What you will do

• Responsible for physical design and development activities of MediaTek Ghz, AI processors and neural network DSP
• Involve in activities encompass physical design and analysis of complex and timing-critical AI processors and neural network DSP Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing, power optimization and physical verification
• Work closely with MediaTek colleagues in Taiwan and Singapore in implementation methodology co-development and flow deployment

What you will bring

• Bachelor/Masters Degree in Electrical/Computer Engineering
• High-speed NPU/GPU/CPU Subsystem RTL Integration experience or IP/Block/SoC Design experience is preferred
• Experience with Synopsys ICC2/FC (preferred) or Cadence Innovus tools from netlists to GDS
• Experience in high-speed processor implementation/power reduction flows and methodology from RTL to GDS (including synthesis, floor-planning, placement, CTS, routing, timing optimization, physical verification)
• Experience with power noise and reliability tools such as Redhawk and Voltus
• Experience with timing signoff tools such as PrimeTime and Tempus and timing closure tools such as Tweaker and PrimeClosure
• Knowledge of high-speed/low power IP and custom circuit design
• Good communication and scripting skills

Location: One North, Singapore

Important Note: This advertisement is not for immediate hiring but is intended to identify suitable candidates for future openings in this position.

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Company

At CoNEX Healthcare, you can begin a life-long career of exploration and innovation, while helping to champion healthcare innovations for all, particularly in patient safety, nursing productivity and independent ageing. You'll thrive in a closely-knit and driven multidisciplinary team with purpose, breaking down barriers to innovation in a purposeful and productive healthcare ecosystem.

Learn more about CoNEX Healthcare here: www.presage.health

Job Description

The software support engineer is responsible for providing technical support with the Pre-deployment setup and post-deployment support from end-users in Hospitals, Nursing homes or other healthcare institutions.

• Assist with Pre-Deployment setup; preparation of device software after hardware assembly.
• Perform Software Updates to operational devices whenever needed.
• Perform diagnosis, and troubleshooting of technical issues.
• Provide Technical support (L1/L2) to users. There will be occasional need to respond to system issues beyond working hours on a 24/7 basis

Job Requirements

• Experience with working in Linux OS environment.
• Knowledge in working with Edge devices and peripherals (e.g: Bluetooth, Wi-Fi technology, Device Networking, etc.)
• Programming skills preferred (Bash scripting, Python, C++).
• Good communication skills and experience in working with end users on providing technical support.

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Position:- Resident Engineer (M&E)

Working hours

Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Degree in Mechanical or Electrical Engineering or equivalent.
• Possess at least 8 years of relevant and practical experience on site;

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local mechanical & electrical codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

Job Description:

• Architect and lead the development of high-performance, user-centric iOS applications.
• Serve as a technical authority, providing guidance and expertise across projects.
• Collaborate with stakeholders to define technical roadmaps and strategies.
• Ensure application reliability, scalability, and maintainability.
• Conduct deep code reviews and maintain high-quality standards.
• Stay updated with emerging technologies and drive their adoption.

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Engineering, or a related field.
• 7+ years of experience in iOS development, with experience in leading large-scale projects.
• Mastery of Swift, Objective-C, and iOS development frameworks.
• Extensive experience with performance optimization and profiling tools.
• Advanced knowledge of mobile security standards and practices.
• Proven experience in mentoring senior engineers and influencing technical direction.
• Strong strategic thinking and problem-solving skills.

Job title: IT Engineer

Work Location: Singapore, On-Site

Position Overview:

The IT Engineer is responsible for the IT Operations and Maintenance of the company. You will work closely with our Global IT Department to ensure the optimal performance, security, and reliability of our IT infrastructure.

Responsibilities:

IT Environment and Policy:

• Ensure a seamless IT working environment by implementing and enforcing IT policies and procedures according to our company guidelines.
• Provide responsive IT Helpdesk services and conduct necessary training sessions internally to enhance team proficiency.

