About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You are responsible for identifying, assessing and advising on risks arising from the workplace health, environmental and/or work processes, recommending measures to eliminate or minimize and control the risks and implementing the measures.

Key Responsibilities

• Conduct job and environment hazard and risk assessments, perform workplace evaluations, and implement corrective and preventive actions
• Apply relevant licenses, conduct tests and provide necessary inspection reports on environment and safety to drive improvement
• Lead and continually review existing and new Fab processes and equipment for EHS compliance, including managing waste, air, water, chemicals, gas and others
• Manage semiconductor process safety, establish Environment, Health and Safety (EHS) culture, implement and enhance the EHS program for employees and contractors
• Perform regular and ad-hoc inspections. audits and supervise hazardous operations safely
• Lead and facilitate ERC (Emergency Response Committee) related activities such as factory emergency response, fire, gas leak and others
• Collaborate with relevant departments for ISO14001, ISO45001, ISO14064, and ISO50001 management systems certification and compliance
• Provide technical, regulatory and process guidance to address emerging EHS issues

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Engineering or Science background including Occupational Safety, Chemical Engineering or Chemistry, environmental science and emergency response or management
• Minimum of 3 years of experience in semiconductor, electronics manufacturing, or other chemically intensive manufacturing industries and regulatory compliance preferred.
• Possess industrial safety, environmental protection, and fire protection related certificates
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months

Key Skills and Attributes

• Strong analytical skills and able to work under pressure in a fast-paced environment
• Good interpersonal, leadership and communication skills to work effectively across functions and geographical teams with diverse background
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

Objectives:

· Supporting refurbishment projects within the Domestic Business Management Division.

· Support and execute business expansion plan.

· Overseeing engineering processes, ensuring technical standards are met

· Collaborating with cross-functional teams to deliver projects in a timely and cost-effective manner.

· To support refurbishment projects and business operations in the Singapore region.

· Ensure project quality, and act as a bridge between Japanese headquarters and local teams, fostering seamless communication and collaboration.

Job Responsibility:

1. Project Support:

- Plan, execute, and monitor refurbishment projects within the Capital Area.

- Assist in the execution of key projects, ensuring alignment with Japanese business standards and practices.

- Monitor project progress and report updates to stakeholders, ensure schedules effectively.

2. Technical Expertise:

- Provide technical input on refurbishment designs, materials, and processes.

- Conduct feasibility studies and risk assessments for refurbishment projects.

- Ensure adherence to industry standards, regulations, and safety protocols.

3. Collaboration and Communication:

- Work closely with internal teams, including procurement, operations, safety and quality assurance.

- Prepare and present progress reports, technical documents, and proposals in English and Japanese.

- Strong in Business Japanese communication and written skills to communicate with executives in Japan regional offices.

4. Administrative Duties:

- Handle documentation, reporting, and correspondence related to assigned projects.

- Coordinate meetings, schedules, and travel arrangements as necessary.

- Ensure all activities adhere to local regulations and company policies.

Requirements:

- A bachelor’s degree in business administration, Engineering, or a related field is typically required.

- Minimum of 3 years of experience in a business or engineering-related role.

- Strong communication and interpersonal skills.

- Ability to manage multiple tasks and projects effectively.

- Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint).

Job Description

1. Inspection for production and delivery of PC components, ensure that the works are as per project specification.
2. Proper management of materials, workmanship of work and work area.
3. Ensure workplace safety and enforce safety measures at all times.
4. Coordinate with inspectors and logistics for smooth flow of work.
5. Submission of daily, weekly and monthly reports.

Requirement

1. A diploma in Civil Engineering or its equivalent.
2. Minimum 2 years of related work experience.
3. Excellent written & verbal communication skills with Customers, Contractors and all level of staff.
4. Good organizational and time management skills.

Job Description

• Industry/ Organization Type: Manufacturer
• Position Title: Maintenance and Production Operator
• Working Location: West – Boon Lay (Nearby Jurong Shipyard)
• Working Hours: 5.5 days (Mon to Fri: 8AM – 5PM, Sat: 8AM - 12PM)
• Salary Package: Up to SGD2800 + OT + Travel Allowance + AWS + Performance bonus
• Duration: Permanent

Key Responsibilities

• Read and follow job orders
• Determine the required quantity to meet daily output
• Prepare and set up machines for production – clean, checking etc.
• Ensure to carry out machine operation and maintenance in good and safe working conditions
• Control and run the machine to the fullest extent
• Being able to identify any faults or problems in operations or maintenance of machines and troubleshoot arising issues
• Inspect the machine outputs for process and quality control
• Provide detailed reports and logs on the work done daily
• Keep up with safety requirements and maintain a safe work setting at all times
• Proposing improvements to the process or machines as needed
• Reporting safety hazards within the work environment
• Debagging activities and Packing products in 25kg HL and jumbo bags

APPLY NOW!!!

• Min. N Level
• Min. 2 years of working experience in the manufacturing industry or relevant field
• Able to do repetitive tasks; detail-oriented; understanding of industry and safety standards
• Possess basic knowledge of PC, general maintenance, and repair tasks
• Comfortable to work OT
• Able to work in a dusty environment
• On-Job training provided

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71458 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

• Company bus pickup from Ang Mo Kio, Jurong East, Boon Lay
• CNC Manufacturing
• MNC (Good remuneration)

1. Assistant Production Engineer (Mechanical)

Job Responsibilities:

• Perform basic and advanced machine assembly works
• Develop mechanical testing jigs & fixtures and perform testing and validation of machines
• Lead the production team to strictly adhere to production schedule and same time improving the manufacturing process to improve quality, cost, and productivity
• Creates, implements, and monitors KPI indicators on product quality and section capability
• Provide shop floor feedback to Production Engineering and D&D Department
• Assist the Production Manager to provide quality, cost effective and efficient support for launching of new machine models
• Perform machine mechanical setting and inspection checks according to YS standard
• Able to troubleshoot and resolve machine any kind of mechanical non conformance
• Perform machine final mechanical inspection and adjustments for any defects to maintain high level of quality
• Prepare reports on productivity, quality, claims, etc
• Work with engineering and other departments to improve assembly processes
• Monitor the serviceability of measuring instruments or jigs and fixtures and reporting to Supervisor or Manager any non-compliance condition
• Maintain accurate records of inspection result at each electrical process

Job Requirements:

• Bachelor Degree or Min Diploma (Mechanical) required
• 0-3 years working in a machine assembly environment
• A good track record of supporting the department achieving KPI
• Strong understanding of 5S and HSE knowledge
• Able to work effectively in a fast and ever-changing stressful environment
• Maintain good Quality standards, 5S and safety discipline
• Well verse in Microsoft office (Excel, Words, PowerPoint and Outlook)
• Knowledge of drawing software (SolidWorks, Unigraphic, etc) is added advantage

2. Assistant Production Engineer (Electrical)

Job Responsibilities:

• Perform basic and advanced machine electrical wiring works
• Develop electrical testing jigs and perform testing and validation of machines
• Lead the production team to strictly adhere to production schedule and same time improving the manufacturing process to improve quality, cost, and productivity.
• Creates, implements, and monitors KPI indicators on product quality and section capability
• Provide shop floor feedback to Production Engineering and D&D Department
• Assist the Production Manager to provide quality, cost effective and efficient support for launching of new machine models
• Perform machine pre & post machine power ON inspection checks, machine parameter settings, testing and inspection according to standard
• Able to troubleshoot and resolve machine electrical non conformance
• Perform machine final electrical inspection and adjustments for any defects to maintain high level of quality
• Prepare reports on productivity, quality, claims, etc
• Work with engineering and other departments to improve assembly processes
• Monitor the serviceability of measuring electrical instruments or jigs and fixtures and reporting to Supervisor or Manager any non-compliance condition
• Maintain accurate records of inspection result at each electrical process

Job Requirements:

• Bachelor Degree or Min Diploma (Electrical) required
• 0-3years working in a machine assembly environment
• A good track record of supporting the department achieving KPI
• Strong understanding of 5S and HSE knowledge
• Able to work effectively in a fast and ever-changing stressful environment
• Maintain good Quality standards, 5S and safety discipline
• Well verse in Microsoft office (Excel, Words, Powerpoint and Outlook)
• Knowledge of drawing software(Solidworks, Unigraphic, etc) is added advantage

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Ding Xin Er
EA Personnel Reg No: R22106669

• Company bus pickup from Ang Mo Kio, Jurong East, Boon Lay
• CNC Manufacturing
• MNC (Good remuneration)

1. Assistant Production Engineer (Mechanical)

Job Responsibilities:

• Perform basic and advanced machine assembly works
• Develop mechanical testing jigs & fixtures and perform testing and validation of machines
• Lead the production team to strictly adhere to production schedule and same time improving the manufacturing process to improve quality, cost, and productivity
• Creates, implements, and monitors KPI indicators on product quality and section capability
• Provide shop floor feedback to Production Engineering and D&D Department
• Assist the Production Manager to provide quality, cost effective and efficient support for launching of new machine models
• Perform machine mechanical setting and inspection checks according to YS standard
• Able to troubleshoot and resolve machine any kind of mechanical non conformance
• Perform machine final mechanical inspection and adjustments for any defects to maintain high level of quality
• Prepare reports on productivity, quality, claims, etc
• Work with engineering and other departments to improve assembly processes
• Monitor the serviceability of measuring instruments or jigs and fixtures and reporting to Supervisor or Manager any non-compliance condition
• Maintain accurate records of inspection result at each electrical process

Job Requirements:

• Bachelor Degree or Min Diploma (Mechanical) required
• 0-3 years working in a machine assembly environment
• A good track record of supporting the department achieving KPI
• Strong understanding of 5S and HSE knowledge
• Able to work effectively in a fast and ever-changing stressful environment
• Maintain good Quality standards, 5S and safety discipline
• Well verse in Microsoft office (Excel, Words, PowerPoint and Outlook)
• Knowledge of drawing software (SolidWorks, Unigraphic, etc) is added advantage

2. Assistant Production Engineer (Electrical)

Job Responsibilities:

• Perform basic and advanced machine electrical wiring works
• Develop electrical testing jigs and perform testing and validation of machines
• Lead the production team to strictly adhere to production schedule and same time improving the manufacturing process to improve quality, cost, and productivity.
• Creates, implements, and monitors KPI indicators on product quality and section capability
• Provide shop floor feedback to Production Engineering and D&D Department
• Assist the Production Manager to provide quality, cost effective and efficient support for launching of new machine models
• Perform machine pre & post machine power ON inspection checks, machine parameter settings, testing and inspection according to standard
• Able to troubleshoot and resolve machine electrical non conformance
• Perform machine final electrical inspection and adjustments for any defects to maintain high level of quality
• Prepare reports on productivity, quality, claims, etc
• Work with engineering and other departments to improve assembly processes
• Monitor the serviceability of measuring electrical instruments or jigs and fixtures and reporting to Supervisor or Manager any non-compliance condition
• Maintain accurate records of inspection result at each electrical process

Job Requirements:

• Bachelor Degree or Min Diploma (Electrical) required
• 0-3years working in a machine assembly environment
• A good track record of supporting the department achieving KPI
• Strong understanding of 5S and HSE knowledge
• Able to work effectively in a fast and ever-changing stressful environment
• Maintain good Quality standards, 5S and safety discipline
• Well verse in Microsoft office (Excel, Words, Powerpoint and Outlook)
• Knowledge of drawing software(Solidworks, Unigraphic, etc) is added advantage

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Ding Xin Er
EA Personnel Reg No: R22106669

Job Description

• Industry/ Organization Type: Manufacturing/ Semiconductor
• Position Title: Production Operator
• Working Location: Woodlands (walking distance from MRT)
• Working Hours: 5 Days, Mon - Fri (11.30pm – 8.30am)
• Salary Package: Basic Salary + Shift Allowance + OT + AWS
• Duration: Permanent

Key Responsibilities

• Operate and maintain manufacturing equipment.
• Monitor production process and perform routine quality checks.
• Troubleshoot equipment issues and perform minor repairs.
• Adhere to cleanroom standards and safety protocols.
• Record the production data.
• Other ad hoc tasks as assigned.

