• Support component selection, engineering evaluation, and testing of parts and sub-modules for vision inspection equipment.
• Develop electrical parts and sub-modules for vision inspection equipment.
• Update product design documents, drawings, and BOM (Bill of Materials).

Requirements:

• Diploma in Electrical/Electronic Engineering or equivalent.
• At least 2 years of relevant working experience
• Proficient in CAD software for electrical and schematic design, as well as PC hardware, Windows OS, and software.
• Knowledge in PCB/PCBA design, fabrication, and testing processes is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Information :

Working Hours : Mon~Fri 8:15am to 5:45pm

*Might required to work onboard the vessel and travel occasionally.*

Responsibilities :

1. Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

2. Maintain quality record and file quality data.

3. Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

4. Ensure that all non-conforming products are not mixed with good products prior to disposition.

5. Authorise the rejection of parts if found unsatisfactory.

6. Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

7. Perform factory routine test and check of switchboards completed in the workshop.

8. Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

9. Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

10. Assist the Manager in quality responsibilities and achieving quality objectives.

11. Maintain good housekeeping in the QA Department.

12. Observe and adhere to safety rules during the performance of every task.

13. Ensure the use of calibrated instrument for inspection.

14. Initiate action to prevent the occurrence of Product Non-Conformity.

15. Initiate, recommend or provide solutions to problem detected.

16. Verify the implementation of solutions.

17. Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

18. Carry out other responsibilities as and when assigned by the superiors.

19. Follow the procedures of Quality Management System for effective implementation and control.

Requirements :

1. 2 years QA Experience in Marine or Industrial

2. Diploma in Electrical Engineering or ITE with relevant experiences

3. Able to speak Chinese

4. Required to work onboard the vessel and travel occasionally.

Interested candidate can send in your resume in Microsoft Words, along with a picture of yourself to :

[email protected]

We regret to inform that only shortlisted candidates will be notified.

Thank you for applying.

Carol Tan

EA License No.: 23C1894

EA Personnel No.: R24121972

• Undertake construction supervision as RE of underground building works and civil infrastructure, involving site inspection, meetings and review of drawings and method statements in accordance to customer specifications, applicable codes, standards and other generally accepted practices
• Carry out independent design checks for temporary formwork and formwork support system
• Keep quality records of all works, monitor and report on work progress
• Review and comment on contractor's submissions
• To review and supervise safety, environmental and health matters
• Station full-time on site to support Senior Resident Engineers (SRE) and the QP(S) with projects
• Requirements:
• Experience in Underground work/ viaduct work
• Minimum Diploma in Civil and/or Structural Engineering from an established institution and/or qualification accredited by JAC of IES/ACES as QSS
• Minimum 3 years of relevant experience as RE for LTA project (MRT, underground, tunnelling works) or PUB project
• Has good working knowledge of Geotechnical and instrumentation works and compliance to Singapore Building Regulations
• Good analytical ability with strong verbal and written communication skills
• Independent, organized with positive work attitude

Responsibilities:

Cloud Services Support:

• Provide advanced technical support for AWS and Azure environments, including troubleshooting cloud services, virtual machines, storage, networking, and security configurations.
• Analyze and resolve issues related to cloud performance, connectivity, and security.

Operating Systems Support:

• Troubleshoot and resolve issues on Linux and Windows servers, including performance tuning, system updates, and patch management.
• Manage and support system configurations and patching, ensuring compliance with best practices.

Active Directory and Related Services:

• Manage and troubleshoot Active Directory (AD) issues, including user account management, group policies, domain controllers, and authentication services.
• Support related directory services such as DNS, DHCP, and LDAP.

Incident Management:

• Respond to and resolve technical support tickets within defined SLAs.
• Escalate complex issues internally or vendor support as necessary.
• Document troubleshooting steps and solutions in the knowledge base.

Experience:

• Minimum of 2 years of experience in technical support or system administration.
• Proven experience with AWS and/or Azure cloud services.
• Strong knowledge of Linux and Windows operating systems.
• Experience managing and troubleshooting Active Directory and related services.

---------------------------

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

An exciting opportunity has arrived at The Garcha Group, Singapore’s luxury boutique hotel group with four hotels in Singapore, all of which are franchised under Marriott International—the world’s largest and most prestigious hotel company.

