T&C Engineer/

Senior Commissioning Engineer

The T&C Engineer/Commissioning Engineer is responsible for managing all testing and documentation for the project, ensuring quality delivery, and coordinating handover to the client and internal service department.

Key Responsibilities:

• Project Management:Manage all testing processes and documentation for the project.
  Ensure quality delivery from project installations and coordinate handovers.
  
• Design Review:Review project designs to ensure operational feasibility.
  Verify and evaluate the quality and performance of equipment/systems according to specifications before delivery to the client.
  
• Early Project Involvement:Engage in the early stages of projects to understand construction and Testing & Commissioning (T&C) requirements.
  
• Compliance:Ensure compliance with standards and engineering practices throughout the project.
  Understand built plans (M&E), technical literature, and equipment manuals.
  
• Troubleshooting:Conduct equipment troubleshooting, root cause analysis, and propose solutions.
  
• Reporting:Report work issues and non-compliances to the Project Management Office (PMO).
  
• Testing Activities:Conduct Site Acceptance Tests (SAT), Integrated System Tests (IST), Testing and Commissioning (T&C), and User Acceptance Testing (UAT).
  Support the project team with any technical issues related to testing procedures.
  
• Coordination:Work closely with the engineering team to understand design specifications.
  Prepare T&C test sheets and documentation prior to inspections.
  Schedule and coordinate all T&C activities, including attending equipment SAT testing and submitting site inspection reports.
  Liaise with project T&C consultants on all matters and ensure reports are compiled and submitted after each inspection.
  
• Documentation:Compile, review, and submit all T&C Method of Statements (MOS) for consultant review and approval.
  
• Additional Duties:Perform any other duties assigned by the PMO.
  

Special Instructions:

• This role is primarily electrical-based.

Job Responsibilities:

• Handling MEMS modules development related project independently.
• Host regular PRS review meeting with project owners of TD integration and Fab module engineers.
• Provide robust recipe to TD PI for new process developing
• Co work with fab module engineers to provide solutions for projects
• Provide risk assessments for new developing projects.
• Continuous improvement

Job Requirements:

• Bachelor degree in any Engineering discipline
• At least 3 years' experience from Etch/Diffusion/Thin Film/Photo process engineer
• Integration experience is a plus
• Capable of using DPE, 7 QC tools, FMEA, SPC, 3L5W, 8D

Job Description:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices
• Monitor critical SPC charts daily. Perform process window study and provide improvement plan to reduce OOC and improve CPK
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on passdown to troubleshoot process issues. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline. Work closely with the Equipment Engineer on new equipment acceptance. Know the concept of repeatability and reproducibility (R&R) run.
• Work on reducing process constraint so that Mfg can have more flexibility.
• Perform process matching between equipments to reduce variation and analysis / DOE to find factors for better tool matching.
• Participate in CIP programs to optimize process window, cost, yield, and productivity.
• Work as a team with both Equipment and Mfg Engineers to meet Module objectives. Work to meet the key indices of Uptime and OEE goals.
• Represent own Module to attend cross-functional task team to address yield improvement/ excursion issues. Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications/ documentation to meet TS16949 Quality Standard requirements.
• Follow good housekeeping and safety rules in office and FAB.
• Provide coaching, guidance, feedback and training to AEs or Techs on their troubleshooting skills, understanding of processes, decision making, risk assessment.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics
• Min 3 years of relevant work experience in Etch Process or BEOL
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Responsibilities:

• Quality Planning & Documentation: Develop, implement, and maintain a project-specific Quality Assurance (QA) and Quality Control (QC) plan that aligns with BCA CONQUAS standards, ensuring all quality processes meet assessment criterias
• Oversee the inspection and testing of materials used on-site, ensuring conformity with BCA-approved materials and standards under CONQUAS. This includes managing third-party testing agencies when required.
• Conduct frequent site inspections and audits focused on CONQUAS criteria, including workmanship, material application, and defect minimization in structural, architectural, and M&E works.
• Identify, document, and address non-conformances, particularly those impacting CONQUAS scoring. Recommend corrective actions, ensuring rectifications align with quality standards to avoid future issues.
• Work closely with site engineers and supervisors to ensure construction methods comply with CONQUAS specifications, providing guidance on quality protocols and rectifications as needed.
• Monitor construction activities to meet CONQUAS requirements, ensuring each component (structural, architectural, and M&E works) adheres to the system’s quality benchmarks and detailed criteria.
• Act as the primary quality liaison with clients and consultants, updating them on QA/QC matters and addressing quality concerns directly related to CONQUAS scoring.
• Prepare quality and assessment reports, including checklists and summaries that reflect compliance with CONQUAS scoring standards, inspection records, and non-conformance resolutions.
• Maintain comprehensive QA/QC records, including BCA CONQUAS documentation, material certificates, inspection logs, and testing results.
• In-depth knowledge of BCA’s CONQUAS standards, especially in structural, architectural, and M&E works criteria, assessment scoring, and inspection guidelines
• Train the construction team on CONQUAS requirements, quality assessment protocols, and best practices to enhance work quality and scoring.
• Promote continuous quality improvement initiatives that reflect CONQUAS requirements, addressing observed quality gaps with updates to procedures.

Requirements:

• Diploma/ bachelor’s degree in civil engineering, construction management, or related field
• 3-5 years of experience in a QA/QC role within the construction industry, with added experience in managing Quality Marks assessment processes or certifications a significant advantage

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

Responsibilities:

• Develop and maintain project schedules in consultation with the project team
• Coordinate and obtain inputs from project team, contractors and suppliers to support the development of project programmes
• Prepare baseline schedule which includes resources, cost loadings, S-curves, Programme Narratives, and scope appreciation presentation
• Work on progress forecast and prepare rolling programmes
• Update, track and report project progress against planned schedule
• Monitor and control progress to make sure that turnover and cost is in line with master construction program
• Ensure timely submission of materials with approvals
• Ensure project orders and deliveries are in accordance to agreed schedules
• Assist in the overall interfacing and coordination works as and when required

Requirements

• Degree in Civil / Structural Engineering recognized by Professional Engineers Board (PEB) Singapore or Building and Construction Authority (BCA)
• Good understanding of construction industry practices and standards to perform planning and scheduling
• Experience in LTA programme preparation, programme requirements and submissions
• At least 3 years’ experience in large scale projects with hands on experience doing planning and scheduling for civil and building projects
• Candidate with more experience will be considered for a senior role
• Proficient in planning software such as Primavera P6 and Microsoft Project
• Candidate with 4D BIM knowledge will have an added advantage
• Highly motivated, self-driven with initiatives to work independently to produce programmes, narrative and histograms
• Meticulous, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment

Information provided in response to this job advertisement will be treated in strict confidence and be used for recruitment purpose only.

• Responsible for QC inspection of electronic parts, PCB, PCBA, cable, assembly, mechanical parts and finished goods.
• Prepare inspection reports for accepted parts and produce discrepancy reports for rejected parts.
• Ensure that the product meets specifications in terms of its appearance and its functions.
• Use various inspection techniques and methods such as visual inspections, measurements and functional testing to determine product quality standards.

