Job Description

• Undertake detailed design in one or more of the following field of expertise: Civil (drainage, sewage), Bridge/Tunnel, Underground Excavation and Tunnelling works
• Execution of projects and liaison with the Client, Client’s Consultants, Contractor, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Analysis on structural components using various engineering software

Requirements

• Degree in Civil and Structural Engineering or its equivalent
• Prefer degree recognized by the Professional Engineers Board of Singapore for Associate level
• Minimum 5 years relevant experience
• Good exposure in the analysis and design of geotechnical works, concrete structures, steel structures, civil works, or soil-structure interactions
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

Responsibilities

• Lead a team of line leaders and operators to meet daily production output, quality, productivity and yield.

• Conduct daily pass-down meetings and escalate line issues if any

• Oversee manpower/overtime and consumables planning

• Ensure manufacturing and safety procedures are being followed

• Conduct training/coaching to leaders & operators to improve performance

• Implement ideas and improvement activities to prevent human errors

• Ensure good discipline and housekeeping in the line

• Coordinate with other departments to support projects, evaluations and preventive maintenance activities in the fab

Requirements

• Diploma/Degree in Engineering/Science/Production/IT

• Preferably experienced in high-tech, high-vol manufacturing environment

• Good leadership and communication skills

• Willing to work 12-hour shifts (day or night)

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

We are looking for an experienced AI Engineer with solid knowledge and experience in developing AI/ML systems, to accelerate incubation and delivery of new AI/ML based media and business capabilities.

You will be working with other engineers in the team to research, experiment, and build AL/ML models & algorithms utilizing various of data sources. You will be one of the problem solvers who utilises technology to address complex business needs.

The role reports to the AI Products & Solutions Lead and will work closely with other product teams within the digital department.

Responsibilities

• Implement scalable and robust AI/ML systems computing on large volumes of datasets using a variety of open source and proprietary Data Science technologies.
• Implement and integrate system components for service orchestration, scheduling, job status monitoring, model performance monitoring, failure recovery, APIs, and any other components required for a robust and reliable Machine Learning system spanning on-premises and cloud environments.
• Develop and implement data processing jobs and pipelines to provide standard, continuous, and scalable data input for future analytics and modelling needs.
• Write and automate unit, functional, integration and performance tests in a Continuous Integration environment.
• Work closely with stakeholders to ensure high standards of data governance during implementation.

• Bachelor's degree in Computer Science, Computer Engineering or related fields.
• 5+ years of software development experience with 3+ years in developing end-to-end AI/ML applications.
• Excellence in algorithms, data structure, discrete math, and distributed computing.
• Full stack experience in data collection, aggregation, analysis, visualization, and monitoring of AI/ML products (MLOps).
• Experience with basic software development skills, such as agile methodologies, testing, version control, and CI/CD.
• Proficiency in Programming languages (Python, Java, etc).
• Experience with Cloud Infrastructure, Kubernetes, Docker, GPU, TensorFlow, Pytorch & other Opensource AI/ML framework and libraries.
• Experience with SQL and/or NoSQL database.
• Experience working in Media & Entertainment industry is a strong plus.
• Self-directed, ability to work independently and research innovative solutions to technical and business problems.

Responsibilities of Process Engineer

· Process Technology development for Silicon wafer manufacturing

· Manage wafer manufacturing process in achieving quality, yield, quality and production targets.

· Collaborate with Technology counterparts globally on process alignment and qualification of new processes, suppliers and consumables if needed

· Work with cross-functional teams on process capability improvement and yield enhancement projects

· Coordinate troubleshooting of process issues and yield losses

· Drive for continuous process improvement and permanent solutions to resolve chronic process and quality issues.

· Develop best practices, routines and innovative solutions for continuous improvement

· Perform Statistical data analysis for process improvement and interpretation of data

· Apply problem solving methods (8D, Fishbone, DOE etc.) and risk analysis (like FMEA)

Requirements of Process Engineer

· University degree in Engineering or Science

· Min. 3 years relevant semicon/ manufacturing experience

· Knowledge of quality management systems, data analysis, Design of Experiments (DOE) and statistical process control (SPC)

· Proficient in statistical software like JMP, visual basic, database and queries will be an added advantage

· Self-motivated and able to work well in a team

· Good analytical and communication skills

· Willingness and curiosity to learn attitude

The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Provide 24x7 support for all Diffusion Wet Equipment Tools and Issues

