Job Summary

· Senior/Principal Civil and Structural (C&S) Engineer is an exciting role that offers candidates opportunities in SJ Global Energy’s business unit covering C&S design work for various projects such as CCGT power plants, renewable, clean energy projects and typical land infrastructure for terminaling projects.

Responsibilities:

· Perform feasibility study, concept design, front end engineering design (FEED) and detailed designs for civil & structural (C&S) works in industrial/energy related projects. The C&S design will cover foundation, substructure for storage tanks, pipe racks/sleepers/bridge, equipment plinths/foundation, underground pipeline culvert, drainage, sewerage, road infrastructures, superstructures for low-rise buildings/structures, etc.

· Experience in power plant projects would be an added advantage

· Prepare C&S material take-off (MTO) for cost estimates

· Prepare C&S tender specifications, and project requirements, carry out the tender evaluation, etc. for C&S works

· Conduct presentation for concept, FEED and detailed designs to clients and stakeholders

· Project management

· Carry out authorities’ pre-consultation, submissions and liaison with authorities for necessary approvals

Requirements:

· Preferably, honour degree in C&S Engineering from a recognised university and with at least 5 years of detailed design experience in civil & structural engineering projects.

· Conversant in geotechnical engineering design

· Experience in marine facilities’ design would be an added advantage.

· At least 5 years of relevant working experience in the design of concrete and steel structures, drainage, sewerage and road works infrastructures

· Candidate with more than 15 years of relevant experience will be considered for a higher position

· Conversant in Eurocodes, BS Codes, NFPA, API

· Conversant with local authorities’ requirements and submission

· Able to perform a feasibility study, conceptual, FEED and detailed design using commercial software, excel spreadsheet, etc.

· Able to project manage assigned projects independently and possess strong presentation, communication and report writing skills

· Good spoken and written English

· Fluency in spoken and written Chinese would be an advantage

· Able to travel for overseas projects at short notice

Cyber Security Engineer (Shift)

Job Description:

• Perform remote standby during weekends, public holidays, and after office hours for Monday – Friday.
• Provide phone/email and on-site (if required) support, resolving, mitigation, troubleshooting and investigating issues pertaining to cybersecurity solutions the company has implemented for its clients.
• Log incidents (either via phone or email) into incident management system (ITSM).
• Track and handle all incidents within client’s SLA.
• Coordinate with stakeholders for service recovery and follow through all the necessary escalation to respective team(s).
• Follow up with client on pending tickets for closure.
• Provide daily handover report after each shift.
• Onsite training during office hours as part of onboarding process and occasional trainings to keep up to date with the product

Job Requirements:

• Professional certifications in Information Technology or related fields.
• Self-motivated, always keen to learn new technologies and able to work independently.
• Possess logical thinking process in solving technical problems.
• A well-natured team player with strong customer centric mindset.
• Good communication skills with clients and various stakeholders.
• Experience or knowledge in Microsoft Windows and Server, Microsoft SQL, Networking and Virtualisation is an added advantage.

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills

Job Responsibilities:

• Install, maintain, and repair electrical systems and components.
• Conduct regular inspections of electrical systems to ensure compliance with safety regulations.
• Troubleshoot electrical issues, including diagnosing faults and repairing equipment in a timely manner.
• Assist with the design and layout of electrical systems for new projects or modifications.
• Interpret electrical blueprints, wiring diagrams, and technical specifications.
• Adhere to all safety and quality control standards.

Qualifications:

• Associate's degree or higher in Electrical Engineering, Electrical Technology, or a related field.
• Proficient in troubleshooting and repairing electrical systems and machinery.
• Strong knowledge of electrical codes and safety regulations.
• Familiarity with electrical testing equipment and tools.
• Ability to read and interpret technical drawings and schematics.

