JOB HIGHLIGHTS

· Machine design in Mechanical aspect, Jig and Fixture, Equipment and development

· Provide Conceptual, mechanical part detailing and cost estimation

· BOM & machine manual writing

· Handle customers’ enquiries and issues

· Conduct machine acceptance with customer

· Co-ordination with sub-contractors for machine build

· Posses strong leadership quality and be self-motivated

· Experience in Solidwork 3D software to do mechanical design

· Good knowledge and experience in machine automation

REQUIREMENT

· Posses strong leadership quality and be self-motivated

· Experience in Solidwork 3D software to do mechanical design

· Good knowledge and experience in machine automation

· Able to work independently and within schedule

Job Descriptions

• Pre Project site evaluation of electrical product/meter location and perform range test
• Develops wiring diagrams, layout drawings, and as built drawings for system or equipment modifications or expansion and directs personnel performing installation and maintenance duties.
• Installation, testing and commissioning of repeaters or wireless devices
• Follow safe work procedures to remove/ Install electrical products/meter on site
• Conduct Testing and commissioning of installed electrical products
• Ensure Testing and Commissioning reports in proper order
• Preventive Maintenance (Thermoscan/ Eeprom Downloading/ Data/System Backup)
• Perform troubleshooting and perform appropriate corrective solutions for operational equipment where appropriate
• Soldering of electronics parts
• Internal wiring/ assembly of electrical products/meter
• Burning of firmware
• Testing of defective meters
• Project Coordination to ensure works being carry out as per schedule given by working with partners or contractors
• Manage enquiries, feedback and any other operational issues
• Carries out Site survey, Project management, documentation, testing, user training and commissioning
• To ensure timely completion of schedules and new projects start up through efficient coordination of all function groups both internal and external.
• Team player

Requirements:

• Minimum ITE, NTC/ITC, NITEC in Electrical Engineering or any similar qualifications
• Ability to read and comprehend electrical drawings
• Knowledge of firmware is a plus
• Ability to multi-task and effectively manage concurrent initiatives
• Strong interest in electronics engineering and firmware
• Ability to work effectively in a dynamic working environment.
• Applicant must be willing to work during weekend when required.
• Able to draw Autocad (Would be advantage)
• Minimum 3 years relevant experience

Only shortlisted candidates will be notified.

As a Software Engineer (C++ / C#), you will be a critical team member and fully responsible for developing graphics components for our products. In this role, you will work closely with product managers, UI-UX designers and the R&D team to collaboratively solve real-world problems.

What will you do

• Design, build and maintain efficient and reliable software modules for Screening Eagle software products.
• Develop tools for real-time interactive 3D graphics applications.
• Assist other team members to implement next generation NDT solutions.
• Collaborate with team members to integrate the components to desktop, mobile and web platforms end products.

What do we expect

• BA/MA/MS/PhD degree in Computer Science, Computer Graphics, or strong experience in 3D Games / 3D experiences.
• Proficiency in C++11 and above.
• Proficiency in C# and Unity.
• Good understanding of software design patterns.
• Good knowledge of data structures and algorithms for OOP.
• Good understanding of memory management in non-garbage collected environments.
• Familiar with memory and CPU usage optimization.
• Familiar with 3D graphics pipelines and optimization techniques.
• Solid linear algebra knowledge.Experience in developing for and integrating third party software on desktop, mobile and web tech stacks.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the Wet Etch modules.

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Roles & Responsibilities

About HOYA Surgical Optics (HSO)

HOYA Surgical Optics (HSO) is the globally leading Preloaded Intraocular Lens (IOL) focused company that provides technologies and solutions that exceed expectations, enabling ophthalmic surgeons to focus on restoring sight. We are dedicated to improving the vision and quality of life for millions of people suffering from cataract, and helping them celebrate life visually.

HSO empowers cataract surgeons all over the world with innovative ophthalmic devices and services, with an attention to detail that helps them achieve better surgical outcomes and better practice results. Our commitment to delivering these results is grounded upon a quality management system that is continuously improving to meet changing global regulatory requirements and our entrepreneurial drive to be the brand of first choice.

At HSO, People is the key factor to our success. We aim to create a conducive work environment for our employees around the globe, and to promote an inclusive culture based on our core values – Excellence, Passion, Innovative, Collaboration, and Accountability.

HSO way of working

In fulfilling our roles, we are

• Accountable for our own capabilities and development,
• Focused on delivering results without excuses, and
• Alive to the sensitivities, risk, and impact we have on others and work in a way that helps others do their work effectively.