Task:

• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness..
• Able to coach junior engineers in performing hardware trouble-shooting for daily operations
• Establish Preventive Maintenance (PM) plans for all implant equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Initiate meeting with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives and analyze low yield and WAT issues
• Establish stock levels of essential spare parts and consumables to support equipment maintenance based on forecasted manufacturing volume. Liaise with vendors to minimize / eliminate over-stock or under-stock
• Manage new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production
• Develop continuous improvement and Implement equipment improvement projects to improve equipment efficiency, cost reduction and reliability of equipment
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Set targets, goals, and projects for the section to minimize wafer scrap, equipment cost per wafer, optimize equipment capability and utilization to meet operational needs
• Provide feedback / training to AEs and TAs on their troubleshooting skills, equipment knowledge, decision making, risks assessment
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers
• Self audit and update specifications to meet TS16949 Quality Standard requirements
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager. Help the AE or Engineer on their career path development
• Provide long term solutions to address daily issues. Resolve department hardware chronicle issues.
• Create and maintain implant operation SOP and PM OI
• Develop continuous improvement to enhance equipment reliability and cost of ownership, Able to plan implant cost budget

Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Chemical / Material Science / Material Engineering
• Min 5 years of relevant work experience in Diffusion Clean Tech / Wet Equipment
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

About SHOKZ

As the first bone conduction headset manufacturer in China, Shokz pioneered the foray into patented bone

conduction technology and has built itself as a world-renowned headphone brand with its signature open-ear

design. Utilising numerous patented acoustics and health technologies in areas like bone conduction and other

related acoustic technology, Shokz aims to accelerate the development of their True Wireless Stereo (“TWS”)

series and their bone-conduction hearing aid product line.

Job Scope:

1. Work as a market quality representative in Southeast Asia (Singapore, Malaysia, Thailand, etc.), collecting

quality information of client products (terminal products and POP display racks) through business trips and store

inspections, listing problem points and promoting internal improvement within the company, enhancing user

experience and satisfaction

2. Research the market return data and trends. Establish a product return model to measure the quality level of

the product market, and decompose responsibility for quality issues to each business unit based on physical

analysis to identify improvement opportunities

3. Bridge the gap between consumers and SHOKZ, dive deep into local stores and after-sales processes, identify

improvement & risk points, and promote SHOKZ's development

4. Other assigned tasks.

Job Requirement：

1. Bachelor's degree or above, majoring in science and engineering

2. Having excellent teamwork and communication coordination skills, having strong self motivation, able to flexibly respond to

changes

3. Located in a subsidiary in Singapore, required frequent business trips to Malaysia, Thailand, Japan, South Korea, and other

countries

5. Passionate about learning and sports.

SHOKZ (SINGAPORE) PTE. LTD.

Contact Person：Leon Li（HR Manager）

Email：[email protected]

Offcial Website：http://shokz.com

What you will do

• Customer support responsibilities, ensuring timely and effective resolution of customer inquiries and issues
• Project management involvement, including planning, execution, and delivery
• Support marketing promotion activities to enhance product visibility and market presence
• Engage in clear and effective communication with customers to address their needs and concerns
• Aid in debugging and testing to ensure product quality and reliability

Required Skills

• Excellent proficiency in English and Mandarin, both written and verbal, to liaise with our affiliates from different regions.
• Preferred experience in display or scalar-related technologies
• Strong communication skills, with the ability to effectively convey technical concepts
• Desirable capability in system integration to facilitate seamless collaboration across different components and subsystems

Location: One North, Singapore

The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Job Description:

• To own, maintain and improve the following indices: Quality, Uptime and Cost.
• Sustain equipment KPI and make continuous improvements to enhance the performance.
• Monitor and control equipment performance indices. Optimize PM procedures to make it more effective and efficient.
• Coordinate with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Manage the expenditure allocated for equipment maintenance without compromising on quality output.
• Continuous improvement of equipment KPI in terms of quality, uptime and costs.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Coach and Mentor subordinates to ensure that skill level and knowledge are up to date, and continuously give feedback on their work performance.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Participate in CIP programs to optimize equipment utilization and cost of maintenance.
• Become the technical Expert for the respective machine specialization.
• Know how to use SPACE to monitor and analyze SPC charts. Know how to use JMP to analyze engineering experiments. Know how to use measurement instruments effectively in data collection.
• Understand FMEA and be able to generate FMEA analysis for new tool. Able to utilize it to identify tool weaknesses and derive the top 3 to 5 risk factors.
• Able to create PROMIS (SiView) DC OP and SPC charts.
• Coordinate new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production.
• Wafer scrap reduction awareness and mindset.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers.
• Self audit and update specifications to meet TS16949 Quality Standard requirements.
• Se expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager.

