Job Description & Requirements

• Review the inspection history to summarize the integrity status of the plant equipment and piping systems.
• Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.
• Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan
• Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).
• Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.
• Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.
• Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.
• Provide recommendations and timely updates on equipment degradation problems.
• Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.
• Preparation of final inspection reports with all findings, abnormalities and recommendations.
• Ensure quality of inspected items to meet project requirements and standards.
• Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.
• Read, understand project related ITP, procedures, specification requirements.
• Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.
• Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication
• Knowledge in welding inspection

Eligibility Criteria

• Graduate Engineers with 3-6 years of relevant experience.
• Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.
• Experience in Refinery and Oil & Gas must
• Experience in QA/QC and Knowledge in Non-Destructive Testing methods.
• Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.
• Work Independently and can work in Singapore and other countries.
• Fluent Reading, Speaking and Writing in English.
• Willing to commit 24 months contract/ project completion.
• Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.
• Energetic & Result Orientated.

Job Description & Requirements

Eligibility Criteria

• Graduate Engineers with 3-6 years of relevant experience.
• Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.
• Experience in Refinery and Oil & Gas must
• Experience in QA/QC and Knowledge in Non-Destructive Testing methods.
• Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.
• Work Independently and can work in Singapore and other countries.
• Fluent Reading, Speaking and Writing in English.
• Willing to commit 24 months contract/ project completion.
• Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.
• Energetic & Result Orientated.

Job Responsibiltes

• Review the inspection history to summarize the integrity status of the plant equipment and piping systems.
• Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.
• Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan
• Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).
• Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.
• Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.
• Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.
• Provide recommendations and timely updates on equipment degradation problems.
• Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.
• Preparation of final inspection reports with all findings, abnormalities and recommendations.
• Ensure quality of inspected items to meet project requirements and standards.
• Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.
• Read, understand project related ITP, procedures, specification requirements.
• Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.
• Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication
• Knowledge in welding inspection

Job Description & Requirements

• Review the inspection history to summarize the integrity status of the plant equipment and piping systems.
• Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.
• Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan
• Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).
• Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.
• Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.
• Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.
• Provide recommendations and timely updates on equipment degradation problems.
• Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.
• Preparation of final inspection reports with all findings, abnormalities and recommendations.
• Ensure quality of inspected items to meet project requirements and standards.
• Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.
• Read, understand project related ITP, procedures, specification requirements.
• Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.
• Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication
• Knowledge in welding inspection

Eligibility Criteria

• Graduate Engineers with 3-6 years of relevant experience.
• Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.
• Experience in Refinery and Oil & Gas must
• Experience in QA/QC and Knowledge in Non-Destructive Testing methods.
• Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.
• Work Independently and can work in Singapore and other countries.
• Fluent Reading, Speaking and Writing in English.
• Willing to commit 24 months contract/ project completion.
• Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.
• Energetic & Result Orientated.

Roles & Responsibilities:

1. Handle Training Coordination - Schedule seminars,

2. Liaise with learners,trainers and related departments & organisations to ensure programmes run smoothly

3. Provide customer service for all training course-related enquiries - incoming and outgoing

4. Handle Phone inquiries, send replies by email, and phone, attend to walk-in customers

5. Ensure timely response to customers enquires, quotation and training request

6. Call Prospective students to advice about training programs

7. Assist management in day-to-day operations and office administration

8. Manage and grow our presence on social platforms like Facebook, LinkedIn

9. Collaborate with IT and design teams for website enhancements

10. Ensure the website is user-friendly and up-to-date with the latest content.

11. Develop and implement marketing strategies to enhance brand visibility and market penetration.

12. Collaborate with other departments to promote products and services.

13. Analyse market trends and competitors' activities.

14. Provide monthly reports for management review

Requirements:

1. Minimum 1-2 years’ experience in customer support or coordination role is preferred

2. Min. O Level as educational requirement

3. Computer literacy e.g. MS Office (Outlook, Word, Excel, Photoshop, PowerPoint) and/or Google Docs, Sheet.

4. Excellent interpersonal and communication skills.

5. Hands-on and a self-motivated individual, Able to work independently without much supervision

6. Organizational and administrative skills

Responsibilities:

• Visual inspection of incoming raw material, incoming SKU parts, in-process parts and finished goods
• Hardness Testing - Testing of finished goods on Hardness Tester
• First Article Testing & Pressure Testing
• Recording of Data
• Carry out daily maintenance of machines
• Setup, operate and maintain all measuring equipment, gauges and fixtures for making accurate inspection checks
• Perform daily housekeeping and any other duties assigned

Working Hours: Day Shift: 7:45am - 5:00pm (Monday - Thurs); 7:45am - 4:30pm (Friday)

Location: Tuas West MRT

Salary: Basic from $2000 (depending on work experience)

Other Additional Salary: 13th month AWS + Quarterly Production Incentive + OT

Requirements:

• Candidate must possess at least Professional Certificate/NiTEC or equivalent.
• Hardworking; able to carry at least 20 - 30 KG.
• Knowledge in using basic measurement instruments
• Independent and able to work under a fast pace environment

Job Descriptions

1. Guide/Train Quality Control Inspectors

2. Gauge setting for critical thread/groove

3. Conduct First Article Check and outgoing inspections

4. Responsible for all incoming raw material hardness check

5. Responsible for marking all outgoing finished products

6. Issue Dimension Reports for all finished work pieces

7. Inspect finished work pieces according to drawings’ specifications

8. Oil and Gas industry working environment

9. Any other duties maybe assigned as and when it requires

Requirements:

ITE or GCE N Level or equivalent working experience

Job Description & Requirements

• 1. Approve or reject all procedures, specifications, methods, and results
• 2. Approve or reject all raw materials, packaging, materials, labelling and finished product
• 3. Review all production records for accuracy and completeness before approving for distribution
• 4. Establish procedures for revising procedures, formulas, and more
• 5. Approve changes to procedures, formulas, and more
• 6. Ensure that the latest version is being used at all times
• 7. Perform all the required tests to ensure identity, purity, potency and composition, and to ensure that products are not contaminated or adulterated
• 8. Investigation of customer complaints
• 9. Evaluation of new vendors/ materials
• 10. Internal audits to verify compliance to AVA regulations
• 11. Maintaining relationships with vendors and regulatory agencies
• 12. Maintain good personal hygiene as well as high work and safety standards in the workplace
• 13. Any ad-hoc duties as assigned

Qualifications & Skills

• Candidate must possess at least Diploma in Food Science/ Technology or in any field
• At least 1 years of working experience in the related field is required
• Proficient in MS Office (Excel, Powerpoint & Words)
• Strong communication skills
• Excellent time management and organisation
• Able to work in a fast-paced environment and within tight deadlines
• Is a team player with strong work ethics, great initiative with a positive and can-do attitude
• Familiar with HACCP and AVA standards

Working hours: 9am to 6pm Monday to Friday

Location: 10 Chin Bee Drive, level 3, Singapore 619861

Salary: S$2500 - $3200

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Diploma in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Quality Inspector (Jurong East)

off-peak: 5 days - 8am - 5.30pm + evening/ weekend OT

peak season: 2 shifts (12hour rotational shift)

base salary + OT pay + 1 month AWS + company shuttle bus

Focal point for inspection queries and scheduling of inspection activities. Ensures conformance of materials, purchased parts and manufactured parts in alignment with quality control plans, specifications, processes and standards. Adds value by ensuring products and services are delivered in compliance with customer expectations.

Job Responsibilities:

• Unboxing, unwrapping and preparing of items for inspection.
• Execute in process and/or final inspection of materials, purchased parts and manufactured parts to ensure conformance with quality control plan, procedures, documentation and standards.
• Review and ensure manufacturing work orders and associated documentation is completed and processed correctly in a timely and efficient manner.
• Monitor and ensure callibration of equipment, work areas are kept clean and appropriate PPE and best practice lifting practices are adhered to at all times.
• Prioritise inspection activities in alignment with delivery objectives.
• Effectively communicate non conformance issues to engineering / production expedites solutions as necessary to support delivery objectives.
• Attending production meetings.
• Completing of non scheduled urgent inspection tasks within the completions business.

SKILLS & QUALIFICATIONS:

• Comfortable working at Penjuru, Jurong East area. Company shuttle service provided
• Min NDT/ NDE/ SPM/ secondary education level
• 1-2 years' experience in manufacturing facility/ quality inspection/ industrial/ engineering
• Experience in manufacturing workshop processes and controls.
• Competent is reading and understanding engineering drawings, processes and procedures.

