Company Overview

The team has more than 15 years of experience developing 1G/2.5G/5GBase-T Ethernet physical layer PHY and switch chips for data centers, enterprise networks, and gateways and has successfully developed multiple generations of the most competitive products.

The company is headquarted in Kunshan, and the R&D team is located in Kunshan, Suzhou, Shanghai, and Singapore and plans to setup an R&D center in Silicon Valley.

The company is currently developing Ethernet PHY, gateway, and TSN switching chips. The target market is automotive & unpiloted driving, China's intelligent manufacturing, rail transit, and intelligent grid building industry provide domestic chips with "Independent intellectual property rights, independent and controllable.

We offer attractive salary commensurate with work experience + AWS + Bonus + Stock options

Job Responsibilities:

1. Help define analog system design specifications and architectures.
2. Lead analog designs during product development.
3. Participate in the design and realization of high-speed low-power small-area network chips.
4. Responsible for the design and verification of analog and mixed-signal circuits, particularly the CMOS signal processing circuits with profession in one of these areas, RX(e.g., AFE, ADC), TX(Serializer, DAC), PLL, LDO, ESD/EMC suppression etc.
5. Support high-level functional development and verification of analog and mix-circuit circuitry.
6. Cooperate with product definition, layout implementation, lab test and verifications.

Job Requirements:

1. Master with > 7 years' experience or PhD with > 4 years' experience in high-performance analog/mixed-signal ICs.
2. Proven experience in IC design including chip tape-out and lab evaluation of design.
3. Solid experience in using EDA CAD tools and performing Analog Custom Layout.
4. Experience in measuring IC performance and debug of design to correlate simulations to measurements.
5. Deep understanding of fundamental, including: detailed transistor level design, device physics, control/feedback loop stability analysis.
6. Direct project experience in at least one of the following areas a plus: ADC-DAC design PLL or clock/freq generation design.
7. Knowledge & experience in Verilog coding a plus.
8. Strong communication skills and good team player.

Assistant Engineer (Project Management )

Summary:

• Equipment set up for various systems, conduct testing & commissioning

• Follow up with clients in a timely manner

• Assist sales team with site survey & system design

• Provide support and manage project

• Perform troubleshooting & repair / replace faulty parts

• Provide onsite support to diagnose and rectify technical issue

• Ad hoc duties as required

Additional Information:

• Relevant educational qualifications in Diploma or Degree in Computer Science , Electrical / Electronic / Mechanical / Mechatronic or engineering field

• Proficient in Windows, Word, Power Point, Excel, and Access

• Able work independently and with other both indoor and outdoor locations

• Possess good communication and interpersonal skills

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Must have at least 1 year experience in handling cable wiring / electrical project

• Good working attitude and self-motivated

Mon to Fri 9am to 6pm

• Report to Construction Manager
• Manage and oversee construction activities near existing SPPG tunnel/GTP
• Coordination between client, consultant and sub-contractor(vendors)
• Ensure compliance with safety procedure and regulations
• Carry-out regular inspections and regular checks of concerned construction activities
• Resolve technical and engineering issue
• Ensure proper documentation (including Risk assessment/Method statement) and record-keeping of construction activities
• Ensure the activities comply with the local Authorities’ quality, environment, health & safety requirements and Clients’ General Specification
• Ensuring Permit to Work (PTW) is verified and valid for assigned duties.

Job Requirements:

• Degree in Civil Engineering from a recognized university, accredited by the Singapore PE Board
• Registered Resident Engineer with IES and valid certification in Singapore (Mandatory)
• Minimum of 1 year of Engineering experience
• 2 years of experience in the supervision of construction projects preferred
• Progress oriented, team player
• Technical expertise and knowledge in Civil Engineering Construction especially piling/RC works
• Proficient in Microsoft Offic and Auto CAD
• Attained CSCPM/BCSS/Confined space/Work At Height
• Good interpersonal skills and hardworking
• Location : Woodlands
• Project : Viaducts

Responsibilities

• Work closely with team members (developers, product manager, customer support, and partners) to develop, test and deliver high quality products.
• Prevent, collect, analyze and track product defects.
• Create detailed, comprehensive and well-structured test plans and test cases.
• Manage project dependencies and risk mitigation.

