Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Electrical Engineer (Marine offshore)

• Penjuru (Transport Pickup Provided at: Jurong East, Choa Chu Kang, Bishan & Serangoon)
• Monday to Friday 8.30am to 6pm.
• Salary range: S$ 3,500 - 4,200

Job Responsibilities:

• Design control systems
• Preparation of drawings for customer approval
• Preparation of drawings/ BCM for shop floor production
• Co-ordinating with clients, consultants and internal department.
• Drafting work with use of CAD system (AUTOCAD/SOLIDWORKS).
• Any other ad-hoc duties as assigned.

Requirements:

• Diploma or Bachelor’s Degree in Electrical Engineering.
• Hands on experience with vessel mechanical and engine systems.
• Experience with engineering design software.
• Familiarity with maritime HM&E systems and naval construction processes.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

This role requires highly cross functional interactions with key site functions to ensure success in production and release performance. Individual must be able to effectively communicate and collaborate closely with the team members and various SME to ensure equipment are operational to sustain daily operations, resolve operation challenges and implement effective measures to address the challenges to ensure without compromising on safety and compliance.

Location: Tuas

Salary up to $10000

1 Year Contract

Design & Project Engineering:

• Support NPI and Site projects as Engineering Technical Lead or Subject matter experts for process equipment
• Provide technical expertise in site selection assessment to identify equipment/facility gaps, select new equipment, assess layout/utilities capacity and partner project managers to develop project cost and schedule.
• Lead F&E to participate in technical transfer activities and cross-functional meetings.
• Work independently and/or with project managers to complete engineering projects of various scales within schedule, budget and quality constraints.
• Effectively manage and work with project CQV team to ensure timely delivery of projects.
• Prompt updates or escalation of issues and challenges
• Responsible for commissioning and qualification activities including FAT, SAT, PSSR, automation checkouts, IQ, OQ, PQ, and asset/preventive maintenance/spare parts creation for new process equipment.
• Participate in the system walk-down, ensure the closure of punch items and support the takeover of the system from the project team
• Work closely with project managers to introduce new equipment including development of business case, project charter, user requirement specifications, quality risk assessments, conceptual design, preliminary design, design specifications and detail design.
• Participate in design review and setup up of new asset and associated maintenance plan/spares in Maximo.
• Work with research, manufacturing, process development, utilities, facilities, quality assurance and validation departments in developing requirements and recommendations for large and/or highly complex system/facility modifications.
• Work with project managers to complete design and engineering projects within schedule, budget and quality constraints.
• Develop technical solutions to complex problems requiring the regular use of ingenuity and creativity.

Daily Operations

• Accountability and ownership of assigned equipment
• Subject matter expert for process equipment performance and operation to ensure safety, compliance and sustained operation
• Effectively communicate and collaborate with cross function stakeholders to address operational challenges and concerns to ensure sustained operation and minimal interruptions to operations activities.
• Lead and participate in equipment breakdown investigations to identify root causes. Effectively communicate to the customers on the subsequent plans, short term, and long-term mitigating actions.
• Collaborate closely with cross functional SME to implement effective corrective, preventive action and improvements to eliminate or mitigate future recurrence.
• Ensure operation continuity through asset lifecycle management planning, assess and identify impact to safety, compliance, operational schedule and cost.
• Perform assessment for equipment during new product introduction, change controls and other qualifications activities to ensure equipment are in its validated state.
• Accountable for deviation/change control associated to process equipment performance.
• Responsible for investigation of deviations, development of corrective and preventive actions
• and implementation of change controls in a timely manner.
• Support equipment readiness initiatives for New Product Introduction or Product Campaign Changeover
• Responsible for operation and reliability of Biotechnology process equipment and/or single use systems assigned.
• Apply process equipment knowledge to perform troubleshooting of equipment failures/malfunctions and the development of technical assessments during normal working hours and after hours when required.
• Develop, implement and optimize maintenance and reliability activities such as preventive maintenance, job plan and datasheet development in Maximo.
• Apply knowledge of Operational Excellence practices such as lean maintenance to drive continuous improvement.
• Responsible for completion of process equipment periodic review, data integrity assessment and security assessment in a timely manner
• Collect, organize, analyze and present results for operational issues or engineering projects of various scale and complexity.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E EA License No. 01C4394 • EA Registration No. R21103542 (Ling Kai Jin)

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tacand the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries.

