Responsibilities:

• Manage the financial & contractual of all projects from pre-tender to post contract phases including quantities, variations, cost estimates, monthly claims, final accounts etc
• Work closely with Project Manager in preparing monthly updated project costing
• Develop suitable subcontract conditions for specific project requirements
• Prepare project budgeting and costing reports
• Responsible in cost estimating, quantity take off, claims preparation, variations and final accounts.
• Review of contracts, prepare tender & contract documentations, tender analyses & reporting, measurement etc
• Review sub-contractors claims and materials on site
• Standardize all agreements (e.g. subcontracts and joint ventures) with alignment to contract policy

Requirements:

• Degree in Building/ Construction Management/ Quantity Surveying or its equivalent.
• Minimum 3 years of relevant experience in construction industry.
• Strong in arbitration and negotiation skills.
• Good understanding & knowledge of contracts law and its application.
• Preferably well versed in various form of contracts such as PSSCOC, SIA and FIDIC as well as other international form of contracts.
• Preferably conversant in using CostX and/or Glodon Cubicost measurement software.
• Strong communication and presentation skills.
• Only Singaporean

If you have the drive and capabilities, please apply with a detailed cv to our career portal at:

https://hrsembcorp.darwinbox.com/ms/candidate/careers/a64e45e3938ee2

Only shortlisted candidates will be notified. Thank you for your interest.

Job Responsibilties:

• Responsible for projects management, planning and the design of Mechanical & Electrical building systems
• Meeting clients, permitting authorities & services providers on scope of service and conduct field surveys
• Handling project evaluation, budgets, documentation, technical specification and coordination
• Analyze, building computer models & selection of systems and evaluate project budgets
• Complete design documents & technical specifications
• Work Coordination with other teams as well as mentor junior staff
• Ensure the smooth completion of the project

Job Requirements:

• Degree in Mechanical Engineering accredited by Professional Engineer Board, Singapore.
• Minimum 5 years of experience in engineering design work for building services
• Singaporean only

If you have the drive and capabilities to take our challenge, please send full details of your experience, qualifications, current and expected salaries via Sembcorp Career Page: https://hrsembcorp.darwinbox.com/jobs/jobsdetailed/id/a64049e32e3679/grp_company/a632dab40df257.

Only shortlisted candidates will be notified. Thank you for applying.

Seeking Singaporean to join as Senior System Engineer (1 year project renewable)

DEGREE + Proficiency in Windows Server operating systems (2008, 2012, 2016, 2019).

Work hours: Monday to Thursday : 8.5hr. Staggered between 7.00am – 7.00pm, Friday : 8hr. Staggered between 7.00am – 7.00pm + Saturday – Once a month. Weekday hour will be shortened in such case.

Overview:

An Infrastructure Senior System Engineer is a professional responsible for managing and maintaining the Windows-based infrastructure and associated technologies within an organization. Their primary role is to ensure the stability, security, and performance of Windows-based systems and applications.

Responsibilities:

• Design, implement, and manage scalable, secure, and reliable cloud-based infrastructure solutions and systems
• Monitor and maintain the health, performance, and security of Windows servers and systems.
• Administer Active Directory, Group Policy, DNS, DHCP, and other related services.
• Configure and troubleshoot virtualization platforms (e.g., VMware, Hyper-V).
• Configure and maintain cloud services, including virtual machines, containers, serverless functions, networking, storage, and security.
• Install, configure, and manage Windows servers and services at datacentres.
• Collaborate with cross-functional teams to implement and support enterprise-wide solutions.
• Perform routine system and application updates, patches, and upgrades.
• Develop and maintain documentation related to system configurations, processes, and procedures.
• Provide level 2 and level 3 support for Windows-related issues.
• Participate in on-call rotation for after-hours support as needed.
• Troubleshoot and resolve issues related to cloud infrastructure, network connectivity, and application deployments.

