Responsibilities

• Daily Update of Project / Operation Progress to immediate superior.

• To have and maintain good daily attendance and punctuality.

• To update team member at least 2 working days in advance before going for leave , in order to minimize downtime.

• Ensure to know project scope of works and meet the client’s needs as per project standard and requirements.

• Supervise and oversee the sequential activities of Structural, Piping &

Mechanical Equipment (SMP) Installation such as Receiving, Locating in

the lay down, Preservation, Foundation and Structure, Receiving from

Main Contractor/Suppliers/Vendors, Pipe Support Installation, Launching, Fitting and Welding of piping, Flange Alignment, Punch Clearing, Reinstatement, Touch up Painting and Hand Over.

• Must have working knowledge of all applicable piping and structure

standards and recommended practices, e.g. BS, ASME,ASTM,CSA,API etc.

• Managing project scope and change control with commercial or without commercial impact.

• Development of procedures, flowchart or process flow, detailed calculation based on available Engineering information.

• To procure and requisition materials based on interpret construction and technical drawings.

• Communicate with Engineering/technical/quality requirement to team individuals.

• Project Coordinate with Clients, PMD, Procurement, Engineering, Contract & Finance. Departments & Subcontractors and interfaces with other REL' s Business Units.

• Working closely with main contractor and client to ensure the project

meets the required needs.

• Resolve any unexpected technical difficulties for SMP scope and other problems that may arise at any time.

• Oversee the Steel Structural Works, Piping and Mechanical while assist and communicate for any prioritize from Pre-Fabrication required (e.g.

PTREI and Subcontractors).

• Preparation of method of statement, risk assessments for Piping,

Mechanical & Steel Structure Scopes.

• Monitoring and installation supervision with Subordinates to deliver the projects in Safety, Quality and Production manners.

• To liaise with clients representative on all project issues and

subcontractors to ensure safe and efficient delivery of projects to both the company and clients satisfaction.

• Leading the supervisors and foremen in finding and executing solutions to SMP related problems on site.

• Communicating with Project Management Team / QAQC Team to validate and document all changes and highlight to PM for changes that shall involve additional works.

• Assist with the management of internal and external third party interfaces.

• Monitoring and assist of site construction team for Installation, Testing and Pre-Commissioning works related to SMP Scopes.

• Liaise with respective functions or Bu's to prepare project planning,

contracts, procurement, progress reports and claims.

• Timely Setting out the target, plan and accurate achievement including manpower, materials and machineries as per scope and budget.

• To outsource the Shop-Prefab for Piping and Steel Structure Scope, Shop and Field Painting, Galvanising, Metal Roofing, Shop drawings (TEKLA),etc.

• Able to have understanding of systems and subsystems of the plant in order to expediously complete and handover to Client.

• To take note the Variation order (VO) and to take note of any Notice of Delay (NOD) during execution of the project.

• Nominating and training of supervisors, foremen, fitters, welders and

general workers to be capable of doing works well.

• To initiate and undertake action to prevent the occurrence of nonconformity.

• Promote best practice for Safety, Quality and Productivity.

• To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

• To consider HSE aspects when planning and carrying out tasks to

eliminate and reduce HSE hazards, aspects and risks.

Requirements

• Preferably bachelor’s degree in engineering or relevant Pre-U/ A level/

College/ Diploma/ Advanced/ Higher/ Graduate Diploma/ Office Skill

Certificate or equivalent

• Preferably computer literate in MS Office Word, Excel and PowerPoint

• Preferably minimum 3 years’ experience of in oil and gas industry or related field

• Good oral and written communication skills in English

• Positive attitude with good interpersonal skills, excellent problem-solving skills backed by solid technical knowledge

• Ability to work in a dynamic and fast paced environment.

• Able to complete tasks with little or no supervision.

• Motivated Team player

Job description:

• Client currently has several ongoing projects on the Azure platform, including Finance, Commercials, and Operations. This role requires a support engineer primarily focused on existing projects and understanding the team's dynamics.
• The role requires someone capable of directly addressing system issues and resolving them.
• Users report issues, such as error messages and screenshots etc. The data engineer needs to log into the production system, trace processes end-to-end, identify the root cause, and resolve the problem.
• The engineer is expected to verify the accuracy of data and processes, ensuring correct numbers and outputs.)Operations

Requirements:

• At least (2) years of hands-on experience as Azure Software Engineer using:

- Azure Data Factory - Azure Synapse Analytics / Data Warehouse Preferably with relevant certifications from Microsoft including Azure Data

• Preferably with relevant certifications from Microsoft including Azure Data Engineer Associate
• At least (2) years of hands-on experience in

- Implementing Data Quality validation

• At least (2) years of hands-on experience in

- Providing technical support (80%) & enhancements (20%) for existing applications in Azure

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)