Minimum Qualifications

• 5+ years​ experience in automation testing development.
• Experience in writing clear, concise and comprehensive test plans and test cases.
• Experience in testing Webservice/Restful APIs and have a certain understanding of commonly used databases like MySQL.
• Good programming skills, hands on with at least one of the following languages: Java, Javascript, Python.
• Solid analytical and trouble-shooting skills.
• Good understanding of Agile/Scrum development methodologies as well as using collaboration tools, such as Jira, Trello, Slack, etc.
• Excellent interpersonal coordination and communication skills.
• Self-motivated, able to work independently as well as work as a team.
• Good exposure in a distributed/remote working environment.
• Enjoys breaking things and solving problems - not just able to find out the 'what', but also the 'why'.

Preferred Qualifications

• Experience on performance testing is a plus.
• Experience with automation build up.
• Skilled use of at least one source code management tool: SVN, Git, etc.

KEY DUTIES AND RESPONSIBILITES:

· Develop detailed project plans, including scope, goals, deliverables, resource allocation, timelines, and budgets.

· Planning & execution of all new and retrofit projects related to utilities & facilities.

· Ensuring the best available technologies are incorporated by design.

· Techno commercial evaluations of consultants, vendors, and contractors.

· Delivering the project within the budget and timeline approved.

· Responsible for relevant project costing and annual budget preparation related to engineering, facilities and EHS.

· Coordinating with statutory authorities for relevant approvals.

· Complying with operational and personnel standards, regulatory and statutory requirement to ensure efficient, reliable, and uninterrupted operation.

· Ensure smooth handing over of the project to end-users, coordinate and ensure deliverables as per plan.

· Ensure the site's facilities are kept to the highest standards for cGMP requirements, including Purified water system, WFI System, HVAC system, EMS, BMS, Boilers, fire safety, security, pest control, cleaning services and waste removal.

· Responsible for development SOPs and quality standard for site with following of site QMS procedures.

· Ensure to meet the required regulatory requirements (e.g. HSA, FDA etc.) and keep the site audit ready for all the time.

· Responsible for managing a team of vendors / contractors.

· To assist on any ah-hoc duties that have been assigned / task by the immediate Superior

Education:

· Bachelor’s / master’s degree in mechanical engineering or a related field. SCEM, Water efficiency Manager will be an added advantage.

· Project management certification: PMP or PRINCE2

Experience:

· Proficient / experienced in the Microsoft project software and project tracking.

· Proficient / experienced in AutoCAD.

· 3~5 years of experience in the green field / brown field area project management.

· Capability handles the pharma project from USD 2-5 million.

Soft Skills:

· Strong problem-solving abilities and analytical thinking.

· Excellent communication and teamwork skills.

· Ability to manage multiple projects and meet deadlines.

· Good investigation and report writing skills.

· Knowledge of industry standards and regulations.(GMP, PICs)

TO APPLY:

Candidates are encouraged to apply this position via email to [email protected] with the following information in the resume.

· Work experiences and job responsibilities.

· Current and Expected salary

· Reason for leaving.

· Date of availability

· Education background

We regret that only shortlisted candidates will be contacted.

Job Description

• Industry/ Organization Type: Chemical Manufacturing
• Position Title: R&D Electrical Engineer
• Working Location: Central
• Working Hours: Monday to Friday (8.45 AM – 5.30 PM)
• Salary Package: Basic Salary up to $3,800 + AWS + Bonus + Transport Allowance + Flexible Benefits
• Duration: Contract (3 years – Renewable)

Key Responsibilities

• Use 3D CAD design tools and perform high-precision 3D printing (FDM & DLP).
• Build simple circuit boards for sensor control and data acquisition using basic microcontroller boards like Arduino, ESP32, or STM32.
• Test and assemble electronic and mechanical parts, and debug software using basic tools like Python or C++.
• Maintain laboratory inventory and handle laboratory administrative tasks (procurement, equipment maintenance/repairs, and safety matters).
• Perform administrative tasks, such as ordering and payment using the SAP system.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• NITEC/Diploma in Electrical Engineering, Mechanical Engineering, Bioengineering, or relevant discipline
• Basic experience in 3D CAD design software, like Solidworks and Fusion360
• Has experience with microcontroller boards like Arduino, Esp32, STM32
• Basic experience in handling simple electronics and basic hands-on soldering skills