Job Requirements:

• Bachelor's degree in relevant field.
• Preferably 6 years of working experience in a Cloud Engineer or similar role, with a focus on designing, deploying, and managing cloud-based solutions/operations
• Proficiency in Windows Server operating systems (2008, 2012, 2016, 2019).
• Strong understanding of Active Directory, Group Policy, DNS, and DHCP.
• Experience with virtualization platforms such as VMware and Hyper-V.
• Solid understanding of cloud networking concepts, including virtual private clouds (VPCs), subnets, routing, and load balancing.
• Knowledge of security best practices and experience implementing security controls in cloud environments
• Familiarity with monitoring tools and systems management solutions.
• Excellent problem-solving and troubleshooting skills.
• Strong communication and interpersonal abilities.
• Certifications such as AWS Certified Solutions Architect, MCSE, MCSA, or equivalent are a plus
• NOTE: This role required one to serve 2 months notice in project when hired

Seeking Singaporean to join as Systems Engineer (HPC, Linux) 1 yr project renewable assignment

Mon to Fri : Office hours

Job Scope:

As a Systems Engineer specializing in High-Performance Computing (HPC), you will be a key contributor to the administration, operation, maintenance, design, implementation, and optimization of complex computational systems. Leveraging your expertise in HPC technologies, you will collaborate with cross-functional teams to ensure the seamless integration and performance of high-performance computing environments.

Responsibilities:

System Administration, Operation, Maintenance, Design and Implementation:

Administer, operate, maintain, design, implement, and maintain high-performance computing systems to meet the organization's computational needs.

Collaborate with stakeholders to understand performance requirements and hardware specifications.

Parallel Computing:

Implement and optimize parallel computing techniques to enhance system performance.

Leverage parallel programming languages and frameworks for efficient task execution.

Cluster Management:

Manage and optimize HPC clusters, ensuring scalability and reliability.

Implement and maintain cluster management tools for efficient resource utilization.

Performance Tuning:

Analyze and fine-tune system configurations, hardware, and software for optimal performance.

Identify and resolve performance bottlenecks in HPC applications.

Job Scheduling:

Utilize job scheduling systems to allocate computational resources and manage workloads efficiently.

Collaborate with users to understand job requirements and prioritize computing tasks.

Networking and Interconnects:

Configure and optimize high-speed interconnects, such as InfiniBand, for fast data transfer between nodes.

Collaborate with network administrators to ensure seamless communication within HPC environments.

Distributed File Systems:

Implement and manage distributed file systems for efficient data storage and retrieval.

Optimize data access and transfer mechanisms to support large-scale computations.

Fault Tolerance and Reliability:

Implement strategies for fault tolerance to ensure system reliability during long-running computations.

Troubleshoot and resolve system issues to minimize downtime.

Documentation:

Create and maintain detailed documentation of HPC system configurations, processes, and best practices.

Develop user guides and training materials for HPC users.

Stay Updated:

Keep abreast of emerging trends and advancements in HPC technologies.

Evaluate and recommend new hardware and software solutions to enhance system capabilities.

Job requirements

• Bachelor’s or master’s degree in computer science, Information Technology, or a related field.
• Proven experience as a Systems Engineer with a focus on High-Performance Computing.
• Knowledge of HPC architectures, technologies, and parallel programming languages.

Technical Proficiency:

• Familiarity with Linux (RHEL, CentOS), cluster management tools, job scheduling systems, and distributed file systems.
• Experience with high-speed interconnects (e.g., InfiniBand) and networking in HPC environments.

Problem-Solving Skills:

Strong analytical and problem-solving skills to address complex HPC challenges.

Communication:

Excellent communication and collaboration skills to work effectively in interdisciplinary teams.

1 Yr Project Renewable assignment

We are presently seeking candidate for the position of Platform Engineer. This role is to engage in various projects and impact assessments related to the data transformations for Finance Technology Systems.

Key Responsibilities:

* Attending impact assessment sessions, and actively participate in reviews with the subject matter experts in Finance Technology.

