Job responsibilities:

• Report to, and provide support to the Lead/ Senior Instrumentation Engineer on assigned projects and report to the Head - Instrumentation Engineering at the basis level.
• Be familiar with and implement Company work processes, procedures and quality policy as appropriate on assigned areas of projects.
• Be aware of Company contractual requirements and Scope Boundaries
• Responsible for work assigned by the Lead / Senior Engineers through project lifecycle phases and for compliance to project specific performance, integrity, quality and HSE requirements relevant to his/ her assigned scope of work. Specific duties could include:
• Prepare requisitions, specifications and datasheets as assigned.
• Evaluate vendor offers and prepare Technical Bid Evaluation Report for assigned packages.
• Populate Instrument database such as SPI/Aveva Instrumentation.
• Prepare and Issue documents such as Instrument Index, Hazardous Are registers etc
• Provide inputs to designers to develop design/drafting deliverables such as cable block diagrams, wiring diagrams, Layouts and review these deliverables
• Assist in preparation of control system deliverables such as I/O lists, Control narratives, Cause and Effect Matrix etc.
• Review and provide technical inputs on Instrumentation Engineering related technical matters to interfacing disciplines
• Review and provide technical inputs to equipment/ package related technical matters
• Be responsible for and manage the Instrumentation Engineering technical interfaces with equipment and package suppliers, in coordination with the Lead/ Senior Instrumentation Engineer, for assigned areas to ensure that the equipment and packages comply with the technical requirements & specifications of and to monitor the compliance to Client’s Basis of Design, Standards & Project Specifications.
• Continuously seek to improve discipline working methods, tools and procedures and contribute actively to “Discipline Development” and “Experience Transfer”.

Work experience requirements:

• Minimum of 3 years of work experience in instrumentation engineering activities such as preparation of data sheets, specifications, Technical Bid Evaluation reports etc in a reputed engineering consultancy.
• Applicants with less than 5 years of relevant Instrumentation Engineering experience may be considered for junior positions.

Qualifications:

• Bachelor’s Degree in Instrumentation/Electrical/Chemical Engineering with relevant work experience as per above.

Other skills:

• A self-starter who can work independently, make sound decisions, analyse problems and provide focused solutions.
• Good understanding and knowledge of oil and natural gas industry standards such as, but not limited to, API (American Petroleum Institute), ISO (International Organisation for Standardisation),IEC, NORSOK, EU Directives ATEx, IECex requirements and other relevant standards related to Instrumentation Engineering.
• Effective verbal and written communication skills in English
• Experience in engineering of Oil and Gas offshore projects would be an advantage.
• Experience in SPI/Aveva Instrumentation would be an advantage.
• Applicant shall have strong computer literacy in commonly used business software applications such MS Word, MS excel, Teams etc.
  
  We regret that only shortlisted candidates will be notified.

To assist in the daily production operation, ensuring schedules of customer is met.

Create and develop quality reports based on drawings

Maintain measuring instruments calibration list.

Liaising with customers and suppliers

Fresh graduates are welcome to apply

Willing to learn and explore

Friendly environment

Engineering graduates prefer but open to others Diploma/ITE also

Versatile to different roles in the company

Responsibilities of Process Engineer

· Process Technology development for Silicon wafer manufacturing

· Manage wafer manufacturing process in achieving quality, yield, quality and production targets.

· Collaborate with Technology counterparts globally on process alignment and qualification of new processes, suppliers and consumables if needed

· Work with cross-functional teams on process capability improvement and yield enhancement projects

· Coordinate troubleshooting of process issues and yield losses

· Drive for continuous process improvement and permanent solutions to resolve chronic process and quality issues.

· Develop best practices, routines and innovative solutions for continuous improvement

· Perform Statistical data analysis for process improvement and interpretation of data

· Apply problem solving methods (8D, Fishbone, DOE etc.) and risk analysis (like FMEA)

Requirements of Process Engineer

· University degree in Engineering or Science

· Min. 3 years relevant semicon/ manufacturing experience

· Knowledge of quality management systems, data analysis, Design of Experiments (DOE) and statistical process control (SPC)

· Proficient in statistical software like JMP, visual basic, database and queries will be an added advantage

· Self-motivated and able to work well in a team

· Good analytical and communication skills

· Willingness and curiosity to learn attitude

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to develop a novel near-eye display technology for augmented reality (AR).