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a E&I Engineer to assist their E&I team for the next phrase of their business. They are located in South – easily accessible.

Duties of E&I Engineer:

• Review project specs to ensure equipment meets contract requirements
• Prepare and approve instrument and electrical deliverables (e.g. wiring diagrams, lists, data sheets)
• Create material requests and evaluate bids for electrical and instrument equipment
• Develop engineering standards and procedures for design
• Monitor project costs and schedules
• Attend technical meetings and address client feedback
• Support plant start-up and on-site troubleshooting
• Provide technical support and estimates to the sales team
• Advise engineers and Project Managers
• Follow company health and safety guidelines

Requirements

• Minimum Degree in Engineering/ Electrical or equivalent
• Minimum 5 years of relevant experience
• Familiar with key engineering concepts and practices
• Strong organizational and multi-tasking skills
• Excellent problem-solving and analytical abilities
• Proficient in Microsoft Office, Microsoft Project, and AutoCAD
• Strong verbal and written communication skills
• Able to work independently with attention to detail
• Good teamwork skills
• Knowledge of hazard area classification
• Fluent in English (speaking and writing)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682

EA Personnel No: R21101676

EA Personnel Name: Ng Zhi Qing Alethea

This is a 12 months contract assigned to our client

Work Location: To be confirmed (during interview)

Salary Range: $9,000-$12,000

Responsibilities: As a BI Engineer, you will be responsible for developing and maintaining the Microstrategy setup within the overall Data Platform. The engineer must be able to discuss requirements with the clients and support in setup and issue rectifications.

Top 3 skills (must have)

1. MicroStrategy Business Intelligence

2. ETL Pipelines

3. Data Modeling Techniques and Methodologies , strong MSTR knowledge

The Lead Resident Engineer shall be in the discipline of Electrical, Instrumentation & Control in delivery of large scale power generation project. The Engineer shall have at least 10 years of relevant engineering experience in delivery of large scale industrial/ utilities projects (e.g. waste, water, oil & gas, power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste treatment).

The duties shall include the following but not limited to:

• Work as owner’s engineer to lead the ICA project implementation at site.
• Assist Chief Resident Engineer in daily supervision and coordination duties for ICA discipline.
• Project delivery planning including time and manpower scheduling.
• Source and interview for Resident Engineers and Resident Technical Officers for ICA discipline
• Strong capability of specification capability for all ICA related specification. e.g. DCS / PLC system configuration, topology and controller, RIO engineering.
• Enforce Specifications, International Standards, Singapore Standards and good practices
• In depth of understanding for automation package for contract implementation of automation systems for WtE project.
• Contracts management of ICA discipline for the WtE project
• Review the EICA submittals from Contractors for Process like Waste Reception system, Incinerator-Boiler System, Water Steam Cycle, weighbridge system, building services, Enterprise Resources Planning, Communication Network Infrastructure, DCS, PLC, EMIS, PFMS etc.
• Essential understanding of P&ID of process engineering
• Liase with Engineering Manager and the Project Technical Specialists on the review and approval of design submissions including calculations and drawings
• Engage in Technical discussion EICA related issues with contractor and client
• Attend site meetings and resolve technical issues with Contractors
• ·Define Inspection and Special testing requirement and ensure coordination of those efforts on all contracts
• Ensure the documentation fully complies with the specifications and standards
• Participate in HAZOP review, SIL safety and design for safety workshops
• Work with electrical team closely for all power and process interfaces
• Participation in FAT of automation equipment, DCS, PMS, PLC and RIO
• Provide Technical support in Testing and Commissioning of the plant

Job Requirements:

• Degree in Electrical / Electronic / Instrumentation & Control Engineering recognized by the Professional Engineers Board
• Registered as Resident Engineer with the Joint Accreditation Committee of the Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• At least 10 years of relevant experience in design and construction of large Waste to Energy (WTE) project or waste/water management projects in Singapore, particularly experience in power plant or WTE processes.