IT Procurement Management:

• Oversee IT procurement activities, including but not limited to laptops, desktops, monitors, accessories, network devices, and software.
• Collaborate with vendors to ensure cost-effective and timely acquisition of IT equipment and services.

Server Management:

• Install and provide support for server hardware and operating systems.
• Manage Microsoft Active Directory, ensuring user accounts, permissions, and security policies are properly configured.
• Configure and maintain essential server components such as Antivirus servers, File and Print infrastructure, and other critical services.

Networking:

• Monitor, manage and enhance WAN/LAN accessibility and security.
• Collaborate with the network team to optimize network performance and address issues promptly.
• Implement improvements to ensure the reliability and efficiency of the network infrastructure.

Security Services:

• Implement and enforce IT security policies to safeguard organizational assets.
• Conduct vulnerability management to identify and address potential security risks.

Qualification/ Requirements:

• Bachelor’s degree or higher in Computer Science or related technical field.
• Minimum of 3 years of practical experience in IT.
• Hands-on experience in networking configuration, IT device maintenance, troubleshooting, and security reinforcement.
• Familiarity with Linux operating systems and system optimization is a strong plus.
• Proactive approach to handling responsibilities with a strong sense of duty.
• Excellent communication skills to effectively interact with team members and end-users.

Joining Razer will place you on a global mission to revolutionize the way the world games. Razer is a place to do great work, offering you the opportunity to make an impact globally while working across a global team located across 5 continents. Razer is also a great place to work, providing you the unique, gamer-centric #LifeAtRazer experience that will put you in an accelerated growth, both personally and professionally.

Job Responsibilities

• Help create immersive gaming experiences with a focus on innovation and creativity.
• Commit to developing phenomenal products that stand out and make a significant impact in the gaming industry.
• Work closely with cross-functional teams to rapidly prototype, design, and implement innovative ideas and projects.
• Provide development assistance at the system level to other departments as needed, ensuring seamless integration and functionality.
• Generate comprehensive documentation, including technical and functional specifications, to support project development and implementation.
• Participate actively in agile planning sessions, contributing to scope estimation and project planning for team initiatives.

Pre-Requisites

• BS/MS in Computer Science/Engineering or related field.
• 5+ years of software engineering experience.
• Extensive programming experience in C/C++.
• Experienced in developing system applications for Windows/MacOS/Linux/Android.
• Experienced in Driver development on Windows/MacOS/Linus/Android.
• Experienced in complex computation in 3D space.
• Experienced in game engines (Unreal and Unity).
• Strong analysis and problem-solving skills.
• Ability to work independently and collaboratively in a small team.
• Knowledge of game development a plus.
• Is a gamer.

As a key member of the mechanical engineering team, you will work on cross-functional team projects to develop and deliver new and innovative technical solutions for a robotic surgical system. Specifically, you will provide mechanical and mechanism engineering expertise in the R&D of surgical instruments. You will be working on designing mechanisms, structures and integrating actuators, motion components, and sensors to achieve innovative product functionalities.

The challenge for you is to successfully design and develop the surgical instrument in collaboration with other engineering teams, to achieve an efficient operation, reliable and safe product for clinical applications.

Requirements

· Bachelor or Master in Mechanical engineering.

· 5 - 8 years’ experience in the design & development of surgical instrument.

· Experience at least one cycle of product development.

· Able to communicate and write documents in Chinese (preferred).

· Familiar with regulatory and compliance requirements for the development of medical product.

· Strong technical capability in mechanism design and fabrication of precision and micro instruments.

· Strong technical capability to understand designs for mechanical structure and electro-mechanical assemblies.

· Good knowledge of various materials (metal and plastic), coating and manufacturing processes for precision parts.

· Proficient in 3D CAD modelling and simulation software like SolidWorks.

· Good knowledge and experience in GD&T, tolerance stack-up analysis.

· Good knowledge and experience in performing FEA and motion analysis and technical review of mechanism design.

· Able to travel on short notice for short period.

Desirable Traits/Personality

· An analytical problem solver to identify root causes, devise/evaluate/recommend optimal solutions to prevent future issues.