Job Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Materials / Material Sciences Engineering
• Min 5 years of relevant work experience in Photo Equipment (Track) in semiconductor industry
• Excellent communication, interpersonal and leadership skills
• Strong analytical skill and able to work under pressure in fast pace environment
• Proficient with MS Power Point, Excel, Excel VBA, Power BI

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

About the Role:

To maintain the service education system for trainers and distributors. This includes training on repair processes, installation, maintenance, and troubleshooting, as well as introducing new products by preparing training schedules and materials. The role also involves promptly tracking technical inquiries and providing remote support to other Business Centres and distributors, ensuring that all administrative documentation is accurate and complete to enhance efficiency and service quality. Additionally, it includes planning and reviewing the Quality Management System to improve repair quality in the repair centre.

Roles and responsibilities:

• ·Conduct in-service training on medical devices and related products for trainers in other Business Centres and distributors, including:

o Repair processes (assembly and disassembly)

o Installation and maintenance processes

o Troubleshooting

• Prepare service training and manage the introduction of new product repairs, including training materials and schedules.
• Establish a service education system for medical devices and related products for engineers in other Business Centres.
• Address technical inquiries and provide technical support (installation, maintenance, etc.) to Business Centres and distributors, both remotely and on-site (e.g., at hospitals).
• Ensure proper documentation, notification, tracking, and follow-up on all technical inquiries.
• Support Business Centres and distributors with all service and technical-related inquiries and activities.
• Escalate issues to higher-level support when necessary and act as a contact point between Business Centres and headquarters.
• Plan and review the Quality Management Systems of repair centers to secure and enhance repair quality.
• Perform any other tasks as assigned.

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

• A competitive salary package including AWS and Variable Bonus
• Hybrid home office work arrangements
• 18 days of annual leave in your first year
• Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

• Diploma or Degree in any Electrical/Electronics/Mechanical Engineering Discipline
• At least 3 years of related experience in the medical device industry is highly preferred.
• Experience in technical support, including technical training.
• Experience with lean manufacturing and Six Sigma is preferred
• Strong hand-on skills and good eyesight.
• Willingness to travel to the Asia Pacific region if required.
• Proficient in the use of MS Office and its applications.
• Possess strong communication and troubleshooting skills.
• Able to work in a team environment and collaborate with staff across different age groups.
• A team player with enthusiasm for learning and the ability to work with minimal supervision.
• Strong troubleshooting and analytical skills.

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg

General information

As a Service Engineer, you will be responsible for executing Service work with low to medium complexity according to work instructions and in accordance with ABB standard processes, quality standards and safety guidelines.

Reporting to Service Manager, you will be delivering quality customer service to satisfy customers. In close co-operation with customer and other ABB teams, take actions to identify new Service business opportunities for ABB.

Health and Safety

• Apply safety rules and safe practices as well as environmental responsibilities
• Report unsafe practices and incidents

Service Delivery

• Execute after sales business activity preventive & condition based maintenance, trouble-shooting, repairs and commissioning.
• Actively coordinate with operation supervisors for optimal service potentials from regular customer interactions.
• Proactively involve in self learning and practical exposure for continuous competence and productivity improvement.
• Maintain high level of personal leadership on safety and quality on work performed as well as documentations.
• Reports early any technical/contract/quality/program/cost issues to management, along with recommendations for resolution.

Additional Requirement

• Understand customer needs & manage customer relationships
• Co-operate actively with other ABB units to achieve common targets
• Support sales team

Leadership

• Provide leadership and coordination for the service team
• Create and develop good team spirit

Continuous improvement

• Proactively identify area of improvement eg. Self-technical knowledge, job safety and etc
• Participate in discussion, meeting, training and e-learning

Your background

• Diploma, ITC or equivalent in Electrical/Electronics engineering with at least 3 years hands on repair and service experience on electrical equipment.
• Experience on LV & MV VFD will be an advantage
• Strong electrical or electronics engineering fundamental knowledge. Knowledge on theory, structure, application, testing methodology and component fault diagnosis/analysis will be added advantage.
• Strong self-discipline with initiative and learning spirit with positive attitude, team work and responsibility.