• Develop design documentation as per Deliverable List e.g., Process Flow Diagrams, Block Flow Diagram, Piping and Instrumentation Drawings, Process System Layouts, Equipment and Instrumentation data sheets.
• Involved with Senior Engineers for preparation of tender document and tendering activities (tender preparation, tender interview / clarification meetings, evaluate proposals submissions and Tender Recommendation Report preparation).
• Perform engineering reviews on vendor design deliverables to ensure compliance and completeness in technical scope.
• Brief Process Supervisors on the project scope, design details & drawings, project schedule before commencing the project site construction works.
• Involve in daily and weekly meetings for project construction activities and prepare the minutes of meetings, keep records.
• Coordination works with process systems supervisors, construction manager, senior engineers , sub-contractors for daily and weekly process systems construction activities.
• Maintain the project folders and sub folders with relevant project design, safety, construction documents and drawings, conduct monthly reviews with senior engineer and leas engineer.
• Familiar with software design tools Pipe Flo , BIM 360 , Blue Beam, EMP for managing the process system design works
• Familiar with project safety requirements and participate in IFW meetings, project safety meetings.
• Assist Lead/Senior Engineer/s in budgeting and cost estimations for projects.
• Familiar with knowledge Centre and Learned Lessons, study and utilize the temp plates and process system materials to learn and develop the knowledge about the various process systems.
• Assist Quality Assurance/Quality Compliance Manager/Senior Engineer/s in Site acceptance Test and Inspection Qualification.
• Assist Commissioning Manager in system start-up, testing and commissioning and system turnover to client.
• To take role as Work Package Owner (WPO) responsible for packages progress to completion with help of supervisor and final handover documents.
• Participation in Design for Safety during the design stage works
• BIM Modelling internal reviews with BIM/CAD Team, CSA & MEP counter parts and review with client for LOD 400, 450 and 500.

Job Qualifications:

• Bachelor’s Degree in Chemical or Environmental Engineering
• Diploma holders with additional 2 - 3 years’ experience unless equated with professional certifications
• Experience in design and/or construction in either Deionized/Ultrapure Water or Wastewater or Chemical or Gas Systems.
• Understanding of Codes and Engineering Standards of International Clients.
• Conversant in the use of design software.

Requirements:

• Must have minimum of 5 years of IT systems development experience in Banking industry, candidate with design and test case creation experience is highly preferred.
• Must have Business analysis or consulting experience in banking industry, especially overseas remittance area experience is preferred.
• Must have experience in the global BPR and/or system rollout project experience.
• Must have good communication skill in English (both spoken and written). Able to speak in Japanese language in order to liaise with Japanese speaking stakeholders and client.
• Must be proficient in using Microsoft Word, Excel and PowerPoint. XML file format knowledge is also preferred.
• Bachelor’s Degree in any discipline.

Job Summary

The M&E QA/QC Engineer will assist QA/QC Manager in the M&E and piping works for Integrated Waste Management Facility project. He / She should have a proven track record with excellent communication skills and possess strong technical knowledge of mechanical, electrical, structural and piping systems installation, as well as substantial hands-on project quality documentation and turnover experience in the construction sector.

(l) Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities on Piping, Equipment installation.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Ensure identification and traceability of incoming, in-process finished products.
• Stipulate and control adequate criteria for workmanship.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Compile Manufacturing Data Report (MDR).

(ll) Requirements

Education

• Bachelor's degree in Mechanical, Electrical, or a related field.

Experience

• 5 years QAQC experiences in EPC projects.
• Knowledge in Inspection of Pressure Vessel, Piping, FRP tanks, Rotating equipment such as pumps, fans, agitators, etc.
• Knowledge in Non-Destructive Test such as RT, UT, PT, MT and able to interpret test results.
• Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.
• Detail-oriented and have strong communication skills and able to work with people from all levels.
• Experiences in wastewater, desalination, water utility, incineration, power plant packages are preferred.
• Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.
• Strong communication and interpersonal ability, coupled with influencing skills.
• Strong verbal & written communication skills (English and preferably Mandarin)
• Independent and a self-starter, with strong personal drive to initiate and implement.
• Good knowledge of documentation procedures.
• Hands on experience with pressure vessel, PED & MOM requirements, EN standards.

Skills & knowledge

• Profound knowledge of M&E and piping systems and technologies.
• Excellent coordination skills and communication skills in English, both verbal and written.
• Proficient with Microsoft Office such as Word, Excel and Power Point.
• Ability to work with a diverse team.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and ability to work independently with minimal supervision.