Job Description & Requirements

Responsibilities

• Liase with Architects, Clients and other Consultants for the design of structural and civil Engineering works.
• Design , coordinate, manage and supervise the civil & structural project that has been assigned.
• Perform structural analysis and design including drafting in building or any structures as required by the project.
• Liase with clients & consultants to meet C & S requirements for submissions to local authorities.
• Coordinate to ensure civil and structural requirements is meet for project tender,submission and construction schedule.

Requirements

• Degree in Civil / Structural Engineering.
• 1-2 experience in Structural Design and able to work independently will be preferred.
• Entry Level Candidate without experience are welcome to apply.
• Knowledge in AutoCad & Structural Software e.g. STAAD. Pro, Orion, Esteem, MidasGen, STRAP, etc will be advantage.
• Good positive working attitude, self-motivated and responsible.
• Salary will be commensurate based on working experience.

• Job Purpose

Biosearch Technologies™ provides products and services for genomic analysis that support mission critical applications for global customers in agrigenomics and human healthcare. The portfolio offers integrated tools and technologies to accelerate sample preparation, amplification, cloning and expression, next generation sequencing (NGS), custom oligonucleotide synthesis, nucleic acid chemistry reagents, and oligo therapeutics. Biosearch Technologies is currently recruiting for a field service engineer II to join us in providing front-line technical support to our repertoire of genomics platform and consumables as described above.

With a focus on always putting customers first, our Field Service Engineer is expected to work closely with our regional customer base to ensure maximum equipment uptime, software optimal utilization, training and troubleshooting functions. 

Field Service Engineer is expected to be a role model and poise to mentor and develop junior service engineers on the day-to-day activities, coaching sessions and able to report and assign task to juniors and self and provide reports back to global service leads.

Key Responsibilities

• Build strong service support rapport with regional key account customers in APAC.
• Site Preparation; instrument Installations; training; troubleshooting, preventative maintenance as core task
• Facilitating service contract proposals and tracking as and when required.
• Function as an integral part of a wider global support team to offer “In Time zone 24/7” emergency service support call and troubleshooting assistance as and when assigned with urgent breakdown call with overnight travel either regionally or globally.    
• Train and support customer in the application of “SFDC sales force” CRM platform as a service case tool to record and track service cases
• Support the generation of training aids and technical documentations as required
• Provide timely and concise Pre/Post trip reports and SFDC updates to maintain proper customer CRM records
• Work closely with the commercial and customer service team to ensure prompt and responsive customer support in building strong customer allegiance for the LGC, D&G branding.
• After normal office hours on-call support assignments (global support rotation) as part of a global technical support framework.
• Involving in engineering project, product management request for technical feedback/support
• The individual will be responsible for instrument commissioning, training, test and repair of equipment, and preventative maintenance.
• Expected to mentor junior field service engineers in problem resolution.
• Seeks continuous improvement processes to optimize technical support to our customers in the region.
• This position is responsible to effectively communicate instrument status, issues, and customer complaints and needs to appropriate managers and internal resources.  Will be responsible to proactively take ownership and follow-through with generated issues or complaints reported from themselves, as assigned, or from junior service engineers.
• Responds with flexibility and collaboration to the needs of the business – both internally and externally – by addressing important corporate initiatives when requested by management.
• Ability to handle clients, distributors professionally during all interface and maintain a positive company images
• The motivation to learn and constantly improve processes and tools
• Adhere to company safety standards and promote safety culture throughout the company
• Any other ad-hoc projects and duties as required by the management

Job Responsibilities:

• Handle and prepare materials required for production operations.
• Perform material transfers to production areas and collaborate with the store to avoid delays.
• Ensure materials are properly identified and prevent mix-ups.
• Store materials appropriately and maintain inventory organization.
• Practice Good Manufacturing Practices (GMP) and uphold excellent housekeeping standards.
• Ensure accurate product packaging, clear identification, and proper segregation of materials and finished goods (FG).
• Load the correct materials into respective machines efficiently.
• Suggest and recommend quality improvement measures to the immediate superior.

