Key Responsibilities / Accountabilities

• Identify best practices and lead continuous improvement initiatives to reduce work process risks, raise safety awareness, and improve safe work practices
• Facilitate a work environment that supports a safe and healthy culture.
• Conduct or coordinate worker training in areas such as safety laws and regulations, hazardous condition monitoring, and use of safety equipment
• Conduct internal audits for ISO, EMS, OHSAS and Health& Safety audits and inspect facilities, machinery, and safety equipment to identify and correct potential hazards, and to ensure safety regulation compliance
• Investigate industrial accidents, near-miss incidents, and occupational injuries to determine causes, install preventive measures, and manage return-to-work activities
• You are required to report work-related accident to MOM and HR, follow up with MOM if there’s any investigation required or any further action
• Follow up medical report form to the hospital or clinic and completed medical report sent to MOM
• Provide technical advice, coaching, guidance, and mentoring to employees on safety initiatives and necessary changes
• Coordinate employee safety programs to determine their adequacy including review of short- and long-term strategic safety planning and development
• Take part and lead in the Risk Assessment development
• Order and maintain facility safety inventory including supplies and equipment
• Work within company policy as outlined in HR Policy Manual and OSHA Safety rules and regulations where applicable
• Coordinate and conduct management review for all the three compliance standards at predetermine frequency
• Focus on continual improvements to enhance further compliance standards performance

We are seeking an individual with QA/QC experience in the steel trade for the position of QA/QC Engineer for Fortis Construction Pte. Ltd. Singapore operations. The candidate will assist with the QA/QC program throughout the design and construction phase of the largest multistory data center in Asia (The Project).

Reporting to the QA/QC Manager, the candidate will be responsible for assuring the implementation and compliance with the Quality Assurance System and for scope of work related to the structural steel items. 

It is expected the candidate will be a very detailed and organized individual with extensive previous experience working as a QA/QC on large, international projects with deep knowledge of steel structural systems. There will be a significant amount of “hands on” work understanding and implementing the VDC QA/QC systems. The candidate must have excellent leadership and Emotional Quotient (EQ) skills and be able to relate to and communicate with the client, the Fortis Construction Pte. Ltd. team, subcontractors of all tiers, vendors and immediately establish trust and confidence in his/her ability.

The candidate will provide guidance to other team members they interact with and manage daily. The candidate will be expected to know the drawings and specifications and dig into the details to resolve issues.

Responsibilities:

• Contribute and share program evolutions and lessons learned with Fortis Construction, Inc. US operations QA/QC Managers
• Represent Fortis Construction Pte. Ltd. in the utmost professional manner while constantly embracing honesty, integrity, and truth
• Comply with Fortis Construction Pte. Ltd. anti-graft, non-bribery requirements
• Review approved steel drawings, and ensure compliance with the construction specifications
• Coordinate with Project Engineers for technical assistance, generating Root Cause Analysis (RCA) for Client-requested quality observations, and project closeout
• Work together with the contractors to properly document the quality process, tracking and final turnover
• Run the weekly QA/QC Meetings, drive open CSA quality issues to closure, keep meeting minutes and document for future reference together with subcontractors
• Play a proactive role with field inspections, together with the subcontractors and the Client in developing pre-test plans prior to contractual testing and stay ahead of normally scheduled inspections with the authorities having jurisdiction (AHJ). Assist the contractor in resolution of known issues and lessons learned from other sites
• Assist with onsite/remote BIM 360 Field training of new Trade Partners / site personnel (iPad and Desktop) and competency with BIM 360 Field to create issues, capture QA/QC related issues, and create checklists.
• Identify issue and close them prior to punch walk and area substantial turnover date, by working with Client and Trade Partner’s QA/QC team
• Establish a great relationship with the Client, Trade Partner and local AHJ
   

We are seeking an individual with QA/QC experience in the Design for Manufacturing and Assembly (DfMA) or Prefabricated Prefinished Volumetric Construction (PPVC) for the position of QA/QC Engineer for Fortis Construction Pte. Ltd. Singapore operations. The candidate will assist with the QA/QC program throughout the design and construction phase of the largest multistory data center in Asia (The Project).