Key Responsibilities

Technical Delivery

• Undertake projects related to IT infrastructure (physical and virtual servers, Microsoft Exchange, Office 365, Azure, Active Directory on-premises and cloud) i.e. systems provisioning, installations, configurations as well as monitoring and maintenance.
• Plan, gather requirements, design, implement, test, troubleshoot systems as per system requirements for new or existing systems
• Provide technical support and advice to users on systems-related issues or queries
• Perform systems administration/maintenance and works toward continuous optimization of systems performance
• Standby with on-call availability with varied shifts including nights, weekends and holidays during critical cutovers, L2 support onwards
• Improve governance (policies, standards, guidelines) on successful delivery outcomes e.g. industry compliances, delivery frameworks/playbooks, port-mortem reviews, documentations
• Cross group collaboration
• Work closely with all technical group to on-board technical knowledge of solution offerings, inclusive of vendors and partners as needed

Qualifications/Experience/Knowledge

• Diploma/Degree or other equivalent
• At least 5 years of experience
• At least 2 years of project delivery experience
• At least 3 years of support experience
• Design, implement and support infrastructure projects
• Technical knowledge of on-premises (M365, Exchange 2013/2016) and email infrastructure related areas – Exchange cert renewal, CyberArk Setup
• Technical knowledge of infra stack (AAD, Active Directory migration services 2016/2019, Clustering)
• Hardware experience
  • IBM, Lenovo, HPE, Dell, Huawei
  • Possess strong problem-solving skills and able to prioritize and manage multiple tasks
  • Strong communication skills
  • Strong interpersonal and stakeholder management skills with ability to coordinate between technical and business teams
  • Able to interact with various levels of internal and external stakeholders both in written and verbal forms
  • Demonstrated project management experience handling multiple projects simultaneously
  • Ability to efficiently understand client organizations and their business model and to tailor relevant processes to privacy requirements
  • Added advantages:
  • Powershell scripting
  • ITIL Certification
  • Microsoft 0365/Azure cloud certification

We are hiring for System/Network/Storage Engineers

Responsibilities:

• Data migration.
• User provisioning
• User Training and Support
• Post-Migration support

Required skills and qualifications

Basic Qualifications:

Critical Skills:

• Knowledge of Intune / Autopilot
• Knowledge of windows reset
• Application downloads > recognize if something is blocked (Zscaler knowledge / or know how it works)
• Macro’s knowledge
• Communication skills
• Proactive
• Migrate user profiles, data, and settings to the new IT environment.
• Ensure data integrity and security during the migration process.
• Test and validate migrated data to identify and resolve any issues.
• Create and configure user accounts in the new IT environment.
• Assign appropriate permissions and access rights.
• Ensure seamless access to resources and applications
• Provide training and support to end-users during and after the migration process.
• Assist users with any issues or questions related to the new environment.
• Develop and maintain user documentation and knowledge base articles.
• Monitor the new environment for any issues or problems.
• Troubleshoot and resolve any migration-related issues.
• Provide ongoing support to end-users.
• Strong technical knowledge of IT infrastructure, including hardware, software, and networks
• Experience with end-user migration tools and techniques.
• Proficiency in Microsoft Office Suite and other productivity tools.
• Excellent problem-solving and troubleshooting skills.
• Strong communication and interpersonal skills.

Preferred Characteristics:

• Ability to effectively communicate and instill confidence with peers and all key stakeholders.
• Effective influencing and negotiation skills in an environment where resources may not be in direct control of this role.
• Excellent analytical, strategic conceptual thinking, strategic planning and execution skills.
• Strong business acumen, including industry, domain-specific knowledge of the enterprise and its business units
• Expertise in budget planning and financial management
• Deep understanding of current and emerging technologies and how other enterprises are employing them to drive digital business and how they may be applied to the enterprise to drive digital business
• Ability to manage geographically diverse teams and overcome the culture clashes that may arise
• Ability to drive organizational change and build capabilities that effectively balance the needs for continuously exploiting capabilities to optimize operational efficiency, with delivering innovative and agile IT solutions to enable the business to explore digital business opportunities
• Excellent verbal and written communication skills, including the ability to explain digital concepts and technologies to business leaders, and business concepts to the IT workforce

- Hunter Role

- Working hours: 8.30am to 6.00pm, Mon - Fri

- Working Location: North area

- Travel expenses can be reimbursed.

Job Description :

• Building strong, professional relationships with key personnel to identify and secure new accounts.
• Coordinating the participation of company staff, including support, service, and management teams, to achieve account performance goals and meet customer expectations.
• Achieving assigned targets for profitable sales and strategic objectives within designated accounts.
• Continuously assessing, clarifying, and validating customer needs to ensure ongoing satisfaction.
• Leading the development of solutions that best address customer needs, while ensuring the involvement of all relevant company personnel.

Requirement

• Minimum of 3 to 5 years of relevant experience.
• Experience in the precision plastic and rubber industry will be an advantage.
• Willingness to travel overseas

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email to submit your resume.

We regret to inform that only shortlisted candidates will be notified.

