Responsibilities:

• To oversee the daily operations of QA/QC Department.
• To review and upgrade the quality control activities.
• To initiate, recommend or provide solutions throughdesignated channels.
• To liaise with authority on any relevant rulesand regulationson raw materials.
• To produce new mix design based on customer specifications.
• To implement and monitor Quality Assurance Programme.
• To maintain and improve the quality of ready-mixed concrete supply and execute appropriate corrective action.

Requirement:

• Diploma in Architectural; Civil/ Structural Engineering or Concrete Materials related.
• Preference given to those with 2-3 years' experience as a QC manager in Singapore construction industry, especially in readymix concrete. Senior QC Engineer position will be considered if the candidate is familiar with the trade.
• Dynamic, self motivated, proactive and results-oriented individuals
• Able to start within short notice period will be preferred.

PURPOSE

• Surveyors is to ensure all ISO Tank Containers turned into our depot are surveyed, cleaned and repaired to the customers requirement standard criteria comply to ITCO/ACC or owner criteria.

SCOPE

• Surveyors is to ensure all ISO Tank Containers that have been accepted by MW Tank Depot.

RESPONSIBILITY

• Surveyors is to ensure that all ISO Tank Containers turned into our depot must conduct surveyed.
• Surveyors’ responsibility for all the ISO tank containers turn into depot are thoroughly survey correctly and to ensure the documents are endorsed before issued the Equipment

JOB DESCRIPTION

• All ISO tank containers turn into depot, surveyors ensure to stick a yellow and red colour
• Sticker onto the Left-Hand Side of the corner post before off load.
• Surveyors must coordinate with the Leese/Lessor independent surveyor for joint inspection.
• As part of a Surveyors duties, ensure to conduct thorough inspection after the cleaning, repaired and testing completed.
• Surveyors must thoroughly inspect the Tank Containers and raised estimates after the cleaning completed.
• Surveyors must report to the supervisor on all documentation of ISO Tank containers before sending to customers
• Surveyors will conduct Pre/Post inspection, if require by Customers. (Before Repair and After Repaired)
• As a surveyors must obtain instruction from the Supervisor.
• Surveyors must inform the Side Lifter Drivers to shift the Tank Containers into the
• workshop area for repair when Customers given the approval to repair.
• Surveyors must hand over the approved estimates to the Repairer Supervisor afterthe tank containers shifted into the repair bay.
• Surveyors ensure the repairer repair items accordingly indicated on the estimates and repair standard complies to ITCO/ACC or Owner criteria.

KEY RESULT AREAS (KRA)

1. Inspect quality control of products and services to meet company and customers’ expectations.

• Inspect QA/QC and prepare proper documentation for incoming materials, fabrication, and production

and site installation

• Conduct QC inspection for façade works

• Prepare QC inspection documents and procedures for certification

• Execute QC inspection duties according to schedule in a timely and correct manner

• Perform QC inspection using proper checking tools as assigned

• Conduct QC inspection using work checklist and test plan as assigned

• Support in the inspection and implementation of QMS and audit, including ISO

• Prepare proper documentation and file QC inspection documents

2. Inspect quality of products and services provided by suppliers and vendors.

• Inspect products and services provided by suppliers and vendors

• Conduct QC on key material supplies such as aluminium, extrusions and glass

• Analyse prototypes provided by suppliers and vendors

• Maintain QC information of supplies in QA/QC Systems and Inspection Records

3. Perform stringent inspection to attain highQA/QC in manufacturing and installation processes and methods.

• Inspect manufacturing and installation processes and methods

• Perform method statement and safety risk assessment

• Check tools, equipment calibration procedures and records

• Conduct QC field testing and maintain records

EDUCATIONAL QUALIFICATIONS

• Certificate/Diploma in QA/QC

RELEVANT EXPERIENCE

• Minimum 2–4 years of QA/QC working experience in façade industry with basic knowledge in

product specifications, reading drawings, industry standards, design, engineering, fabrication,

installation and quality

• Familiar with ISO 9001, 14001 and 45001

• Familiarity with Construction Quality Assessment System (CONQUAS) will be an added

advantage

PERSONAL CHARACTERISTICS & BEHAVIOURS

• Meticulous with an eye for details

• Collaborative

• Effective communication skills

• Conscientious

IMPORTANT

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL

Monthly basic salary: $3200 - $4500

Working hours: 8.30am to 6pm, 5 days work week

Location: Serangoon

Job Description

● Working with Process Engineer & Engineering team on QC requirement

● Documenting inspection criteria and quality plan

● Work with QA, Process and Product team on corrective action with quality issue

● Work with Process team on in-process audit and FQC audit

Requirements:

