• Manage project scope, cost, schedule and quality of work from site preparation stage till project completion and handover to clients
• Review contract/ tender agreement and highlight the compliances or deviations of the terms & conditions and technical specifications
• Liaise with agencies, clients and manage sub-contractors
• Ensure work is carried out according to approved plans, quality standard procedure, safety requirements and in a timely manner
• Planning, scheduling and implementing project maintenance works
• Manage cost, work measurement and collection of performance data
• Ensure project technical issues are monitored and resolved

Requirements:-

• Degree or Diploma in Electrical Engineering (Power Engineering)
• Technically skilled and knowledgeable in electrical works & installation
• Relevant experience in sustainable energy projects such as Photovoltaic, Battery Energy Storage and Electrical Vehicle Charging System
• Min 3 years of project management experience
• Leadership skill and able to lead a project team
• Good communication skill and able to interact with all levels
• Possess own vehicle

Responsibilities

• Serves as a subject matter expert in E&I equipment failures and ensures the reliability of those equipments.
• Provides technical expertise to plant personnel (Supervisors and technicians) on troubleshooting failures, repairs, and ensuring E&I equipment meets the design intent.
• Diagnose and troubleshoot critical and major plant issues related to E&I, participate in Root Cause Analysis (RCA) to identify solutions, and drive continuous plant improvement initiatives while managing costs effectively.
• Troubleshoot and maintain PLC (Programmable Logic Controller / SIS), with a strong emphasis on experience with Allan Bradley PLCs.
• Provide expertise in maintaining electrical systems, including switchgear, transformers, MV/LV switchboards, Fire alarm and CCTV systems.
• Mentor technicians in executing preventive and corrective maintenance tasks, ensuring adherence to procedures and standards.
• Supports Team Lead in developing the maintenance budget to support the maintenance strategy.
• Ensure adherence to plant Health, Safety, and Environment (HSE) standards. Actively participate in HSE walkdowns and initiatives to maintain high safety standards.

Requirements:

• Bachelor’s degree in electrical engineering or Instrumentation / Maintenance Engineering.
• At least 3 years of experience in Electrical and Instrumentation Maintenance in a chemical or petrochemical or pharmaceutical plant operations.
• Strong knowledge of field instrumentation, electrical systems, control systems, and industry standards.
• Excellent analytical and troubleshooting abilities with a methodical approach to problem resolution.
• Proven ability to work effectively in a team environment, fostering collaboration and teamwork.
• Strong communication and interpersonal skills, with the ability to present technical information clearly to various stakeholders.
• Demonstrated ability to stay current with new technologies and apply innovative solutions to optimize plant operations.
• Effective leadership and mentoring skills with a commitment to developing team members.
• Flexible and resourceful, with a positive attitude and willingness to learn from experienced colleagues

Interested candidated can email your latest CV to [email protected]

RESPONSIBILITY
· Plan and allocate tools, material and manpower for fabrication;
· Ensure that all the technical reviews by engineering team comply with project requirements;
· Coordinate all technical queries with related parties – engineering team, client, vendor etc;
· Assist Project Manager in streamlining work processes;
· Coordinator with team to review all subcontract and supplier shop drawing, product data, samples,
manuals etc for all compliance with contract documents;
· Manage vendor documents for all equipment;
· Monitor and ensure all the vendor equipment delivery are on time, including checks on inspection status and requirement;
· Prepare tender submission, cost estimation and project change request;

*Prepare monthly P&L reporting.

*Able to use AutoCAD – Advance Steel Software.
· Any other duties as assigned.

Please note that duties of the Employee may change and develop over time.

REQUIREMENTS

· Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Mechanical) or equivalent

· Proficient in design software such as PV AutoCAD

· Proficiency in English language (spoken and written) with strong communication skills

Information :

Working Hours : Mon~Fri 8:15am to 5:45pm

*Might required to work onboard the vessel and travel occasionally.*

Responsibilities :

1. Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

2. Maintain quality record and file quality data.

3. Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

4. Ensure that all non-conforming products are not mixed with good products prior to disposition.

5. Authorise the rejection of parts if found unsatisfactory.

6. Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

7. Perform factory routine test and check of switchboards completed in the workshop.

8. Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

9. Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

10. Assist the Manager in quality responsibilities and achieving quality objectives.

11. Maintain good housekeeping in the QA Department.

12. Observe and adhere to safety rules during the performance of every task.

13. Ensure the use of calibrated instrument for inspection.

14. Initiate action to prevent the occurrence of Product Non-Conformity.

15. Initiate, recommend or provide solutions to problem detected.

16. Verify the implementation of solutions.

17. Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

18. Carry out other responsibilities as and when assigned by the superiors.

19. Follow the procedures of Quality Management System for effective implementation and control.

Requirements :

1. 2 years QA Experience in Marine or Industrial

2. Diploma in Electrical Engineering or ITE with relevant experiences

3. Able to speak Chinese

4. Required to work onboard the vessel and travel occasionally.

Interested candidate can send in your resume in Microsoft Words, along with a picture of yourself to :

[email protected]

We regret to inform that only shortlisted candidates will be notified.