Marriott Hotels:

· Duxton Reserve Singapore, Autograph Collection

· Maxwell Reserve Singapore, Autograph Collection

· The Vagabond Club, a Tribute Portfolio Hotel

· The Serangoon Club, a Tribute Portfolio Hotel

Restaurants & Bars:

· Yellow Pot, Anouska's (Duxton Reserve)

· Shikar, Cultivate Cafe, Isabel Bar, Officers’ Mess Polo Bar (Maxwell Reserve)

· The Whiskey Library & Jazz Club, Sharab aur Kebab (The Vagabond Club)

· GupShup (The Serangoon House)

Garcha Group Benefits:

· As an associate of a Marriott hotel, you, your parents or parents-in-law, children, spouse/domestic partner, and siblings are eligible for discounts on F&B and room rates in 8,700+ hotels worldwide

· As an associate of a Marriott hotel, you have access to the “Global Learning + Development” tool which creates for you personalised learning experiences designed to help you thrive in your Marriott career journey

· Comprehensive health insurance plan with Raffles Insurance with the option to upgrade at subsidised corporate rates

· 2-night yearly staycation including all meals and beverage (incl. alcoholic) in any of the four Garcha Group hotels in Singapore

· 20% off food & beverage at Garcha Group restaurants and bars and all Marriott hotels

Job Description:

• Review all facilities with an aesthetic eye for detail;
• Be well-organized and able to be hands-on to trouble-shoot and fix issues related air conditioning (Daiken VRV), plumbing, humidity related issues, all M&E issues, service provider management, and optimize efficiency while reducing operating costs.
• "Can-do" attitude with resourcefulness and phenomenal efficiency can set you apart among our candidate pool.
• The goal is to ensure our accommodations is problem-free;
• Managing the upkeep of equipment and supplies to meet health and safety standards;
• Trouble-shoot, plan and coordinate all installations and repairs of (telecommunications, heat, electricity etc.) and refurbishments;
• Hands-on as well as manage the upkeep of buildings, equipment and supplies to meet health and safety standards;
• Inspect buildings’ structures to determine and implement the need for repairs;
• Obtain comparative quotations;
• Review utilities consumption and strive to minimize costs;
• Supervise foreign staff facilities staff (handy-men) and external contractors;
• Control activities like waste disposal, building security etc.;
• Handle insurance plans and service contracts;
• Keep financial and non-financial records;
• Maintain all trackers.
• Any other jobs requested by management.

Job Description

• Industry/ Organization Type: IT / Software
• Position Title: Data Center Engineer
• Working Location: Boon Lay
• Working Hours: 5 days, Mon – Fri (Morning Shift 6 AM – 2 PM / Afternoon Shift 2 PM – 10 PM)
• Salary Package: Basic Salary up to $5,000 + AWS + Bonus
• Duration: Permanent Role

Key Responsibilities

• Perform periodic walk-through, validation of equipment status, amber lights check, etc.
• Review work order requests in the queue and respond to semi-routine work orders by adhering to commitment times.
• Escalate and expedite orders to appropriate teams upon standard operating procedures.
• Rack and stack semi-routine customer equipment tickets.
• Support datacenter standard operating cross-connect work order requests.
• Support standard operating testing and standard operating installations of customer assets.
• Support standard operating procedures of layer 1 cross-connect certification testing.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma / Degree in IT/Computer Science, or related field.
• Minimum 1 year of IT experience or equivalent.
• Prior working experience in a Data Center, Network or Server environment would be an added advantage.
• Must be comfortable with shift rotation.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66104 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Roles & Responsibilities

• To support the construction team for M&E engineering works.
• Responsible for site activities, coordination and supervision works related to engineering and systems design.
• Oversee and ensure all M&E and related works are carried out in accordance with the approved drawings, materials and method statements, specifications and Authority codes and as per requirements of the project.
• Accountable for all M&E works, site inspections, monitoring of progress of work & variation order
• Responsible for ensuring that all M&E works of the sub-contractors are in compliance to the Company’s and authorities’ requirements
• Review M&E drawings and other materials submissions prepare by the M&E Coordinators to ensure that there are no discrepancies and/or conflicts with the architectural and structural elements
• Conduct inspections for all M&E systems.
• Liaise with consultants, clients and subcontractors on M&E works progress, coordination and decisions.
• To involve, support and assist other aspects of operational needs when assigned.
• Determines project schedule by monitoring project progress, coordinating activities, and resolving site problems.
• Prepares project status reports.
• Coordinates structural details and design features within the project.
• Handle any other ad-hoc duties and tasks assigned.

