• Responsible for the design, implementation and monitoring of all electrical related works at site
• Detailed design of all Electrical related works
• Interpret tender drawings and studies the contract documents and applicable standards or specifications prior to design of the Electrical works
• Manage directly and provide engineering and technical supports to all the electrical work groups at site
• Coordinates with Client / Consultant’s representatives for any site instructions and inspection of works
• Support the Construction Manager in accomplishing all the goals and targets for the electrical groups at site
• Ensure that all the works done are in accordance with the approved construction drawings, contract documents, project specifications, and all applicable standards whether local, national or international standards
• Ensure that all site works are done according to all applicable quality standards
• Directly responsible for the safety of all electrical group personnel of the project by ensuring that the project execution will be done according to all applicable health, safety, sanitary and environmental standards.

Technical

• Design, integration & coordination, installation & commissioning of mechanical systems and services required for the project
• Liaise with Construction/Installation Manager to ensure job is on schedule on Site.
• Liaise with Client on all technical aspects of the project.
• Provides engineering advice for the Construction/Installation Team.
• Attend meetings with client on all disciplines of the work (i.e. 1 etc.) as required.
• Prepares with the Quality Manager all Inspection and Test Plans and associated Project Specific Procedures.
• Ensure that the quality requirements of the client are adhered to and that company procedures are followed.
• Coordination & integration of the design with other engineering design disciplines & services
• Ensure project timetabling requirements are met
• Development / production of inspection & test and operating & maintenance manual documentation.
• Ensure local regulatory and OHS requirements are maintained
• Ensure that the surveys of installations throughout the project are conducted in a professional manner with all results being reviewed and accepted by UGL. All actions resulting from these surveys are coordinated by the Engineer until completion.
• Provide written reports on engineering activities as required by the Project Manager.
• Mentor Engineering Graduates and Engineering Vacation Students (Engineering Assistant)
• Maintain documentation and registers
• Provide monthly reporting data to the Engineering Manager as required

QUALIFICATIONS, SKILLS & EXPERIENCE REQUIRED

• Minimum 5 years’ experience as an Electrical Engineer within a similar industry.
• Degree in Electrical Engineering with more than 5 years’ experience in basic design requirements, fabrication, installation, T&C and all site activities related to all electrical works.
• Familiar with all electrical engineering methodologies as well as the corresponding equipment, materials, consumables and tool allocations related to electrical works.
• Ability to work as part of a close-knit management team and manage numerous activities / projects simultaneously – both short and long term.
• Ability to work on own initiative and with the minimum of supervision
• Outgoing personality essential for dealing directly with Clients and their design team
• Demonstrated ability to work independently to organize and prioritize demands, handlemultiple complex tasks simultaneously, set and meet deadlines and follow-through within a fast-paced environment with multiple and competing demand

Key Responsibilities:

• Assist in the planning, execution, and monitoring of civil engineering projects to ensure they are completed on time and within budget.
• Supervise construction activities on-site, ensuring compliance with technical specifications, safety regulations, and quality standards.
• Liaise with project managers, clients, subcontractors, and authorities to ensure effective communication and project alignment.
• Conduct regular site inspections to monitor progress, quality of work, and adherence to safety protocols.
• Review technical drawings and designs for accuracy and ensure they are implemented correctly on-site.
• Prepare progress reports and documentation for management and stakeholders.
• Identify potential issues or risks during project execution and develop appropriate mitigation strategies.

Qualifications:

• Education: Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board (PEB) or Building Construction Authority (BCA).
• Experience: Minimum of 10 years of relevant local experience in civil engineering projects, specifically in infrastructure, sewer & drainage, and roadworks.
• Certifications: Possession of Resident Engineer (RE) or Resident Technical Officer (RTO) certification is preferred.
• Project Exposure: Experience working on LTA or PUB projects is highly desirable.

Skills:

• Strong technical knowledge of civil engineering principles and practices.
• Excellent leadership and team collaboration skills.
• Proficient in project management software, AutoCAD, MS Office, and MS Project.
• Ability to work independently with minimal supervision while meeting tight deadlines.
• Strong problem-solving skills and attention to detail.