Key Responsibilities

• Participate in the research project with Principal Investigator (PI), Co-PI and the research team members to ensure all project deliverables are met.
• Conduct research towards a novel near-eye display for augmented reality and develop a prototype.
• Coordinate procurement and liaison with vendors/suppliers and carry out other project related activities.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment.

Job Requirements

• A Bachelor/Master’s degree in computer, mechanics or related programmes.
• Knowledge and experience in near-eye display for VR/AR will be advantageous.
• Able to build and maintain strong working relationships with people within and external to the university.
• Show strong initiative and take ownership of work.
• Teamwork spirit

Key Competencies

• >= 2 years of research experience in near-eye display technologies for VR/MR.
• Teamwork spirit and ownership attitude.

PFU Asia Pacific Pte Ltd ("PAPL") is assigned as the control center in managing scanner sales and marketing within Southest Asia region.

Join us as Technical Support Engineer to be an integral part of our regional sales team, helping to drive the growth of the Ricoh document scanners.

Responsibilities

1.Post-sales support :

- Provide technical support to partner or customer after purchasing our product.

- Assist technical team of partner and customer to tackle and resolve technical issue.

- Dissemble and assemble scanner according to maintenance manual(training will be provided).

- Train and enable service partner to provide post-sales support to end-user

- Manage and process of warranty claims, demo/standby unit loan, spare part cannibalization, with system and paperwork.

- Installation and configuration of hardware and software products.

2. Pre-sales Support :

- Support sales activity as technical expertise.

- Assist sales team, partner or customer to win and deliver deals.

- Demonstration of hardware and software product.

- Assist in integration of own products with 3rd party solution.

- Training and enable partner on pre-sales technical capabilities.

- slight experience in programming will be advantage.

- Occasional overseas travel is required.

(Average 1 trip per quarter. Mainly to ASEAN, South Asia countries, or Japan)

We appreciate all applicants for their interest in this opportunity. However, only those shortlisted for interview will be contacted.

About Us: We are a leading AI and robotics company at the forefront of technological innovation, dedicated to creating cutting-edge solutions that revolutionize industries. As we continue to grow, we are seeking talented Software Engineers to join our team.

Job Description: dConstruct is hiring Software Engineers who will be developing our robotics software stack and helping to perform software integration for specific use cases. You will be coding, calling into our software stack and creating applications which utilise our software stack to meet the needs of clients. You will be working with clients to understand their needs and in turn, implement their requirements accordingly. At the same time, you will be familiarised with the entire robotics development and software workflow.

Responsibilities

• Develop and integrate functionality from our software stack for external clients.
• Lead the test of applications and software integration works you create.
• Occasionally aid in tests and deployment of our robots in real world environments.

Requirements and Skills

• Good foundation in modern C++ programming
• Strong foundation in Data Structures/Algorithms
• Understand concepts in memory allocation, cache performance, data-oriented programming
• Comfortable in writing and debugging high performance native code
• Comfortable working on large code bases
• Able to do technical communication to understand and explain the needs of end-users
• Able to work independently with some guidance

Bonus Requirements and Skills

• Familiarity with Golang
• Understanding and familiarity with 3D Data Structures/Algorithms
• Experience with video and audio streaming

Job Description:
We are seeking a skilled Data Engineer with expertise in AWS cloud computing and database administration to join our team. In this role, you will design, implement, and manage scalable data solutions while maintaining and optimizing databases to ensure high performance and reliability..