We are looking for people who

• See beyond themselves and are impact-focused,
• Consider the needs, challenges, and objectives of every person with whom they interact, and
• Exhibit positive reinforcement to help others succeed.

About the role

Works closely with and has impact on: Support production and operational functions.

Reports to: Global Service Lead, Cloud & Data Centre

Function: Global IT

Work Location/Site: Singapore, Global Headquarters

Role Overview

The Senior Global Infrastructure Engineer is part of the Global Infrastructure and Operations Team to ensure the stability, security, and efficiency of IT infrastructure services globally. The role is responsible for overseeing and managing Organization’s Azure cloud and on-premises IT Infrastructure. This role requires a proactive individual with strong technical skills and project management.

Duties and Responsibilities

1. Azure Cloud Management

• Deploy, configure, and maintain Azure Virtual Machines to meet organizational requirements.
• Design, implement, and manage Azure virtual networks, subnets, and connectivity solutions.
• Deploy, configure, and maintain Azure storage.
• Manage Azure Backup and disaster recovery to protect critical data and systems.
• Administer and secure access to Azure resources using IAM best practices, policies, and RBAC configurations.
• Set up, manage, and optimize AVD environments.
• Configure and utilize Azure Monitor for performance tracking, log analytics, and proactive issue resolution.
• Develop and enforce governance standards using Azure Policy to maintain compliance across the organization.
• Monitor and optimize Azure resource utilization and cost.
• Ensure timely patching and updating of Azure-based resources to maintain security and compliance.

2. Window Server Administration

• Install, configure, and maintain Windows Servers in VMware environment to ensure service delivery.
• Continuously monitor and optimize windows server performance, perform configuration changes to ensure optimal functionality and minimize downtime.
• Manage server roles and features such as AD, DNS, DHCP and file services.
• Implement and enforce Group Policies to maintain security and compliance across systems.
• Perform regular system updates, apply patches and backups to keep systems secure.

3. Storage and backup

• Implement, maintain, monitor and troubleshoot storage issue for SAN and NAS.
• Monitor storage performance and capacity, perform optimizations to maintain efficiency.
• Implement, maintain, monitor and troubleshoot Veeam backup.
• Ensure compliance with data retention policies and regulations.

4. Project Management

• Leading the implementation of IT Infrastructure projects.
• Deliver project scope, and deliverables as per agreed schedule.
• Proactively coordinate and communicate with stakeholders and team members.

5. Documentation and Reporting

• Maintain comprehensive documentation of IT infrastructure and processes.
• Prepare regular reports on IT infrastructure availability, performance and project status.

Experience

• 8+ years of experience in IT infrastructure management.
• Professional certifications e.g. Azure Administrator Associate, Window Server Administration, and VCP are highly desirable.
• Strong technical expertise and hands-on experience in Azure infrastructure solutions.
• Strong technical expertise and hands-on experience in Window Server services, Domain Controller, VMware, Netapp storage, Veeam backup.
• Experience in Linux environment is a plus.
• Ability to express thoughts and complex IT solutions clearly and in a simplified manner.
• Excellent problem-solving and analytical skills.
• Proven experience managing infrastructure projects and out of the box thinking to resolve challenges.
• Strong communication and interpersonal skills.

Skills/Accreditations

• Fluency in Mandarin language is a plus.

Academic Qualifications

• Bachelor’s degree in Computer Science, Information Technology, or any diploma with an IT background

Travel requirements

• Occasional

*Position title and salary will be commensurate with relevant experience and qualifications.

By submitting your application, you consent to HOYA Group collecting, disclosing, and retaining your personal data for employment assessment and verification purposes.

If you are shortlisted, we will contact you within three weeks of your application. Thank you for your application and understanding.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

IC Designer, designing high frequency circuits targeting for transceiver applications, employing CMOS technology. The candidate needs to come up with novel architecture with speed, power, and area advantage compared to existing architecture.

The job also includes circuit design, pre and post-layout simulation, mask layout and PCB testing.

Qualifications

• Bachelor or Master degree in Electrical Engineering.
• Experience in EDA tools usage, including Cadence, Spectre, EMX, Synopsys, as well as Matlab.
• Some knowledge on communication system, such as BER, eye diagram, modulation/demodulation, pre-emphasis and etc.
• Open to Fixed Term Contract.