Benefits:

• Competitive salary package commensurate with experience.
• Opportunities for professional development and career advancement.

Please submit your updated resume in MS Word format by clicking the QUICK APPLY button.

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Larry Loh Yi Song
Registration Number: R23115969
AlwaysHired Pte Ltd
EA Licence No: 24C2293

Scope:

• Identify and develop new business opportunities by prospecting and networking with potential customers.
• Build and maintain strong relationships with existing clients to secure repeat business and identify upselling opportunities.
• Meet or exceed sales targets and contribute to the overall growth of the business.
• Provide in-depth technical consultations to customers to understand their requirements for pneumatic systems, motion control, and fluid handling.
• Recommend and design customized solutions based on client needs, utilizing company products and capabilities.
• Conduct product demonstrations and technical presentations to highlight product benefits and ROI.
• Monitor industry trends, competitor activities, and market conditions to identify opportunities and adapt strategies.
• Prepare accurate and competitive technical proposals, quotations, and tenders for customers.
• Act as the primary point of contact for customers during and after the sales process, ensuring seamless communication and support.
• Resolve customer concerns and ensure long-term client satisfaction.

Qualifications:

• Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Mechatronics, or a related field.
• Minimum 5–7 years of experience in technical sales or business development within the industrial automation or fluid control sector.
• Proven track record of achieving and exceeding sales targets.
• Proficiency in CRM tools, sales reporting, and MS Office applications.
• Problem-solving skills with the ability to handle complex technical discussions with customers.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

• Degree holder with about 8 years’ experience
• experience in design and implementation.
• Able to multi-task and work in a fast paced environment
• Possess initiative, drive and ability to work independently
• Good interpersonal/communicational skills
• Experience as a consulting in the construction industry is a pre-requisite

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, please click to apply. joey.teo(a)bayesrecruitment.com

Bayes Recruitment Pte Ltd

16 Collyer Quay, Singapore 049318

bayesrecruitment.com

EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking an experienced Senior Supplier Quality Engineer (SQE) to lead quality and process optimization efforts across our supplier network, with a strong focus on mechanical processes (e.g., metal stamping, forging, brazing, die casting, CNC machining, and milling). The successful candidate will work within the electronics and computing sectors, particularly focusing on thermal cooling solutions, ensuring that our suppliers meet rigorous quality standards and process reliability. You will collaborate closely with suppliers to enhance product quality, optimize processes, and drive continuous improvement.

Key Responsibilities:

• Develop and implement systems to monitor and assess supplier quality. Ensure that materials and components, particularly those related to mechanical processes (e.g., metalworking, tooling, fixture and jig design), comply with specified standards. Address and resolve any non-conformance issues.
• Work closely with suppliers to optimize their manufacturing processes, such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive improvements in process yield and consistency to ensure the high quality of materials and components.
• Lead the resolution of abnormal quality issues in collaboration with suppliers, focusing on root cause analysis and the implementation of corrective and preventive actions.
• Perform detailed audits to evaluate suppliers' quality management systems and process capabilities, particularly in mechanical and metalworking processes. Ensure adherence to relevant industry standards, and drive improvement actions based on audit findings.
• Work in partnership with suppliers to develop and enhance their quality processes and manufacturing practices. Ensure that their systems align with company standards, especially in the areas of tooling design and fixture/jig manufacturing.
• Collaborate with internal teams (design, production, procurement) to ensure clear communication of quality expectations and standards.
• Promote a culture of continuous improvement within the supplier network, focusing on enhancing quality management systems and manufacturing practices for metal-based components and mechanical parts.

Requirements:

• Bachelor’s degree in Engineering, Quality Assurance, or a related field.
• Minimum 5-7 years of relevant experience in supplier quality engineering or a similar role within the manufacturing or electronics industry.
• Proven experience with mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling.
• Strong understanding of supplier quality management systems and industry standards.
• In-depth knowledge of metalworking, tooling design, and the manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and negotiation skills.
• Experience with supplier audits, corrective actions, and continuous improvement processes.
• Six Sigma certification (or similar qualifications) is advantageous.
• Willingness to travel and based in China and Vietnam at least 10 months per year. (separate living arrangements provided, includes four round-trip tickets to Singapore annually)

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for at least 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

Our client provides the machinery, tools and technology in getting the best end glass quality.