APPLY NOW!!!

• Minimum GCE N-Level.
• Willing to commit night shift work hours.
• Candidates without experience are welcome to apply, training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #65911 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Highlights
Career progression opportunities.

Guidance by Experience Professional Engineers and company Directors to develop holistic competencies.

Involve in company operational and management processes.

Job Description

• Civil & Structural Engineering Design.
• Fire safety, Pollution Control and Singapore Statutory requirements design.
• Project execution & management.
• Company level operational processes and management.

Responsibilities

• Civil & structural and other engineering design.
• Manage Engineering team.
• Manage or support design teams.
• Project co-ordination or management.
• Involve in company level operational and management processes.
• Assist Company Directors in the performance of their duties.

Job Requirements

• Registered Singapore Professional Engineer or
• Civil Engineering Degree that is registerable as a Singapore Professional Engineer preferred.
• Candidates with BIM knowledge/experiences will be an advantage.

Additional Requirements

• Good knowledge of engineering design and project management.
• Effective communicator and motivated.
• Have broad vision and good sense of reality.

Responsibilities

• Assist/support Topsides Engineering Project Manager in managing engineering work including engineering deliverables, man-hour and schedule control, mainly in multi-disciplinary topsides design related activities and to ensure work performed on the project is in accordance with company quality, systems and safety requirements;
• Understand the contract and scope of work for topsides with sub-contractor;
• Prepares key project documentation as per project specification requirements;
• Manages project topsides related drawings and controls technical documentation across disciplines;
• Prepares schedule, pre-planning and resource forecasting for engineering and other technical activities relating to the project topsides design, ensuring all activities are kept within the project budget;
• Assist topsides EPM in organizing regular inter-discipline review meetings and interface checks.
• Participates in project meeting, reports on the project status and attends to basic technical queries and issues including reviewing the performance of vendors/ subcontractors in the project
• Liaises with customers, topsides design sub-contractor, vendors, consultants and cross-functional team to coordinate project plan and handles technical issues in order to meet the project schedule
• Assist topsides EPM to ensure Design Reviews conducted with appropriate attendees and manage the action register to monitor the close-out of identified action items.
• Support topsides EPM in identifying dependencies and obtaining alignment with project stakeholders to ensure safety and quality are not sacrificed in the effort to meet the project schedule.
• Collates project documentation and database from the project for submission and retention, as required and compiles the records from current and past projects as lessons learnt
• Review & comment the activities & deliverables list from each discipline, mainly the topsides design related activities & deliverables;
• Lead & co-ordinate between Hull’s Team, topside lead designers from every discipline, external design house (when applicable) & client (when applicable) to define the boundary for each module and boundary between topside & hull;
• Co-ordinate between discipline to utilize the shared license based-on work priority;
• Monitor & control the topsides design manhours based-on the available budget allocated by commercial team or as defined by discipline Lead Designer;
• Record & follow-up all the topsides design pending issues / problems highlighted by Lead Designers from every discipline, and report to Topsides Engineering Manager;
• Expedite the information required by each discipline prior to start & complete the topsides design works;
• Monitor 3D model clashing issues with other discipline;
• Prepare Weekly Report related to Overall topsides design Progress, Area of Concern, Pending Items, Clashes Register, Interface Register, Down Time Register, Available Resources against Planned Resources, Manhour Usage against Planned Manhour, etc & Action Plan & submit to Topsides Engineering Manager/Engineering Project Manager & GM;
• Lead topsides design review activities either internally with other discipline or externally with other parties (include client);
• Initiate, organize, participate, record & file the minutes of meeting with external parties (include client) for topsides design related activities;
• Prepare, update & monitor the topsides design Punch List & Hold List on weekly basis, especially related to external parties (include client);
• Support Project Planner in preparation of monthly or weekly report to client related to topsides design progress & status;
• Support Topsides Engineering Manager/Engineering Project Manager & commercial team for VO related to topsides design;
• Responsible for ensuring that all topsides design activities meet work scope & comply with Project Quality Plan.
• Liaises with Construction & Commissioning Team to ensure topsides design activities are in-line with Area or System Completion Priority.
• Understand and monitor all interfaces with Class Society (if topside is classed) / other regulatory bodies and Clients to ensure requirements are properly addressed and relevant documents are reviewed timely.
• Assist topsides EPM in preparing project close-out, including as-built documentation and engineering close-out reports.
• Tack and coordinate changes with Discipline Leads ensuring team members follow the management of change process (MOC); ensure recorded changes are followed through.
• Proactively identify and monitor areas likely to change to reduce the “surprise” element, added costs and delays to project.
• Coordinate the interfaces with subcontractors and third party consultants and ensure all changes are captured through MOC process

Requirements

• Minimum Bachelor Degree in Engineering;
• Minzmum 10 years working experience in offshore oil and gas project managing topsides design works;
• Able to liaise with internal and external parties;
• Able to comprehend the strategies, work methods, processes and systems in overall project execution and engineering execution of topsides design;
• Highly competent interpersonal and influencing skills to tactfully and diplomatically manage ambiguity, conflict and uncertainty in a culturally diverse environment.
• High awareness of safe working practices associated with design, construction, mechanical completion, pre-commissioning and commissioning of an oil and gas facilities.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

We are seeking an Application Production Support professional to manage support activities for Olympic (Core Banking) and related systems. The role involves handling incidents, service requests, end-user queries, and maintaining system reliability.