Quality Lead/ Supervisor (QAQC)

Location: Penjuru Place (shuttle bus provided)

Monday - Friday 8am - 5.30pm

The Quality Lead/ Supervisor is responsible for ensuring timely and effective implementation of the company's policies, procedures, and standards involved in assuring the quality of manufactured products and customer satisfaction, as well as for conducting quality control activities. The Quality Supervisor strives to ensure the facility adheres to quality licenses, standards and certifications.

A successful candidate will collaborate closely with functional areas such as Manufacturing, Procurement, Mfg. Engineering, Sustaining Engineering, Product Lines, R&M and Geozones regularly as well as presenting to internal teams plans and updates.

Job Responsibilities:

• Supervise and lead 4 Quality Control Inspectors and liaise with internal & external stakeholders.
• Maintain site Quality Management System.
• Update QMS records and maintain all necessary documentation and certificates.
• Responsible for following management of change as processes and procedures are updated as per QMS requirements.
• Perform regular process audits in Manufacturing areas and functional areas, including technical work instructions, processes, procedures, and competence and ensure compliance.
• Generate CARs related to any deficiencies and track them to completion.
• Keep competency records up-to-date.
• Conduct training related to QMS, procedures, WIs, others.
• Actively participate in Contract Reviews.
• Develop customer QCP Plans. Ensure contractual requirements are built into Quality Control plans.
• Actively participate in Pre-Production meetings.
• Coordinate Client visits, and audits and constant communication to demonstrate our commitment and promote the Corporate Quality Management System.
• Drive action trackers to completion, related to customer audits, manufacturing reviews or qualification process.
• Coordinate TPIs per customer QCPs, and per production schedule. Ensure documentation meet requirements.
• Review/release WOs from a Quality point of view.
• CPARs/NCRs/COPQ; monitor performance/trends, data analysis, and evaluate the effectiveness of corrective actions to ensure that the required improvements are sustained. Actively participate in RCA. Monitor/track other Quality KPIs.
• Coordinate with product design engineers and manufacturing engineers the requirements in the quality plans and inspection and test plans to be aligned with their engineering design criteria, production schedules and customer requirements.
• Coordinate quality assurance plans for new PNs/product introductions.
• Review and approval purchased materials/products mill test certificates if it complies with the required company specifications and/or applicable industry standards prior to acceptance and use.
• Ensure quality control inspection and testing activities are performed in accordance with Global MFG QMS, customer QCPs/Inspection matrices, and/or local procedires and work instructions.
• Manage non-conformance process in accordance with Global MFG QMS.
• Identify a minimum of two continuous improvement projects per year to lead and complete with measurable improvement to the business in terms of margin, quality, etc
• Any other delegated responsibilities as instructed by his direct supervisor within the timeframe specified safely and efficiently to meet business requirements, provided the instruction is reasonable and you are capable and deemed competent to fulfil these.

Job Requirements:

• 5 to 8 years of experience with ISO-9001
• Minimum 5 years of experience in QA/QC role in the manufacturing environment
• Excellent written, reading, and oral communication in English
• Computer literate and familiar with Microsoft Office software at a minimum
• Fast learner, results-oriented and independent with strong interpersonal skills
• Possess strong customer service skills, i.e. listening, follow-through, and willingness to help
• Certified Auditor
• Ability to read engineering drawings
• Ability to interpret MTCs (Material Test Certificates) against the Company specifications
• Skilled at data mining (Excel Pivot Tables, other Excel tools)

Preferred

• Lean / Six Sigma experience
• Certified Lead Auditor
• Root Cause Analysis implementation experience
• Power BI dashboards.

For over 170 years, Leica Microsystems has helped shape the future by developing groundbreaking optical and digital solutions. As a global leader, we’re driven by continuous improvement to excite our customers and to create the best work environment for our people. Customer focus, innovation, and teamwork are at the core of our culture and the foundation of our success.

Want to be part of a company whose products are part of cutting-edge research around the world? Join Leica Microsystems in our commitment for brilliant solutions and insight.

Leica Microsystems is one of 10 Life Sciences companies of Danaher. Together, we accelerate the discovery, development and delivery of solutions that safeguard and improve human health.

We currently offer the following position in our office in Singapore which will be on-site.

