Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description:

1. Performing F.A inspection and inspection of parts and products with desktop measuring tools / CMM / Smart scope at the incoming / outgoing / in-process gate.
2. To prepare and generate standard inspection report and lead team in performing quality inspection.
3. Monitor on critical customer products, with a corrective and preventive action programs in managing customer complaints / improvement plans.
4. Administer and work on continuous improvement program in achieving good process control.
5. Provide technical guidance to group of inspectors.
6. Manage customer complaints, corrective and preventive action programs.
7. Work closely with customers and inter-department to meet the quality requirements.
8. Experience in calibrating measuring equipments.

Requirements

• Preferred to have NTC / Diploma in related engineering field.
• Required to know-how in using desktop measuring tools, and other equipment such as CMM, Smart Scope, Roundness Tester and Roughness Tester
• Computer competancy.

Job Responsibilities

• Assist in overseeing offshore vendor in functional testing for banking application
• Analyse and review requirements
• Work closely with Business Analysts and Developers on understanding requirements
• Define test coverage and create test cases with test data
• Review test case and test evidence from vendor
• Execute manual test
• Run automation test and update automation test script when required
• Participate in performance test when required
• Ensure defects are logged with proper closure in Defect Management System
• Perform other tasks as and when assigned

Job Requirements

• Bachelor's degree with min. 3 years of testing experience in banking application
• Experience in working with offshore vendor is preferable
• Experience in Automation Test or Performance Test is preferable
• Familiar in JIRA Defect Management System
• Strong analytical skill
• Good communication, interpersonal and presentation skills

Perform third party inspection and assist with inspection coordination

SPECIFIC RESPONSIBILITIES

• Review job file prior to inspection to ensure required work scope is understood.
• Prepare equipment and documentation necessary for the inspection.
• Responsible for following detailed instruction provided.
• Check draft field report and organize report before handing over to Coordinator.
• Generate and issue final reports.
• Update on daily activities including circumstances / problems encountered during inspection
• Maintenance of equipment and other apparatus used.
• Liaise with client on technical issues when necessary.
• Maintain draft report format / template.
• Maintain equipment used.
• Provide guidance to trainee or junior inspectors when on the job.
• Supervise inspection team when required.
• Assist in daily operations & coordination when required
• Any other tasks as assigned by superior.
• Operate and applies judgement to the highest standard of ethics in accordance with SGS standard of ethics and integrity
• Inspection includes fabrication of heavy structures, hull, piping, valves, drilling equipment, machineries, cables, E&I systems etc.
• Inspection location include shipyards, workshops, onshore and offshore installations or any other locations assigned.

REQUIREMENTS:

• Tertiary education in engineering or related field
• Related technical qualification and work experience
• 5-10 years of experience in engineering
• Additional qualifications such as CSWIP 3.1, 3.2 or equivalent Certified Welding Inspector (“CWI”) from American Welding Society (“AWS”), API 510 (Certified Pressure Vessel Inspector), API 570 (Piping Inspector), PCN or ASNT Level II in PT, MT, UT & RI would have an added advantage
• Technical knowledge and experience in related field.
• Able to work independently and to coordinate several activities simultaneously in a fast-paced environment.
• Works well under pressure, challenges status quo.
• Good interpersonal skills and able to interact with all levels of management and clients.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Description:

1. Performing general inspection of parts and products at the Incoming/In-Process/Outgoing gate.
2. Generate Standard QA/QC inspection report.
3. Administrative tasks.
4. Logistics support.

Competence Requirements

• Preferred Secondary, NTC certification holder from related CNC/Fabrication industry.
• Preferably with 2 years of related work experience in manufacturing environment for non-technical trained staff.
• Able to read part drawing, usage of measuring equipment are added advantage.
• Computer competency.