Job Description

• Takes the lead in identifying quality improvements and establish objectives to implement them
• Develop mechanical design drawings by applying sound engineering principles, with innovation, to meet design objectives
• Work with Sales team on conceptual design
• Review design to ensure product costing control and project schedule
• Ensure assigned machine must be test run before ship out handing over to customer
• Discuss and solve complex mechanical problems with manufacturing department, customers and suppliers

Job Requirements

• Diploma/Degree in Mechanical Engineering or equivalent
• Positive work attitude, willing to put in extra effort during peak period
• Able to work under tight schedule and under minimal supervision
• Strong communications skills
• Design experience in similar capacity, preferably in industrial Automation and Robotic Systems added advantage
• Working knowledge of Auto CAD
• Occasional travel maybe required

We regret that only shortlisted candidates will be notified.

Job Responsibilities

· Technical Support:Provide on-site technical support to customers, including troubleshooting, diagnostics, and repairs of hardware and software issues.

· Installation and Configuration: Install, configure, and test new hardware and software systems according to customer requirements.

· System Maintenance:Perform regular maintenance and updates on customer systems to ensure optimal performance and reliability.

· Customer Training:Train customers on how to use and maintain their systems effectively, including providing documentation and hands-on guidance.

· Issue Resolution:Respond promptly to customer inquiries and resolve issues in a timely manner, ensuring customer satisfaction.

· Documentation:Maintain accurate records of all work performed, including issue logs, service reports, and customer communications.

· Collaboration:Work closely with internal teams, including sales, support, and engineering, to ensure customer needs are met and to escalate issues as necessary.

Requirements:

Degree/Diploma in Computer or Electrical or Electronic Engineering or equivalent
Knowledge of programming in C,C++ are added advantages
Knowledge of embedded electronics fundamentals
Have knowledge of LoRaWAN and related IoT products are added advantages.
Have passion for exploratory testing and test automation are added advantages.
Able to work independently within tight schedule with positive disposition.
Excellent knowledge on Microsoft Office (Words, Excel & Powerpoint)
Fluent of English and Chinese in both speaking and writing

Job Description:
We are seeking a skilled Data Engineer with expertise in AWS cloud computing and database administration to join our team. In this role, you will design, implement, and manage scalable data solutions while maintaining and optimizing databases to ensure high performance and reliability..

Job Responsibilities:

• Design, deploy, maintain, and optimize database systems (Oracle, MySQL, SQL Server), including installation, configuration, backup, and recovery.
• Monitor and optimize database performance to improve response time, stability, and reliability.
• Plan and expand database capacity to ensure scalability and meet business requirements.
• Deploy and manage cloud infrastructure on AWS, including servers, networks, storage, and other resources, to provide a stable and reliable environment.
• Create, configure, and maintain AWS services to align with business needs, selecting appropriate services based on requirements.
• Implement and manage monitoring tools to track the performance and operational status of databases and AWS environments, proactively identifying and resolving potential issues.
• Collaborate with cross-functional teams to deliver efficient, scalable, and reliable cloud and database solutions.

Job Requirements:

• Bachelor’s degree or higher in Computer Science, Information Systems, or related fields.
• Minimum of 3+ years of experience in database administration (with hands-on experience in Oracle, MySQL, or SQL Server).
• Strong experience with AWS services and managing cloud infrastructure.
• In-depth knowledge of database performance tuning, troubleshooting, and optimization techniques.
• Familiarity with cloud networking concepts and using monitoring tools for AWS environments.
• Strong communication and problem-solving skills to handle technical challenges effectively.

Job Responsibilities:

Project Design and Development:

• Lead the design process for civil/structural engineering aspects of deep excavation projects.
• Develop detailed geotechnical design plans, ensuring compliance with relevant codes and regulations.
• Conduct engineering analyses, including stability assessments and structural integrity evaluations.

Technical Leadership:

• Provide technical guidance and mentorship to junior engineers and design teams.
• Review and approve design calculations, drawings, and specifications.
• Troubleshoot and resolve complex design and construction issues.

Stakeholder Collaboration:

• Collaborate with multidisciplinary teams, including architects, contractors, and project managers.
• Liaise with clients, regulatory authorities, and other stakeholders to ensure project requirements and standards are met.

Quality Assurance and Compliance:

• Ensure that designs meet local regulations, safety standards, and best practices.
• Participate in audits, inspections, and peer reviews of design work.

Project Management:

• Manage timelines, budgets, and resources for design deliverables.
• Support the preparation of technical reports and documentation.