* Perform impact analysis on the existing system functionalities with respect to the new proposed changes.

* Discuss with requestors to gather and ascertain requirements

* Development/SIT Testing/ UAT Support/Implementation

* Work with users on the requirements/clarifications and attending to UAT queries

* Help to prepare the FS documents and walkthrough the functional specifications with requestors

* Assisting the Stream Lead in the delivery of the project and on the coordination with various stakeholders.

* Step in as a Technical Delivery Manager to manage the end to end delivery of the assignment, when demanded.

* Delver the project / tasks within the committed timelines.

* Maintain the risks and issues tracker and see them to closure.

Key Requirements:

* 2+ years relevant experience in Informatica Power Center (ETL) - (Designer, Repository Manager, Workflow Manager), ETL tools, Oracle 19c (SQL*Plus, PL/SQL) and strong Data Analytical skills

* Strong on DW Fundamentals, concepts

* Understands and review technical requirements, designs ETL process flow and walkthroughs and performs data profiling of required source systems.

* Excellent understanding of various relational database design concepts.

* Extensive experience in Data Modeling & Architecture.

* Experience full lifecycle data warehouse development.

* Strong experience in Data Migration and Data Quality initiatives.

* Error handling and Performance Improvements.

* Conduct and participate in design and code walkthroughs.

* Good hands on capability - can independently develop good quality deliverable and guide/mentor junior team members effectively.

* Experience in Unix Shell Scripting (AIX/SUN/Intel Xeon Linux)

* Experience with Job scheduling tools like Control-M

* Provide ongoing maintenance support for applications and 24/7 stand-by support required.

COMPANY DESCRIPTION

Grocery Logistics Singapore (GLS) a wholly owned subsidiary of FairPrice Group Supply Chain, is a well-established logistics player in the Fast Moving Consumers Goods (FMCG) segment, incorporated since January 1993. Other than being the key logistics provider for NTUC FairPrice and its subsidiaries, we had serviced the Dairy Farm Group, Royal Ahold Group (since exited from Singapore Markets) and many small supermarket chains since our establishment.

RESPONSIBILITIES

The role which is part of the Supply Chain will be responsible for maintaining and improving existing automation capabilities, as well as developing a team of automation and maintenance technicians under the incumbent's charge.

Responsibilities

• Support automation maintenance team in performing regular preventive/corrective/ predictive /conditions based / ad hoc / reliability centred based maintenance on storage systems, equipment, and packaging machines that would ensure optimal operation with minimal disruption to supply chain's operation.
• Support Automation Maintenance Lead on complex diagnostics and repair malfunctioning complex logistics and packaging equipment.
• Support installation, modification, upgrade, and maintenance of storage systems and packaging equipment in project phase as team representative.
• Support automation team in maintaining industrial control systems for automated equipment ( Software / hardware)
• Deep Dive and Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods.
• Provide engineering support for the modifications of robotic and automation systems.
• Work closely with operations and automation teams to ensure that all automation equipment and processes meet safety standards and comply with company policies.
• Support in prepare reports about system performance and breakdowns from technicians, for management.
• To be able to support Automation Maintenance Lead and technicians in identifying and resolving process related issues.
• Work with Team to formulate work instructions / safety risk assessment / Continuous improvement projects.
• Ability to calculate and identify bottlenecks in process flow to prevent bottlenecks and formulate backup plans with the operations team as a preventive measure.
• Any other ad hoc duties as assigned.

• Bachelor Degree is preferable
• Major in Mechanical or Mechatronics or Automation Control
• 3 years'+ working experience in Integrator/ automation equipment manufacture/ warehouse automation project. Or 5 years+ after service experience in automation project
• Familiar with AutoCAD
• Familiar with devices in automation
• Experience in automation control products such as Siemens IPC, PLC, HMI, SCADA, TIA portal, Various drives and Software hardware.
• Able to communicate with oversea IT Online support, Hotline Software Engineers in UK, Australia, Italy and understand the steps to follow up during the troubleshooting.

