Responsibilites:

• To plan, develop and implement the organizational strategy and framework for patients’ relations and positive experience in the patients' journey of care
• To oversee and be responsible for the communications and patients’ relations matters of through befriending and building of a strong rapport with the patients and their family.
• To collaborate with HODs and line staff to operationalize the patients experience strategy.
• To provide expertise and resources in educating the Head of Departments and line staff in the philosophy and techniques of patients experience improvement.
• To set benchmarks/targets for evaluating the effectiveness of the patients’ relations services and programmes for the purpose of continuous improvement.

Principal Responsibilities

1) Patients Relations Engagements

• To establish contact with patients and their family (next-of-kin or spokesperson or designated caregiver) at the point of referral (hospital tour) or upon admission to the wards.
• To be the point person of the hospital for the patients and their family.
• To implement workflow to ensure a positive experience at every touch point with patients and their family.
• To identify caregivers stress and discern sensitive issues and offer counsel/suggestions to solve the problem or to handle the situation.
• In any crisis situation to advise and support the Head of Department and the staff on the appropriate approach and action to be taken to diffuse anger and tension, at the same time relate to the patient and his/her family to offer empathy and counselling, where necessary, to calm the situation. Offer practical solutions and support to the patient and the family where caregiver stress has been identified.
• Identify and assist/support staff andHead of Departments who are struggling with patients’ relations and communication issues.
• To supervise, train and mentor the team of Ward Ambassadors who are part of the Patients Relations Team.
• To review and assist in handling feedback and complaints received through the Patients Feedback Form with appropriate (verbal/written) responses.

2) Patients Experience Programmes

• To work with Corporate Communications, Pastoral Care Services and Nursing in organizing patients’ engagement events.
• To develop programmes and events to promote patients’ engagement and improve patients experience.

3) Family/Caregivers Engagement

• To proactively identify caregivers stress and engage caregivers in conversations for the purpose of offering empathy and support, solutions and resources that will enable them to cope better.
• To collaborate with external agencies like Caregivers Alliance in supporting the caregivers and post discharge follow up.
• To participate in ward processes relevant to patients’ relations and experience.

Secondary Responsibilities

• To provide training in dementia care to staff as well as to caregivers.
• To carry out duties and responsibilities that may be assigned from time to time.

Job Requirements

• min. Diploma/Degree in Public relations, Communications and Counselling related field of study
• Prior 3-4 years of relevant working experience in hospitality or healthcare public relations or caregiver support and counselling.
• Minimum 4-5 years relevant experience in a managerial role.
• Prior patient relations work experience from Healthcare/Social Service industry
• Has excellent interpersonal and communication skills.

Interested applicants, please email your updated CV to [email protected] or WA 97527630 for more information.

We regret to inform that only shortlisted candidates will be contacted.

EA Personnel No: R23116144

EA Personnel Name: Lim Ruo Yi, Rachel

Company Registration Number: Recruit Express Pte Ltd (99C4599)

• The Senior Supplier Quality Specialist will reports to the Supplier Quality Supervisor will be responsible to support the development and maintenance of Supplier Quality Management business processes to comply with all applicable regulatory requirements and Quality Policies and Procedures.
• You will ensure oversight on the site’s supplier quality and material release processes are executed in accordance to Quality Policies and Procedures

Major Responsibilities:

• Provide Leadership for the Supplier Quality team as a senior specialist in the absence of the manager and Supervisor
• Ensure compliance with applicable policies, processes and procedures, contributing to the execution of strategies and oversight of Supplier Quality programs
• Execute and provide oversight on procedures to ensure that incoming materials including raw materials and commodities received at our Company to meet approved company policies and processes.
• Manage investigations arising from materials nonconformity with cross functional team.
• Serves as the primary contact to review and follow up on Supplier Qualification documentation (e.g. Approved Supplier Lists, Quality Questionnaires, customer complaints, Supplier packages etc.) and activities (e.g. supplier audits, supplier review, supplier change notification etc.)
• Prepare, maintain and facilitate review of the GMP documentations (Quality Technical Agreement and Internal Quality Technical Agreement)
• Coordinate site supplier quality issues (such as deviations), audit assessments and subsequent follow-up actions.
• Support global supplier quality team initiatives or other site improvement projects. Perform review/audit of Incoming material inspection package which includes receiving, sampling and testing compliance. Completion of Incoming Raw Material checks and release and the administration of Quality Logs, e.g. QA Hold.Review / Approve material master data set up for new material introduction.