Job Requirements:

• Bachelor’s or Master’s degree in Civil/Structural Engineering or a related discipline.
• Recognized professional engineering qualifications by the Professional Engineers Board of Singapore.
• A minimum of 10 years of relevant experience in civil/structural engineering, with at least 5 years focused on designing geotechnical works for deep excavation projects.
• Proven expertise in handling projects of a similar size and complexity.
• Strong knowledge of geotechnical design principles, soil mechanics, and structural analysis.
• Proficiency in relevant design software and tools (e.g., Plaxis, AutoCAD, STAAD.Pro).
• Excellent communication, leadership, and problem-solving skills.

Preferred Qualifications:

• Chartership or equivalent professional accreditation (e.g., PE, CEng).
• Familiarity with Singapore’s construction and regulatory environment.
• Experience with risk assessment and mitigation for geotechnical designs.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

This project aims to investigate the performance of cementitious materials and 3D printed concrete against ballistic impact. The researcher will be required to cast and fabricate the various cementitious materials and 3D printed concrete, prepare the logistics and perform the relevant ballistics tests.

Job Requirements

The research fellow should have at least 3 years relevant experience in the following two areas:
• 3D concrete printing;
• Conducting laboratory ballistic tests.

Job Overview

Do you want to further develop your analytical mind to pinpoint core issue and earn the satisfaction of resolving it ? Do you like working with fellow team members to improve your job routine and environment ? Do you crave job security and yet be at the frontier of technology?

Join us at UMC (SG), a leading global semiconductor foundry company manufacturing microchips for use in the present and for the future. In course of your work, you will learn internationally acclaimed analytical skills and techniques to apply in your work and personal life. Have the chance to work with engineers from other fields and process to resolve and improve current procedures.Seize the opportunity to take part at senior level in Quality improvement competition host in Taiwan national level and earn accolades as an elite engineer with awards and certification. Be recognized as an engineer of high calibre in Singapore and internationally.

Responsibilities

1. Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality and lot handling
2. Maintain Equipment capability for production and meet production demand
3. Engage with Production line and Process Engineers to balance tool availability for production, troubleshooting and scheduled maintenance
4. Engage in Equipment troubleshooting and production quality improvement.
5. Evaluation of new equipment/materials and retrofits of Equipment for better efficiency / production quality

Qualifications

1. Possess at least a Bachelor's Degree in engineering in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering ,Physics, Automation, Aerospace Engineering
2. Able to think critically with strong analytical skills
3. Possess good communication skills and time management skills
4. Prior leadership or competition experience in school activities will be an advantage
5. Must be willing to commit shift work
6. At least 2 years with relevant working experience in semiconductor industry foundry

Job Description:

• Lead the design and development of complex, scalable frontend applications.
• Mentor junior engineers and contribute to team growth.
• Collaborate with cross-functional teams to gather requirements and deliver solutions.
• Optimize frontend performance and ensure high-quality user experiences.
• Implement best practices for web accessibility and usability.
• Drive continuous improvement in development processes and tools.

Requirements:

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• 3-7 years of experience in frontend development, with a proven track record of delivering complex systems.
• Expertise in modern JavaScript frameworks and libraries (e.g., React, Angular, Vue.js).
• In-depth knowledge of CSS preprocessors (e.g., Sass, Less) and frontend build tools (e.g., Webpack, Vite).
• Familiarity with state management libraries (e.g., Redux, Vuex).
• Excellent communication and leadership skills.

Job Description:

• Architect and lead the development of high-performance, user-centric Android applications.
• Serve as a technical authority, providing guidance and expertise across projects.
• Collaborate with stakeholders to define technical roadmaps and strategies.
• Ensure application reliability, scalability, and maintainability.
• Conduct deep code reviews and maintain high-quality standards.
• Stay updated with emerging technologies and drive their adoption.

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Engineering, or a related field.
• 7+ years of experience in Android development, with experience in leading large-scale projects.
• Mastery of Kotlin, Java, and Android development frameworks.
• Extensive experience with performance optimization and profiling tools.
• Advanced knowledge of mobile security standards and practices.
• Proven experience in mentoring senior engineers and influencing technical direction.
• Strong strategic thinking and problem-solving skills.

The key functions of Process Engineer is to:

• Applies engineering principles and techniques to optimise the production processes in a manufacturing environment to meet organization objectives
• Analyse and troubleshoots process engineering, manufacturing and /or maintenance issues and recommends engineering solutions, and develops work instructions for out of control processes
• Leads production and manufacturing systems improvement projects, and develops operation plans in accordance with organization objectives and other regulatory requirements.