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Key Roles and Responsibilities

• Assist the Site Project manager in monitoring and managing the day-to-day operation of the projects.
• To support Site Project Manager in managing day-to-day clients’ interactions and expectations for optimal results
• To support Site Project Manager to collaborate with peers, liaise with trade contractors, clients and consultants and ensure timely delivery of quality services.
• To prepare and submit method of statement, sketches, site record and other technical submissions in a timely manner.
• To prepare Inspection and Test Plan, user manuals, drawings and conduct inspection and check on works performed.
• Check the drawings discrepancies and conduct field verification, and submit technical clarification to the clients and consultants.
• Ensure updated drawings including shop drawings are used by the site team in a timely manner.
• Assist the Project Manager in the preparation of reports and presentation to management, clients and stakeholders.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act
• Perform any other tasks as and when required so as to meet project milestones

Requirements

• Min Diploma or Higher Nitec in Mechatronics/Electrical/Electronic Engineering or relevant with at least 3 years working experience
• Hands-on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must
• Hands-on experience in security system configuration, System Networking and integration with third-party systems will be an advantage
• Willing to take ownership and Pro-active in Problem solving
• Must be a team player and strong verbal and written communication skills
• Customer service and business orientated with good initiative and adaptability
• Required to perform standby duties whenever required
• Driving License – Preferably if candidate possesses its own vehicle
• Singapore Citizens are preferred
• Location is at Shan Road / Site Office
• 5.5 work days

Job Description

• Develop detailed designs, layouts, and specifications for piping systems, ensure proper pipe support design based on piping loads, thermal expansion, and seismic considerations.
• Identify appropriate materials, ensure material compliance with project specifications, applicable codes, and standards such as ASME, ANSI, and local regulations.
• Work closely with process, mechanical, civil, and electrical teams to ensure piping systems are integrated seamlessly with other systems
• Coordinate with procurement, construction, and commissioning teams to ensure timely delivery and installation of piping systems
• Prepare piping-related project deliverables including technical drawings, specifications, data sheets, and material take-offs
• Liaise with suppliers for quotation and technical evaluation of quotation. Review and approve piping construction drawings, isometrics, and support drawings
• Lead piping design reviews, coordination meetings, and vendor technical discussions
• Manage piping engineering scope, schedule, and budget, ensuring project milestones are met

Requirements

• Degree in Mechanical / Piping Engineering
• For degree holder, minimum 5 years of experience in piping design and engineering. For Diploma holder, minimum 8 years of experience is required.
• For senior position, candidate must have at least 10 years of experience, including leadership or project management experience.
• Strong expertise in piping materials, piping arrangement, stress analysis, and design of piping systems
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Knowledge of international and local standards (e.g., ASME, ANSI, BS EN, PUB Singapore guidelines)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping engineering software, and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Responsibilities:

• Lead the protocol generation and review for the assigned areas (i.e. process equipment, facilities, utilities and laboratory equipment)
• Review vendor or construction turnover document
• Review construction walkdowns to assure compliance with design
• Lead or direct execution of full C&Q project lifecycle, including URS, Design Verification, FAT, SAT, DQ, IQ, OQ and PQ etc.
• Trouble shooting equipment with a cross functional team
• Manage summary report writing wherever required
• Verification of Construction Contractor’s Document deliverables (CTODs) and Vendor Document deliverables (VTODs)
• Support the review and revision of design document, wherever required
• Liaise with identified stake holders, including suppliers/contractors
• Provide SME input wherever required
• Manage the assigned system handover
• Support the management of project schedule
• Compliant to quality and safety requirements
• Complete trainings in a timely manner
• Support company operation and business as required
• Any other project responsibilities specified in the individual OAN and organizational responsibilities assigned by management

Requirements:

• Minimally a Bachelor of Science/ Bachelor of Engineering or related scientific degree
• At least 7 years of experience in Pharmaceutical industry
• In-depth technical knowledge in the assigned area and associated regulatory requirements, guidelines, and other industry best practices
• Ability to work in a fast paced / dynamic work environment
• A fast learner with “Can-do” attitude
• Good time management skill and great attention to detail
• Proficient presentation and facilitation skill is a plus

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Job Title: QA/QC Engineer

Salary Range: S$3,400 – S$4800

Report to: QA/QC Manager

Min Qualifications / Experience :

1) Degree in Mechanical Engineering holder with 2-4 relevant experience

Job Skills Required:

1) Knowledge in Microsoft office applications such as Excel, Word, Power Point and

related spreadsheet software.