Job Responsibilities:

• Design, deploy, maintain, and optimize database systems (Oracle, MySQL, SQL Server), including installation, configuration, backup, and recovery.
• Monitor and optimize database performance to improve response time, stability, and reliability.
• Plan and expand database capacity to ensure scalability and meet business requirements.
• Deploy and manage cloud infrastructure on AWS, including servers, networks, storage, and other resources, to provide a stable and reliable environment.
• Create, configure, and maintain AWS services to align with business needs, selecting appropriate services based on requirements.
• Implement and manage monitoring tools to track the performance and operational status of databases and AWS environments, proactively identifying and resolving potential issues.
• Collaborate with cross-functional teams to deliver efficient, scalable, and reliable cloud and database solutions.

Job Requirements:

• Bachelor’s degree or higher in Computer Science, Information Systems, or related fields.
• Minimum of 3+ years of experience in database administration (with hands-on experience in Oracle, MySQL, or SQL Server).
• Strong experience with AWS services and managing cloud infrastructure.
• In-depth knowledge of database performance tuning, troubleshooting, and optimization techniques.
• Familiarity with cloud networking concepts and using monitoring tools for AWS environments.
• Strong communication and problem-solving skills to handle technical challenges effectively.

Responsibility

• Responsible for high-performance block implementation (RTL to GDSII).
• Perform block level floor planning, power grid implementation, APR placement, timing optimization, CTS and routing.
• Close the design to meet timing, power budget and area targets.
• Run physical verification flows (DRC/LVS/EM/IR), and implement fixes to meet the requirements.
• Implement ECO’s to address functional bugs, timing and physical verification violations.
• Responsible for the generation and maintenance of block-level STA constraints and performing STA signoff checks.
• Responsible for timing model generation and supporting the successful integration of blocks into SOC.

Qualification

• At least 3 years of hands-on experience in digital-physical design.
• Bachelor/Master’s degree in Electrical Engineering with an emphasis in IC design
• Experience with digital Physical design and Static Timing Analysis
• Experience in floor planning and routing.
• Experience in advanced process nodes (5nm).
• Good experience with Synopsys implementation tools (DC, ICC2), and experience with Cadence (Innovus) implementation tool is a plus.
• Experience in Mentor Verification tool, Calibre.
• Proficient in TCL coding, Perl/Python knowledge is a plus.
• Good written and communication skills.

UnaBiz is the leading IOT company in Singapore. HQ in Singapore, with office in Taiwan, Japan, France, Spain and providing IOT solution globally.

Join the company that supplies solutions to established local / MNC like SIA, CBRE, JLL, Shiseido, TotalEnergies, Certis, Engie, and many more!

Responsibilities:

- Project Management of IOT/sensor deployments

- On site visits & surveys before project confirmation

- Coordinate and manages technicians and vendors

- Coordinates procurement with purchasing dept

- Experience in green building (e.g. energy monitoring) deployments

- Keep track of project progress & updates stakeholders

- Propose/validate solutions

Requirements:

- Technical/engineering background and/or experience in Computer / Electronics / Sustainability / Facility Management

- Min 5 years of relevant experience

- Can multitasks

- Work well in team

- Proficient in MS Excel, MS Word

- Strong interest in new exciting world of IOT

Benefits

1. Rewarding career at the leading IOT company in Singapore

2. Good compensation commensurate with experience and skill

3. Free transportation to/fro office and home

4. Free lunch in office

5. 5 working days per week

ob Responsibilities:

• Plan and execute system administration tasks, including installation, deployment, testing, and commissioning.
• Generate and maintain documentation such as maintenance reports and checklists.
• Create and regularly update technical documentation, covering system configurations and procedures.
• Coordinate with project teams and external clients to plan and execute system upgrades/maintenance projects.
• Conduct maintenance on VA servers, network equipment, and camera systems.
• Address user-reported IT issues promptly, delivering technical support as needed.
• Diagnose and resolve issues related to hardware, software, and network functionality.
• Implement security best practices to safeguard systems from threats and vulnerabilities.
• Apply updates and patches to operating systems, software applications, and drivers to ensure security and performance (Windows Server, RHEL).

