Job Duties:

• Design civil and structural elements such as drainage, retaining walls, earthworks, slope formation, sewer etc
• Prepare and compile design and calculations for authorities submission
• Prepare Autocad drawings
• Hybrid work from home and office when required

Requirements:

• Proficient with design software such as Staad, Plaxis, Prokon
• Proficient with Autocad
• Minimum 5 years experience
• Bachelor degree from PEB Accredited University
• Candidates with either structural or civil design experience may apply
• BIM Knowledge will be advantage

As a Service Engineer, you have to :

• Attend to equipment fault at customers’ premises.
• Liaise with the customer and sub-contractors regarding all aspect on the add-on project activities.
• Monitor the progress of the work done closely in order to ensure that the schedule and quality of work are met.
• Ensure that all materials and equipment are delivered on time as per schedule for site installation or rectification of fault.
• To carry out periodic maintenance for our customers.

You should :

• Possess a Diploma in Electronics and/or Electrical Engineering.
• 2-3 years’ hands-on experience in troubleshooting of card access systems, alarm systems, CCTV, etc.
• With good interpersonal communication skills.
• Have a valid Class 3 license.
• Be ready for rotating stand-by duty.

Responsibilities

• Attend to all customer calls.
• Performing thorough equipment inspections, calibration, adjustment & test/repair of equipment
• Scheduling appointments for test equipment due for calibration
• Ensuring laboratory equipment is calibrated as per specifications and standards
• Addressing and troubleshooting any test equipment failures and repairing of test equipment
• Maintaining and updating a record of all documentations of the calibration process
• Administering and monitoring effectiveness of calibration procedures
• Ensuring completion of tasks as per assigned deadlines.

Requirements

• Minimum Education Level: NITEC/ Diploma in Electrical/Electronic Engineering or its equivalent
• Minimum 3 years proven work experience as a calibration technician or similar role
• Knowledge in ISO 7025 standard will be an advantage
• Strong analytical and troubleshooting skills
• Hardworking, meticulous, team player and able to work independently
• Proficency in Microsoft Office is essential

• Work with Project Manager to manage project related tasks to achieve the project objectives on time and within the cost target by strictly enforcing quality, safety, and customer satisfaction throughout the entire duration of the project.
• Ensure performance targets are achieved.
• Provide regular site progress update status to project manager.
• Ensure compliance to Schindler Organizational Norms, policies, procedures and requirements of the process and quality hold points defined in the work instructions of the Top Range Excellence / Fulfilment Plus process.
• Ensure product line-based installation checklists are progressively checked, signed and filed
• Conduct toolbox meeting minimum 2 times / month
• Monitor and review overall installation and T & C timeline and preparation of catch-up proposal, if applicable.
• Conduct weekly site progress meeting with subcontractors, monitor and supervise to ensure the subcontractors comply to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Drawing team.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works and Drawing Department.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.
• Adherence to safety practices in the workplace.

Optics Engineer

We are looking for an experienced Optics Engineer to be part of our R&D team. In this role, you will focus on the design, development, and optimization of manufacturing processes for optical components and systems. The ideal candidate will bring at least 2 years of experience in optics engineering, with a strong background in manufacturing processes and quality assurance, ensuring the production of high-precision optical products.

Key Responsibilities:

Process Design and Improvement:

• Develop and refine manufacturing processes for optical components such as lenses, mirrors, prisms, and coatings.
• Enhance fabrication techniques, including grinding, polishing, coating, and assembly, to boost efficiency and precision.

Production Support:

• Collaborate with production teams to address and resolve manufacturing challenges.
• Ensure production processes meet all required quality standards and performance specifications.

Equipment and Technology Management:

• Identify, acquire, and maintain essential manufacturing equipment for optical production.
• Implement advanced technologies, including automated systems and CNC machinery, to improve production capabilities.

Collaboration with Design Teams:

• Partner with optical design teams to ensure new products are manufacturable.
• Provide design feedback to optimize production processes and outcomes.

Documentation and Reporting:

• Create and maintain comprehensive process documentation, technical reports, and work instructions.
• Analyze production data and generate reports on key performance metrics.

Continuous Process Improvement:

• Drive initiatives to improve product yield, reduce costs, and enhance cycle times.
• Stay current on the latest advancements in optical manufacturing and integrate new techniques to improve the production process.