Technical Officer (Maintenance- Instrumentation & Control)

West – Jurong Island, pick-up near Jurong East MRT Station

Responsibilities:

• Carrying out Preventive and Corrective maintenance in accordance with maintenance plans and as work requests raised in the system.
• Maintaining accurate and up-to-date records of all activities performed in the associated systems.
• To perform all jobs in accordance to safe working practices followed in the plant.
• Interact with Operation Staff on maintenance works.
• To assist, supervise contractors assigned for specific works.
• Contributing to the development of asset maintenance plans
• To monitor and take appropriate action to maintain critical spares.
• Assist in liaising with external agencies for all regulatory compliances.
• Responding to emergencies in plant

Requirements:

• Preferably Degree or Diploma in Electrical or Electronics Engineering or equivalent College degree may be waived if equivalent, extensive related experience can be demonstrated.
• Skill sets required – through knowledge on types of process instruments, calibration of instruments/gauges, understanding of control/instrument drawings pneumatic/hydraulic circuits, computers, knowledge in PLC and DCS would be added advantage
• At least 3 to 5 years of relevant experience in a similar capacity, within a Power plant or related Industries.
• Self-motivated independent and has sound analytical and communication skills and is a team worker.
• May be required to work beyond office hours & weekends.

Others:

• Working location: Jurong Island
• 5-day work week
• Company transport provided from Jurong East MRT

Interested applicants, please forward your detailed resume including your last drawn salary, expected salary and date of availability to:

[email protected]

Please indicate the position that you are applying on the subject.

(All applications will be treated in strictest confidence. We regret that only shortlisted candidates will be notified)

By submitting your personal data and/or resume to PacificLight (“us”) or to [email protected], you shall be deemed to have given consent to us collecting, using, and disclosing your personal data for the purpose of assessing your job application. Information collected may also be disclosed to PacificLight Group of Companies (“PacificLight”) which includes PacificLight Power Pte. Ltd and PacificLight Energy Pte. Ltd. for this purpose. Please read our privacy policy here.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

The Quality Assurance (QA) Specialist is responsible for the development, implementation and promotion of QA related activities and compliance in the company. He/ She is also responsible to:

• Establish, implement, maintain & improve the management systems, namely: ISO 9001, ISO 14001, SS 651.
• Establish, implement, review & improve on management systems’ documentations, namely: policy, objectives, manual, procedures, forms, etc.
• Manage all system certification, improvement and upgrade issues.
• Plan, manage and execute all internal and external management system audits to ensure timely closure of issues raised during the audits.
• Plan and conduct management reviews.
• Develop and oversee the implementation of all QA activities and support in HSE activities.
• Follow-up on issues to ensure timely closure of HSEQ-related reports, namely: customer complaint reports, corrective action reports, incident reports, etc.
• Prepare and submit Monthly reports.
• Support in the preparation and submission of the Safety Case.
• Participate as a team member in risk / HSE assessment team.
• Participate in external provider audits, where applicable.
• Co-ordination of Global QA initiatives and projects.
• To perform any other duties or assignments as assigned by superiors.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Mission

Sanofi is preparing its future through an ambitious program named named Evolutive Facility (EVF). The EVF Project is at the cornerstone of Sanofi strategy as it aims at creating a new manufacturing concept consisting of a new generation of evolutive multi-product facilities, modular, adaptable and agile, leveraging new disruptive technologies, to better address business challenges. Digital will be one of the key topics to help EVF to reach its ambition. On top of it, Sanofi is also embarked with the ambition to leapfrog the competition through a digital acceleration program with the following vision: “Sanofi will fully integrate Digital capabilities & culture within its operations to boost business growth and profitability in 2025+”.

In this context, we are looking for one Quality Control Technician to participate in the setting up of the new QC laboratory for our new site based in Singapore.

Key Accountabilities

The mission described below, must be exercised in compliance with health, safety and environment of the site rules.

• Support the set up and routine operations of the new QC laboratory EVF-QC based in Singapore.
• Support the project execution phase through deliverables achievement and operations activities.
• Support the QC laboratory start-up activities, participate in the C&Q and validation activities.
• Responsible for waste management, including liaising with waste management vendor.
• Responsible for sample management, including sample receipt, shipment and disposal.
• Responsible for raw material and drug substance reserve sample management.
• Responsible for external laboratory coordination and management.
• Coordinate and perform raw material sampling.
• Coordinate and perform general laboratory support activities, including procurement and inventory management.
• Support QC equipment calibration and preventive maintenance program.
• Participate and contribute to laboratory continuous improvement.
• Maintain Sanofi standards and values for safety and quality objectives as well as contribute to laboratory performance.

