Salary: up to $6000

Working Days & Hours: Mon-Fri Office Hours

Location: Changi (pickup at tanah merah)

Job Description:

• Perform the role of Lead Investigator into incidents to which you have been assigned. In doing so, it is necessary to immediately:
  • Visit the area where the incident has been detected (if applicable, e.g. if detected internally in an operational setting)
  • Discuss with all involved in the incident to gain a full understanding of the process and incident per GQA.003
  • Gather background information (or coordinate accordingly) regarding the reported incident
• Perform an initial impact assessment in a timely manner. Identify immediate action to be taken in order to ‘ring-fence’ the problem and ensure it is not further exacerbated whilst the investigation is ongoing.
• Liaise with personnel within various departments / sites and encourage individuals to be forthcoming with pertinent information to facilitate the investigation. This may involve Lead Investigators in other areas or at other sites.
• Host internal meetings (locally or globally, as applicable) and co-ordinate brain-storming sessions to advance the investigation.
• Use appropriate Root Cause Analysis tools (as applicable) to establish causes and any contributory factors.
• Determine the communication strategy and effectively liaise with the PL /PM (as applicable) and all other relevant parties to appraise them of the investigation as it progresses (where applicable). This may extend to include notification of customers, VPs, Key Account sponsors, BD, Commercial Contracts, Quality Management and the QPs (as applicable).
• Escalate to department manager and Quality management any critical issues that become apparent during the course of the investigation that may not have been immediately obvious.
• Determine appropriate and meaningful CAPA to prevent recurrence. Gain agreement of such with department managers (locally or globally, as applicable).
• Document the investigation in the appropriate template. Ensure the report is written to a high standard and that every effort is made to ensure it is Right First Time and acceptable to the customer and the regulators.
• Proactively monitor the progress of all investigations assigned to you and prioritise accordingly. Take responsibility and ownership for such endeavoring to ensure close out in a timely manner. Escalate any that are overdue.
• Perform CAPA effectiveness checks as required in a timely manner and provide the necessary evidence of such to Quality.
• Host or participate (as applicable) in external teleconferences / meetings / regulatory inspections to discuss particular incidents, should additional explanation or assurance be needed. Ensure all such contact, oral and written, is carried out professionally in order to develop and maintain good relationships.
• Promote good inter-departmental and global relationships. Work within and across functions and sites as necessary to assure global consideration of investigations and the CAPA arising from such.
• Endeavor to approach problems with a positive attitude and as an opportunity for Almac to continuously improve.
• Attend all necessary training and retain a thorough knowledge of processes / procedures pertinent to the area you represent.
• Update KPIs and capture trending information at a department level, ensuring there is good visibility of this data globally. Remain observant of recurring issues, taking such into consideration at the point of an investigation and escalate to management as applicable.
• Meet regularly with management to discuss KPI and trending data. Present ideas / suggestions for consideration into further process improvements.
• Attend periodic meetings with other Lead Investigators locally and globally. Be forthcoming with ideas / experiences to ensure shared learning and continuous improvement.
• Ensure documentation is generated and completed in accordance with the principles of GMP and internal SOPs.
• Fulfil any necessary duties associated with the role, as and when required.

Job Requirements: Min Degree in Life Sciences or similar w min 4 yrs of relevant experience in Pharma

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Responsibilities:

• Take the lead and participate in the development and maintenance of software for equipments.
• Lead and particiapate in the coding, testing, and debugging phases of the developed software.
• Lead a team in the maintenance, review, and improvement
• Assist in defining the architecture of new designs and produce technical documents
• Engage with customers to understand requirements and create specifications.

Requirements:

• Min Diploma in Electrical/Electronic Engineering, Computer Science,or it's equivalent
• At least one year related working experience
• Demonstrate proficiency in Visual C# programming with WinForm applications
• Display familiarity with Modbus, EtherCAT fieldbus protocols, Winsock, and serial communications
• Exhibit familiarity with PLC programming (e.g., Omron) and various motion systems (e.g., IAI, ADLink).

Interested candidates who wish to apply for the advertised position, please click 'APPLY' to send in your resume.

EA License No: 13C6305

Reg. No.: R1874608

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Mandatory:

- TOSCA Not Mandatory, but will get chance to learn

- General Ledger Experience Required

- Data Analaysis Prefrred

Responsibilities
· Understand Business Requirements and Functional Specs documents
· Learn and master TOSCA tool which is a software testing tool used to design test cases and automate end to end testing
· Understand Test Case Design developed in TOSCA for the technology change
· Drive testing delivery as per the test strategy and test plan
· Create instances in TOSCA for multiple test data combinations
· Perform Exploratory Test Case execution
· Perform Test Case automation in TOSCA for identified modules
· Report defects in tracking system and follow-through on defect resolution
· Conduct training to impacted operations and/ or business users
· Provide post-implementation support to operations users
Requirements
· Bachelor’s degree/ Diploma holder
· Operations experience is advantageous (Trade Finance)
· Proficient computer skills
· Strong analytical skills
· Good communication and interpersonal skills
· Able to work independently and in a team

Our Client is a leader in the Energy MNC in Singapore. Due to their current expansion plan, they are looking for a Control & Instrumentation Technician to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities

• Responsible for equipment repairs and address malfunctions, followed by system testing and recommissioning.
• Responsible for calibrations, overhauls, inspections and servicing during plant scheduled outages.
• Execute modifications, upgrades, and installations to enhance plant systems and equipment, improving availability and reliability.
• Maintain comprehensive work records and data using software such as Maximo, MS Word, and MS Excel.
• Support engineers and technical officers in maintenance tasks and oversee assigned contractors.
• Any ad-hoc duty as assigned.

Requirements

• Min ITE or Diploma in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Min 1 years in oil & gas or manufacturing industry

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Our client is a global MNC, one of the most established pioneers in the Chemical industry. Due to business needs, they are now recruiting a Quality Assurance Engineer to be part of their QA/QC Team for ongoing transformation projects. They are located in the West - easily accessible.

Duties of Quality Assurance Engineer:

• Assisting in the research and development of Cement-based mortar formulations, including assessing alternative raw materials.
• Conducting tests on raw materials and finished products to ensure quality compliance.
• Validating product performance against industry standards and internal evaluation criteria.
• Ensuring products meet local regulatory standards.
• Providing manufacturing support, troubleshooting, and process improvement.
• Offering technical service, product trials, and training.
• Maintaining lab safety standards and workplace security.
• Any other adhoc duties as assigned

Requirements:

• Entry level are welcome to apply. Training provided.
• Experience with Dry Mixes is an added advantage

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Mandatory:

- at least 3 years experience

- Set Up of Manual Guide (Guide for production users to use the guide for testing in production environment)

- SOP (working with busniess users to draft out a deck for end users of a step by step instructions for new fucntions)

Responsibilities
· Perform User Acceptance Testing (UAT), writing test cases, reporting defects and updating results.
· Able to understand business requirements/functional requirements and translate them into test cases.
· Able to execute test scripts, raise defects in tracking system (e.g. Jira) and follow through on defect resolution.
· Able to collaborate with business and technology team to ensure effective end to end testing.
· Experience in performing UAT testing or Business Analyst is preferred.
· Strong communication skills both written and verbal.
· Strong analytical skills.
· Attention to details.
· Knowledge in at least on one of the following would be advantageous:
- Electronic Banking (e.g. internet banking)
- Channels Banking (e.g. File transfer service, SWIFTnet)
- Payments (e.g. Domestic Wire, Cross Border Wire, G3 Bulk Payment, G3 FAST)
- Liquidity (e.g. Sweeping and Pooling)
- Statements (e.g. MT940, Camt)
- APIs
· Knowledge or have experience on Test Cases Automation will be an added advantage
· Certified Tosca Test Design Specialist or Automation Specialist will be an added advantage
· Experience in writing testing SOP or setup/manual guide.
· Experience in System Testing

• Ascertain whether the GFCS department has followed Key Risk and Control Self-Assessment (KRCSA) methodology in their control testing
• Perform independent testing to assess if controls are operating as intended.
• Document samples, test steps, results and findings
• Follow up with the department to put up action plan(s) for ineffective controls to ensure that prompt action is taken to prevent or minimize the potential occurrence of risk incidents
• Monitor the progress of action plans and report to BRCM
• Work closely with Country BRCM to roll out independent assurance review, incident escalation reporting, and OR programmes to ensure compliance with the related Group policies.

• Independent Control Testing

- Audit Experience Preferred

Our client is from Oil and Gas industry. They are looking for a C & I Engineer to assist their team for the next phase of their business. They are located in West.

Duties:

• Responsible for Yokogawa DCIS, SIS, and FGS support to ensure safe operations.
• Installation, troubleshooting, and maintenance of automation systems.
• Manage vendor contracts and provide technical training.
• Develop and maintain maintenance procedures and documentation.
• Execute projects related to automation and plan for system lifecycle.
• Lead Cyber Security compliance and conduct risk assessments.
• Offer expertise in OT cyber-security projects.

Requirements:

• Min Degree in Computer, Electrical Engineering or any relevant field.
• Min 4 years of working experience in Oil and Gas and utilities or any relevant industry.
• Experience in ISO27001 and IEC61508 will be anadvantange.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115873 (New Jirn Tone)

Our client is from Oil and Gas industry. They are looking for a C & I Engineer to assist their team for the next phase of their business. They are located in West.

Duties:

• Responsible for Yokogawa DCIS, SIS, and FGS support to ensure safe operations.
• Installation, troubleshooting, and maintenance of automation systems.
• Manage vendor contracts and provide technical training.
• Develop and maintain maintenance procedures and documentation.
• Execute projects related to automation and plan for system lifecycle.
• Lead Cyber Security compliance and conduct risk assessments.
• Offer expertise in OT cyber-security projects.

Requirements:

• Min Degree in Computer, Electrical Engineering or any relevant field.
• Min 4 years of working experience in Oil and Gas and utilities or any relevant industry.
• Experience in ISO27001 and IEC61508 will be anadvantange.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115873 (New Jirn Tone)

Responsibilities:

• Develop new clients and maintain strong relationship with existing clients
• Analysing and exploring new industries
• Work closely with vendors for project sales
• Perform products demostration and training to clients

Requirements:

• Min diploma in Mechanical Engineering or it's equivalent
• At least 1 years related working experience
• Experience in fluid control related industrial products is an added advatage
• Good interpersonal skills

Interested candidates who wish to apply for the advertised position, please click 'APPLY' to send in your resume.

EA License No: 13C6305

Reg. No.: R1874608

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

• Take the lead and participate in the development and maintenance of software for equipments.
• Lead and particiapate in the coding, testing, and debugging phases of the developed software.
• Lead a team in the maintenance, review, and improvement
• Assist in defining the architecture of new designs and produce technical documents
• Engage with customers to understand requirements and create specifications.

Requirements:

• Min Diploma in Electrical/Electronic Engineering, Computer Science,or it's equivalent
• At least one year related working experience
• Demonstrate proficiency in Visual C# programming with WinForm applications
• Display familiarity with Modbus, EtherCAT fieldbus protocols, Winsock, and serial communications
• Exhibit familiarity with PLC programming (e.g., Omron) and various motion systems (e.g., IAI, ADLink).

Interested candidates who wish to apply for the advertised position, please click 'APPLY' to send in your resume.

EA License No: 13C6305

Reg. No.: R1874608

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

As a Software Quality Engineer, you need to:

• Design and implement comprehensive test plans, test cases, test data and test scripts to ensure the quality of software products. • Collaborate with Product Owners and stakeholders to define test objectives, scope and entry/exit criteria for testing phases. • Perform system testing (e.g., functional and performance testing). • Develop and maintain automated test scripts and tools. • Review and analyse test results, identify defects and anomalies and work closely with the stakeholders to resolve issues. • Continuously improve the software testing process by identifying areas for improvement in testing practices and tools. EXPERIENCE AND SKILLS NEEDED As a Software Quality Engineer, you need: • Strong background in Computer Science, Computer Engineering, Information Systems Management, Information Technology or related disciplines. • At least 5 years of experience in software quality assurance testing. • Strong knowledge of software testing methodologies, tools and processes. • Experience with test automation tools such as Selenium or similar. • Experience in performance testing tools such as JMeter or similar. • Experience with programming languages such as Java, Phyton, or similar. • Experience in issue management and continuous integration tools such as Jenkins, JIRA, or similar. • Familiarity with Agile development methodologies and experience working in Agile teams. • Familiarity with cloud-based testing tools. • Knowledge of security testing methodologies. • Strong analytical and problem-solving skills. • Excellent written and verbal communication skills and strong collaboration skills. • Ability to work independently and as part of a multi-disciplinary team.

Job Responsibilities:

· Coordinate and implement all Environmental Control Programs.

· Ensure compliance of operations with NEA and EHS regulations.

· Produce Site Environmental Control Report in regular basis.

· Conduct environmental control audit and investigations.

· Perform the statutory roles of Registered ECO and maintain good environmental health standards.

· Maintain mandatory records and other documentation as may be required by the regulatory authorities.

· Advise the site staff on all matters related to environmental issues.

Job Requirements:

· Minimum 3 years of relevant experience in local ECO position.

· Possessed NEA Registered ECO

· Familiar with OSH/ISO documentation.

· Good verbal and written English language.

· Able to start work immediately or within short notice.

· Earth Control Measures Officer (ECMO) qualified.

• Inspect incoming and outgoing products
• Expedite fabrication job for sales orders.
• Update the quality control metrics and monthly job statistic
• Conduct materials verification and document for fabrication job
• Inspection and issuing of equipment service report for equipment servicing job
• Issue non-conformance report
• Documents compilation of manufacturing date record (MDR)
• Assist Sales Department in submitting fabrication quotation
• Assist to prepare fabrication drawing
• Liaise with third party

Job Requirements

• GCE O Level & above
• Minimum 3 years of relevant experience in Marine, Shipping or related industry
• Good communication skills
• Good in handling measuring instruments e.g. Vernier caliper, micrometer etc.
• Able to use autocad to read and interpret technical drawing
• Able to write technical report and inspection report
• 5 days work (8.30am to 6pm) at Pandan Road (Company transport provided near Clementi MRT station)
• Salary $3000 - $3500

Interested applicants please send in your MS Word resume. Shortlisted candidates will be contacted very soon. Thank you.

Working Days: 6 days

Working hours: 5:30am - 1:30pm, 1pm - 9pm (rotating shift)

Location: Little India

Job Summary:

Assist the Supervisor to ensure that proper and efficient management of the control room in the day to day Operations on the assigned unit and oversees new implementations.

Key Responsibilities:

· Ensure that the day-to-day operations for the control room is managed well

· Follow the procedures related to control room

· Attend to trainings in relations to the job and train new joiners in whichever

· area that has been identified

· Provide excellent customer service to the patients in the wards

· Carry out wards walk-about to ensure a good relationship with the patients as well as their concerns are taken care of

· Attend to all patients complain and feedbacks within a short period of time

· Highlight to Supervisor if there is any issue that cannot resolve within own means

· To maintain proper filing and submit the necessary report to the Management at the frequency mentioned

· Have a positive working attitude with colleagues and Supervisor

· Achieve a standard set in the KPI for his/her department

· Involve in continuing professional development to maintain professional standards

· Liaise with the patients in getting the related matter solved in a smother manner

· Carry out Orientation training for new staff in customer service as well as the EMOS system

· Carry out all other administrative and Operational related duties assignment that assigned by your Supervisor and the Management

Key Requirements:

· Minimum Secondary education

· Good communication and interpersonal skills

· Pleasant disposition and neat appearance

· Experience is not required as training will be provided

· Able to work shift and perform overtime duties when required

Salary: $4000 - $4500 + OT
Working Hours: 9am-6pm
Working Days: 5 Days [Monday - Friday]
Working Location: Bukit Batok

Responsibilities

• To Program KNX ETS program for upcoming projects
• To be able to handle electrical wiring and troubleshoot.
• To be able to handle project management on site.
• Able to coordinate with other sub-contractor on site for both lighting and lighting control system.
• To be able to operate 24/7 in the event of a maintenance contract project.

Requirements

• Higher Nitec in Electrical Engineering related field from a certified college.
• Certification in Electrical Technician field from an accredited institution
• Prefer 1 to 2 years’ experience in Building Automations
• Able to Identify and troubleshoot various electrical issues.
• Knowledgeable in lighting control systems
• Preferred Certificate of KNX Installer

https://wa.me/6596420989

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

As a Software Quality Engineer, you need to:

• Design and implement comprehensive test plans, test cases, test data and test scripts to ensure the quality of software products. • Collaborate with Product Owners and stakeholders to define test objectives, scope and entry/exit criteria for testing phases. • Perform system testing (e.g., functional and performance testing). • Develop and maintain automated test scripts and tools. • Review and analyse test results, identify defects and anomalies and work closely with the stakeholders to resolve issues. • Continuously improve the software testing process by identifying areas for improvement in testing practices and tools. EXPERIENCE AND SKILLS NEEDED As a Software Quality Engineer, you need: • Strong background in Computer Science, Computer Engineering, Information Systems Management, Information Technology or related disciplines. • At least 5 years of experience in software quality assurance testing. • Strong knowledge of software testing methodologies, tools and processes. • Experience with test automation tools such as Selenium or similar. • Experience in performance testing tools such as JMeter or similar. • Experience with programming languages such as Java, Phyton, or similar. • Experience in issue management and continuous integration tools such as Jenkins, JIRA, or similar. • Familiarity with Agile development methodologies and experience working in Agile teams. • Familiarity with cloud-based testing tools. • Knowledge of security testing methodologies. • Strong analytical and problem-solving skills. • Excellent written and verbal communication skills and strong collaboration skills. • Ability to work independently and as part of a multi-disciplinary team.

- 1-year renewable contract

- Mon – Fri; 9am – 6.30pm

- United Square

- $2200 + PB

Job Responsibilities:

• Handle all Service Quality email enquiries / complaints for ASD
• Handle compilation of ASD’s DNC request for processing
• Handles Mystery Shopping checks for Loans Specialist team
• To conduct call checks on sales teams
• In charge of all administrative duties for the team – filing/ordering of water/stationary/mailbox etc
• Assist with archiving needs for the team
• Assist with various monthly reports and decks
• Assist with invoice processing
• Conduct PC sweep / clean desk sweep / surprise drawer checks
• Other duties when required

Salary:

• $2200 + PB

Working Hours:

• Mon to Fri: 9am – 6.30pm

Period:

• 1-year renewable contract

Location:

• United Square

Requirements:

• Meticulous and responsible team player
• Proficient in MS Office
• Good listening skill
• Good follow-up skill
• Able to multi-task
• Flexible

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Registration no: R1549023)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Resource Centre Pte Ltd (EA License Number: 04C3201)

3 Shenton Way, #19-01 Shenton House, Singapore 068805

T: 6337 3183 | F: 6337 0329 | W: www.successhrc.com.sg

Role : Process Assurance Analyst

Job Level: Preferably 3 to 5 years of relevant experience (L2)

JOB DESCRIPTION:

Key Skills:

IT Risk Management, Project Management & Business Process Design

Job Objectives

The Team is supporting bank’s Project, Development and Service Delivery teams to ensure process compliance to System Development Methodology (SDM) process.

The team acts as a quality gate for SDM major milestones to ensure entry & exit criteria are met and is responsible to review the quality of the artefacts such as functional & design specification, testing documents and others project deliverables.

The successful candidate will be working with Project and Technical Delivery managers to ensure high quality of deliverables.

Key Responsibilities

• Establish controls and compliance checks on SDM processes

• Design, formulate and enforce governance & compliance process improvement.

• Conduct quality gate review for SDM major milestones (analysis, design, build, test and deployment)

• Perform walkthroughs and interviews with project and application delivery managers to drive process adherence

• Report findings and provide consulting support in ensuring compliances with procedures

• Aside from day-to-day duties, there will be requirements to undertake other responsibilities such as management reporting & other centrally driven project initiatives as needed

Key Requirements

• Degree in computer science/engineering or related disciplines

• At least 3 to 5 years of relevant experience in IT process compliance audit, Project Management and Business Process Design

• Excellent written and verbal communication, interpersonal, organization and analytical skills a MUST

• Strong working experience with MS Office (Word, Excel, PowerPoint), MS Visio, MS Project and SharePoint

• Prior experience in IT risk management and security will be added advantage

Responsibilities:

• Develop and maintain comprehensive test cases and test plans, ensuring their accuracy and relevance.
• Enhance and manage the automated test framework and test environments to optimize efficiency, including tool sizing, configuration, setup, and implementation.
• Execute testing procedures on new features, identifying and documenting defects promptly.
• Conduct various testing types, including exploratory tests, supporting UATs, functional, manual, and performance tests.

Qualifications:

• 5+ years of professional experience in software quality testing, with a strong focus on automation, specifically Selenium.
• Proficiency in Selenium is a primary requirement, including tool sizing, configuration, setup, and implementation.
• Experience in automated testing frameworks such as Junit, HP UFT, and HP QC.
• Knowledge of performance testing tools, including JMeter and HP LoadRunner.
• Demonstrated expertise in working within Agile environments, adapting testing strategies to suit iterative development cycles.

Our client is from Oil and Gas industry. They are looking for a C & I Engineer to assist their team for the next phase of their business. They are located in West.

Duties:

• Responsible for Yokogawa DCIS, SIS, and FGS support to ensure safe operations.
• Installation, troubleshooting, and maintenance of automation systems.
• Manage vendor contracts and provide technical training.
• Develop and maintain maintenance procedures and documentation.
• Execute projects related to automation and plan for system lifecycle.
• Lead Cyber Security compliance and conduct risk assessments.
• Offer expertise in OT cyber-security projects.

Requirements:

• Min Degree in Computer, Electrical Engineering or any relevant field.
• Min 4 years of working experience in Oil and Gas and utilities or any relevant industry.
• Experience in ISO27001 and IEC61508 will be anadvantange.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115873 (New Jirn Tone)

Job Description

Ensure prompt and timely pest management servicing at clients premises.

Providing good quality service to clients.

Carry out pest management inspections and treatments at clients place.

Requirements

Must have Class 3 driving license

Allowances, Incentives, Overtimes, Bonus

Completed GCE 'N' Level or higher OR attained Workplace Literacy & Numeracy (WPLN) Level 5 in Reading, Listening and Numeracy for NEA technician license application

With / Without NEA technician license can apply

Able to converse and write in English

Training will be provided

Courses sponsorship

Job posting for Singaporeans only.

Call / Whatsapp to arrange for interview at 9146 7333

NO EXPERIENCE REQUIRED/ TRAINING WILL BE PROVIDED/ CAN WORK WITH FRIENDS

MUST-HAVE

1. Black Safety Shoes
2. Black Pants (Top wear will be provided)

Job Highlights

• Multiple Locations: North/West/Central/East
• Working Days: Mon to Fri
• Working Hours: 8.30am to 3.30pm/4.30pm (6-hours depolyment)

Job Scope

• Responsible to carry out daily pest control activities according to operational schedule
• Perform comprehensive checks at the assigned location
• Ensure proper measures are adhere
• Collect water samples for investigative needs
• Document and keep records of inspections and treatments

Job Requirements

• Able to commit at least 2-months
• No experience required as training will be provided
• Candidate who possess Driving License will be an added advantage

Attractive opportunity with Local Bank with great working culture

Basic $2,200 + Performance Bonus

Working location: Central

5 days’ work week; Mon - Fri

Working Hours: 9am to 6.30pm

Job Responsibility:

• Handle all Service Quality email enquiries / complaints for Sales Team
• Handle compilation of Sales Team DNC request for processing
• Handles Mystery Shopping checks for Loans Specialist team
• To conduct call checks on sales teams
• In charge of all administrative duties for the team – filing/ordering of water/stationary/mailbox etc
• Assist with archiving needs for the team
• Assist with various monthly reports and decks
• Assist with invoice processing
• Conduct PC sweep / clean desk sweep / surprise drawer checks
• Other duties when required

Job Requirements:

• Min. Higher Nitec Qualification
• Meticulous and responsible team player
• Proficient in MS Office
• Good listening skill – Preferably to understand Chinese for call review
• Good follow-up skill
• Able to multi-task

Interested candidates kindly call/whatsapp/SMS 821210641 or email [email protected] for more information.

June Lee Yue Qing (R1874679)

Just Recruit Singapore Pte Ltd (EA12C6295)

• Remuneration package: Up to SGD$8,000 Basic + Variable Bonus
• Location: Yishun
• 5 Days office hours

Description

• Responsible for spearheading, implementing, and maintaining the Company’s Quality Management System in compliance with:

1. MOH Healthcare Services Act and other regulatory relevant to the company’s services and products
2. accreditation and certification standards: AABB (Association for the Advancement of Blood and Biotherapies), FACT (Foundation for the Accreditation of Cellular Therapy), GDP-MDS SS 620 (Good Distribution Practice for Medical Devices) and other standards when required for the CGL’s services and products

• Ensure requirements for AABB, FACT and MOH license guidelines are implemented and maintained
• Report performance of the quality activities minimally on a quarterly basis and conduct a management review annually.
• Responsible for interfacing with regulators and external quality auditors.
• Monitor and review quality indicators and quality-related reports.
• Provide guidance to departments in the review and refinement of current practices, protocols, processes and risk assessment
• Lead / Facilitate other departments in the root cause analysis of non-conformances to put in place effective corrective actions.
• Facilitate proper process control relevant to services and products that affects safety, identity, purity and potency.
• Initiate process improvement practices and benchmark industry practices across departments to raise standards of operational excellence and service delivery
• Training and distribution of Quality practices within Company and regional teams when required.
• Act as company’s management representative in compliance assessments and coordinate with regulatory or accreditation bodies as and when required.
• Oversee the maintenance of document control centre and system for proper and updated records of quality documents.
• Lead the monitoring of quality objectives and indicators across departments to ensure the quality of products and services is maintained according to SOP and regulatory and accreditation requirements.
• Review processing records and other reports as required by applicable regulatory and/or accreditation standards.
• Drive yearly internal audits for audit readiness and interdepartmental coordination.
• Ensure quality training for new and existing employees is performed and to ensure competencies of the quality department are up-to-date.
• Support supplier/vendor qualifications with participating departments.
• Coordinate and review, on a periodic basis, operational and quality risk assessments, including workplace safety.
• Review, perform and lead gap analysis of new/revised standards published by regulatory and accreditation bodies to ensure departmental SOPs are in compliance
• Setting up of Quality Management Practices and assisting in risk assessment for new services or entities assigned

Requirements

• Degree At least 5 years of working experience in Quality Management, preferably in Healthcare, Bio/Pharma, Health Services, biotechnology/biotherapies related industry, and at least 2 years in a managerial position.
• Led organization in regulatory assessments, accreditation preparation and audits
• Process improvement knowledge and experience
• Ability to handle tight deadlines and irregular situations
• Good change agent has the ability to positively influence others to facilitate a quality and change mindset
• Good communication skills
• Candidates with more experience will be considered for a Senior role

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

EA License Number: 02C4944

Registration Number: R23114519

Posting Personnel: Lin Pei Yu