JOBSCOPE OVERVIEW

1. Represent QA/QC department in 2G Management Meetings or other meetings required by Directors.

2. Create and maintain standard operating procedure (SOP’s), protocols, guidelines that ensure consistency and efficiency throughout the QA cycle.

3. Acts as Committee of all ISO audits.

4. Supervise and manage QA/QC team and interns.

5. Conduct physico-chemical and microbiological test for Chemicals and Incoming Paper.

6. Liaise with suppliers and third-party agencies.

7. Provide technical support to the sales and marketing team regarding product specifications, sample requirement & others.

8. Document those methods in standard operating procedures (SOPs) and production records, quality assurance activities with internal reporting and audits.

9. Review and compile documents for Audits (Batch Record: Prod sheet, Quality control test Reports; FG and RM Reports, Mixing records).

10. Ensure that on time calibration program of equipment (mechanical and lab instruments, weighing scales and test weights) are executed.

11. Assist to do in compounding and mixing when Mixer Operator is on leave.

12. Liaise with Overseas factory (China and Indonesia) to ensure that product or service meets specified requirements.

13. Review method validation study reports, ensure proper documentation of findings, and assist in approval or re-validation recommendations. Prepare summary reports of validation activities, results, and recommendations for management review.

14. Investigate validation failures or deviations, identify CAPA, and ensure implementation. Collaborate with cross-functional teams to enhance the efficiency and effectiveness of validation activities.

15. Identify risks in testing methods, implement mitigation strategies, and ensure data integrity during validation to maintain accuracy, reproducibility, and regulatory compliance.

16. Review and approve method validation documentation, ensuring accuracy, completeness, and compliance with quality standards. Maintain up-to-date records of validation activities, deviations, CAPA, and ensure proper version control for all related documents.

17. Provide training on method validation processes and best practices, and support Production, QC and R&D teams in executing protocols and analyzing data accurately.

18. Any other area of responsibilities that the company deems necessary.

A. QUALITY CONTROL

1. Manage product complaints or non-conformances; thoroughly investigate process failure, determine the root cause, and take prompt corrective actions.

2. Conduct physical, physico-chemical test and microbial analysis of finished product.

3. Track the materials (chemicals and fragrance) that are present in the chemical room and know whether additional supplies need to be ordered.

4. Calibrate all equipment for In-house verification Example – pH meter, weighing scale etc. and arrange external calibration with external party.

5. Train new production operators in quality control.

6. Any other area of responsibilities that the company deems necessary.

B. LIAISE WITH SUPPLIERS (Services):

1. DI Water System Maintenance (Requirements: According to Contract): Loop Sterilization, UV-Lamp etc.

2. Complete Water Quality Testing (annual) by External Lab

3. Monitor the consumable supplies from different suppliers for DI Water (Column, filters, gauges).

4. Wet Wipes Monthly External Microbial testing

5. Monitor the annual cleanroom Certification.

6. External Calibration of Equipment

7. Any other area of responsibilities that the company deems necessary.

C. PRODUCT TECHNICAL SUPPORT

1. Support Export Sales and Marketing for preparation of documentation for regulatory use (COA, Ingredient’s list, FG and RM spec etc).

2. Collaborate with development, QC, and regulatory teams to plan, execute, and review method validation protocols, ensuring compliance with applicable guidelines (e.g., ICH, FDA, EMA) and company procedures, while meeting regulatory standards for intended use.

3. Support on the process validation on the manufacturing of the product.

4. Any other area of responsibilities that the company deems necessary.

About the Job

The Quality Department plays a very important role in Cyrus in maintaining the quality management system and driving quality improvements to deliver high quality products for our customers. You will be working closely with the Assistant Quality Manager on Quality Management System (QMS) and suppliers’ management.

Your key responsibilities are as follows:

- Maintain updated and accurate documents and records on ISO 9001, 14001 and 13485 system (includes Quality Manual, Procedures, Work Instructions, Forms, etc.) to ensure system compliance and ready for Management Review.

- Plan and conduct internal and external audits to ensure readiness of all sections for third party certification body, management review and customer audits.

- Coordinate with internal stakeholders to participate in customer or supplier audits for compliance

- Review audit findings and develop action plans to drive continuous improvements.

- Generate and review quality reports on suppliers’ performance and work with suppliers to address non-conforming materials, and drive for continuous improvement.

- Issue and follow up on Supplier Corrective Action Request (SCAR) to suppliers, monitor and review SCAR effectiveness for timely closure.

- Support the qualification of new suppliers to maintain a healthy pipeline of qualified suppliers to meet Cyrus production requirements.

- Maintain and conduct regular review of calibration and preventive maintenance for equipment.

- Responsible for quality issues arising from production and customer feedback, and collaborate with the production team to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation.

- Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance.

- Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness.

- Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements.

Your areas of knowledge and expertise that matter most for this role:

· Diploma in quality management / Engineering / Manufacturing or related field

· Minimum 3 to 5 years of relevant working experience in handling audits and ISO documentation in manufacturing industries.

· Knowledge in Supplier Management

· Knowledge of quality Management Standards such as ISO 9001, 14001, 13485 and ISO 22301.

· Knowledge in Potential Failure Mode Effect Analysis (PFMEA), Control Plans .and Gage Repeatability & Reproducibility (GR&R)

· Familiar with 8D and 5W problem solving methodology.

· Good communication and presentation skills

· Organized and detail oriented.

· Positive attitude with ability to multi task.

· Independent, takes initiatives and able to work with minimum supervision.