Thank you for applying.

Carol Tan

EA License No.: 23C1894

EA Personnel No.: R24121972

Position Summary

• To ensure legal compliance for all activities within assigned area of responsibility.
• To ensure a safe and healthy work environment within assigned area of responsibility.

Responsible for: (The main job activities)

• Ensure legal compliance for all activities within relevant regulatory framework and PaxOcean’s HSE Management System
• Support HSE Manager to implement and execute HSE Programs & Initiatives
• Plan, conduct and participate in audits to identify potential areas of improvement and best practices.
• Organise and conduct regular HSE site inspections with all relevant stakeholders and follow up on all identified non-conformances
• Function as a safety assessor as per relevant regulatory requirements
• Function as a Site Incident Controller (SIC) and lead the Company Emergency Response Team (CERT) during emergency situations
• To serve as secretary for the Vessel Safety Coordination Committee (VSCC) for all assigned projects
• Initiate and conduct investigation for the purpose of identifying root causes upon any occurrences
• Liaise with relevant authorities as point of contact representing PaxOcean
• Any other tasks or responsibilities as assigned by HSE Head

Job Requirements

• Diploma / Degree in any Engineering field or related discipline
• Hot work Assessor
• Confined Space Assessor
• Work at Height Assessor
• Relevant emergency response certifications will be an added advantage
• WSH Level C
• Candidates without prior experience are encouraged to apply.

Job Responsibilities:

• Responsible for leading the planning and design of Mechanical engineering works for building services and infrastructure works.
• Review reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Supervise the installation, testing and commissioning of Mechanical engineering works.
• Work together with other disciplines in feasibility studies and design, as well as to ensure excellent service delivery to Clients.
• Job Title will correspond with project experience acquired and individual competency in technical knowledge/skills, project management and contract administration.

Job Requirements:

• Degree in Mechanical Engineering recognised by the Professional Engineers Board, Singapore.
• Ideally registered with the Professional Engineers Board, Singapore.
• Minimum 6-8 years of relevant experience in Mechanical engineering design for building services and infrastructure works.
• Good working experience in a consulting firm with a proven track record in major development projects.
• Conversant with local codes and regulations, and authority submission procedures.
• Strong planning, organizational and supervisory skills.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.

The person will be responsible for

1) Prepare & compile Monthly Progress Claim for all the projects;

2) Prepare & submit Variation Order for all projects where applicable;

3) Quantity Take-off;

4) Assist in monitoring & compilation of all ISO 9001, ISO14001 & ISO45001 documentation for Audit & BCA Accreditation;

5) Any others relevant task that maybe assign from time to time

Qualifications : Diploma in related field;

Experience : Fresh or 2 years relevant experience will be added advantage;

Key Responsibilities:

• Design and develop electrical systems, components, and wiring diagrams.
• Design and oversee the electronics hardware design activities of the whole product.
• Select electrical/electronics components for new product development, and replacement for existing products as well.
• Conduct electrical testing and troubleshoot systems to ensure functionality.
• Collaborate with cross-functional teams (e.g., mechanical) on product development.
• Liaise with supplier and operation for design improvement.
• Provide technical support of products introduced into both the domestic and international markets.
• Work closely with a multidisciplinary team to drive cost optimization, manufacturability, quality and reliability.
• Provide technical support during installation, commissioning, and maintenance of systems.

Requirements:

• Bachelor’s degree in electrical engineering or related field.
• Proficient in electrical design software tools
• Strong knowledge of electrical systems, power distribution, control systems, and circuit design.
• Strong problem-solving skills and attention to detail.
• Hands-on experience with hardware testing, troubleshooting, and equipment commissioning.
• Experience in microcontroller platform hardware design is a plus
• Knowledge of HVAC systems is a plus.