Job Requirements:

• Minimum Diploma/Degree in Information Technology or similar function
• Minimum 1 year of experience in server/desktop maintenance or similar function
• Hands-on experiences in configure, troubleshoot Microsoft Windows Servers and Red Hat Linux Servers
• Level 2 Experience is required
• Familiar with system applications & networking concepts
• Proficiency in troubleshooting and problem-solving

The Digital Health Accelerator (DHA) is led by A*STAR, Ministry of Health (MOH) Singapore, SingHealth, National Healthcare Group (NHG), and National University Health System (NUHS). DHA supports innovators in driving adoption and scaling of market ready or near-market ready digital health solutions. DHA is hosted by Singapore's Diagnostics Development Hub (DxD Hub).

The DHA integration engineer is responsible for planning and developing workflow and technical interfaces between healthcare IT systems. She/He will work with DHA Project Managers, Solution Architects, health systems and companies to accomplish this objective. She/He may also be called upon to advise other developers on integration standards.

Responsibilities:

• You’ll be involved in the development, design, build, testing, and go live phases of multiple integration projects.
• This includes scripting to conform / transform to another systems specifications.
• You will also work with internal teams to continuously improve processes and procedures around deployment of interoperability products that communicate in HIT standards-based formats such as HL7, IHE Profiles, Direct, or SMART on FHIR.
• The Integration Engineer oversees the development of new interfaces and maintain the sandbox environment up to date for application testing.

Requirements:

• Bachelor’s degree in information systems, Computer Science, Engineering, Computer Information Systems, Management Information Systems, or equivalent experience
• 3+ years’ experience in HCIT integration using established and contemporary interoperability standards (e.g. HL7, SMRT, FHIR)
• Experience with SQL and relational databases, and communication using secure protocols.
• Ability to work in a team environment alongside developers and deployment teams.
• Utilise engines like Mirth Connect or Rhapsody to have a standard way of integration using both HL7 and DICOM
• Knowledge in developing and configuring Context Launch requirements according to AES 256 standards.
• Assess and customise integrations (HL7 / FHIR / DICOM) based on the project to specific workflow.
• Experience with cloud deployments and/or pipelines, especially Pivotal Cloud Foundry
• Experience with popular healthcare integration engines with ability to recommend and/or select different integration approaches depending on the desired outcomes for the system.
• Strong communication skills and ability to work with project stakeholders from different backgrounds (e.g. technical, clinical)
• Experience integrating with Singapore public hospital technical stack and working with Synapxe are a plus.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Digital Health Accelerator (DHA) is led by A*STAR, Ministry of Health (MOH) Singapore, SingHealth, National Healthcare Group (NHG), and National University Health System (NUHS). DHA supports innovators in driving adoption and scaling of market ready or near-market ready digital health solutions. DHA is hosted by Singapore's Diagnostics Development Hub (DxD Hub). The DHA integration engineer is responsible for planning and developing workflow and technical interfaces between healthcare IT systems. She/He will work with DHA Project Managers, Solution Architects, health systems and companies to accomplish this objective. She/He may also be called upon to advise other developers on integration standards.

Responsibilities:

• You’ll be involved in the development, design, build, testing, and go live phases of multiple integration projects.
• This includes scripting to conform / transform to another systems specifications.
• You will also work with internal teams to continuously improve processes and procedures around deployment of interoperability products that communicate in HIT standards-based formats such as HL7, IHE Profiles, Direct, or SMART on FHIR.
• The Integration Engineer oversees the development of new interfaces and maintain the sandbox environment up to date for application testing.

Requirements:

• Bachelor’s degree in information systems, Computer Science, Engineering, Computer Information Systems, Management Information Systems, or equivalent experience
• 5+ years’ experience in HCIT integration using established and contemporary interoperability standards (e.g. HL7, SMRT, FHIR)
• Experience with SQL and relational databases, and communication using secure protocols.
• Ability to work in a team environment alongside developers and deployment teams.
• Utilise engines like Mirth Connect or Rhapsody to have a standard way of integration using both HL7 and DICOM
• Knowledge in developing and configuring Context Launch requirements according to AES 256 standards.
• Assess and customise integrations (HL7 / FHIR / DICOM) based on the project to specific workflow.
• Experience with cloud deployments and/or pipelines, especially Pivotal Cloud Foundry
• Experience with popular healthcare integration engines with ability to recommend and/or select different integration approaches depending on the desired outcomes for the system.
• Strong communication skills and ability to work with project stakeholders from different backgrounds (e.g. technical, clinical)
• Experience integrating with Singapore public hospital technical stack and working with Synapxe are a plus.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description