QUALITY TECHNICIAN, IPM

Overview

To perform incoming inspection of purchased material.

Responsibilities

• Perform independent receiving inspections of raw materials and incoming parts to ensure parts meet quality standards.
• Review material certifications against drawings and purchase order to ensure compliance to specifications.
• Document all inspection and test results appropriately to ensure the integrity of the quality data recording and reporting process.
• Respond timely to requests for engineering assistance and inspections.
• Identify and segregate non-conforming material.
• Re-inspect sorted or reworked material as required.
• Perform First Article Qualification to ensure part compliance.
• Comply and adhere to company Quality Management System and Environment, Health & Safety requirements.
• Perform other tasks assigned by Supervisor.

Your Profile

• ITE, NTC, NITEC with minimum 5 years of relevant working experience or Diploma in related fields with minimum 3 years of relevant working experience.
• Must have experience in using basic measurement instruments and First Article Qualifications
• Preferably have GD&T knowledge

What We Offer

• Equal pay is a given for us.
• Learn all there is about Kaizen, PSP's and Muda as part of our Danaher Business System (DBS) trainings - if you believe in continuous improvement like us.
• We offer a balance between support and autonomy to achieve your own goals in an international environment.

Get More Insight

Learn more about what we do and who we are by watching our company video “We Are Leica”: https://www.youtube.com/watch?v=1zHmalqMXN4

Are you interested to discover new opportunities in an innovative, team-oriented environment?

Do apply online - we are looking forward to your application!

1. Approve or reject all procedures, specifications, methods, and results

2. Approve or reject all raw materials, packaging, materials, labelling and finished product

3. Review all production records for accuracy and completeness before approving for distribution

4. Establish procedures for revising procedures, formulas, and more

5. Approve changes to procedures, formulas, and more

6. Ensure that the latest version is being used at all times

7. Perform all the required tests to ensure identity, purity, potency and composition, and to ensure that products are not contaminated or adulterated

8. Investigation of customer complaints

9. Evaluation of new vendors/ materials

10. Internal audits to verify compliance to AVA regulations

11. Maintaining relationships with vendors and regulatory agencies

12. Maintain good personal hygiene as well as high work and safety standards in the workplace

13. Any ad-hoc duties as assigned

Qualifications & Skills

• Candidate must possess at least Diploma in Food Science/Technology or in any field
• At least 1 years of working experience in the related field is required
• Proficient in MS Office (Excel, Powerpoint & Words)
• Strong communication skills
• Excellent time management and organisation
• Able to work in a fast-paced environment and within tight deadlines.
• Is a team player with strong work ethics, great initiative with a positive and can-do attitude.
• Familiar with HACCP and AVA standards

Job Types: Full-time, Permanent, Fresh graduate

Pay: $2,500.00 - $3,000.00 per month

Schedule:

• Monday to Friday

Supplemental pay types:

• 13th month salary

The Supplier Quality Engineer is responsible for developing and maintaining Company’s Approved Supplier List to meet Company’s requirements. The Supplier Quality Engineer is responsible to ensure quality of the parts/services provided by the suppliers.

Roles and Responsibilities:

• Lead QMS (Quality Management System) and Process audit for initial evaluation of new supplier and re-evaluate of existing approved suppliers to comply with ISO 9001/API Q1 and Company’s requirements.
• Monitor supplier's performance, analyze data to identify the risk and drive performance improvement plan to meet company’s supplier quality expectations.
• Lead investigation of Supplier Quality Issues by collaborating with all relevant internal and external stakeholders including Engineering team, SME (Subject Matter Expert), suppliers
• Initiate and guiding supplier to conduct RCA (Root Cause Analysis) using the appropriate quality tools: 8D Methodology, The 5-Whys, Fishbone Diagram, and other applicable problem-solving techniques.
• Execute Parts and Process Qualification Plan with suppliers.
• Setup Quality Inspection criteria (QIR) for new parts purchased from suppliers.
• Involve in supplier selection with sourcing team to input quality perspective.
• Provide training and addressing supplier’s technical queries.
• Support development and implementation of strategic initiatives when assigned.

Qualifications and Experience:

• Bachelor’s in Mechanical Engineering or equivalent.
• Experience in Supplier Quality or Manufacturing or Engineering or Project Management related functions.
• Preferred with ISO 9001:2015 QMS Auditor/Lead Auditor (CQI/IRCA) certification.