• Manage all maintenance related problems on site, troubleshoot and provide technical support to customers.
• Responsible for site acceptance tests, commissioning and start-up assistance.
• Handle the customers on after sales service, understand and help customers define their needs.
• Perform trainings to enable users in optimizing the product performance.

Requirements:

• Diploma in Electrical/Mechanical/Mechatronic Engineering or equivalent
• At least 2 years of relevant working experience in servicing machineries.
• Independent with good time management skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client is the largest maritime safety company globally, setting the standard for innovation in design and engineering.

• Establish, maintain, and improve the Quality Management System (QMS) to meet regulatory and Class Approval requirements.
• Lead quality initiatives and promote a quality culture across the company, ensuring continuous performance improvement.
• Coordinate and conduct audits, report outcomes, and ensure corrective actions are implemented effectively.
• Support teams in conducting root cause analysis and incident investigations, and compile reports in accordance with regulatory standards.
• Train employees on QMS processes and ensure clear communication of quality procedures and responsibilities.
• Manage budgets for QMS projects, oversee licensing, and document quality approvals and procedures across allocated sites.

Requirements:

• Bachelor’s Degree in Engineering with ISO 9001: 2015 certification.
• At least of 5 years of experience in Quality Assurance and management in the aviation or marine industries.
• Completion of the CAAS M10/L11/L12 Examination and ability to interpret CMM, including Illustrated Part Listings (IPL).
• Experience collaborating with OEMs for capability expansion and familiarity with Lean, Kaizen, and 5S methodologies.
• Knowledge of relevant quality standards and regulations in the marine, defence, and aviation sectors, along with practical experience in Quality Management Systems.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

• Provide pre-sales technical support to propose cost competitive system design solution based on tender spec & customer requirement
• Design solutions for Access Control, CCTV, Public Address, Emergency Voice Communication, Fire Alarm, Integrated Security Management and other necessary system as deemed required by the prospective customer / project (90 %)
• Foundational understanding of IT and Network systems will be necessary in design and technical assessments.
• Knowledge of Cyber-security issues and solutions will be an advantage.
• Review technical specification, system schematic, floor-plan drawings documents
• Provide system proposal and design that meet requirements & be cost competitive
• Manage the technical Compliance Appraisal, prepare Bill of Quantities and system write-up for the designed systems
• Manage Installation Work Appraisal (Scope of Work for installation)
• Prepare technical document submissions & product sourcing
• Support technical meeting with customers, end-users, consultants & vendors etc
• Demonstrate systems / products performance to clients and staffs
• Collaborate with sales, purchase & admin teams to meet tender submission date in time
• Product evaluation & POC support on potential system
• Report various system job request status with respect to milestone schedule to Section Head and all technical problem hindering system design progress

Netpoleon Solutions is a well-established IT Network Security solutions provider and the Asia arm subsidiary of Macnica Inc – a Global Company with trillion-yen revenue.

Netpoleon Solutions has offices in Singapore, Malaysia, Indonesia, Philippines, Thailand, Vietnam, Myanmar, India, Australia and New Zealand, with its parent Company based in Japan.

We are now inviting individuals to join the Singapore office. Candidate applying should have a strong analytical mind and possess excellent cybersecurity skills and knowledge. If you have these qualities, you will embark on an exciting career together with us to pursue our strategic expansion.