● Minimum Diploma in Manufacturing /Quality Engineering

● At least 1 year of relevant working experience in Electronics Product Manufacturing environment

● Control of Supplier Quality Assurance (SQA)

● Quality control of in-coming, in-process and out-going products

● Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement

● Able to understand IPC requirement in PCB Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts

● Able to converse with the China suppliers

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

EA Personnel.: Chan Jun Wei

EA Registered no.: R1543992

Recruit Now Singapore Pte Ltd

EA License no.: 21C0845

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Key Responsibilities:

• Collaborate with management to align QC strategies with overall business goals, driving organizational capabilities and process improvements to support growth.
• Plan and execute QC activities, supporting the development and implementation of production schedules, policies, and programs.
• Oversee QC and logistics budgets, ensuring alignment with timelines, tasks, and customer quality expectations for on-time delivery.
• Drive QC and logistics operations to meet performance goals, ISO procedural requirements, and compliance with quality management systems.
• Identify, track, and report key performance metrics to monitor QC and logistics process consistency and efficiency.
• Foster a culture of continuous improvement within the QC team to uphold industry standards and customer satisfaction.

Qualifications:

• Proven experience in quality control within the semiconductor industry.
• Strong knowledge of ISO standards and quality management systems.
• Excellent problem-solving and decision-making skills with the ability to drive process improvements.
• Budgeting and project management experience is highly desirable.
• Strong communication, leadership, and team management skills

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Today, Lonza is a global leader in life sciences operating across five continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

Duties And Responsibilities

• To prioritize and perform the various testing/analysis (bioburden, LAL, plating and counting techniques, microbial identification, EM tests i.e. air sampling, surface viable sampling, total particulate sampling etc.) in timely manner.
• Analysis of bulk product according to Standard Operating Procedures and Test Methods.
• Documentation of results in accordance with current Good Manufacturing Practices (cGMP).
• Problem solving of analytical methods as well as troubleshooting of equipment.
• Involvement in method transfers and validation.
• Involved in equipment qualification and technical selection of QC equipment and/or standards and reagents.
• Generation of required trending and reporting information, document revision and update.
• Support / Perform OOS, deviation investigations. Draft investigations reports.
• General lab support including housekeeping, equipment maintenance, inventory of supplies, lab supplies ordering, management of glass wares, autoclaving etc.
• Any other duties as assigned by your Supervisor/Manager

Education / Experience

• Degree/Diploma in a relevant Science field or Equivalent
• 3– 5 years experience in Quality Control
• Strong knowledge of microbiological laboratory operations in a manufacturing environment
• Demonstrates an ability and desire to learn from experience
• Good problem solving and analytical skills

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

Monthly basic salary: ($3200 - $4500)

Working hours: 8.30am to 6pm

Location: Serangoon

5 days work week

Job Description:

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Requirements:

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts
• Able to converse with the China suppliers

Able to start work within short notice will be highly advantageous.

*Please be notified that only shortlisted candidates will be notified*

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: DANIEL WILSON

EA Personnel No: R24125247

EA License No: 21C0845

RECRUIT NOW SINGAPORE PTE LTD

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for QC/LAB Equipment Validation Engineers to join us on a permanent basis to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