Education and experience

Higher NITEC or Diploma in Pharmaceutical Sciences, Applied Science or related life Sciences or Technology.

Experience in laboratory support in the pharmaceutical or biotechnology industry preferred.

Key technical competencies and soft skills:

• Good understanding of good laboratory practices, good documentation practice and data integrity requirements.
• Experienced in routine laboratory operations and continuous improvements.
• Keen to learn new technologies.

Quality Supervisor (QAQC)

Location: Penjuru Place (shuttle bus provided)

Monday - Friday 8am - 5.30pm

The Quality Supervisor is responsible for ensuring timely and effective implementation of the company's policies, procedures, and standards involved in assuring the quality of manufactured products and customer satisfaction, as well as for conducting quality control activities. The Quality Supervisor strives to ensure the facility adheres to quality licenses, standards and certifications.

A successful candidate will collaborate closely with functional areas such as Manufacturing, Procurement, Mfg. Engineering, Sustaining Engineering, Product Lines, R&M and Geozones regularly as well as presenting to internal teams plans and updates.

Job Responsibilities:

• Supervise and lead Quality Assurance and Quality Control personnel.
• Maintain site Quality Management System.
• Update QMS records and maintain all necessary documentation and certificates.
• Responsible for following management of change as processes and procedures are updated as per QMS requirements.
• Perform regular process audits in Manufacturing areas and functional areas, including technical work instructions, processes, procedures, and competence and ensure compliance.
• Generate CARs related to any deficiencies and track them to completion.
• Keep competency records up-to-date.
• Conduct training related to QMS, procedures, WIs, others.
• Actively participate in Contract Reviews.
• Develop customer QCP Plans. Ensure contractual requirements are built into Quality Control plans.
• Actively participate in Pre-Production meetings.
• Coordinate Client visits, and audits and constant communication to demonstrate our commitment and promote the Corporate Quality Management System.
• Drive action trackers to completion, related to customer audits, manufacturing reviews or qualification process.
• Coordinate TPIs per customer QCPs, and per production schedule. Ensure documentation meet requirements.
• Review/release WOs from a Quality point of view.
• CPARs/NCRs/COPQ; monitor performance/trends, data analysis, and evaluate the effectiveness of corrective actions to ensure that the required improvements are sustained. Actively participate in RCA. Monitor/track other Quality KPIs.
• Coordinate with product design engineers and manufacturing engineers the requirements in the quality plans and inspection and test plans to be aligned with their engineering design criteria, production schedules and customer requirements.
• Coordinate quality assurance plans for new PNs/product introductions.
• Review and approval purchased materials/products mill test certificates if it complies with the required company specifications and/or applicable industry standards prior to acceptance and use.
• Ensure quality control inspection and testing activities are performed in accordance with Global MFG QMS, customer QCPs/Inspection matrices, and/or local procedires and work instructions.
• Manage non-conformance process in accordance with Global MFG QMS.
• Identify a minimum of two continuous improvement projects per year to lead and complete with measurable improvement to the business in terms of margin, quality, etc
• Any other delegated responsibilities as instructed by his direct supervisor within the timeframe specified safely and efficiently to meet business requirements, provided the instruction is reasonable and you are capable and deemed competent to fulfil these.

Job Requirements:

• 5 to 8 years of experience with ISO-9001 and API Q1
• Minimum 5 years of experience in QA/QC role in the manufacturing environment
• Excellent written, reading, and oral communication in English
• Computer literate and familiar with Microsoft Office software at a minimum
• Fast learner, results-oriented and independent with strong interpersonal skills
• Possess strong customer service skills, i.e. listening, follow-through, and willingness to help
• ISO 9001 and API Q1
• Certified Auditor
• Ability to read engineering drawings
• Ability to interpret MTCs (Material Test Certificates) against the Company specifications
• Skilled at data mining (Excel Pivot Tables, other Excel tools)

Preferred

• Lean / Six Sigma experience
• Certified Lead Auditor
• Root Cause Analysis implementation experience
• Power BI dashboards.

Purpose: The role is responsible for handling customer quality issues and continuous improvement activities of the Company products and processes. You are required to drive internal departments on quality-related issues to follow up on effective corrective/preventive actions. You will be liaising with the internal team to support QBR, RMA, IFR, MRB, FAI Review and approval with Supplier and customer, In-Process Audit, FA Launch, 8D, SDR, FPY, tracker processes, and communicate between customer and internal team on Quality related matters.

Key areas of responsibilities:

• Lead and drive customer quality CAB meetings to derive root causes and corrective and preventive actions based on 8D methodology
• Perform ad-hoc visits to customer sites to facilitate investigation and improvement proposal
• Develop, drive, and lead the improvement of manufacturing systems and processes to meet and exceed customer expectations
• Lead and drive company-wide continuous improvement projects with relevant Organizations
• Build and drive customer relationships to improve customer satisfaction
• Perform customer quality performance monitoring and reporting to internal management and customer
• Manage the first article process and submit the report to the customer for approval
• Lead cross-functional team to establish the outgoing inspection checklist for NPI to ensure that the product meets customer requirement
• Analyze customer quality performance to identify trends and improvement opportunities
• Perform manufacturing audit

Qualification & Experiences:

• Degree in Mechanical/Mechatronics/Electrical/Manufacturing Engineering discipline
• At least 5 years of working experience, 3 years in dealing with customer quality managers or direct customer facing, related to the manufacturing environment, preferably from the semiconductor, semiconductor equipment industry, electronics, or high-tech instrument industry
• Strong knowledge and practices in 8D, SPC, FMEA, 6-sigma methodology (Certified Black/Green Belt), and change management
• Good understanding of first-article inspection requirements and expectations
• Excellent leadership and effective communicator with all levels of associates and management
• Experienced in Minitab is an advantage
• Experienced QMS auditor

About us(About SLB)

We are a global technology company, driving energy innovation for a balanced planet.​

Together, we create amazing technology that unlocks access to energy for the benefit of all.​

Our inclusive culture is the key to our success. We collaborate with our internal community of colleagues, alumni, and our valued external partners to support each other and achieve our goals. We aim to raise the bar high. We look for people who are committed to innovation and success and act with integrity to become and be a part of one of the most diverse group of experts in our industry, anywhere around the globe.

Global in outlook, local in practice – and with a united, shared passion for discovering solutions, we hire talented, driven people and support them to succeed, personally and professionally.

Repprts to: Supplier Quality Team Lead

Job Description

The Position holder is responsible for assessing, monitoring and continually improve the quality of parts, products and services delivered by suppliers, and assists in defining and developing quality program status indicators and performance measurements.

Successful Position holders are excellent communicators, proactive, enjoy solving problems, comfortable with multitasking, and work well in teams.

Roles and Responsibilities:

• Participate in Sourcing activities for new part or new supplier, developing and implementing Part and Process Qualification process and in charge of supplier quality evaluation. Ensure First Article Qualification completion.
• ·Manage all aspects of continuous improvement of the quality of parts, products and services delivered by suppliers, including the following:
• Review and analyze supplier quality performance, deviations and returned product reports.
• Investigate and address product non-conformances, working with relevant subject matter experts as needed to ensure corrective and preventive actions address fundamental causes.
• Support development and execution of remedial work plans by suppliers to address quality nonconformances.
• Ensure improvement of the supplier quality engagement programs.
• Conduct supplier quality audit, including planning, execution, reporting results, and remedial work plans. Participate in internal audits.
• Ensure compliance to internal and external management systems.
• Lead and/or participate in Product Quality (PQ) incident report investigations.
• Acquire and analyse data across a spectrum of business environments to facilitate process analysis and improvements. Use metrics, reporting, and process control tools to track, analyse and problem solve.
• Continuously improve knowledge of customer expectations, supplier relations, risk management and improvement, industry standards, business systems, and planning and quality tools.

Qualifications and Experience:

• Bachelor’s Degree in a technical field (Mechanical Engineering, Industrial Engineering, or Electrical Engineering).
• 3 years of industry working experience as quality engineer.
• Experience in quality tools, supplier quality management, and quality management.

Preferred Qualifications and Experience:

• Certified for Quality Engineering.
• Work experience with SAP system.
• Knowledge or work experience in industrial standard and directives such as DNV, ATEX, PED.
• Work experience in heavy machinery technology and manufacturing process.
• Data mining and analysis skills (with Excel, PowerBI, or SharePoint).

Responsibilities

• Support superior in managing day-to-day operating expenditures BPO operating.
• Download U account aging, analysis the outstanding, sending the report to HOD’s/BU, follow-up with the A&P overdue status by weekly.
• Assist BU/GL/Claims team for reverse entry matched wrongly by BU in Exceedra, monitor and update the tracking list till resolved.
• Track the AR main account parking (R13) amount have been deducted on payment, check with BPO/Customer for the documents or details status to clear the park amount.
• Follow-up on dispute A&P cases, Credit Note and Refund status from BU/Customer.
• Coordinate activities related to overdue aging in main account and U aging, propose charge to PnL.
• Implement continuous improvement initiatives to streamline existing A&P processes and improve efficiencies through a better utilization of automated systems.
• Work closely with internal BU/AR in monitoring Clearing A&P issues, update A&P matrix if any movement in BU.
• Monitor daily Exceedra Success & Error Reports, raise ticket to CSSC-Exceedra if received Error report to resolve the issue with BU and CSSC.
• Issues CN for any A&P approved invoices from the BU or Customer portal.
• Other adhoc jobs assigned.

Requirements

• Detail oriented with good communication skills
• Language proficiency – English and preferably Mandarin
• Positive attitude
• Spontaneous and ability to accept new roles and responsibilities
• Minimum Diploma or GCE ‘A’ Level
• At least 3 year work experience in AR, collections or credit control

Roles & Responsibilities

Job Responsibilites

· Collect, clean and pre-process data from various sources to ensure its accuracy and reliability.

· Analyse data using statistical techniques and software tools (Power BI and etc,) to identify trends, patterns, and relationships within the data.

· Develop and maintain data models, reports, and dashboards to visualise and communicate findings to stakeholders.

· Collaborate with cross-functional teams to understand their data analysis and contribute to the development of new methodologies and tools. Collecting, processing and analysing latge datasets to identify trends, patterns, and insights that will help drive data-driven decision making across the project organization.

· Capability in managing a large size of the team.

· Strong analytical skills and logical thinking.

· Demonstrates good organization and communication skills and a creative approach to problem solving.

· Understanding of the intermediate level of project management process.

· Understanding of technical knowledge of the FPSO projects involved.

· Ability, analyze and perform variance analysis between actual and budgeted costs

· PC skills with proficiency in MS Office

· Modec is committed in creating a diverse and inclusive workplace. We take affirmative action to ensure equal opportunity for all applicants regardless of race, religion, national origin, gender, gender identity, sexual orientation, disability, age, or other legally protected characteristics

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities

• Assist with the implementation and maintenance of the Quality Management System in accordance with ISO 9001 and 13485 standards, and in compliance with the H.S.A GDP Guidelines.
• Provide support for investigation into non-conformances and customer complaints.
• Maintenance and Follow-up on Corrective Actions and Preventive Actions (CAPAs).
• Provide the trainings and coordinate the trainings for the staff.
• Registration of the trainings into the electronic Quality Management System (eQMS) and running of reports.
• Assist with the documentation review after an operational activity.
• Collection of Temperature Data and Monitoring of the temperature environmental conditions.
• Reporting of day-to-day activities.
• Take care of and communicate with internal and external contacts.
• Control administrational aspects of the facility (e.g. archiving).
• Promote a “quality” culture within the company.
• Performing physical checks for GMP and GDP related processes

Job Requirements

• Possess at least a Diploma in Pharmacy, Life Sciences or relevant fields.
• Possess at least 2 years of pharmaceutical science work experience (or prior Life Science internship experience) is preferable .
• Experience with ISO 13485 standards is an advantage.
• Knowledge of GMP and/ or GDP guidelines is an advantage.
• Able to work in a fast-paced environment
• Work well independently/with minimal supervision and with others in a team
• Proficient in Microsoft Office especially Excel
• Candidate needs to be based in Singapore.