• Work location: 7 Sunview Road
• Working hours: Monday to Friday, 8:15am - 5:35pm (will move to rotating shift cycles in future)

We are presently seeking candidate for the position of Platform Engineer. This role is to engage in various projects and impact assessments related to the data transformations for Finance Technology Systems.

Key Responsibilities

• Attending impact assessment sessions, and actively participate in reviews with the subject matter experts in Finance Technology.
• Perform impact analysis on the existing system functionalities with respect to the new proposed changes.
• Discuss with requestors to gather and ascertain requirements.
• Development/SIT Testing/ UAT Support/Implementation
• Work with users on the requirements/clarifications and attending to UAT queries.
• Help to prepare the FS documents and walkthrough the functional specifications with requestors.
• Assisting the Stream Lead in the delivery of the project and on the coordination with various stakeholders.
• Step in as a Technical Delivery Manager to manage the end-to-end delivery of the assignment, when demanded.
• Deliver the project / tasks within the committed timelines.
• Maintain the risks and issues tracker and see them to closure.

Key Requirements

· 2+ years relevant experience in Informatica Power Centre (ETL) - (Designer, Repository Manager, Workflow Manager), ETL tools, Oracle 19c (SQL*Plus, PL/SQL) and strong Data Analytical skills

· Strong on DW Fundamentals, concepts

· Understands and review technical requirements, designs ETL process flow and walkthroughs and performs data profiling of required source systems.

· Excellent understanding of various relational database design concepts.

· Extensive experience in Data Modelling & Architecture.

· Experience full lifecycle data warehouse development.

· Strong experience in Data Migration and Data Quality initiatives.

· Error handling and Performance Improvements.

· Conduct and participate in design and code walkthroughs.

· Good hands-on capability - can independently develop good quality deliverable and guide/mentor junior team members effectively.

· Experience in Unix Shell Scripting (AIX/SUN/Intel Xeon Linux)

· Experience with Job scheduling tools like Control-M

· Provide ongoing maintenance support for applications and 24/7 stand-by support required.

Job Description

We are seeking a highly skilled and experienced Network and Communication Engineer to join our team and be responsible in the design, implementation, and support of SIA Group's data centre -related network. The primary objective of this role is to ensure well-designed network architecture and resilience of our network infrastructure to support the Company’s business objectives.

Responsibilities includes:

•Review and improve the network infrastructure’s functionalities and availability, e.g. through automation

•Provide advice and solution for projects to ensure IT services, such as application products, comply with SIA architecture and standards

•Architecture and own technical solutions

•Run large-scale network operations, with strong service management knowledge in a multi-vendor environment

•Have L2/3 experience in various networking technologies including

o data centre networking including SDN (preferably ACI), Load Balancer (GTM and LTM), SASE, DNS, etc,

o automation experience (Ansible or Python)

o security products such as firewall, IPS, WAF; and routing switching such as BGP, OSPF, etc

•Possess relevant knowledge and experience in cloud technologies

•Configure and maintaining monitoring dashboards on NPM and SIEM

•Track, perform POC and plan technology refresh

•Deliver large-scale IT projects on time, within budget and of committed quality and outcome

•Manage outsourced vendor(s) and internal teams

•Lead and coordinate incident resolution across different internal and vendor teams

•Ability to work in a team with 24*7 support

Requirements:

•Degree with 6 - 10 years of network experience in managing network operations in a multi-vendor(s) environment on at least two of the following multiple domains:

o Data Centre Network,

o Security,

o Network Automation

•Relevant certifications in core data centre networking (e.g. Cisco), DC SDN (e.g ACI, VMWare), Firewall (e.g. Checkpoint, Palo Alto, Fortinet), GTM/LTM (e.g. F5), Cloud Provider (such as AWS/Azure) and Automation (e.g. Ansible) are preferred

•Understanding of data centre architectures, experience in planning, design & implementation of data centre infrastructure