2) Must be able to work well with others in a team setting.

3) Ability to work independently.

4) Must be able to effectively handle many concurrent projects.

5) AWS, ASME AS, PD5500.

Duties & Responsibilities

a. Assist QA/QC Manager in the managing the QA/QC department.

b. Establish, implement and maintain the QC system for products that need to comply with ASME codes.

c. Prepare, control and maintain the QC Manual in accordance with ASME code.

d. Initiate quality programs and report to QA/QC Manager for the current product quality level.

e. Develop Inspection Test Plan (ITP), inspection and testing procedures.

f. Supervise and guide the team of QC inspectors and administrative assistant.

g. Control the usage of ASME stamps and review ASME’s MDR forms.

h. Maintain and control the welding procedures (WPS) and welder performance qualification records.

i. Any Adhoc assignment given by QA/QC Manager.

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Scope and Responsibilities:

• Coordinate equipment and process validation execution, data collection and summaries.
• Perform documentation and release technical requirements/ drawings, write, review or update work instructions for engineering and consumables production lines.
• Assist in MES ticket and process verification/ validation activities.
• Assist Process Engineers in providing direct support to troubleshooting, sustaining and continuous improvement for consumables production lines related to new product development, yield, quality and throughput.
• Recommend and assist in implementation of improvements in a production environment to meet goals across multiple operations and technologies.
• Assist with design and execution of controlled experiments to optimize processes; document and analyze process test results.
• Support with Engineering/ R&D teams to develop processes for new products and improve processes of existing products.
• Supports nonconforming material analysis and investigations.

Qualifications:

• Possess good understanding of manufacturing process and regulated biotech or medical devices manufacturing environment.
• Capable of executing test plans for components, materials, systems and processes.
• Competent in Microsoft word, excel, powerpoint
• Knowledge in product & process feasibility study, line validation, qualification and optimization to production
• Excellent team player, interpersonal and communication skill.
• Well-developed documentation and technical report writing skills
• Able to work well under stress, both internally and across functions and perform multitasking.
• Proactive, innovative and self-motivating.
• Team player with strong focus on safety, quality and timeline.
• Diploma/ Bachelor in Engineering, Sciences or related field
• Experience in manufacturing/ FDA-regulated environment is a plus.

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

• Coordinating with the client and attending client meeting whenever required
• Supervise and coordinate with team to produce deliverable per schedule and quality
• Administrative role of 3D modelling process with AVEVA software
• Review and comment on various engineering documents
• Design & incoporate structural components of project into AVEVA 3D model and produce 3D structural models
• Multi-discipline design coordination to avoid & correct interferences in AVEVA 3D model
• Prepare construction drawings (2D Structure drawings, bending template, profile nesting, plate nesting and material list) utilizing AVEVA Marine Drafting
• Modelling of Equipment and Outfitting in AVEVA
• Extraction of Outfitting General Arrangement from AVEVA
• Prepare a wide range of engineering related documents such as plot plans, Key plan
• Extraction of Piping layout and Piping General Arrangement from AVEVA
• Extraction of Isometric drawing with MTO and Line list
• Data consistency and Clash checking in AVEVA
• Prepare support drawings
• Checking the piping and other discipline documents as per shipyard payment
• Perform 3D Modelling of Electrical equipment and cable tray/ladder, supports and instruments in AVEVA
• Preparation of 2D deliverables (lighting layout, wiring diagram, equipment layout, interconnection diagram, cable tray/ladder layout, cable tray/ladder fill report and MCT layout)