Technical Documentation and Standards:

• Take responsibility for creating, reviewing, and maintaining technical drawings, as well as managing part number creation and maintenance.
• This role aligns closely with product engineering tasks but focuses on quality assurance to uphold the company's production standards.

Job Summary:

We are seeking an experienced Facilities Engineer to manage and optimize our building systems, infrastructure, and assets. The ideal candidate will oversee maintenance operations, ensure regulatory compliance, and implement strategies for efficient and sustainable facility management.

Key Responsibilities:

Asset Management:

• Maintain and update asset records in the asset management system
• Conduct regular criticality and condition assessments
• Develop and implement maintenance strategies
• Produce annual and yearly asset capital replacement plans

Maintenance Operations:

• Oversee planned, preventive, and reactive maintenance for all facility assets
• Manage statutory inspections and testing
• Coordinate specialist engineering and handyman services
• Ensure compliance with health, safety, and environmental regulations

Technical Administration:

• Manage records, O&M manuals, and technical documentation
• Operate building management systems
• Oversee work order management and performance monitoring
• Maintain technical library and manage subcontractors

Infrastructure Management:

• Maintain site infrastructure including HVAC, electrical, plumbing, and security systems
• Oversee building fabric maintenance and site infrastructure upkeep
• Manage specialized systems (e.g., lifts, fire systems, water management)

Project Management:

• Initiate and manage capital projects and improvements
• Coordinate with contractors and vendors for installations and upgrades
• Manage project budgets and timelines

Compliance and Safety:

• Ensure adherence to all relevant regulations and policies
• Manage permits, licenses, and certifications
• Conduct risk assessments and implement safety measures

Reporting and Analysis:

• Prepare regular reports on asset performance and condition
• Analyze maintenance data to identify trends and improvement opportunities
• Provide recommendations for cost savings and efficiency enhancements

Requirements

• Bachelor's degree in Mechanical, Electrical, or Civil Engineering
• 3 years of experience in facilities management or building engineering
• Strong knowledge of building systems and asset management principles
• Familiarity with CMMS and building automation systems
• Experience with project management and budget control
• Understanding of relevant regulations and industry standards (e.g., ISO 55000)
• Excellent problem-solving and leadership skills
• Relevant certifications (e.g., PE, CEM, FMP) are a plus

The ideal candidate will be a hands-on leader with strong technical expertise, capable of managing complex facility operations while driving continuous improvement and efficiency.

About EDHECinfra

EDHECinfra is a provider of market indices, benchmarks and valuation analytics for investors in unlisted infrastructure equity and private debt. EDHECinfra maintains the infraMetrics® platform: an online information system that gives access to key market indices including the infra300® and infra100® series. InfraMetrics® also includes a wealth of valuation data and analytics, risk metrics, a fund strategy analysis tool providing robust performance quartiles for any segment, strategy or vintage, and peer group analyses allowing investors to compare themselves against comparable segments of the market.

Role
Great opportunity to join a growing and global team that is bringing new and high-quality data and rating services to investors, focusing on the estimation of climate risks’ financial materiality. Climate physical and transition risks will be taking an increasing part of investors’ portfolios and corporates’ balance sheets in the near future, creating a need for assessing and pricing them.

We are looking for a full-stack developer skilled in React.js, JavaScript, and TypeScript for front-end development, as well as Python for back-end development.

The role involves taking over a climate rating website, improving its existing features, and developing new functionality and contributing to its aesthetic and user experience (UX). You will be responsible for ensuring that the platform remains efficient, secure, and aligned with modern standards. Collaboration with teams to gather requirements and troubleshoot issues is essential.

Responsibilities

· Develop and maintain front-end components using TypeScript, JavaScript, and React.js.

· Develop APIs for CRUD operations on a MongoDB database, using Python with FastAPI.

· Write clean, efficient, and testable code using automated testing frameworks such as Jest and Cypress.

· Work closely with DevOps for application deployment and maintenance on AWS cloud infrastructure.

· Collaborate with cross-functional teams to define, design, and implement new features.

· Troubleshoot and resolve production issues across the full stack to ensure optimal performance and reliability.

Requirements

· 5+ years of professional coding experience.

· Degree in Computer Science or Engineering preferred.

· Comprehensive understanding of React.js and its core principles.

· Proficiency in JavaScript (preferably TypeScript).