• Undertake detailed design in one or more of the following field of expertise: Civil (drainage, sewage), Bridge/Tunnel, Underground Excavation and Tunnelling works
• Execution of projects and liaison with the Client, Client’s Consultants, Contractor, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Analysis on structural components using various engineering software

Requirements

• Degree in Civil and Structural Engineering or its equivalent
• Prefer degree recognized by the Professional Engineers Board of Singapore for Associate level
• Minimum 5 years relevant experience
• Good exposure in the analysis and design of geotechnical works, concrete structures, steel structures, civil works, or soil-structure interactions
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

UnaBiz is the leading IOT company in Singapore. HQ in Singapore, with office in Taiwan, Japan, France, Spain and providing IOT solution globally.

Join the company that supplies solutions to established local / MNC like SIA, CBRE, JLL, Shiseido, TotalEnergies, Certis, Engie, and many more!

Responsibilities:

- Project Management of IOT/sensor deployments

- On site visits & surveys before project confirmation

- Coordinate and manages technicians and vendors

- Coordinates procurement with purchasing dept

- Experience in green building (e.g. energy monitoring) deployments

- Keep track of project progress & updates stakeholders

- Propose/validate solutions

Requirements:

- Technical/engineering background and/or experience in Facilities Management / Green Building / Sustainability / Eletronics

- Min 2 years of relevant experience

- Multitasks well

- Proficient in MS Excel, MS Word

- Strong interest in new exciting world of IOT

Benefits

1. Rewarding career at the leading IOT company in Singapore

2. Excellent compensation commensurate with experience and skill

3. Activities to build company culture of camaderie

4. Free transportation to/fro office and home

5. Free lunch in office

6. 5 working days per week

What you will do

• Customer support responsibilities, ensuring timely and effective resolution of customer inquiries and issues
• Project management involvement, including planning, execution, and delivery
• Support marketing promotion activities to enhance product visibility and market presence
• Engage in clear and effective communication with customers to address their needs and concerns
• Aid in debugging and testing to ensure product quality and reliability

Required Skills

• Excellent proficiency in English and Mandarin, both written and verbal, to liaise with our affiliates from different regions.
• Preferred experience in display or scalar-related technologies
• Strong communication skills, with the ability to effectively convey technical concepts
• Desirable capability in system integration to facilitate seamless collaboration across different components and subsystems

Location: One North, Singapore

The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Job Description:

• To own, maintain and improve the following indices: Quality, Uptime and Cost.
• Sustain equipment KPI and make continuous improvements to enhance the performance.
• Monitor and control equipment performance indices. Optimize PM procedures to make it more effective and efficient.
• Coordinate with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Manage the expenditure allocated for equipment maintenance without compromising on quality output.
• Continuous improvement of equipment KPI in terms of quality, uptime and costs.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Coach and Mentor subordinates to ensure that skill level and knowledge are up to date, and continuously give feedback on their work performance.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Participate in CIP programs to optimize equipment utilization and cost of maintenance.
• Become the technical Expert for the respective machine specialization.
• Know how to use SPACE to monitor and analyze SPC charts. Know how to use JMP to analyze engineering experiments. Know how to use measurement instruments effectively in data collection.
• Understand FMEA and be able to generate FMEA analysis for new tool. Able to utilize it to identify tool weaknesses and derive the top 3 to 5 risk factors.
• Able to create PROMIS (SiView) DC OP and SPC charts.
• Coordinate new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production.
• Wafer scrap reduction awareness and mindset.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers.
• Self audit and update specifications to meet TS16949 Quality Standard requirements.
• Se expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager.