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Perform inspections and tests on electrical and instrumentation systems, including cables, panels, field instruments, and control systems.
• Ensure installations and testing comply with approved drawings, project specifications, and relevant standards
• Prepare and review Inspection and Test Plans (ITPs), Method Statements, and Quality Control procedures.
• Maintain quality records, such as test reports, calibration certificates, and inspection checklists.
• Liaise with construction team, subcontractors, and corporate QMS department to address quality-related issues
• Support commissioning activities by ensuring all quality requirements are met before system handover
• Ensure compliance with industry standards, local regulations, and safety requirements
• Any other duties to be assigned from time to time

Pre-requsities

• Degree/Diploma in Electrical Engineering or related field
• Minimum 5 years of experience in power or industrial plant construction projects
• In-depth knowledge of electrical systems for critical equipments in power plant construction
• Proficiency in inspection and testing of electrical and instrumentation systems
• Effective communication and interpersonal skills for collaboration with multidisciplinary teams
• Commitment to safety and compliance with regulatory requirements
• Project location: Jurong Island (Transport provided at designated pick-up points)

At Temasek Laboratories@NTU, our mission is to undertake cutting-edge research in defence science and technology, driving new solutions and advancements across various research areas, including Microsystems Technology, Hardware Assurance, Signal Processing, Advanced Materials, Advanced Laser Technology, and Emerging Technologies.

Microsystems Technology Development Centre (MTDC) at TL@NTU is having ISO certified III-V Wafer Fabrication Line up to 100-mm diameter wafers with strong industrial/academic experienced Technical Specialists/ Engineers/ Scientists. We are a fast-paced research facility that designs, develops, and manufactures integrated chips, i.e. heterogeneous system in package modules, for defence and commercial applications.

We are looking for a hands-on Thin Film engineer who demonstrates a positive attitude, collaborates well in a team, and possesses strong technical abilities along with sound problem-solving skills.

Key Responsibilities:

• Work with the module leader and execute the design of experiment (DOE) using advanced techniques such as sputtering, evaporation, and chemical vapor deposition (e.g. SiO2, SiON, TaN, Au, Ti, Al, Ni, Pt and etc.).
• Develop and optimize deposition parameters to achieve precise film thickness, uniformity, and quality.
• Help to identify and troubleshoot process issues, working towards yield enhancement and performance improvement.
• Utilize a range of characterization techniques, including optical microscopes, surface profiler, SEM, Ellipsometer to analyze thin film properties.
• Maintain detailed documentation of processes such as standard operating procedure (SOP), experimental setups, and results for future reference and knowledge transfer and including training.
• Oversee the operation of laboratory equipment and ensure proper functioning. Work with the equipment vendor to conduct routine maintenance, troubleshooting, and calibration of equipment to minimize downtime.
• Work with the University’s procurement team to source and acquire necessary equipment. Evaluate and select vendors, ensuring equipment aligns with research requirements and budget constraints.
• Adhere to laboratory safety protocols and ensure compliance with University and regulatory standards.
• Collaborate with different modules and team members.
• Communicate effectively with team members, providing updates on processes and status of equipment.

Job Requirements:

• Diploma in Engineering (e.g. Microelectronics, Electrical & Electronics Engineering, Material Engineering) with 3 years of relevant working experience or Bachelor’s degree in any Engineering (e.g. Microelectronics, Electrical & Electronics Engineering, Material Engineering).
• Hands-on working experience in semiconductor fab/cleanroom environment in Thin Film area preferred (e.g. SiN, SiO2, TaN, Al, Au, Ti, Ni, Pt and etc.).
• Ability to create and analyze DOE for Thin Film process.
• Experience in wet bench processes, especially the lift-off technique, is essential.
• Basic knowledge in semiconductor fabrication process and device physics.
• Strong understanding of thin film materials and their properties, with expertise in process optimization and troubleshooting.
• Excellent problem-solving skills and ability to work effectively in a collaborative team environment.
• Strong communication skills, with the ability to convey complex technical concepts clearly and concisely.
• Commitment to maintaining high standards of safety, quality, and professionalism in all aspects of work.