Requirements:

• Ability to read and understand basic English instructions.
• Capability to perform simple calculations.
• Physically able to carry and manage 25kg resin bags and top up machine dryers as required.

Working Hours & Days:

• Night Shift: Monday–Friday: 11 PM–7 AM (Next Day)
• Off/Rest Day: Sunday or Saturday & Sunday

Benefits:

• AWS: Yes
• Extra Benefits:Medical and dental benefits
  Annual Leave: Starts at 8 days in the first year, with 1 additional day for each subsequent year (up to 14 days).
  

EA Personnel Name: Wong Choo Sian
EA Personnel No: R1762582
EA License No: 23C1703

Production Crew

Working Days & Hours: 5 days (Mon- Fridays) 8am-5pm
Working Location: 15 Senoko Drive, #06-10 JTC Foodhub, Singapore 758202
Salary : $1.6k +350 fixed allowance+350 outlet incentive=Gross $2200


Job Responsibilities:

• Perform general production operator duties to uphold quality standard, ensure safe and efficient operations at work.
• Operate cooking machines according to standard procedure
• Preparation of ingredients based on standard procedure
• Check and inspect of raw/ finish material.
• Maintain proper general kitchen cleanliness of the kitchen.
• Follow safety, BRCGS, SFA and company SOPs at all times.
• Highlight any issues to superior and seek resolutions immediately.
• Any other job duties as assigned.

Job Requirement:

• Relevant Experience in Food Manufacturing

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

Maintenance

• Provide technical services to maintain and troubleshoot different computer and electrical systems.
• Attend and carry out Fault Finding and Diagnosis of systems breakdowns, both on a mechanical and electrical basis, with a focus on providing high levels of service and response times.
• Follow Preventive Maintenance work schedules to specified standards and procedures and maintain all relevant written records
• Follow up and close all incidents, issues and request timely
• Support Project Team on some site installations and testing and commissioning matters.
• Be available for on call and stand by duty procedures and other responsibilities required.
• To follow all company business operation and SOP at all times
• Participate actively in Health Safety and Environment programs and activities in order to achieve Company’s KPIs, ISO 14001 objectives and target. Proactively rectify any abnormalities, unsafe acts or unsafe situations and report to supervisor accordingly.
• Maintain high standard of housekeeping at all times
• Other ad-hoc duties as assigned by immediate supervisor.

Requirements

• Higher Nitec in Electrical Engineering / Mechanical Engineering
• At least 1-2 years of relevant working experience
• Possess at least Class 3 license manual to operate vehicle for onsite support
• Knowledge on computer server maintenance, network troubleshooting, basic software troubleshooting.
• Knowledge on Firewall, Backup solution and Anti-virus solution
• Good communication and interpersonal skills
• Able to perform standby duties after office hours and provide onsite support, if required.

JOB SCOPE:

Design, develop and deliver working software applications to delight customers
Improve software quality using XP practices such as code review and unit testing
Adheres to the Software Craftsmanship Manifesto
Prepare architectural and other technical documents
Assist on: user stories elaboration, test automation and bug fixes, build and release automation

Requirements

Solid experience in any of technologies: Java, NodeJS, Ruby on Rails, .Net , Agile, ReactJs
Experience with version control systems such as Git, Continuous Integration (Bamboo/TeamCity)
Experience developing in Mac/Linux environment
Experience working in agile teams – TDD, Pair programming, Scrum, XP
Familiar with both Windows and UNIX/Linux servers, Design Patterns, Unit Testing

Requires software engineering experience, in particular to equipment such as Automatic Guided Vehicle (Car Parking) systems.