•Excellent problem-solving, logical thinking skills to isolate and identify potential issues in a complex environment

•Excellent communication & interpersonal skills, including writing

•Excellent project management skills. Able to run large scale project independently

•Effective communication skills

•Demonstrated keen interest in technology and product knowledge

Responsibilities

• Responsible for the checking and design of mechanical works from concept to detailed design and provision of QP supervisory works for projects
• Endorsement of the authorities’ submissions, supervision & apply for certificate of completion as Professional Engineer (Mechanical) for the projects undertaken by company.
• Conversant and ensure that project complies to local code and authority requirement
• Able to perform analysis and/or guide engineers to analyze and provide technical advice and solutions when working with stakeholders
• Carry out project management, planning, financial management of project, contract administration, ensure key deadlines are met and staff work together effectively
• Liaise with multiple stakeholders for civil & structure, architectural, mechanical and electrical works
• Preparation of tender documents and specifications
• Design management, coordination with contractors, subcontractors and external consultants
• Proactive communication, mentoring and guiding the reporting Engineers and Designers to develop their potential
• Ensure the smooth completion of the project within schedule and budget
• Perform any other duties as assigned

Requirements

• Degree in Mechanical Engineering, or its equivalent
• Registered Professional Engineer with PEB Singapore/ Specialized Professional Engineer
• More than 10 years in the industry
• Experience in both construction management and design
• Conversant in Engineering analysis design software, BIM software, CFD simulations tools and other mechanical/fire engineering software.
• Only Singaporean

If you have the drive and capabilities to take our challenge, please send full details of your experience, qualifications, current and expected salaries via https://hrsembcorp.darwinbox.com/jobs/jobsdetailed/id/a63fef0d591f9c/grp_company/a632dab40df257 .

Only shortlisted candidates will be notified. Thank you for applying.

COMPANY DESCRIPTION

Grocery Logistics Singapore (GLS) a wholly owned subsidiary of FairPrice Group Supply Chain, is a well-established logistics player in the Fast Moving Consumers Goods (FMCG) segment, incorporated since January 1993. Other than being the key logistics provider for NTUC FairPrice and its subsidiaries, we had serviced the Dairy Farm Group, Royal Ahold Group (since exited from Singapore Markets) and many small supermarket chains since our establishment.

RESPONSIBILITIES

The role which is part of the Supply Chain will be responsible for maintaining and improving existing automation capabilities, as well as developing a team of automation and maintenance technicians under the incumbent's charge.

Job Description

• Responsible for testing, operate and maintain automated machinery
• Involve in developing and implementing Logistics System, improvement upgrades, maximize efficiency, control maintenance costs and reduce downtime.
• Prepare project materials, cost analyses, estimate yearly retrofit budget and Spare parts management.
• Train the maintenance staffs for new work methodology, observe team's Safety requirements and provide necessary instructions.
• Maintain the reliability and the performance of the all automation and networks systems in the automation layer.
• Utilize equipment Error logs, Event reports, and analysis data from computerized maintenance systems to track equipment reliability.
• Daily checklists review, records equipment PM Work on internal and external service teams.
• Maintain liaisons with other departments to provide necessary support and assist regular MOM PE inspection.
• Able to communicate with oversea IT Online support, Hotline Software Engineers in UK, Australia, Italy and understand the steps to follow up during the troubleshooting with minimum guidance

• Diploma/Degree in Mechatronics, electrical engineering, mechanical engineering or similar field.
• Experience in automation control products such as Siemens IPC, PLC, HMI, SCADA, TIA portal, Various drives and Software hardware. Knowledge on Auto CAD, Microsoft PowerPoint and Operation System knowledge will be preferred.
• Experience with automation equipment such as Conveyors, Lifter, ASRS. Food Procession machines and robotics systems.
• Skills on the electrical testing equipment, dB readings, Inverters settings, Calibration.
• A highly motivated, self-starter with the ability to work under pressure and Cold Room environment in order to complete the daily Operation functions. ie, Ensuring 24-7 Up running, fast moving technologies, new concepts, complex systems and operation timescales will influence your day-to-day work.
• Strong time management skills, self-motivated and able to complete Logistics Maintenance projects, repairs or troubleshooting.
• Hand-on troubleshooting expertise and attention to details.
• Strong leadership and problem-solving skills.
• Proven work experience in Industrial Automation System.