Stafflink Services Pte Ltd

EA Licence No.: 04C4294

EA Personnel: Stella Tan Sin Yong

EA Personnel Reg. No.: R24124127

Responsibilites

• Design, develop, and maintain robust data pipelines and architectures.
  Collaborate with cross-functional teams to integrate data from various sources.
• Implement and manage CI/CD processes to ensure smooth deployments.
• Optimize Snowflake database performance and ensure efficient data storage.
• Utilize Azure Data Factory and the MS Fabric stack for data integration and orchestration.
• Write and maintain detailed technical documentation for data processes and architecture.
• Monitor and troubleshoot data pipelines to ensure data integrity and quality.
• Stay current with industry trends and best practices in data engineering and integration.

Requirement

• Expertise in Snowflake database development.
• Proficient in Azure Data Factory and the MS Fabric stack.
• Experience with Continuous Integration / Continuous Deployment (CI/CD).
• Strong background in advanced data integration and engineering.
  Proven ability to write clear and comprehensive technical documentation.
• Experience with multiple cloud platforms, specifically Azure and AWS.
  Strong problem-solving skills and attention to detail.
• Excellent collaboration and communication skills.
  

Qualifications:

• Bachelor's degree in Computer Science, Engineering, or related field; Master’s preferred.
• Minimum 5 years of experience in a similar role.

The Civil Engineer is responsible for supervising structural projects. They ensure each project is feasible by analyzing local and environmental impacts and making sure that they can be completed on time within the budget restrictions. Other duties and responsibilities may include:

• Considering budget, regulations and environmental hazards during risk-analysis stage
• Preparing material, equipment and labor cost estimates and confirming costs are within the budget
• Forecasting design and construction timeline
• Completing and submitting all permit applications to the appropriate agencies and ensuring projects are compliant throughout the design and construction stages
• Overseeing soil testing to establish soil strength and building feasibility

Job Responsibiltiies

• Prepares key project documentation including purchase specifications for structural items ,
• Develop drawings, design basis, design report and other engineering documentations by utilising engineering common network, software and tools for hull structure basic design and detail design,
• Develop and/or Review structural calculation report , FEM analysis report
• Coordinates with external design house, client, classification/ certificate verification authority on technical issues and design solutions in the awarded project
• Coordinates internally with other departments, i.e. construction engineering, QA, production, procurement team on technical query, clarifications, site query,
• Coordinates internally with other engineering discipline to develop layout drawings, penetrations and reinforcements, resolving interference problems etc,
• Participates in project meeting, attends to basic technical queries and issues related to basic structural design and reviews design deliverables on project facilities, fabrication, transportation and installation
• Liaises with owners, statutory and classification authorities for design compliance review and approval on the proposed project plans in meeting project requirements
• Generates reports on work progress and submits to senior team members for review and approval before submitting to owners, statutory and classification authorities for approval and maintains project database for future references
• Performs studies on a new range of offshore substation, and generates analysis on the basic structure design
• Performs analysis on main structure by generating design stress analysis to ensure design adequacy of structural members and details in main foundational framework
• Provide support to production during project construction phase, prepare lifting padeye drawing for major block lifting, and perform lifting analysis.

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd - Admiratly Yard

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability. We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012

Job Description

• Prepare and review Instrumentation, Control and Automation (ICA) Works specifications.
• Assist the ICA Lead and manage the engineering design works for the Control System Architecture, Data Communication Networks, Functional Design Specification (FDS), Process Control Narrative (PCN) and Process Instrumentation Diagrams (P&IDs), Programmable Logic Controller /Distributed Control System (PLC/DCS) and Supervisory Control and Data Acquisition (SCADA) and any other ICA Works as required.
• Handle equipment package and procurement including technical specifications preparation, technical clarification, technical bid analysis, etc.
• Collaboration with multiple stakeholders including internal teams of different trades, clients, consultants, other packages contractors, sub-contractors and vendors to ensure success of the project.
• Prepare, review and liaison with subcontractor(s) in the design and submission, ensuring all project specifications and design standards are met.
• Work with cross function project team to support project activities, i.e. schedule, process, progress claims, work progress, etc.
• Manage and supervise the project execution, site installation, inspection, testing and commissioning, plant proving related to Instrumentation, Control and automation system and interface works with other disciplines and all stakeholders.
• Attend to clients’ comments and ensure clients’ approval & acceptance to all ICA related design, installation and Testing & Commissioning Works.
• Resolve the site technical related matters.

Design, Engineering, FAT, Installation, Testing and Commissioning of:-

• System Control PLC/DCS and SCADA.
• Input / Output list
• Data Communication Network and ICA Panels.
• Instruments.
• FAT and SAT of Interfacing Panels, Instruments, Pumps, etc.
• Cable Support System.
• Cabling & Termination Works.

Requirements

• Degree in Electrical & Electronic Engineering / Instrumentation & Control Engineering / Advanced Diploma in Process Control and Instrumentation.
• Experience in Selection, Installation, Testing and Commissioning of the Instrumentation.
• Experience in ICA engineering Works, preferably in water/wastewater projects will be an added advantage.
• Experience in Programming of PLC/DCS and SCADA.
• Experience in Project Execution, Supervising and Coordination with subcontractors, consultant and Client.
• Good knowledge in Microstation/Autocad software.
• Good technical understanding and experience in water, wastewater and environmental engineering works.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and ability to work independently with minimal supervision.
• Minimum 5 years relevant experience in engineering, installation, testing and commissioning of ICA Works.
• Able to work in the Tuas South area, in Singapore.