· Strong interests in surgical robotic system and instruments for medical application.

· Able to communicate technical information and build interpersonal relationships with the team members.

· Able to work independently and driven to achieve high standards.

· Intellectual curiosity about new technologies and innovations.

· Creative with critical thinking ability.

· Last but not least, a fun person to work with.

Responsibilities

· Work with cross-functional teams on detailed mechanical design at system level, sub-systems, modules, and components level.

· Support and review critical technical development related to precision mechanical instruments.

· Resolve issues and improve product reliability.

· Ensure the design and functionalities meet user needs, able to meet cost target and quality specifications.

· Perform analytical studies, risk assessment, mechanical verification, and validation.

· Co-ordinate design and fabrication activities locally or with overseas partners.

· As a mentor to junior engineers and enhance their knowledge and skills.

Ensure proper documentation (Design History File) for mechanical design.

About Us: We are a leading AI and robotics company at the forefront of technological innovation, dedicated to creating cutting-edge solutions that revolutionize industries. As we continue to grow, we are seeking talented Software Engineers to join our team.

Job Description: dConstruct is hiring Software Engineers who will be developing our robotics software stack and helping to perform software integration for specific use cases. You will be coding, calling into our software stack and creating applications which utilise our software stack to meet the needs of clients. You will be working with clients to understand their needs and in turn, implement their requirements accordingly. At the same time, you will be familiarised with the entire robotics development and software workflow.

Responsibilities

• Develop and integrate functionality from our software stack for external clients.
• Lead the test of applications and software integration works you create.
• Occasionally aid in tests and deployment of our robots in real world environments.

Requirements and Skills

• Good foundation in modern C++ programming
• Strong foundation in Data Structures/Algorithms
• Understand concepts in memory allocation, cache performance, data-oriented programming
• Comfortable in writing and debugging high performance native code
• Comfortable working on large code bases
• Able to do technical communication to understand and explain the needs of end-users
• Able to work independently with some guidance

Bonus Requirements and Skills

• Familiarity with Golang
• Understanding and familiarity with 3D Data Structures/Algorithms
• Experience with video and audio streaming

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

IC Designer, designing high frequency circuits targeting for transceiver applications, employing CMOS technology. The candidate needs to come up with novel architecture with speed, power, and area advantage compared to existing architecture.

The job also includes circuit design, pre and post-layout simulation, mask layout and PCB testing.

Qualifications

• Bachelor or Master degree in Electrical Engineering.
• Experience in EDA tools usage, including Cadence, Spectre, EMX, Synopsys, as well as Matlab.
• Some knowledge on communication system, such as BER, eye diagram, modulation/demodulation, pre-emphasis and etc.
• Open to Fixed Term Contract.

Job Descriptions

• Pre Project site evaluation of electrical product/meter location and perform range test
• Develops wiring diagrams, layout drawings, and as built drawings for system or equipment modifications or expansion and directs personnel performing installation and maintenance duties.
• Installation, testing and commissioning of repeaters or wireless devices
• Follow safe work procedures to remove/ Install electrical products/meter on site
• Conduct Testing and commissioning of installed electrical products
• Ensure Testing and Commissioning reports in proper order
• Preventive Maintenance (Thermoscan/ Eeprom Downloading/ Data/System Backup)
• Perform troubleshooting and perform appropriate corrective solutions for operational equipment where appropriate
• Soldering of electronics parts
• Internal wiring/ assembly of electrical products/meter
• Burning of firmware
• Testing of defective meters
• Project Coordination to ensure works being carry out as per schedule given by working with partners or contractors
• Manage enquiries, feedback and any other operational issues
• Carries out Site survey, Project management, documentation, testing, user training and commissioning
• To ensure timely completion of schedules and new projects start up through efficient coordination of all function groups both internal and external.
• Team player

Requirements:

• Minimum ITE, NTC/ITC, NITEC in Electrical Engineering or any similar qualifications
• Ability to read and comprehend electrical drawings
• Knowledge of firmware is a plus
• Ability to multi-task and effectively manage concurrent initiatives
• Strong interest in electronics engineering and firmware
• Ability to work effectively in a dynamic working environment.
• Applicant must be willing to work during weekend when required.
• Able to draw Autocad (Would be advantage)
• Minimum 3 years relevant experience

Only shortlisted candidates will be notified.