Responsibilities:

• Provide L1/L2 application support to end-users.
• Escalate unresolved tickets to appropriate teams following established procedures.
• Deliver excellent customer service to build trust and positive relationships with users.
• Ensure adherence to Service Level Objectives (SLOs) and roadmap targets.
• Maintain and update knowledge articles.
• Support disaster recovery (DR), business continuity (BCP) exercises, and patching cycles.

Ideal candidate:

• Basic troubleshooting skills on AS400 and Unix.
• Strong knowledge of SQL queries and data analysis.
• Familiarity with production support tools like ServiceNow and JIRA is a plus.
• Strong verbal and written communication skills, with the ability to engage with a diverse group of stakeholders.
• Proactive, positive attitude with a team-oriented mindset.
• 7+ years of experience in IT production L1/L2 support within the banking industry.
• Knowledge and experience with banking products such as investment instruments, corporate actions, loans, deposits, remittances, and foreign exchange.
• Experience with Olympic banking system is a strong advantage.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a MECHANICAL ENGINEER/ SENIOR ENGINEER to be part of our FACILITIES DEPARTMENT diverse team of talent. You will be responsible for HVAC systems, Clean Room, Building services and maintenance.

What you will be working on:

• To provide facilities support pertaining to Clean Room, Chillers and HVAC systems, Environmental Protection Systems, Process Utilities Supply Systems, Building Services and Maintenance, and other miscellaneous mechanical and facilities systems to wafer fabrication so as to ensure continuous supply of utilities and related facilities at the required performance level or specifications
• Formulate, implement, review and improve preventive and predictive maintenance programs for systems in charge so as to ensure that the systems function as intended at all times
• Carry out repair and troubleshooting of systems in order to restore systems to their operating conditions in the shortest possible time. Carry out root cause analysis and implement action plans to prevent recurrence
• Able to formulate effective reporting and tracking systems for monitoring of system performance and capacity usage. Recommend and implement improvement/enhancement projects where appropriate.
• Formulate, implement, review and improve operating procedures so as to ensure optimum operation of systems
• Monitor and review utility consumptions and work with users to implement projects to reduce the consumption where possible
• Knowledge of all relevant standards, legislations, codes of practice etc and ensure their compliance
• Provide guidance and training on the systems in charge to fellow colleagues so as ensure adequate working knowledge and system backup
• Ensure plant histories, drawings, data and other appropriate documentations are being generated and properly filed for future reference and review.
• Evaluate and recommend appropriate spares, consumables and other resources necessary for the day-to-day operation of the systems.
• Conduct project supervisions.

More About You:

• Master / Degree in Science, Mechanical Engineering, Building or equivalent. Preferred candidate with SCEM certification.
• 5 years of relevant working experience in semiconductor, pharmaceutical or petrochemical industry. Hands-on experience in day to day operation and maintenance essential.
• Experienced in managing cleanroom (Class 100 environment) systems
• Person shall act as SME for ACMV system. Person must have sound knowledge of operation and maintenance of Clean room areas and ACMV system
• Provide building services and maintenance, including building facilities repair and upgrading, housekeeping, landscaping and pest control.
• Knowledge of maintenance principles and good engineering practices.

Job Highlights:

• Working with world's leading company in SMT / PCB / semiconductor industries.
• Attractive salary package: AWS, variable bonuses, comprehensive medical coverage.
• Career growth opportunities with trainings provided.

About the Company:
Our client is a global technology company and a market leader that develops and provides leading-edge solutions in surface mount technology, equipment and materials for the semiconductor assembly and packaging industries.

Role Overview:
Join our client's dynamic team as a Software Engineer or Senior Software Engineer, where you will develop and manage cutting-edge solutions for SPI, factory line systems, and associated modules. The role demands technical expertise, creativity, and a strong focus on quality to deliver scalable and maintainable software solutions. Senior candidates will additionally lead complex design tasks, mentor junior engineers, and drive innovation in a competitive landscape.

Key Responsibilities:

• Design, develop, and maintain software solutions for SPI and factory line systems, focusing on quality and scalability.
• Provide effective solutions for production units and address customer requirements with a balance between functionality and time-to-market.
• Solve complex engineering problems using innovative approaches and technical analysis.
• Conduct technical reviews and provide evidence of appropriate solutions to customers.
• Stay updated on industry trends through continual professional development.
• Guide junior team members (for Senior roles) and support their growth.
• Perform any additional ad-hoc duties as assigned.

Requirements:

• Bachelor/Master Degree in Engineering or a related discipline.
• A minimum of 3–5 years of relevant working experience, depending on the role.
• Strong experience in software design, analysis, and validation of engineering requirements.
• Proficient in C++, UML, and the appropriate usage of design patterns.
• Familiarity with Source Control Systems, Visual Studio, and Software Development Lifecycle.
• Knowledge and experience in hardware systems, real-time control systems, Unit Testing, Dependency Injection, and WPF are advantageous.
• Demonstrated ability to balance functional design with time-to-market considerations while maintaining scalability and maintainability.
• Senior candidates should have experience mentoring junior engineers and leading complex software design tasks.

How to Apply:

Interested candidates, please submit your updated resume by using Apply button

**We regret to inform that only shortlisted candidates will be informed.**

Sarah Sevilla

Registration Number: R22107553

EA License No: 18C9027

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Senior Engineer/Engineer to be part of our Product Engineering diverse team of talent. You will be responsible for yield, quality and reliability issues of devices.