Salary $3500.

Five and half (5.5) work days per week.

Fourteen (14) days annual leave.

Medical Leave.

Ability to speak Mandarin will be advantages because needs to converse with our manufacturer's engineers in China/Taiwan.

Need to be able to work independently.

Be a catalyst for change and drive sustainability forward with us at The Westin Singapore, where your passion transforms into meaningful action.

As a Duty Engineer, you will be tasked to:

• Install, maintain, perform preventative maintenance on, and recommend replacement of tools, appliances, and equipment for the hotel
• Respond and attend to guest rectification requests
• Ensure team is aligned with The Westin brand standards
• Calibrate all controls, gauges, meters, etc.
• Identify, locate, and operate all shut-off valves.
• Order, mark, and stock parts and supplies as needed.
• Maintain inventory and purchase orders log.
• Inspect tools, equipment, or machines. Enter and locate work-related information using computers.
• Operate power lift.
• Complete the life safety checklist, including the fire-pump run test and generator run test.
• Inspect fire sprinkler valves and alarm systems.
• Assist in development of disaster response protocols.
• Supervise the Engineering Team in daily tasks.
• Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees.
• Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications.
• Ensure uniform and personal appearance are clean and professional and maintain confidentiality of proprietary information.
• Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, and assist individuals with disabilities.
• Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees.
• Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings.
• Speak with others using clear and professional language.
• Visually inspect tools, equipment, or machines.
• Reach overhead and below the knees, including bending, twisting, pulling, and stooping.
• Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance.
• Grasp, turn, and manipulate objects of varying size and weight. Stand, sit, or walk for an extended period of time.
• Move up and down stairs and/or service ramps.
• Perform other reasonable job duties as requested by Management

Job Description & Requirements

Responsibilities
The requirement requires an experienced network data analyst. The role will be responsible for execution on our network capacity planning strategy and best practices. Under the direction and leadership of the Network Capacity Planning Product Manager, the primary responsibility of this analyst is to gather information from networking monitoring tools and system logs, analyse the information to make informed decisions regarding the enterprise network’s capacity and performance.

Functional Responsibilities

· Collaborate with demand management, network teams, and business units to understand current and future network requirements for capacity planning aligned with business goals.

· Conduct thorough analysis of network traffic, utilization rates, and performance metrics using predictive analysis to identify bottlenecks and areas for improvement. Incorporate historical data and consider projected growth and scalability requirements.

· Collaborate with network engineers and implementation teams to plan hardware upgrades or enhancements to components of the network infrastructure.

· Provide regular reports to management and stakeholders, including KPIs, utilization metrics, and recommendations for optimizing network capacity.

· Identify and mitigate potential risks related to capacity failures, network congestion, and implement measures to minimize performance degradation and outages.

· Participate in cross-functional projects, collaborating with project teams to incorporate capacity planning requirements into project plans and timelines.

Professional Responsibilities

· Possess superior interpersonal and communication skills, writing clear and concise proposals and presentations and interfacing with peer, management, stakeholders, and executives

· Ability to create clear and concise presentations for management, stakeholders and executives

· Ability to coordinate work tasks with others for timely completion and to avoid potential setbacks

· Ability to articulate complex and technical ideas accurately and clearly

· Ability to adapt current work processes to meet emerging needs and the ability to evaluate new ideas and proposed methods for practicality and ease of implementation

Qualification and Experience

· Bachelor's degree from an accredited educational institution or equivalent corporate working experience

· Familiarity with key components and best practices of Observability

· 8+ years of strong engineering or operations experience with the components of a large global network infrastructure such as Routers, switches, LAN/SD-WAN, Load Balancer, Wireless, Cloud Networking and etc