Job Description:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices
• Monitor critical SPC charts daily. Perform process window study and provide improvement plan to reduce OOC and improve CPK
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on passdown to troubleshoot process issues. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline. Work closely with the Equipment Engineer on new equipment acceptance. Know the concept of repeatability and reproducibility (R&R) run.
• Work on reducing process constraint so that Mfg can have more flexibility.
• Perform process matching between equipments to reduce variation and analysis / DOE to find factors for better tool matching.
• Participate in CIP programs to optimize process window, cost, yield, and productivity.
• Work as a team with both Equipment and Mfg Engineers to meet Module objectives. Work to meet the key indices of Uptime and OEE goals.
• Represent own Module to attend cross-functional task team to address yield improvement/ excursion issues. Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications/ documentation to meet TS16949 Quality Standard requirements.
• Follow good housekeeping and safety rules in office and FAB.
• Provide feedback/ training to AEs or Techs on their troubleshooting skills, understanding of processes, decision making, risk assessment.

Requirements:

• Degree in Electrical / Electronics / Mechanical /Microelectronics / Chemical Process / Chemistry / Physics/ Material Science/Material Engineering
• Min 7 years of relevant work experience in Etch Process or BEOL
• An excellent team player with good interpersonal, communication and written skills
• Strong leadership capabiity to lead and guide junior engineers
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are seeking a highly motivated Research Engineer to join our team, specializing in the hands-on experimentation and characterization of materials. The successful candidate will work closely with the research team to conduct materials characterization, perform electrochemical testing, and contribute to the development of innovative solutions for lithium battery recycling. This role requires a candidate with hands-on experience in material science techniques and electrochemical methods.
Key Responsibilities:

1. Perform experiments and characterization of materials using analytical techniques such as ICP, XRD, and FTIR.
2. Conduct electrochemical analysis, including cyclic voltammetry, LSV and other related techniques.
3. Prepare samples for testing and ensure proper calibration and maintenance of equipment.
4. Analyze and interpret experimental data, providing clear and concise reports to the research team.
5. Collaborate with cross-functional teams to ensure experimental objectives are achieved.
6. Maintain accurate records of experiments and uphold laboratory safety protocols.
7. Assist in troubleshooting and optimizing experimental procedures as needed.
8. Assist in lab procurement activities.

Qualifications

1. Bachelor’s or Master’s degree in Materials Science and Engineering, Chemical Engineering, or a related field.
2. Hands-on experience with material characterization techniques such as ICP, XRD, SEM and FTIR.
3. Proficiency in electrochemical methods is highly preferred.
4. Strong analytical and problem-solving skills with attention to detail.
5. Effective communication skills, both written and verbal, to document and present findings.
6. Ability to work independently as well as collaboratively within a team.
7. Knowledge of laboratory safety protocols and best practices.
8. Experience in data analysis and interpretation software (e.g., Origin).
9. Familiarity with additional characterization techniques is an added advantage.
10. Prior experience in an R&D or industrial laboratory setting.

OUR COMPANY

RegASK is an AI-driven solution enabling end-to-end intelligent regulatory workflow orchestration: automating regulatory intelligence with curated content and actionable insights, smart documentation and a connected community of over 1,700+ subject matter experts for streamlined regulatory execution globally. RegASK augments Regulatory Affairs teams, combining AI efficiency and community-driven intelligence to streamline compliance across the product lifecycle. The RegASK team is highly diverse, with more than 10 nationalities across 3 continents, entrepreneurial and very agile, We are currently recruiting highly motivated individuals to expand its team and support its ambitious growth plans.

If you are a doer who enjoys working across industries and continents, autonomous in your working style, and eager to problem solve, we would love to hear from you.

THE POSITION

Title: Senior Full Stack Engineer

We are seeking a Senior Full Stack Engineer to work closely with the product team in order to translate their requirements and stories to web applications and functionalities in the platform.

In this role, you will benefit from the mentorship of highly skilled experts and you will be working in a fast-paced environment managing multiple projects at once, which involve stakeholders across the company.

Responsibilities:

• Join the product development team to help translate the requirements and designs into web applications or services using Node.js, Express, React, Mongo and other tools/frameworks as required
• Build scalable architectures to meet different use cases
• Work with QA team to create unit and integration tests to ensure code quality
• Weigh in on feasibility and timelines for feature development and development milestones
• Take charge of existing code base and help refactoring to meet standards where required
• Ensure proper and adequate documentation
• Align to the company’s Culture and show great team work abilities

Requirements:

• 8-10 years of experience, building web applications and services
• 3-5 years of experience with MERN stack, Python a plus
• Experience with production grade deployment a plus
• Ability to work collaboratively
• An eye for detail and the ability to develop adaptive code that can keep up with new requirements
• Strong communication skills

If you are excited about this opportunity and believe you have the skills and qualifications to excel as our Senior Full Stack Engineer, please submit your resume for consideration.