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68612 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Workstation Services (e.g., Desktop, Monitors, Printers and laptop) Breakfix- Desktop/Laptop Hardware related troubleshooting - Create, test and develop current Workstation images
• Prepare and configured new laptops/workstations specifications as assigned
• End User Computing (EUC) Device Refresh as part of BAU ( any bulk refresh will be treated as separate project activity)
• Works closely with vendors and managed services to maintain systems and services, manage change, and deploy new systems and services
• Provide onsite PC repair, virus- and spyware-remediation, maintenance/rejuvenation, data-recovery, networking and upgrades.
• Windows upgradations through SCCM agent. OS and application installation: Windows migrations and deployment of customized images using SCCM
• Troubleshoot for Windows and have good working knowledge of Office products; provide printer/fax support
• Knowledge of server and network communications equipment, protocols (i.e. DNS and TCPIP), transmission media, security and network management practices
• Analyzed and diagnosed DNS/DHCP/VPN and other networking issues
• End user issues related to network, IP config, windows troubleshooting
• Actively worked with hardware and software vendors to resolve client issues in a timely manner
• Active Directory, folder access and Group Policy administration, hardware configuration. User Support for VPN, MS Office, applications.
• Installation of printers, Configuring conference room facilities
• IP Phone installation, troubleshooting
• O365 configuration, troubleshooting
• Deskside Support, Spares management
• Installs, moves, adds, changes of hardware and software packages (IMAC);Hardware life cycle management
• Security compliance
• Populate Knowledge Management system with resolutions and workarounds
• Act as an escalation resource to the Help Desk, Site Administrators and Network Operations Center to assist with issues affecting endpoints
• Enterprise Mobility Management administration - enrollment and management of mobile devices. Adept knowledge on Airwatch/MDM
• Fault diagnosis / troubleshooting. Other aspects related to End user computing
• Maintain the Service Now queue of an average of 5-20 tickets per day, resolved Level 1-2 support issues
• Ensure swift ticket resolution and escalate issues to Level 3 technician as necessary
• Adept knowledge on Software Center(SWC) and ServiceNow

• 2 headcounts (one for engineer, one for customer service cum technical staff)
• Monday to Friday 8.45am to 5.45pm
• Japanese MNC
• Global leader in the development, manufacture, and sale of motors and automation equipment
• Benefit: Mobile Phone + Transport (claim basis)

Job Description

• Handle customer enquiry & suggesting solution based on customer’s requirement
• To build and maintain good rapport/relationship with existing customers
• Filter potential customer
• Understand AC/BL/ST/ACT product knowledge
• Provide Technical seminar for local & overseas customers
• Handle customer’s technical enquiries, field service & setup support
• Understand AZ network product together with PLC (if possible)
• Provide network setup support to customers

Requirements

• Proficient in Microsoft Word, Excel, PowerPoint
• Good communication skill, warm hospitality, work attitude
• Able to accept new challenges
• Willing to learn new technical contents
• Good negotiation skill
• Able to work independently

Education requirements

• Degree or Diploma in Electronic Electrical Engineering (EEE) or any related Engineering course of study
• Simple trouble shooting skills

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to [email protected]or please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Lee Jia Chian (Jayleen)
EA Personnel Reg No: R24124361

Benefits:

-Performance Bonus (~3 months)

-Flexi Dollars S$ 800

-Company Bus

(Company bus at 8AM from Joo Koon MRT (beside NTUC Hub) /

(Public bus 253 from Joo Koon Interchange B24009)

Salary Package:
-Basic up to $6000

Working Hours: 5 Days Work Week (Mon-Fri, 8.30am to 5.30pm)

Working Location: Jurong Island

Key Responsibilities:

· To develop and maintain Warehouse Control System (WCS) application.

· Development of REST API endpoints for interfacing with external and internal stakeholders

· Design and documentation of REST APIs

· Development of REST API interfaces

· Implementing REST API logic

· Database integrations for persisting REST API data

· Testing of REST APIs

· Development of internal APIs for interfacing with internal components

· Writing documentation for internal API interfaces

· Development of internal API interfaces

· Implementing internal API logic

· Testing of internal APIs

· Assist with software deployment and testing in customer site.