[Job ID: 402945]

Responsibilities:

• Manage the sales of the company’s Injection Molding Machines.
• Maintain relationships with existing customers and actively pursue new clients across Singapore and Southeast Asia.
• Engage in discussions and negotiations with customers regarding pricing and delivery timelines.
• Coordinate with factories in Japan, Thailand, India, and China.
• Work with Japan headquarters to provide updates on sales forecasts and budget reports.
• Prepare technical product documentation.
• Collaborate with engineers and other technical personnel for project alignment.

Requirements:

• 2-3 years of equipment sales experience in a similar industry.
• Solid technical knowledge of Plastic Injection Machines.
• Strong communication skills and a proactive attitude toward embracing new challenges.
• Self-motivated with the ability to work independently.
• Proficiency in Microsoft Excel, Word, and PowerPoint.
• A valid Class 3 driving license.

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference: https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Sandy Ng Mei Qi

EA Personnel Registration Number: R24125475

EA License No.: 07C5771

Job Highlights & Employee Benefits

• Part of a publicly listed company on SGX-ST with a stable revenue stream and growth prospects
• Annual performance bonus
• Annual salary increment
• Team bonding activities and birthday vouchers
• Leave, medical, and dental benefits
• Education sponsorship and fully funded external training

Responsibilities

Reporting to the General Manager, the successful candidate will analyze business needs and operational workflows to implement technological solutions (e.g., Microsoft 365) aimed at reducing manual processes and enhancing efficiency for local and international subsidiaries. Key responsibilities include:

1. Business AnalysisIdentify business requirements and challenges to develop applications that add value
   Collaborate with end-users to pinpoint inefficiencies, bottlenecks, and opportunities for workflow enhancements
   Convert end-user requests into technical specifications
   
2. Microsoft 365 Apps ImplementationOffer expertise and support to end-users on utilizing Microsoft 365 apps for improved efficiency
   Automate manual processes by designing and developing applications using the Microsoft Power Platform, including Power Apps, MS Flows/Power Automate, Power BI, etc.
   Collaborate with stakeholders and vendors to schedule development and implementation of business applications
   Conduct end-to-end testing, troubleshooting, and user support
   Maintain and update developed applications and create user guides for knowledge retention
   Provide technical training to enhance staff skills in Microsoft 365 tools and other systems
   

Requirements

• No prior work experience required, but must have the necessary skill sets
• Strong knowledge of Microsoft 365 technologies, SharePoint Online, and AppSheet is essential
• Proficient in workflow automation using Power Automate is a must
• Familiarity with Business Process Automation, Procurement, and Accounting Systems is a plus
• Holding any of the following Microsoft Certifications is advantageous: MS-900, PL-900, PL-100, PL-200, PL-400, PL-500, and/or PL-600

Additional Information

• Replacement position
• Office location: Pandan Road
• Working hours: 8:30 AM to 6:00 PM (Monday – Friday)
• Company transport provided from Clementi MRT (one-way)
• 3-month probation period
• No AWS; performance bonus based on company profitability and individual merit (historically a minimum of 1 month)
• Annual leave: 15 days (increases to 17 days after 5 years of service and 19 days after 10 years)
• Dental benefits: $250 per year
• Full medical fee reimbursement based on the company's designated GP (excluding pre-existing and chronic conditions)
• Medical leave adheres to the Employment Act

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd | EA License No. 20C0270

TEY WEI JIAN | EA Registration No. R24120855

Responsibilities

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Minimum Qualifications/ Experience/Skills

• Graduate in Electrical/Mechanical Engineering.
• Advanced skills using company software
• Proven ability to communicate well in written and verbal communications
• Design thinking for product inventions and enhancements
• Motivation and commitment to providing interpersonal customer service
• Knowing and applying current industry standards and information
• Soft skills including a positive attitude, flexibility and conflict resolution
• The ability to solve problems creatively on time
• Having up-to-date knowledge and technical skills

Our client is a Water Treatment Industry. Due to their current expansion plan, they are looking for a Purchasing Assistant to join their team, in hopes of developing the current high performing team. They are located in the West.

Key Responsibilities:

• Manage data input, analytics, and maintenance of the Procurement Department’s electronic folders.
• Conduct clerical and administrative tasks within the Procurement Department.
• Assist and support the team with quotation and tender activities.
• Utilize internal Purchase Requisitions to identify and process purchase requirements, ensuring accurate information for the Purchase Order process.
• Monitor and expedite Purchase Orders with vendors.
• Communicate order status updates to internal stakeholders.
• Ensure proper filing and archiving of Vendor Registration documentation.
• Confirm goods receipt for Purchase Orders upon delivery.
• Perform additional duties as required, aligned with the role.