We appreciate all applications, but only selected candidates will be contacted for an interview.

Thank you for considering joining the RegASK team. We look forward to reviewing your application!

About us

Green Link Digital Bank is Singapore's inaugural wholesale digital bank focusing on supply chain finance, mainly serving MSMEs and aiming to help MSMEs grow and improve digitization.

We are looking for an Application Support Engineer to join our exciting team, to play a pivotal role in our banking technology division, responsible for ensuring the reliability, performance, and availability of critical banking applications.

Responsibilities

• Oversee the bank’s portfolio of applications, ensuring their stability, availability, and performance.
• Hands-on work on technical issue troubleshooting and ensure application functionality.
• Participate in the planning and execution of application upgrades and enhancements.
• Monitor system performance, track incidents, and proactively address potential issues.
• Ensure compliance with regulatory and security requirements for banking application.
• Continuously work towards making improvements in the release process.
• Provide regular reports on application support metrics and key performance indicators (KPIs).
• Support project team on DEV, SIT and UAT environment deployment and troubleshooting.
• Familiar with ITIL based Bank IT process, especially on incident, problem and change management.

Requirements

• Bachelor’s degree in computer science, Computer Engineering, Electrical Engineering, or related fields.
• 3 years of Technical/Application Support experience on multi technology platforms.
• Good knowledge on Linux OS, Windows Server, PostgreSQL, SQL Server, Oracle.
• Cross-platform experience and the expertise to identify and resolve integration issues.
• Excellent understanding of the CI/CD practice.
• Familiar with application release methodology.
• Experience in software development lifecycle and agile development methodologies.
• Experience working in a financial services institution with understanding of MAS technology risk requirements.
• Highly self-motivated to excel in assigned tasks and to deliver results for a digital bank.
• Good communication and coordination skills.
• Hands-on development experience is a plus.
• Excited to work in a fast-paced environment.

Software Engineer (SAP Specialist)

Responsibilities:

• Provide SAP Techno-functional Support in FI/CO or SD/MM/PM modules.
• Involve in analysis, design, coding / configuration and testing of SAP System.
• Work with business users to understand their business requirements
• Develop interfaces between SAP with external systems.
• Analyse the software issues, diagnoses the technical faults and suggest the precaution measures along with accurate troubleshooting methodologies
• Ensure safety practices and housekeeping is to be maintained to the highest standard

Requirements:

• Possess a Diploma/Degree in Computer Science / Information Technology or equivalent
• Knowledgeable in SAP and programming languages such as ABAP.
• Good interpersonal, analytical and problem-solving skills
• Minimum 2-3 years of relevant working experience is required

Roles and Responsibilities:

• Ability to effectively communicate with technical and non-technical groups, both internal and external (App owner, developers, Appian team)
• Platform Management (OS, VM, Diskspace, CPUs related resources etc.)
• Ability to identify, resolve and recommend solutions to problems.
• Oversee the day-to-day administration of the Appian platform, ensuring it is operational and performing efficiently.
• Coordination between Customer SMEs and Appian to get required access
  Install, Configure and Managing the organization’s APPIAN BPM- related application and manage deployments, administration, troubleshooting, maintenance, and technical support activities.
• Stay current with Appian updates, patches, and releases, and plan and execute upgrades when necessary.
• Application Server (i.e. JBoss or WebLogic) downloaded from respective licensed Site
• Web Server downloaded from Web Server site (if required).
• Web Server installation & configuration (if required).
• Appian downloaded from Appian communityTemporary license download from Appian community
• In addition, all the required s/w packages (jdk, DB) can be downloaded from the authenticated sources.
• Appian and Application server installation & configuration
• Installation of the required database as per the Appian compatibility
• Integration of the Appian and Application server and Data base server
• Platform(Appian) Health check
• Monitor the performance of system components and transactions.
• Monitor business process execution and data associated with those processes.
• User Access Management

Logs Management

• Management of integrations with other systems like integrations with LDAP for access authentication
• Work on the tickets (service request) with respect to platform
• Environment (Appian instance, Application Server JVM) Restart/stop/start
• Strong problem-solving and troubleshooting skills to address platform issues
• Research and resolve assigned incidents/requests related to Appian environments.
• Involvement in Change/Configuration management related to Appian environments changes.
• Implement data backup and disaster recovery strategies to safeguard against data loss or system failures.