· Supporting deployment of WCS system on customer’s premises

· Handling integrations with additional systems

· Deployment and testing of the system

· DevOps related tasks

Requirements:

· Minimum Bachelor's degree in computer science, computer engineering, information technology or a and relevant practical experience

· Software skills: Python, Docker,Git, REST API

· Highly motivated and creative, thinking "out of the box", team player, problem solver, good interpersonal and communication skills

*Able to start work within short notice will be highly advantageous.*
**Please be notified that only shortlisted candidates will be notified**

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: TOH SHIQI

EA Personnel No: R23119083

EA License No: 21C0845

Duties & Responsibilities:

• Responsible for the formulation of schedules and datelines for design and date of submission.
• Check detailed design and drawings based on relevant codes and client specifications, while ensuring the most cost-efficient methods of design are used.
• Liaise and co-ordinate with Project Department to obtain relevant information for detailed design.
• Determine the conditions and study all pertaining data thoroughly and accurately for a design. Many different combinations of loadings are possible and the most probable combination of simultaneous load for an economical and safe design is selected.
• Control and issue all technical documents.
• Any ad hoc project assigned by Design Manager.

Min Qualifications / Experience:

• Bachelor’s degree in mechanical engineering with minimum 3 years relevant experience

Job Skills Required:

• Mechanical design of pressure vessels, heat exchangers & atmospheric storage tanks. Thermal design of heat exchangers is also a required skill.
• Familiar with international design codes such as ASME, British, Australian & European Codes, Tema, API650 & etc.
• Proficient in design software such as PVELite, NozzlePro, StaadPro & Autocad.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to [email protected]or please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Lee Jia Chian (Jayleen)
EA Personnel Reg No: R24124361

Responsibilities:

• Prepare and resubmit shop drawings following consultant comments.
• Attend safety and site coordination meetings.
• Schedule material deliveries and monitor progress.
• Ensure compliance with project specifications and workmanship standards.
• Conduct site testing, commissioning, and prepare as-built drawings and manuals.

Requirements:

• Diploma in Electrical Engineering or it's equivalent
• Minimum 2 years of experience in a related field.
• Ability to supervise subcontractors/suppliers and manage tight schedules.
• Able to work in a team

Interested candidates who wish to apply for the advertised position, please click 'APPLY' to submit your application or send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1874608

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Position title : Vision Software Engineer

Location: Admirality Street
Working Days: 5 Day A Week
Working hours : 9:00am - 6:00pm
Salary : $5000 - $8000 (depends experience)

Job Summary:

We are seeking an experienced Software Engineer to join our team, responsible for
designing, developing, and maintaining software applications for vision systems.

Responsibilities:

• Design and develop PC based automated visual inspection systems for our full range of semiconductor equipment.
• Evaluate and feasibility study on the customer’s vision specifications.
• Responsible to integrate any new vision hardware (camera, frame grabber, etc) onto the vision software.
• Troubleshooting and improve the processing time of the inspection.
• Provide technical support to internal and external customers to fulfill the inspection requirements. Change the vision inspection algorithm to improve the inspection capabilities and its performance.
• Be the key driver for continuous improvement plans for new and existing inspection capabilities.
• Coordinate with customer for any new enquiry with sale personnel if needed.
• Work closely with the vision application and optics team members to produce the best inspection result.
• Build and nurture a culture in engineering organization of harmony, quality, ownership, collaboration, continuous improvement and data-driven decision making.

Requirements:

• BS Science Diploma or higher in electrical and electronic, mechanical, or mechatronics engineering or related technical discipline or equivalent practical.
• Technical troubleshooting experience.
• Minimum 3 years in related field.
• Relevant technical work experience including automation machine system troubleshooting.
• Experience working with end customers.
• Understanding semi-conductor manufacturing process, vision inspection settings, machine software settings and configuration or equivalent practical experience.
• At least 3+ years of experience in software development with C#, WPF, Image Processing , Halcon (bonus)

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

Job Description & Requirements

1. Formulate and provide directives for Production Department in meeting organization's goals and committed to Quality Management System.
2. Accountable with the assigned factory sections in terms of production, New Model Development, Customer Service and Support, Supplier and Materials Management, Logistics and Transportation.
3. Analyze section profit/loss of projects and providing cost control and cost effectiveness strategy.
4. Provide production & material planning in ensuring production efficiency and on time delivery.
5. Ensure effective control of machine up/down time and well scheduled and optimized planning in machine / work-center load.
6. Manpower balancing and deplaoyment strategy with manpower skill set.
7. Continuous improvement program to ensure productivity, cost and quality effectiveness, general housekeeping and safety.
8. Formulate, identify and conduct management / training workshop to initiate / facilitate staff in aligning organizations missions and objectives and actions plans.
9. Support other function activities within the company to achieve the overall business goals and objectives.
10. Implement process improvement.
11. Authorize the appropriate use of performance monitoring and statistical techniques.
12. Ensure and coordinate the implementation of risk assessment and risk contol of medical devices.