· Good team player with good initiatives and ability to work independently.

Authorities and Responsibilities

1. Responsible for providing directives for the Quality Assurance Department in meeting management objectives.
2. Formulate, implement and evaluate quality strategies programs for the company.
3. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with auditors, customers, production and suppliers to meet the quality requirements.
7. Manage sub-contractors for on-time supply of treatment process, as well as meeting technical requirement.
8. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
9. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
10. Review and approve disposition program / action for nonconforming products.
11. Ensure that processes needed for the quality management system are established and implemented.
12. Report to top management on the performance of the quality management system, and note needed improvements.
13. Ensure the promotion of awareness of statutory, regulatory and customer requirements throughout the organization.
14. Ensure and coordinate the implementation of risk assessment and risk control of medical devices

The Quality Assurance Manager plays a crucial role in business by ensuring that products meet certain standards of quality. He/She plans, directs or coordinates quality assurance programs and formulate quality control policies. He/She also works to improve an organisation's efficiency and profitability by reducing waste. He/She prepares and update quality documentation, basing their processes on a recognised standard such as ISO 9000 – Quality Management, published by the International Organisation for Standardisation. He/She supervises teams of inspectors who carry out the detailed assessment of products and their components at different stages of production. He/She recruits and trains supervisors, and provides them with documented quality standards as guidelines for their daily work. He/She also selects quality inspection tools and software to support the inspection team.

Competence Requirements:

• Diploma in Mechanical Engineering / Quality Engineering or equivalent.
• Minimum 6 years of solid experience in Quality Management in similar or related industry and 3 years in management level.
• Good knowledge in implementing and up keeping Quality Management System.
• Strong leadership and good interpersonal skills.
• A team player with strong sense of responsibility to ensure plant effective quality performance.

~ Assist in the implementation of company quality systems.
~ Conduct Quality Assurance audit.
~ Manage cause investigation for non-conformance.
~ Manage company quality systems.
~ Manage departmental activities and deployment.
~ Able to commute between Tuas Plant and Loyang Plant.

Roles and Responsibilities

• Design, maintain and administer the Company's quality training programs.
• Prepare curriculum, training material and recurrent training material to a defined standard.
• Teach formal classroom training courses such as but not limited to policy, procedures, maintenance paperwork, safety, Human Factors, airworthiness regulations, recurrent training and other subjects.
• Revise training curriculum and serve as subject matter expert.
• Design, maintain and administer GE Aviation – Singapore’s Quality System.
• Initiating, updating and maintaining QCWIs and other quality documents as and when required.
• Be in control of the Technical Library. Assure all data are up-to-date and that revisions are distributed to all Engineers affected.
• Facilitate all regulatory and customer audits, work with the appropriate functions in the formulation of corrective actions.
• Support the training and qualification of Certifying Staff.
• Be responsible for the archival of maintenance records. Supervise a team of Technicians in the scanning of maintenance records and ensuring the operability of the scanning equipment.

Required Qualifications

• Degree in Engineering
• 3 or more years of Experience with Quality Systems
• Certified Part 145 or equivilant
• Minimum 2 years of aerospace experience in repair/manufacturing or a quality assurance role.

Desired Characteristics

• Holds a recognized Lead Auditor or Internal Auditor certification.
• Knowledge of Quality Systems/ISO/Aerospace Standards.
• Possess CAAS Air Legislation paper.
• Knowledge of basic engineering and aircraft engine component repair.
• Good auditing experience.
• Good command of written and spoken English.
• Basic knowledge of PC software.
• Good initiative and analytical skills.
• Strong attention to detail and accuracy.
• Ability to communicate at all levels of the organization.
• Demonstrate oral and written communication skills.
• Strong interpersonal and leadership skills.

Responsibilities:

• Perform internal audits as per internal audit schedule in accordance to AS9100, and PART-21 Subpart G requirements OR AS9110C and P-145 requirements
• Manage the qualification and authorization of Technician, Inspector and Signatory (APU)/ Certifying Staff (ARU)
• Facilitate training management, by doing operator audits, manage operator certifications, stamp register control, product authorization matrix, and follow up of re-certification
• Support external audits, (Civil Aviation Authorities, customers and Certification bodies)
• Facilitate and participate in Analysis and Decision committee / Material Review board, related to product non conformity. (APU)
• Manage and update Quality procedures in the Quality Management System
• Validate the qualification of new test equipment
• Participate and contribute in Production Readiness Reviews
• Perform training on Quality related topics for staff
• Manage the internal production or repair quarantine.

Requirements:

• Degree/ Diploma in Quality, Quality Management or Mechanical Engineering or Electrical Engineering or Electronic Engineering or Equivalent
• Minimum 3 years of experience in Avionics Workshop Maintenance Environment/ Electronics Workshop / Mechanical Workshop or production
• Minimum 3 years of Quality Auditing experience
• Experienced in Procedural and Process developments
• Knowledge in: AS9100D (APU), PART-21 Subpart G (APU), Or AS9110C (ARU) Or PART-145 (ARU)

Other Information:

• Working location: Changi
• Working hours: Monday - Friday, 9am - 6pm
• Company transport provided at designated MRT stations

Main Responsibilities:

The candidate will be responsible to support the QA Manager in establishing an independent quality system to monitor compliance with regulatory requirements.