Job Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Materials / Material Sciences Engineering
• Min 5 years of relevant work experience in Photo Equipment (Track) in semiconductor industry
• Excellent communication, interpersonal and leadership skills
• Strong analytical skill and able to work under pressure in fast pace environment
• Proficient with MS Power Point, Excel, Excel VBA, Power BI

About SHOKZ

As the first bone conduction headset manufacturer in China, Shokz pioneered the foray into patented bone

conduction technology and has built itself as a world-renowned headphone brand with its signature open-ear

design. Utilising numerous patented acoustics and health technologies in areas like bone conduction and other

related acoustic technology, Shokz aims to accelerate the development of their True Wireless Stereo (“TWS”)

series and their bone-conduction hearing aid product line.

Job Scope:

1. Work as a market quality representative in Southeast Asia (Singapore, Malaysia, Thailand, etc.), collecting

quality information of client products (terminal products and POP display racks) through business trips and store

inspections, listing problem points and promoting internal improvement within the company, enhancing user

experience and satisfaction

2. Research the market return data and trends. Establish a product return model to measure the quality level of

the product market, and decompose responsibility for quality issues to each business unit based on physical

analysis to identify improvement opportunities

3. Bridge the gap between consumers and SHOKZ, dive deep into local stores and after-sales processes, identify

improvement & risk points, and promote SHOKZ's development

4. Other assigned tasks.

Job Requirement：

1. Bachelor's degree or above, majoring in science and engineering

2. Having excellent teamwork and communication coordination skills, having strong self motivation, able to flexibly respond to

changes

3. Located in a subsidiary in Singapore, required frequent business trips to Malaysia, Thailand, Japan, South Korea, and other

countries

5. Passionate about learning and sports.

SHOKZ (SINGAPORE) PTE. LTD.

Contact Person：Leon Li（HR Manager）

Email：[email protected]

Offcial Website：http://shokz.com

The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Provide 24x7 support for all Diffusion Wet Equipment Tools and Issues

Task:

• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness..
• Able to coach junior engineers in performing hardware trouble-shooting for daily operations
• Establish Preventive Maintenance (PM) plans for all implant equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Initiate meeting with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives and analyze low yield and WAT issues
• Establish stock levels of essential spare parts and consumables to support equipment maintenance based on forecasted manufacturing volume. Liaise with vendors to minimize / eliminate over-stock or under-stock
• Manage new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production
• Develop continuous improvement and Implement equipment improvement projects to improve equipment efficiency, cost reduction and reliability of equipment
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Set targets, goals, and projects for the section to minimize wafer scrap, equipment cost per wafer, optimize equipment capability and utilization to meet operational needs
• Provide feedback / training to AEs and TAs on their troubleshooting skills, equipment knowledge, decision making, risks assessment
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers
• Self audit and update specifications to meet TS16949 Quality Standard requirements
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager. Help the AE or Engineer on their career path development
• Provide long term solutions to address daily issues. Resolve department hardware chronicle issues.
• Create and maintain implant operation SOP and PM OI
• Develop continuous improvement to enhance equipment reliability and cost of ownership, Able to plan implant cost budget

Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Chemical / Material Science / Material Engineering
• Min 5 years of relevant work experience in Diffusion Clean Tech / Wet Equipment
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible for successful customers’ product full lifecycle, including but not limited to, technology transfers, new products introduction, device performance, yield, and reliability of our advanced technologies

Key Responsibilities

• Take charge for successful new products qualification and technology transfers from motherfab
• Complex data analysis to identify process design weaknesses and/or manufacturing tool issues.
• Design and execute experiments, analyse complex data sets and derive actionable insights to improve yield and performance for each specific technology and/or products
• Collaborate with the engineering teams to maintain process stability and provide technical solutions to customers

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Minimum of 2 years of experience in silicon process flow enhancements and managing process shifts, changes with design rules and product layout, ensuring optimal yield, electrical test and product performance with short-and long-term reliability implications considerations
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

Overview

We are seeking bright and friendly individuals with excellent communication skills, willingness to learn and apply new technology and a track record for providing great customer service. You will have opportunities to work in a variety of challenging IT environments to quickly build up your IT and communication skills.

What will you be doing?