Requirements

• Min Diploma / Degree in any science / engineering courses
• Min 2 years of Supplier quality exp from Pharma industry

$4K to $5K

office hours

Pharma MNC

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Our client is a leading logistics company. They are looking for a Senior Quality Executive to assist their Quality team for the next phrase of their business. They are located at West of Singapore– easily accessible. The Senior Quality Executive is responsible for:

Duties

• Establish, update, and uphold the Quality and Environmental Management System (QEMS) in alignment with ISO 9001:2015, collaborating with stakeholders to create and revise relevant procedures.
• Track quality trends and performance metrics, ensuring continuous improvement within the organization.
• Manage internal and external ISO 9001:2015 certification processes, audits, and compliance to meet all required standards and objectives.
• Communicate quality assurance strategies and processes across the organization through quality programs, training, and awareness initiatives.
• Lead monthly quality review meetings, generate performance reports, and conduct site inspections to ensure compliance with quality standards.
• Participate in customer audits, lead investigations into quality issues, manage supplier onboarding, and address improvement areas based on non-conformities.

Requirements

• Min Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• Min 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

Our client is a global leader in the pharmaceutical industry, dedicated to improving health and well-being through innovative medicines and healthcare solutions.

They seek a Regional QA Specialist to lead regional internal and external audits for their external/contract manufacturers and suppliers, ensuring compliance with regulatory standards and upholding high-quality pharmaceutical, medical devices guidelines and requirements.

Key Points:

• New headcount with growing, reputable pharma MNC
• 5-day work in CDB area with hybrid work arrangements, near MRT
• Overseas travelling opportunities with attractive salary and perks

Responsibilities:

Uphold quality standards and activities of regional external/contract manufacturing organisations, ensure adherence to relevant international regulations, guidelines and industry practises alongside company compliance requirements.

• Perform internal and external audits (supplier or EMO/CMO) audits and assessments to evaluate compliance with quality standards and contractual requirements.
• Monitor EMO/supplier qualification, assessment and performance evaluation processes.
• Develop update and maintain Quality and Technical Agreements with current GxP guidelines.
• Maintain and update internal audit program.
• Plan audit schedules and facilitate process for audit findings to be resolves and all change implementations to be fulfilled with defined targeted datelines in compliance to GMP and company SOPs.
• Proper records and documentation in accordance with regulatory guidelines such as GMP document, site master files, quality manual and agreements.
• Establish and maintain QMS to ensure content compliance to all regulations and company practises, overseeing Validation QA.
• Provide training and guidance to quality staff on quality documentation, including system – Veeva (QMS), compliance training system etc.
• Collaborate with quality team and carry out assigned quality audit activities for continuous improvement throughout the organization.

Requirements:

• Bachelor's degree in a Chemistry, Pharmacy, or a related discipline; preferred Science or Engineering.
• Minimum of 5 years of experience in pharmaceutical or medical device industry, including 3 years in relevant quality compliance and audit roles.
• Experienced in auditing, especially with experience managing overseas EMO/CMO/third party manufacturing experience is highly preferred.
• Strong GMP, Computer system validation, deviation management, CAPA, change control and documentation management in pharmaceutical / medical device MNC environment.
• Demonstrate pro-activeness to drive results even amidst crises and ambiguity, thriving in fast-paced and dynamic environments.
• Successful proven track records of implementing continuous improvement projects with regional teams to enhance overall business operations.
• Possess strong cross-functional collaboration skills and adept stakeholder management capabilities. Skilled in building and maintaining relationships at all levels, both internally and externally.

NOTE: Position title may change based on candidate's experience, qualifications, and company structure at time of offer. This is to ensure alignment with candidate and organizational needs.

The selection process involves careful consideration, and only shortlisted candidates will be contacted. We extend our gratitude to all applicants for their interest and effort in applying.