Requirements:

• GCE N level or equivalent
• At least 2 years of QC experience
• Good knowledge in mechanical parts, PCB, PCBA, cable assemblies and electronics components.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Responsibilities:

• Supports team task to support laboratory operation and infrastructure in the areas of examples: Equipment, Data Systems, Method) needs
• Participates in the management of laboratory equipment and computerized systems in QC laboratory to ensure business continuity and system data maintenance e.g., Empower, LIMS, SAP and equipment maintenance/calibration is in a state of compliance
• Participates in method technology transfer and laboratory equipment technological refresh/introduction activities into QC Laboratory within project timeline
• Participates in QC laboratory long range planning to ensure laboratory infrastructure needs is secured and Data integrity plan is in place to support business and laboratory compliance
• Author and execute qualification and equipment qualification documentation / method transfer (E.g.: Reports, Protocol, change control, related quality documents or procedures) are in cGMP compliance to corporate/site or regulatory requirements
• Supports and ensure timely escalation/handling of lab events or related quality actions. (E.g.: NCR, Lab Investigation, CAPA)
• Supports preparation and participate in internal/external audit, audit responses, to enable a successful audit outcome
• Participate in EHS, Business Compliance, cGMP and all other compliance-related matters, where applicable. Lead/supports CI initiatives to enable laboratory performance metrics
• Carry out any other task as assigned by Line manager

About You:

• University Degree in Science related discipline (E.g.: Chemistry, biology, pharmaceutical sciences, or equivalent experiences)
• Minimum 1 - 3 years of pharmaceutical experience in a Quality Control Function
• Experienced in Regulatory/ Pharmaceutical requirements
• Analytical thinking with basic problem solving and writing skills
• Motivated and independent
• Basic GMP knowledge/Experience on QC Lab Equipment and Method transfer
• Good communication skills and Strong ability to work cross functional teams
• Ability to work towards timeline
• Based in Tuas

Job Type: Contract

Contract length: 12 months. Option to extend/convert subject to performance review.

Job Description

• Position: QA/QC Assistant
• Singapore's leading seafood processors, exporters and distributors
• Working hours: 5.5 days (Monday to Friday, 8am – 5.30pm; Saturday 8am – 12noon)
• Salary (commensurate with experience): up to $2,500 basic salary + yearly performance bonus
• Working Location: Jurong
• Meal Provided
• Outpatient Medical & Dental Benefits Provided
• Duration: Permanent
• Industry: Processing and preserving of seafood

Main Responsibilities:

• Responsible for day-to-day inspection of in-process and finished products.
• Conduct daily hygiene inspection of process workers, process rooms and related areas to ensure it meets required standards.
• Ensure proper records of product and hygiene inspections.
• Responsible for reporting any non-conformance of products/process/ hygiene violation in timely manner.
• Assist in guiding production leaders/operators in implementing corrective actions and continuous improvement in production area.
• Assist in product development and ensure proper maintenance of all data, documents and records relating to product development.
• Assist QA Executive in implementation/ maintenance of SFA, Halal, ISO22000 & HACCP certifications.
• Assist QA Executive for Quality-related matters.

Requirements:

• Minimum Diploma in Food Science/microbiology.
• Preferably at least 1 year experience as QC in Food Manufacturing industry.
• Understanding of ISO 22000/ HACCP/GMP/ Halal requirements is advantageous.
• Meticulous, positive working attitude, able to cooperate/ communicate with all level of employee.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

Salary: up to $2600
Working Days & Hours: Mon-fri office hrs

Location: Boon Lay

Job Description:
Perform inspections on raw materials, intermediates and finished products by conduct sensory evaluation, carry out physical, analytical tests to ensure compliance with specifications and standards.

• Perform basic checks, calibration and maintenance of test equipment to ensure that test results are accurate.
• Assist and support in non-conformance and investigations of customers’ complaint samples or rejected items (Internal & External).
• Issue various documents (TDS, COA) internally (e.g. inter-department, affiliates) or externally (e.g by customers).
• Responsible for data entry, clerical and admin support.
• Maintain housekeeping of QC laboratory to ensure a clean and safe working environment.
• Assist and support in the implementation of continuous improvements in QA/QC functions.
• Carry out ad-hoc duties as assigned, when and where necessary.

Job Requirements: Min Diploma in Life Sciences or similar

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

• Monitor Product Quality Compliance
• Perform routine and non-standard tests on materials, products and other Quality Control purposes using HPLC, GC, Empower system etc
• Identify OOS, deviations and quality problems
• Report testing activities and results
• Comply with Quality and HSE procedures when carrying out sampling and QC tests
• Manage Laboratory Operations
• Follow the organization’s operational excellence model for laboratory work
• Perform routine calibration and maintenance of laboratory equipment
• Report equipment OOS issues and equipment purchase requests
• Maintain integrity, accuracy and completeness of QC data and records
• Optimise quality and efficiency of department workflows and activities
• Assist in preparing and participate for laboratory inspections and audits
• Compile data to support business and performance metrics reporting
• Propose solutions to improve QC procedures, activities and workflows

Requirements

• Min NITEC / Diploma in chemistry / chemical engineering / Chemical process Tech
• Min 1 year of HPLC lab working experience

Mon to Sun - Any 5 days. 2 rotating shifts

Based at Tuas - bus pickups - Jurong East, Outram, CCK, Woodlands

Pharma MNC

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

• Well Established Company
• Basic $3000 - $3500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 6.30pm

Job Responsibilities:

• Lead and supervise a team of QC inspectors to ensure daily inspection activities comply with established standards.
• Provide training, coaching, and mentoring to enhance team members' skills and performance.
• Develop and maintain work schedules for the department to optimize resource allocation and efficiency.
• Collaborate with cross-functional teams to drive continuous improvement, track non-conformities, and assess CAPA effectiveness.
• Review and approve Device History Records (DHR). Ensure quality records and samples are retained in accordance with Good Documentation Practices (GDP).
• Implement changes to quality documentation, such as QC procedures, process workflows, and work instructions, and guide the team through these changes.
• Review and submit validation or verification measurement reports.
• Perform daily process audits to ensure compliance with quality operational requirements.
• Ensure proper product identification and traceability.
• As the calibration administrator, ensure all equipment is properly calibrated and provides accurate measurements with appropriate identification.
• Assist with customer complaint analysis, investigate quality issues, and implement corrective actions.
• Authorize product release (Certificate of Conformance), and review and approve Certificates of Analysis (COA).
• Adhere to safety protocols and implement preventive measures to maintain a safe working environment.
• Monitor and report on key performance indicators (KPIs) for QC team performance, production quality trends, and quality control charts.
• Perform any other tasks as assigned by management.

Job Requirements:

• Possess minimum professional certification / Diploma / Degree in relevant subject area
• Working knowledge on ISO13485:2016 and quality assurance / quality control of medical devices is an added advantage
• Familiar with use of various quality control tools and test equipment

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG JYA YEE (R23119014)

EA Recruitment Pte Ltd

EA License No: 21C0492

Administered by the Workforce Advancement Federation (WAF), the Career Conversion Programme (CCP) for Biomedical Manufacturing Executives is a premier talent development initiative designed to cultivate the next generation of skilled professionals for Singapore’s Biomedical manufacturing industry. This comprehensive 15-month programme features structured on-the-job training (OJT) provided at Novartis Singapore Pharmaceutical Manufacturing Pte Ltd (NSPM), facilitating the practical application of acquired knowledge and ensuring participants develop the essential competencies required for their roles.

Eligilibity for CCP:

• Singapore Citizen or Permanent Resident;

• Minimum 21 years old;

• Mid-Career Individual: Graduated, or completed National Service, whichever is later, for at least 2 years* prior at the point of application; or

• Fresh Graduate: Graduated, or completed National Service, whichever is later;

• Not in a similar job function prior to joining Career Conversion Programme (CCP);

• Have not attended the same programme – Career Conversion Programme (CCP) for Biomedical Manufacturing Executives / Professionals (Train-and-Place with Commitment to hire) – previously;

• Have not been funded under the same programme – Career Conversion Programme (CCP) for Biomedical Manufacturing Executives / Professionals (Train-and-Place with Commitment to hire) – previously.

• Should not be shareholders, immediate ex-employees of Novartis, or be related to shareholders of Novartis.

Successful candidates must be able to commence the program by March 2025.

Job Purpose

Support all activities in maintaining a QC IPCDS lab in BioPharmOps QC. Testing of in-process control & drug substance samples, to support production needs and document in accordance with written testing SOP’s and in accordance with local/ international regulations.

Key Responsibilities

• Maintain QC IPCDS laboratory in full cGMP-compliance.

• Track and execute individual training requirements to ensure completion on time including new methods and instrumentation.

• Ensure laboratory operations are in accordance to cGMP standards

• Perform raw material testing in accordance current testing monographs/SOPs and in accordance with local/ international regulations.

• Ensures that testing completed in a timely manner based on plan.

• Support laboratory routine operations such as inventory management and house-keepings.

• Support the optimization of work flows in the QC IPCDS Laboratory.

Requirements

• Minimum Diploma with 4 to 5 years relevant working experience in GMP-regulated industries in Quality Control. Fresh graduates are welcome to apply.

• New entrants to biopharmaceutical industry and should not be holding a bond obligation with any organisation

• Background knowledge on analysis such as HPLC, UV Spectrophotometer, pH/Conductivity meter, Total Organic Carbon (TOC),

• Preferrably a working knowledge of FDA and ex-USA regulatory requirements as well as industry quality management tools, standard, and quality systems.

Salary: up to $2400 + 400 transport allowance

Duration: 1 year contract

Working Days & Hours: five day week. 2 weeks of Morning followed by 1 week of afternoon

Location: Tuas - bus pickups - Jurong East, Outram, CCK, Woodlands

Job Description:

Monitor Product Quality Compliance

Perform routine and non-standard tests on materials, products and other Quality Control purposes using HPLC, GC, Empower system etc

• Identify OOS, deviations and quality problems

• Report testing activities and results

• Comply with Quality and HSE procedures when carrying out sampling and QC tests

Manage Laboratory Operations

• Follow the organization’s operational excellence model for laboratory work

• Perform routine calibration and maintenance of laboratory equipment

• Report equipment OOS issues and equipment purchase requests

• Maintain integrity, accuracy and completeness of QC data and records

Optimise quality and efficiency of department workflows and activities

• Assist in preparing and participate for laboratory inspections and audits

• Compile data to support business and performance metrics reporting

• Propose solutions to improve QC procedures, activities and workflows

• Gather information to support feasibility assessments of introducing new QC procedures, systems and equipment

Job Requirements: Min Diploma in Chemistry / Sciences or similar

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

• Monitor Product Quality Compliance
• Perform routine and non-standard tests on materials, products and other Quality Control purposes using HPLC, GC, Empower system etc
• Identify OOS, deviations and quality problems
• Report testing activities and results
• Comply with Quality and HSE procedures when carrying out sampling and QC tests
• Manage Laboratory Operations
• Follow the organization’s operational excellence model for laboratory work
• Perform routine calibration and maintenance of laboratory equipment
• Report equipment OOS issues and equipment purchase requests
• Maintain integrity, accuracy and completeness of QC data and records
• Optimise quality and efficiency of department workflows and activities
• Assist in preparing and participate for laboratory inspections and audits
• Compile data to support business and performance metrics reporting
• Propose solutions to improve QC procedures, activities and workflows

Requirements

• Min NITEC / Diploma in chemistry / chemical engineering / Chemical process Tech
• Min 1 year of HPLC lab working experience

Mon to Sun - Any 5 days. 2 rotating shifts

Based at Tuas - bus pickups - Jurong East, Outram, CCK, Woodlands

Pharma MNC

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

• Preferrably with experience in fire protection systems
• Drafting, drawings, Tender BQ
• Project management includes preparing, scheduling, coordinating, monitoring etc.
• Project administration, quotation, progress claim, PTW, SIC etc.
• Hardworking and independent, willing to learn
• Proficiency with MS Office & CAD
• Strong organizational and communication skills
• Strong ability to multitask
• Comfort working with multiple groups within business

• Managing the planning and design stages of construction projects.
• Contributing technical expertise to project drawings and designs.
• Performing cost calculations and preparing financial projections.
• Preparing work schedules in collaboration with the project manager.
• Liaising between contractors, subcontractors, vendors, and suppliers.
• Overseeing construction engineering processes.
• Performing regular tests on materials and procedures to ensure compliance with industry regulations.
• Ensuring that the construction project is completed on time and within budget.
• Documenting processes and keeping detailed construction logs.
• Presenting construction project progress updates to clients and senior managers.

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Jiangsu Miracle Logistics System Engineering Co., Ltd. is located in Wuxi, a famous city in regions south of the Yangtze River. Founded in 1984 and listed on the Shenzhen Stock Exchange in June 2004, it is the earliest listed company in the industry in China. Its technology and sales rank first in the industry in China.

Currently, we need to recruit college students majoring in chemical engineering, lithium batteries, materials, and energy, battery remanfacture.

Responsibilities:

1. To supervise and manage the functions of Repacking/Containment/ICW operations and Maintenance.
2. To monitor the safe process flow and backlog level of TIW waste.
3. Ensure all staff are well trained according to OJT programme and following the safe work procedures and SOPs.
4. To ensure the effectiveness and smoothness of coordination with operation and sales team and customer service maintaining high quality of services.
5. To monitor the outgoing containment purchase budget and encourage the recycling of used containment to save cost.
6. Daily and regular inspection of the operation processes and monitor the plant 5S and TPM activities, safety and discipline at works, machineries and equipment conditions.
7. Work with Lab chemists to evaluate and develop new treatment methods and handing procedures for new and unknown wastes, and review of operation costs and regular update to management.

Requirements:

• Degree in Chemical Engineering or Chemistry
• At least 2 year relevant experience

Remuneration:

• Basic salary: $3,400 – $3,800
• Company Transport / Transport Allowance $120 if candidate possess own transport
• Working Hours: Monday to Friday: 8am to 5pm
• AWS & VB
• Sign-on bonus

Responsibilities:

• The successful candidate for this role is expected to have a strong background in Regression and end-to-end Testing, with a deep understanding of JSON, API, and SQL. Familiarity with financial instruments and entities will be considered a plus.

• This role requires an individual who is a fast learner, able to quickly comprehend business requirements and translate them into effective test cases using our in-house automated regression tools.

Skillset (Must have)

• Proven experience as a Software Test Engineer or similar role.

• Proficient in JSON, API, and SQL.

• Experience in regression and end-to-end testing.

• Strong problem solving skill and attention to detail.

• Excellent communication skill.

• Ability to learn quickly and work in a fast-paced environment.

• Experience in writing clear, concise, and comprehensive test plans and test cases.

• Willingness to support BAU operations as needed.

Skillset (Good to have)

• Familiarity with financial instruments and entities.

• Experience with performance testing.

• Knowledge of Agile/Scrum development principles.

• Experience with automated testing tools.

• Understanding of coding and scripting for automation purposes.

• Knowledge of continuous integration and continuous delivery (CI/CD) processes.

• Familiarity with version control systems like Git.

• Knowledge of software QA methodologies, tools, and processes.

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

830am-6pm

Permanent, 5 days, Yishun

Our client

A MNC in airconditioning industry

Job scope

• First point of contact for new product (Chiller) before dispatching to customer site( (Testing)
• To handle commercial air cooled and water cooled chiller customer complaints
• Hands on technical fault rectification and preventive maintenance, testing n commissioning
• Involve in the entire product cycle from research n development to after sales service
• Documentation update and closing of service log.

Requirements:

Diploma in Mechanical Engineering

2 years of technical experience with knowledge in air-conditioning, chiller, ACMV or HVAC systems

Proficient with testing for new product implementation (NPI)

Added advantage

Class 3 driving license

District cooling project

Large commercial building project

Job Summary

The role involves offering overarching guidance to ensure the successful completion of a project while maintaining adherence to the quality standards established by the company. Responsibilities include, but are not limited to, identifying critical aspects of project execution and proactively addressing potential issues before they arise. Additionally, the position requires the verification and management of man-hour consumption across various disciplines throughout the project's duration.

Duties & Responsibilities

• Involvement in projects with budgets that start at $3 million and can exceed $20 million.

• Assist Senior Project Engineer to oversee the planning, scheduling, execution, and coordination of the technical aspects of projects.

• Facilitate collaboration between various disciplines, including procurement and construction teams.

• Coordinate cost estimation for Engineering, Procurement, and Construction (EPC) activities.

• Maintain regular communication with assigned project clients to facilitate their engagement throughout the implementation process.

• Participate in client meetings to address and resolve project-related issues effectively.

• Oversee project documentation and manage design changes.

• Ensure the seamless execution of projects in alignment with established strategies and objectives across all phases, including feasibility studies, front-end engineering design (FEED), detailed design, construction, commissioning, start-up, and project handover.

• Guarantee that projects adhere to safety, cost, schedule, and quality standards.

• Conduct comprehensive contract reviews, risk assessments, and develop contingency plans.

• Organize proposal and project task forces, as well as allocate staff effectively.

• Initiate kick-off meetings with clients and internal teams.

• Prepare and analyse the overall budget cost plan.

• Monitor and evaluate project operations and timelines.

• Act as the company representative in interactions with clients.

• Develop project specifications and establish systems or processes for effective project execution.

Key Requirements

• Bachelor’s degree in mechanical engineering or a related engineering discipline, with minimum of 3 to 5 years of experience

• Comprehensive understanding of various engineering disciplines, including Process Technical knowledge.

Knowledge & Skills

• Proficient in Basic Design and Piping and Instrumentation Diagrams (P&ID).

• Familiarity with project management fundamentals, front-end engineering FEED, and relevant planning and scheduling tools is preferred.

• Demonstrated success in EPC Project Management within the Oil & Gas and Petrochemical sectors.

• A team-oriented individual who excels in collaboration, showcasing strong communication and interpersonal abilities, alongside outstanding presentation, technical, analytical, and troubleshooting skills.

• Highly self-driven, with the capacity to proactively create plans and carry out tasks with professionalism, diligence, and efficiency, while adhering to established company protocols.

• Design, develop, test, and implement Tableau dashboards and visualizations
• Supporting Business dashboards, projects, and ad-hoc requests
• Manage portfolio of existing and future Tableau dashboards and deliverables (data preparation, security design, access management, data visualizations design, testing, optimization and automation, enhancement roadmap, portfolio catalog, development prioritization, user adoption and training)
• Lead the implementation of enhanced dashboard access and data sharing security framework for Business dashboards requirements
• Deliver meaningful insights, trends, and analysis across all Business areas using a variety of internal and external data sources
• Participate in gathering requirements and consulting with customers to understand business problems and find the best way to visualize outcomes
• Participate in cross-functional projects
• Translate analysis outcomes into compelling data visualizations that are intuitive and prompt insights and actions
• Use data to tell stories by creating visually appealing reports, Tableau dashboards, and presentations for our internal customers

Job requirement

• Bachelor Degree in Computer Science or Information technology
• Basic knowledge of products, services and channels in fin tech industry
• Strong background in database concept.
• Expert in Data Visualization tools (e.g. Tableau, QlikView, Power BI etc.)

Interested candidate please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform -

https://sg.go.persolkelly.com/job/details/10579

We regret to inform that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E
EA License No. 01C4394 • EA Registration No. R1105286 (Ngiam Xinyi)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.