As a Software Engineer (C++ / C#), you will be a critical team member and fully responsible for developing graphics components for our products. In this role, you will work closely with product managers, UI-UX designers and the R&D team to collaboratively solve real-world problems.

What will you do

• Design, build and maintain efficient and reliable software modules for Screening Eagle software products.
• Develop tools for real-time interactive 3D graphics applications.
• Assist other team members to implement next generation NDT solutions.
• Collaborate with team members to integrate the components to desktop, mobile and web platforms end products.

What do we expect

• BA/MA/MS/PhD degree in Computer Science, Computer Graphics, or strong experience in 3D Games / 3D experiences.
• Proficiency in C++11 and above.
• Proficiency in C# and Unity.
• Good understanding of software design patterns.
• Good knowledge of data structures and algorithms for OOP.
• Good understanding of memory management in non-garbage collected environments.
• Familiar with memory and CPU usage optimization.
• Familiar with 3D graphics pipelines and optimization techniques.
• Solid linear algebra knowledge.Experience in developing for and integrating third party software on desktop, mobile and web tech stacks.

Responsibilities:-

• Ensure precast produced in accordance to shop drawings
• Update of precast production status
• Carry out checks between precast plants
• Ensure precast quality in accordance to specifications

Requirement

• Minimum 2-3 years’ experience in precast management as a supervisor /
• engineer
• Able to work independently with minimal supervision
• Applicants with Precast Concrete Construction Course certification will have an
• advantage

The Service Provisioning Engineer is responsible for planning, configuring, and deploying telecommunication services to meet customer requirements. This role ensures efficient provisioning of voice, data, and internet services, working closely with internal teams and external clients to ensure high-quality service delivery and customer satisfaction.

Make an Impact by:

• Service Deployment: Configure, test, and activate telecommunication services, including voice, ethernet, and DWDM services.
  Implement network solutions to meet customer specifications and contractual commitments.
  Perform end-to-end service testing and troubleshooting during the provisioning phase.
  Integrate new customer services into existing network infrastructure.
  
• Technical Support: Provide technical guidance to customers and internal teams during service activation.
  Diagnose and resolve provisioning issues within SLA guidelines.
  Provide Level 2/3 technical support for provisioning-related issues.
  
• Collaboration: Coordinate with network engineering and vendors for smooth service implementation.
  Work with third-party vendors and partners to deliver seamless connectivity solutions.
  
• Documentation and Reporting: Maintain accurate records of provisioning processes and configurations.
  Prepare and update technical documentation, workflows, and user guides.
  Generate reports on service delivery performance and provisioning timelines.
  
• Process Improvement: Identify areas for improvement in the provisioning process to enhance efficiency.
  Assist in automating repetitive tasks and optimizing workflows.
  

Skills for Success:

• Diploma in IT or equivalent.
• Ability to work under pressure and meet tight deadlines in a fast-paced environment.
• Minimum 3 years of experience.
• Working on Saturdays (9am – 1pm) on a rotating basis will be required after the candidate trained.
• Working on rotating after office hours standby will be required after the candidate is trained.

Roles & Responsibilities

About HOYA Surgical Optics (HSO)

HOYA Surgical Optics (HSO) is the globally leading Preloaded Intraocular Lens (IOL) focused company that provides technologies and solutions that exceed expectations, enabling ophthalmic surgeons to focus on restoring sight. We are dedicated to improving the vision and quality of life for millions of people suffering from cataract, and helping them celebrate life visually.

HSO empowers cataract surgeons all over the world with innovative ophthalmic devices and services, with an attention to detail that helps them achieve better surgical outcomes and better practice results. Our commitment to delivering these results is grounded upon a quality management system that is continuously improving to meet changing global regulatory requirements and our entrepreneurial drive to be the brand of first choice.