Principal Consultant: Amber Chen | Registration Number: R22108633 | EA License Number: R1110404

Responsibilities

• Establish, maintain, and continuously improve the Quality Management System (QMS), approvals, and regulatory compliance requirements.
• Plan, organize, and lead quality initiatives to promote a culture of quality within the organization.
• Maintain and enhance quality performance across all divisions.
• Conduct essential audits and inspections internally or via third parties or clients as required.
• Establish, implement, and coordinate the audit and approval program, report audit outcomes, and ensure corrective actions are followed up.
• Support teams in root cause analysis, develop action plans to prevent issue recurrence, and provide training and guidance as needed.
• Investigate incidents and prepare detailed reports in line with regulatory requirements.
• Train and develop employees on QMS processes, quality principles, tools, and techniques.
• Manage licensing applications and renewals for sites, products, and services.
• Allocate budgets and control costs for QMS projects, resource management, training, audits, certifications, and professional subscriptions.
• Implement quality procedures aligned with regulations and maintain documentation of approvals, procedures, and accreditations for assigned locations.
• Communicate quality procedures to ensure all regional team members understand their responsibilities in supporting quality assurance.
• Manage operational, technical, health, safety, and environmental audits per the audit schedule.
• Participate in investigations of quality issues, non-conformances, and complaints, ensuring documentation, reporting, and appropriate escalation.
• Monitor and follow up on supplier corrective and preventive actions (CAPA) and improvement initiatives.
• Contribute to statistical analyses to recommend improvements.
• Advise leaders and senior managers on compliance issues or supplier quality improvement needs.
• Perform any additional duties or projects as assigned.

Requirements

• Candidate must have minimum of 5 years working in aerospace MRO or aviation workshop
• Minimum Diploma in Engineering or Quality Assurance or related field.
• Candidate must be certified ISO Lead and Internal Auditor
• Passed the CAAS L11/M10 / L12 exam
• Experience in Part 145 approvals and activities.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

- 3 months contract (will convert to Perm)

- Up to $3200

- Monday to Friday: 8.30am-5.30pm

- Queenstown

Responsibilities:

• Work with process owners to review, update and evaluate the effectiveness of the procedures of the Institute's Quality Management System to ensure compliance to ISO 9001, ERF and EduTrust GD4 requirements.
• Collect and compile validation and verification of data and records.
• Verification check on documents submitted for completeness to qualify agent/vendor qualification and SSG submission.
• Liaise with respective departments for corrective action from students feedback, survey results and comments and verify the effectiveness of the corrective actions.
• Review documents for SSG submission.
• Prepare and conduct Quality training when required.
• Perform general administrative support to the department and other ad-hoc duties/ tasks, or projects assigned by Manager.

Period:

3 months contract (will be converted to perm)

Salary:

• Up to $3200

Working hours:

• Monday to Friday: 8.30am-5.30pm

Location:

• Queenstown

Requirements:

• Minimum a Degree in any disciplines.
• Able to work independently, as well as a team player.
• Proficient in Microsoft Word, Excel and PowerPoint.
• Possess good communication skills - written and verbal.

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Registration No. R2197670)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Human Resource Centre Pte Ltd (EA License Number: 97C4832)

3 Shenton Way, #19-01 Shenton House, Singapore 068805

T: 6337 3183 | F: 6337 0329 | W: www.successhrc.com.sg

Job Responsibilities:

• Document business processes, workflows, and user stories;
• Conduct functional and non-functional testing, including performance, security, integration, and usability testing;
• Develop and maintain test plans, test cases, scenarios, and automated scripts using Tricentis TOSCA;
• Collaborate with stakeholders and contractors to ensure quality standards are met;
• Review and recommend improvements to test processes and methodologies;
• Manage and track testing activities to meet project timelines.

Job Requirements:

• Bachelor’s degree in Computer Science, Engineering, IT, or related fields (preferred);
• Certifications in Software Testing/Quality Assurance (e.g., CSTP, CSQA) are advantageous;
• Minimum 3 years of experience in Quality Assurance/Testing roles;
• Proficiency in automated testing tools (e.g., Tricentis TOSCA) and experience with government services testing;
• Strong analytical, communication, and interpersonal skills.

We regret to inform that only shortlisted candidates will be contacted.

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

Electrical and Control Design Engineer | Up to $5.8k | 5 Days | Woodlands

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $3,200 - $5,800
Location: Woodlands Ave 9

Job Summary:

The Electrical Controls Design Engineer will be responsible for designing, developing, and implementing control systems for various electrical machines. This role requires a strong background in electrical engineering, control systems, and a deep understanding of machine operations. The ideal candidate will be able to work collaboratively with cross-functional teams to ensure the successful delivery of projects.

Key Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Ensure the proper functioning and integration of control components.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Provide technical support and training to manufacturing and maintenance teams.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Maintain detailed documentation throughout the project lifecycle.
• Stay updated with the latest industry trends and technologies to continuously improve control system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• 3+ years of experience in designing and implementing control systems for electrical machines.
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Ability to manage multiple projects and meet deadlines.
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $3,200 - $5,800
Location: Woodlands Ave 9

Job Summary:

The Electrical Controls Design Engineer will be responsible for designing, developing, and implementing control systems for various electrical machines. This role requires a strong background in electrical engineering, control systems, and a deep understanding of machine operations. The ideal candidate will be able to work collaboratively with cross-functional teams to ensure the successful delivery of projects.

Key Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Ensure the proper functioning and integration of control components.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Provide technical support and training to manufacturing and maintenance teams.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Maintain detailed documentation throughout the project lifecycle.
• Stay updated with the latest industry trends and technologies to continuously improve control system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• 3+ years of experience in designing and implementing control systems for electrical machines.
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Ability to manage multiple projects and meet deadlines.
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Job Description

You will be responsible for the successful installation and commissioning of the Control systems and UPS system design and built for the Water Reclamation plant based in Singapore. You will ensure that the work are completed as per contract specifications and in line with the relevant quality and safety guidelines. Working in Customer’s Site in Tuas, and reporting to the Project Manager / Integration Manager.

Responsibilities

• Taking the lead in coordinating with our appointed Contractor in ensuring that the necessary documentation; Project Schedule, Method Statement, Risk Assessment, Safe Work Procedure, tooling list, inspection checklist, or any other documentation as required for the project, are prepared and submission on time. They will need to be approved before commencement of work.
• Ensure that all design documentation is complete and provided to the contractor, prior to the start of the work to ensure a smooth installation and commissioning activities.
• To conduct pre-installation workshop with Client, facility owner and contractor to ensure clarity of work scope and resolve any conflicts identified.
• To conduct the Room “Hand over Take Over” procedure from the respective facility owner, prior to the start of work.
• Ensure compliance to the Project and Health and Safety requirements for all personnel working in this project, including employees and sub-contractors.
• Ensure all necessary Permit to Work are taken and approved prior to start of work
• Coordination with Client and Facility owners to ensure timely start of work and to resolve any site installation issues that may occur during the site work.
• Supervise and direct the contractors to ensure that all work are done as per design and in a safe manner.
• Proactively monitor and Control of the project installation and commissioning work as per plan and highlight any issues in advance and to lead in resolving them
• On-time submission of daily report, report of any issue identified during the site work and driving for a resolution plan, and any other reports/update as required by the PM / Integration Manager.
• Supporting of commissioning activities as required
• Ensure drawing markup to reflect as per actual installation vs design
• Ensure site installation and commissioning team adhere to project and safety requirements

Requirements

• Diploma/Bachelor degree in Engineering or similar field.
• Excellent written and verbal skill in English
• At least 5 years’ experience in site installation and Commissioning work, involving in Control Systems and Electrical System at a construction site
• Working in Confined Space certification, Work at Height certification and all Singapore Regulatory certification for working in construction site preferred
• Ability to recognize and proactively respond to dynamic site situation and liaise with the necessary parties to resolve.
• Ability to relate with different groups of people at various levels of the organization
• Pragmatic approach to scope of work and work environment
• Familiar with the local regulatory and project requirement for construction work in Singapore
• Strong commitment to safe work practices and dedication to following all relevant workplace safety guidelines.
• A collaborative approach to working, demonstrating strong communication and leadership skills.

Site office Location: TWRP C5A Site @ Tuas Nexus Drive

Transport : Pick-up point & Drop off at Tuas Crescent MRT station

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Well Established Company
• Basic $4000 - $5200 + Variable Bonus + Allowances
• Excellent Welfare and Benefits + Career progression
• Working location: West / Northeast (Both location available)
• Working hours: 8:30am – 5:30pm (Mon – Fri)
• DCS | PLC | SCADA | Harmonas Programming
• Training Provided

Job Responsibilities:

• Plan, design, and configure control systems for a variety of applications, ensuring seamless integration with Building Automation Systems (BAS), Distributed Control Systems (DCS), SCADA, and Programmable Logic Controllers (PLC)
• Create detailed control schematics and field termination drawings, ensuring accurate design documentation for system installation
• Set up and configure system databases, prepare control descriptions for Testing and Commissioning (T&C), ensuring all configurations are optimized for performance.
• Lead Factory Acceptance Testing to verify system functionality, compliance with project requirements, and quality standards.
• Provide hands-on support during installation, commissioning, and start-up phases. Troubleshoot, repair, and calibrate systems on-site to ensure optimal performance.
• Conduct in-depth troubleshooting and fault diagnosis across systems such as DCS, PLC, BAS, and SCADA to resolve issues and maintain smooth operation.
• Perform system testing, calibration, and fine-tuning to ensure systems operate at peak performance and meet specified requirements.
• Work closely with project managers, designers, and engineers to ensure projects are executed smoothly and on time. Communicate technical requirements and solutions effectively to clients and stakeholders.

Qualifications & Experience:

• Bachelor’s Degree in Electrical Engineering, Control Systems, Automation, or a related field.
• Proven experience in system configuration, design, and commissioning of DCS, PLC, BAS, and SCADA systems.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $4000 - $4500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• Maintain updated and accurate documents and records on ISO 9001, 14001 and 13485 system (includes Quality Manual, Procedures, Work Instructions, Forms, etc.) to ensure system compliance and ready for Management Review
• Plan and conduct internal and external audits to ensure readiness of all sections for third party certification body, management review and customer audits
• Coordinate with internal stakeholders to participate in customer or supplier audits for compliance
• Generate and review quality reports on suppliers’ performance and work with suppliers to address non-conforming materials, and drive for continuous improvement
• Issue and follow up on Supplier Corrective Action Request (SCAR) to suppliers, monitor and review SCAR effectiveness for timely closure
• Maintain and conduct regular review of calibration and preventive maintenance for equipment
• Responsible for quality issues arising from production and customer feedback, and collaborate with the production team to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation
• Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements
• Perform any other duties, as assigned

Job Requirements:

• Minimum Diploma or Degree in Precision Engineering, Quality Management or Mechanical Engineering with 2 years of working experience in quality engineering or manufacturing

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• The Senior Supplier Quality Specialist will reports to the Supplier Quality Supervisor will be responsible to support the development and maintenance of Supplier Quality Management business processes to comply with all applicable regulatory requirements and Quality Policies and Procedures.
• You will ensure oversight on the site’s supplier quality and material release processes are executed in accordance to Quality Policies and Procedures

Major Responsibilities:

• Provide Leadership for the Supplier Quality team as a senior specialist in the absence of the manager and Supervisor
• Ensure compliance with applicable policies, processes and procedures, contributing to the execution of strategies and oversight of Supplier Quality programs
• Execute and provide oversight on procedures to ensure that incoming materials including raw materials and commodities received at our Company to meet approved company policies and processes.
• Manage investigations arising from materials nonconformity with cross functional team.
• Serves as the primary contact to review and follow up on Supplier Qualification documentation (e.g. Approved Supplier Lists, Quality Questionnaires, customer complaints, Supplier packages etc.) and activities (e.g. supplier audits, supplier review, supplier change notification etc.)
• Prepare, maintain and facilitate review of the GMP documentations (Quality Technical Agreement and Internal Quality Technical Agreement)
• Coordinate site supplier quality issues (such as deviations), audit assessments and subsequent follow-up actions.
• Support global supplier quality team initiatives or other site improvement projects. Perform review/audit of Incoming material inspection package which includes receiving, sampling and testing compliance. Completion of Incoming Raw Material checks and release and the administration of Quality Logs, e.g. QA Hold.Review / Approve material master data set up for new material introduction.

Requirements

• Min Diploma / Degree in any science / engineering courses
• Min 2 years of Supplier quality exp from Pharma industry

$4K to $5K

office hours

Pharma MNC

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

Job Description

• Industry/ Organization Type: General Cleaning Services
• Position Title: Pest Control Technician
• Working Location: Islandwide
• Working Hours: Monday to Friday (9 am-6 pm), Saturday (9 am-1 pm)
• Salary Package: Basic $2,000 - $2,800 + Bonus + Allowance
• Duration: Permanent

Key Responsibilities

• Conduct inspections and identify infestation sources.
• Implement targeted treatment plans using safe and eco-friendly methods.
• Educate clients on pest prevention and maintenance strategies.
• Maintain accurate records of service visits and recommendations.
• Ensure compliance with safety regulations and company standards.

APPLY NOW!!!

• Ability to work independently and in a team
• Able to commit 5.5 days a week
• Must have a valid NEA Vector Control License
• Must have a valid Class 3 Driving License

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69357 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Quality Assurance / Quality Specialist / Quality Engineer

Company Overview

Location: Kranji (near MRT with a 5-minute shuttle bus)

Number of Openings: 9
Duration: 6-month
Salary: up to 8K

Job Responsibilities:

1. Documentation and Quality Oversight:Revise, review, and approve SOPs, MBR/EBR, and QO documents.
   Provide quality guidance and support to the manufacturing team, addressing quality queries and issues.
   
2. GMP and Compliance:Conduct quality oversight activities, including GEMBA and GMP walks.
   Adhere to and enforce cGMP and regulatory requirements, especially for FDA and EU compliance.
   
3. Qualification/Validation Support:Perform IQ/OQ tasks and assist in validation activities including Data Integrity, Analytical Instrument Qualification, Analytical and Microbiology Method Validation, and Critical Reagent Qualification.
   Review and approve related protocols, reports, and ensure alignment with regulatory requirements.
   
4. Project Involvement and Collaboration:Act as the Quality Representative in cross-functional projects.
   Provide validation expertise and maintain Master Validation Plans.
   Collaborate on multi-site initiatives to harmonize Quality Systems across plants.
   
5. Documentation Integrity and Inspection Readiness:Ensure documents are clear, compliant, and defendable during audits.
   Support multisite initiatives to align validation activities across locations.
   
6. Other Responsibilities:Build and maintain partnerships with internal departments.
   Adhere to EHS requirements and Shire’s Code of Conduct.
   

How to Apply: Send your resume to Jocelyn Chan at [email protected] or contact via Telegram @jocelynchan.

Jocelyn Chan | Consultant | Recruit Express Pte Ltd (Healthcare & Lifescience) Company EA Licence Number: 99C4599 Personnel EA License: R1331820

20 years of quality service treatment. Well-trained professional management and a family-oriented workplace culture is one of the hallmarks of a successful company. Come and join us!

Job Description

• Service Oriented, Responsible, Team Player
• To ensure prompt and timely pest control servicing at client's premises
• Responsible with good working etiquette
• To provide good quality service to customers
• To carry out pest control inspections and treatments at customer premises and conduct treatments accordingly
• Allowances, Incentives & Overtimes benefits
• Trainings sponsored to develop individual growth
• Opportunity Career Development

Job Requirements

• With driving license preferably
• Minimum of 02 years experience in same field
• Completed at least GCE O'Level or equivalent

Call in to arrange for walk-in interview: 6891 3133

Email resume to: [email protected]

• MNC Company
• Basic $2500 - $3200 + Allowance + AWS + VB + Excellent Benefits
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8.30am to 5.15pm
• Jurong Island. Company Transport provided
• Training provided for those without/lesser experience

Job Responsibilities:

• To perform routine analysis of polymer testing & wet chemistry analysis
• To ensure that tests assigned are performed in a timely manner in accordance with validated test protocols and procedures
• To perform instruments’ calibrations, maintenance, and troubleshooting
• To perform housekeeping and maintain the cleanliness in the laboratory
• To perform inventory check & improvement idea in the lab
• To assist superiors with non – routine study samples and any other tasks assigned

Requirements:

• Diploma in Chemical Process Technology / Chemical Engineering
• Willing to work overtime when required

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Basic salary $2300 - $2800 + OT + AWS + Variable Bonus

• Working location at Ang Mo Kio

• Working hour: Monday – Friday 8:30am – 5:30pm

• Excellent Welfare & Benefits

• Well Established Company

Job Scope

• Ensure orders are accurate and ready for fulfilment by verifying order details and availability of stock.
• Pick items from inventory according to order requirements, ensuring accuracy and quality.
• Pack products securely to minimize damage during shipping, adhering to company packaging standards.
• Monitor stock levels to ensure items are available for order fulfilment.
• Process returned items in accordance with company return policies.
• Communicate with the customer service team to resolve order-related issues such as delays, product damages, or order discrepancies.
• Maintain up-to-date records in the order management and inventory systems.
• Adhere to all safety protocols while handling products and packaging.
• Work closely with other departments to streamline operations and enhance customer experience.

Requirement

• GCE O Level & above
• 0 – 2 years related experience in warehousing / logistics field

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Basic salary $2300 - $2600 + OT + AWS + Variable Bonus

• Working location at Jurong East

• Working hour: Monday – Friday 8:30am – 5:30pm

• Excellent Welfare & Benefits

• Well Established Company

Job Scope

• Ensure orders are accurate and ready for fulfilment by verifying order details and availability of stock.
• Pick items from inventory according to order requirements, ensuring accuracy and quality.
• Pack products securely to minimize damage during shipping, adhering to company packaging standards.
• Monitor stock levels to ensure items are available for order fulfilment.
• Process returned items in accordance with company return policies.
• Communicate with the customer service team to resolve order-related issues such as delays, product damages, or order discrepancies.
• Maintain up-to-date records in the order management and inventory systems.
• Adhere to all safety protocols while handling products and packaging.
• Work closely with other departments to streamline operations and enhance customer experience.

Requirement

• GCE O Level & above
• 0 – 2 years related experience in warehousing / logistics field

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client is a leading logistics company. They are looking for a Senior Quality Executive to assist their Quality team for the next phrase of their business. They are located at West of Singapore– easily accessible. The Senior Quality Executive is responsible for:

Duties

• Establish, update, and uphold the Quality and Environmental Management System (QEMS) in alignment with ISO 9001:2015, collaborating with stakeholders to create and revise relevant procedures.
• Track quality trends and performance metrics, ensuring continuous improvement within the organization.
• Manage internal and external ISO 9001:2015 certification processes, audits, and compliance to meet all required standards and objectives.
• Communicate quality assurance strategies and processes across the organization through quality programs, training, and awareness initiatives.
• Lead monthly quality review meetings, generate performance reports, and conduct site inspections to ensure compliance with quality standards.
• Participate in customer audits, lead investigations into quality issues, manage supplier onboarding, and address improvement areas based on non-conformities.

Requirements

• Min Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• Min 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We foster an inclusive culture and are looking for diverse, talented people to join Alcon.

As an Quality Engineer you are tasked to ensuring the design transfer and manufacturing operation activities of medical devices produced meet the requirements of Alcon standards, 21 CFR Part 820, Part 11, ISO 13485, the Medical Device Regulation (MDR) and other applicable regulations and standards at Tuas.

In this role, a typical day will include:

• Provide operational support for product release to ensure it meets all quality and regulatory requirements when necessary
• Review and approve validation protocols and reports; ensure compliance with established procedures andsound validation methodology.
• Provide e-compliance oversight to site CSV activities.
• Provide quality oversight to activities related to calibration, preventive maintenance, spare part assessment and associated deviations.
• Support internal and external audits and is responsible for audit finding closure, as required. Work with cross-functional teams to resolve operational quality issues
• Trend, analyze and monitor key performance indicators, suggest improvements and escalate to supervisor/management as necessary Identify improvement opportunities and lead/support the implementation activities to improve performance and efficiency.
• Meet quality objectives set by management & comply to Alcon, QMS and Safety requirements.
• Performs any other duties as assigned by Supervisor according to business needs.

What You'll Bring to Alcon

• Bachelor/ Degree in Science, Life Science, Engineering or other appropriate education and
• experience in pharmaceutical and medical device industry
• 1-3 years of experience in Quality Assurance or Quality Control in a Pharmaceutical and
• Medical Device
• Have experience in validation activities.

Why Join Us:

• Opportunity to work with a leading global medical device company.
• Collaborate with a diverse and talented team in a supportive work environment.
• Competitive compensation package and comprehensive benefits.
• Continuous learning and development opportunities.

• Well Established Company
• Basic $5000 - $6500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm
• QMS | ISO 13485 | Medical Devices

Job Responsibilities:

• Conduct assessment and review on supplier qualification, performance and process capability
• Ensure supplier quality issues are deal with, analysed, improved and follow through
• Collect, handle and follow-up on customer feedback/complaints
• Support internal, external and customer audits
• Evaluation, verification and validation of new parts/samples
• Establish and maintain inspection criteria for incoming, in-process and final products
• Identify quality issues, NCR, CAPA handling and drive continuous improvement
• Authorize the release (COC) of products, COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in relevant subject area with 2 years’ experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous
• Familiar with quality control tools

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492