Requirements:

• Possess at least “O" Level or Diploma/ITE certification in Office Skills or equivalent.
• Knowledge of Microsoft Office applications (Word, Excel)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

R24122162 | LAI CHAI LI

Job Title: Contract Execution Engineer

Job Description:
We are looking for a dynamic and results-driven Contract Execution Engineer to oversee the execution of contracts, negotiate vendor agreements aligned with the scope of work, and lead a team to ensure the timely and successful completion of projects. This role demands a professional with strong leadership skills, excellent negotiation abilities, and a focus on delivering quality outcomes.

Key Responsibilities:

1. Contract Execution:Execute contracts in accordance with agreed terms, conditions, and the defined scope of work.
   Monitor adherence to contractual obligations, ensuring compliance with company policies and industry regulations.
   Collaborate with internal teams to align project deliverables with contract requirements.
   Proactively address and resolve any issues or disputes that arise during the execution phase.
   
2. Vendor Negotiation:Negotiate terms with vendors and suppliers to finalize contracts that align with the project scope, budget, and timeline.
   Evaluate vendor proposals for technical, financial, and operational suitability.
   Build and maintain strong relationships with vendors to support project goals and future collaborations.
   
3. Team Supervision and Leadership:Lead, mentor, and supervise a multidisciplinary team to achieve project objectives.
   Delegate tasks effectively and ensure team members have the necessary resources and support.
   Foster a positive work environment that encourages collaboration, innovation, and accountability.
   
4. Project Management:Ensure projects are completed on time, within budget, and to the desired quality standards.
   Develop and monitor project schedules, identifying potential delays and implementing corrective actions.
   Track project progress, prepare status reports, and present updates to management.
   
5. Leadership and Problem-Solving:Exhibit strong leadership skills, motivating and guiding the team through challenges.
   Make informed decisions to resolve issues while balancing project goals and stakeholder expectations.
   Drive continuous improvement initiatives within the team and project workflows.
   
6. Qualifications:

• minimum O level with advanced certificate in work place safety and health, safety coordinator, other construction and process related safety certificates.
• Proven experience in contract management, vendor negotiations, and team leadership.
• Excellent leadership, organizational, and decision-making skills.
• Proficiency in project management tools and contract management software.

Our client is a Water Treatment Industry. Due to their current expansion plan, they are looking for a Purchasing Assistant to join their team, in hopes of developing the current high performing team. They are located in the West.

Key Responsibilities:

• Manage data input, analytics, and maintenance of the Procurement Department’s electronic folders.
• Conduct clerical and administrative tasks within the Procurement Department.
• Assist and support the team with quotation and tender activities.
• Utilize internal Purchase Requisitions to identify and process purchase requirements, ensuring accurate information for the Purchase Order process.
• Monitor and expedite Purchase Orders with vendors.
• Communicate order status updates to internal stakeholders.
• Ensure proper filing and archiving of Vendor Registration documentation.
• Confirm goods receipt for Purchase Orders upon delivery.
• Perform additional duties as required, aligned with the role.

Requirements:

• Possess at least “O" Level or Diploma/ITE certification in Office Skills or equivalent.
• Knowledge of Microsoft Office applications (Word, Excel)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

R24122162 | LAI CHAI LI

Overview:

A Solar Engineer specializes in the design, installation, maintenance, and optimization of solar power systems. Their role is pivotal in the shift toward sustainable energy solutions, as they work on both small-scale residential projects and large-scale solar farms. Solar engineers combine knowledge of engineering, physics, and environmental science to ensure solar energy systems are efficient, reliable, and economically viable.

Key Roles & Responsibilities:

• Design and engineering for Rooftop PV Systems.
• Attend site survey to verify roof layout and SLD’s as per the site.
• Design and engineering of On-Grid, BESS system.
• Design PV Layouts, SLD’s and other drawings etc.
• Design cable trunking and cabling routes and drawings.
• Design PV System according to Local code of practise SP, SCDF, JTC, and relevant authorities.
• Software Knowledge: AutoCAD 2D and PVsyst,
• Coordinate with Project management team to verify design and actual installation works.
• Provide engineering support as needed to the project development and project management team.

Required Qualifications:

1. Education:

• Diploma or Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Renewable Energy, or a related field.

2. Technical Skills:

• Proficiency in solar design software (e.g., PVsyst, Helioscope, or Aurora Solar).
• Strong understanding of electrical systems, power distribution, and energy storage.
• Knowledge of local and international codes and standards related to solar power (e.g., NEC, IEC).
• Experience with AutoCAD or other design tools.

3. Soft Skills:

• Strong problem-solving abilities and attention to detail.
• Good communication and teamwork skills to collaborate with multidisciplinary teams.
• Ability to manage multiple projects simultaneously.

