Main Duties and Responsibilities

· Accountable for qualification of suppliers and co-packers prior to supplying, include activities of document review, supplier liaison and technical review, audits until approval.

· Manage supplier / co-packer audit, end to end co-packer assessment; i.e. conduct audit, provide timely updates on audit status and findings; and monitor co-packer performance post qualification, for full approval

· Responsible for qualification and validation of new lines, new processes and change of equipment. It involves sterility test plan designing and execution; CIP and Hygiene verification to meet F&N requirements before line approval for commercial runs.

· Responsible for qualification of new or alternative raw material, to ensure meeting to F&N food safety, regulatory and documentation requirement.

· To support to manage Quality Plan program for all Business Units, coordinate and engage business unit key stakeholders to review / maintain Quality Plans

· To support in collate and analyze Business units’ performance on food safety and quality compliance, product customer complaint trends and key risk indicators of Business units.

· Responsible for GTQM centralized shared point database, acts as database leader / power user trainer, to keep documents are updated / maintained for Group R&D and BUs reference. Support in Group R&D and Business units user access request processing and user access approval matrix maintenance.

· Act as GTQM Document Controller, ensure document master lists are maintained and updated, initiate documentation development / revision, to ensure document is updated to meet F&N standards and requirements

· Technical support Business units to drive continuous improvement, initiate positive change to deliver an efficient and value-adding process, conduct training or site visit if need to.

· Support to initiate the development and governance of corporate policies, guidelines, procedures.

· Assist in troubleshooting e.g. Quality/ process/ system issues as required

Requirements:

- Min. Degree in any field

- At least 5 years of relevant experience in the similar industry

- Able to work in fast-paced environment

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Mission

Sanofi is preparing its future through an ambitious program named EVolutive Facility (EVF). The EVF Project is at the cornerstone of Sanofi Pasteur strategy as it aims at creating a new manufacturing concept consisting of a new generation of evolutive multi-product facilities, modular, adaptable and agile, leveraging new disruptive technologies, to better address vaccine business challenges. Digital will be one of the key topics to help EVF to reach its ambition. On top of it, Sanofi is also embarked with the ambition to leapfrog the competition through a digital acceleration program with the following vision: “Sanofi will fully integrate Digital capabilities & culture within its operations to boost business growth and profitability in 2025+”.

In this context, we are looking for Specialist II, Quality Operations for our new site based in Singapore.

Key Accountabilities

The mission described below, must be exercised in compliance with health, safety and environment of the site rules.

The Specialist II, Quality Operations will be responsible to partner with the GMP operations team to provide Quality oversight and advice for Quality on-the-floor and operations support to ensure the EVF Singapore GMP Quality operations meets Sanofi global Quality standard requirements and fulfil the applicable regulatory expectations. The Specialist II, Quality Operations shall be experienced in solving complex problems, and strong understanding of cGMP operations and well-versed in multiple Quality systems (including exception management, change controls, deviations/CAPAs and document management system).

The incumbent will partner closely with operational teams (e.g. manufacturing, facilities, Quality control and technical units) to ensure Quality, safety, reliability, efficiencies to support EVF Singapore GMP manufacturing operations.

During the Project Phase, the Specialist II, Quality Operations will participate in the following Engineering / Commissioning & Qualification activities:

Engineering / Commissioning & Qualification activities:

• Review and approval of engineering documents related to GMP operations.
• Support and provide inputs to Installation, Operational Qualification (IOQ) activities for equipment used in GMP operations.
• Review and approval of operational, as well as process related documents (e.g. work instructions, SOPs, batch records).
• Support the digital and automation infrastructure setup including Delta V recipe, MES workflows, other process equipment related systems, ERP module setup, etc.
• Ensure that Quality related operational procedures and infrastructures are successfully implemented in preparation for Engineering runs and PPQ runs at the EVF Singapore Site to support site operational readiness and success.

Provide GMP Quality support during PPQ runs:

• Responsible to provide direct solid Quality advice to GMP operational teams to ensure compliance, reliability and efficiencies.
• Responsible to provide direct QA oversight for all GMP operations (including on-the-floor Quality oversight, raw materials release, deviations, change controls and CAPAs) at EVF Singapore manufacturing facility.
• Represent Quality to triage, resolve on-the-floor operations issues, and participate in root cause investigations.
• Escalate significant Quality issues to Quality management in a timely manner.
• Champion Quality within the Operations team to establish an engrained Quality culture across the organization.