· Experience with Python and FastAPI.

· Experience with Wordpress would be advantageous.

· Ability to create basic mockups using tools such as Figma would be a plus.

· Ability to adapt and perform multiple roles.

· Strong work ethic and self-management skills.

· Ability to work independently with minimal supervision.

To apply for this offer, please send a CV and a cover letter to: [email protected]

To know more about EDHECinfra: https://edhec.infrastructure.institute/mission

Job description:

• Provide support to their supervisors throughout the design and development phase.
• Manage day-to-day on a construction site and the main source of technical advice and quality control
• Site supervision, establishment of daily reporting, planning and scheduling of daily activities, coordinate with stakeholders and subcontractors, etc.
• Will be responsible for overall project management and delivery of the project including planning, scheduling and execution
• Make calculations and prepare plans for projects, and oversee and provide reports on progress and issues that arise during the project lifecycle
• Checking drawings and quantities and ensuring the accuracy of calculations
• Oversee the progress of project elements
• Attends project meetings, liaise with clients/ consultants/ technical teams, and resolve any site issues
• Assists in risk assessment, recommendations on risk control measures
• Ensure site safety & compliance to authorities’ requirements
• Make periodic site visits to monitor progress and ensure that projects are completed according to specifications and construction codes
• Provide budget oversight and develop cost estimates for materials and personnel based on documents and project plans
• Throughout the planning and construction processes, provide support in ways that can include gathering data for permit applications, presenting documentation or blueprints to clients, and maintaining records of change orders
• Manage project stakeholders, clients, design team, site team and other relevant parties
• Need to draw using AutoCAD if any design urgent works
• Assist in all other duties assigned by your superiors.

Requirement:

• Degree in Civil Engineer or its equivalent, recognized by PEB or IES of Singapore
• Proficient in both MS Office, Microsoft Project and AutoCAD
• Good exposure in design of Civil Engineering works
• * Preferably with Pipeline experience.

Responsibilities:

• Good technical and project management abilities.
• Strong ability to develop, plan and organize resources efficiently.
• Communicating plans and challenges and options in engineering issues and solutions to various stakeholders and Clients alike.
• Inspiring a team of different nationalities and cultures.
• Professional integrity and exemplary conduct at all times.
• Proven problem-solving and achievements.
• Comfortable at work site conditions.
• Site supervision and able to co-ordinate well with sub-contractors, RE and RTO.

Requirements:

• At least 3 year(s) of relevant working experience in construction is required for this position.
• Candidate must possess at least a Degree in Engineering (Civil/Structural) or equivalent.
• Preferably Managers specializing in Engineering - Civil/Construction/Structural or equivalent.
• Knowledge in Microsoft project.
• Full-Time positions available.

Applicants are to email to [email protected]

JOB DESCRIPTION:

•

Review drawings and scope of works, resolve technical issues with clients and subcontractors.

•

Monitor overall site progress, schedule critical work paths to avoid delay in project schedule.

•

Ensure specifications are being followed and work is proceeding on schedule.

•

Plan work activities and ensure they are carried out in safe working environment.

•

Manage and supervise site workforce.

•

Prepare and submit weekly/ monthly progress/construction report.

Job Requirements:

•

Minimum 1-year relevant experience in building construction environment.

•

Basic knowledge in construction planning.

•

Proficient in MS Office and schedule reporting.

•

Ability to work independently and within a team.

Join the Team at McConnell Dowell Are you passionate about engineering and civil infrastructure? At McConnell Dowell, we deliver landmark projects that shape communities and drive progress.

We're seeking Project Engineers and Site Engineers to join our team in Singapore and contribute to our civil infrastructure works projects.

About the Role

As a Project Engineer or Site Engineer, you'll play a pivotal role in ensuring the successful execution of our projects. Your responsibilities will include:

• Overseeing engineering, planning, quality, cost control, and scheduling functions.
• Adhering to the McConnell Dowell Project Execution Plan and safety/environmental responsibilities.
• Assisting senior engineers and the construction manager in daily site activities.
• Monitoring and reporting on site progress, including direct employee and subcontractor works.
• Developing procedures for construction activities and ensuring compliance with relevant legislation.
• Representing McConnell Dowell professionally in interactions with clients and stakeholders.
• Promoting McConnell Dowell’s core values and fostering a strong safety culture.