Job Requirements:

• Should have Degree/Diploma in Mechanical & Electrical Engineering.
• Min 5 years M&E building service experience in the construction industry.
• Should be Proficient in AutoCAD/BIM Modelling.

• Assist in organizing and scheduling manpower within the department
• Oversee projects technically, attend yard meetings as needed
• To lead a team of skilled machinists to perform precision on-site machining services on client equipment and machinery
• Set up and operate various In-situ machines for precision work
• Responsible for overseeing and coordinating all activities related to the in-situ crankshaft repairs and maintenance
• Lead and supervise a team of technicians and machinists in performing in-situ crankshaft repairs and maintenance.
• Perform tasks both on-premises and at customer sites, which could be local or international.
• Read and interpret technical drawings and documents to find repair solutions.
• Complete jobs within the shortest possible time frame and coordinate all aspects as directed by the Department Manager
• Regularly update your manager on manpower schedules and project progress. Clear communication ensures that all team members are aligned with project goals and timelines.
• Conduct machine tool preventive maintenance as needed.
• Use all prescribed safety equipment and comply with OSHA rules

Job Description

• Conduct workshops and lead discussions with customers for business requirements
• Perform feasibility study and fit/gap analysis on the requirements
• Liaise with subject matter experts/technical team for the design of solutions
• Perform system configuration and run the unit testing
• Able to coordinate and organize systems integration testing with external parties
• Coordinate and assist the customers during user acceptance testing.
• Coordinate and assist in the reporting of vulnerability assessment and penetration testing
• Work with technical team to resolve issue/bug fixes
• Conduct user training session
• Support UAT & PRD deployment
• Documentation of material required for deliverable (Functional Specification, Test Plan, Test Scripts, Training Material etc.)
• Assist in project management activities by supporting the Project Manager
• Mentor and guide new or junior colleagues
• Perform Ad hoc tasks not limited to the list of responsibilities mentioned above.

Requirements

• Preferably prior business analyst or consulting working experience
• Degree or Diploma in Computer Science, Information Systems, Information/Infocomm Technology, Computer or Electronics Engineering or related discipline.
• Experience in programming languages such as Java and .NET is preferred.
• 2 Years working experience.
• Excellent communication and collaboration skills to work with customers, internal teams and external vendors
• An ability to articulate and clearly communicate complex problems and solutions in a simple and logical manner
• Strong analytical, problem-solving skills and detail oriented
• Able to work independently and as part of a team

• Basic: $2,400 - $2,800
• Working Hours: 5 Days Mon-Fri (830am to 530pm)
• Location: Jalan Kilang Timor, Redhill (Office) / Current project - Jurong or Woodlands Area

Responsibilities

• Assists Project Manager in the co-ordination of project management activities to ensure that projects are executed in a smooth and effective manner;
• Ensures the adherence to the safe work procedure (SWP) established; to inform project manager of any shortcoming in the SWP or risk control measures implemented;
• Ensures the familiarization with the scope of works;
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation;
• Co-ordinates daily activities of workers’ duties and to ensure that they are performed in a proper manner;
• Makes daily checks on work progress, housekeeping and safety implementation on site with safety personnel;
• Documentation on project progress and damage;
• Any other related duties as assigned.

Requirement

• Diploma in Mechanical Engineering or related field.
• Training provided.
• Willing to work in Engineering/Construction environment.