4. Experience:

• 2-5 years of experience in the solar industry or renewable energy sector.
• Previous experience in project management, system design, or solar installation.

Work Environment:

• Location: Solar engineers may work in offices for design and planning, but they also spend time on-site for installation and inspections.
• Travel: Frequent travel to project sites may be required, especially for large-scale installations.
• Working Conditions: Some fieldwork may involve working outdoors, often in varying weather conditions, and can include climbing roofs or accessing elevated areas for solar installations.

Certifications (Optional but Advantageous):

• Safety Certifications related to construction, electrical work, lifting and Working at Height.

Job Description:

· To perform tasks assigned by the superior, to identify and confirm the ambiguous tasks;

· To understand product demand, product industry, market conditions (according to requirements of the purchase form), to endure the authenticity of the supplier quotation; to have preliminary understanding of business terms (payment terms, quality standards, certificates, and delivery) and to assist the supplier management department on the collection of supplier performance appraisal data;

· To develop procurement channels (reduce the intermediate links, complete the development of new products, new markets and new suppliers);

· To collect the user experience, effect, and feedback of products, and report identified issues to superior;

· To think and reflect on problems and issues faced during market survey based on market conditions and seasonal changes, and to timely feedback to supervisor;

· To collect certificates of products and suppliers, and to ensure the authenticity of the certificates;

· To examine the supplier and provide them with feasible recommendations;

· To be responsible for product sampling;

· To be responsible in the data analysis related to the procurement of products;

· To provide tender product information: purchase form, price inquiry table, and etc.

Job Requirements:

· Candidate must possess at least Bachelor's Degree in any field;

· Candidate with strong sense of responsibility, able to work under pressure, and good team player is preferred;

· Proficiency in Microsoft Office;

· Ability to keep company confidence;

· Willing to travel oversea as business trip will be requested

We are seeking a skilled and experienced Deployment Engineer to join our dynamic IT team. The ideal candidate will have extensive experience with hypervisors, network infrastructure, and system services, with a strong focus on deployment and implementation. This role requires a proactive individual who can manage and optimize our IT environment to ensure smooth and efficient deployments.

JOB DESCRIPTION:

· Plan, coordinate, and execute the deployment of virtual environments using vSphere, Nutanix, and Hyper-V.

· Ensure seamless integration and deployment of network switches, firewalls, and storage solutions.

· Implement and manage deployment processes for system services such as Active Directory, DHCP, DNS, failover clusters, file servers, and Certificate Authority.

· Configure and manage deployment environments to ensure optimal performance and security.

· Maintain detailed documentation of deployment configurations, processes, and procedures.

· Monitor deployment processes and environments to identify and resolve issues promptly.

· Perform post-deployment validation to ensure systems are functioning as expected.

· Work closely with development, operations, and security teams to ensure successful deployments.

· Communicate deployment status, issues, and resolutions to stakeholders.

· Develop and maintain automation scripts to streamline deployment processes is a plus.

· Utilize tools such as PowerShell, Ansible etc to automate repetitive tasks and ensure consistency is a plus.

JOB REQUIREMENTS:

· Bachelor’s degree in computer science, Information Technology, or a related field.

· Proven experience with hypervisors (vSphere, Nutanix, Hyper-V) and deployment processes.

· Strong knowledge of network switches, firewalls, and storage solutions.

· Hands-on experience with system services such as Active Directory, DHCP, DNS, failover clusters, file servers, and Certificate Authority.

· Proficiency in automation and scripting tools (e.g., PowerShell, Ansible).

· Excellent troubleshooting and problem-solving skills.

· Strong communication and teamwork abilities.

· Relevant certifications (e.g., VMware Certified Professional, Microsoft Certified: Azure Solutions Architect, Nutanix) are a plus.

Job Responsibilities:

• Perform checks on the structural, architectural and M&E materials/works to ensure that the final touch-up works are ready for inspections.
• Conduct regular inspections to ensure works are in compliance with method statements (in accordance to BCA’s Good Industry Practice)
• Monitor the performance of subcontractor workers for all trades and ensure any defects are properly rectified
• Involved in preparing relevant QA/QC reports
• INvolved in implement QA/QC plans and ensure PPVC quality before delivery
• Ensure the functionality of the product before handing over to buyers
• Assist in preparing for QM submissions
• Assist in yearly ISO audits
• Assess, feedback on the construction process and procedures
• Execute quality control as per site specific materials and Works Quality Plan.
• Conduct relevant training for sub-con and internal staff.
• Issuance and handling of Site Memo.
• Monitor undertaken corrective and preventive actions against non-conformities.
• Arrange and liaise with BCA for CONQUAS/QM assessments.
• Recommends solutions for critical and/or frequent recurring defects to Project Team.
• Ensure all the method statement used has obtained approval from the clients and consultants.
• Follow-up all the required tests as per contract requirement.
• Attend regular site meetings – QAQC, Landscape Coordination Meeting and Client Meeting.
• Attend off-site inspection – Precast and Structural Steel Works (Malaysia and Singapore Factory)
• Follow the developer’s Quality Inspectors (QI) and Customer Service Officers (CSO) for inspection prior to building handover to owners.
• Attend to client ’s defects during Defect Liability Period.
• Assisting in handover of the common areas to management team.