What you will be working on:

• Resolve yield, quality and reliability issues in the qualification of new devices
• Perform pre-tapeout risk assessment and communication with Business line/ Fab on the necessary actions to eliminate/ minimize risk
• Conduct product yield analysis to identify root causes of wafer sort and final test failures
• Work with Customers and Account Managers to maximize die output
• Establish product low yield criteria and dispositioning
• Provide product engineering support to failure analysis lab for electrical fault isolation
• Provide product engineering support to reliability lab to understand and resolve reliability failures
• Compliance to safety, discipline and housekeeping rules
• Support cost reduction through yield improvement and resolving excursion
• Participate in continuous yield and productivity improvement projects

More About You:

• Bachelor's Degree in Engineering (Electrical/Electronic) or equivalent
• 2 years of relevant product engineering experiences in front-end wafer fab environment or
• In depth knowledge of semiconductor device physics, electrical & electronics engineering fundamentals & wafer fabrication processes
• Strong analytical and problem solving skills
• Good communication and interpersonal skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Engineer/ Senior Engineer to be part of our Photo Process department diverse team of talent. You will be responsible to sustain and improve all metrology tools and recipe indices to meet operations goals

What you will be working on:

• Optimize process capability to meet operation needs
• Perform Shift duties to support production
• Implement projects to upkeep process capabilities and reliabilities
• Troubleshoot process issues, establish Best known methods for future reference.
• Monitor and control process performance indices such as Cpk
• Work as a team with both equipment and manufacturing Engineers to meet module objectives
• Start-up new equipment processes which involves process characterization and development
• Establish and maintain a good audit system for both internal and QA audit on process documentation.
• Troubleshoot out-of-control situations and decide on the lot disposition in an out-of-spec situation.

More About You:

• Bachelor Degree in Engineering, Science or equivalent
• 1-3 years experience in semiconductor manufacturing environment. Fresh graduates with keen interest to develop a career in semiconductor manufacturing environment are welcome to apply.
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes.
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Posses logical thinking skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

• MNC Company
• Basic $4500 - $5500 + Shift Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Company Transport Provided)

Job Responsibilities:

• Support the Production Manager and Production Superintendent in process analysis, troubleshooting and optimization of plant operations.
• Responsible for all aspects of shift operations and manage shift team manpower and administration.
• Conducts daily shift meetings and assign duties to the shift team.
• Making emergency operating decisions.
• Leads Emergency Response Team as Site Incident Commander.
• Provide guidance to shift team for effective and safe operation.
• Ensure that periodic inspections are carried out to verify the smooth operation of all process equipment. Work requests are to be raised to rectify equipment faults if necessary.
• Reviewing DCS conditions/trends, analytical results, area logbooks and reading sheets, routine inspections of the process areas for equipment problems and housekeeping and having process technicians take appropriate corrective action.
• Take corrective action to control and rectify deviations in process parameters in order that finished goods are produced within specifications.
• Conduct on-job training and cross-training for technicians under their charge.
• Co-ordinate and control the receipt and delivery of chemicals and finished goods in the Plant.
• Ensure that non-conforming products and recycled materials are properly handed and treated in accordance to established procedures.
• Participate and lend support in project management when required.
• Implementation of cost reduction ideas for utilities and waste streams
• Ensure compliance with regulatory, company, and departmental Safety and Environmental guidelines, policies, and procedures.
• Prepare equipment for maintenance and commissioning of equipment.
• Work with Maintenance Department on Transition and shutdown maintenance planning

Requirements:

• At least 10 years working experience in a petrochemical industry.
• Diploma in a relevant discipline.
• Experience in leading people in a supervision role.
• Good knowledge and application of all safety rules and safety processes required in a chemical plant.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Working hours: 5-days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong East MRT)
• Salary Range: $4500 - $5500

Position Summary:

The Shift Supervisor is responsible for monitoring and managing the production process of the EVAL Manufacturing site, which will be launched in the second half of 2026, and makes any necessary process changes to maintain the production safely and stably. The Shift Supervisors are responsible for the efficient operation of the EVAL Plant in accordance with established procedures and work instructions. Major tasks include managing direct reports on shift, plant performance monitoring, feedback and troubleshoot abnormalities, conduct and follow up of individual training and development plans of his people. The Shift Supervisor reports to the Production Day Superintendent. Until the startup of EVAL production line, training and learning opportunities of EVAL production technology are provided by experienced members in company. The Shift Supervisor is responsible for training and leading the new technicians to achieve safe and stable commissioning and startup of the new EVAL plant.

Responsibilities:

• Support the Production Manager and Production Superintendent in process analysis, troubleshooting and optimization of plant operations.
• Responsible for all aspects of shift operations and manage shift team manpower and administration.
• Conducts daily shift meetings and assign duties to the shift team.
• Making emergency operating decisions.
• Leads Emergency Response Team as Site Incident Commander.
• Provide guidance to shift team for effective and safe operation.
• Ensure that periodic inspections are carried out to verify the smooth operation of all process equipment. Work requests are to be raised to rectify equipment faults if necessary.
• Reviewing DCS conditions/trends, analytical results, area logbooks and reading sheets, routine inspections of the process areas for equipment problems and housekeeping and having process technicians take appropriate corrective action.
• Take corrective action to control and rectify deviations in process parameters in order that finished goods are produced within specifications.
• Conduct on-job training and cross-training for technicians under their charge.
• Co-ordinate and control the receipt and delivery of chemicals and finished goods in the Plant.
• Ensure that non-conforming products and recycled materials are properly handed and treated in accordance to established procedures.
• Participate and lend support in project management when required.
• Implementation of cost reduction ideas for utilities and waste streams
• Ensure compliance with regulatory, company, and departmental Safety and Environmental guidelines, policies, and procedures.
• Prepare equipment for maintenance and commissioning of equipment.
• Work with Maintenance Department on Transition and shutdown maintenance planning

Requirements:

• At least 10 years working experience in a petrochemical industry.
• Diploma in a relevant discipline.
• Experience in leading people in a supervision role.
• Good knowledge and application of all safety rules and safety processes required in a chemical plant.