At HSO, People is the key factor to our success. We aim to create a conducive work environment for our employees around the globe, and to promote an inclusive culture based on our core values – Excellence, Passion, Innovative, Collaboration, and Accountability.

HSO way of working

In fulfilling our roles, we are

• Accountable for our own capabilities and development,
• Focused on delivering results without excuses, and
• Alive to the sensitivities, risk, and impact we have on others and work in a way that helps others do their work effectively.

We are looking for people who

• See beyond themselves and are impact-focused,
• Consider the needs, challenges, and objectives of every person with whom they interact, and
• Exhibit positive reinforcement to help others succeed.

About the role

Works closely with and has impact on: Support production and operational functions.

Reports to: Global Service Lead, Cloud & Data Centre

Function: Global IT

Work Location/Site: Singapore, Global Headquarters

Role Overview

The Senior Global Infrastructure Engineer is part of the Global Infrastructure and Operations Team to ensure the stability, security, and efficiency of IT infrastructure services globally. The role is responsible for overseeing and managing Organization’s Azure cloud and on-premises IT Infrastructure. This role requires a proactive individual with strong technical skills and project management.

Duties and Responsibilities

1. Azure Cloud Management

• Deploy, configure, and maintain Azure Virtual Machines to meet organizational requirements.
• Design, implement, and manage Azure virtual networks, subnets, and connectivity solutions.
• Deploy, configure, and maintain Azure storage.
• Manage Azure Backup and disaster recovery to protect critical data and systems.
• Administer and secure access to Azure resources using IAM best practices, policies, and RBAC configurations.
• Set up, manage, and optimize AVD environments.
• Configure and utilize Azure Monitor for performance tracking, log analytics, and proactive issue resolution.
• Develop and enforce governance standards using Azure Policy to maintain compliance across the organization.
• Monitor and optimize Azure resource utilization and cost.
• Ensure timely patching and updating of Azure-based resources to maintain security and compliance.

2. Window Server Administration

• Install, configure, and maintain Windows Servers in VMware environment to ensure service delivery.
• Continuously monitor and optimize windows server performance, perform configuration changes to ensure optimal functionality and minimize downtime.
• Manage server roles and features such as AD, DNS, DHCP and file services.
• Implement and enforce Group Policies to maintain security and compliance across systems.
• Perform regular system updates, apply patches and backups to keep systems secure.

3. Storage and backup

• Implement, maintain, monitor and troubleshoot storage issue for SAN and NAS.
• Monitor storage performance and capacity, perform optimizations to maintain efficiency.
• Implement, maintain, monitor and troubleshoot Veeam backup.
• Ensure compliance with data retention policies and regulations.

4. Project Management

• Leading the implementation of IT Infrastructure projects.
• Deliver project scope, and deliverables as per agreed schedule.
• Proactively coordinate and communicate with stakeholders and team members.

5. Documentation and Reporting

• Maintain comprehensive documentation of IT infrastructure and processes.
• Prepare regular reports on IT infrastructure availability, performance and project status.

Experience

• 8+ years of experience in IT infrastructure management.
• Professional certifications e.g. Azure Administrator Associate, Window Server Administration, and VCP are highly desirable.
• Strong technical expertise and hands-on experience in Azure infrastructure solutions.
• Strong technical expertise and hands-on experience in Window Server services, Domain Controller, VMware, Netapp storage, Veeam backup.
• Experience in Linux environment is a plus.
• Ability to express thoughts and complex IT solutions clearly and in a simplified manner.
• Excellent problem-solving and analytical skills.
• Proven experience managing infrastructure projects and out of the box thinking to resolve challenges.
• Strong communication and interpersonal skills.

Skills/Accreditations

• Fluency in Mandarin language is a plus.

Academic Qualifications

• Bachelor’s degree in Computer Science, Information Technology, or any diploma with an IT background

Travel requirements

• Occasional

*Position title and salary will be commensurate with relevant experience and qualifications.