Job Responsibilities:

• Deploy and provide professional services: This includes, but is not limited to, the implementation and upgrading of Cybersecurity products that Netpoleon distributes. Occasionally, this will involve managing customers and timelines.
• Provide workable solutions: Offer solutions (or alternatives) based on customers’ requirements.
• Conduct product training: Provide training on our products to customers, partners, and internal teams.
• Perform installations and configurations: Carry out installations and configurations independently using product manuals.
• Upskill and certification: You will upskill and obtain technical certifications for the products or technologies you handle, as applicable.
• Subject matter expertise: Over time, become a subject matter expert to assist in transferring domain knowledge and technical skills to our maintenance team to better support our customers.
• Technical assistance: Support the sales and support teams in technical matters, such as product feature clarification, implementation considerations, tender compliance, and other ad-hoc situations.
• Troubleshoot server, application, and network-related problems: Diagnose and resolve issues affecting servers, applications, and networks to ensure minimal downtime and optimal performance.
• Documentation and Reporting: Maintain accurate documentation of network security infrastructure, configurations, and incident response activities. Generate comprehensive reports on security incidents, vulnerabilities, and remediation efforts for management and stakeholders to ensure transparency and informed decision-making.

Job Requirements:

• Positive and professional working attitude.
• Ability to work both independently and as part of a team.
• Capable of handling stress, meeting tight deadlines, and thriving in a fast-paced environment.
• Nitec/Higher Nitec certificate, Diploma or Degree in IT, IS, Cyber Security, or related fields.
• Good fundamental knowledge in Networking.
• Strong understanding of technology infrastructures such as Firewalls, VPN, DLP, IDS/IPS, Web-Proxy, DNS, Email Security, Log Management, SIEM, Virtualization, Containers, AWS, Azure, Google cloud, DevOps/DevSecOps, Privilege Account Security, Identify Access Management, Endpoint Security, CyberArk Conjur.
• Demonstrate a strong interest in staying updated on cybersecurity trends and hacking techniques.
• Proficiency in programming language like Python, C++, Java, JavaScript, Ruby, Bash scripting, and Power Shell is advantageous.
• Compliance with Company Information Security Standards.

Other Information:

• Working hours: 9am to 6pm, Monday to Friday*
• Training consisting of in-house and vendor-led will be provided. Additional sponsored training available to confirmed staffs subject to performance assessment.
• This position is suitable for individuals with a strong technical foundation but limited professional experience. Recent graduates or those seeking to transition into a technical role are encouraged to apply.

*Expected to work on after office hours, Sat/Sun/Holidays when required by customers.

Interested candidates, please apply via the “Apply Now” button below.

We regret that only shortlisted candidates will be notified.

Job Description:

• To own, maintain and improve the following indices: Quality, Uptime and Cost.
• Sustain equipment KPI and make continuous improvements to enhance the performance.
• Monitor and control equipment performance indices. Optimize PM procedures to make it more effective and efficient.
• Coordinate with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Manage the expenditure allocated for equipment maintenance without compromising on quality output.
• Continuous improvement of equipment KPI in terms of quality, uptime and costs.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Coach and Mentor subordinates to ensure that skill level and knowledge are up to date, and continuously give feedback on their work performance.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Participate in CIP programs to optimize equipment utilization and cost of maintenance.
• Become the technical Expert for the respective machine specialization.
• Know how to use SPACE to monitor and analyze SPC charts. Know how to use JMP to analyze engineering experiments. Know how to use measurement instruments effectively in data collection.
• Understand FMEA and be able to generate FMEA analysis for new tool. Able to utilize it to identify tool weaknesses and derive the top 3 to 5 risk factors.
• Able to create PROMIS (SiView) DC OP and SPC charts.
• Coordinate new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production.
• Wafer scrap reduction awareness and mindset.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers.
• Self audit and update specifications to meet TS16949 Quality Standard requirements.
• Se expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager.