What We’re Looking For

To excel in this role, you should have:

• A degree in Civil or Structural Engineering. 3 to 5 years of relevant on-site civil construction experience.
• Preferably, local experience and knowledge of civil infrastructure projects in Singapore.
• Strong interpersonal and communication skills.
• The ability to work on an alternate 6-day workweek schedule.

Why Join McConnell Dowell? Be part of a dynamic team working on major civil infrastructure projects. Gain valuable experience with a globally recognized infrastructure company. Contribute to innovative and impactful engineering solutions.

How to Apply If you're ready to take your engineering career to the next level, we want to hear from you! Submit your application today and join McConnell Dowell in building a better future.

Roles & Responsibilities

Job Description:

• Handle project planning, scheduling, monitoring and updating to meet project completion targets
• Perform site planning, coordination and inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met
• Liaise with the BIM team to update the drawings or BIM Model with the latest information available timely
• Prepare as-built drawings or BIM Model and compile O&M Manual for submission
• To assist in project coordination and oversee of all Civil and Structural works on site and ensure all related activities are carried out as per drawings
• Review architectural & structural submission documents & submission drawings prior relevant authorities' submission
• Assist the Project team in site walk-down survey with other discipline engineers and Client representatives as required, in resolving technical issues until construction completion
• Liaise with internal and external parties for project management
• Any ad-hoc duties as assigned

Job Requirements:

• Minimum of 2 years’ experience
• Recognized Degree in Civil Engineering, Project Management, Structural Engineering or equivalent approved by PEB, BOA or SISV
• Good knowledge of technical design and engineering, construction methodology and construction planning
• Good oral, written and inter-personal communications skills in dealing with individuals and groups at all levels
• Proficient in Microsoft Office, AutoCAD and knowledge of BIM
• Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment
• Obtain CONQUAS supervisor certificate will be added advantage

Job Description

• Monitor and review master construction program and preparation of catch-up program, if applicable.
• Monitor and supervise Engineers / foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Technical team.
• Preparation of detailed method statements and work instructions for construction.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works and Technical Department.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.
• Involve in tendering of projects, able to do measurement and cost estimation for tender & quotation.

You are responsible for the day to day management of our custom-build job shop fabrication environment, to maximize productivity and cost-savings. This will require you to plan, implement and monitor work schedules and supervise the production process with various parties. You will also need to evaluate and resolve any production-related discrepancies and problems, as well as ensure meeting all permits required by regulatory authorities.

Responsibilities

• Work with the production team to innovate and improve existing fabrication processes.
• Develop and implement quality control measures to repeatedly deliver desired results.
• Oversee the maintenance of factory and equipment for maximum safety and efficiency.
• Adhere to statutory requirements and company enforced rules and regulations
• Coordinate with project personnel to receive/clarify customers’ requirements.
• Apply problem solving skills and work with production supervisors, draftsmen to derive fabrication solutions upon receipt of design drawings.
• Value engineer solutions to optimize cost savings.
• Plan production processes and allocate/deconflict resources for scheduling delivery.
• Track production output, cost and progress to ensure quality, budget and delivery targets are met.
• Coordinate and work with specialist vendors to ensure quality and project requirements are met.
• Lead, organize or participate in daily discussions to ensure smooth production operations.

Requirements

• Minimum Diploma or Bachelor degree in Engineering;
• At least 2+ years proven experience in production/industrial engineering; managerial experience a plus
• Familiarity with CAD software
• Proficiency using Microsoft Office
• Possess a wide breadth of knowledge in Engineering & materials know-how
• Excellent communication skills
• Ability to maintain positive vendor and client relationships
• Strong coordination skills, organized and an energetic people-person with an eye for details
• Self-driven, results-oriented, thorough and is able to work well under pressure
• Strong leadership, communication and interpersonal skills
• Strong analytical and problem-solving skills

Job Summary

We are seeking a passionate and experienced C# Engineer who thrives in dynamic environments and is eager to make a meaningful impact.

Mandatory Skill-set

• Degree in Information Technology, Computer Engineering, and/or Computer Science;
• Minimum 3+ years of professional experience in C#, .NET Development;
• Proficiency in WPF and ASP.NET for presentation frameworks;
• Strong understanding of relational database concepts;
• Hands-on experience with MS SQL;
• Proficient in Git with solid grasp of Git workflows;
• Experience in Agile Scrum teams; familiarity with Jira and Confluence;
• Good communication and presentation skills.