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Responsibilities

• Manage manufacturing operations, to ensure quality, production reliability, equipment maintenance and cost performance to meet customer requirements.
• Schedule, execute, and drive production activities and throughput according to production and delivery plan.
• Support development of new products in terms of qualification, building BOM, and drafting handling procedures, to transfer of process.
• Analyze and investigate customer complaint, to propose and lead implementation of improvement actions.
• Facilitate production team to propose and implement projects & programs aiming to improve productivity/efficiency in the areas of automation, digitalization, and AI.
• To build, train and lead a strong production team, lead to plan, execute Annual Training Plan for the manufacturing team.
• Propose and draw plans to support company and departmental KPIs, review KPIs result regularly with team and propose improvement actions whereby needed.
• Take lead in the continuous cost improvement/reduction programs through critical review of Production process. Seek yield improvement and output enhancement.
• Establish failure analysis methods & techniques. Analyze data and carries out manufacturability studies; suggest technical solutions/applications/latest manufacturing techniques.
• Responsible for the training, implementation and maintenance of Best Practices and Certifications/Standards.
• Participate and support any company’s business development/expansion strategies & policies implementation that relates to production and maintenance areas.
• Support site in obtaining and maintaining ISO14001, ISO9001, CQM and Common Criteria certifications.
• Comply with all Quality, Environmental, Health, Safety and Security policies and procedures of the Company.

Requirements

• Degree in Mechanical / Electrical & Electronic/ Mechatronics Engineering.
• 6 to 8 years’ experience as a Production Manager or Assistant Production Manager.
• Experienced in the IC chip module mass production/semiconductor OSAT/backend semiconductor manufacturing.
• Working knowledge of die-attach, wire-bonding, encapsulation, chip module testing process and equipment.
• Have managed a team of 100 - 150 people in a mass production environment.
• Knowledge in ISO 9001, ISO 14001, QEMS, and RBA is advantageous.
• Strong leadership and delegation skills with practical and analytical approach to problem solving.

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

Working Hours

First 2 months: Mon - Fri: 830am - 530pm

Subsequently on shift basis

AM Shift: 7am – 3.30pm

PM Shift: 2.30pm – 11pm

(Alternate weeks, 1 week AM the following week is PM)

Responsibilities:

• Qualify for and perform routine validated test methodologies on finished products, special projects or specified testing as directed in accordance to Standard Operating Procedures (SOPs)
• Assist to mix in raw ingradients to drums for machine mixing
• Load drums onto trolley for transporting
• Conduct all assigned work in compliance with our organization’s safety and quality requirements
• Get direction from Team Leader on work assignments
• Replenish and track inventory
• Maintain equipment records
• Perform daily housekeeping and routine basic equipment maintenance
• Communicate immediately any product testing deviation, failures/issues, or any other laboratory anomalies directly to Team Leader

Requirements:

• NITEC/Higher NITEC in any discipline
• Preferably in Chemical Process Technology
• Prior Internship / Experience in similar industry or role is an added advantage!
• Okay with carry loads up to 20kg if needed
• No related exp needed, training provided!
• Able to commit min 6mths
  

Interested applicants, please email your updated CV to [email protected] or WA 97527630 for more information.

We regret to inform that only shortlisted candidates will be contacted.

EA Personnel No: R23116144

EA Personnel Name: Lim Ruo Yi, Rachel

Company Registration Number: Recruit Express Pte Ltd (99C4599)

Responsibilities:

· Assist the project manager with on and off site meeting pertaining to the technical issues

· Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities

· Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project

· Proven problem solving and achievements work progress according to the work schedule

· Site supervision and able to coordinate well with sub-contractors, RE and RTOResponsibilities:

· Assist the project manager with on and off site meeting pertaining to the technical issues

· Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities

· Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project

· Proven problem solving and achievements work progress according to the work schedule

· Site supervision and able to coordinate well with sub-contractors, RE and RTO

Requirements:

· Degree in Civil/Structural Engineering (recognized by Singapore PE Board)

· Minimum 5 years’ of precast experience in commercial and condo building projects

Job Responsibilities:

• Implement QA plan, review, and revision for company level.

• Report on quality related matters to the QA/QC Manager and/or immediate superior, including preparation of monthly summary To create, prepare and implement the QA/QC plan and any associated and relevant directives and instructions needed to support To develop and manage the quality control and quality assurance procedures and ensure compliance.

• To prepare Inspection and Test Plan (ITP) and Inspection Reports Maintain the ISO and related certifications for company level.

• To perform needed tests on site to ensure works are done according to the contract specifications. Preparation of document submissions for client approval.

• Attend meetings and liaise with the client to ensure that quality requirements are being followed at all times.

• Maintain document record master list pertaining to equipment and monitor on the calibration status. Coordinate and make arrangements for equipment calibration when due.

• Compile and receive relevant material certificates and other required certificates and test report from vendors/suppliers. Coordinate with relevant testing laboratories for testing and witnessing.

• Compile and maintain quality records e.g. Request for Inspection (RFI) and verify as necessary. Coordinate on-site quality assurance and control activities.

• To conduct independent Quality Assurance check on and off site.

• Report non-conformities to the QA/QC Manager and/or Project Manager, perform analysis, identify root cause and propose corrective actions.

• Maintain and control QA/QC practices on daily basis with regular checks and inspections ensuring correct operation and implementation of procedures.

• Advise and assist the project team members on QA/QC matters. Assist in the development of internal QA/QC checklists.

• Implement and enforce Quality Control Plan.

• Verification and checks on raw/incoming materials and/or FG. Documents for non-conforming works and corrective action.

• Identify and assess any foreseeable risk arising from workplace or work processes, minimize environmental impact associated with the manufacturing / assembly activities.

• Perform other duties as and when assigned/instructed by immediate superior or higher management.