Technical/Critical Soft Skills:

• Well versed in Quality Assurance fundamentals including ISO 9001/API Q1, 8D Methodology, Root Cause Analysis, data analysis and other problem-solving techniques.
• Good understanding of manufacturing processes and their related quality risks.
• Effective verbal and written communicator at all levels within the organization and externally with suppliers.

Veronica Neo Shen Hwa - [email protected]

Personnel Reg No: R1110855

Manpower Staffing Services (S) Pte Ltd

EA Licence No: 02C3423

Job Info:

• Salary: Basic up to $4000 + AWS + VB
• Working Hour: Monday - Friday (7.50am - 4.55pm)
• Location: Joo Koon

Job Scope:

• Plan, supervise, and execute projects and tasks
• Address and prevent issues to enhance customer satisfaction regarding product quality
• Maintain quality, environmental, and water efficiency systems within the company
• Assist in the maintenance and compliance of ISO 9001, ISO 14001, IATF 16949, ISO 17025, ISO 13485, and ISO 46001 standards
• Understand the company's policies and objectives related to quality, environment, water efficiency, and occupational health and safety (OH&S), as well as environmental aspects, safety risk assessments, and information security risks
• Conduct internal Quality and Environmental Management System (QEMS and WEMS) audits and coordinate external audits
• Monitor quality failure costs in the production department
• Perform calibration and maintenance of x-ray machines, ensure cleanliness in the x-ray equipment area, and update monthly schedules for x-ray machine maintenance

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Summary

The Senior Manager, Quality Assurance is responsible for overseeing the Singapore site’s QMS as Site Quality Leader and Quality Management Representative. The position will provide guidance and support to the Singapore site’s quality team and will work closely with the Director of Quality, VP of Operations, and APAC regional business partners.

Key Accountabilities

• Appointed as the Singapore Quality Management Representative and Singapore Quality Site Leader for ISO 9001:2015 QMS.
• Ensure effectiveness and compliance to ISO 9001:2015 and various regulatory requirements as needed.
• Lead site quality team to drive operation and product quality improvements via data driven metrics.
• Oversee and support supplier quality, SCAR, product inspection, equipment calibration, CAPA, complaint investigation, change control, LMS training, and NPI activities.
• Chair quality management reviews and manage Internal & External audits.
• Support global quality system process integration, harmonization, and simplification. Managing local implementation and changes.
• Manage employee recruitment and development, performance management, and motivate team to achieve departmental objectives and goals.
• Escalate and manage any significant events such as safety, product shipping holds due to quality, regulatory, or any compliance issue.
• Lead or support identified special projects and key initiatives as needed.
• Work cross-functionally to achieve Singapore site objectives.

Requirements

• 8+ years of experience in Quality Management Systems within the medical device or pharmaceutical industry or under an ISO 13485:2016 or ISO 9001:2015 QMS.
• 5+ years of management experience.
• Knowledge of regulatory requirements and standards relevant to manufacturing such as (ISO45001/OHSAS18001 and ISO14001)
• Strong customer focus with complaint investigation, significant event reporting and CAPA skills.
• Internal Auditor certification.
• Strong data analysis skills and proficiency in electronic data management systems.
• Good understanding of quality management systems and tools such as PPAP, FMEA, and SPC.
• Ability to work independently and collaborate effectively with cross-functional teams.
• Proficiency in SAP, Microsoft Excel, Word, and PowerPoint.

Overview:

We are seeking a knowledgeable and passionate individual to join our team as an Industrial Control System (PLC) Instructor (part-time) This role will involve teaching and training individuals in the fields of electrical controls, Programmable Logic Controllers (PLCs), and industrial electricity. The ideal candidate will have a strong background in electrical engineering or a related field, along with practical experience in industrial settings.

Responsibilities:

• Develop and deliver comprehensive lesson plans and training materials covering topics such as electrical controls, PLC programming, motor controls, and industrial electricity.
• Provide guidance and support to students as they work through practical exercises and projects to reinforce learning objectives.
• Assess student progress through assignments, quizzes and mock tests, providing feedback to aid in their development.
• Stay updated on changes in regulations related to electrical controls and industrial electricity.
• Offer mentorship and guidance to students interested in pursuing careers in electrical engineering or related fields.
• Participate in professional development activities to enhance teaching skills and knowledge of relevant subject matter.