By submitting your application, you consent to HOYA Group collecting, disclosing, and retaining your personal data for employment assessment and verification purposes.

If you are shortlisted, we will contact you within three weeks of your application. Thank you for your application and understanding.

Job Description:

• Prepare project proposals & review, and seeking for approvals. Management team and Team Leaders will provide guidance. project team, management and customers.
• Work closely with business team to handle customers. Support business team for any escalations from customers.
• Organize and ensure key project milestones are achieved, eg Design Review, Factory Acceptance Test, Site Acceptance Test, etc…
• Closely monitor progress with project Gantt chart, budget and scope of work. Resolve conflicts, remove impediments, and foster positive work environment for project team.
• Manage and maintain project documents and artefacts.
• Manage and facilitate productization of projects with manufacturing and aftersales team.

Requirements:

• Min Bachelor’s Degree, preferably in an engineering field
• Knowledge in financial accounting, systems engineering, alternative and/or clean energy is advantageous
• Proficient with MS Project or similar, MS Office Suite of tools
• Fluent in English and writing skill of clear and concise reports
• Excellent communication skill, patient and precise
• Proactive team player, also able to work independently
• Motivate others and yourself

Responsibilities:

• Work within a cross-functional team of robotics scientists and engineers to develop next- generation autonomous mobile robots (AMR)
• Design, develop, prototype, integrate and test advanced robotic mechatronic system and sub-system (sensing, manipulation, control, human-interaction, etc…)
• AMR setup, integration, programming and testing using different brands of mobile robots and mobile manipulators, including proprietary robots
• Providing hands-on on-site support for mechatronic system development, integration, testing and troubleshooting of AMR platforms
• Translate new technology and research outputs into modular and re-useable mechatronic sub-systems to be integrated into various AMR platforms
• Design of experiments to benchmark system performance by adopting in-house and/or industrial test methodology
• Troubleshooting of robotic system / subsystem / module using development tools, specialized equipment and standard lab equipment
• Adopting latest standards and/or methodology to work (standards, open source, common platform)

Requirements:

• Degree/Masters in Mechatronics or Electronics Engineering or equivalent
• 4-6 years of relevant experience in mechatronic system design, development, and integration
• Passionate in robotic manipulation, sensing/perception and control system design, prototyping and practical problem-solving; with hands-on experience with robotics system / hardware
• Proficient in mechatronics CAD design tools such as Altium, PADS, AutoCAD or similar
• Balanced skills and experiences in mechanical design, basic electrical circuitry and microcontroller programming
• Proficient in programming languages such as Python and C++, and/or other languages
• Hands on experience in commissioning of industrial robots/mobile robots/mobile manipulator
• Experience with design and development of mobile robots or mobile manipulator will be a plus
• Must be result-orientated, independent and a self-driven team player
• Strong in written and verbal communication in English

Job Responsibilities:

Project Design and Development:

• Lead the design process for civil/structural engineering aspects of deep excavation projects.
• Develop detailed geotechnical design plans, ensuring compliance with relevant codes and regulations.
• Conduct engineering analyses, including stability assessments and structural integrity evaluations.

Technical Leadership:

• Provide technical guidance and mentorship to junior engineers and design teams.
• Review and approve design calculations, drawings, and specifications.
• Troubleshoot and resolve complex design and construction issues.

Stakeholder Collaboration:

• Collaborate with multidisciplinary teams, including architects, contractors, and project managers.
• Liaise with clients, regulatory authorities, and other stakeholders to ensure project requirements and standards are met.

Quality Assurance and Compliance:

• Ensure that designs meet local regulations, safety standards, and best practices.
• Participate in audits, inspections, and peer reviews of design work.

Project Management:

• Manage timelines, budgets, and resources for design deliverables.
• Support the preparation of technical reports and documentation.