Desired Skill-set

• Experience working with tools such as Jenkins and Octopus;
• Experience working with ReactJS is preferred.

Responsibilities

• Engage in the software development, maintenance, and support of custom-built applications to enhance functionality and performance;
• Prepare comprehensive technical documentation utilizing Jira and Confluence to facilitate effective communication among team members and stakeholders;
• Conduct unit testing on software deliverables, and assist in product, integration, and user acceptance testing to ensure high-quality outcomes;
• Provide post-implementation support by investigating and troubleshooting issues to guarantee uninterrupted operation of applications;
• Undertake any additional ad-hoc responsibilities as assigned to support team objectives and project needs.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interview.

Employment Type: 6-12 months contract with the potential for permanent conversion

Job Responsibilities:

• Lead the setup and commissioning of test processes and machinery for new devices, ensuring equipment is fully operational and meets testing requirements.
• Optimize and maintain testing machines during the engineering phase to ensure efficient and accurate test execution.
• Analyze test results and perform post-build activities such as failure analysis and corrective actions (FACA) to address yield loss and improve processes.
• Collaborate with external vendors and internal teams to develop and deliver testing solutions for new optical modules during the engineering phase, particularly for small-scale production.
• Provide technical support in the development and refinement of test procedures, continuously improving testing methodologies and equipment.
• Ensure regular maintenance, calibration, and repair schedules are followed to maintain high performance and minimal downtime of test equipment.
• Generate clear and concise reports on test results, findings, and recommendations for process improvement.

Job Requirements:

• 3+ years of experience in a Test Engineer role or a similar position, with a focus on optical modules or related technologies.
• Bachelor’s or Master’s degree in Engineering, Physics, Materials Science, or a related field.
• Hands-on experience in functionality testing of optical devices, such as cameras, projectors, range finders, flashlights, and proximity sensors.
• Proven ability to operate, maintain, and troubleshoot test machines, with experience in tooling and configuring machines for new device testing.
• Familiarity with automated test equipment (ATE) and test software, including the ability to develop and refine testing processes.
• Proficiency in analyzing test data, conducting failure analysis, and applying corrective actions to improve yield and product quality.
• Strong understanding of statistical analysis tools and techniques for data interpretation.
• Knowledge of FMEA (Failure Modes and Effects Analysis) and root cause analysis methodologies.
• Excellent written and verbal communication skills, with the ability to work effectively with cross-functional teams.

Job Duties:

• Provide technical and engineering leadership, and supports the development of new technologies within a local laboratory
• Be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Have the ability to oversee standard and/or routine technical problem solving activities and interact with customers on technical issues and questions
• Assist in the professional development of novice technicians and engineers within the local laboratory and works on well delineated technical issues including standard and routine analysis
• Carry out crucial examination and implementation of testing concepts and data and able to utilize an assortment of skill, methods, procedures and materials in advanced testing analysis
• Has a clearly demonstrated ability to apply an array of testing techniques in a rational and practical style to help examine issues and build solutions.

Job Requirements:

• Possess a minimum Bachelor Degree of Science or Engineering major and 2 years of relevant working experience in a testing related field
• Possess a high level of expertise related to scope, core theories, concepts, terminologies and boundaries of chosen engineering discipline
• Possesses a demonstrated ability to apply academic knowledge within the context of Element’s business
• In-depth understanding of testing concepts and compiles testing data from the tests performed

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Responsibilities

• Develop technical designs of roadworks and highways, traffic diversion schemes and delivery models according to different standards and requirements.
• Planning and supervising projects.
• Responsible for temporary traffic diversion scheme to suit construction progress.
• Coordination with relevant authorities for purpose of obtaining information and approvals.
• Preparation of Traffic Management Plan (TMP) for construction project.
• Preparation of tender documents and proposals.
• Preparation of Traffic Management Plan for road widening and viaduct construction project.
• Stakeholder management & liaising with different authorities.

Requirements

• Preferably with a Degree in Traffic Engineering and above or equivalent.
• Min 10 years experience in construction industry .
• Able to work as a team, assertive, independent, and proactive.