· 2 years of specific experience in analytics or able to clearly articulate data driven decision making process

· Familiarity with network monitoring, reporting, and observability tools such as: SevOne, Logic Monitor, Thousand Eyes, Moogsoft, Dynatrace, NetBrain and/or Elastic

· Administration experience with monitoring tools in creating policies, fine-tuning parameters and setting proper thresholds will be added advantage

· Experience with one or more general purpose programming languages such as Java, JavaScript, and/or Python

· Experience in Ansible will be added advantage

· Experience in production of regular capacity report which will highlight actionable items based on the logic used. Development of key thresholds that will trigger improvement action plan would be added advantage

· Passionate about data and good data evangelist

· Experience with IT service management, ITIL certification preferred

The role of the Principal Engineer is to assist the Head of MRO in planning and supervise MRO engineer. This role also needs to ensure and adherence to safety regulations, industry standards and trade compliance activities is carried out.

Primary Duties:

Reporting to Head of MRO, you will have the following key responsibilities:

• Assist the MRO Head in planning and executing MRO strategies, ensuring all activities align with organizational goals.
• Supervise MRO engineers, providing guidance and support to foster a high-performance culture within the team.
• Coordinate and liaise with customers on any MRO related matters.
• Identify areas for process improvement and implement best practices to enhance operational efficiency and reduce downtime.
• Ensure adherence to safety regulations, industry standards, and organizational policies throughout MRO operations.
• Assist in the development and management of the MRO budget, tracking expenditure and identifying cost-saving opportunities.
• Analyze maintenance metrics and performance indicators to inform decision-making and improve reliability of equipment.
• Liaise with suppliers and service providers to ensure timely availability of parts and services needed for maintenance activities.
• Support the training and development of MRO staff to enhance skills and knowledge in maintenance practices.
• Ensure adherence to all domestic and international trade regulations, including customs laws, export controls, and sanctions.
• Perform regular audits of trade activities and transactions and prepare reports for management and regulatory bodies.
• Oversee the maintenance of accurate and comprehensive records related to trade compliance activities

Key Attributes and Skills:

• Strong leadership and interpersonal skills.
• Excellent analytical and problem-solving Abilities.
• Strong organization skills with the ability to manage multiple priorities.
• Effective communication skills, both written and verbal.

Qualifications and Experience and Requirements:

• Bachelor’s degree in Electronics, Electrical, Mechanical Engineering, or a related field.
• Strong knowledge of international trade regulations, export controls, and customs compliance. (e.g. ITAR) or a related role is an advantage.
• Occasional overseas travelling is required.

JOB SCOPE:

Design, develop and deliver working software applications to delight customers
Improve software quality using XP practices such as code review and unit testing
Adheres to the Software Craftsmanship Manifesto
Prepare architectural and other technical documents
Assist on: user stories elaboration, test automation and bug fixes, build and release automation

Requirements

Solid experience in any of technologies: Java, NodeJS, Ruby on Rails, .Net , Agile, ReactJs
Experience with version control systems such as Git, Continuous Integration (Bamboo/TeamCity)
Experience developing in Mac/Linux environment
Experience working in agile teams – TDD, Pair programming, Scrum, XP
Familiar with both Windows and UNIX/Linux servers, Design Patterns, Unit Testing

• Understanding and carrying out all tasks given by the Senior Engineer.
• Collaborating with other engineers and workers to design, develop, test, and improve products and engineering processes.
• Ensuring all expenses stay within the allocated budget.
• Performing regular inspections of equipment and scheduling maintenance or repairs.
• Providing assistance to different staff or engineering teams.
• Inspecting inventory and reporting inconsistencies as well as ordering more materials.
• Producing CAD drawings according to specifications.
• Evaluating all products and processes and ensuring standardization of quality assurance measures.
• Participating in various learning experiences, which may include attending workshops and training sessions.
• Calibrating and troubleshooting equipment as required.