Requirements:

• Preferred to have Diploma / Degree in Mechanical / Precision Engineering or equivalent.
• Minimum 6 years in a Manufacturing environment (preferably in Precision Engrg / Sheet metal industry) and with at least 4 years of supervisory capacity.
• Exposure with involvement in newly factory, product / process set-up is much preferred.
• In-depth understanding of manufacturing cycle and good budgeting control.
• Strong leadership with good analytical and problem solving skill, as well as dynamic in planning and result oriented.

• Experience in application support role for min 5 years for support and good knowledge of Java, Unix/Linux, SQL
• Recent experience in working with Java J2EE applications
• Experience in Unix commands , SQL queries
• Experience in programming languages such as JAVA/J2EE.
• Knowledge of web applications, batch jobs, JBOSS, MariaDB, SQL, Shell
• Knowledge of Job scheduling, MQ setup
• Dynamic individual with thirst to learn
• Strong team player with excellent inter-personal skills & ability to meet SLAs

• can work on publick holidays
• can work on shifts/change of shifts
• can work and stand for long hours
• at least 10 years experiences
• have relavant certificates/diploma
• hardworking and keen
• 
  
• Provide overall supervision of production activities.
• Plan, organize and lead a team of production workers to achieve production target and output, cycle time, and yield.
• Improvement in maintaining product quality and productivity. Provide a guideline to check on processes thereby assuring that work is done by the operators.
• Monitor the daily efficiency status of the line.
• Ensure good housekeeping and safety at the workplace.
• Oversee hiring and training of food production personnel
• Perform other duties as assigned.

Job Description & Requirements

1. Formulate and provide directives for Production Department in meeting organization's goals and committed to Quality Management System.
2. Accountable with the assigned factory sections in terms of production, New Model Development, Customer Service and Support, Supplier and Materials Management, Logistics and Transportation.
3. Analyze section profit/loss of projects and providing cost control and cost effectiveness strategy.
4. Provide production & material planning in ensuring production efficiency and on time delivery.
5. Ensure effective control of machine up/down time and well scheduled and optimized planning in machine / work-center load.
6. Manpower balancing and deplaoyment strategy with manpower skill set.
7. Continuous improvement program to ensure productivity, cost and quality effectiveness, general housekeeping and safety.
8. Formulate, identify and conduct management / training workshop to initiate / facilitate staff in aligning organizations missions and objectives and actions plans.
9. Support other function activities within the company to achieve the overall business goals and objectives.
10. Implement process improvement.
11. Authorize the appropriate use of performance monitoring and statistical techniques.
12. Ensure and coordinate the implementation of risk assessment and risk contol of medical devices.

Requirements:

• Preferred to have Diploma / Degree in Mechanical / Precision Engineering or equivalent.
• Minimum 6 years in a Manufacturing environment (preferably in Precision Engrg / Sheet metal industry) and with at least 4 years of supervisory capacity.
• Exposure with involvement in newly factory, product / process set-up is much preferred.
• In-depth understanding of manufacturing cycle and good budgeting control.
• Strong leadership with good analytical and problem solving skill, as well as dynamic in planning and result oriented.

Primary

1. To Provide primarily support at production department.
2. Assist superiors in prepare and compile reports.
3. Prepare, generate and release job order / purchase requisition to various departments of the confirmed job orders.
4. Responsible for planning of production output, monitor machine capacity, OEE etc.
5. Work closely among inter-departments to ensure committed schedules are met.
6. Provide regular update to the sales/Projects team on project development in a timely manner.
7. Maintenance and upkeep records of Production/Engineering/Technical documents.
8. Arrange production run according to Supervisor/HOD instruction.
9. Receiving/distribution of raw material for production usage.
10. Parts distribution to other departments for next process.
11. Able to systemize and improve on workflow.
12. Good application and know-know on the ERP / reporting tools.
13. Ability to understand or interpret all technical drawing and part specification.