Qualifications:

• Relevant degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic).
• Undergraduates / Fresh graduates in local Universities of Singapore are welcome to apply.
• Experience with working with electrical controls, PLCs, and industrial electricity in a professional setting is an added advantage.
• Knowledge of equipment and tools commonly found in industrial settings.
• Familiar with PLC programming and experience with PLC hardware and software
• Knowledge of developing instructional materials and delivering training sessions to diverse audiences is preferred.
• Knowledge of relevant industry standards and safety regulations governing electrical systems and industrial equipment.
• Patience, enthusiasm, and a genuine passion for teaching and helping others succeed in their educational and career goals.
• Training will be provided.

Working Hours:

• 3 - 6 Hours per week.
• Weekday evenings or weekends.

Location:

• 5 minutes walk from Jurong East MRT

Interested candidates please submit your resume through: [email protected]

The S-Lab for Advanced Intelligence invites applications for the position of Research Associate.

We are seeking Research Associate to join a university-level research centre collaborating with industry. The position is for one year, renewable subject to satisfactory performance. Successful candidates will be involved in a project that is related to physics-informed machine learning and control with application to data centre operations.

Key Responsibilities:

• To independently undertake research in physics-informed machine learning.
• To produce research reports and/or publications as required by the funding body or for dissemination to the wider academic community.
• To provide support to other researchers and students associated with the project.
• To attend, contribute, and where necessary lead relevant meetings.
• To undertake any other duties relevant to the programme of research.

Job Requirements:

• A Master’s degree in relevant fields;
• Have a solid foundation in at least two of following areas: Computer Science, Machine Learning, Deep Learning, Automatic Control;
• Good publication record in top-tier machine learning or control-related conferences/journals is an asset;
• Knowledge of scientific or engineering software like PyTorch, TensorFlow, Keras, etc.;
• Demonstrate outstanding communication skills, clear logical thinking, and willingness to learn.

We regret that only shortlisted candidates will be notified.

We're on the lookout for a top-tier Software Quality Engineer to join our team, delving into both Automation and Manual testing within our cutting-edge modules. We're seeking someone with exceptional communication skills, ready to dive into technical discussions and solutioning sessions.

• Agile development culture to promote continuous learning and growth.
• Competitive remuneration package.

Responsibilities:

• Execute a range of tests, encompassing manual, functional, performance, and exploratory examinations, alongside User Acceptance Testing (UAT).
• Provide support in addressing issues encountered during testing and implementation phases, ensuring swift resolution.
• Collaborate closely with internal development teams, external vendors, and end-users to orchestrate seamless User Acceptance Testing (UAT), system integration evaluations, and performance assessments
• Champion the incorporation of cutting-edge technologies, methodologies, and tools within Agile software environments.
• Uphold stringent Quality Standards throughout the software development lifecycle, ensuring excellence at every phase.
• Execute both manual and automated test scripts.

Job Requirements:

• Bachelor's degree in Computer Science, Engineering, or related field.
• Minimum of 3 years of experience in software quality testing and automation.
• Proficiency in Cypress, Selenium and K6.
• Experience working in Agile development teams.
• Excellent communication and collaboration abilities
• Familiarity with other automation tools and frameworks will be an added advantage.

Interested candidates may apply via email to [email protected] (indicating Job ID J43758 for faster processing). All job applications will be processed with strict confidence and only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – Outsourcing Team
ScienTec Consulting Pte Ltd – 11C5781

Description:

- Facilitate the collection of incoming recycled materials for production

- Create and manage production lot traveller for line usage

- Enter daily production data into productivity report and customer inventory report

- Create and maintain certificate of conformance for outgoing shipments

- To work closely with production line to ensure that customers’ orders can be fulfilled on time

- To assist in handling logistics and shipping of products

Requirements:

- Diploma in Engineering

- Prior experience in production/ manufacturing would be an advantage but not compulsory

- Basic knowledge of MS Office suite

- Possess good communication and coordination skills

- Keen leaner and willing to be hands on with the production team

Responsible to monitor the quality of incoming and outgoing products or materials to ensure that the products meet the required standard and sometimes making suggestions to improve quality or efficiency.