NextLabs® is the leading provider of policy-driven information risk management (IRM) software for large enterprises, provides an exciting opportunity for Senior Software Engineers to join hands with highly talented software engineers in building the next generation data protection and entitlement manager products. Our customers include many prominent enterprises in Aerospace & Defense, Financial Services, and High-Tech Manufacturing and Engineering industries. NextLabs’ flagship data protection and entitlement management products, Enterprise Data Protection and Compliant Enterprise®, combine with the Control Center XACML-based policy management platform with integrated content aware and identity-driven enforcement technology to offer the most comprehensive information risk management (IRM) solution. Our products preserve confidentiality, prevent data loss, and ensure compliance across more channels and more points, within a single unified solution with the unmatched user acceptance and Total Cost of Ownership (TCO).

We’re looking for highly motivated software engineers to join our global agile scrum team responsible for designing and building cutting edge solutions and next generation containerized products deployed in cloud (AWS/Azure/GCP). A successful candidate will be part of a learning culture, where teamwork and collaboration are encouraged, excellence is rewarded, and diversity is respected and valued.

Responsibilities:

· Write well structured, testable, efficient, reusable, maintainable and scalable code

· Collaborate with global teams to define, design, and develop cutting edge software applications, micro services and APIs on cloud using Java.

· Stay up-to-date with software technologies and methodologies

· Work with Professional Services to ensure solution is supportable

Requirements:

· Possess at least a Bachelor's Degree/Diploma in computer science or a related field.

· Good understanding of software architecture, programming practices and design patterns in Java.

· Hands-on in Spring Boot, Spring MVC frameworks, Hibernate, Junit, Gradle/Maven.

· Experience in building REST APIs

· Working knowledge of one or more RDMS like Postgresql, Oracle, Microsoft SQL

· Experience with Docker and orchestration frameworks like Kubernetes is a plus

· Understanding of one or more cloud platforms like AWS, GCP, Azure, OpenShift, Rancher is a plus

· Basic knowledge of UNIX, shell scripting

· Strong organizational and communication skills

· Strong analytical skills

· Self-motivated and ability to learn new technologies

· Minimum of 4 years experience

Interested candidates may send resume to [email protected] or use our online form at https://www.nextlabs.com/career.

We are seeking a Research Engineer to join a university-level research centre collaborating with industry. Successful candidates will be involved in a project that is related to 3D Animation.

Key Responsibilities:

• Design and implement user interfaces for interactive 3D animation tools and systems.
• Build dynamic web applications using modern front-end frameworks.
• Collaborate with back-end developers to integrate front-end solutions with server-side logic.
• Optimize web applications for maximum speed and scalability.
• Develop and maintain RESTful APIs for efficient communication between components.
• Contribute to database design, development, and optimization for project needs.
• Utilize containerization technologies like Docker for application deployment and scaling.

Job Requirements:

• Bachelor’s degree in relevant disciplines.
• Proficiency in HTML5, CSS3, and JavaScript.
• Hands-on experience with Vue.js or similar front-end frameworks.
• Familiarity with the Django back-end framework for server-side development.
• Strong knowledge of database design and optimization.
• Experience in designing and developing RESTful APIs.
• Working knowledge of containerization technologies such as Docker.
• Ability to work collaboratively within a multidisciplinary team and deliver high-quality code.

We regret that only shortlisted candidates will be notified.

About the Company:

The company started with civil engineering contracts and progressively expanded into addition and alteration, demolition, civil engineering, and general building works.

Job Responsibilities:

• Assist the Project Manager in overseeing the complete lifecycle of projects, including planning, coordination, execution, and control.
• Assist in building and guiding project teams, providing direction, and support to achieve project goals.
• Assign tasks and responsibilities to team members, ensuring effective resource allocation.
• Develop and maintain project timelines and regularly monitor progress.
• Assist in generating reports that outline project status, issues, and proposed solutions.
• Address conflicts and resolve issues within the project team.
• Analyze and troubleshoot problem areas, adjusting strategies as required.
• Mentor and motivate team members, fostering a positive and accountable work environment.
• Undertake additional tasks and assignments as they arise.

Job Requirements:

• Hold a Diploma/Degree in Civil Engineering.
• Possess a minimum of 2 years of experience in the civil engineering industry.
• Exhibit strong communication skills.
• Have relevant on-site experience.
• Possess excellent problem-solving abilities.
• Can work effectively under pressure and take initiative.

How to Apply:
Interested candidates, please submit your updated resume by using Quick Apply button
We regret to inform that only shortlisted candidates will be informed.