Founded in 2006, IGG is a leading global mobile games developer and publisher committed to making amazing innovative games for players all over the world. Our games are available in 23 different languages, and are enjoyed by 38 million monthly active users from over 200 countries and regions.

At IGG, we are innovators at work, gamers at heart.

We are currently looking for a Server Programmer to join our energetic team in Singapore!

Job description

· Work on server or network related tasks that include but not limited to mobile game server architecture design, modular design, game server end program logic development and maintenance efforts

· Develop game services and supporting applications

· Assess, develop, test, debug, and maintain game services

· Propose creative solutions to meet product goals

· Work effectively in cross-functional teams and collaborate with internal and remote teams to identify, produce, and deliver tasks on time

Job requirements:

· Degree in Computer Science or related field

· 3+ years’ experience in the mobile games industry or equivalent

· Experience with all phases of product development lifecycle, including requirement definition, development, testing, releasing of product(s) and live operations

· Expert in C/C++ is a must, familiarity with C++ as server framework is a plus

· Expert on network protocols: Socket programming, TCP, UDP, HTTP

· Solid understanding of distributed systems and micro service development (SOA, SaaS)

· Expert on SQL and relational database operation

· Preferably with understanding of Unity game engine and C#

· Preferably with Git-related experiences

· Preferably with solid understanding of functional and reactive programming

· Preferably with experience in developing mobile games (iOS & Andriod)

· Familiarity with client server data synchronization (e.g. state/frame synchronization) is a plus

· Familiarity with Golang, protocol buffers would be a plus

Job Responsibilities:

• 2.5D/3DIC platform development.
• New unit module development and devices development.
• New process verification and qualification.
• New platform DSM setup
• Customer engagement and new product verification

Capability

• Solid semiconductor process integration and device characterization skills
• Semiconductor device physics and analysis skill.
• Experienced in 2.5D and 3DIC process development are plus.
• Skill on FMEA, control plan, DOE (design of experiment) and problem solving.
• Good communication, self-motived and avid learner

Qualification

• At least bachelor degree in microelectronics/electronics/electrical/physics/Materials engineering or other relevant fields.
• At least 7 years working experience in semiconductor R&D or related foundry experience of integration/process/device engineer.
• Working experience: 2.5D and 3DIC integration and device background are plus.
• Proficient English oral and writing skill.

Overview

We are looking for result-driven candidates who would thrive under a fast-pace working environment and having a strong desire to make an impact in their organization.

What you will do

• Own the entire layout implementation process: schedule estimation, floorplanning, layout construction, physical verification and memory compiler leaf-cell creation
• Implement top quality layout which meet the specifications set forth by designers and layout leads while meeting the project objectives and milestones
• Diligently perform all physical & reliability verifications (DRC/LVS/ERC/etc.) on the layout designs and ensure the database is fully compliant with all requirements of tape-out flow
• Work closely with multi-functional members to optimize layout realization according to the desired power, performance and area optimization requirement
• Candidates with strong soft skills could be tasked to undertake project management, coaching of new hires/interns or workflow improvement initiative

What you bring

• Bachelor’s degree in Electrical/Electronic/Computer Engineering or equivalent
• WIth direct experience in custom Memory layout implementation (SRAM/ROM/TCAM/CIM) in advanced finFET/GAA process nodes
• Proficient in understanding DRM of advanced CMOS technologies and have a good understanding of deep sub-micron and DFM issues (eg. WPE, LOD effects, etc.)
• Strong knowledge in floor-planningtechniques at different hierarchies, with emphasis on power mesh planning, critical block placement, critical signal routing and top-down integrationflow
• Strong knowledge in executing and debugging various physical verification checks like DRC, LVS, ERC, Antenna, Density, ESD, LUP, EM, IR, etc
• Proficient in Synopsys/Cadence layout editors
• Ability in script programming (eg. Python, Tcl, Perl or C-shell) is a plus
• Team player and effective in cross-team communication and time management

Location: One North, Singapore

Why MediaTek

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

Overview

We are seeking bright and friendly individuals with excellent communication skills, willingness to learn and apply new technology and a track record for providing great customer service. You will have opportunities to work in a variety of challenging IT environments to quickly build up your IT and communication skills.

What will you be doing?