As a Cloud DevOps Engineer, you will run and support the company’s software application infrastructure in the cloud, ensuring the optimized use of resources to scale.

What will you do

• Design, develop, and implement cloud infrastructure as code using Terraform.
• Manage and optimize cloud resources for cost-efficiency and performance.
• Secure infrastructure by implementing best practices and adhering to security compliance standards.
• Implement robust monitoring and alerting systems for infrastructure resources.
• Collaborate with developers and operations teams to integrate infrastructure changes seamlessly into the software development lifecycle.
• Champion DevOps best practices for cloud infrastructure management.
• Setup, monitor and support CI/CD pipeline on premise or in the cloud.
• Stay up to date on the latest AWS services and Terraform features.

What do we expect

• Proven experience as a DevOps Engineer with at least 3 years of experience (with a focus on AWS cloud infrastructure).
• Implementation proficiency in service control policy and account governance (Control Tower, OU management, etc.).
• Enable and configure AWS VPC flow logs, load balancer logging, direct connect, AWS VPN, TGX etc.
• Experience managing Unix/Linux environments.
• Extensive experience in scripting in languages such as Python/Ruby/Perl and shell scripting.
• In-depth knowledge and experience with AWS services (EC2, S3, VPC, IAM, etc.).
• Expert-level proficiency in Terraform, including writing reusable modules and leveraging best practices.
• Able to troubleshoot infrastructure issues in cloud, identify root cause and implementation improvement and fixes.
• Good knowledge of microservices architecture, container technologies (Docker, Kubernetes).
• Expertise in Git and GitOps philosophy.
• Good people skills, teamwork, collaboration with cross function and cross-geo teams.
• Self-motivated, willing to learn new technologies continuously.
• Maintain documentation for design, integration, testing, and deployment.

Good to have

• Relevant DevOps certifications (e.g. AWS).
• Some experience with other cloud providers like Azure and GCP.
• Experience with CI/CD pipelines and integrating infrastructure provisioning with development workflows.
• Knowledge on mobile and web applications development.
• Knowledge of big data and data analytics infrastructure in cloud.

Position: Senior/ Junior Software Engineer

Campus: DigiPen (Singapore)

Description:

We are hiring a team of software engineers to design and develop software platforms for supporting multi-user AR/VR applications.

Salary Package for 2 years:

• Salary range: $4,000 - $8,000 per month
• 13th-month bonus
• Health and dental insurance

Role:

• Design and develop AR/VR software solutions for online education, team collaboration, and workplace training with a focus on real-time interactive simulation.
• Build infrastructure for real-time interactions, scripting tools, backend web services, and frontend applications.
• Design and implement spatial interactions using 3D game engines, modelling animation tools and shader programming

Educational and Experience Requirements:

• A degree in Computer Science or relevant field
• Strong knowledge in C++
• 3D engine development experience
• Familiarity with core engine technologies such as engine architecture, multi-threading, streaming, computer graphics and advanced real-time rendering techniques
• Experience developing optimized modules in C#/C++ within Unity and/or Unreal Engine
• Experience with database management systems
• Experience with software development life cycle
• At least 5 years of work experience in a similar capacity to qualify for the senior position

Application:

To apply, please submit your updated resume and relevant portfolio with the subject line “Senior/ Junior Software Engineer” sent to:

Dr. Tang Liang

Associate Dean of Academic

Email: singapore-jobs(at)digipen.edu

About the Role:

To maintain the service education system for trainers and distributors. This includes training on repair processes, installation, maintenance, and troubleshooting, as well as introducing new products by preparing training schedules and materials. The role also involves promptly tracking technical inquiries and providing remote support to other Business Centres and distributors, ensuring that all administrative documentation is accurate and complete to enhance efficiency and service quality. Additionally, it includes planning and reviewing the Quality Management System to improve repair quality in the repair centre.