Education level:

1. Min. NTC/Nitec level ME/Mechatronic or its relevant.

Experience level:

1. Two (2) years in relevant experience in clerical environment or manufacturing or its relevant

2. Perform competent in clerical duties, computer literacy.

3. Result oriented, resourceful and independent.

4. Ability to read, understand mechanical drawing and Geometric Dimensioning and Tolerance.

In this role, you are required to support the daily operations of the production section you are assigned to. You will be required to maintain the production area cleanliness and comply with food hygiene management standards.

Job Description

• Prepare and process of food items (Halal).
• Prepare items according to in-house procedures.
• Follow food production and preparation specifications.
• Preparing food ingredients by measuring, mixing, stirring, chopping, slicing, dicing, peeling, or otherwise preparing them for use in meal preparation.
• Ensure proper and safe operation of machineries.
• Maintain & ensure the cleanliness of work area.
• Check and ensure that quality and quantity of items ordered are received and stored in proper condition.
• Keep track of inventory to ensure adequate food ingredients, packaging supplies and finished product.
• Perform other ad-hoc duties as requested.

Requirements:

• Physically fit
• Able to work as a team.
• No Experience may apply.

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

Responsibilities:

• Develop and maintain project schedules in consultation with the project team
• Coordinate and obtain inputs from project team, contractors and suppliers to support the development of project programmes
• Prepare baseline schedule which includes resources, cost loadings, S-curves, Programme Narratives, and scope appreciation presentation
• Work on progress forecast and prepare rolling programmes
• Update, track and report project progress against planned schedule
• Monitor and control progress to make sure that turnover and cost is in line with master construction program
• Ensure timely submission of materials with approvals
• Ensure project orders and deliveries are in accordance to agreed schedules
• Assist in the overall interfacing and coordination works as and when required

Requirements

• Degree in Civil / Structural Engineering recognized by Professional Engineers Board (PEB) Singapore or Building and Construction Authority (BCA)
• Good understanding of construction industry practices and standards to perform planning and scheduling
• Experience in LTA programme preparation, programme requirements and submissions
• At least 3 years’ experience in large scale projects with hands on experience doing planning and scheduling for civil and building projects
• Candidate with more experience will be considered for a senior role
• Proficient in planning software such as Primavera P6 and Microsoft Project
• Candidate with 4D BIM knowledge will have an added advantage
• Highly motivated, self-driven with initiatives to work independently to produce programmes, narrative and histograms
• Meticulous, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment

Information provided in response to this job advertisement will be treated in strict confidence and be used for recruitment purpose only.

The CPPS group is seeking a highly motivated scientist or senior scientist to lead and conduct research in Industry 5.0 smart manufacturing solutions and integrating digital technologies with AI-enabled physical production systems that promote human-centricity, environmental sustainability, and value chain resilience in manufacturing. The ideal candidate should have a strong background in controls and/or automation. Knowledge of PLC programming would be a strong advantage.

The key roles & responsibilities include, but are not limited to the following:

• Research into novel adaptive and autonomous control algorithms for scalable self-learning, self-optimizing and self-recovery production systems
• Working with a team of scientists and engineers to design and implement integrated IIOT and AI-enabled production systems for smart manufacturing
• Formulate scientific research directions and innovative proposals to secure competitive funding
• Understand the autonomous manufacturing domain and provide innovative solutions to industry problems in this area
• Familiarity with industry communication protocols such as OPC-UA, MQTT, Profibus, and RS-232 is needed

Job Requirement:

• PhD degree in Computer Science / Engineering, Electrical Engineering, Mechanical Engineering, with emphasis on controls and/or automation.
• Fresh Graduates with strong fundamentals in controls and IIOT are welcome. (For Senior Scientist) 5 years’ experience in research and leadership of R&D projects in the relevant area of expertise.
• Good track record of scientific publications in top journals or conferences
• Excellent technical presentation and writing skills
• Ability to develop and program PLCs and other control systems, utilizing platforms like TwinCAT, EcoStruxure, Codesys and others is a strong advantage
• Can-do attitude and able to work with different needs of various stakeholders
• Proactive team player and technically motivated to solve problems innovatively

Production Test Manager | 5 Days | Hands-On Development Exp in J570 / Teradyne Tester