Job Requirements:

• Bachelor Degree in Electrical / Electronics / Chemical / Mechanical /Microelctronics Engineering
• Min 5 years of relevant work experience in Photo Equipment (Track) in semiconductor industry
• Excellent communication, interpersonal and leadership skills
• Strong analytical skill and able to work under pressure in fast pace environment
• Proficient with MS Power Point, Excel, Excel VBA, Power BI

Job Description

• Follow SOP and carry out CAS per specification.
• Execute scheduled / special preventive maintenance (PM) as per PM schedule and
• specifications.
• Troubleshoot basic equipment related issues and minimize equipment downtime.
• Maintain good housekeeping in the production floor / sub FAB / Office, and maintenance
• support areas.
• Ensure and follow good safety practice and also safe custody of tools, equipment and
• other properties belonging to the Module.
• Know how to use SPACE to monitor and analyze SPC charts. Understand all the PR rules
• and follow CAS correctly.
• Know how to use measurement instruments effectively in data collection. Able to create
• metrology job files correctly (equipment list to be defined by the Supervisors.)
• Perform shift duties (12-hours shift) to support the running of production in the Module and
• ensure equipment readiness and worthiness for production.
• Assist Engineer in the installation and hook up of new or upgrading equipment.
• Assist in implementing equipment improvement projects.
• Able to train operators and trainers in new operational procedures.
• Execute good maintenance of support tools.
• Assist new Technician/Associate Engineers on their On-The-Job-Training (OJT) by acting
• as their buddy.
• Provide proper and accurate passed down of line issues and documentation (fill up and file
• the checklists).
• Wafer scrap reduction awareness.
• Participate in CIP programs to improve productivity and quality of equipment/process.
• Coordinate with operators to ensure efficiency of work to meet Mfg and Module objectives

Job Requirements:

• Diploma Electrical / Electronics / Mechanical / Mechatronics / Microelectronics
• Experience in Etch tools / equipment (AMAT / Mattson)
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Department: Regional Information Systems Division
Reports to: Regional IT General Manager
Functional Relationships with: Global Security Team, ASEAN Business Units, ASEAN local IT divisions

Successful candidate will: Be engaged and responsible for SecOps (security operations), security incident handling, SOC response, etc as a Senior Specialist, Information Security Incident Response Lead, responsible for CSIRT operations in cyber security

Key Duties & Responsibilities
• Be responsible for handling overall SecOps in cooperation with partner IT vendors and related internal departments as a member of the incident handling team within CSIRT
• Work with partner IT vendors that maintain information security infrastructure tools implemented in our company
• Monitor and continuously assess the IT security aspects and impact.
• Knowledge and strong understanding on CIS CSC to continuously improve IT security
• Reporting to Regional IT General Manager and the head of Global Security Team

Responsibilities:

• While increasing cyber security risks, we must strengthen its security measures to secure our business expansion.
• He/She will be able to keep updating our skill sets by touching on the latest technology trends as we continue introducing new services and technologies to achieve "Zero Trust” and “IT/OT cyber security”.
• In addition, he/she can obtain a global business perspective since there are many opportunities to discuss security countermeasures with overseas members by crossing the border

1. Cyber incident response

• He/She must enhance the process of incident handling and our ability to respond to incidents through the implementation of security solutions, training, and incident-handling experiences

2. Vulnerability Assessment on platform and application/implementation of countermeasures

• Based on the results of various diagnostics and tools, countermeasures against vulnerabilities will be promoted together with each application engineer. We will also work with the CCoE team and PSIRT to implement measures for cloud environments, promote pre-release diagnostics, and add tools to meet operational requirements in the production environment.

3. Implementation and Maintenance of security solutions

• Client is developing advanced solutions for emerging threats.
• He/she must be responsible for the selection of suitable security products to fit our maintenance and operation requirements and lead PoC and implementation with well-designed operations

Ability / Competency Required

• Bachelor or Master’s Degree in Computer Science, Information Systems, or equivalent experience.
• Minimum three years of experience in the Cyber Security and Infrastructure fields
• Security tool implementation and operational experience/application security technology experience
• CISSP - Certified Information Systems Security Professional Certifications

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - https://go.persolkelly.com/job/apply/7657

We regret to inform you that only shortlisted candidates will be notified.