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

• Work Location: Jurong Island (Company transport provided near Jurong East MRT)
• Work hours: 8 am to 4.30 pm (Mon-Fri)
• Salary range: $4000 - $5000 + $200 (site allowance)

Responsibilities:

• Lead daily operation as an HSE Production Engineer to ensure Safety in both daily operation and construction projects at site.
• Lead HSE aspect of operation in risk assessment, Hazop study for new modification projects, changes to operating procedures, site construction activities.
• Review and make list of high-risk activities in the process operation based on Hazop study, have regular meeting with production manager and make plan to improve safety level in such areas of operation.
• Coordinate closely with day production & logistics members for HSE aspect of process operation and ensure safe work procedures are followed.
• Study and review all the safety observation feedback and prioritize based on level of risk to follow up through MOC process. Ensure improvement items are followed by keeping records and timeline.
• Work together with project engineers, production members and maintenance coordinator to ensure safety related projects are followed and implemented in a timely manner.
• Review the emergency and disaster prevention procedures to ensure procedures stay relevant to current operation and up to date.
• Lead and enhance any other HSE related improvement projects/activities.
• To perform any other duties or assignments as assigned by superiors.

Requirements:

• Working experience in the chemical industry
• Deep knowledge of Safety legislation and regulations in the chemical industry
• Diploma / Degree in Engineering, health, safety, or environmental field of study

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

JD:

• Supervise & Coordinate project's day to day activities including installation and coordination with consultants, main contractors and subcontractors.
• Follow up project schedule by monitoring project progress; coordinating activities; resolving problems on time to ensure the project progress on time.
• Determines project schedule by studying project plans and specifications; calculating time requirements; sequencing project elements.
• Guide, provide inputs and comments, for the drafter to prepare installation plan drawings, detailed drawings for mechanical parts like piping layout, piping isometric drawing, pipe supports, process and mechanical plan drawings.
• Controls project plan by reviewing design, specifications, and plan & schedule changes; recommending actions.
• Check, confirm all safety documents and issue work permits to contractors in collaboration with site safety officers, work permit requirements will be trained.
• Assist project manager or procurement incharge in preparation of tender documentation, procurement specification and Bill of quantity.
• Attend the weekly and monthly project meetings to update the status and activity of the project.
• Prepares weekly or monthly project status reports by collecting, analyzing, and summarizing information and trends, recommending actions.
• Manage and coordinate vendors and suppliers during commissioning and testing of the equipment and systems.
• Maintains site safe condition and clean working environment by enforcing internal procedures, rules and regulations.
• Maintains product and company reputation by complying with state and company policy and regulations.
• Contributes to project team effort by accomplishing related results as needed.
• Assist project manager in the preparation of project Capex, budget estimation and cost allocation.
• Conduct Toolbox meetings with safety officers onsite and maintain records.
• Procurement and sourcing of equipment and materials.
• Able to work with drafters to produce Piping drawings, installation drawings, details design.

Requirements:

• Bachelor's degree in Mechanical or equivalent engineering education.
• More than 5 years experience working on site installation coordination and project supervision.
• Experience working at process/equipment construction site, plate installation, EPC, or equivalent.
• With experience in giving inputs in technical design and technical document preparations.
• With experience in piping installation, equipment installation, pipe routing.
• Ability to read, understand & demonstrate the P&ID and PFD drawings to site work.
• Proficient to read and understand engineering plan drawings like piping and pipe support plan, equipment layout mechanical installation plan.

Job Duties

• Reports to Project Manager.
• Overseeing the construction activities and progress, planning, implementation and monitoring work schedules in accordance to the master and detailed work programs.
• Liaise with Consultants on technical issues and coordinate the site activities with subcontractors.
• Lead a group of supervisors and ensure site progress is on schedule.
• Maintain quality standards and carry out site inspections.
• Ensure compliance with EHS requirements, regulations, and best practices throughout the project lifecycle.
• Provide technical guidance during project design and construction phases,resolving technical issues promptly and effectively.
• Support the management of manpower, materials, and equipment to optimize productivity and efficiency.

Requirements

• Recognized Degree in Civil / Structural Engineering or equivalent. PE Board recognized degree is preferred.
• At least 6 years’ experience in building or civil engineering project for senior role.
• Minimum 2 complete cycle (piling to roof) for HDB projects.
• Experience in architectural works will be an advantage.
• Technical competence.
• Knowledge in BIM/VDC is an advantage.
• Positive attitude and good team player.
• Demonstrates a sense of urgency.