• Work location: 7 Sunview Road
• Working hours: Monday to Friday, 8:15am - 5:35pm (will move to rotating shift cycles in future)
• The position would need to be on standby for urgent/ad hoc work outside of working hours due to business needs.

• Assist Principal Project Manager (PRPM)/Senior Project Manager (SPM)/Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on-site quality and safety issues
• Determine any non-conformances on works
• Liaise with the Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on-site issues are conveyed to the Contractor within a reasonable timeframe
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggests quality improvement measures for implementation on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Assist in the operating of the PMCC

Requirements:

• Min Degree in Civil & Structural engineering
• Min 2 years of viaduct and/or flyover or cut and cover tunnel experience in a project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Experience in civil/structural/geotechnical design will be an advantage.

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• Min 2 years of experience in geotechnical and deep excavation works
• Degree in Civil Engineering
• Accredited as a RE with IES

Job Description

• Define requirements, specifications and testing criteria for perception algorithms based on customer inputs

• Develop traditional algorithms or AI models for Vision, LiDAR and multi-sensor fusion based perception for autonomous driving

• Object Detection, Semantic segmentation and Multi-target tracking

• Sensor fusion of LiDAR, Camera and Radar

• Evaluation and benchmarking of algorithm performance

• Data and Ground truth preparation

• Detailed Reporting and Documentation

Education and Experience

• Bachelor’s / Master’s degree in computer science or related field.

• Experience of Vision and LiDAR data processing

• Image/Point cloud data pre-processing

• Object recognition and Segmentation

• Extensive experience of one or more of the following

• Deep learning applied to vision, LiDAR

• 3+ years of experience in C++/ Python software development

Preferred Skills

• Experience in the field of robotics, automotive systems

• Proven track record of publications in relevant conferences

• Excellent analytical, communication and writing skills

COMPANY DESCRIPTION

Grocery Logistics Singapore (GLS) a wholly owned subsidiary of FairPrice Group Supply Chain, is a well-established logistics player in the Fast Moving Consumers Goods (FMCG) segment, incorporated since January 1993. Other than being the key logistics provider for NTUC FairPrice and its subsidiaries, we had serviced the Dairy Farm Group, Royal Ahold Group (since exited from Singapore Markets) and many small supermarket chains since our establishment.

RESPONSIBILITIES

The role which is part of the Supply Chain will be responsible for maintaining and improving existing automation capabilities, as well as developing a team of automation and maintenance technicians under the incumbent's charge.

Responsibilities

• Support automation maintenance team in performing regular preventive/corrective/ predictive /conditions based / ad hoc / reliability centred based maintenance on storage systems, equipment, and packaging machines that would ensure optimal operation with minimal disruption to supply chain's operation.
• Support Automation Maintenance Lead on complex diagnostics and repair malfunctioning complex logistics and packaging equipment.
• Support installation, modification, upgrade, and maintenance of storage systems and packaging equipment in project phase as team representative.
• Support automation team in maintaining industrial control systems for automated equipment ( Software / hardware)
• Deep Dive and Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods.
• Provide engineering support for the modifications of robotic and automation systems.
• Work closely with operations and automation teams to ensure that all automation equipment and processes meet safety standards and comply with company policies.
• Support in prepare reports about system performance and breakdowns from technicians, for management.
• To be able to support Automation Maintenance Lead and technicians in identifying and resolving process related issues.
• Work with Team to formulate work instructions / safety risk assessment / Continuous improvement projects.
• Ability to calculate and identify bottlenecks in process flow to prevent bottlenecks and formulate backup plans with the operations team as a preventive measure.
• Any other ad hoc duties as assigned.