Reporting to the QA/QC Manager, the candidate will be responsible for assuring the implementation and compliance with the Quality Assurance System and for scope of work related to DfMA/PPVC items. 

It is expected the candidate will be a very detailed and organized individual with extensive previous experience working as a QA/QC on large, international projects with deep knowledge of DfMA/PPVC methods. There will be a significant amount of “hands on” work understanding and implementing the VDC QA/QC systems. The candidate must have excellent leadership and Emotional Quotient (EQ) skills and be able to relate to and communicate with the client, the Fortis Construction Pte. Ltd. team, subcontractors of all tiers, vendors and immediately establish trust and confidence in his/her ability.

The candidate will provide guidance to other team members they interact with and manage daily. The candidate will be expected to know the drawings and specifications and dig into the details to resolve issues.

Responsibilities:

• Contribute and share program evolutions and lessons learned with Fortis Construction, Inc. US operations QA/QC Managers
• Represent Fortis Construction Pte. Ltd. in the utmost professional manner while constantly embracing honesty, integrity, and truth
• Comply with Fortis Construction Pte. Ltd. anti-graft, non-bribery requirements
• Review approved drawings, and ensure compliance with the construction specifications
• Coordinate with Project Engineers for technical assistance, generating Root Cause Analysis (RCA) for Client-requested quality observations, and project closeout
• Work together with the contractors and factories to properly document the quality process, tracking and final turnover
• Run the weekly QA/QC Meetings, drive open quality issues to closure, keep meeting minutes and document for future reference together with subcontractors
• Play a proactive role with field inspections, together with the subcontractors and the Client in developing pre-test plans prior to contractual testing and stay ahead of normally scheduled inspections with the authorities having jurisdiction (AHJ). Assist the contractor in resolution of known issues and lessons learned from other sites
• Assist with onsite/remote BIM 360 Field training of new Trade Partners / site personnel (iPad and Desktop) and competency with BIM 360 Field to create issues, capture QA/QC related issues, and create checklists.
• Identify issue and close them prior to punch walk and area substantial turnover date, by working with Client and Trade Partner’s QA/QC team
• Establish a great relationship with the Client, Trade Partner and local AHJ
   

Control Engineer

Main Responsibilities

• Responsible to assist in the design of controls system and programming to meet the budget and time expectations of the project.
• Able to Modify controls design and other documents according to the Standards and compliance to industry standards as according to project specification.
• Develop specific program per customer and project requirements.
• Knowledge in Allen Bradley, COMAP and Siemens-S7 programming.
• Knowledge in instruments, control valves and shutdown valves troubleshooting.
• Knowledge in various industrial communication protocols like MODBUS, Ethernet etc.
• Knowledge in control panel design as per project requirement.
• Participate in controls and validation activities, conduct test and debug, FAT and SAT.
• Work together with the Customer, Process engineer, Design Engineers and other project team members as required.
• Communication with Customer as per project requirements.
• Ability to communicate in an open, clear, precise and effective manner.

Requirements:

• Education: Bachelor’s degree/diploma in engineering or equivalent;
• Minimum 3 years of related work experience in oil and gas industry.
• Must be able to travel as requested.
• Must be available to work overtime.
• Ability to make sound decisions, work independently and within a team structure
• Ability to function in a fast-paced work environment.
• Well organized and respectful of project deadlines.
• Positive attitude.
• Target and result orientation.

Summary

Initiates the design, development, execution and implementation of technology research projects. Investigates the feasibility of applying scientific principles and concepts to potential inventions and products. Plans and executes applied research. Maintains substantial knowledge of state-of-the-art principles and theories and may contribute to scientific literature and conferences. May participate in development of patent applications. May coordinate interdepartmental activities and research efforts.

Key Accountabilities

• Evaluation of value engineering efforts on current products and achieving strategic quality goals following the launch of new developments (NPIs) and existing products.
• Work with the team to drive business stakeholders’ priorities participating in plans to successfully support all active products in the areas of cost reduction, supply chain support, and participate in design for in-sourcing projects. with key technologies.
• Provide evaluation results (verification and validation), to ensure proper performance, long-term stability, reliability, robustness, and customer-usability for Value Engineering projects on all PerkinElmer products (include Mass Spectroscopy, ICP OES and GC products).
• Log and track all defects, test results.