We regret to inform that only shortlisted candidates will be notified.

Role Summary:
As a Process Engineer, you will oversee machine operations and ensure that all preparations are conducted aseptically before production begins. You will coordinate between technicians and maintenance staff to ensure smooth operations and effective teamwork.

Key Responsibilities:
• Oversee daily machine schedules, production targets, and machine maintenance.
• Resolve worker issues and coordinate activities to meet company goals.
• Train new employees on equipment operation and safety procedures.
• Maintain ISO9001, ISO13485, and GMP documentation standards.
• Ensure workplace safety and cleanliness.
• Drive continuous improvement in quality and process efficiency.

Requirements:
• Diploma / Degree in mechanical , chemical engineering field with 1-3 years of relevant working experience.
• Planning experience is an advantage.
• Open to work shift working hour

How to Apply:
Interested candidates, please submit your updated resume by using Quick Apply button
We regret to inform that only shortlisted candidates will be informed.

Yip Seow Thung
Registration Number: R24121304
EA License No: 18C902

Automation SIS (Safety Instrumented Systems) Engineer

12 month contract

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

Critical Responsibilities but not limited to:

• Participate in Safety Instrumented Systems (SIS) Capital Projects as automation representation for installation and expansion of new SIS Systems. Ensuring compliance to industry standards like IEC61511 and IEC61508
• Perform automation change controls with guidance from Automation Lead to ensure that changes are raised and closed on time following the required quality standards. Manages Project Schedule to ensure that manufacturing is not impacted.
• Maximizes production capacity through timely completion of planned maintenance activities and effectively resolving unplanned downtime and events
• Participates in HAZOP / LOPA reviews as SME and completes action items as required
• Develops Automation SOPs, Job Aids and procedures.
• Leads and applies effective root cause analysis and troubleshooting techniques to support resolution of incidents, events, deviations, atypical investigations and fault reports related to Automation and ensures all the resolution are effectively implemented within the agreed time frame to prevent recurrence.
• Supports a continuous improvement framework within Automation and the IPT and works with Leads to identify and implement improvements.
• Support Automation Projects
• Any other activities required by managers

Requirements:

• Bachelor’s degree in electrical, Electronics, Chemical, Science or Computer Engineering
• Minimum 5 years of technical experience in automation engineering within manufacturing or oil & gas industry
• Minimum 5 years hands-on experience in Yokogawa ProSafe and DCS
• Minimum 5 years’ experience working on Safety Instrumented Systems capital projects.
• TUV Functional Safety Engineer Certification

Reg No: R22104540

EA License no: 94C3609

Young and research-intensive, Nanyang Technological University, Singapore (NTU Singapore) is ranked among the world’s top universities. NTU’s College of Computing and Data Science (CCDS) is a leading college that is known for its excellent curriculum, outstanding and impactful research, and world-renowned faculty. Today, we are ranked #2 for AI and Computer Science by US News Best Global Universities; and #8 for Data Science and AI by QS World University Ranking.

A hot bed of cutting-edge technology and groundbreaking research, the College aims to groom the next generation of leaders, thinkers, and innovators to thrive in the digital age. Located in the heart of Asia, NTU’s College of Computing and Data Science is an ‘exciting place to learn and grow'. We welcome you to join our community of faculty, students and alumni who are shaping the future of AI, Data Science and Computing.

We seek to appoint a Research Engineer II (fixed term, 30 months) to work on uncertainty quantification in LLMs.

Key Responsibilities:

• Work with project team in setting up and maintaining the project’s compute infrastructure, ensuring that these meet the needs of the project.
• Maintaining the project’s internal communication infrastructure to ensure that researchers across all three universities are able to work effectively together.
• Collaborate with the project team on research pertinent to the project, by
  Contributing to and developing ideas for novel methodologies and understanding of the research questions,
  Acting as a source of information and advice to other members of the research team, especially on computational matters
  Enabling large scale research implementations and managing research experiments,
  Contributing to the writing of research papers and submissions to high profile venues,
  Leading on efforts at open sourcing research code, and
  Presenting outcomes at international conferences and workshops.