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

• Perform end user IT Support
• Perform troubleshooting for client platform related problems
• Support Windows OS, office software, and other Desktop Related Software & Hardware Respond promptly to incident,
• investigate & provide temporary &/or permanent resolution of incidents escalated
• Liaise with support vendors for maintenance, support or issues resolution
• Monitor the agreed service level, document & maintain the configuration of the systems Involve in client platform implementation/upgrade project
• Any ad-hoc duties assigned / required.

Frontend Software Engineer (React.JS)

Location: Central

Working Arrangement: Hybrid

Remuneration Package: Up to $6,500 + AWS + Variable Bonus

About Us:

Join our innovative team as a Frontend Software Engineer and make an impact with your ReactJS expertise. We're looking for a creative and motivated individual to drive the development of engaging user interfaces and cutting-edge applications. In this role, you'll collaborate in a vibrant environment, shaping the future of our web applications while ensuring a seamless and enjoyable user experience.

What You'll Do:

• Transform Designs into Code: Convert design wireframes and visual mockups into high-quality, responsive code using HTML5, CSS3, and WebSocket.
• Develop and Maintain UI Components: Build, test, and maintain dynamic user interface components with a focus on performance and cross-device compatibility.
• Enhance UI/UX: Work closely with our design team to refine and enhance the user experience of our applications.
• Create Reusable Code: Develop modular and reusable front-end components and libraries to streamline future projects.
• API Integration: Connect with RESTful services to ensure smooth and efficient data exchange.
• Collaborate Across Teams: Partner with software engineers, business analysts, and architects to design and implement web-based solutions.
• Support and Maintenance: Deploy applications, provide ongoing support, and resolve any issues that arise during or after hours as needed.
• Optimize Systems: Improve the efficiency of applications, systems, and databases by understanding and enhancing their interdependencies.
• Continuous Improvement: Identify opportunities for process improvements and document your recommendations for team and stakeholder review.
• Ensure Quality: Follow best practices for high-quality development to deliver solutions on time and to specification.

What We're Looking For:

• Educational Background: Degree in Computer Science or a related field.
• Experience: Proven track record in developing web applications and workflows, with a solid grasp of modern JavaScript frameworks, especially ReactJS.
• Technical Skills: Proficiency in HTML5, CSS3, WebSocket, and RESTful APIs. Experience with Git for version control and knowledge of CSS pre-processors (SASS, SCSS, LESS) and bundlers (webpack).
• Collaboration: Ability to work effectively in a team setting, with strong communication and problem-solving skills.

If you're passionate about frontend development and eager to work in a collaborative and forward-thinking environment, we’d love to hear from you!

"By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

Contact you about potential opportunities.

Delete personal data not required at this application stage.

To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Aloysius Tan Sheng Rong - R22110441

ScienTec Consulting Pte Ltd - 11C5781

We are looking for energetic and passionate design engineers to join our Central Engineering Group and be part of an elite team responsible for the development of foundation IP for AI products including memory compilers, logic cells and custom macros of all types on the bleeding edge of process technology. We have multiple positions at all experience levels.

Available Job Responsibilities

• Design and build memory or circuit blocks at the gate or transistor level
• Simulate and analyze the circuit design using transistor level simulators
• Extract the layout and perform post-layout simulations and verification
• Floorplan physical implementation and layout integration of design components
• Integrate characterization flow to extract timing and power information
• Develop scripts to automate characterization flow, simulations, and verification
• Specify and verify various behavioral and physical memory models
• Document the design specifications, behavioral description, and timing diagrams
• Help specify silicon test plan and correlate silicon to simulation data

Preferred Skills

• Good understanding of transistor level circuit behavior and device physics
• Good understanding of signal integrity analysis, EM/IR analysis, and reliability analysis
• Proficiency in running simulators, writing automation scripts, and are tools savvy
• Understanding of memory behavioral and physical models is a plus
• Expertise in memory circuit design is a plus
• Understanding of DFT schemes and chip level integration is a plus
• Good communication, interpersonal, and leadership skills
• Motivated, self-driven and good at multi-tasking
• Passion for solving complex problems and willingness to learn

Qualifications

• Requires a BS in Electrical or Computer Engineering
• Some years of relevant experience is preferable
• Fresh graduates are encouraged to apply