Requirements

• Bachelor of Science degree or equivalent required.
• 2-5 years analytical instrumentation experience.
• Statistical analysis capabilities a plus.
• Excellent verbal and written communication skills; requires interaction with managers, supervisors, engineers in a fast-paced environment.
• Demonstrated ability to succeed in a fast-paced environment, working on multiple projects with constantly changing priorities and deadlines.
• Self-starter with the ability to prioritize, multi-task, and take ownership of projects, performing job requirements with minimal oversight and attention to detail.
• Positive attitude, high energy and troubleshooting skills.
• Fully responsible for significant/challenging deliverables keeping management informed of progress and strategy.

Support our team in operational tasks

• Monthly Key Performance Index updating.
• OES & IAM complaint register updating & follow up.
• Support in maintaining related internal processes and systems.
• Support in Digitalization and Automation transformation activities.

Be in charge of your own projects

• Standardize data collection for specific Quality management aspects and prepare for further analysis.
• Work on new idea /concept on data and process automation.

Whether you’re at the start of your career or looking to discover your next adventure, your story begins here. At Citi, you’ll have the opportunity to expand your skills and make a difference at one of the world’s most global banks. We’re fully committed to supporting your growth and development from the start with extensive on-the-job training and exposure to senior leaders, as well as more traditional learning. You’ll also have the chance to give back and make a positive impact where we live and work through volunteerism.

Shape your Career with Citi

Citi’s Global Legal Affairs and Compliance (GLAC) empowers and protects Citi by providing legal, compliance, investigative, and security services to our firm.  We manage compliance risk, provide legal analysis and advice, protect Citi’s people and businesses, advocate for legal and regulatory outcomes that benefit our firm and our clients, and ultimately promote behavior that is consistent with Citi’s mission and culture.

We’re currently looking for a high caliber professional to join our team as Vice President, Business Risk & Control Officer- Global Assessment Unit coordination - Hybrid (Internal Job Title: Business Risk & Control Officer - C13) based in, Singapore.  Being part of our team means that we’ll provide you with the resources to meet your unique needs, empower you to make healthy decision and manage your financial well-being to help plan for your future.  For instance:

• We believe all parents deserve time to adjust to parenthood and bond with the newest members of their families. That’s why in early 2020 we began rolling out our expanded Paid Parental Leave Policy to include Citi employees around the world.
• We empower our employees to manage their financial well-being and help them plan for the future.
• We have a variety of programs that help employees balance their work and life, including generous paid time off packages.

The Business Risk and Control Officer is a strategic professional who stays abreast of developments within own field and contributes to directional strategy by considering their application in own job and the business. Recognized technical authority for an area within the business. Requires basic commercial awareness. There are typically multiple people within the business that provide the same level of subject matter expertise. Developed communication and diplomacy skills are required in order to guide, influence and convince others, in particular colleagues in other areas and occasional external customers. Significant impact on the area through complex deliverables. Provides advice and counsel related to the technology or operations of the business. Work impacts an entire area, which eventually affects the overall performance and effectiveness of the sub-function/job family.

The Business Risk and Control Officer will be a key member of the Legal Risk & Control Team supporting both the Legal Department and the Regulatory Strategy and Policy (RSP) team with focus on the Global Assessment Unit coordination role as well as supporting the implementation and execution of new BAU transformation processes to ensure appropriate adherence to firm-wide initiatives and requirements, including operational and compliance risk management programs.

In this role, you’re expected to:

• Help contribute to governance and the facilitation of the execution of the Manager Control Assessment (MCA, i.e.. Risk & Control Self-Assessment) as required by the MCA Standard including the assessment and appropriate approval of risk associated with business changes. 
• Support teams in the quality, completeness, and accuracy of the implementation of the Control Framework, including Risk Control Policy, Control Standard, Issue Management Policy, Lesson Learned Policy and Control Inventory.
• Help contribute to the Lessons Learned Policy, including monitoring of control breaches and dissemination and learnings across other business units for process improvement to limit the occurrence of similar future events and where similar risk exposure might exist.
• Support the review and challenge process, within Legal and RSP, on the effective design and management of controls to mitigate risks as required by the Control Standards, including implementation and operation, conducting the control monitoring, handling deficiencies, and escalating issues for resolution. 
• Help contribute to the timeliness, accuracy and completeness of the MCA through controls prior to the execution of a process (QC).
• Assist in the monitoring of the adherence to the MCA Standard through controls after the execution of a process (QA).
• Support in dealing with Operational and Compliance Risk in accordance with established Policy requirements.
• Assist in performing a detailed analysis to identify, assess, escalate, and manage risk exposures across Risk Categories (Operational Compliance, Strategic, Reputational, etc), including material, emerging and concentration risks in accordance with enterprise Policies and the establishment of Key Indicators to monitor risk exposures.
• Assist in supporting Risk Appetite and monitor / assess exposures against this in accordance with enterprise requirements (if applicable).
• Be part of the process to identify, assess, record and response to Operational and Compliance Risk events, ensuring these are captured accurately, timely and in accordance with requirements.
• Help ensure that adequate governance and training are in place to support management of Risk profiles.
• Support with risk and control assessments or coordination for programs within various risk stripes and ensure sufficient subject matter expertise exists to enable management of these risks within the Business (e.g. third party, fraud, sanctions etc.) (if applicable).
• Identify gaps in implementing policy documents and draft appropriate procedures to meet requirements of the Citi Policy governance operating model.
• Appropriately assess risk when business decisions are made, demonstrating particular consideration for the firm's reputation and safeguarding Citigroup, its clients and assets, by driving compliance with applicable laws, rules and regulations, adhering to Policy, applying sound ethical judgment regarding personal behavior, conduct and business practices, and escalating, managing and reporting control issues with transparency.

As a successful candidate, you’d ideally have the following skills and exposure:

• 6-10 years relevant work experience in Business Risk & Controls
• MS Excel, MS Access, SAS, SQL, Visual Basic a plus. 5+ years’ experience in financial services.
• Proficient with the Manager’s Control Assessment module.
• Consistently demonstrates clear and concise written and verbal communication skills.
• Effective organizational influencing skills required.
• Experience with work-flow systems, excellent project management, and organizational skills.
• Demonstrated ability to lead global team efforts.
• Excellent problem-solving skills and self-motivated.
• Ability to see the big pictures with high attention to critical details.
• Demonstrated ability to develop and implement strategy and process improvement initiatives.

• Bachelor’s/University degree or equivalent experience, potentially Master’s degree.

Working at Citi is far more than just a job. A career with us means joining a family of more than 230,000 dedicated people from around the globe. At Citi, you’ll have the opportunity to grow your career, give back to your community and make a real impact.

Take the next step in your career, apply for this role at Citi today

https://jobs.citi.com/dei

This job description provides a high-level review of the types of work performed.  Other job-related duties may be assigned as required.

-------------------------------------------------

Job Family Group:

-------------------------------------------------

Job Family:

------------------------------------------------------

Time Type:

------------------------------------------------------

Citi is an equal opportunity and affirmative action employer.

Qualified applicants will receive consideration without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Citigroup Inc. and its subsidiaries ("Citi”) invite all qualified interested applicants to apply for career opportunities. If you are a person with a disability and need a reasonable accommodation to use our search tools and/or apply for a career opportunity review Accessibility at Citi.

View the "EEO is the Law" poster. View the EEO is the Law Supplement.

View the EEO Policy Statement.

View the Pay Transparency Posting

The Quality Manager is responsible for ensuring the consistent delivery of quality service and products, regularly engaging in systemic and process reviews for continuous improvement. He/She will lead a team of QC/ QA personnel to work with Production, Sales & Operation teams to ensure and provide training for meeting strict quality and food safety compliance. The incumbent must have relevant work experience in food manufacturing and a track record in change leadership and quality management.

• Candidate must possess at least Advanced/Higher/Graduate Diploma, Bachelor's Degree, or Professional Degree in Food Science & Technology and/or Business Administration & Management
• At least 10 years of continuous work experience in a similar position in food manufacturing, with at least 5 years in quality management functions, is required.
• Only professionals with experience in Food Manufacturing and Quality Assurance or equivalent in a fast-paced, high mix/ high volume, BRCGS or ISO22000 food safety management system need to apply.