As a Senior Service Engineer, you provide Level 1 and Level 2 Support to existing clients, serve as a primary contact to identify, troubleshoot and to provide resolutions to the reported issues. Your job is to work closely with R&D Team by conducting preliminary investigations i.e., replicating the reported issues raised and communicate to the support software engineers and Quality assurance engineers of your findings to facilitate in bug fixing.

Your responsibilities will include:

• Being a representative for project-specific customer inquiries and issues that you will take ownership and bring resolution.
• Ensure customer satisfaction in Project Support and Maintenance
• Collect information and perform deep-dive analysis, diagnosis, and troubleshoot.
• Commit to SLA for response and resolution, troubleshoot and perform root cause analysis of technical issues
• Communicate efficiently with the customer and the Internal R&D team on the bug fixes needed.
• Manages the status of issues raised and ensure they are resolved effectively in a timely manner.
• Continually evaluate existing processes to streamline and enhance customer support activities.
• Manage and keep tracks of change requests, bug fixes status and system updates deployments documentations.
• Prepare weekly statistic reports and able to present professionally in the weekly progress meetings with clients.
• Prepare and keep track of user manuals documentation and versions as well as release notes for upcoming enhancement releases.
• Conduct training / hand-holding sessions with users and to guide them to troubleshoot the system to resolve software issues or problems.

OK, I’m interested… is this the job for me?

We look for people who value agility, passion and teamwork; those who can bring fresh ideas to the table and want the opportunity to learn, grow, and expand their careers. Bring your aptitude and build upon what you do best for our customers, partners, team, and you.

Other qualities that you’ll need to be a fit for this role include:

• Degree in Information Technology/Computer Science/ Computer Engineering
• Preferably > 1 year experience in IT Industry managing large-scale applications support
• Pro-active, customer-focused, and comfortable dealing with clients/vendors directly.
• Excellent communication skills and the ability to interact professionally with a diverse group, executives, managers, and subject matter experts.
• Highly energetic, motivated team player, able to work under tight timelines and pressure to participate in digital transformation journey
• Good interpersonal skills, resourceful, take ownership
• Organized, meticulous, and able to work independently
• Strong analytical and troubleshooting skills
• Delivered B2B services effectively and efficiently, aware of service management preferred.
• Preference given to vendor–based software delivery experiences.
• Experience in Software Development and Microsoft SQL Server will be an advantage

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible for successful customers’ product full lifecycle, including but not limited to, technology transfers, new products introduction, device performance, yield, and reliability of our advanced technologies

Key Responsibilities

• Take charge for successful new products qualification and technology transfers from motherfab
• Complex data analysis to identify process design weaknesses and/or manufacturing tool issues.
• Design and execute experiments, analyse complex data sets and derive actionable insights to improve yield and performance for each specific technology and/or products
• Collaborate with the engineering teams to maintain process stability and provide technical solutions to customers

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Minimum of 2 years of experience in silicon process flow enhancements and managing process shifts, changes with design rules and product layout, ensuring optimal yield, electrical test and product performance with short-and long-term reliability implications considerations
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

JOB DESCRIPTION

· Perform research in the following areas:

o Global performance analysis, and/or global structural response analysis

· Assist in conducting physical model tests, field experiments and numerical simulations to support the development of integrated physical-numerical modelling and simulations.

· Collaborate with industry partners, affiliated research institutes and other relevant stakeholders to contribute to grant proposals for research funding consistent with the strategic goals of TCOMS.

· Any other duties as assigned by supervisor.

JOB REQUIREMENTS

· Min Bachelor?s/Master?s Degree from reputable universities in Civil Engineering, Mechanical Engineering, Marine Engineering, Naval Architecture, Applied Mathematics or other related disciplines.

· Preferably having relevant research/industry experience with competent knowledge in some of the following areas:

o Offshore engineering, marine engineering, hydrodynamics, naval architecture and ocean engineering.

· Prior knowledge in the following numerical methods/software/programming languages will be an advantage:

o CAD software such as SolidWorks, Rhino, AutoCAD

o Engineering tools such as WAMIT, SESAM and OrcaFlex

o Finite Element analysis tools such as SESAM, ABAQUS, Ansys

o Programming codes such as FORTRAN, Python, MATLAB, C++ or equivalent.

· Good interpersonal and communications skills.

· Ability to adapt and work effectively as members of a team.

· Good command of written and spoken language.