Yip Seow Thung
Registration Number: R24121304
EA License No: 18C902

Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

Position Summary

Independently to develop and apply Electrical & Automation design and knowhow on marine and offshore vessel to comply with Class and Technical specification requirements.

Tasks and Responsibilities

• Involved in all electrical engineering designs, calculations, preparing bill of materials, and liaise with customer and suppliers for any engineering query.
• Involved in design and construction document preparation and submissions.
• Involved in technical reviews and clarifications with customer and suppliers.
• Involved in coordination of design with other engineering disciplines.
• Involved in construction, installation, testing and commission activities.
• Involve in identifying the Company scope of work in the project.
• Involve in solving technical issues that arise in the project.
• Involve in monitor the progress of the document submission.
• Some drafting scope and also guide drafters for drafting

Job Requirement

• Minimum 3-5 years of relevant work experience in the marine/offshore industry Electrical & Automation newbuilding engineering design.
• Must know basic electrical design knowledge.
• Know how to do electrical cable sizing, voltage drop, cable gland sizing and cable schedule.
• Know how to do lighting calculation and can operate lighting software like Dialux and etc.
• Know how to do overcurrent protection device sizing and selection.
• Know how to do electrical equipment installation.
• Know how to operate and draw in AutoCAD.
• Have knowledge in basic fire and gas detection.
• Have knowledge in basic HVAC electrical and instrumentation.
• Must know how to operate MS office (minimum Word and Excel).
• Minimum Diploma/Degree in Engineering or related field

Position Summary

Independently handling design project and develop naval architecture & hull design.

Provide assistance in enhancing the skills and knowledge of team members to support their professional development.

Tasks and Responsibilities

• Liaise with Owner/ Class/ External Designer for the specific design requirement and provide technical solution.
• Lead team to general conceptual and basic design.
• Design and deliver tailored training programs, provide one-on-one coaching, and ensuring alignment with organizational objectives and industry practices.
• Perform naval architecture calculations such as speed performance prediction, stability/hydrostatic, scantling assessment, weight distribution, launching calculation and etc.
• Responsible for delivering the respective project design drawing and document.

Job Requirements

• Bachelor’s degree in Marine Engineering, Naval Architecture, or a related field.
• Minimum 15 years of relevant work experience in the marine/offshore industry Hull & Hull / Naval Architecture design.
• Good knowledge and skill on coaching and structural/naval architecture design.
• Familiar with GHS/NAPA/FEMAP/Autocad/MS office
• Good communication, analytical skills
• Willingness to learn and adapt to new challenges.

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Description

• Prepare and submit MSRA prior to the commencement of work
• Liaise with SO team to clear off inspection.
• Lead the site supervisor in clearing off site inspection, and to check and ensure that the work is carried out safely as per drawing, and is of good quality.
• Coordinate with subcontractor to resolve the issues and to ensure that the work is carried out as per approved MSRA & design, and to meet the schedules.
• Check and ensure all the temporary work is carried out as per PE design.

Requirements

• Degree in Civil, Mechanical or Electrical, or a related field.
• Min 2 to 3 Years Relevant Work Experience (MEICA)
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Construction Engineer Responsibilities:

• Managing the planning and design stages of construction projects.
• Contributing technical expertise to project drawings and designs.
• Performing cost calculations and preparing financial projections.
• Preparing work schedules in collaboration with the project manager.
• Liaising between contractors, subcontractors, vendors, and suppliers.
• Overseeing construction engineering processes.
• Performing regular tests on materials and procedures to ensure compliance with industry regulations.
• Ensuring that the construction project is completed on time and within budget.
• Documenting processes and keeping detailed construction logs.
• Presenting construction project progress updates to clients and senior managers.

Construction Engineer Requirements:

• Bachelor's degree in civil engineering, civil engineering technology, or similar.
• State-approved license.
• At least 2 years experience as a construction engineer in the relevant field of specialization.
• Advance proficiency in construction management software, such as BuildSmart and Smartsheet.
• In-depth knowledge of construction industry regulations.
• Exceptional leadership, project management, decision-making, and problem-solving skills.
• Great mathematical, organizational, and time-management skills.
• Excellent written and verbal communication skills.
• Ability to collaborate with a variety of stakeholders.
• Availability to visit the construction site outside of business hours, when relevant.