Full-Time position

Essential Duties and Responsibilities:

• Liaise with internal & external on control design and process flow. Implementation of SCADA/PLC/DCS projects from concept to design, configuration & programming, testing and commissioning for process plants.
• Troubleshoot electrical design and software issues together with assembly/debug team.
• Lead and provide coaching, supervise, make sound decisions and guide to Control Engineer and electrical team.
• Working knowledge of Ethernet, Profinet, ProfibusDP ,Profibus PA, Modbus communication
• Hands on experience but not limit on SIEMENS, OMRON, ALLEN BRADLEY PLC & WINCC HMI or other SCADA systems is essential.
• Oversee the preparation of project documentation for new and refurbish projects.
• Able to carry out testing & commissioning at project site independently locally as well overseas.
• Arrange resources to support project and service team to meet the required timeline
• Occasionally travel local & oversea is required
• Assist and arrange support on IT,OT, IQ,OQ, PQ for new project
• Other duties as assigned by the Management

Education and/or Work Experience Requirements:

• Minimum Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Electrical/Electronic), Engineering (Computer/Telecommunication) or equivalent
• At least 5 year(s) of working experience in the related field is required for this position
• Must have knowledge in computer systems, and high-level knowledge of software applications on PLC’s, vision control system with preferable experience in integrated manufacturing systems
• Must have high level knowledge of Industrial Networks architectures (Ethernet IP, Control Net & Profibus)
• Experience of working on an MES system will be a bonus
• Knowledge of machine control systems
• Good inter personal skills.
• Detail-oriented for understanding complex systems and the ability to pay attention to details, as a minor error can result in major problems.
• Ability to function in a fast-paced work environment
• Well organized and respectful of project deadlines
• Ability to communicate in an open, clear, precise and effective manner with customers, peers and all levels of management
• Have good knowledge of industry accepted good automated manufacturing practices (GAMP) and validation process (is an advantage)
• Organizational skills for keeping track of project budgets, employees and schedules simultaneously.
• Can speak and write in English

Job Info:

• Salary: Basic up to $4000 + AWS + VB
• Working Hour: Monday - Friday (7.50am - 4.55pm)
• Location: Joo Koon

Job Scope:

• Plan, supervise, and execute projects and tasks
• Address and prevent issues to enhance customer satisfaction regarding product quality
• Maintain quality, environmental, and water efficiency systems within the company
• Assist in the maintenance and compliance of ISO 9001, ISO 14001, IATF 16949, ISO 17025, ISO 13485, and ISO 46001 standards
• Understand the company's policies and objectives related to quality, environment, water efficiency, and occupational health and safety (OH&S), as well as environmental aspects, safety risk assessments, and information security risks
• Conduct internal Quality and Environmental Management System (QEMS and WEMS) audits and coordinate external audits
• Monitor quality failure costs in the production department
• Perform calibration and maintenance of x-ray machines, ensure cleanliness in the x-ray equipment area, and update monthly schedules for x-ray machine maintenance

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Job Description

► Monday to Friday

► Office Location - East

► Basic up to $2800 + VB

Job Responsibilities

• Conduct daily stock checks of products and report findings to inventory control supervisor
• Coordinate and follow up with Retail Operation to resolve inventory issues
• Assist in validating count results of cycle counts / stock take
• Maintain and updating of records

Job Requirements

• Minimum Diploma in Logistics
• Minimum 1 years of relevant experiencs

For consideration, kindly submit your CV by clicking “APPLY NOW”

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R1326597 | Oh Jia Qi Doreen

About the Role

As a Quality Control Inspector, you'll be reporting to an Operations Manager and working as a part of our Operations team. At QIMA, the role of Operations is to deliver our industry-leading services to our clients while ensuring that all the work is performed to the QIMA standard of quality. Your role in this will be to:

• Check email daily in order to receive inspection documents and guidelines;
• Attend inspections on time and communicate with supplier in a professional way;
• Perform the inspection of the merchandise according with company procedures. Supervise the stuffing of the containers according with company procedures;
• Fulfill inspection reports according with company procedures and time lines.