Job Scope:

• Design and develop mechanical and electrical systems for buildings and infrastructure
• Conduct feasibility studies and cost estimates for M&E projects
• Collaborate with architects, engineers, and contractors to ensure project alignment
• Prepare technical specifications and project documentation
• Supervise installation, testing, and commissioning of M&E systems
• Ensure compliance with relevant codes, standards, and regulations
• Perform site inspections and quality assurance checks
• Troubleshoot and resolve technical issues during the project lifecycle
• Monitor project progress and manage budgets effectively

Requirements:

• Possess Diploma/Degree/ in Electrical/Mechanical or equivalent professional qualification
• Proficient in BIM software and AUTOCAD will be an added advantage
• Good interpersonal and communication skills
• Capable of leading CSD/SEM coordination, design interface, coordination for construction of transit project, chair and lead coordination meeting.
• Minimum 5 years’ experience and at least 1 LTA MRT underground projects after tertiary education in related fields for construction supervision of similar scale and complexity.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description

• Industry/ Organization Type: Manufacturing/Construction Machinery
• Position Title: Service Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8.15 am – 5.15 pm
• Salary Package: Up to $4,000 + AWS + Meal Allowance + Company Transportation/Transport Allowance + OT
• Duration: Permanent

Key Responsibilities

• Conduct product delivery training for distributors and customers.
• Provide diagnosis guidance and analysis of fault found to Distributor / End-user, remotely via emails and/or calls.
• Carry out field services at sites in local and ASEAN countries.
• Furnish service report and recommendation of spare parts, assisting Parts team in locating correct spare parts from parts catalogue.
• Furnish Warranty claims and Quality report to drive quality improvement on our products.

APPLY NOW!!!

• Minimum Diploma in Mechanical/Mechatronics Engineering or relevant studies.
• With at least 2 years of relevant working experience in construction machinery industry.
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram.
• Process valid Class 3 Driving License.
• Comfortable with travelling internationally within Asia (Entitled to travelling allowance).

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65794 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Company Profile

M3’s client is an established company with many years of experience in the spray painting and powder coating services in Singapore. They specialize in coating for electrical & electronics consumer products, life science equipment, computer casing and machinery with all possible coating methodology.

Company Location

Woodlands

Working Hours

Mon – Fri: 830am – 530pm

5 day work week

Job Responsibilities

• Develop and optimize sheet metal manufacturing processes such as cutting, bending, stamping, punching, forming, welding, and assembling.
• Select appropriate tools, machinery, and materials for production.
• Create and refine process documentation, including process flowcharts, work instructions, and standard operating procedures (SOPs).

Job Requirements

• Technical Knowledge: Expertise in sheet metal materials, properties, and forming techniques.
• CAD/CAM Proficiency: Familiarity with software like SolidWorks, AutoCAD, or similar for design and simulation.
• Able to interpret engineering 2d Drawings.

Sophia Lu

R1100200

Senior Recruiter

Associate System Engineer / System Engineer (2 years contract renewable)

5 days, 8.30am- 5.50pm

Salary: $2800- $3000 (AE), $3500 (System engineer) + Allowance

Location: East, and clients site whenever required

Job scope:

• To provide support on maintenance project.
• Handle system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.
• Hands on experience in managing LAN / WAN / Routers / Switches / DNS / VPN and Firewall is preferred.

Requirements:

• At least a Diploma in Engineering (Electrical/Electronic), Computer Science/Information Technology or equivalent.
• Must have at least 1-2 years of Server experience
• Able to work on scheduled standby on rotating weeks

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Benefits:

1. Variable Bonus (VB)
2. Attendance Allowances
3. Transport allowance

*No experience needed, training provided!*

Industry: Chemicals/Raw Materials, Manufacturing

Location: Bedok, Bedok North (Near MRT Station)

Position: Mechanical Engineer(Japanese Speaking) (Job ID: 19367)

Working hour: Mon - Fri, 0800-1730

Our client, a well known Japanese manufacturer in resin field, has been looking for a Engineer who can join the company.