As a Senior Service Engineer, you provide Level 1 and Level 2 Support to existing clients, serve as a primary contact to identify, troubleshoot and to provide resolutions to the reported issues. Your job is to work closely with R&D Team by conducting preliminary investigations i.e., replicating the reported issues raised and communicate to the support software engineers and Quality assurance engineers of your findings to facilitate in bug fixing.

Your responsibilities will include:

• Being a representative for project-specific customer inquiries and issues that you will take ownership and bring resolution.
• Ensure customer satisfaction in Project Support and Maintenance
• Collect information and perform deep-dive analysis, diagnosis, and troubleshoot.
• Commit to SLA for response and resolution, troubleshoot and perform root cause analysis of technical issues
• Communicate efficiently with the customer and the Internal R&D team on the bug fixes needed.
• Manages the status of issues raised and ensure they are resolved effectively in a timely manner.
• Continually evaluate existing processes to streamline and enhance customer support activities.
• Manage and keep tracks of change requests, bug fixes status and system updates deployments documentations.
• Prepare weekly statistic reports and able to present professionally in the weekly progress meetings with clients.
• Prepare and keep track of user manuals documentation and versions as well as release notes for upcoming enhancement releases.
• Conduct training / hand-holding sessions with users and to guide them to troubleshoot the system to resolve software issues or problems.

OK, I’m interested… is this the job for me?

We look for people who value agility, passion and teamwork; those who can bring fresh ideas to the table and want the opportunity to learn, grow, and expand their careers. Bring your aptitude and build upon what you do best for our customers, partners, team, and you.

Other qualities that you’ll need to be a fit for this role include:

• Degree in Information Technology/Computer Science/ Computer Engineering
• Preferably > 1 year experience in IT Industry managing large-scale applications support
• Pro-active, customer-focused, and comfortable dealing with clients/vendors directly.
• Excellent communication skills and the ability to interact professionally with a diverse group, executives, managers, and subject matter experts.
• Highly energetic, motivated team player, able to work under tight timelines and pressure to participate in digital transformation journey
• Good interpersonal skills, resourceful, take ownership
• Organized, meticulous, and able to work independently
• Strong analytical and troubleshooting skills
• Delivered B2B services effectively and efficiently, aware of service management preferred.
• Preference given to vendor–based software delivery experiences.
• Experience in Software Development and Microsoft SQL Server will be an advantage

Responsibilities:

• System and network setup, deploy and maintenance support for projects
• Provide technical proposals and deliver with quality standards and deadlines
• Provide technical guidance and expertise to the team, assisting with problem-solving and decision-making
• Participate and support cybersecurity risk assessment, hardening and VAPT
• Setup and conduct UAT test for system, storage, switches, router and firewall
• Perform system and network hardening, VAPT test and provide solutions to VAPT

Prerequisites:

• Degree in Information Technology, Computer Science or relevant disciplines
• Familiar and hands-on experience in design, setup, harden and deploy Windows/Linux OS, Storage and MSSQL server
• Familiar and hands-on experience in design, setup, harden and deploy Huawei/Cisco switches, router, FortiGate Firewall, NMS and MFA software
• Prepare system setup, deployment, manual and hardening documentations based on the project requirements
• Proficient in Cybersecurity principles, hardening methodologies, scripting and tools
• Possess CCNA, CISSP, Security+ , CISA certified will be a plus
• Willing to standby and attend projects' system issues during off office hours

Job Description:

•Check and analyse drawings, authority requirements and tender specifications

•Check site installation whether it is in accordance to design and standards

•Check and prepare for discrepancies of drawings to be highlighted to consultant

•Oversee the projects and follow the terms and conditions of contracts. Ensure compliance to contracts and the drawings with regulatory specifications

•Able to coordinate with owners, architects, consultants, project managers, sub-contractors and suppliers.

Job Requirements:

•Candidate has at least 2 years of working experiences that possess Degree in Construction, Civil Engineering and M&E or equivalent

•Entry level candidates are encouraged to apply, from recognized University by Singapore PE Board as training will be provided.