Job Description

• Assists Assistant Section Manager with the daily NDT Inspection activities and manpower deployment
• Reviews technical specifications, drawings, procedures, and standards required in the project
• Reviews and checks the project NDT plan and procedures submitted by NDT Assistant Engineer/ Engineer
• Monitors the project schedule for NDT activities
• Reviews and monitors NDT contractors' technicians’ list, equipment calibration list, and their NDT reports before submission to project clients
• Performs dressings, electrocardiograms, and other minor procedures
• Liaises with QA Engineers on the NDT work scope, requirements, and progress
• Ensures there is proper documentation of project inspection and test activities
• Initiates recommendations and provides solutions to project problems through designated channels
• Performs internal audits on project documents and inspection activities
• Ensures that all standard operating procedures comply with specifications, quality standards, statutory and regulatory requirements
• Any other assigned duties and responsibilities

Job Requirements

• Degree/ Diploma in Naval Architecture/ Civil/ Marine and Offshore Engineering/ Mechanical Engineering
• At least 3 years of relevant Quality Assurance working in Radiography and Ultrasonic Flaw Detection Test, preferably in the offshore and marine industry
• Possess a positive and willing-to-learn attitude

1. Perform analytical equipment lifecycle management as per current regulatory requirements / SOP.
2. Involve in equipment qualification, writing URS, reporting and implementing SOP’s for system operation and maintenance, monitoring performance of the equipment and decommissioning of equipment.
3. Support and / or perform maintenance / calibration of laboratory equipment in compliance with established schedules.
4. Liaise with vendors/service providers for PM / Calibration in a timely manner.
5. Responsible for maintenance / calibration planning of equipment within QC Department.
6. Ensure real time documentation, maintain data integrity and appropriate traceability.
7. Responsible for the accurate, timely and compliant execution of assigned projects and related documentation.
8. Assist / perform method validation and transfer as required.
9. Conduct QC Department equipment operation and maintenance training to QC staff as required.
10. Perform and / or support in maintaining the asset register for equipment in the QC Department.
11. Initiate CAPEX for equipment purchase.
12. Responsible for QC lab and equipment/instrument cleanliness.
13. Any other activities as and when assigned by the Superior.

EDUCATION & EXPERIENCE

EDUCATION: Degree / Diploma in science related discipline (e.g. Chemistry, Chemical Engineering, Biotechnology).

EXPERIENCE: Minimum 4 years of quality control experience in pharmaceutical manufacturing industry.

KNOWLEDGE & SKILLS

1. Possess working knowledge of GMP in the pharmaceutical industry.
2. A good team player with positive learning attitude.
3. Working knowledge of validation, calibration and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
4. Excellent interpersonal and analytical skills, good verbal and written communication skills.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Description & Requirements

Able to operate CNC CMM machine with 2 years experience needed is a priority.

Knowledge in QC equipments, example: Height Gauge, Smart Scope, Veriner caliper etc.

With computor knowledge to provide QC report and handle NCR.

Must have knowledge in drawing specification. Example: Tolerance, Surface Treat, Heat Treat etc.

Basic knowledge in machining process.

Dear all

One of our Oil and gas Industry client is looking for their workshop as a Quality Engineer. Person education should be in Bachelor Degree with min 5 years of relevant working Experience

Responsibilities:

• Monitor operations to ensure that they meet production standards.
• Recommend adjustments to the assembly or production process.
• Inspect, test, or measure materials.
• Measure products with calipers, gauges, or micrometers.
• process control, control charts, acceptance sampling, and product quality control
• Must know about the CNC machines, and knowledge in Programming.

Office Location: 
Pioneer Turn (Jurong)

Opportunities & Exposure

1. Drive process optimization in Claims Management

• Perform UAT (User Acceptance Test) on the evolution/ enhancement of a newly developed online tool
• Enhance communication & marketing of new tool - Support roll-out of tool to new sites within APAC
• Provide training to internal & external teams within APAC
• Identify improvement areas and develop an action plan with the project committee to reduce claims

2. Drive improvement in data quality management

• Participate in evidence gathering and root cause determination to secure the quality process in our logistics partner (Bollore) to fulfill customers’ expectation
• Perform thorough quality analysis to measure the effectiveness of various quality processes using data and internal auditing tools
• Initiate corrective actions for procedural or process deficiencies
• Develop common tools to facilitate weekly performance tracking/ reporting and follow-up of KPIs and action plan