Job Requirements:

• Bachelor’s or Master’s degree in Civil/Structural Engineering or a related discipline.
• Recognized professional engineering qualifications by the Professional Engineers Board of Singapore.
• A minimum of 10 years of relevant experience in civil/structural engineering, with at least 5 years focused on designing geotechnical works for deep excavation projects.
• Proven expertise in handling projects of a similar size and complexity.
• Strong knowledge of geotechnical design principles, soil mechanics, and structural analysis.
• Proficiency in relevant design software and tools (e.g., Plaxis, AutoCAD, STAAD.Pro).
• Excellent communication, leadership, and problem-solving skills.

Preferred Qualifications:

• Chartership or equivalent professional accreditation (e.g., PE, CEng).
• Familiarity with Singapore’s construction and regulatory environment.
• Experience with risk assessment and mitigation for geotechnical designs.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

This project aims to investigate the performance of cementitious materials and 3D printed concrete against ballistic impact. The researcher will be required to cast and fabricate the various cementitious materials and 3D printed concrete, prepare the logistics and perform the relevant ballistics tests.

Job Requirements

The research fellow should have at least 3 years relevant experience in the following two areas:
• 3D concrete printing;
• Conducting laboratory ballistic tests.

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Employment Type: Full-time

About the Role:

We are seeking a skilled and proactive IT Level 2 EUCD (End-User Computing Devices) Assistant Specialist to join our dynamic IT support team. In this role, you will be guided to provide second-level technical assistance to ensure seamless operation and optimal performance of end-user computing devices and systems. Your expertise will be crucial in resolving complex technical issues and delivering exceptional service to our users.

Key Responsibilities:

• Assist in Level 2 technical support for end-user devices, including desktops, laptops, tablets, mobile devices, and peripherals.
• Troubleshoot and resolve hardware, software, and connectivity issues in a timely manner.
• Collaborate with helpdesk to escalate unresolved issues and ensure prompt resolution.
• Install, configure, and maintain end-user devices and related software applications.
• Support system upgrades, patches, and new software rollouts for end-user devices.
• Manage and update IT documentation, including FAQs and troubleshooting guides.
• Monitor and address vulnerabilities and compliance issues on end-user devices with other infrastructure teams.
• Provide excellent customer service by effectively communicating technical solutions to non-technical users.

Required Qualifications:

• Minimum 1 years of experience in IT support, specifically with end-user computing devices.
• Good technical knowledge of Windows, macOS, and mobile operating systems (iOS/Android).
• Experience with Active Directory, Office 365 and remote troubleshooting tools.
• Familiarity with endpoint security solutions and system management tools (e.g., SCCM, Intune).
• Strong problem-solving skills and ability to work independently under minimal supervision.
• Excellent communication and interpersonal skills with a customer-focused mindset.

What We Offer:

• Competitive salary and benefits package.
• A supportive and inclusive work environment.
• Exposure to cutting-edge technologies and projects.

How to Apply:

Interested candidates are encouraged to submit their resume and cover letter outlining their qualifications and experience.

Join us in delivering exceptional IT support and driving technological excellence!

Responsibility

• Responsible for high-performance block implementation (RTL to GDSII).
• Perform block level floor planning, power grid implementation, APR placement, timing optimization, CTS and routing.
• Close the design to meet timing, power budget and area targets.
• Run physical verification flows (DRC/LVS/EM/IR), and implement fixes to meet the requirements.
• Implement ECO’s to address functional bugs, timing and physical verification violations.
• Responsible for the generation and maintenance of block-level STA constraints and performing STA signoff checks.
• Responsible for timing model generation and supporting the successful integration of blocks into SOC.

Qualification

• At least 3 years of hands-on experience in digital-physical design.
• Bachelor/Master’s degree in Electrical Engineering with an emphasis in IC design
• Experience with digital Physical design and Static Timing Analysis
• Experience in floor planning and routing.
• Experience in advanced process nodes (5nm).
• Good experience with Synopsys implementation tools (DC, ICC2), and experience with Cadence (Innovus) implementation tool is a plus.
• Experience in Mentor Verification tool, Calibre.
• Proficient in TCL coding, Perl/Python knowledge is a plus.
• Good written and communication skills.