The postholder will carry out any other duties that are within the scope, spirit and purpose of the job, as requested by their Reporting Officer.

Job Requirements:

Essential criteria

• Close to completion or holds a MSc or above in a relevant technical subject (e.g. computer science, statistics, engineering).
• Possess strong publication track record in machine learning or related fields.
• Possess sufficient specialist knowledge, research skills and interests in deep learning and large language models to work within established research programmes and contribute ideas and solutions.
• Possess strong technical knowledge and abilities of deep learning and large language modelling frameworks (pytorch, jax, huggingface) as well as popular open source codebases and LLM APIs.
• Possess strong motivation and interests in developing computational infrastructure (including both software and cloud solutions) to enable large scale implementations and experimentations in large language models.
• Possess strong collaboration abilities in person, on paper and over electronic channels.
• Excellent communication skills, including the ability to write for publication, present research proposals and results, and represent the research group at meetings.

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Miniumum 1 year of working experience in contruction industry.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

We are looking for an L1+L2 App Support Engineer to join our dynamic team! You will play a crucial role in ensuring the smooth operation of applications and providing technical support to end users.

• Competitive remuneration package (up to $4,000 + AWS + VB).
• Hybrid working arrangement.
• Be part of a collaborative and supportive team that encourages growth.

Responsibilities:

• Provide assistance to users, addressing inquiries, troubleshooting issues, and quickly implementing solutions to restore systems to full functionality.
• Keep detailed documentation of user interactions, reported problems, solutions applied, and any further actions needed by management or tier 3 support.
• Create user manuals and troubleshooting guides to aid both support teams and users in effectively interacting with the system.
• Work closely with L3 Technical staff and the project manager to set objectives and plan system upgrades and improvements.
• Develop and implement new procedures to boost efficiency, enhance customer satisfaction, and reduce operational costs.

Job Requirements:

• Singaporean only.
• Bilingual in English and Mandarin to handle Mandarin-speaking clients.
• Good writing and communication skills.
• Strong troubleshooting and problem-solving skills with experience in identifying and resolving complex technical issues.
• Experience with ticketing systems (e.g., JIRA, ServiceNow) and version control tools (e.g., Git) is a plus.
• Prior experience in supporting mobile or web applications.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

We are seeking a highly skilled Senior Software Developer to contribute to significant government projects!

• Join a team that utilizes technology to enhance the lives of Singaporeans.
• Agile development culture to promote continuous learning and growth.
• Competitive remuneration package. Hybrid working arrangement.

Responsibilities:

• Design and implement scalable backend solutions using Golang.
• Engage in Agile practices like sprint planning and daily standups, alongside Scrum methods such as code review and unit testing, ensuring iterative delivery of high-quality software.
• Collaborate with cross-functional teams to deliver high-quality software products.
• Participate in code reviews and provide feedback to improve code quality.
• Deploy applications to production and provide ongoing support.
• Spearhead initiatives to streamline build and release processes, leveraging DevOps principles and automation tools to enhance deployment pipelines.
• Troubleshoot and resolve technical issues in a timely manner.
• Identify opportunities for process improvement and contribute to continuous improvement efforts

Job Requirements:

• Singaporean only.
• Minimum of 4 years of experience in Software development, with expertise in 4 years in Golang, ReactJS and NodeJS.
• Prior hands-on experience in handling highly scalable distributed system, configuring automated build, test, and deploy pipelines to streamline the software delivery process.
• Proficient in REST and SOAP API.
• Experience in cloud-native technology, such as AWS (Related certification will be an added advantage.
• Hands-on experience with databases like Postgres, MySQL, and Redis.
• Proficiency with development tools like Visual Code and CI/CD tools (e.g., Git, Jira, Jenkins).
• Working experience in Agile environments or projects (Scrum/Kanban).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781