• Looking for candidates with 3-5 years QC/Lab Equipment Validation experience.
• Provide technical support to run and validate necessary test methods on lab equipment and in developing method transfer/validation protocols and reports.
• Perform qualification and validation for in process, release and stability equipment (HPLC, UV, TOC, pH, etc).
• Manage day-to-day Quality Control/LAB Validation activities in accordance with approved Project Plans and Policies for a fast-paced brownfield project.
• Help with lab system validation, develop and oversea system qualification
• Review and Approve C&Q plans/protocols/reports and GxP SOPs/records
• Review validation life-cycle documents during the commissioning, qualification (IQ/OQ), and validation (PQ) phase e.g., pre and post-execution commissioning/ qualification plans and test specifications, validation summary reports & etc.
• Ensure that documents are in compliance with quality standards and applicable regulatory requirements
• Review engineering change control to evaluate the validation/quality impact(s).
• Support in the resolution of validation deviations and approval.
• Participate in the qualification coordination meeting to ensure correct event sequence in compliance

If you'd like to find out about this opportunity, please forward your CV to Nelson Anthony ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

• Track conformity certificates, calibration certificates, and plant calibration certificates from external agencies while maintaining the RIN Register and coordinating with QPS for closure.
• Ensure full compliance of all sub-contractors with the relevant LTA M&W requirements and preparing and submitting weekly and monthly quality reports.
• Oversee QPS inspections and key activities while ensuring presence during asphalt works for road diversions.
• Review shop drawings, coordinating design issues, inspecting new and in-use molds, and managing material orders.

Requirements:

• Degree in Civil Engineering/ Mechanical Engineering or equivalent.
• At least 3 years of experience in doing QA/QC for LTA projects.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description

• To perform visual and dimensional inspections of products.
• Prepare of QC reports.
• Able to use basic measuring equipment/instrument such as Vernier Caliper, Micrometer, Thread Gauge, Pin Gauge.
• Required to work rotating night shift with night shift allowance provided

Pre-Requisites

• Min NTC / GCE ‘O’ Level / GCE ‘N’ Level
• Entry level candidates are welcome to apply.
• Able to interpret basic mechanical drawing.
• Proficient with Microsoft Excel.
• Ability to work independently or as part of a team.
• Able to communicate in simple English.
• 5.5 work day work week with overtime provided

Job Description

• Understand and upkeep the SOP of cleaning operation
• Record and report Issues to Resident Manager and Operation team
• Identify service gap and inform the Resident Manager and Operation team
• Support Process Improvements
• Identify scope for retraining
• Investigating customer complaints regarding service gap

Job specification

• Min Diploma holder & above. Fresh graduate is welcome to apply
• Bilingual preferred
• MS Excel, Word & Powerpoint skill ready

• Track conformity certificates, calibration certificates, and plant calibration certificates from external agencies while maintaining the RIN Register and coordinating with QPS for closure.
• Ensure full compliance of all sub-contractors with the relevant LTA M&W requirements and preparing and submitting weekly and monthly quality reports.
• Oversee QPS inspections and key activities while ensuring presence during asphalt works for road diversions.
• Review shop drawings, coordinating design issues, inspecting new and in-use molds, and managing material orders.

Requirements:

• Degree in Civil Engineering/ Mechanical Engineering or equivalent.
• At least 3 years of experience in doing QA/QC for LTA projects.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

QC Lab Validation Engineer (Pharma/ GxP/ Systems)

12 Months Contract

Location: Tuas

Up to $8,000 depending on experience

Industry: Pharmaceutical

Our client aims at creating a new manufacturing concept consisting of a new generation of evolutive multi-product facilities, modular, adaptable, and agile, leveraging new disruptive technologies, to better address vaccine business challenges.

Responsibilities:

• Support the implementation and maintenance of QC GxP Systems in compliance with Sanofi Standards and Regulatory guidance, which includes:
• Write and/ or execute IQ and OQ test protocols for QC Laboratory Computerized systems/ electronic equipment, including writing of exception reports.
• Author Qualification Summary Report for QC Equipment.
• Author QC Systems associated procedures such as administrative SOPs and configuration specifications, as required.
• Provide user administration support to laboratory system, support user requests including troubleshooting and problem solving, as required.
• Partner with QC to conduct data integrity risk assessment.

Requirements:

• Bachelor’s or Master’s Degree in Pharmaceutical Sciences, related life Sciences or IT/ Technology with minimally 5-7 years of experience in QC and equipment validation.
• Good understanding of 21 CFR Part 11 and data integrity requirements.
• Experience in leading project to roll out GxP systems.
• Experience in writing and executing QC equipment test scripts.
• Subject Matter Expert in GxP applications and systems.