Working hours –

• Personnel shall be able to work office hours (weekdays) in Sanofi Site Office to support collaborations and meetings with stakeholders leading up to Engineering runs.
• Personnel shall be able to work 12 hours rotating shift (including day/night, and weekends) on site to support PPQ runs and Engineering runs, as required.
• Work from Home (hybrid) arrangements are subjected to discussion with Function Manager during the Project Phase.

During  Routine Operations, the Specialist II, Quality Operations shall:

• Be responsible to provide direct solid Quality advice to GMP operational teams to ensure compliance, reliability and efficiencies.
• Be accountable to ensure that Quality related operational procedures and infrastructures are successfully implemented to support EVF Singapore site operational and inspection readiness and success.
• Be responsible to provide direct QA oversight for all GMP operations (including on-the-floor Quality oversight, raw materials release, deviations, change controls and CAPAs) at EVF Singapore manufacturing facility.
• Represent Quality to triage, resolve on-the-floor operations issues, and participate in root cause investigations.
• Escalate significant Quality issues to Quality management in a timely manner.
• Champion Quality within the Operations team to establish an engrained Quality culture across the organization.
• Lead and support the site driven QA continuous improvement initiatives/activities during the routine operational phase.
• Participate in regulatory inspections and interact directly with regulatory inspectors (as applicable).
• Lead and support QA Operations related trainings and coaching for the Quality organization.
• Contribute to reach the EVF Quality manufacturing 4.0 ambition through a Quality plan.

Working hours –

• Personnel must be able to work 12 hours rotating shift (including day/night, and weekends) on site to support production activities.

Education and experience

• Bachelor’s or Master’s Degree in Sciences, engineering or other related technical field.
• Minimum of 5 years of relevant experiences preferably in Manufacturing, Validation, Engineering, Quality in the pharmaceutical or biotechnology industry (preferably in vaccines and/or biologics).

Key technical competencies and soft skills:

• Manufacturing 4.0 mindset (such as Agile methodology)
• Expert Knowledge of regulations and standards of the pharmaceutical industry, Global Quality policies and Data Integrity Requirements.
• Solid manufacturing process technical knowledge.
• Broad understanding of QA Operations (from an end-to-end perspective).
• Strong interpersonal skills to establish the partnerships necessary for the development of an engrained Quality culture and the correct execution in transverse.
• Ability to work independently and make quick, effective decisions under pressure.
• Discipline and assertiveness in the decision-making and execution of digital manufacturing strategy.
• Familiarity with electronic batch record (MES) and related review processes.
• Familiarity with batch release and disposition process, preferably using the SAP system.
• Proficient in QMS and Quality Risk Management Principles.
• Excellent verbal and written communication skills; effective communication and presentation skills across different levels of the organization, including senior management and execution levels.
• Experience in facility start-ups will be advantageous.
• Good understanding of risk-based decision framework.
• Familiar with Digital 4.0 concepts and potential applications in Quality.

Job Responsibilities

• Software design and optimization, focusing on coding and debugging
• To design, develop, and maintenance of iPhone Apps
• Maintain existing mobile apps on the IOS platform
• Troubleshoot and debug to optimize performance
• Knowledge of Java, Kotlin, MSSQL, and C#
• Develop application programming interfaces (APIs) to support mobile functionality
• Use and adapt existing web applications for apps
• Troubleshoot and debug to optimize performance
• Design interfaces to improve user experience
• Ensure all developments are of high quality and comply with the required specifications
• Stay up-to-date with the technology trends, security and data protection, concepts and best practices for coding mobile apps

Job Requirements

• Candidates must possess at least a Diploma/ Degree in Information Technology/ Computer Science/ Computer Engineering
• hands-on proficiency in iOS app development
• Familiar with Mobile Application Development life cycle
• Demonstrable portfolio of released applications on the App store market
• Good interpersonal and communication skills in English
• Excellent project and time management skills
• Patient, polite, friendly and helpful personality
• Creative and able to work independently and as team in a stimulating multi-disciplinary environment emphasizing team work
• Able to cope with fast paced-environment
• Experience in web application development is an added advantage