1. Manage the team of RTOs, supervision of site set up, earth works, drainage works and reinstatement works

2. Report to Qualified Person

3. Prepare weekly reports and monthly reports.

4. Attend the meeting with client and consultants

5. Report any non-compliances to Qualified Person

6. Ensure the site Safety

The information included in a network engineer job description usually contains a list of specific duties and responsibilities and mentions the required qualifications and skills for the role. Employers typically post their preferences and requirements in the job description to help attract matching and suitable candidates. This incentivises candidates to prepare their applications accordingly to showcase their potential fit, which can result in a more efficient hiring process. The job description may also indicate details about the work environment such as the nature of the business and the type of data you can work with.Depending on the employer's requirements, network engineers may be stationed at an office or travel to work sites to provide support when necessary. A network engineer typically designs, installs, configures and maintains computer networks. They also troubleshoot any issues and ensure that the network is secure and efficient. Network engineers frequently collaborate with other information technology (IT) team members to develop network policies and stay up-to-date with emerging technologies to ensure the network remains secure and scalable.

Our client is a manufacturer that designs, builds and markets its semiconductor manufacturing equipment used in the production of integrated circuits. They are currently hiring for a Process Engineer and will like to invite suitable candidates to send your detailed resume to [email protected]

Process Engineer

Responsibilities:

• Define and Document Equipment process requirement and specification.
• Perform Process characterization to optimize critical process paths in order to meet equipment specification.
• Review, simplify and optimize Internal Buy Off specification for equipment together with Quality Assurance Department.
• Participate in continuous process improvement activities to enhance Equipment capability.
• Support Equipment manufacturing activities by helping to trouble-shoot and resolve process-related issues
• Support other internal departments to handle customers’ process related issues and recommend technical solutions
• Perform data analysis using statistical techniques and conduct process capability studies
• Transfer process knowledge to in house Engineers and Technicians to ensure optimal equipment performance.
• Equipment UPH projection calculation base on specific process parameter.

Requirements:

• Degree in Production / Mechanical / Material Science Engineering
• At least 3 years experience in an equipment manufacturing environment with a process engineering and background
• Strong interest in the development of new manufacturing processes
• Experience in process design and control in the area of laser marking process.
• Knowledge in Material Science will be added advantage.
• Knowledge in cycle time calculation.
• Trained in SPC, DOE and other statistical tools

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• Coordinate the contractor, AC, QP(D), and relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structures, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review the Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for the presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

TLG Technology is a leading provider of cutting-edge technology in nanofabrication equipment, semiconductor wafer processing and testing equipment, metrology, and alternative source solutions for the semiconductor wafer and electronics industries.

We invite you to join our dynamic team with the following career opportunity:

Responsibilities:

You will be responsible for providing service support for a range of semiconductor wafer processing equipment, including Automatic Wet Benches, Metrology, Spin Rinser/IPA Dryers, and laboratory equipment/instruments.

Requirements:

• Relevant experience and strong skills in mechatronics or electrical troubleshooting will be an advantage.

• A Technical Education, Diploma, or Degree in any engineering discipline.

• Ability to work independently and collaboratively as part of a team.

• Hardworking attitude, willingness to learn, good character, and a commitment to working with our growing company for at least three years or more.

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Design and build data pipelines infrastructure to collect, process and store data from various sources.
• Develop data assets platform to provide a centralized repository for managing and accessing data assets.
• Implement automated SQL queries based on user-defined criteria or business requirements.
• Use techniques like query templates, metadata-driven generation, or machine learning algorithms to generate SQL queries.
• Create new IPs in Singapore in area of expertise.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new technology development.

Requirements:

• Degree / Masters / PhD in Computer Science, Data Science, Statistics Applied Sciences or related field.
• Proficiency in Python, SQL, Java or Scala programming languages.
• Understand data warehousing concepts, ETL (Extract, Transform, Load) processes and tools like Informatica, Talend, or Airflow.
• Knowledge of relational databases (MySQL, PostgreSQL, Oracle) and NoSQL databases (MongoDB, Cassandra).
• Familiar with Apache Airflow, Kubernetes or Ansible for automating data pipelines and infrastructure.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

1. Undertake project management and product design works.

2. Provides customer support from product development to realisation.

3. Support cost study on machining and project works.

4. Handle all jigs and fixtures development works on machining jobs.

5. Represent company when dealing with subcontractors relating to hardware support.

6. Ensure safe operations and handling at all times