- Able to operate and create program for CMM Machine

- Experience in Precision Machining/Engineering Industry

- Minimum of 4 years hands-on exposure in quality inspection of Machined/Painted metal parts

- Knowledge in using measuring instruments preferred

- Proficient in spoken and written English

- Able to work overtime and weekends (if required)

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation.
• Support the maintenance and improvement of Quality Management System.
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training of quality awareness.
• Assist in keeping track on relevant quality standards, ensure compliance and preparedness for External Audit.
• Assist QA/QC Manager with Internal and External Audit.
• Perform any ad-hoc duties as and when assigned.

Requirements:

• Posses at least diploma in civil engineering or equivalent
• Knowledge and proficiency in Microsoft Office.
• Exceptional attention to detail
• Good oral and written communication skills
• Great team player and able to work efficiently with minimal supervision
• Training provided by QA/QC Manager / Engineer.

You may send your resume / CV to email address directly: [email protected]

Job Description

1. Provide prompt and timely pest control services/inspection at customers’ premises.
2. Uphold strict quality customer service.
3. Submit service report on timely basis.
4. Responsible in maintaining pest control equipment.

Desired Candidate Profile

1. Minimum qualification "N"/"O" Level /NiTEC or any other relevant qualifications.
2. At least 2 years working experience, preferably in the vector control industry.
3. Full NEA Vector Control Technician license (advantageous).
4. Applicants without NEA license are welcome but must be willing to attend the Joint ITE-NEA Certificate in Pest Management course (part-time evening class for 3 months).
5. Class 3 driving license (advantageous).

Job Descriptions:

• Monitor food production lines to ensure adherence to quality standards and procedures.
• Analise raw food, packaging, and finished food products to ensure they meet specifications.
• Manage and maintain quality control documentation.
• Analise data and identify trends to pinpoint areas for improvement in food safety and quality.
• Implement corrective actions to address any deviations from quality standards.
• Work closely with production teams to ensure everyone is following quality protocols.
• Conduct sampling and testing of ingredients and products throughout the food production process.
• Carry out daily visual inspection of finished food products to ensure food safety systems are in place.
• Testing of incoming raw food materials and quality of finished food products to make sure it's complied with company standards.
• Enforce the practice of hygiene checks to ensure hygiene and cleanliness of premises and workers are of a high standard.
• Execute pest control system and liaise with external pest controller for monthly checking and servicing.
• Maintaining and implementing Food Safety Management Systems including HACCP, ISO22000 and Halal MUIS.
• Performing various in-line quality control checks;
• Conduct quality audits and assist in the development of quality management and quality assurance standards;
• Assist sales or other departments with food product specification, certification and quality related document requests.

Job Requirements:

• Good verbal and written communication skills (English, Mandarin)
• Able to start work in short period
• Minimum Diploma in Food Science, Microbiology, or a related field (preferred).
• Understanding of food safety regulations and HACCP principles.
• Minimum 2 years of QC experience in food manufacturing, retail and supermarket or a related industry is a plus.
• Strong analytical and problem-solving skills.
• Excellent communication and interpersonal skills.
• Attention to detail and a commitment to quality.

Working day

Mondays to Fridays (full day)

Saturdays (half day)

SR Quality / Quality Lead/ Supervisor (QAQC)

Location: Penjuru Place (shuttle bus provided)

Monday - Friday 8am - 5.30pm

The Quality Lead/ Supervisor is responsible for ensuring timely and effective implementation of the company's policies, procedures, and standards involved in assuring the quality of manufactured products and customer satisfaction, as well as for conducting quality control activities. The Quality Supervisor strives to ensure the facility adheres to quality licenses, standards and certifications.

A successful candidate will collaborate closely with functional areas such as Manufacturing, Procurement, Mfg. Engineering, Sustaining Engineering, Product Lines, R&M and Geozones regularly as well as presenting to internal teams plans and updates.