· Resourceful and self-driven with a high degree of professional integrity.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Equipment Engineer (Pick and Place) will provide technical leadership to startup of next generation of Fanout packaging equipment, optimize equipment capability, quality, and utilization through CIP to meet company's goals.

Responsibilities

• Have an in-depth understanding of how Precision die PNP, Pick & Place process equipment working principle and how critical parameters will impact downstream process and to work together with process counterpart to resolve complex integration issues.
• Manage and plan new equipment start-up to support production
• Establish Preventive Maintenance (PM) plans for all equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Identify and assess any safety and product risks, recommends risk eliminations, and control risk through mitigations and safe work procedures.
• Work on continuous improvement projects to improve equipment efficiency and address issues
• Setup tracking system to monitor expenditures
• Provide feedback, guidance and training to AEs
• Familiar and follow up on SPSR, MRB, 8D, TECN, ECN ISO9001/QS9000/TQM documentation for closure of issues / setup system.
• Familiar and update specifications to meet company Quality Standard requirements
• Familiar with SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness.
• Establish and maintain essential spare parts stock inventory
• Other ad-hoc duties as assigned

Requirements

• Minimum bachelor's degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• Minimum 3 years of relevant experience in equipment engineering, preferably in a semiconductor/LCD/Electronics/Electrical industry
• Hands-on experience in maintenance or troubleshooting of high precision equipment
• Self-driven leader and strong team player with keen technical ability, systematic approach, detailed-oriented, excellent problem-solving skills, and positive attitude.
• Proven ability to identify, assess and solve problem

Preferred Qualifications

• Prior experience in Advanced Packaging/foundry or similar industry background with high precision Pick & Place experience will be an added advantage
• Strong analytical with good interpersonal skills and Integrity
• Ability to work under pressure & in a Dynamic Environment

Job Descriptions:

Using levitation, we aim to isolate and control physical systems with unprecedented precision. The rapidly evolving field of levitodynamics explores how such systems can be used as quantum sensors and for testing fundamental physics. Most current levitated systems are limited to small masses (nano/microgram) and rely on incoherent optical interactions, which scatter rather than reflect light.

By leveraging platforms such as diamagnetic, superconducting, and optical levitation, we aim to create ultra-precise quantum sensors and explore profound questions in physics, including quantum collapse mechanisms and quantum gravity.

The successful candidate will contribute to activities such as:

· Modeling the dynamics of levitated systems.

· Learning to operate advanced cryogenic systems.

· Designing, constructing, and characterizing optical systems.

· Exploring novel techniques to exceed the standard quantum limit using correlated spin systems.

Key Responsibilities:

· Modeling: simulate the dynamics of magnetically and optically levitated systems.

· Fabrication: Develop advanced materials and components for levitation systems.

· System Design: Build and test optical systems and feedback-control mechanisms.

· Research & Innovation: Investigate groundbreaking applications in quantum sensing and fundamental physics.

Job Requirements:

· Bachelor/Master degree in Physics, Applied Physics, Precision Instrumentation, or related fields.

· At least 5 years of relevant experience

· Strong motivation for multidisciplinary research in quantum technologies and fundamental physics.

· Experience in one or more of the following is highly preferred:

Superconductivity

Quantum sensing

Cryogenic systems

Feedback-control systems

Optical systems design

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Overall Job Purpose

Responsible for configuring, implementing, and maintaining Project AVEVA Net/AIM and ISM instances. The incumbent will play a pivotal role in Project data capture, verification, and handover.

Core Responsibilities

• Be the Single Point of Contact for all matters related to setting up, maintaining, administering, upgrading, and troubleshooting the AVEVA NET system deployed on all MODEC
• Coordinate with the engineering disciplines assigned to the project and work closely with project management, procurement, HSE, QA/QC, operations, and the construction team. Meet or, where possible, exceed on-time deliverables while maintaining quality and safety in each activity.
• Establish and maintain the creation of a Class Library and define its structure and mapping techniques in ISM.
• Develop efficient data capture, validation, loading and handover work processes to meet Client/Project schedule requirements.
• Establish new project portals that effectively reflect client/project class libraries, data structure, and handover requirements.
• Ongoing Gateway configuration, maintenance, and development of AVEVA NET portals.
• Generation of Query Forms, SSRS and BI reports communicating data discrepancies, omissions, completion trending and status
• Raise the profile of information management and create a data-centric culture via effective portal development and deployment.
• Shall be capable of developing work instructions for users of AVEVA NET.
• Must understand company goals and implement management directives and policies.
• Anticipate potential problems and take preventive actions.
• Support the Product Manager in planning and delivering AVEVA NET solutions on projects.
• Shall train the MODEC users on the AVEVA NET application in projects.
• Interface with all disciplines to clarify/explain AVEVA NET intent and suggest alternatives when
• Contribute to continuous improvement of company work methodology/procedures.
• Conclude all open issues amicably.