• Bachelor Degree
• 3 years'+ experience in control engineer/ commissioning or 5 years+ after service
• Familiar with Siemens PLC
• Good at communication both written and oral
• Familiar with more than one WMS/WCS systems in the market
• Preference for those with supplier management experience (experience in guiding installation and debugging, renovations, etc.)
• Candidate must be comfortable with rotating shift work

• Work location: 7 Sunview Road
• Working hours: Monday to Friday, 8:15am - 5:35pm (will move to rotating shift cycles in future)

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, and other matters concerning the site staff administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that the Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To oversee Tunnelling works
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• Min 2 years of experience in various tunneling works
• Degree in Civil Engineering
• Accredited as a RE with a valid 2022/2023 IES certificate
• Accredited as a RE(Tunnel) with a valid 2022/2023 IES certificate
• comfortable with 56 hour work week

• Project specifications, construction drawings and Building Control Act and Regulations.
• To be overall in charge of the management and control of a team of site staff or Resident Technical Officer(s)
• To provide administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, keep records and process the staff leave entitlement, sick leave, in-camp training and other matter concerning the site staff administrative matters, discipline and welfare.
• To oversee in all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the Superintending Officer.
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To inspect completed work and prepare defects list if necessary.

Requirements

• Degree in Civil and Structural engineering
• At least 5 years of civil engineering experience, of which 3 years must be of Geotechnical such as cut & cover tunnel and deep excavation works.

Possessed a valid RE Cert

Job Description & Requirements

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme withoutcompromising on quality and safety quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Any other ad-hoc tasks assigned by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project workPro-active team player with good analytical and communication skills

Required to have at least 2 years of viaduct and/or flyover construction

• Ensure efficient Civil & Structural and Geotechnical design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical design matters and advises the Senior Resident Engineer (SRE) / Senior Design Engineer (SDE) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical submission and assists the SRE/SDE in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and technical support as required in the evaluations of Contractor's claifications.
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirement

• Minimum Degree in Civil/Structural Engineering or equivalent
• Minimum 3 years of relevant design management/coordination experience on projects similar in nature to the Works in the civil contract including design experience in geotechnical works for deep excavation foundation works
• Team player with good interpersonal and communication skills.

Job Summary

The DevOps engineer will be part of a team to implement, maintain and upgrade DevOps automation tools and infrastructure. The team will automate application deployment processes using industry leading CI/CD pipeline tools, monitor deployment and system performance, and troubleshoot issues. The team is also responsible for ensuring the automation tools are upgraded and patched in a timely manner.

Key Responsibilities

• Coding and developing new DevOps scripts automation with CI/CD pipelines through Jenkins, Cloudbees, Bitbucket, etc
• Supporting and maintaining full stack DevOps toolsets. (Jira, Confluence, Bitbucket, Cloudbees, Jenkins, SonarQube, Nexus IQ, Fortify )
• Able to code, script, automate, innovate full DevOps automation capabilities to enhance and elevate automation from manual human tasks
• Always able to find ways to automate, develop scripts, innovate new ideas to reduce human work and repetitive tasks.
• Deep knowledge on DevOps tools API automation capabilities
• Troubleshoot, deep dive RCA and fix DevOps platform issues
• Supporting DevOps toolsets running on AWS, container clusters and Kubernetes.