Job Requirements:

• Minimum Qualification: Diploma in Mechanical/Electrical or Marine Engineering Discipline Minimum 1-2 years of experience in Marine, Oil & Gas Industry

• Welding Certificate

• Good understanding of Marine/Offshore industry practices and standards.

• Know-how in one or more of these areas GD&T, NDT, welding, steel fabrication, material casting, and machining technology will be preferred.

• Familiar with ISO 9001 requirements & different marine classification societies' standards and requirements will be an added good knowledge of QMS and ability to implement, conduct checks and audit and upkeeping of documents etc.

• Project Management Skills

• A team player with good interpersonal and communication skills, attention to details, meticulous and independent. Good organizational, multitasking, prioritization, and effective time management skills.

• Ability to think critically and resolve problems/issues. Positive attitude, proactive and self-initiated.

• Ability to multi-task in a fast paced and dynamic environment

• Job Benefits

• · Positive and closely knitted working environment

• · Group Hospital Surgical Insurance/ Group Personal Accident Insurance

• · Annual leaves starting with 14 days and up to 21 days

Working Location:

15 Kwong Min Road S(628718)

Shortlisted candidate will be notified

Job Description

• Plan and monitor Mechanical section on the manpower, equipment and resources
• Prepare construction specification in coordination with vendors for critical items and finalize installation procedures
• Prepare method of statements for Mechanical document submission on project basis
• MOS preparation and JSA arrangement for lifting and other site activities
• Study scope of work and documents concerning mechanical items / equipment
• Raise purchase requisition for the project required consumable and hardware items & sub-contractor works
• Liaise with Clients representatives, classification society surveyors and others to comply with inspection requirements
• Initiate and promote safety programs along with safety department like monthly safety committee meetings, JSA meetings, RA meetings etc
• Instruct foreman / subcontractors on a day-to-day basis for work progress
• Monitor progress; instruct supervisor and foreman on safety and quality matters
• Maintain the file copy of all latest revision drawings, approved procedures, clients Site Instruction, Project specification, JCS/JCF and prepare timesheet Form-A & Form-AA, Raised AFI and Client signed reports for Material receiving inspection and Mechanical works for internal and external audits
• Resolve any technical problems or issues faced at the work site
• Keep records of all works done
• Liaise and coordinate with other departments on project issues

Jobs Requirement

• Degree/Diploma in Mechanical Engineering or equivalent
• Minimum 8 years of experience in Marine Shipyard operations
• Able to perform HVAC activities encompass a wide range of tasks related to the installation, maintenance, repair, and optimization of HVAC systems
• Highly motivated individuals with good organizational skills and leadership skills
• Able to adapt new work environment and able to lead independently
• Active and positive minded
• Proficient in MS Office applications (ie. Microsoft Excel)

• Metal Stamping Company
• Basic salary up to $5000
• Full Company Benefit
• 5 days 8.30am – 5.30pm
• Company transport from MRT Pioneer

Job Responsibilities:

• Provide technical tooling support to Tool & Die (T&D) and production teams, ensuring tools meet quality and efficiency requirements.
• Collaborate with the Design department and toolmakers to improve tooling performance and implement continuous improvement initiatives.
• Lead the tooling team in problem-solving, root cause analysis, and skill development through training and guidance.
• Coordinate with production and planning teams to prioritize schedules and ensure tool readiness for production needs.
• Manage tooling modifications, resource allocation, and support the Principal Engineer in their absence.

Requirements

• Preferably Diploma in Precision Engineering or a related field.
• Technical qualifications in Tool & Die Making will be advantageous.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected] for confidential discussion.

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R24124448 | Nana Yeoh Li Xuan

Main Responsibilities

• Research, design, and develop computer and network software or specialised utility programs. Analyse user needs and develop software solutions, applying principles and techniques of computer science, engineering, and mathematical analysis.
• Identify and resolve issues which have organisation wide and long-term impact. Identify security risks, creates requirements to capture security issues, and performs initial threat modelling to ensure coding standards meets security requirements
• Develop and maintain the software configuration management plan and oversees the building, verification and implementation of software releases. Provide guidance and technical support to the quality testing teams.
• Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures.
• Collaborate with cross functional teams (business analysts/ support teams… ) to ensure smooth integration of new features and updates and troubleshoot, debug, and resolve application-related issues
• Stay updated on industry trends, emerging technologies, and regulatory changes relevant to capital markets.
• Participate to proof of concept for new technology R&D
• Contribute to continuous improvement and automation by leverage your programming skills to create custom tools and scripts that automate repetitive tasks and reduce manual effort.
• Develop scripts and automation tools using Python, shell scripting, and other basic programming languages to streamline processes and improve efficiency
• Engage and support others in the team, readily put forth his ideas in a clear and compelling manner.
• The candidate should have analytical and problem solving skills, a pro-active mind-set in security, proven ability to work individually under pressure. Team player with good interpersonal skills. Very good communication skills and keen to work with business users.
• Collaborate with computer hardware engineers (CAGIP and ITS) to integrate infrastructure constraint (whether in-premise or cloud) hardware and software systems aligned with capacity, develop specifications and performance requirements.

Qualifications and Profile

• Candidates should have 7 years experience in relevant activities.
• Experience in supporting capital market applications and trading systems, ideally within the dynamic landscape of Market Risk/Front Office operations with a commendable grasp of financial products (Treasury, FX, Credit, IRD, Bonds, RSF etc.)
• Expertise in Calypso Back office functionality with hands-on experience in customizations of different Calypso modules:

- Custom Remote Services

- Engines

- Events

- Filters

- Reporting Framework

- ScheduledTask

- Message / Swift messages

- Transfers

- Settlement Delivery Instructions

- Accounting

- Pricers

- Workflows

- Reconciliation functionalities

• In depth knowledge of Confirmations, Settlement, Position and Accounting modules.
• Understanding of financial assets (FX, Treasury products, repos, bonds, SLB, issuances) and trade lifecycle.
• Experience with regulatory reporting HRF, NORIA, MMSR.