•Knowledgeable in basic Autocad software

•Able to handle construction projects with commitment on work

•Good in communication and written abilities

•Required skill : Able to use Microsoft Project to present schedule to the clients

Maxhunt Resource Pte Ltd | EA Licence: 22C1322
Loh Wing Sheng | Registration No: R22110239

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

About the Role:

To maintain the service education system for trainers and distributors. This includes training on repair processes, installation, maintenance, and troubleshooting, as well as introducing new products by preparing training schedules and materials. The role also involves promptly tracking technical inquiries and providing remote support to other Business Centres and distributors, ensuring that all administrative documentation is accurate and complete to enhance efficiency and service quality. Additionally, it includes planning and reviewing the Quality Management System to improve repair quality in the repair centre.

Roles and responsibilities:

• ·Conduct in-service training on medical devices and related products for trainers in other Business Centres and distributors, including:

o Repair processes (assembly and disassembly)

o Installation and maintenance processes

o Troubleshooting

• Prepare service training and manage the introduction of new product repairs, including training materials and schedules.
• Establish a service education system for medical devices and related products for engineers in other Business Centres.
• Address technical inquiries and provide technical support (installation, maintenance, etc.) to Business Centres and distributors, both remotely and on-site (e.g., at hospitals).
• Ensure proper documentation, notification, tracking, and follow-up on all technical inquiries.
• Support Business Centres and distributors with all service and technical-related inquiries and activities.
• Escalate issues to higher-level support when necessary and act as a contact point between Business Centres and headquarters.
• Plan and review the Quality Management Systems of repair centers to secure and enhance repair quality.
• Perform any other tasks as assigned.

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

• A competitive salary package including AWS and Variable Bonus
• Hybrid home office work arrangements
• 18 days of annual leave in your first year
• Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

• Diploma or Degree in any Electrical/Electronics/Mechanical Engineering Discipline
• At least 3 years of related experience in the medical device industry is highly preferred.
• Experience in technical support, including technical training.
• Experience with lean manufacturing and Six Sigma is preferred
• Strong hand-on skills and good eyesight.
• Willingness to travel to the Asia Pacific region if required.
• Proficient in the use of MS Office and its applications.
• Possess strong communication and troubleshooting skills.
• Able to work in a team environment and collaborate with staff across different age groups.
• A team player with enthusiasm for learning and the ability to work with minimal supervision.
• Strong troubleshooting and analytical skills.

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg

General information

As a Service Engineer, you will be responsible for executing Service work with low to medium complexity according to work instructions and in accordance with ABB standard processes, quality standards and safety guidelines.

Reporting to Service Manager, you will be delivering quality customer service to satisfy customers. In close co-operation with customer and other ABB teams, take actions to identify new Service business opportunities for ABB.

Health and Safety

• Apply safety rules and safe practices as well as environmental responsibilities
• Report unsafe practices and incidents

Service Delivery

• Execute after sales business activity preventive & condition based maintenance, trouble-shooting, repairs and commissioning.
• Actively coordinate with operation supervisors for optimal service potentials from regular customer interactions.
• Proactively involve in self learning and practical exposure for continuous competence and productivity improvement.
• Maintain high level of personal leadership on safety and quality on work performed as well as documentations.
• Reports early any technical/contract/quality/program/cost issues to management, along with recommendations for resolution.

Additional Requirement

• Understand customer needs & manage customer relationships
• Co-operate actively with other ABB units to achieve common targets
• Support sales team

Leadership

• Provide leadership and coordination for the service team
• Create and develop good team spirit

Continuous improvement

• Proactively identify area of improvement eg. Self-technical knowledge, job safety and etc
• Participate in discussion, meeting, training and e-learning

Your background

• Diploma, ITC or equivalent in Electrical/Electronics engineering with at least 3 years hands on repair and service experience on electrical equipment.
• Experience on LV & MV VFD will be an advantage
• Strong electrical or electronics engineering fundamental knowledge. Knowledge on theory, structure, application, testing methodology and component fault diagnosis/analysis will be added advantage.
• Strong self-discipline with initiative and learning spirit with positive attitude, team work and responsibility.