What we are looking for

• Deep experience as a DevOps or DevSecOps practitioner in a critical Production environment
• Deep technical experience in server-side Unix/Linux/PowerShell scripting
• Prior working experience installing, configuring, integrating, upgrading and patching CI/CD toolset
• Prior experience is customizing JIRA and Setting up confluence spaces.
• Passionate about cloud infrastructure, CI/CD pipelines and automation
• Ability to easily pick up new technologies: you are keen to learn and to expand your knowledge
• Customer centricity: you always go above and beyond to deliver a first-class service to your users
• Highly proficient with Linux Systems Administration and network fundamentals (IPv4, TCP, UDP, DNS, HTTP, TLS, routing, load-balancing)
• Proficient with AWS VPC, EC2, IAM, S3, EKS, EFS
• Proficient with ELK, Grafana and Ansible
• Proficient with Terraform, Docker/containers and Kubernetes

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

a. Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements

b. To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.

c. To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)

d. To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.

e. To oversee all aspects relating to the construction of the Project, keeping and submitting records.

f. To provide full support and assistance, as and when directed by the SRE or client

g. To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.

h. To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.

i. Any other Adhoc tasks are given by management

Criteria:

- Min 4 years of civil engineering experience

- Min 2 years of experience in geotechnical and deep excavation works

- Degree in Civil Engineering

- Accredited as a RE with IES

Stand in rate to be discussed during interview.

Job scope:

• Interpret project requirements to design, integrate, source and implement electronic system and relevant peripherals to meet projects deliverables on schedule.
• Embedded system design, programming, troubleshooting and maintenance.
• Work closely with mechanical, electrical and software engineers for system integration to meet project deadlines.
• Ensure design, proposal drawings, implementation comply with specifications, requirements, regulations, and quality standards.
• Technical documentations for internal and external customers.
• Prepare accurate operating, design documentation for deployed system for internal use.
• Prepare documentation for external customers and compliance verification.
• Coordinate with local and overseas suppliers for parts, fabrications, and assemblies
• Maintain vendors for services, components and works.
• Maintain part/component/tooling list with proper housekeeping.
• Manage delivery timeline with regards to project schedule.
• Perform ad hoc duties as assigned by management.

Knowledge, skills and experience:

• Bachelor’s degree in Electronic/Electrical/Mechatronics engineering.
• Knowledge on electronic design principles, PCB designs.
• Experience on embedded system, microcontroller and RTOS programming.
• Understand common communication protocols, e.g. RS232, CAN, SPI, I2C etc.
• Hands-on experience is a must, e.g. PCB assembly, troubleshooting and wiring.
• 2 years relevant experience in electronic design and embedded system.
• Valid Class 3 or above driving license is a plus.
• Must be able to read and understand product manuals written in Chinese.
• Can communicate fluently in Mandarin with our suppliers from China and Taiwan.

• Ensure efficient Civil & Structural and Geotechnical & viaduct design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical & viaduct design matters and advises the Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/Project Manager (PM) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical & Viaduct submission and assists the SPM/PM in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and to provide technical support as required in the evaluations of Contractor's claims
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirements

• Minimum Degree in Civil/Structural Engineering or equivalent
• Candidates with contractor's (main/sub) experience are welcome to apply.

Supervise ongoing projects and assist in design office i.e. resolve all technical issue

· Assist in all AC jobs/projects/contract

· Review all the design/checking of calculations for the company

· Represent the company, advise the same and act on its behalf to enable the company to perform its contractual obligations for the projects, as spelt out in the contract documents

· Act on behalf of the company to maintain reputation and goodwill with the clients

· Assist the Managing Director in subsequent tendering of projects and other contracts including but not limited to government projects, private projects, overseas projects

· Attend all site meetings with clients, contractors, QP Design and relevant authorities on matters related to the projects

· Attend meetings with Managing Director on regular basis with the view to report on matters related to the projects and assist in the resolution of issues which may affect the performance of the company in discharging its contractual obligations to the clients

· Promote the employer’s profile and capabilities in the procurement of projects and business development

· Be a management representative of the company for both site and office projects

· Review the design/checking of calculations

· Carry out planning, design drafting, cost estimate etc for the company’s project

· Prepare proposal and performance on tendering works for Consultancy

· Oversee authority’s submission and update of each project

· To cover duties for other Senior/ Design engineers

· Assist in technical design and drafting

· Any other ad-hoc duties as assigned by superior

Criteria:

• Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognized by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on Civil & Structural projects
• Able to problem solve and manage projects