· At least 10 years experience

· Willing to work on holidays/work on shifts/change of shift

· Able to work for long hours

· Can work between different locations

• Set detailed guidelines on what needs to be checked and what the quality standards are
• Update our Quality Management System (QMS) with incidents, fixes and improvements
• Audit our systems based on ISO 9001:2015 requirements
• Determine quality metrics for all manufacturing procedures
• Monitor the entire production cycle and perform regular tests to identify potential malfunctions as early as possible
• Inspect product materials and electrical systems for defects and durability
• Identify the root of technical issues and recommend fixes
• Prepare reports on malfunctions and corrective actions (e.g. number of defective raw materials per order)
• Review current blueprints and quality documentation
• Set and track quality assurance goals (e.g. reduce average turnaround time for quality checks by 20%)
• Coordinate with external quality assurance auditors and technicians to ensure legal compliance
• Work with internal teams to increase customer satisfaction by improving the quality of the products

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Descriptions:

* Development & Implementation of Instrumentation & Control, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Implementation of Process Automation, Instrumentation and Control, Testing and Commissioning, Technical Support, Customer Service, PLC Programming, SCADA / HMI programming, Computer and Server, Industrial Networking

* Responsible for design & development, implementation, onsite testing & commissioning, support, documentation and training

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Relevant graduate degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance. Fresh graduates are welcome.

* Hands on experience in instrumentation implementation

* Knowledge of Building Automation & Process Control

* Experience in BMS / PLC / HMI process control / automation system, onsite commissioning

* Good technical skills in Allen-Bradley / Siemens PLC programming, SCADA

* Strong problem-solving and analytical skills

* Hardware configuration and software coding

* IT knowledge for Server/Client and Infrastructure

* Electrical, instrumentations and control knowledge

* Customer orientated

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Able to interact well with vendors.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Basic Functions:

1. Assist in maintaining company’s compliance to quality management system established.
2. Responsible in monitoring the calibration and maintenance program.
3. Responsible in internal and external audit program.
4. Ensure that ISO 13485, In-vitro Diagnostics Directive 98/79/EC, IVDR 2017/746 and 21 CFR Part 820 Quality System Requirement, MDSAP (Medical device Single Audit Program), ISO 9001 are properly implemented and maintained at all levels.
5. Establish and maintain proper document archiving and control system.

Duties:

1. Assist in maintaining company’s compliance to quality management system established.
2. Responsible in internal and external audit program.
3. Assist in handling the corrective and preventive action system and its sub-system (i.e. Nonconforming product and internal audit).
4. Ensure that proper document control procedure and system is implemented for Product Specifications, Operation Manuals, Standards, Drawings and all quality related documents.
5. Co-ordinate, review, collate, update and issue all quality-related documents to relevant personnel.
6. Responsible in calibration and maintenance program
7. Responsible in the equipment validation and process validation.
8. Ensure that all documents submitted and/or generated are archived.
9. Perform other duties as assigned.

Requirements:

Ability to:

1. Demonstrate the use of all equipment, materials, and techniques relevant to job performance, execute and maintain pertinent validation protocols as required and maintain quality standards.
2. Establish quality assurance system and undertake systems / product / process validations.

Knowledge of:

Various quality control/process control requirements, quality management system and documentation relating to biomedical and /or IVD products. Technical terminology used in the laboratory, assigned scientific techniques and knowledge of QC procedures governing a number or basic laboratory operations

Education: Basic Science Degree

Experience: 5yrs of relevant experiences. Experiences in ISO 9001 or ISO 13845 is a plus. Certification with lead auditor or internal auditor is a plus.

Functions:

• Lab Technician in quality & technical for chemistry production process for food additive.
• Hands-on with HPLC and GC knowledge and be part of the in-quality process of production.
• Maintain and develop quality manual and processes, develop procedures as according to HACCP, ISO and task team for Halal and Kosher requirements.
• Will be involved in hands-on, R&D, technology, development of processes and hands-on to learn the fundamentals of chemical food additive production including scaling-up
• Some regulatory knowledge in Pharmaceuticals, Personal Care/Cosmetics and technical application knowledge development.
• Successful candidate with open minds for development, will be groomed for future opportunities.

Knowledge, Skills and Requirements:

• Higher NITEC / Diploma in chemicals, pharmaceuticals, personal care/cosmetics related.
• Minimum 1 year R&D working experience in Chemical / Chemistry in emulsifiers or related emulsification know-how and a strong understanding of chemical processes, will be advantageous.
• Some knowledge in Halal, Kosher, ISO procedures and RSPO will be advantages and keen interest in regulatory environment.
• Ability to converse in 2nd language (e.g like Bahasa or Mandarin etc), would be advantageous and a great passion for lab and production environment that includes on shifts as when required, a high curious mind and a strong desire to excel and part of a great team.

