on matters pertaining to assigned projects, with excellent ability to engage internal/external departments as deemed necessary
• Support on-going continuous improvement programs and process enhancements in an evolving and dynamic business environment
• Implement continuous process improvement through planning, evaluating, verifying and executing procedures to ensure that products meet all customer requirements in terms of cycle time and shipment delivery

Requirements

• Minimum Bachelor’s Degree in Engineering, Supply Chain Management or equvialent
• Minimum 5 years of production planning experience in a manufacturing or in a low volume high mix manufacturing environment
• Ability to adapt quickly to changes in a fast-paced environment
• Good analytical, communication and interpersonal skills with cross-functional teams
• Experience in SAP MM or SAP PLM, Microsoft Excel and Power BI
• Good with numbers, detailed and meticulous
• Methodological approach with good understanding of business processes
• Independent, diligent, driven and highly motivated personality
• Good team player

At ASM we are committed to supporting our people, enabling them to develop their talents and perform at their best. We actively promote an inclusive and diverse culture that fosters trust and transparency. Our people are our power, and we value the differences between everyone because it is what make us better as a team. By embracing a wide range of perspectives, we enable a culture of continuous exploration and adoption of new ideas. At every step, we know that it is our valued people who enable us to deliver excellent products and service to our clients – and to make a meaningful difference in society.

So join us on our journey and unleash the power of an open mind. Discover how you can be part of our exciting future and apply today! To learn more about ASM, find us at asm.com and on LinkedIn, Facebook, Instagram and YouTube.