Educational Qualification:

Certification(s):

Training in AVEVA NET administration

Relevant Experience:

a) 5 years’ experience applying AVEVA NET in onshore/offshore Oil & Gas areas or FPSO line(s).

b) AVEVA NET/AIM and AVEVA ISM administration and implementation.

c) Be fully proficient in exception handling between the AVEVA system with associated Gateways and the Client system

d) Have extensive knowledge of AVEVA registers gateway interface with Client system

e) Experience in mapping Company data and document structures to Client structures. Have an in-depth understanding of FEED & Detailed Design deliverables, their execution methodology and their interdependencies with one another.

f) Have previous experience in engineering information management.

g) Possess previous experience with AVEVA Net Portal and ISM development and administration skills on Oil & Gas Projects, specifically for Major Capital Projects.

h) Knowledge of Engineering Design software like AVEVA E3D and AVEVA Engineering is a plus.

i) Possesses good working knowledge of the Oil & Gas Industry, including EPCs and owner-operators (preferred but not mandatory).

j) Shows evidence of good organizational skills.

k) Demonstrates ability to take the lead.

l) Good communication skills.

m) Commitment to take responsibility.

About US

UTEC was first established in Singapore on 9 December 2014 and we specializes in civil and tunnel infrastructure construction works, with projects based locally and throughout Asia Pacific. The Company draws on the skills and expertise of its people to deliver tailored underground engineering solutions, striving to provide the best engineering solution and economics to its client. Since its establishment as a Contractor in underground works, the Company has been involved in projects not only in Singapore, but as far as India as well.

OUR VISION

Providing innovative, cost effective & sustainable solutions to underground works, bringing the best engineering solutions to our clients and all the stakeholders.

About This Role

1. Carry out land and engineering surveys required for the construction.

2. Lead the execution of topographic and as-built surveys to capture essential data.

3. Check and compute the pre-computation prior to any setting out for field surveyors and verify the accuracy of survey data, measurement and calculations.

4. Propose engineering documents for clients' approval, on-site installation and hands-on monitoring of sensors, instruments and equipments.

5. Attending project meetings, schedule control, monitor site personnel ensuring data processing, review, analysis, submission of reports.

Skills Required

1. Well verse in surveying technology and equipment.

2. Proven track record in land surveying.

3. Understand geotechnical instrumentation.

4. Proficient in Microsoft Office and AutoCAD.

*May required to work OT when necessary.

*This role is on 5.5 days workweek and work location is currently located at the central.

*More details of the role, company and benefit will be shared during the interview for shortlisted candidate.

These are our Featured Projects that we are Proud to show you:

SINGAPORE

1) PUB – Deep Tunnel Sewage System Contract T-11,

2) LTA – Thomson Line T206

OVERSEAS

1) INDIA - Mumbai Metro Line 3 – UGC07

2) MALAYSIA - Prasarana Malaysia Bhd – LRT3

3) HONG KONG - CEDD – Kai Tak Development Stage 3B

AND MORE ARE ONGOING AND COMING!

What you will do:

The Systems Applications Engineer, National Accounts will Provides sales support to the engineering and sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Oversee the application engineering team, providing configuration, enhancement, and support for technical documentation and presentations to clients.
• Customize and introduce new features to Metasys software and in-house developed applications based on end-user requirements.
• Design and construct new applications tailored to meet customer specifications and needs.
• Guide application engineers in writing and executing tests on complex programming, troubleshooting issues as they arise, and supporting product launches.
• Provide technical support and troubleshoot application issues while performing tests on complex programming and assisting in product launches.
• Assist the application manager in process improvements to enhance productivity and efficiency.
• Collaborate with system integrators (SI) to monitor their performance with quality assurance/quality control checks and ensure completion sign-off.
• Manage vendor relationships, including scoping application services and reviewing deliverables.
• Collaborate as part of a design, engineering, and operations team.
• Knowledge of ACMV and controls associated with Johnson Controls Metasys will be advantageous.
• Deliver customer support by responding to technical queries with detailed analyses of building management systems, tooling costs, and design/process improvements to meet all customer needs.
• Collaborate with engineering, sales, and operations teams to understand standard fabrication techniques, composite materials, and customer demands to develop design details.
• Create and present technical engineering information based on customer proposals, including 3D representations of products and tooling.
• Prepare cost estimates by analyzing blueprints, customer documents, and consulting with engineers and technical personnel.
• Conduct conceptual designs of composite components and assemblies to support proposals.
• Generate accurate CAD models of components and assemblies.
• Develop detailed bills of materials for proposals.