Lim Pey Chyi - [email protected]

Recruitment Consultant (R2090579)

Manpower Staffing Services (S) Pte Ltd

EA Licence: 02C3423

Roles & Responsibilities

• Plan, coordinate, and execute quality assurance and control activities for projects, ensuring compliance with contract specifications.
• Ensure quality assurance and control across projects
• Maintain regulatory compliance and safety standards
• Liaise with suppliers and subcontractors to ensure quality control and adherence to standards.
• Facilitate off-site inspections, sampling, and testing of materials.
• Compile QA/QC record for submission to Client

Requirements

• Diploma in Civil Engineering or its equivalent
• StEr will be great advantage
• At least 4-year related working experience
• Welding inspection certificate (CSWIP 3.1) is an advantage
• Able to work in a team

Our Client is a Singapore based company in Medical Devices. Due to business needs, they are now recruiting a QC Supervisor to be part of their Quality team for ongoing transformation projects. They are located at West.

Duties:

• Guide and coach lab technicians.
• Inspect raw materials and conduct analyses on WIP and finished product samples.
• Support QA in failure analysis, corrective actions, and customer complaints.
• Assist with GMP audits, validations, and maintaining quality and technical files.
• Prepare technical reports, standards, and specifications for processes and products.

Requirements

• Minimum Diploma in Chemical/ Biotechnology or related field
• Possess supervisory experience in leading a team of technicians

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our Client is a Singapore based company in Medical Devices. Due to business needs, they are now recruiting a QC Supervisor to be part of their Quality team for ongoing transformation projects. They are located at West.

Duties:

• Guide and coach lab technicians.
• Inspect raw materials and conduct analyses on WIP and finished product samples.
• Support QA in failure analysis, corrective actions, and customer complaints.
• Assist with GMP audits, validations, and maintaining quality and technical files.
• Prepare technical reports, standards, and specifications for processes and products.

Requirements

• Minimum Diploma in Chemical/ Biotechnology or related field
• Possess supervisory experience in leading a team of technicians

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Industry/ Organization Type: Food Manufacturing/ Production
• Position Title: QC Lab Assistant/ QC Lab Technician
• Working Location: Tuas (Transport provided)
• Working Hours: Monday to Friday, 8 am – 5 pm
• Salary Package: Up to $2,500 + Allowances + Bonus
• Duration: Permanent

Key Responsibilities

• Conduct sensory evaluations, along with chemical and microbiological tests, on both products and raw materials.
• Understand and implement sampling plans, conducting sampling of raw materials and products as required.
• Prepare laboratory culture media and reagents as needed.
• Prepare product samples upon customer request or for internal/external laboratory testing.
• Accurately document all necessary information on the provided inspection forms and master list.
• Maintain cleanliness and organization of the laboratory and its equipment.
• Notify the QC Head of Department (HOD) about lab inventory levels to ensure timely procurement of necessary items and equipment for analysis.
• Report any non-conformities in raw materials and products to the HOD.
• Store retained raw material samples according to production dates for future reference in case of customer quality disputes.
• Participate in company-wide activities and tasks as required.

APPLY NOW!!!

• Minimum GCE "O" Level with passes in Chemistry and Biology
• At least 1 year of related working experience in laboratory work is preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68915 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing/Food Production
• Position Title: QC Assistant
• Working Location: Jurong West
• Working Hours: 5 days, Mon - Fri (8 am – 5.00 pm)
• Salary Package: Up to $2000 + Variable Bonus + $90 (Transport Allowance)
• Duration: Permanent Role

Key Responsibilities

• To conduct Microbiological tests and Chemical & physical testing.
• To do online checking.
• To operate the laboratory analysis instrument.
• Doing hygiene inspections.
• Report preparation.
• Any other ad hoc duties assigned.

APPLY NOW!!!