Siow Ee Sheng | REG No : R23118145

PERSOLKELLY SINGAPORE PTE LTD | EA License No : 01C4394

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Responsibilities:

• Coordinate and Supervise project work on various site
• Manage project schedule efficiently
• Review M & E Drawings
• Follow up on drawing discrepancies
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants, and suppliers on all project related matter

Requirements:

• ITE/Poly/Diploma/Degree in Electrical in any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/Microsoft Office/Microsoft Project)
• Independent, resourceful, pro-active and team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines

Responsibilities:

• Support the QA/QC activities for civil and structural works
• Carry out QC works for works on site and provide inputs to operations team
• Ensure that the work executed is in accordance with the quality control procedures and contractual requirements
• Coordinate with client, project teams, departments and external parties
• Identify potential technical issues and provide recommendations to rectify it

Requirements:

• Degree in Civil Engineering or related discipline
• At least 5 years’ experience in similar role in the construction industry
• Candidates with previous experience working on LTA projects will have an added advantage
• Excellent team player, good interpersonal skills and a “can-do” attitude
• Ability to multi-task in a fast paced and dynamic environment

Information provided in response to this job advertisement will be treated in strict confidence and be used for recruitment purpose only.

Our client has more than 20 restaurants in Singapore that provide various dining concepts that refined tastes of both local and international food enthusiasts.

• In charge of implementing and managing food safety and quality assurance programs across the Central Kitchen and all outlets.
• Perform training in SOPs, food hygiene and food handling techniques.
• Work closely with vendors and contractors on maintenance matters concerning to food safety and QA issues.
• Ensure all SOPs are adhered to at Central Kitchen & outlets

Requirements:

• Diploma in Food Science & Technology or related field
• At least 2 years of QA experience in the F&B industry.
• Meticulous and highly motivated.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

The Senior QA Lead will oversee the activity of the quality assurance department and staff, developing, implementing and maintaining a system of quality and reliability testing for the organisation’s product and development processes.

Responsibilities

• Oversees the daily workflow and schedules of the department
• Develops, implements and manages processes to ensure that products meet required specifications for quality prior to delivery.
• Communicates quality standards and parameters to QA and Production team.
• Identify and analyses issues, defects and other problems, particularly when problem recur in multiple products; recommend and facilitates solution to these issues
• Review client, customer and user feedback
• Conduct internal reviews and audits based on QMS ISO 9001
• Prepare First-Article reports
• Participate in ISO 9001 internal annual audit
• Perform other ad-hoc duties as assigned by the management team

Requirements

• Excellent verbal and written communication skills
• Good interpersonal and customer service skills
• Attention to details with strong analytical and problem-solving skills
• Proficient with Microsoft Office Suite
• 3 to 5 years of experience in related field with supervisory experience a plus

Education Qualification

Bachelor's Degree or diploma

Working Location: Tuas Link 1

Working Hours: Monday to Friday, 8.30am to 6pm

Responsibilities:

• Design of hydraulic schematics
• Sourcing and sizing of components
• Modelling and drafting using CAD software
• Generate the EBOM and prepare design documents
• Integrate and testing of hydro-pneumatics system

Requirements:

• Keen interest in Mobile System Hydraulics and Pneumatics engineering and technology
• Must be competent with CAD Software such as Unigraphics and SolidWorks
• Knowledge in drafting, geometric dimensioning & tolerancing (GD&T) preferred
• Able to read and interpret fabrication/ mechanical/ assembly drawings
• Able to read and interpret electrical/ hydraulics/ pneumatic schematics
• Strong analytical skills is a plus
• Possessing a valid class 3 license is a plus
• Able to work independently and effectively with peers, resourceful and keen to learn
• Must be a team player with good communication skills
• Willing to perform hands-on work in the workshop/on the vehicle

• Position : Senior Project Engineer (Building & Construction/Civil Engineering) - Up to $7,500
• Location : Resorts World Sentosa
• Working hours : Monday to Saturday | 8am to 5pm
• Salary (commensurate with experience) : Up to $7,500 + Performance Bonus + Transport Allowance + 14 Days Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Engineering & Construction

Main Responsibilities:

• Monitor and manage the day-to-day operations of project
• Create project plans, schedules and budgets
• Liaise with Subcontractors, Surveyors and Site Supervisors/Foremen to make sure that works are carried out in time and smoothly on site
• Attend regular meetings with Owner/Client/Contractors/Subcontractors on the project related matters
• Carry out site inspection and ensure that the works are executed to the required quality standards

Requirements:

• Degree in Civil Engineering or equivalent with minimum 4 - 5 years of working experience in Building & Construction Industry.
• A team player with positive working attitude
• Bilingual in English and Mandarin to communicate with Chinese clients who can only speak mandarin.