Job Responsibilities:

• Supervise and lead 4 Quality Control Inspectors and liaise with internal & external stakeholders.
• Maintain site Quality Management System.
• Update QMS records and maintain all necessary documentation and certificates.
• Responsible for following management of change as processes and procedures are updated as per QMS requirements.
• Perform regular process audits in Manufacturing areas and functional areas, including technical work instructions, processes, procedures, and competence and ensure compliance.
• Generate CARs related to any deficiencies and track them to completion.
• Keep competency records up-to-date.
• Conduct training related to QMS, procedures, WIs, others.
• Actively participate in Contract Reviews.
• Develop customer QCP Plans. Ensure contractual requirements are built into Quality Control plans.
• Actively participate in Pre-Production meetings.
• Coordinate Client visits, and audits and constant communication to demonstrate our commitment and promote the Corporate Quality Management System.
• Drive action trackers to completion, related to customer audits, manufacturing reviews or qualification process.
• Coordinate TPIs per customer QCPs, and per production schedule. Ensure documentation meet requirements.
• Review/release WOs from a Quality point of view.
• CPARs/NCRs/COPQ; monitor performance/trends, data analysis, and evaluate the effectiveness of corrective actions to ensure that the required improvements are sustained. Actively participate in RCA. Monitor/track other Quality KPIs.
• Coordinate with product design engineers and manufacturing engineers the requirements in the quality plans and inspection and test plans to be aligned with their engineering design criteria, production schedules and customer requirements.
• Coordinate quality assurance plans for new PNs/product introductions.
• Review and approval purchased materials/products mill test certificates if it complies with the required company specifications and/or applicable industry standards prior to acceptance and use.
• Ensure quality control inspection and testing activities are performed in accordance with Global MFG QMS, customer QCPs/Inspection matrices, and/or local procedires and work instructions.
• Manage non-conformance process in accordance with Global MFG QMS.
• Identify a minimum of two continuous improvement projects per year to lead and complete with measurable improvement to the business in terms of margin, quality, etc
• Any other delegated responsibilities as instructed by his direct supervisor within the timeframe specified safely and efficiently to meet business requirements, provided the instruction is reasonable and you are capable and deemed competent to fulfil these.

Job Requirements:

• 5 to 8 years of experience with ISO-9001
• Minimum 5 years of experience in QA/QC role in the manufacturing environment
• Excellent written, reading, and oral communication in English
• Computer literate and familiar with Microsoft Office software at a minimum
• Fast learner, results-oriented and independent with strong interpersonal skills
• Possess strong customer service skills, i.e. listening, follow-through, and willingness to help
• Certified Auditor
• Ability to read engineering drawings
• Ability to interpret MTCs (Material Test Certificates) against the Company specifications
• Skilled at data mining (Excel Pivot Tables, other Excel tools)

Preferred

• Lean / Six Sigma experience
• Certified Lead Auditor
• Root Cause Analysis implementation experience
• Power BI dashboards.

About the role

This position is for a Supplier Quality Engineer, who lead and collaborate to drive quality performance that improves business results. Steward supplier qualification / certification, assessment, statistical monitoring, escape management, and quality issue resolution processes with knowledge and explanations of Supplier Quality & Compliance practices and procedures to uphold solid quality management system.

Key Responsibilities:

As a Supplier Quality Engineer, you’ll be responsible for:

• Stewards supplier qualification / certification, assessment, statistical monitoring, escape management, and quality issue resolution processes to uphold solid quality management system.
• Reviews and makes recommendations on quality data and drives development of part / supplier specific quality issue resolution to uphold excellent product quality.
• Drives root cause analysis & problem solving (Red-X & 8D) in escape management procedures. Makes recommendations to systemic improvements over product and process design or control of suppliers for robust DFMEA and/or PFMEA .
• Executes processes and procedures for supplier qualification / certification, source inspection and material release processes, Production Part Approval Process (PPAP) acceptance, and Corrective Action Boards / Quality Clinics with suppliers.
• Ensure supplier is capable to meet all requirements for process change management as well as any other applicable projects.
• Align activities to support Carrier Supplier Excellence program to ensure sustainable continuous improvement.
• Develops and executes action plans that drive quality performance and improve business results.
• Develops supplier quality strategies and to collaborate with others to improve supplier quality performances.

Requirements

We are looking for people who possesses excellent communication skills and has good stakeholder management. If this is you, get in touch.

As a minimum you must have:

• Minimum Degree in Mechanical, Electrical Engineering or any related fields.
• ​A minimum of 5 years prior relevant experience OR an advanced degree in a related field and a minimum of 3 years experience.
• knowledge in ISO, APQP, PPAP & SPC preferred.
• Good communication and interpersonal skills.