• Diploma/ITE in Chemical Process Technology/Food Science/Microbiology or equivalent.
• Proficient in Microsoft Office.
• Willing to work OT and late shift when required.
• Candidates without relevant experience are welcome to apply. Training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #64835 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Salary: Up to $3500

Benefits: Quarterly Bonus

Working days: Mon - Fri, 7.45 am - 4.45pm

Location: Tuas (walking distance from MRT)

Responsibilities:

• Provide guidance and coaching to lab technicians.
• Inspect incoming raw materials for compliance.
• Conduct periodic checks and analysis of work-in-progress (WIP).
• Conduct checks and analysis of finished product samples.
• Assist QA with failure analysis, corrective/preventive actions, and customer complaint response.
• Assist with GMP audits, validation, qualification, and change control.
• Maintain product quality and technical files.
• Write technical papers, reports, standards, and specifications.

Requirements:

• Min. Diploma in Chemical Process Technology, Pharm, Biotechnology
• Min. of 1 supervisory experience in production.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.]

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Hui Yew Cheong

Registration Number: R24124511

EA License No: 06C2859 (MCI Career Services Pte Ltd)

Job Description

• Industry/ Organization Type: Food Manufacturing
• Position Title: QC Assistant/ Executive
• Working Location: Woodlands (Nearest MRT: Admiralty)
• Working Hours: Monday to Friday, 8.30am – 5.30pm
• Salary Package: Up to $2,900 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Plant hygiene control & factory checking.
• To perform QC check such as microbial check, sensory, & visual checks on raw materials and all finished products produced by the seasoning manufacturing line.
• To do in-house verification/ calibration on the equipment.
• To maintain QC laboratories.
• Any other work as shall be assigned by the Company from time to time.

APPLY NOW!!!

• At least Diploma with Food Science or related discipline.
• Preferably with 1 year of related working experience.
• Able to start immediately or in short notice.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71209 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Our Client is a Singapore based company in Medical Devices. Due to business needs, they are now recruiting a QC Supervisor to be part of their Quality team for ongoing transformation projects. They are located at West.

Duties:

• Guide and coach lab technicians.
• Inspect raw materials and conduct analyses on WIP and finished product samples.
• Support QA in failure analysis, corrective actions, and customer complaints.
• Assist with GMP audits, validations, and maintaining quality and technical files.
• Prepare technical reports, standards, and specifications for processes and products.

Requirements

• Minimum Diploma in Chemical/ Biotechnology or related field
• Possess supervisory experience in leading a team of technicians

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Industry/ Organization Type: Food Manufacturing
• Position Title: QC Assistant/ Executive
• Working Location: Woodlands (Nearest MRT: Admiralty)
• Working Hours: Monday to Friday, 8.30am – 5.30pm
• Salary Package: Up to $2,900 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Plant hygiene control & factory checking.
• To perform QC check such as microbial check, sensory, & visual checks on raw materials and all finished products produced by the seasoning manufacturing line.
• To do in-house verification/ calibration on the equipment.
• To maintain QC laboratories.
• Any other work as shall be assigned by the Company from time to time.

APPLY NOW!!!

• At least Diploma with Food Science or related discipline.
• Preferably with 1 year of related working experience.
• Able to start immediately or in short notice.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71209 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Food Manufacturing/ Production
• Position Title: QC Lab Assistant/ QC Lab Technician
• Working Location: Tuas (Transport provided)
• Working Hours: Monday to Friday, 8 am – 5 pm
• Salary Package: Up to $2,500 + Allowances + Bonus
• Duration: Permanent

Key Responsibilities

• Conduct sensory evaluations, along with chemical and microbiological tests, on both products and raw materials.
• Understand and implement sampling plans, conducting sampling of raw materials and products as required.
• Prepare laboratory culture media and reagents as needed.
• Prepare product samples upon customer request or for internal/external laboratory testing.
• Accurately document all necessary information on the provided inspection forms and master list.
• Maintain cleanliness and organization of the laboratory and its equipment.
• Notify the QC Head of Department (HOD) about lab inventory levels to ensure timely procurement of necessary items and equipment for analysis.
• Report any non-conformities in raw materials and products to the HOD.
• Store retained raw material samples according to production dates for future reference in case of customer quality disputes.
• Participate in company-wide activities and tasks as required.

APPLY NOW!!!

• Minimum GCE "O" Level with passes in Chemistry and Biology
• At least 1 year of related working experience in laboratory work is preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68915 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641