Job Description:

➤Responsible for maintenance and repair services for their internal inspection equipment
➤Liaise with Japanese headquarter and counterparts in Malaysia
➤Contact with manufacturers of the inspection equipment in Japan
➤Have some business trips to other countries as necessary
➤Material and report creations with MS Office as necessary
➤Other Ad-hoc duties if assigned by MD

Job Requirements:

➤Fluent in Japanese to communicate with HQ in Japan
➤Good trouble shooting skill
➤Personal-growth mind, motivated to learn something new
➤Person who is communicative, cooperative, and eager to challenge something new
➤Person who is not afraid of making mistakes
➤Basic PC skills(Microsoft Office)

We regret that only shortlisted candidates will be notified. Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Thank you for your understanding and co-operation!

Lee Xin Hui

EA Registration No: R22108046

Pasona Singapore Pte Ltd

1 FINLAYSON GREEN ＃09-02 SINGAPORE 049246

EA License No:90C4069

About Cynapse

Cynapse is an awarded AI Software Product company specializing in Enterprise-grade Vision AI in highly challenging environments. cynapse’s software platform is leveraging cutting-edge cloud/on-premise/edge platforms, advanced computer vision algorithms, advanced ML concepts & models, and more.

The company Headquarter is located in Singapore (one-north Area)

Job Description

Cynapse is looking for a talented and highly motivated Computer Vision & Machine Learning Developer to join our AI team that delivers a challenging, enterprise-scale Video Content Analytics solutions to global customers. You will conform to high standards of design and coding, working in a cutting-edge, dynamic and professionally challenging environment.

Responsibilities

• Develop advanced video/image analytics technologies using both Computer Vision Algorithms and advanced ML/DNN
• Research technologies and concepts in the areas of Machine Learning, Computer Vision and Edge AI
• Participate in system design activities, prototyping and testing
• Follow and contribute to software development best practices

Qualifications

• At least a Bachelor’s Degree in Data Science, Computer Science, Engineering or similar
• Experience in developing Computer Vision applications, i.e. object detection & classification, object segmentation, computer vision algorithms, ML models optimization, etc.
• Experience with ML/DNN in at least one of the following frameworks: TensorRT, Tensorflow, Keras, PyTorch
• At least 2 years of experience with C++

Personal Competencies

• Innovative, motivated and a quick learner
• Ability to work well in a small team and take end-to-end ownership of problems and their resolution
• Attention to detail, curiosity, and passion for technology

Benefits

• Competitive base salary and a generous stock option package
• Unique opportunity to work with a talented global team on cutting edge technologies
• informal and exciting work environment with flexible hours

Due to the nature of the role, the position is considered for candidates that are only based in Singapore

Job Type: Full-time

Benefits:

• Health insurance

Schedule:

• Monday to Friday

Supplemental Pay:

• 13th month salary

Experience:

• Computer vision: 3 years (Required)

Work Location: In person

Summary:

• Basic up to $6000 (Senior), $5000 (Junior)
• Performance bonus
• Location: AMK / YCK / Central
• 5 days work week
• Familiar with ACMV
• Career advancement & stability

Key Responsibilities:

• Manage and lead the electrical team
• Perform engineering duties: design, engineering calculations, planning, tender and etc
• Perform testing and commissioning of ACMV electrical system
• QA/QC
• Resolve any technical issue during any stage of the project
• Liaise with clients, project manager, contractor and etc
• Ensure the team follows all electrical codes and standards
• Other relevant ad-hoc duties

Key Requirements:

• Min 5 years of relevant experience in Construction Electrical field, including testing and commission
• Familiar with ACMV

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job Description:

• Manage projects and renovations for hospitals, medical centers, and related units.
• Track and support preventive maintenance, service contracts, and car park operations.
• Assist with assigned projects, ensuring they meet deadlines and budgets.
• Solve problems independently and work well with various departments.
• Oversee contractor and vendor schedules to minimize disruption.
• Coordinate with colleagues and contractors to maintain equipment and facilities.
• Perform other duties as assigned by supervisors.

Requirements:

• Degree in Facilities Management or related course
• No need experience , On Job Training Provided ( Pay Range if no experience : 3K - 3.4K*, Exp : Up 4.5K )

All qualified applicants, please click “ APPLY NOW”

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599