Roles & Responsibilities

The Lead Resident Engineer shall be in the discipline of Electrical, Instrumentation & Control in delivery of large scale power generation project. The Engineer shall have at least 10 years of relevant engineering experience in delivery of large scale industrial/ utilities projects (e.g. waste, water, oil & gas, power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste

treatment).

The duties shall include the following but not limited to:

• Work as owner’s engineer to lead the ICA project implementation at site.
• Assist Chief Resident Engineer in daily supervision and coordination duties for ICA discipline.
• Project delivery planning including time and manpower scheduling.
• Source and interview for Resident Engineers and Resident Technical Officers for ICA discipline
• Strong capability of specification capability for all ICA related specification. e.g. DCS / PLC system configuration, topology and controller, RIO engineering.
• Enforce Specifications, International Standards, Singapore Standards and good practices
• In depth of understanding for automation package for contract implementation of automation systems for WtE project.
• Contracts management of ICA discipline for the WtE project
• Review the EICA submittals from Contractors for Process like Waste Reception system,
• Incinerator-Boiler System, Water Steam Cycle, weighbridge system, building services,
• Enterprise Resources Planning, Communication Network Infrastructure, DCS, PLC, EMIS,PFMS etc.
• Essential understanding of P&ID of process engineering
• Liase with Engineering Manager and the Project Technical Specialists on the review and approval of design submissions including calculations and drawings
• Engage in Technical discussion EICA related issues with contractor and client
• Attend site meetings and resolve technical issues with Contractors
• Define Inspection and Special testing requirement and ensure coordination of those efforts on all contracts
• Ensure the documentation fully complies with the specifications and standards
• Participate in HAZOP review, SIL safety and design for safety workshops
• Work with electrical team closely for all power and process interfaces
• Participation in FAT of automation equipment, DCS, PMS, PLC and RIO
• Provide Technical support in Testing and Commissioning of the plant

Requirements:

• Degree in Electrical / Electronic/Instrumentation & Control Engineering recognized by the Professional Engineers Board
• Registered as Resident Engineer with the Joint Accreditation Committee of the
• Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• At least 10 years of relevant experience in design and construction of large Waste to
• Energy (WTE) project or waste/water management projects in Singapore, particularly experience in power plant or WTE processes.

• Manage project scope, cost, schedule and quality of work from site preparation stage till project completion and handover to clients
• Review contract/ tender agreement and highlight the compliances or deviations of the terms & conditions and technical specifications
• Liaise with agencies, clients and manage sub-contractors
• Ensure work is carried out according to approved plans, quality standard procedure, safety requirements and in a timely manner
• Planning, scheduling and implementing project maintenance works
• Manage cost, work measurement and collection of performance data
• Ensure Project technical issues are monitored and resolved

Requirements:-

• Degree or Diploma in Electrical Engineering (Power Engineering)
• Technically skilled and knowledgeable in electrical works & installation
• Relevant experience in sustainable energy projects such as Photovoltaic, Battery Energy Storage and Electrical Vehicle Charging System
• Min 3 years of project management experience
• Leadership skill and able to lead a project team
• Good communication skill and able to interact with all levels
• Possess own vehicle

Job Description

1. Perform hands-on Marine/ Electrical / Mechanical / Chemical / ervice & Maintenance and Repairs of Equipment / Instruments on outdoor field, canal, undergound, confine space, underwater, marine coastal

2. Involves working onboard vessel /work boat, canal, underground, river and field sites

3. Involve in integration of instrument / computer devices, programming, setup, configuration, testing and commissioning of remote access and control application.

4. Involve in instrument calibration, knowledge in chemical reagent

5. Planning maintenance schedule and product service report / analysis report / Maintenance Report

6. Involve in Ad-Hoc assignments as and when required

7. Willingness for Standby duties or work after office hour or during weekend and Public Holiday

Requirement:

1. Possess positive attitude to learn, has initiative and independent

2. Relevant educational qualifications in Marine/ Electrical / Mechanical / Structure Engineering (Degree/Diploma)

3. Willing to do field work (outdoor sites, onboard vessel /workboat, underground, canal, water coastal, etc.)

4. Team player

5. No prior experience may also be considered.

6. Confident in Marine Environment

7. Self-driven and motivated individual with critical thinking skill

Interested applicants, please email detail resume to [email protected]

Regret to inform only shortlisted candidates will be notified

Job Descriptions:

* Familiar with analytical systems such as O2, Ammonia, pH, TOC, TRC, Conductivity and etc Analyzer, and instruments (PIT, TIT, FIT, etc)

* Coordinate with internal team, vendors, and contractors to ensure smooth project execution.