Responsibilities:

• Lead and manage the food safety and quality team to ensure compliance with food safety standards and regulations.
• Develop and implement food safety and quality policies, procedures, and guidelines.
• Conduct regular inspections and audits to ensure adherence to food safety protocols.
• Monitor and analyze quality data to identify trends and areas for improvement.
• Collaborate with cross-functional teams to address quality issues and implement corrective actions.
• Manage and maintain the company's food safety and quality management system.
• Develop and deliver training programs on food safety and quality control.
• Conduct internal audits to evaluate the effectiveness of food safety and quality systems.
• Ensure compliance with regulatory requirements and industry standards.
• Stay updated on industry best practices and advancements in food safety and quality management.

• Bachelor's degree in Food Science, Nutrition, or related field.
• Minimum 5 years of experience in food safety and quality management roles.
• Strong knowledge of food safety regulations and standards.
• Experience with food safety and quality management systems.
• Certification in Food Safety (e.g., HACCP, GMP) is highly desirable.
• Excellent leadership and team management skills.
• Strong analytical and problem-solving abilities.
• Excellent communication and interpersonal skills.
• Ability to work cross-functionally and collaborate effectively with teams.

Interested candidates who wish to apply for the advertised position, please send in your resume to [email protected].

EA License No: 13C6305

Reg. No.: R1654399

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

About Us:

JSTT Singapore Pte Ltd is a leading producer of high-quality sushi and sashimi, providing fresh and delicious products to supermarket counters across [specific regions]. Committed to excellence, we are seeking a skilled and dedicated professional to join our team as a Food Safety and Quality Assurance Officer.

Responsibilities:

As the Food Safety and Quality Assurance Officer, you will be responsible for ensuring the highest standards of food safety, quality, and compliance with ISO22000 and FSSC regulations in our central kitchen and 20 supermarket counters. Your key responsibilities include:

1. Compliance Management:

• Oversee and implement food safety and quality management systems in accordance with ISO22000 and FSSC standards.
• Conduct regular audits and inspections to ensure compliance with all relevant regulations and internal standards.

2. Documentation and Reporting:

• Maintain accurate records of all food safety and quality assurance activities.
• Prepare comprehensive reports for management, summarizing key performance indicators and areas for improvement.

3. Training and Development:

• Develop and deliver training programs for staff at the central kitchen and supermarket counters on food safety protocols and best practices.
• Keep the team informed about updates in food safety regulations and industry trends.

4. Incident Response:

• Establish and implement effective procedures for handling food safety incidents and recalls.
• Conduct thorough investigations into any breaches of food safety standards and recommend corrective actions.

5. Supplier and Vendor Management:

• Collaborate with suppliers and vendors to ensure the quality and safety of raw materials used in our production processes.
• Evaluate and approve suppliers based on established criteria.

Qualifications:

• Certification in ISO22000 / FSSC standards.
• Proven experience in food safety and quality assurance, preferably in the sushi and sashimi production industry.
• Strong knowledge of local and international food safety regulations.
• Excellent communication and training skills.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Responsibilities:

• Focus on EASA and CAAS main changes under Direction of ARU Quality Manager to update when necessary.
• Perform internal audits as per internal audit schedule in accordance AS9110C and P-145 requirements
• Support external audits, (Civil Aviation Authorities, customers and Certification bodies)
• Manage and update Quality procedures in the Quality Management System.
• Conducts trainings on quality subjects to staff to enhance understanding of subject as per training plan
• Ensure internal production quarantine item are managed timely and accurately
• Validate the qualification of new test equipment, Qualification of New Repair Capability & Qualification of New Test Bench
• Supporting India MRO Project Phase

Requirements:

• Min. Degree/ Diploma in Quality, Quality Management, Engineering or Equivalent
• Experienced in Avionics Workshop Maintenance Environment/ Electronics Workshop / Mechanical Workshop
• Experienced in Quality Auditing
• Experienced in Procedural and Process developments
• Knowledge in: AS9110C (ARU) & PART-145 (ARU)

Other Information:

• Working location: Changi
• Working hours: Monday - Friday, 9am - 6pm
• Company transport provided at designated MRT stations
• 1 Year Contract position