Job Description:
We are seeking a skilled Data Engineer with expertise in AWS cloud computing and database administration to join our team. In this role, you will design, implement, and manage scalable data solutions while maintaining and optimizing databases to ensure high performance and reliability..

Job Responsibilities:

• Design, deploy, maintain, and optimize database systems (Oracle, MySQL, SQL Server), including installation, configuration, backup, and recovery.
• Monitor and optimize database performance to improve response time, stability, and reliability.
• Plan and expand database capacity to ensure scalability and meet business requirements.
• Deploy and manage cloud infrastructure on AWS, including servers, networks, storage, and other resources, to provide a stable and reliable environment.
• Create, configure, and maintain AWS services to align with business needs, selecting appropriate services based on requirements.
• Implement and manage monitoring tools to track the performance and operational status of databases and AWS environments, proactively identifying and resolving potential issues.
• Collaborate with cross-functional teams to deliver efficient, scalable, and reliable cloud and database solutions.

Job Requirements:

• Bachelor’s degree or higher in Computer Science, Information Systems, or related fields.
• Minimum of 3+ years of experience in database administration (with hands-on experience in Oracle, MySQL, or SQL Server).
• Strong experience with AWS services and managing cloud infrastructure.
• In-depth knowledge of database performance tuning, troubleshooting, and optimization techniques.
• Familiarity with cloud networking concepts and using monitoring tools for AWS environments.
• Strong communication and problem-solving skills to handle technical challenges effectively.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are seeking a highly motivated Research Engineer to join our team, specializing in the hands-on experimentation and characterization of materials. The successful candidate will work closely with the research team to conduct materials characterization, perform electrochemical testing, and contribute to the development of innovative solutions for lithium battery recycling. This role requires a candidate with hands-on experience in material science techniques and electrochemical methods.
Key Responsibilities:

1. Perform experiments and characterization of materials using analytical techniques such as ICP, XRD, and FTIR.
2. Conduct electrochemical analysis, including cyclic voltammetry, LSV and other related techniques.
3. Prepare samples for testing and ensure proper calibration and maintenance of equipment.
4. Analyze and interpret experimental data, providing clear and concise reports to the research team.
5. Collaborate with cross-functional teams to ensure experimental objectives are achieved.
6. Maintain accurate records of experiments and uphold laboratory safety protocols.
7. Assist in troubleshooting and optimizing experimental procedures as needed.
8. Assist in lab procurement activities.

Qualifications

1. Bachelor’s or Master’s degree in Materials Science and Engineering, Chemical Engineering, or a related field.
2. Hands-on experience with material characterization techniques such as ICP, XRD, SEM and FTIR.
3. Proficiency in electrochemical methods is highly preferred.
4. Strong analytical and problem-solving skills with attention to detail.
5. Effective communication skills, both written and verbal, to document and present findings.
6. Ability to work independently as well as collaboratively within a team.
7. Knowledge of laboratory safety protocols and best practices.
8. Experience in data analysis and interpretation software (e.g., Origin).
9. Familiarity with additional characterization techniques is an added advantage.
10. Prior experience in an R&D or industrial laboratory setting.

Job Responsibilities:

• Design and commissioning of building electrical systems including, fire alarm, EVCS, power distribution, lighting, lightning protection etc.
• Perform Lighting Power Budget calculations.
• Understand and design Single Line Diagram and perform electrical load calculations.
• Understand and familiarize with Singapore authority requirements and adherence to Singapore building code of practices.
• Involve with project site meetings to understand client requirements and site supervision.
• Participate in Testing & Commissioning phase of completed electrical installations.

Experienced Electrical Engineer with minimum 5 years of relevant experience is welcomed to apply.

Requirements:

• An electrical engineering degree recognised by the PEB of Singapore.
• Familiar with statutory code and requirements.
• Minimum 5 years of work experience as a Electrical design Consultant in an M&E consultancy firm.