* Supervise and lead Installation and Commissioning and initial calibration of various Analyzer, instruments, sensors, etc. Troubleshoot and resolve any technical issues that arise during installation and commissioning.

* Perform Electrical & Pressure Tests, Factory Acceptance Test (FAT), Site Acceptance Tests (SAT)

* Perform site commissioning for instrumentation & Control System, analytical systems and project-related jobs

* Carry out preventive maintenance and corrective maintenance of analytics systems services

* Ensure all documentation is accurate and up-to-date, technical documents, not limited to installation report, testing and commissioning report, etc

* Ensure all installations & commissioning meet customer specifications and industry standards.

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Degree in Engineering (Mechanical, Environmental, Science, Electronics/Electrical Engineering or equivalent qualification)

* Strong analytical & troubleshooting skills

* Preferably 3 - 5 years of working experience or more in the analytical instruments or related field.

* Knowledge of analyzers, instrumentation would be advantageous.

* Able to work independently and write effective good service report

* Good work experience with Hart communicator, calibration, and PLC/SCADA would be advantageous

* Good planning and time management skills to achieve job efficiency.

* Customer orientated with a positive attitude

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Job Descriptions:

* Development & Implementation of IoT Application, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Implementation of IoT, Robotics, Automation, Instrumentation and Control, Testing and Commissioning, Technical Support, Customer Service, PLC Programming, SCADA / HMI programming, Computer and Server, Industrial Networking

* Responsible for design & development, implementation, onsite testing & commissioning, support, documentation and training

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Relevant graduate degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance. Fresh graduates are welcome.

* Hands on experience in IoT implementation

* Knowledge of Building Automation & Process Control

* Experience in IoT, BMS / PLC / HMI process control / automation system, onsite commissioning

* Good technical skills in embeded programming, Allen-Bradley / Siemens PLC programming, SCADA

* Strong problem-solving and analytical skills

* Hardware configuration and software coding

* IT knowledge for Server/Client and Infrastructure

* Electrical, instrumentations and control knowledge

* Customer orientated

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Able to interact well with vendors.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

* Willing to travel to overseas on short notice and work after office hour, weekend and public holiday.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Job Description

* Perform software development and/or Cloud / Virtual / Computer programming with Systems Development Life Cycle (SDLC) methodology

* Implemenmt Cloud Management, Cloud programming, Enterprise Server / Network / Cybersecurity Architecture and databases.

* Develop technical specifications, design, coding, data security, implementation, integration, support, documentation and user guide.

* Experience in Data Analysis and Data Integration

* Handle Design and deliver end-user training and training materials

* Install, configure, troubleshoot and administration of Cybersecurity / System infrastructure/ networking / Windows servers / Disk storage / Cloud Management.

* Provide technical support and management for Server and / or Cloud Application

* Integration & Engineering services

Job Requirements:

* Diploma or Degree in Computer Science, IT or Computer Engineering

* 1-2 Years of similar working experience, Fresh graduate are welcome

* Hands on experience in developing full stack applications in Cloud Computing (AWS, Azure, etc), Cloud Management, Web Application, Computer Application, Process Control Application using, JAVA, NoteJS, Python, etc

* Good technical skills in Database Design, Windows Server, Cloud Application Management;

* Cybersecurity Infrastructure / Networking / firewall implementation and experieice

* Possess positive attitude to learn, has initiative and independent

* Strong analytical skills and able to work under tight timelines

* Strong team player with excellent interpersonal and communication skills, and the ability to work independently Pro-active and able to work in a fast pace environment and handle multiple tasks when required

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

• Familiar with Aluminium Extrusions Material/Products
• Carry out inspection and checking for all quality related procedures in the site and ensures activity at the site are as per approved method statement and inspection test plan.
• Able to prepare the Monthly Report, ITP, Material Approval, Quality Test Records, Request for Inspections and other documents concerning quality control.
• Able to assist the Project Manager during internal audit, external Quality Audit and audit to subcontractors.
• Knowledgeable in different quality controls on ground improvement works, ERSS, road works, concreting, and other civil works.
  Able to liaise with client when required to carry out inspection and obtain approval as per ITP for relevant activity.
• Able to handle quality issues that may arise in different trades and able to provide solutions acceptable to the client.
• Support Quality lead in managing daily QA/QC activity to ensure quality of products shipped out
• Support process validation qualification activity and production part approval process documentation.
  

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,