Other tasks include:

• The receipt and control of all relevant regulatory and technical publication documents
• Revising and updating of Quality procedures and work instructions.
• Support all external audits by customers and certification bodies.
• Conduct internal and supplier audits.
• Conduct in-house quality-related trainings.
• Work with Supply Chain on new supplier evaluation and approval.
• Perform annual evaluation of existing suppliers with Supply Chain and update Approved Supplier List.
• Support Operations and Warehouse on customer claims investigation and other quality-related issues.
• Checking existing shelf life database and updating shelf life information in SAP for specific part numbers.
• Issuing of shelf life labels for items with expiry in warehouse.
• Reviewing and preparing of all Non-Conformance Reports (NCR) for closure.
• Preparation of quality / KPI related reports.
• Updating of NCR Master-list and E-filing of all warehouse NCR records in server.
• Updating of training register and personnel training records.
• Review and inspect aircraft cabin and avionics parts at warehouse when required.
• Assist in the company annual stock take if required
• Undertaking new improvement projects to improve process quality.
• Any ad-hoc tasks assigned by the QA Manager

Requirements:

• Degree / Diploma in Mechanical / Manufacturing / Aerospace Engineering with 3 to 6 years of relevant work experience, preferably in the Aviation industry.
• Knowledge of AS9100/9110/9120 standards and FAA/EASA/CAAS/CAAC part 145 requirements is highly preferred.
• Knowledge in the applications of MS Word, Excel, PowerPoint and Access will be advantageous.
• Should possess effective communication, interpersonal and problem solving skills

Job Description:

1. Supplier Quality Management

• Develop and implement supplier quality management programs.
• Conduct regular audits and assessments of supplier facilities to ensure compliance with quality standards and regulatory requirements.
• Evaluate and approve new suppliers based on quality performance and capability assessments.

2. Quality Assurance and Control

• Establish and maintain incoming material inspection processes and criteria.
• Monitor and report on supplier performance, including quality metrics, delivery performance, and corrective actions.
• Work with suppliers to develop and implement corrective action plans to address quality issues.

3. Continuous Improvement

• Identify opportunities for continuous improvement in supplier quality processes and systems.
• Lead initiatives to reduce defect rates and improve overall supplier performance.
• Collaborate with suppliers on process improvements and quality control enhancements.

4. Collaboration and Communication

• Serve as the primary point of contact for all supplier-related quality issues.
• Work closely with internal teams, including engineering, production, and procurement, to address quality concerns and improve supplier relationships.
• Facilitate effective communication and collaboration between suppliers and internal stakeholders.

5. Documentation and Compliance

• Ensure all supplier quality documentation is accurate, complete, and up-to-date.
• Maintain records of supplier audits, inspection results, and corrective actions.
• Ensure compliance with industry standards, customer requirements, and regulatory guidelines.

6. Training and Development

• Provide training and guidance to suppliers on quality standards, processes, and requirements.
• Mentor junior team members and support their professional development.

Job Requirements:

• Bachelor’s degree in Engineering, Quality Management, or a related field.
• Minimum of 7 years of experience in supplier quality engineering within the semiconductor manufacturing industry.
• Strong knowledge of semiconductor manufacturing processes and quality standards.
• Proven experience in conducting supplier audits and implementing corrective actions.
• Excellent problem-solving, analytical, and organizational skills.
• Strong communication and interpersonal skills, with the ability to work effectively with suppliers and internal teams.
• Preferred Skills: Certification in quality management (e.g., CQE, Six Sigma, Lean Manufacturing) is highly desirable.
• Proficiency in quality management tools and software.
• Experience with regulatory requirements and standards specific to the semiconductor industry.

Job Description

The successful candidate will be part of the Safety, Security and Quality (SSQ) Development department. He/ She will manage SSQ’s systems, provide user support for systems and IT related matters, and work collaboratively with users to enhance existing systems and on development of new systems. Additionally, the incumbent will also be responsible for coordinating the annual finance and IT budgeting exercise for SSQ and for budget tracking and reporting as required.

Key Responsibilities

1) IT Project Planning & Budgeting

• Prepare, track and manage the IT project plan and budget for SSQ
• Co-ordinate, track and manage the SSQ Finance annual budget and reporting

2) IT & Systems Support

• Provide support for SSQ’s systems
• Access management for SSQ’s systems
• Maintain documentation on SSQ’s system processes
• Act as a liaison between users and ITD/ vendors for system related matters
• Co-ordinate IT asset and user ID recertification exercises
• Secretariat for divisional IT meetings

3) Systems Development & Project Management

• Work with users on business process re-engineering to streamline SSQ’s processes
• Work with SSQ users and other business units on business requirements and solutions for new or existing systems.
• Conduct user acceptance testing (UAT) to ensure the system/ enhancements meet the specified requirements.
• Change management and system implementation

4) Technology Awareness

• Keep abreast of key and emerging technologies to leverage on digital
• Engage sections within SSQ to discover opportunities where technology can be exploited

Requirements

• IT related university degree. Fresh graduates are welcome to apply.
• Experience in business requirements analysis, systems support & development, and project management
• Knowledge of Tableau and/ or Python would be advantageous but not compulsory
• Strong inter-personal and communication (verbal & written) skills
• Good planning and analytical skills
• Critical Thinker and Problem Solver
• Technologically Savvy
• Possess initiative, self-driven and able to work independently

• Arrange shipment of raw materials from vendors, intercompanies or finished products to customers ensuring smooth delivery of shipments.
• Liaise and coordinate with freight forwarders and freight insurance for shipments.
• Prepare certificate of Origin for outgoing goods.
• Coordinate with warehouse on receiving, transfer of goods or delivery of products.
• Prepare and ensure accuracy of import and export documentation.

Authorities and Responsibilities

1. Responsible for providing directives for the Quality Assurance Department in meeting management objectives.
2. Formulate, implement and evaluate quality strategies programs for the company.
3. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with auditors, customers, production and suppliers to meet the quality requirements.
7. Manage sub-contractors for on-time supply of treatment process, as well as meeting technical requirement.
8. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
9. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
10. Review and approve disposition program / action for nonconforming products.
11. Ensure that processes needed for the quality management system are established and implemented.
12. Report to top management on the performance of the quality management system, and note needed improvements.
13. Ensure the promotion of awareness of statutory, regulatory and customer requirements throughout the organization.
14. Ensure and coordinate the implementation of risk assessment and risk control of medical devices

The Quality Assurance Manager plays a crucial role in business by ensuring that products meet certain standards of quality. He/She plans, directs or coordinates quality assurance programs and formulate quality control policies. He/She also works to improve an organisation's efficiency and profitability by reducing waste. He/She prepares and update quality documentation, basing their processes on a recognised standard such as ISO 9000 – Quality Management, published by the International Organisation for Standardisation. He/She supervises teams of inspectors who carry out the detailed assessment of products and their components at different stages of production. He/She recruits and trains supervisors, and provides them with documented quality standards as guidelines for their daily work. He/She also selects quality inspection tools and software to support the inspection team.

Competence Requirements:

• Diploma in Mechanical Engineering / Quality Engineering or equivalent.
• Minimum 6 years of solid experience in Quality Management in similar or related industry and 3 years in management level.
• Good knowledge in implementing and up keeping Quality Management System.
• Strong leadership and good interpersonal skills.
• A team player with strong sense of responsibility to ensure plant effective quality performance.

~ Assist in the implementation of company quality systems.
~ Conduct Quality Assurance audit.
~ Manage cause investigation for non-conformance.
~ Manage company quality systems.
~ Manage departmental activities and deployment.
~ Able to commute between Tuas Plant and Loyang Plant.

Authorities and Responsibilities

1. Responsible for providing directives for the Quality Assurance Department in meeting management objectives.
2. Formulate, implement and evaluate quality strategies programs for the company.
3. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with auditors, customers, production and suppliers to meet the quality requirements.
7. Manage sub-contractors for on-time supply of treatment process, as well as meeting technical requirement.
8. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
9. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
10. Review and approve disposition program / action for nonconforming products.
11. Ensure that processes needed for the quality management system are established and implemented.
12. Report to top management on the performance of the quality management system, and note needed improvements.
13. Ensure the promotion of awareness of statutory, regulatory and customer requirements throughout the organization.
14. Ensure and coordinate the implementation of risk assessment and risk control of medical devices

The Quality Assurance Manager plays a crucial role in business by ensuring that products meet certain standards of quality. He/She plans, directs or coordinates quality assurance programs and formulate quality control policies. He/She also works to improve an organisation's efficiency and profitability by reducing waste. He/She prepares and update quality documentation, basing their processes on a recognised standard such as ISO 9000 – Quality Management, published by the International Organisation for Standardisation. He/She supervises teams of inspectors who carry out the detailed assessment of products and their components at different stages of production. He/She recruits and trains supervisors, and provides them with documented quality standards as guidelines for their daily work. He/She also selects quality inspection tools and software to support the inspection team.

Competence Requirements:

• Diploma in Mechanical Engineering / Quality Engineering or equivalent.
• Minimum 6 years of solid experience in Quality Management in similar or related industry and 3 years in management level.
• Good knowledge in implementing and up keeping Quality Management System.
• Strong leadership and good interpersonal skills.
• A team player with strong sense of responsibility to ensure plant effective quality performance.

~ Assist in the implementation of company quality systems.
~ Conduct Quality Assurance audit.
~ Manage cause investigation for non-conformance.
~ Manage company quality systems.
~ Manage departmental activities and deployment.
~ Able to commute between Tuas Plant and Loyang Plant.

· Create quality inspection plans and work instructions for incoming, In-process or outgoing parts to ensure that components and products conform to specifications.

· Define training plan, train QC supervisors, QC technicians and QC inspectors to perform dimensional/functional inspection in accordance to work instructions.

· Perform First Article Inspection for newly inducted materials and parts.

· Perform qualification validation of equipment, processes and test methods

· Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance requirements.

· Participate in Process Failure Mode Effect and Analysis team to mitigate product risk arising from manufacturing

· Perform complaint handling, investigate root cause of complaint and perform Corrective Action and Preventive Action as necessary.

· Handle non-conformances and perform disposition of rejected parts, trend yield and rejects, investigate root cause of non-conformance and perform Corrective Action and Preventive Action as necessary.

· Maintain the manufacturing environment and perform gowning as necessary when working in controlled manufacturing environment e.g. clean room.

· Initiate and/or execute engineering changes in compliance with Engineering Change Control procedures

· Participate in external and internal audit to ensure company quality system is effective

· Participate in continuous improvement programs such as 6S program, yield improvement projects etc.

· Support new production introduction as a team member representing quality

· Perform other tasks as assigned by the supervisor

· Work experience as a quality engineer in a medical device manufacturing environment

(Candidates with Diploma in Engineering. Science or equivalent can be considered for Assistant Quality Engineer position. Candidates with more experience can be considered for Senior Quality Engineer position)

· Experience with qualification validation of equipment, processes and test methods for new product introduction

Job Responsibilities:

• Read telex and action accordingly.
• Inform apron of aircraft changes, edit in CRO Editor and send CALL BACK to all concerned.
• Ensure requests for SIA stretcher/ Supplementary Oxygen kit and update in stretcher/ Supplementary Oxygen Kit chart-update the systems.
• Update flight observer chart and fax to IGO and provide a copy to MAINTROL.
• Any last-minute aircraft change less than 2 hours to STD, CRO will call refuellers directly and inform of aircraft change.
• Prepare SQ and Scoot (including Line Station) Delay reports.

Job Requirement:

• Minimum ITE Certificate in any discipline
• Familiar with Microsoft excel and SAP
• Experience in performing coordination, data entry, and generating reports
• Able to quick response to any last minute’s aircraft changes and react promptly
• Possess good communication skills
• Able to work under pressure
• Comfortable with rotating shift (12hrs Morning & Night) pattern based on 2 days’ work and follow by 2 days off work arrangement.

JOBSCOPE OVERVIEW

1. Represent QA/QC department in 2G Management Meetings or other meetings required by Directors.

2. Create and maintain standard operating procedure (SOP’s), protocols, guidelines that ensure consistency and efficiency throughout the QA cycle.

3. Acts as Committee of all ISO audits.

4. Supervise and manage QA/QC team and interns.

5. Conduct physico-chemical and microbiological test for Chemicals and Incoming Paper.

6. Liaise with suppliers and third-party agencies.

7. Provide technical support to the sales and marketing team regarding product specifications, sample requirement & others.

8. Document those methods in standard operating procedures (SOPs) and production records, quality assurance activities with internal reporting and audits.

9. Review and compile documents for Audits (Batch Record: Prod sheet, Quality control test Reports; FG and RM Reports, Mixing records).

10. Ensure that on time calibration program of equipment (mechanical and lab instruments, weighing scales and test weights) are executed.

11. Assist to do in compounding and mixing when Mixer Operator is on leave.

12. Liaise with Overseas factory (China and Indonesia) to ensure that product or service meets specified requirements.

13. Review method validation study reports, ensure proper documentation of findings, and assist in approval or re-validation recommendations. Prepare summary reports of validation activities, results, and recommendations for management review.

14. Investigate validation failures or deviations, identify CAPA, and ensure implementation. Collaborate with cross-functional teams to enhance the efficiency and effectiveness of validation activities.

15. Identify risks in testing methods, implement mitigation strategies, and ensure data integrity during validation to maintain accuracy, reproducibility, and regulatory compliance.

16. Review and approve method validation documentation, ensuring accuracy, completeness, and compliance with quality standards. Maintain up-to-date records of validation activities, deviations, CAPA, and ensure proper version control for all related documents.

17. Provide training on method validation processes and best practices, and support Production, QC and R&D teams in executing protocols and analyzing data accurately.

18. Any other area of responsibilities that the company deems necessary.

A. QUALITY CONTROL

1. Manage product complaints or non-conformances; thoroughly investigate process failure, determine the root cause, and take prompt corrective actions.

2. Conduct physical, physico-chemical test and microbial analysis of finished product.

3. Track the materials (chemicals and fragrance) that are present in the chemical room and know whether additional supplies need to be ordered.

4. Calibrate all equipment for In-house verification Example – pH meter, weighing scale etc. and arrange external calibration with external party.

5. Train new production operators in quality control.

6. Any other area of responsibilities that the company deems necessary.

B. LIAISE WITH SUPPLIERS (Services):

1. DI Water System Maintenance (Requirements: According to Contract): Loop Sterilization, UV-Lamp etc.

2. Complete Water Quality Testing (annual) by External Lab

3. Monitor the consumable supplies from different suppliers for DI Water (Column, filters, gauges).

4. Wet Wipes Monthly External Microbial testing

5. Monitor the annual cleanroom Certification.

6. External Calibration of Equipment

7. Any other area of responsibilities that the company deems necessary.

C. PRODUCT TECHNICAL SUPPORT

1. Support Export Sales and Marketing for preparation of documentation for regulatory use (COA, Ingredient’s list, FG and RM spec etc).

2. Collaborate with development, QC, and regulatory teams to plan, execute, and review method validation protocols, ensuring compliance with applicable guidelines (e.g., ICH, FDA, EMA) and company procedures, while meeting regulatory standards for intended use.

3. Support on the process validation on the manufacturing of the product.

4. Any other area of responsibilities that the company deems necessary.

Responsibilities:

• Perform internal audits as per internal audit schedule in accordance to AS9100, and PART-21 Subpart G requirements OR AS9110C and P-145 requirements
• Manage the qualification and authorization of Technician, Inspector and Signatory (APU)/ Certifying Staff (ARU)
• Facilitate training management, by doing operator audits, manage operator certifications, stamp register control, product authorization matrix, and follow up of re-certification
• Support external audits, (Civil Aviation Authorities, customers and Certification bodies)
• Facilitate and participate in Analysis and Decision committee / Material Review board, related to product non conformity. (APU)
• Manage and update Quality procedures in the Quality Management System
• Validate the qualification of new test equipment
• Participate and contribute in Production Readiness Reviews
• Perform training on Quality related topics for staff
• Manage the internal production or repair quarantine.

Requirements:

• Degree/ Diploma in Quality, Quality Management or Mechanical Engineering or Electrical Engineering or Electronic Engineering or Equivalent
• Minimum 3 years of experience in Avionics Workshop Maintenance Environment/ Electronics Workshop / Mechanical Workshop or production
• Minimum 3 years of Quality Auditing experience
• Experienced in Procedural and Process developments
• Knowledge in: AS9100D (APU), PART-21 Subpart G (APU), Or AS9110C (ARU) Or PART-145 (ARU)

Other Information:

• Working location: Changi
• Working hours: Monday - Friday, 9am - 6pm
• Company transport provided at designated MRT stations

Job Description

Key Responsibilities

• Develops and applies quality standards in accordance with company and customer requirements. Develops and conducts related tests.
• Designs and implements methods and procedures for inspecting, testing, and evaluating the precision and accuracy of products and/ or production equipment.
• Develops methods and parameters, project methodology and/ or project proposals.
• Develops and uses procedures. Prepares documentation for inspection/ testing procedures. Recommends corrective action for procedural, product, or process deficiencies.
• Analyze operational data; Develop and implement recommendations. Participates in and may lead audits.
• Evaluates work methods, procedures and policies. Tracks progress of qualification status, reviews reliability test results, determines disposition of non-compliant products, reviews and releases qualification packs
• Utilizes drawings, specifications, industry standards, and sketches, adapting inspection measuring devices and procedures when necessary. Read and interpret technical drawings and specification requirements.
• Reduces qualification cycle time and cost while still meeting quality performance requirements.

Requirements:

• Relevant experiences in customer quality role
• Prior industry experiences in manufacturing, electronics or semiconductor
• Ability to support different time zone when required
• Good communication and interpersonal skills

• Manage Quality Management System (QMS)
• Able to lead a team of QA Engineers
• Manage Customer/Process Audit
• Well versed in CpK, Gage R & R, PPAP, 8D & 5 Why methodology
• Manage First Article Planning, CMM, CMM program, Visual Inspection program and other measurement equipment
• Manage Internal and External Corrective Action Reports (CAR)
• Manage Departmental KPI
• Manage Suppliers’ Qualification, Performance Monitoring, Quality Management and Audit and Disqualification Program
• Coordinate with Operation in ensuring Quality of production’s outgoing products meet Customers' Requirement
• Support Operation through establishment of Operations Standard, Process and Quality Control Plan
• Establishment of Product Quality Standard with Sales and Customers
• Support Operation through establishment of Operations Standard, Process and Quality Control Plan
• Any other ad-hoc duties assigned
• Able to read technical drawings, knowledgeable in MS Excel and work experience in QMS, GD&T and CMM
• Outstanding communication skills
• Minimum Diploma in Mechanical Engineering or related field
• Minimum 5 years of QC / QA experience in precision engineering manufacturing environment

· Manage supplier quality performance.

· Manage suppliers to ensure the part supply to the factory meet the quality requirement.

· Manage supplier First-Article processes and part qualification.

· Ensure supplier quality records are updated promptly.

· Responsible for ensuring that Supplier Quality Issue is resolved.

· Conduct External audit to ensure conformance to specified requirement.

· Support Internal, 3rd Party & Customer System audits.

· Report Supplier Quality Performance for management reviews.

· Support product/process qualification when necessary.

Skills Desired:

· Vendor management experience is preferred.

· Good understanding of quality management system & tools

· Self-motivated and deadline oriented.

Join Our Team as a Baker!

We are seeking a motivated and detail-oriented Baker to join our dynamic team. In this role, you will be responsible for ensuring the highest quality standards for our sandwich loaves, breakfast breads, and confectionery items.

The ideal candidate will have entry-level to mid-level experience in baking and a passion for leading and mentoring a team. You will work on a production line with industrial-sized machines, conducting quality checks, and ensuring compliance with food safety standards.

Overview:

• Oversee quality checks for baked goods.
• Lead and instruct team members on best practices.
• Participate in baking processes as needed.
• Perform basic stock take and inventory management.

Key Responsibilities:

• Conduct quality checks on sandwich loaves, spread bread and confectionery products during production to ensure consistency and adherence to standards.
• Record and maintain quality checklists and other documentation accurately.
• Perform basic stock take and inventory management to ensure adequate supplies for production.
• Operate and monitor industrial-sized baking equipment and machinery.
• Collaborate with the production team to ensure smooth operations and efficient workflow.
• Assist in maintaining a clean and organized work environment, adhering to food safety and workplace safety protocols.
• Oversee the production line, ensuring that all products meet company specifications.
• Support the team in troubleshooting and resolving any production issues that may arise.
• Train and guide junior staff members on baking techniques, quality control procedures and best practices.
• Participate in team meetings and contribute to continuous improvement initiatives.

Job Requirements:

• Certificate in baking or a higher qualification; candidates with equivalent experience and a willingness to learn are encouraged to apply.
• Basic knowledge of bread and pastry baking processes and quality control techniques.
• Experience working with industrial-sized baking equipment is preferred.
• Ability to work in a warm and humid environment, with some heavy lifting required.
• Strong attention to detail, time management skills, and the ability to remain calm under pressure.
• Excellent teamwork skills, with the ability to instruct and lead a team.
• Strict adherence to food safety and workplace safety standards.
• Availability to work early morning and morning shifts, including weekends on a rotational basis.

The Quality Control Clerk plays a vital role in ensuring the quality of products and processes by performing various administrative and inspection tasks. This position requires attention to detail, organizational skills, and ability to work in a fast-paced environment.

Administrative Tasks

1. Maintain accurate and up-to-date quality records, files, and databases.

2. Assist in document control, including revising and distributing quality procedures and policies.

Inspection and Testing

1. Conduct visual inspections of products, materials, and packaging.

2. Verify simple product conformity to specifications, drawings, and standards.

3. Perform sampling inspections and testing as required.

4. Document inspection results, nonconformities, and corrective actions.

Quality Control Processes

1. Identify and report quality issues, defects, or nonconformities.

Communication and Collaboration

1. Liaise with production, procurement, and engineering teams to resolve quality issues.

2. Communicate quality requirements and standards to suppliers and vendors.

3. Collaborate with internal stakeholders to improve quality processes.

REQUIREMENTS

Education level:

1. Min. Higher Nitec/Diploma level ME/Mechatronic or it relevant.

Experience level:

1. 1-2 years of experience in quality control, inspection, or related field.

2. Experience in manufacturing, aerospace, automotive, or medical device industries preferred.

Skills:

1. Strong attention to detail and organizational skills.

2. Excellent communication, interpersonal, and problem-solving skills.

3. Familiarity with quality management systems (e.g., ISO 9001, AS9100).

4. Proficient in MS Office.

Certifications:
1. Certified Quality Inspector (CQI) or Certified Quality Technician (CQT) certification desirable.

Physical Requirements:

1. Ability to work in a manufacturing environment.

2. Lift up to 12kg occasionally.

3. Stand, walk, or sit for extended periods.

Job Description:

1. Supplier Quality Management

• Develop and implement supplier quality management programs.
• Conduct regular audits and assessments of supplier facilities to ensure compliance with quality standards and regulatory requirements.
• Evaluate and approve new suppliers based on quality performance and capability assessments.

2. Quality Assurance and Control

• Establish and maintain incoming material inspection processes and criteria.
• Monitor and report on supplier performance, including quality metrics, delivery performance, and corrective actions.
• Work with suppliers to develop and implement corrective action plans to address quality issues.

3. Continuous Improvement

• Identify opportunities for continuous improvement in supplier quality processes and systems.
• Lead initiatives to reduce defect rates and improve overall supplier performance.
• Collaborate with suppliers on process improvements and quality control enhancements.

4. Collaboration and Communication

• Serve as the primary point of contact for all supplier-related quality issues.
• Work closely with internal teams, including engineering, production, and procurement, to address quality concerns and improve supplier relationships.
• Facilitate effective communication and collaboration between suppliers and internal stakeholders.

5. Documentation and Compliance

• Ensure all supplier quality documentation is accurate, complete, and up-to-date.
• Maintain records of supplier audits, inspection results, and corrective actions.
• Ensure compliance with industry standards, customer requirements, and regulatory guidelines.

6. Training and Development

• Provide training and guidance to suppliers on quality standards, processes, and requirements.
• Mentor junior team members and support their professional development.

Job Requirements:

• Bachelor’s degree in Engineering, Quality Management, or a related field.
• Minimum of 7 years of experience in supplier quality engineering within the semiconductor manufacturing industry.
• Strong knowledge of semiconductor manufacturing processes and quality standards.
• Proven experience in conducting supplier audits and implementing corrective actions.
• Excellent problem-solving, analytical, and organizational skills.
• Strong communication and interpersonal skills, with the ability to work effectively with suppliers and internal teams.
• Preferred Skills: Certification in quality management (e.g., CQE, Six Sigma, Lean Manufacturing) is highly desirable.
• Proficiency in quality management tools and software.
• Experience with regulatory requirements and standards specific to the semiconductor industry.

About the Job

The Quality Department plays a very important role in Cyrus in maintaining the quality management system and driving quality improvements to deliver high quality products for our customers. You will be working closely with the Assistant Quality Manager on Quality Management System (QMS) and suppliers’ management.

Your key responsibilities are as follows:

- Maintain updated and accurate documents and records on ISO 9001, 14001 and 13485 system (includes Quality Manual, Procedures, Work Instructions, Forms, etc.) to ensure system compliance and ready for Management Review.

- Plan and conduct internal and external audits to ensure readiness of all sections for third party certification body, management review and customer audits.

- Coordinate with internal stakeholders to participate in customer or supplier audits for compliance

- Review audit findings and develop action plans to drive continuous improvements.

- Generate and review quality reports on suppliers’ performance and work with suppliers to address non-conforming materials, and drive for continuous improvement.

- Issue and follow up on Supplier Corrective Action Request (SCAR) to suppliers, monitor and review SCAR effectiveness for timely closure.

- Support the qualification of new suppliers to maintain a healthy pipeline of qualified suppliers to meet Cyrus production requirements.

- Maintain and conduct regular review of calibration and preventive maintenance for equipment.

- Responsible for quality issues arising from production and customer feedback, and collaborate with the production team to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation.

- Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance.

- Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness.

- Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements.

Your areas of knowledge and expertise that matter most for this role:

· Diploma in quality management / Engineering / Manufacturing or related field

· Minimum 3 to 5 years of relevant working experience in handling audits and ISO documentation in manufacturing industries.

· Knowledge in Supplier Management

· Knowledge of quality Management Standards such as ISO 9001, 14001, 13485 and ISO 22301.

· Knowledge in Potential Failure Mode Effect Analysis (PFMEA), Control Plans .and Gage Repeatability & Reproducibility (GR&R)

· Familiar with 8D and 5W problem solving methodology.

· Good communication and presentation skills

· Organized and detail oriented.

· Positive attitude with ability to multi task.

· Independent, takes initiatives and able to work with minimum supervision.

· Good team player with good initiatives and ability to work independently.

Product quality review associated with the manufacturing process. Impacts departmental operations and responsible for planning/execution. The role has some autonomy but is focused on execution of activities within an operating discipline covered by standard functional practices and procedures. Some judgment may be required but this is typically with guidance.

Roles and Responsibilities:

• Review and approve repair processes for Component Repair New Product Introduction (NPI)
• Follow up to resolve technical concerns raised and follow through till approval is obtained.
• Participate in Lean initiatives and engage Six Sigma tools for NPI process improvements.
• Ensure that products and services perform according to quality standards and that manufacturing processes are capable and qualified.
• Developing in-depth knowledge of a technical discipline. Uses prior experience and acquired technical expertise to execute policy/strategy.
• In-depth understanding of key business drivers; uses this understanding to accomplish own work. In-depth understanding of how work of own team integrates with other teams and contributes to the area.
• Uses some level of judgment and has ability to propose different solutions outside of set parameters but with guidance. Uses prior experience and on-the-job training to solve straightforward tasks. Has access to technical skills and analytic thinking required to solve problems. May use multiple internal sources outside of own team to arrive at decisions.

Required Qualifications:

• Bachelor’s degree in Engineering from an accredited university or college (or equivalent)
• This role requires advanced experience (5 to 7 years) in the Manufacturing & Production Quality Assurance.
• Knowledge of general aviation legislation and quality systems (ISO9001/AS9100)
• Holds a recognized Lead Auditor or Internal Auditor certification

Desired Characteristics:

• Strong oral and written communication skills.
• Ability to document, plan, market, and execute programs.
• Established project management skills.
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes, critical thinker
• Knowledge of manufacturing special processes (heat treat, welding, shot peening, coating, chemical processes, non-conventional machining)

Product quality review associated with the manufacturing process. Impacts quality of own work and the work of others on the team. Executes standard operational/technical tasks typically subject to instructions and work routines. There is latitude to rearrange the sequence to complete task/duties based on changing work situations.

Essential Responsibilities:

• Partner and engage with Operations and Engineering teams to facilitate and drive robust RCCA in order to reduce Customer Disruptions and improve customer satisfaction.
• Partner and engage with Operations and Engineering teams to facilitate and drive robust RCCA in order to reduce Workmanship/ WIP Losses, Rework and Turnbacks, and improve FTY, delivery performance, and COQ.
• Partner and engage with Operations/Engineering teams to facilitate and drive avoidance of repair-induced Departures.
• Track and monitor quality metrics (Yield, Losses, Escapes), and perform trend analysis to identify systemic improvement opportunities.
• Drive engagement & training of inspectors and certifying staff to ensure disposition & inspection
• Drive engagement and participation in Lean and quality improvement across the site.
• Drive and promote Quality culture and participate in EHS and other shop initiatives as necessary.
• Act as focal point for all quality matters and clarifications for the business unit.
• Support internal audits and perform CAR verifications.
• Support, review and approval of New Product Introduction (NPI) and Process Change Notice (PCN) initiatives.

Qualifications / Requirements:

• Bachelor’s degree in Mechanical/Aerospace/Material Engineering from an accredited university or college (or equivalent)
• Candidate with relevant aerospace experience in repair/manufacturing processes or quality assurance role has added advantage.
• Fresh graduates are welcome to apply as well
• Good command of written and spoken English
• Basic proficiency with of PC tools and software (e.g. Microsoft Office)

Desired Characteristics:

• Knowledge of general aviation legislation and quality systems (AS9100)
• Knowledge of manufacturing processes (heat treat, welding, shot peening, coating, chemical processes, non-conventional machining)
• Demonstrated work experience in reading and interpreting blueprints or engineering specifications;
• Knowledge of repair/manufacturing fundamentals
• Knowledge of Lean and Six Sigma quality concepts and tools.
• Knowledge of RCCA/HF techniques
• Knowledge of Lean concepts and tools.
• Strong attention to detail and accuracy
• Humble: respectful, receptive, agile, eager to learn​
• Transparent: shares critical information, speaks with candor, contributes constructively​
• Focused: quick learner, strategically prioritizes work, committed ​
• Leadership ability: strong communicator, decision-maker, collaborative​
• Problem solver: analytical-minded, challenges existing processes, critical thinker

Responsible for Metallurgical and Calibration Laboratories support to the business units and ensuring quality of products shipped for the respective product cells assigned.

Essential Responsibilities:

• Provide supervisory and technical oversight of Metallurgical and Calibration Laboratories
• Responsible for safe operation of laboratories.
• Ensure training and competency of laboratory personnel to required standards.
• Ensure the compliance of laboratory processes to regulatory, industry and GE standards.
• Drive continual improvement of the laboratory in quality, operational effectiveness, productivity, and cost to support business metric improvements.
• Monitor laboratories utilization and efficiency to ensure manpower optimization.
• Manage and drive quality of responsible product cells assigned.
• Engage with Operational and Engineering teams to facilitate and drive robust corrective actions to improve quality, reduce workmanship / rework losses.
• Track and monitor quality metrics (Yield, Losses, Escapes), and perform trend analysis to identify systemic improvement quality opportunities.
• Support review of technical data change, approval of process change and new product introduction.
• Perform quality auditing as necessary.

Qualifications / Requirements:

• Bachelor’s degree in Mechanical / Aerospace / Material Engineering from an accredited university or college (or equivalent)
• Minimum 2 years of experience in either calibration or metallurgy laboratory functions
• Candidate conversant with laboratory quality systems (ISO17025) has added advantage.
• Knowledge of aviation MRO 145 standards has added advantage.

Desired Characteristics / Knowledge:

• Knowledge of Lean concepts and tools.
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes, critical thinker