Mon-Fri 8.30am-5.30pm

Location: East

Responsibilities:

• To lead a team of AE / Technicians to carry out all the Test related activities for Server & Rack products for the production

• To support & implement PXE Server configuration for the products

• Perform & maintain the Server & Rack run-in test process

• Perform & maintain the burn-in & power test process

• To liaise with customer & HQ / factory on the test program implementation and maintenance

• To test and analyze all failures in the production products and work back with customer & HQ / factory for improvement

• Participate in the Kaizen activities

• To update the test program master list & tracking

• To prepare and update Working Instruction

• To provide training over W/I to production

• To support the NPI Process

• To support production on the mass run

• Participate in ISO activities (implementation & maintenance)

Requirements:-

• Min. Diploma in Engineering discipline with min 3 years relevant experience in Server / Rack/ Manufacturing environment

• Ability to work with the customer, HQ / factory, Peers / Subordinate and Superiors

• SAP & Linux knowledge

• Able to multi-task & work under pressure

• Good understanding of test methods and concepts

• Knowledge of programming and debugging skills

For quick reply, please contact me at +65 85878287

Registration Number: R21100938

EA Licence No: 22C1301 (Unisearch Services Pte Ltd)

Responsibilites

• Design, develop, and maintain robust data pipelines and architectures.
  Collaborate with cross-functional teams to integrate data from various sources.
• Implement and manage CI/CD processes to ensure smooth deployments.
• Optimize Snowflake database performance and ensure efficient data storage.
• Utilize Azure Data Factory and the MS Fabric stack for data integration and orchestration.
• Write and maintain detailed technical documentation for data processes and architecture.
• Monitor and troubleshoot data pipelines to ensure data integrity and quality.
• Stay current with industry trends and best practices in data engineering and integration.

Requirement

• Expertise in Snowflake database development.
• Proficient in Azure Data Factory and the MS Fabric stack.
• Experience with Continuous Integration / Continuous Deployment (CI/CD).
• Strong background in advanced data integration and engineering.
  Proven ability to write clear and comprehensive technical documentation.
• Experience with multiple cloud platforms, specifically Azure and AWS.
  Strong problem-solving skills and attention to detail.
• Excellent collaboration and communication skills.
  

Qualifications:

• Bachelor's degree in Computer Science, Engineering, or related field; Master’s preferred.
• Minimum 5 years of experience in a similar role.

COMPANY DESCRIPTION

We are one of the largest one-stop Underground Utilities Infrastructure companies based in Singapore. We provide Underground Utilities Infrastructure construction and maintenance, sewer pipeline rehabilitation, road and airfield construction and maintenance as well as asphalt pre-mix production and construction waste recycling.

RESPONSIBILITIES

• Developing in-depth understanding of project scope and particulars i.e. timeframes, financials, outcomes, plan and manage team goals, project schedules and new information.
• Communicate with clients to identify and define project requirements, scope and objectives, regularly schedule and attend meetings between stakeholders, clients, employees and the Project Manager.
• Getting necessary approval (NCE, LTA Approval, NPark and Special Approvals) for the site teams, and special approvals like GTP, MPA and LPB clearances and request for, TPOM Officers coordination for standing supervision.
• Maintain records and renew any expired approvals/permits that are required (C&G NCE, Telecom, GTP, LPB LOAs).SP Officers coordination regarding the following schedule of works (ROA Schedules, Reinstatement) for Distribution Projects.
• Coordinating with LTA and NPark officers regarding the ROA queries raised by authorities, and get approval on time.
• Providing support to project managers and operation team when requested.
• Participate in project design meetings and propose improvements if necessary, and sharing relevant documentation and reports with project teams.
• Communicate with clients to identify and define project requirements, scope and objectives.
• Plan and manage team goals, project schedules and new information.
• Adhere to budget by monitoring expenses and implementing cost-saving measures.
• Supervise current projects and coordinate all team members to keep workflow on track.
• Regularly schedule and attend meetings between stakeholders, clients, employees and the Project Manager.
• Direct project correspondences by preparing and reviewing project proposals, meeting minutes and emails.
• Providing support to project managers and operation team when requested.
• Being point of contact for various working groups.
• Manage project-related paperwork by ensuring all necessary materials are current, properly filed and stored.
• Perform other duties or tasks as assigned by immediate supervisor or HOD.