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

Key Responsibilities:

• Partner with multidisciplinary teams to craft, build, and launch top-tier software applications, spanning mobile and web interfaces, as well as corresponding backend systems.
• Advocate for and implement industry-leading software development methodologies, including collaborative coding, peer review, and test-driven development.
• Spearhead technical forums, design system architectures, and coach team members to cultivate expertise and excellence.

Requirements:

• A minimum of 5 years of experience as a full-stack developer, with a demonstrated history of delivering high-performance, scalable solutions.
• In-depth knowledge of modern web development frameworks, including ReactJS, NextJS, TypeScript, and Kotlin/Java.
• Skilled in designing, implementing, and managing continuous integration and delivery pipelines, with expertise in deploying applications on cloud-based platforms such as AWS.
• Familiarity with database migration tools and techniques is a plus.
• Experience working in Agile/Scrum environments is also desirable.
• Excellent verbal and written communication skills, with the ability to clearly articulate complex technical concepts.
• A self-driven and proactive individual with a strong passion for innovation and continuous improvement.

We regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

Data provided is for recruitment purposes only

EA Registration Number: R21102607

Business Registration Number: 201735941W

Licence Number: 18S9037

http://www.dadaconsultants.com/

—------------

EA License number : 20S0283

EA Personnel : R1332294

• Responsible for assembly of optics assembly or optical-mechanical assemblies
• Adjusts, calibrates, aligns, and modifies optical-mechanical assemblies and components and records effects on unit performance
• Troubleshooting, repairing and testing of optical-mechanical systems

Requirements:

• Diploma in Mechatronics, Mechanical, Electronics or equivalent. Entry level position is available.
• Experience using jigs and fixtures to align and bond optics with high precision
• Experience with methods of handling and cleaning optic elements
• Good team player and yet able to work independently
• Work location: Ang Mo Kio
• 5 days work-week, normal office hours

Interested candidates, please forward a detailed resume and email to career{a}tempserv.com.sg

Tempserv Pte Ltd

License No: 06C3745

Attention: Wee Wan Qi / EA Personnel No: R22109446

Executive Summary

Smart IMS Inc provides Digital technology & Cloud transformation services, Application & Infrastructure Management Services, Unified Communications and Insurance implementation services to customers across the Americas, Europe, Middle East, and Asia-Pacific regions. As the trusted technology and business partner of leading MNCs, including Global Investment Banks, Smart IMS is also a Microsoft Gold Certified Partner, Oracle Platinum Partner and AWS MSP Partner.

We are looking to hire a VMware Engineer to support our client in Singapore which is a top global investment bank. The role of the incumbent is to handle the installation, configuration and management of the VMware private cloud computing platform. With his knowledge and skills, he/she can suggest amendments in the current installation / configuration procedures, which are more beneficial to the respective implementation project(s) at hand.

Responsibilities:

• Involved in the installation, configuration and management of VMware private cloud computing platform
• Install new components into production environment as laid out by Virtualization Engineering Team(s)
• Make configuration amendments into the existing production plant
• Ability to present ideas in business-friendly and user-friendly language appropriate to both executive and managerial audiences.
• Ability to effectively manage relationships with other implementation teams, application teams, stakeholders, business and customer representatives.
• Organizational skills with attention to task details, documentation and target dates.
• Strong written, oral, and interpersonal communication skills.
• Team orientated, willing to share knowledge and collaborate with peers.
• Proven analytical, strategic vision drawing on strong problem-solving abilities.
• Able to prioritize and execute tasks in a high-pressure environment.
• Ability to conduct research into server, storage, virtualization issues, standards, and products.