Roles and responsibilities:

• ·Conduct in-service training on medical devices and related products for trainers in other Business Centres and distributors, including:

o Repair processes (assembly and disassembly)

o Installation and maintenance processes

o Troubleshooting

• Prepare service training and manage the introduction of new product repairs, including training materials and schedules.
• Establish a service education system for medical devices and related products for engineers in other Business Centres.
• Address technical inquiries and provide technical support (installation, maintenance, etc.) to Business Centres and distributors, both remotely and on-site (e.g., at hospitals).
• Ensure proper documentation, notification, tracking, and follow-up on all technical inquiries.
• Support Business Centres and distributors with all service and technical-related inquiries and activities.
• Escalate issues to higher-level support when necessary and act as a contact point between Business Centres and headquarters.
• Plan and review the Quality Management Systems of repair centers to secure and enhance repair quality.
• Perform any other tasks as assigned.

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

• A competitive salary package including AWS and Variable Bonus
• Hybrid home office work arrangements
• 18 days of annual leave in your first year
• Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

• Diploma or Degree in any Electrical/Electronics/Mechanical Engineering Discipline
• At least 3 years of related experience in the medical device industry is highly preferred.
• Experience in technical support, including technical training.
• Experience with lean manufacturing and Six Sigma is preferred
• Strong hand-on skills and good eyesight.
• Willingness to travel to the Asia Pacific region if required.
• Proficient in the use of MS Office and its applications.
• Possess strong communication and troubleshooting skills.
• Able to work in a team environment and collaborate with staff across different age groups.
• A team player with enthusiasm for learning and the ability to work with minimal supervision.
• Strong troubleshooting and analytical skills.

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg

General information

As a Service Engineer, you will be responsible for executing Service work with low to medium complexity according to work instructions and in accordance with ABB standard processes, quality standards and safety guidelines.

Reporting to Service Manager, you will be delivering quality customer service to satisfy customers. In close co-operation with customer and other ABB teams, take actions to identify new Service business opportunities for ABB.

Health and Safety

• Apply safety rules and safe practices as well as environmental responsibilities
• Report unsafe practices and incidents

Service Delivery

• Execute after sales business activity preventive & condition based maintenance, trouble-shooting, repairs and commissioning.
• Actively coordinate with operation supervisors for optimal service potentials from regular customer interactions.
• Proactively involve in self learning and practical exposure for continuous competence and productivity improvement.
• Maintain high level of personal leadership on safety and quality on work performed as well as documentations.
• Reports early any technical/contract/quality/program/cost issues to management, along with recommendations for resolution.

Additional Requirement

• Understand customer needs & manage customer relationships
• Co-operate actively with other ABB units to achieve common targets
• Support sales team

Leadership

• Provide leadership and coordination for the service team
• Create and develop good team spirit

Continuous improvement

• Proactively identify area of improvement eg. Self-technical knowledge, job safety and etc
• Participate in discussion, meeting, training and e-learning

Your background

• Diploma, ITC or equivalent in Electrical/Electronics engineering with at least 3 years hands on repair and service experience on electrical equipment.
• Experience on LV & MV VFD will be an advantage
• Strong electrical or electronics engineering fundamental knowledge. Knowledge on theory, structure, application, testing methodology and component fault diagnosis/analysis will be added advantage.
• Strong self-discipline with initiative and learning spirit with positive attitude, team work and responsibility.

Founded in 2006, IGG is a leading global mobile games developer and publisher committed to making amazing innovative games for players all over the world. Our games are available in 23 different languages, and are enjoyed by 38 million monthly active users from over 200 countries and regions.

At IGG, we are innovators at work, gamers at heart.

We are currently looking for a Server Programmer to join our energetic team in Singapore!

Job description

· Work on server or network related tasks that include but not limited to mobile game server architecture design, modular design, game server end program logic development and maintenance efforts

· Develop game services and supporting applications

· Assess, develop, test, debug, and maintain game services

· Propose creative solutions to meet product goals

· Work effectively in cross-functional teams and collaborate with internal and remote teams to identify, produce, and deliver tasks on time

Job requirements:

· Degree in Computer Science or related field

· 3+ years’ experience in the mobile games industry or equivalent

· Experience with all phases of product development lifecycle, including requirement definition, development, testing, releasing of product(s) and live operations

· Expert in C/C++ is a must, familiarity with C++ as server framework is a plus

· Expert on network protocols: Socket programming, TCP, UDP, HTTP

· Solid understanding of distributed systems and micro service development (SOA, SaaS)

· Expert on SQL and relational database operation

· Preferably with understanding of Unity game engine and C#

· Preferably with Git-related experiences

· Preferably with solid understanding of functional and reactive programming

· Preferably with experience in developing mobile games (iOS & Andriod)

· Familiarity with client server data synchronization (e.g. state/frame synchronization) is a plus

· Familiarity with Golang, protocol buffers would be a plus