Next Step

• Prepare your updated resume and expected package.
• Simply click on 'Apply here' or email to [email protected] to drop your resume
• All shortlisted candidates will be contacted.

Tamanna Bilandi

EA Licence No. 91C2918

Personnel Registration No. R2096241

PROJECT ENGINEER (HVAC | Energy | Commissioning | BMS Control)

NV5, Singapore Office

What We Offer at NV5

NV5 Net Zero (a subsidiary of NV5, NASDAQ listed, stock code: NVEE) is a leading business advisory specialist in Energy Management. Riding on our continued success of the business, we are looking for new talents to join our young, inclusive and diverse team on a full-time basis in Singapore. The successful candidates will have a strong interest in energy and evidence-based commissioning to join force in tackling the most pressing global challenges.

At NV5 we are committed in creating an inclusive and diverse working culture. We offer you a platform to learn, grow, flourish and take lead to help the global business transition to a low carbon economy. We embrace your ideas and support you to achieve your ambitions while also helping our clients achieving theirs.

At NV5 our fundamental values in and out of our office are:

· Trustworthy – To trust ourselves, each other and our clients

· Innovative and challenging – To be best in class

· Communicating – Have the conversation you don’t need to have

· United – One Team One Family

· Fun – Most of the time you spent awake is at work, you want this to be fun

Join us and have a lot of fun in this unique journey of growth.

Highlights of benefits

· Competitive remuneration package for suitable candidates

· 5 days’ work week

· Flexible working policy

Duties

Reporting to the Project Manager.

· Collect and analyse operational data from HVAC systems to assess system performance and identify opportunities for improvements.

· Conduct audits or re-commissioning work focusing on HVAC systems.

· Perform initial data assessments of clients' cooling systems to measure current efficiency levels.

· Identify energy efficiency improvement opportunities and recommend actionable solutions.

· Perform cost-benefit analysis to evaluate the technical feasibility and financial impact of proposed improvement plan.

· Contribute to preparing high-level, cost-effective design proposals and improvement strategies for potential clients as part of business development efforts.

· Ensure all technical solutions align with Singapore’s regulatory and industry standards.

· Collaborate closely with the regional project team, to support project planning and client engagement.

· Engage in training and development activities to improve technical skills and expand knowledge.

· Site coordination, project schedule planning, coordinate site works.

· Participate in technical discussions and supports to stakeholders on HVAC system configurations, energy efficiencies and energy-saving objectives.

· Assist in managing specific projects, ensuring adherence to timelines and achievement of set objectives.

Requirements and Qualifications

· Bachelor’s or Master’s Degree holder in Engineering (Building Services Engineering, Energy Engineering, Mechanical Engineering, Building Controls) or relevant disciplines with a minimum of 2 years’ relevant working experience.

· Strong analytical and problem-solving skills.

· Sound engineering knowledge and fundamental understanding of energy efficiency principles.

· Prior experience in engineering consulting work, building management system or facility operation will be advantageous.

· Candidates with less experience will be considered for an alternative position.

· Excellent time management, planning and organising ability.

· Strong communication, presentation, project and people management skills.

· High motivation to learn and adapt to challenges.

· Willingness to travel overseas when required.

· Ability to work independently and as part of a team.

Position Overview:

We are looking for a motivated and skilled Mechanical Design Engineer to join our dynamic team. In this role, you will be responsible for designing, analysing and overseeing the structural integrity of mechanical systems and components for our products. These include specialty vehicles, engines and shelters. This role demands a strong understanding of mechanical design, vehicle systems, and relevant automotive and/or military standards, with a focus on ensuring high performance, reliability, and operational effectiveness.

Key Responsibilities:

· Develop and optimize mechanical designs for mechanical and automotive systems, focusing on efficiency, manufacturability, and sustainability.

· Collaborate with multidisciplinary teams, including electrical and software engineers, to create innovative solutions that meet customer needs.

· Utilize advanced CAD tools (such as SolidWorks) to create 3D models and detailed engineering drawings.

· Perform simulations and analysis to validate designs and ensure they meet performance and safety criteria.

· Create prototypes and conduct hands-on testing to gather data, evaluate performance, and refine designs.

· Participate in design reviews and contribute to brainstorming sessions to drive continuous improvement and innovation.

· Maintain thorough documentation of design processes, test results, and compliance with industry regulations.

· Stay updated on industry advancements and incorporate new technologies and methodologies into your work.

· Support manufacturing team with technical guidance to ensure smooth production processes and troubleshoot any design-related issues.

Qualifications:

• Bachelor’s degree in Mechanical Engineering or a related field. Master’s degree or higher qualification is a plus.
• At least 2 years of experience in mechanical design engineering, ideally within the automotive sector.
• Proficiency in 3D CAD software (e.g. SolidWorks) and familiarity with simulation tools (e.g. FEA, CFD).
• Strong knowledge of mechanical design standards, materials, and manufacturing processes.
• Excellent analytical and problem-solving skills with a focus on innovative solutions.
• Effective communication skills, both written and verbal, with the ability to collaborate in a team-oriented environment.
• Results-driven and detail-oriented mindset with a passion for engineering excellence and continuous improvement.

Preferred Skills:

• Strong communication and teamwork skills
• Experience with automotive and/or military vehicle standards and protocols
• Familiarity with vehicle system design and testing procedures.
• Knowledge of mechanical engineering principles as they apply to vehicle systems and structures.
• Experience with project management and leadership in a technical environment.

What we offer:

· Competitive salary and benefits package

· Opportunities for career advancement and professional development

· Collaborative work environment that fosters innovation and communication

· Mentorship and guidance on best practices in automotive and mechanical design

· Opportunity to work on exciting projects at the forefront of automotive technology