Working Location:Tai Seng
Working Days:5days (office hours)
Salary Range:$10,000 – $12,000

Job Requirement:

• ATE Test Program Design and Development for new products (Production and Characterization Test)
• Design/Develop Final Test Loadboard and Wafersort Probecard
• Perform Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Solid digital and mixed-signal programming experience on ATE using C++/VB language, and scripting
• Monitor and manage production test yields, maverick lots, engineering lots, product test log maintenance, product data statistical process, characterization data process.
• Hands-on test debugging, RMA analysis, and improving test solutions (Hardware and Software)
• Establish cost-effective production test solutions
• Develop team technical competency.
• Build product test plan, schedule, resources requirement and project tracking and execution.
• Conduct product test and releases review, approve the test program releases.
• Maintain and improve the product test process.

Job Requirement:

• Minimum Bachelor's Degree in Engineering (Electrical/Electronics)
• Minimum 5-yrs ATE Test Program Development (C++ and/or VB)
• Experience in Test HW Development (Loadboard and Probecard)
• Good knowledge on manufacturing process (fab, packaging, test)
• Hands-on development experience is a must with Teradyne J750 ATE testers, IG-XL test programming
• Hands-on development experience with Chroma and other main stream testers.
• Project management skills and experience in people management.
• Preferred: Knowledge in AEC Q100 automotive qualification guidelines, experience in the automotive test flow, AEC Q100 data analysis, wafer and FT lot process.

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

• Working Location: Tai Seng
• Working Days: 5 days (office hours)
• Salary Range: $10,000 – $12,000

Requirement:

• ATE Test Program Design and Development for new products (Production and Characterization Test)
• Design/Develop Final Test Loadboard and Wafersort Probecard
• Perform Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Solid digital and mixed-signal programming experience on ATE using C++/VB language, and scripting
• Monitor and manage production test yields, maverick lots, engineering lots, product test log maintenance, product data statistical process, characterization data process.
• Hands-on test debugging, RMA analysis, and improving test solutions (Hardware and Software)
• Establish cost-effective production test solutions
• Develop team technical competency.
• Build product test plan, schedule, resources requirement and project tracking and execution.
• Conduct product test and releases review, approve the test program releases.
• Maintain and improve the product test process.

Requirements:

• Minimum Bachelor's Degree in Engineering (Electrical/Electronics)
• Minimum 5-yrs ATE Test Program Development (C++ and/or VB)
• Experience in Test HW Development (Loadboard and Probecard)
• Good knowledge on manufacturing process (fab, packaging, test)
• Hands-on development experience is a must with Teradyne J750 ATE testers, IG-XL test programming
• Hands-on development experience with Chroma and other main stream testers.
• Project management skills and experience in people management.
• Preferred: Knowledge in AEC Q100 automotive qualification guidelines, experience in the automotive test flow, AEC Q100 data analysis, wafer and FT lot process.

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

• Working Location:Tai Seng
• Working Days:5days (office hours)
• Salary Range:$10,000 – $12,000
  
  Job Requirement:
• ATE Test Program Design and Development for new products (Production and Characterization Test)
• Design/Develop Final Test Loadboard and Wafersort Probecard
• Perform Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Solid digital and mixed-signal programming experience on ATE using C++/VB language, and scripting
• Monitor and manage production test yields, maverick lots, engineering lots, product test log maintenance, product data statistical process, characterization data process.
• Hands-on test debugging, RMA analysis, and improving test solutions (Hardware and Software)
• Establish cost-effective production test solutions
• Develop team technical competency.
• Build product test plan, schedule, resources requirement and project tracking and execution.
• Conduct product test and releases review, approve the test program releases.
• Maintain and improve the product test process.

Job Requirement:

• Minimum Bachelor's Degree in Engineering (Electrical/Electronics)
• Minimum 5-yrs ATE Test Program Development (C++ and/or VB)
• Experience in Test HW Development (Loadboard and Probecard)
• Good knowledge on manufacturing process (fab, packaging, test)
• Hands-on development experience is a must with Teradyne J750 ATE testers, IG-XL test programming
• Hands-on development experience with Chroma and other main stream testers.
• Project management skills and experience in people management.
• Preferred: Knowledge in AEC Q100 automotive qualification guidelines, experience in the automotive test flow, AEC Q100 data analysis, wafer and FT lot process.

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580