Job Requirements:

• Min Diploma or Degree related to QA/QC or Engineering / Construction related field
• Prior experience related to construction industry (HDB, Condominium projects etc.) is added advantage
• Good knowledge of construction quality control/assurance is necessary

We are seeking a skilled and experienced Virtualization Deployment Engineer to join our dynamic IT team. The ideal candidate will have extensive experience with Citrix Virtual Apps and Desktops, NetScaler, Horizon, or Azure Virtual Desktop. This role requires a deep understanding of Windows client and server operating systems, Group Policy Objects (GPO), and user experience optimization. Proficiency in PowerShell scripting for automation is also essential.

JOB DESCRIPTION:

· Plan, coordinate, and execute the deployment of virtual environments using Citrix Virtual Apps and Desktops, NetScaler, VMware Horizon, and Azure Virtual Desktop. Knowing all the technology mentioned above are a plus.

· Ensure seamless integration and deployment of Windows client and server operating systems.

· Knowledge of virtual environments using vSphere, Nutanix, and Hyper-V hypervisor and cloud platform. E.g. Azure, Aws etc.

· Implement and manage deployment processes for system services such as Active Directory, DHCP, DNS, failover clusters, file servers, and Certificate Authority.

· Configure and manage deployment environments to ensure optimal performance and security.

· Develop and maintain PowerShell scripts to automate deployment, configuration, and management tasks.

· Utilize automation tools to streamline deployment processes and ensure consistency.

· Analyse and improve functionality related to user experience.

· Implement best practices for performance tuning and optimization of virtual environments.

· Maintain detailed documentation of deployment configurations, processes, and procedures.

· Monitor deployment processes and environments to identify and resolve issues promptly.

· Perform post-deployment validation to ensure systems are functioning as expected.

· Work closely with development, operations, and security teams to ensure successful deployments.

· Communicate deployment status, issues, and resolutions to stakeholders.

· Develop and maintain automation scripts to streamline deployment processes is a plus.

· Utilize tools such as PowerShell, Ansible etc to automate repetitive tasks and ensure consistency is a plus.

JOB REQUIREMENTS:

· Bachelor’s degree in computer science, Information Technology, or a related field.

· Proven experience with Citrix Virtual Apps and Desktops, NetScaler, VMware Horizon, and Azure Virtual Desktop. Knowing all the technology mentioned above are a plus.

· Strong knowledge of Windows client and server operating systems and Group Policy Objects (GPO), Active Directory, DHCP, DNS, failover clusters, file servers, and Certificate Authority.

· Hands-on experience with user experience optimization and performance tuning.

· Proficiency in PowerShell scripting for automation.

· Excellent troubleshooting and problem-solving skills.

· Strong communication and teamwork abilities.

· Relevant certifications (e.g., Citrix Certified Professional, VMware Certified Professional, Microsoft Certified: Azure Solutions Architect) are a plus.

Project Summary

• Support Cloud Infrastructure Services and Operations projects

Responsibilities:

• Proficient in implementation, management and troubleshooting of AWS Technologies and Openshift Container Platform.
• Proficient in Operating System such as AWS Linux, Red Hat Enterprise Linux.
• Proficient in IaC concepts and Terraform, CloudFormation.
• Maintain, Manage and Monitor Cloud Infrastructure.
• Resolve IT infrastructure issues.
• Proactive handling of project and supporting project implementation.
• Create high-quality technical documentation.
• Support out of hours work if schedule requires.
• On-board new Cloud technologies, challenge existing implementation in a professional and constructive manner.
• Engage in Cloud security activities.
• Comply with ITSM/ITIL methodologies in day-to-day operations of IT Infrastructure.

Skillset (Must have)

• Terraform
• AWS Cloud
• Linux

Skillset (Good to have)

• CloudFormation
• Project Management
• Cloud Security

SKILLS: Iac, Automation, Terraform, AWS Cloud, Linux

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Job Descriptions:

• Assist the Planning Manager during project execution
• Assist Planning manager in gathering information and data entry
• To check and verify subcontractors programme, project deliverables, site progress with project baseline.
• Preparation of progress reports for submission to client
• Gather site construction / installation progress information and prepare progress monitoring documents.
• Liaising with construction / Installation teams to develop weekly working programme.
• Any other assigned ad-hoc duties

Requirements:

• Degree in Civil Engineering or related.
• Minimum 3 years of experience in construction Industry
• Expertise in Microsoft Office (Excel, PowerPoint), knowledge in Project Management software Primavera is at an advantage.
• Willing to work at West Region
• Good team player and able to work independently with minimal supervision