• Degree in Civil Engineering recognized by Singapore Professional Engineers Board (PEB)
• Minimum 3 year of experience in constructions or civil engineering
• Those with experience in underground utilities especially gas pipes will be advantageous
• Possess excellent interpersonal and communication skills
• Service-oriented client relationship and people
• Self-motivated and able to work independently
• Preferably possess a valid Class 3 license

• 6 days work week
• Working location: Sungei Kadut (with company transportation provided at Woodlands and Kranji MRT Station)

Other Benefits

• Provided company lunch bus
• Medical Teleconsult
• Portable Medical Benefit Scheme (PMBS) - additional monthly contribution direct to Medisave account
• Medical benefits (applicable for dental and company provider health screening)

Why Join Us

• Opportunity to work in a dynamic and fast-paced environment
• Engage in diverse tasks that keep each day unique and interesting
• Be part of a team that values communication, efficiency, and security
• Supportive work culture with opportunities for growth and development

Responsibilities

* Main: Understand and help plan/guide/implement the migration of reporting/analysis use-cases from Essbase cubes to other tools (Tableau etc)

* Secondary: Review/optimize/consolidate datasets needed by end-users to encourage reusability through standardization and optimized performance

Skills

* Extensive experience in Business/Finance Analysis and Business Intelligence concepts

* Strong hands-on experience in SQL and SQL/resource optimization

* Strong hands-on experience in Tableau datasource and dashboard development/optimizations.

Technical Responsibilities

• Undertake design document reviews and possess in depth knowledge of project specification, relevant international codes, industry standards and relevant Classification Rules and Regualtion
• Prepare in-service design concept and perform detailed design as required by project. Prepare and deliver structural design sketches and structural calculations report at project datelines and quality.
• Ensure effective communication and coordination with multi-disciplines team to obtain input for Discipline designs and to develop a crash free design.
• Prepare design concept for structural framing, grillage and fastening during in-transport and onsite condition and perform structural engineering for in-transportation and installation conditions for the unit
• Prepare procedures for loadout, transportation and installation operations
• Utilises STAAD PRO and SAP2000 software as well as company proprietary Microsoft Excel spreadsheets as required. Conversant with relevant International Codes of Practice as well as engineering and industry standards
• Adheres to and complies with engineering procedures and industrial standards/codes and provides constructive feedback for continuous improvement. Identifies potential applications for new processes and technologies to improve productivity and efficiency
• Ensures effective communication and interface between all disciplines for design and development
• Ensure project meets client requirements, industry standards and relevant Classification Rules and regulations
• Participates in internal audits and investigations as required
• Establishes and maintains effective working relationships internally. Engages with inter-discipline community and promotes networking and knowledge sharing
• Review all detailed drawings ensuring technical correctness, professional presentation and that fabrication and installation requirements are employed.
• Review vendor deliverables, checking for compliances with project specifications and providing comments as necessary.
• Provide technical support to fabrication queries

Job Requirements

• Bachelor’s or Master’s degree in Civil & Structural Engineering or equivalent engineering specialisation from an accredited university
• 5+ years professional engineering in the related field
• STAAD.PRO, SAP2000 familiarity. Knowledge in SACS is an advantage
• Familarity of industry standards, codes and/or Classification Society Rules
• Excellent technical communication (oral and written) skills with proven ability to present technical issues to design teams and project engineering teams
• Self-starter and be able to work with minimal supervision, make sound decisions, take independent action, analyze problems, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels
• High level of numerical accuracy and attention to detail
• Preferably to have some experience in Transportation and installation or naval architectural related design or Marine Warranty Survey (MWS)