Requirements:

• 5-7+ years of previous experience Implementing / Architecting & virtualization experience, across multiple vendor and technologies.
• In-depth understanding of Cloud, Server, Storage, and Virtualization architecture design techniques, theories, principles, and practices.
• Solid experience in implementing enterprise Cloud, Virtualization, Server and Storage systems within a broad spectrum of technologies.
• Excellent Knowledge of Private, Public and Hybrid Cloud environments
• Excellent Knowledge of Cloud Orchestration platforms
• Intermediate knowledge of Windows Server, Linux, in HA/DR type configurations.
• Excellent knowledge of Sever hardware platforms: x86
• VMWARE Cloud, Virtualization, Server and Storage vendor Certifications Preferred.
• Strong knowledge & working experience of VMWare modules such as ESXi, vSphere, vSAN, vRA, VRO, VROPs, vRLI, NSX-T, Horizon View
• Strong knowledge of SAN, NAS, DAS, RAID, SCSI, Fibre Channel, Backup to Disk, clustering, encryption technologies from multiple vendors.
• Strong proficiency in PowerShell, Shell scripting / Python / Ansible development

Working Day: Mon to Fri 8.30pm- 5.50pm

Salary: $3500 - $4000

Location: Bedok office & client site

Job scope:

• To provide necessary post-project application software support to the client
• Troubleshoot, debug, enhance and optimise programs
• Develop new applications

Requirements:

• Candidate must possess at least a Diploma or Degree in Engineering, Computer Science/Information Technology or equivalent.
• Knowledge in Oracle PL/SQL, Oracle Pro-C programs, Unix ANSI C, visual basic.net using Visual Studio 17, Unix scripting
• At least 1 year relevant experience in end user and operation support

Low Jia Yi R22104302

The Supreme HR Advisory Pte Ltd 14C7279

We are hiring an Asst Engineer/Engineer to maintain and ensure live systems are up and running smoothly 24/7. Candidates should be equipped with technical disciplines in System-Level Maintenance with knowledge of Radio Communications, Basic Networking Skills, Computer/Servers Management, Embedded Systems and/or UPS.

Responsibilities:

Involve in one or more teams in supporting and maintaining systems.

• Report to the Team Lead/Service Delivery Manager to fulfil contractual KPI.
• Assist Team Lead/Service Delivery Manager to deliver contract deliverables within budget.
• Able to operate and thrive in a dynamic work environment where you are required to liaise with both internal and external stakeholders.
• To perform routine Preventive Maintenance in accordance with the maintenance instructions / procedures.
• To carry out Corrective Maintenance in accordance with the maintenance instructions / procedures.
• Liaison with procurement and vendors.
• Perform after-office hour standby for fault activation.
• Arrange and attend monthly meetings with customers.
• Provide engineering services and support to facilitate equipment adequacy, obsolescence, configuration and design.
• Provide or recommend technical solutions to mitigate Radio Frequency Communication systems/equipment failures.
• Required to travel and work at customer premise(s).

Requirements:

• Higher Nitec or Diploma in Electronics/Electrical/Mechatronics/Computer Engineering or equivalent.
• Positive work ethics and team player.
• Takes ownership of responsibilities.
• Thrive in multi-disciplinary and cross-functional environments.
• Able to work effectively in an indoor and outdoor environment.
• Preferably with some knowledge in Data Analytics (e.g. failure trending/patterns).
• Preferably with experience in System-Level Maintenance in the following disciplines: (Radio Communications, basic networking skills, computer/servers, embedded systems and/or UPS). Other Engineering-related experience maybe considered.
• Evident in written, verbal and interpersonal skills.
• Proficient in MS Office (Words, Power-point & Excel).
• Preferably with Class 3 Driving License.

Other Information:

• Office working hours (0830H to 1800H).
• 5 Days work week with standby / Recall duties required (allowances provided)
• Required to climb up and down due to need to work at height, if required and carry heavy equipment.
• Fresh graduates are welcome to apply.

Interested candidates, please forward a detailed resume and email to career{a}tempserv.com.sg

Tempserv Pte Ltd

License No: 06C3745

Attention: Wee Wan Qi / EA Personnel No: R22109446

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD