JOB RESPONSIBILITY

• Find tender opportunities GeBIZE.

• Prepare Tender and submission.

• Familiar with reinstatement and maintenance work.

• Review and analysis of Tenders Drawings & Documentation.

• Preparing Tender submissions and reviewing Procurement & Reviewing of Contracts, and ensuring compliance.

• Reviewing and commercial management of all projects, to ensure accurate and reliable reporting.

• Review all incoming correspondence from Clients, Consultants & Design Team to identify contractually critical items and to initiate replies.

• Estimating a range of projects in a variety of sectors.

• Improve and implement best practice commercial processes and accurate budgeting.

• Maintain accurate records and provide necessary detailed backup to support commercial tracking and costing.

• On Site measurement of Electrical Services.

• Preparation of specialist sub-contract work packages.

• Preparing monthly Commercial Progress reports.

• Other ad-hoc duties assigned by Construction Manager.

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Period: 30-36 months
• Start from February 2025

Requirements:

• Min Diploma in Civil Engineering or equivalent
• At least 4 years of relevant experience in supervision of residential buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

• Marine & Offshore industry
• Basic $3000 - $4200
• 5 days (8.30am – 6.00pm)
• Location: West Area
• Transport provided from Jurong East, CCK, Serangoon, Bishan

Responsibilities

• Design control systems
• Preparation of drawings for customer approval
• Preparation of drawings/BCM for shop floor production
• Co-ordinating with clients, consultants and internal department.
• Drafting work with use of CAD system (AUTOCAD/SOLIDWORKS).

Qualifications

• Min Diploma/ Degree in Electrical with no working experience are also welcome.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Job Scope: To independently define concepts, critical deliverables, lead, plan, manage and control engineering deliverables required for the assigned small-middle scale projects effectively and to efficiently determine requisitions for packages for mechanical components and / or equipment, execute, deliver the packages on time in compliance with company specifications, procedures and to independently deal with all stakeholders and resolve all issues of the assigned packages, and provide guidance to the assigned team.

Responsibilities:

• Conversant with specifications and requirements for mechanical rotating equipment (such as Process gas Compressors, Screw compressor pakcages, Reciprocating compressors, Gas Turbines, Sea Water Injection Pumps, etc.,) and requirements of Industry Codes and Standards, Classification Society rules and all relevant Regulatory.
• Responsible for the design and selection of rotating equipment on EPC projects through the various engineering work phases (i.e. Feasibility / FEED studies, and detailed engineering for Offshore, FPSO Projects)
• Plans and directs technical specifications/standards and Requisitions for engineers. Ensures all technical requirements incorporated in engineering deliverables. Reviews them and validates with the Section head, Project Management Team and client.
• Independently evaluates the technical aspects of bids received from suppliers and concludes technical assessment. Generally, Lead Engineers are assigned with complex packages and / or high risk equipment.
• Assists in placing and executing the orders. After orders, independently reviews supplier documents (such as data sheets, drawings) for their completeness, accuracy and compliance. Being the focal point, liaises and coordinates with various stakesholders.
• Oversees the technical and administrative management of the project mechanical team and ensures quality/schedule of deliverables from the team.
• Provides technical/engineering support/visit and advice for quality work at supplier shop and Construction/Commissioning work at site.
• Independently resolves technical issues using expert knowledge and technical know-how that may arise during the execution of package engineering, fabrication and post delivery.
• Ensures business activities and decisions conform to the laws and regulations and demonstrates high standard of ethical behaviour.

Requirements:

• Bachelor Degree in Engineering
• Minimum 15 years relevant working experience in mechanical engineering in oil and gas sector, preferable experience in FPSO, offshore application
• Possess relevant experience working on EPC projects
• Shall be conversant with design standards and International Industry Codes such as ASME, API, etc.

Interested applicants are welcome to submit your MS Word resume to:

[email protected]

EA Personnel: R1109773

EA Licence: 07C3676

Job Descriptions

• To reach the departmental quality target.
• Work closely with the production team and supplier to investigate and troubleshoot for process related problem
• To initiate evaluation and improve the existing process
• Standardize work procedures and provide training to all technicians and operators
• Provide guidance and motivation to all team members
• To answer qualities complaints and any discrepancies that arise
• To prepare a plan for the subsequent quarter and review for MBO (Management by objective)
• To initiate continuous cost reduction activity

Job Requirements

• Bachelor's Degree in Chemical Engineering
• Proficiency in Microsoft Office
• Strong analytical skill problem-solving skills
• Ability to multitask
• Able to handle a few projects at the same time
• Prefer one with at least 5 years of relevant working experience

What you will do:

The Systems Applications Engineer, National Accounts will Provides sales support to the engineering and sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Oversee the application engineering team, providing configuration, enhancement, and support for technical documentation and presentations to clients.
• Customize and introduce new features to Metasys software and in-house developed applications based on end-user requirements.
• Design and construct new applications tailored to meet customer specifications and needs.
• Guide application engineers in writing and executing tests on complex programming, troubleshooting issues as they arise, and supporting product launches.
• Provide technical support and troubleshoot application issues while performing tests on complex programming and assisting in product launches.
• Assist the application manager in process improvements to enhance productivity and efficiency.
• Collaborate with system integrators (SI) to monitor their performance with quality assurance/quality control checks and ensure completion sign-off.
• Manage vendor relationships, including scoping application services and reviewing deliverables.
• Collaborate as part of a design, engineering, and operations team.
• Knowledge of ACMV and controls associated with Johnson Controls Metasys will be advantageous.
• Deliver customer support by responding to technical queries with detailed analyses of building management systems, tooling costs, and design/process improvements to meet all customer needs.
• Collaborate with engineering, sales, and operations teams to understand standard fabrication techniques, composite materials, and customer demands to develop design details.
• Create and present technical engineering information based on customer proposals, including 3D representations of products and tooling.
• Prepare cost estimates by analyzing blueprints, customer documents, and consulting with engineers and technical personnel.
• Conduct conceptual designs of composite components and assemblies to support proposals.
• Generate accurate CAD models of components and assemblies.
• Develop detailed bills of materials for proposals.

What we look for:

• Bachelor's Degree in Engineering with a minimum of 5 years of relevant experience in Access, Intrusion, and Video Management systems
• Demonstrate strong verbal and written communication skills, including the ability to efficiently articulate technical subject matter
• Good communication skills, with an ability to express and understand complex technical concepts.
• Experience of working with globally distributed teams & matrixed environment

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Working hours: Part-time

3~4 days 8hrs/day, 8:30am to 5:30pm

KEY RESPONSIBILITIES

This position involves a combination of technical expertise, project management, to support and drive sales. Acts as a crucial link between the technical and commercial aspects of projects, the Project Proposal Engineer ensures customer satisfaction and successful handover to the Project Execution team.

Key Responsibilities

Collaborative Sales Approach

 Partner closely with all stakeholders to serve customers effectively and meet team sales targets.

Proposal & Quotation Preparation

 Analyze requests for proposals to understand project scope, technical requirements and customer expectations.

 Identify potential risks and propose mitigation strategies in proposals.

Customer Engagement and Technical Assistance

 Handle inquiries via various communication channels, provide technical assistance and advice, follow up on quotations, negotiate terms, close orders, and maintain customer relationships.

Cross-Department Coordination

 Work with Sales teams, Service, Finance and Supply Chain departments to gather necessary input for quotations and proposals.

Additional Responsibilities

 Perform any other tasks required by the Company to support its business strategy.

KEY REQUIREMENTS

 Diploma or Degree in Control/Electrical/Mechanical Engineering or equivalent

 At least 3 years’ experience in Instrumentation and Automation/Control Engineering

 Relevant Technical knowledge (Would be an advantage)

 Systematic and meticulous

 Strong ability to work effectively within a team environment.

 Ability to handle multiple tasks simultaneously and prioritize effectively.

 Excellent communication skills, both written and verbal.

KEY COMPETENCIES

 Technical knowledge

 Effective communication and interpersonal skills

 Self-Motivated and Independent

Job Description & Requirements

• Construction planning and liaising with clients, suppliers, building and facility contractors;
• Coordination and liaison with subcontractors and authorities in relation to planning and programming matters for the various interface that exist on the project;
• Liaison with Construction Managers and site team to ensure interface issues are identified and dealt with in a timely manner;
• Coordinates and liaises with project team to update the Detailed Works Programme;
• Maintains company, Consultants and Vendors drawing progress with Document Controller;
• Prepares programme and other detailed information necessary for substantiating claims, change requests and provisions with regards to planning and programming to the commercial department;
• Submission of an optimum tender programme which can meet the client’s requirements/ provision of a workable and cost effective Baseline/Master Programme;
• Involvement in the development and control of Project Work Schedule, such as building works, M&E and Process Systems from concept design to construction/installation to testing and commissioning;

Requirements:

• Degree/Diploma in Engineering, Construction or related discipline
• Minimum 2 years relevant experience in the construction industry
• Experience in construction planning related to industrial building facility
• Understanding of Codes and Engineering Standards of International Clients
• Proficient in MS Office in particular Excel, Powerpoint and MS Project

Bayes provides career opportunities with reputable and progressive Employers and prioritizes the interests of all whom we represent. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

All personal data supplied will be treated in confidence, and as permitted by law. For further enquiries, please visit our website which shares our Privacy and Data Protection Policy.

Dickson KOH | Managing Partner
Head, Infrastructures Practice
EA Registration R1103367

Position: Electrical Engineer

• Working days & hours: Mon - Fri ; 815am - 530pm (OT is required)
• Location: Joo Koon (Transport from Lakeside / CCK / Joo Koon MRT)
• Salary: $3000 to $3500 + OT

Summary

• The engineer is responsible for supporting motor & generator services, transformer services and switchgear services.

Knowledge and Skill Requirements

• Diploma or Degree in Engineering with a minimum of 1 year relevant experience

Primary Responsibilities

• Take charge of maintenance, troubleshooting, repair, commissioning and replacement of machinery equipment and systems such as chillers, motors, switchgears, generators and transformers.
• Carry out testing for all types of protection and maintenance.
• Develop and maintain relations with supervisors, assistant supervisors and other department on engineering concerns.
• Identify and solve engineering problems as needed.
• Ensure works are done timely.
• Ensure all safety aspects of the team.
• Mentor and train up technicians.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

• World-leading provider of cargo and load handling equipment (MNC)
• Basic $4,000 - $6,000
• Allowances + OT payable
• Office location: Jurong East-International Business Park

Responsibilities

• Steel Work Supervision: Supervise structural steel repairs, including welding, fabrication, and modifications on RoRo vessels, container vessels, and bulk carriers, ensuring compliance with industry and safety standards.
• Maintenance: Perform preventative maintenance, corrective actions, and upgrades equipment, including RoRo ramps, doors, and hatches.
• Inspections: Conduct thorough inspections of steel structures and mechanical systems to ensure compliance with safety and quality standards.
• Project Management: Lead and manage subcontractors during larger steel repair projects, ensuring the work is completed on time and within budget.
• Customer Support: Establish and maintain excellent relationships with internal and external customers, providing technical support and feedback to the relevant teams.
• Safety Compliance: Adhere to all Quality, Health, Safety, and Environmental (QHSE) standards and site-specific safety protocols.

Requirements

• Min with technical qualification in steel fabrication, marine or other relevant engineering fields.
• Min 2-3 years working experience in supervising steelworks or marine industry.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

• Engineering, Health, and Protective Services

Responsibilities:

• Create project plans, timelines, and budgets, and coordinate with stakeholders to meet milestones.
• Oversee project implementation, ensuring it meets engineering standards and client requirements. Resolve any issues that arise.
• Collaborate with designers, contractors, and engineers to ensure smooth project execution and effective communication.
• Ensure quality control and compliance with industry regulations and safety standards.
• Identify process improvements and contribute to new engineering solutions.

Requirements:

• Bachelor’s degree or Diploma in Engineering (Mechanical, Civil, Electrical, or related field).
• 2 years of experience in project engineering or a similar role.
• Strong project management skills, proficiency with engineering software, and excellent communication skills.
• Ability to manage multiple projects at once.
• Proactive, detail-oriented, and able to work well under pressure. Passionate about innovation and continuous improvement.

EA Personnel Name: Lucas Chang
EA Personnel No: R1874043
EA License No: 18C9495

Our client provides advanced instruments and systems designed for high performance across various industries.

• Connect with prospective clients to provide tailored semiconductor solutions.
• Manage the entire sales process, from prospecting to after-sales support.
• Liaise with global teams and R&D to tailor solutions to customer needs.
• Drive growth by exploring industry trends and opportunities in the SEA market.
• Foster and sustain strong client partnerships.

Requirements:

• Degree in Materials Science or equivalent.
• At least 2 years of sales experience in the Metrology/Scientific Industry.
• Good understanding of semiconductor processes for laboratory equipment uses for failure analysis, quality control and metrology equipment for thin film.
• Excellent communication, negotiation, and customer relationship skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

The Role:

• Lead Engineer role for mechanical scope.

• Perform all engineering design assignment (Core: Pumps, Compressors, Blowers, Turbines, Machinery, Package Equipment. Option: Vessels, HVAC).

• Checker role for department rotating/package deliverables.

• Prepare specifications, data sheet, and inquiry documents.

• Perform all discipline engineering assignment and design work.

• Perform technical bid evaluation.

• Mechanical handling and movement study.

• Coordinate with disciplines for layout.

• Review of vendor documentation and vendor management.

• Provide technical requirements and assessment for inspection and QC-related matters.

• Participate in site surveys, HAZOPs, and various workshops.

• Participate in FATs, shop inspections and provide technical support during construction, pre-commissioning stage.

• Handle interface matters and coordinate with relevant parties.

• Must be ready to work at construction site and be ready for working overseas upon request.

• Other work-related requests from Department Manager/Supervisor.

The Requirements:

• Degree in Mechanical Engineering, with 12 to 15 years experience in the industry.

• Has onsite experience for field engineering, commissioning and troubleshooting.

• Familiar with Shell DEPs, Exxon GPs, Chevron CES and GMPs design is an added advantage.

• Familiar with and have experience with pumps, compressors blowers, turbines and other industrial package.

• Possess ability to interpret client requirement, identify deviations and coordinate for resolutions.

• Demonstrates the ability to verify own product for error free output and draft technical resolutions for issues, communicate interface matters timely to various discipline.

• Experience to lead an amalgamated team of engineers working in different locations.

• Competent in English language and proficient in MS Office programs.

• Competent in planning and coordination with relevant parties both internal and external.

To Apply:

Please send your latest CV in word file to [email protected]

Kindly indicate your availability, current and expected remuneration package.

We regret that only shortlisted candidates will be notified.

For more job opportunities, please visit our career page: http://quinnox-solutions.com/c...

Quinnox Solutions Pte Ltd (License Number: 06C3126)

Registered EA Personnel (Reg. No.R21103082)

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

What you'll do:

As an IT Engineer (e-FX) [Contract], you will play a pivotal role in developing and maintaining applications utilised by users in the Financial Market. Your daily responsibilities will encompass adhering to secure coding guidelines, rectifying bugs and defects in custom developed application software, implementing change requests, managing data inconsistencies, executing patches, and working directly with end users. You will also manage cloud capabilities including monitoring, software updating, and product line management. Your commitment to continuous learning and improvement will propel your success in this role.

• Adhere to best practice secure coding guidelines such as OWASP
• Rectify bugs, defects, and functional non-conformities in custom developed application software
• Implement change requests for small to medium functional modifications or enhancements to Legacy Applications
• Rectify new and existing errors and inconsistencies with data stored in underlying data repositories linked to Legacy Applications
• Execute patches and proactive remediation for Legacy Applications
• Work directly with end users to create effective solutions
• Manage cloud capabilities including monitoring, software updating, and product line management

What you bring:

The ideal candidate for this IT Engineer (e-FX) [Contract] role brings a wealth of experience from similar roles or environments. With a Bachelor's degree in Computer Science or equivalent, you have spent at least 3 years honing your skills in IT engineering. Your experience with Electronic FX platforms sets you apart, as does your understanding of trade analytics tools like KDB+ and Mosaic. Your expertise spans across various technologies within the IT operations landscape. You are known for your excellent analytical and problem-solving skills which enable you to thrive under pressure. Your strong communication skills allow you to work effectively both independently and within a team. An understanding of agile methodologies and IT Risk & Security concepts will be advantageous in this role.

• Bachelor's degree in Computer Science or equivalent
• 3+ years of experience in a similar role or environment
• Experience with working on Electronic FX platform with FX domain appreciation
• Beneficial to have experience in trade analytics (KDB+, Mosaic)
• Expertise in broad technologies in the IT operation landscape
• Excellent analytical and problem-solving skills with the ability to work under pressure
• Strong communication skills and ability to work both independently and within a team
• Understanding of agile methodologies
• Experience or affinity with IT Risk & Security concepts

What sets this company apart:

Our client is a leading player in the Financial Market sector, known for their commitment to innovation and excellence. They offer a dynamic and inclusive work environment that encourages continuous learning and improvement. Their focus on employee development and engagement sets them apart from other companies in the industry.

What's next:

Ready to elevate your career? Apply now!

Submit your application today by clicking on the provided link!

Do note that we will only be in touch if your application is shortlisted.
Robert Walters (Singapore) Pte Ltd
ROC No.: 199706961E | EA Licence No.: 03C5451
EA Registration No.: Bhargava Aviral R23112008

Key responsibilities:

• Provide IT support operation on daily basis, include below activities:

- IT asset management (include the hardware and software) – manage all company IT asset with proper traceability record;

- Support HR on all employee on-board/off-board process including IT training;

- Provide all IT system setup and admin work; (file control, VPN setup and special software admin work support);

- IT Level 1 helpdesk support to all company staff include remote user from worldwide, it could be PC issue, office printer, phone system or network related issues;

- Troubleshooting AD/DC, Exchange server, File Server and Application server issues and provide a solution.

- Troubleshoot and configure the firewall, router and switch when issues arises.

- Escalate to 3rd party IT support vendor if issue couldn’t be fixed within same day, coordinate with IT support vendor resolve issues within TAT, document down for all IT issues and solutions in return document;

- Liaise with IT vendor management, include IT hardware/software quotation, costing, PR process and make proposal if any recommend system tools).

• System maintenance work on regular basis, include below activities:

- All System backup (File server backup, NAS storage backup, offline backup activity), verify all system backup files are working properly;

- Coordinate department head on storage Clean up include File server, SharePoint and NetApp;

- Monitor Server room temperature and humidity, and make sure all server related equipment (E.g.: UPS) are working under good condition;

- Pulse check all on server, router and firewall log and flag out all abnormal activities immediately;

- Regular update antivirus related tools and window related system patches.

• IT governance and direction:

- Maintain all IT related record (contract, agreement, software authorization, etc.) and regularly updates or renew on time;

- Keep updating and release new IT P&P (Policy & Procedure), BCP(Business Continuity Plan) and DRP(Disaster Recovery Plan);

- Working with finance and country IT support on IT budgeting yearly basis and review it quarterly;

- Assist external or internal auditor on IT compliance or ISO related audit;

- Evaluate vendor proposal and provide justification to management.

• IT related projects management (Ad Hoc or on-going) and provide weekly basis updates to management):

- IT project plan, budgeting and proposal;

- IT project deployment after project approved;

- IT project verification and provide necessary training to end user;

- IT project sign off and documentation.

Additional responsibilities:

• Any reasonable task assigned by management and deemed to be within the individual’s capabilities to ensure smooth running of the business.
• As this is an evolving business, ongoing change is an integral part of the position. Management will liaise with the individual on any fundamental change to work practices. The individual is required to embrace and adopt any change to working practices.

Responsibilities

• To provide 24 x 7 support for Data Center running on 12 hours shift

• Assisting the Customer in the verification, isolation and/or provision of a temporary work around for the incident/problem logged

• Resolving the incident/problem onsite

• Escalating unsolvable problems and service requests to the System and/or Software Engineer and reporting the escalation to the Project Manager

• Generating the relevant administrative records and reports.

• Introducing and integrating new technologies into existing environments

• Applying operating system updates, patches, and configuration changes

• Adding, removing, or updating user account information, resetting passwords, etc.

• Answering technical queries

• Maintaining the configuration of the system

• To implement Service Request and Change Request

• Contacting OEM/Vendor for technical support

Requirements

• Degree/Diploma in Computer Science/Electronics/IT or equivalent

• Minimum 1 year of relevant working experience in IT infrastructure operation

• Preferably with Microsoft Certification and/or ITIL certification

• Good Knowledge of following products will be advantageous: Linux, Unix, Active Directory/DNS , Microsoft Azure Stack, Microsoft Windows 2008-2016, Commvault Backup and Recovery & Symantec Endpoint Protection

• 12 hrs shift working

Licence no: 12C6060

Job Description:

1. Implement and execute preventive and breakdown maintenance work for electrical and instrumentation related tasks with focus on safety.
2. Perform electrical and Instrumentation troubleshooting.
3. Able to work and trouble shoot with AC low voltage single phase and 3 phase systems.
4. Identify and maintain an optimum level of electrical spares and drives to reduce plant downtime, take drive parameters back up and need to maintain.
5. Ensure systematic documentation of Maintenance Procedures and Risk Assessments, SLD, E&I related and maintenance records for troubleshooting purpose.
6. Experience in 3 phase generator control interfacing to grid power.
7. Liaise with PE and organize preventive maintenance for MV and high voltage (22Kva).
8. Understand and develop electrical panel schematics if needed.
9. Guide technician on troubleshooting part if needed for ACMV, CCTV, Access control system, PA system, power and lighting.
10. Update and control of Electrical specification, procedure and drawings
11. Material Management including consumables, parts and spare unit
12. Responding to breakdowns, diagnosing faults, record and report.
13. Review and approve of service, repair and overhaul equipment, record and report.
14. Managing routine 5S at the maintenance workshop, store and work area at site.
15. Communicate with clients, consultants, project personnel and relevant authorities.

Job Requirements:

1. Degree in Electrical Engineering or Instrumentation / Maintenance Engineering.
2. At least 3 years of experience in electrical engineering in chemical, petrochemical, pharmaceutical and power plant operations.
3. Strong Electrical Knowledge.
4. Results oriented individual with robust technical abilities.Able to work independently and in a team.
5. Possession of LEW is an advantage.
6. Knowledge of preventative maintenance systems and their administration.
7. Knowledge of Maintenance and Asset Management is an advantage.

Others:

1. Working hours: Monday to Friday (8am to 5pm)
2. Company Transport / Transport Allowance $120 if candidate possess own vehicle to work
3. Sign-On Bonus

Job Description

• Industry/ Organization Type: Marine Equipment Wholesaler
• Position Title: Project Engineer (Marine Engineering)
• Working Location: Tuas West
• Working Hours: Monday – Friday, 9am – 5.30pm (One Saturday per month, 9am – 12pm)
• Salary Package: Up to $5,500 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assist the sales team in project execution.
• Coordinate and manage project documentation, liaising with customers and suppliers on project-related matters.
• Oversee internal and external coordination on issues related to quality, engineering, delivery, and commissioning.
• Perform additional duties as assigned by the manager.

APPLY NOW!!!

• Minimum Diploma in Mechanical/Electrical/Marine Engineering or equivalent with at least 2 years of experience in project management; experience in marine projects is a plus
• Willingness to travel as required.
• Proficiency in Microsoft Word, Excel, and PowerPoint.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70693 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Audio Visual (AV) Solutions Provider
• Position Title: Sales Engineer
• Working Location: Kallang
• Working Hours: 5 Days (Mon – Fri, 9am – 6pm)
• Salary Package: Basic Salary + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Drive sales performance to meet targets and maintain client relationships.
• Engage in B2B sales activities, identifying new opportunities and guiding them to closure.
• Collaborate with business partners and work with the internal AV Design Team to tailor solutions to client needs.
• Negotiate pricing with partners to ensure competitive bidding.
• Compile and deliver weekly sales reports (specific to Assistant Sales Manager role).
• Aid in managing relationships with manufacturers for audio and related solutions.
• Target primary markets within the hospitality and education sectors.
• Seek and establish partnerships for audio solutions to broaden offerings for existing clients.
• Focus solutions on Pro Audio Solutions for large venues such as theatres and auditoriums.

APPLY NOW!!!

• Minimum Diploma in any discipline.
• At least 1-2 years of relevant experience in the AV Industry.
• Proven sales experience in a B2B setting and project-based environment is preferred.
• Familiarity with Pro sound solutions for large venues, Audio & Visual, videoconferencing, and telephony solutions is an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70802 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Working hours: Part-time

3~4 days 8hrs/day, 8:30am to 5:30pm

KEY RESPONSIBILITIES

This position involves a combination of technical expertise, project management, to support and drive sales. Acts as a crucial link between the technical and commercial aspects of projects, the Project Proposal Engineer ensures customer satisfaction and successful handover to the Project Execution team.

Key Responsibilities

Collaborative Sales Approach

 Partner closely with all stakeholders to serve customers effectively and meet team sales targets.

Proposal & Quotation Preparation

 Analyze requests for proposals to understand project scope, technical requirements and customer expectations.

 Identify potential risks and propose mitigation strategies in proposals.

Customer Engagement and Technical Assistance

 Handle inquiries via various communication channels, provide technical assistance and advice, follow up on quotations, negotiate terms, close orders, and maintain customer relationships.

Cross-Department Coordination

 Work with Sales teams, Service, Finance and Supply Chain departments to gather necessary input for quotations and proposals.

Additional Responsibilities

 Perform any other tasks required by the Company to support its business strategy.

KEY REQUIREMENTS

 Diploma or Degree in Control/Electrical/Mechanical Engineering or equivalent

 At least 3 years’ experience in Instrumentation and Automation/Control Engineering

 Relevant Technical knowledge (Would be an advantage)

 Systematic and meticulous

 Strong ability to work effectively within a team environment.

 Ability to handle multiple tasks simultaneously and prioritize effectively.

 Excellent communication skills, both written and verbal.

KEY COMPETENCIES

 Technical knowledge

 Effective communication and interpersonal skills

 Self-Motivated and Independent

Test Engineer

Our reputable client is looking for a System Test Engineer Lead (Selenium) to handle test plan, design, planning and setting up Test Lab. The incumbent is required to lead Installation, checkout, integration and testing (ICIT) at customer’s sites.

Responsibilities:

• Involved in System Test Plan and System Engineering Design.
• Responsible for Planning and Setting up Test Lab and conduct Factory Acceptance Test.
• The ability to perform Troubleshooting and Resolving System Faults and Perform On-Site Acceptance Test.
• Involved in lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Requirements

• Strong in performing System Test and Design.
• Strong knowledge in handling Infocomm Technology, RedHat Linux, Virtual Environment, Network Security.
• Experience in handling System Test Plalnning and Troubleshooting.
• Minimum 5 years of System Test experience using Selenium.
• Experience in leading a Team of Engineers.
• Degree in Electrical & Electronics Engineering / Computer Science or equivalent
• Singaporeans Only.

We respect your privacy and all communication will be treated with confidentiality.

Please contact us or apply in-confidence to us with you updated MS Word Resume to : [email protected]

Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Project Engineer (Electrical & Electronic)

As a Project Engineer, your role will involve analysing project requirements, developing project plans, conducting feasibility studies, and coordinating project resources. You will also be responsible for monitoring project progress, identifying potential issues, and implementing corrective actions when necessary. Additionally, you will collaborate with external stakeholders, such as clients and contractors, to ensure effective communication and successful project outcomes.

To excel in this position, you must possess strong project management skills, technical expertise, and excellent problem-solving abilities. You should be able to work well under pressure and manage multiple projects simultaneously. Exceptional communication and interpersonal skills are also essential for effectively collaborating with various stakeholders.

Responsibilities

• Develop and implement project plans based on project scope and objectives
• Conduct feasibility studies and perform risk assessments to ensure project viability
• Coordinate and allocate project resources, including personnel, materials, and equipment
• Monitor project progress and ensure adherence to timelines, budget, and quality standards
• Collaborate with cross-functional teams to identify and resolve project issues
• Conduct regular project meetings to provide updates, discuss challenges, and make decisions
• Prepare and present project reports, including status updates and performance metrics
• Maintain effective communication with clients, contractors, and other external stakeholders

Requirement

• Candidate must possess a Bachelor's Degree in Engineering (Electronic & Electrical).
• Familiar and experience in ISO certifications and WSH.
• Excellent communication and interpersonal skills, both verbal and written in English.
• Good skills in using MS Office application, AUTOCAD and SolidWorks.
• At least 2 years of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or Mechanical equivalent.
• Experience in handling both consultants and clients will be added advantage
• Strong working knowledge of relevant codes of practice, building regulations, and authority submission and approval procedures.
• Proficiency in engineering design software and analysis tools.
• Excellent communication, collaboration, and interpersonal skills.
• Ability to manage multiple tasks effectively and prioritise deadlines.

Position: Project Engineer (Civil and Structural)

Responsibilities:

· To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.

· Prepare method statements, design plans, and specifications.

· Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.

· Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.

· Determine project requirements and estimate resources such as manpower, materials and equipment.

· Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.

· Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.

· Other job duties as assigned.

Requirements:

• Candidate must possess a Bachelor's Degree in Engineering (Civil and Structural).
• Familiar and experience in ISO certifications and WSH.
• Excellent communication and interpersonal skills, both verbal and written in English.
• Good skills in using MS Office application, AUTOCAD and SolidWorks.
• At least 2 years of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or Mechanical equivalent.
• Experience in handling both consultants and clients will be added advantage
• Strong working knowledge of relevant codes of practice, building regulations, and authority submission and approval procedures.
• Proficiency in engineering design software and analysis tools.
• Excellent communication, collaboration, and interpersonal skills.
• Ability to manage multiple tasks effectively and prioritise deadlines.