What we look for:

• Bachelor's Degree in Engineering with a minimum of 5 years of relevant experience in Access, Intrusion, and Video Management systems
• Demonstrate strong verbal and written communication skills, including the ability to efficiently articulate technical subject matter
• Good communication skills, with an ability to express and understand complex technical concepts.
• Experience of working with globally distributed teams & matrixed environment

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

A qualified candidate will be self-motivated with strong technical and analytical skills as well as possess practical and hands-on approach to engineering control in the areas of metrology management

Responsibilities:

• Recipe creation and optimisation for new R&D applications requirement.
• Preventive and corrective maintenance planning cum execution and vendor management.
• To take charge of new tools technical assessment and tender creation (equipment cum process application startup) and service contract tender set-up
• Drive continuous improvement projects (CIP) to achieve better measurement repeatability (MSA, GR&R, SPC etc).
• To set-up appropriate process and product control plan and out of control action plans (OCAP)
• Provide technical training to related staff on best-known practices in terms of application metrology recipe creation.

Requirements:

• Bachelor degree in Electrical and Electronics, Material, Physics or Chemical engineering
• Minimum 3~5 years of hands-on semiconductor experience (preferably in metrology application and equipment maintenance)
• Possess computer soft ware skills (i.e. JMP, Minitab, SQL, Visual basic, etc)
• Knowledge in problem solving and quality control skills (i.e. LEAN 6sigma, RCA, DOE, etc)

We need you to work along-side the Cloud Apps team, supporting our UI wielding petabytes of streaming data into visualizations and metrics of both real and simulated scenarios, aiding: management; debugging; and real-time monitoring of our Autonomous Vehicles (AVs).

You’ll be connecting the work of many disparate, international teams - ensuring their “day-to-day” goes by uninterrupted. You’ll be writing, and testing, in: React; TypeScript; and Vue.js in order to take stakeholder concepts from vague ideation, to the creation of great, responsive UIs with intuitive visualizations. This work will encompass every step of the journey of our AV fleets… from registration and software updates, to calibration, testing, and finally getting users into commercial rides.

What we want you to do

• Design, build, document, test, and maintain the AV fleets’ monitoring and data visualization platforms
• Monitor, support, and resolve issues as they arise in production
• Assist with high-level analysis, system design, and code reviews
• Communicate with stakeholders and team leads to identify system requirements

What we hope you’ll have

• 5+ years of working professionally delivering complex, high-performance web applications with modern JavaScript tooling
• A good eye for UI, UX, and responsive design
• Comfort taking projects from ideation through to completion, with strong communication and collaboration across multiple international teams
• 3D visualization tools (WebGL, Deck.gl/three.js, Mapbox)

Bonus points for experience with

• Working in a globally distributed team
• React, Vue.js, and TypeScript
• Data visualization (Plotly, D3); video manipulation; WebSockets
• Serverless APIs tools such as: AWS; Docker; Terraform
• Python and/or Golang

We are looking for a Systems Engineer to support the institute’s IT infrastructure and operations. The candidate will provide level 2 and level 3 support for IT services, assist with new setups, as well as review and implementation security and compliance measures.

Requirements:

• Minimum Diploma or Bachelor’s degree in computer-related studies
• At least 3 years of relevant work experience
• Strong knowledge in servers and hardware technology
• Experience with open-source software packages and IT infrastructure services
• Good understanding of best practices and cybersecurity concepts
• Experience or strong knowledge in Linux system administration, scripting, storage, and security
• Experience with Virtualization and Containerization
• Knowledge in networking, firewalls, and routing
• Good interpersonal and communication skills
• Ability to work independently and as part of a team

Good to Have

• Familiarity with local scientific research environment.
• Experience with computational clusters (e.g., SLURM).
• Familiarity with Linux-based scientific tools and software.
• Experience with automation tools like Ansible or similar.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.