Basic Functions:

• Assist in maintaining company’s compliance to quality management system established.
• Responsible in monitoring the calibration and maintenance program.
• Ensure that ISO 13485, In-vitro Diagnostics Directive 98/79/EC, IVDR 2017/746 and 21 CFR Part 820 Quality System Requirement, MDSAP (Medical device Single Audit Program) are properly implemented and maintained at all levels.
• Establish and maintain proper document archiving and control system.

Duties:

• Assist in maintaining company’s compliance to quality management system established.
• Assists in internal and external audits.
• Responsible in handling the corrective and preventive action system and its sub-system (i.e. Nonconforming product and internal audit).
• Ensure that proper document control procedure and system is implemented for Product Specifications, Operation Manuals, Standards, Drawings and all quality related documents.
• Control and compile Production / QC Master Batch Records and ensure that the Quality Records Master List is updated. Together with the Documentation Center, ensure that all documents submitted and/or generated are archived.
• Co-ordinate, review, collate, update and issue all quality-related documents to relevant personnel.
• Prepare necessary documentation (e.g. Certificate of Analysis and Certificates of Origin) to support shipment of products overseas.
• Control and compile Production / QC Master Batch Records and ensure that the Quality Records Master List is updated. Ensure that all documents submitted and/or generated are archived.
• Receive Production / QC Records and all quality related documents and ensure that proper document archiving and control system is implemented.
• Ensure that all documents submitted and/or generated are archived.
• Compile and ensure that the Quality Records Master List is updated.
• Perform other duties as assigned.
• Support the projects of material qualification
• Any other duties as and when assigned.

Minimum qualification Requirements

Ability to:

• Demonstrate the use of all equipment, materials, and techniques relevant to job performance, execute and maintain pertinent validation protocols as required and maintain quality standards.
• Establish quality assurance system and undertake systems / product / process validation

Knowledge of: Various quality control/process control requirements, quality management system and documentation relating to biomedical and /or IVD products. Technical terminology used in the laboratory, assigned scientific techniques and knowledge of QC procedures governing a number or basic laboratory operations.

Education: Basic Science Degree

Experience: No prior working experience is required for Executive position. At least 3 years of relevant working experience for Senior Executive position.

Primary Function

1. Manage technical projects to explore, develop new formulations and applications for use in either food, beverages, nutraceuticals, pharmaceutical and nutritional applications.
2. Involved in formulations and leading towards production. Develop new formulations and testing protocols and improve formulations and outputs excellence.
3. Build relevant formulation & application knowledge on the use of sucrose esters in novel product formats (E.g. Formulation mixes in various food applications to cosmetics applications).
4. Source & procuring of raw materials and build up applications intelligence with various ingredients and additives.
5. Hands-on spirit and comfortable in laboratory and actively contribute novel ideas to the R&D efforts.
6. Starting with a regional to global scope and an excellent opportunity to build and develop with global clients across the business.
7. Technical services front facing customers, relating to food applications as well as formulations and role is a growing role in the organization.

Knowledge, Skills and Requirements

1. Minimum a diploma and/or degree in Personal Care / Cosmetics / Pharmaceutical / Food Science / Chemistry. Some insights to pharmaceutical or personal care, cosmetics and perfumery or emulsifiers, will be an advantage.
2. Highly familiar with food ingredients and experience in formulations of ingredients, additives, premixes and emulsions systems, will be added advantage. At least some experience in application related to flavor / color / bioactive ingredients. Exposure to food ingredients / additives sourcing and purchasing experience, will be a plus.
3. High entrepreneur spirit, good project management skills, able to multitask, good team player. Have the drive to develop technical projects into new business opportunities.
4. Strong in IT skills like Microsoft Word, Powerpoint, Excel and at least bilingual in spoken and written in English and Mandarin and/or another language for technical presentation and communication with the customers.
5. A strong drive and self-motivation and ability to learn in a fast pace working environment in the global market and ability to travel and provide technical service when required.

Responsible to monitor the quality of incoming and outgoing products or materials to ensure that the products meet the required standard and sometimes making suggestions to improve quality or efficiency.

- Able to operate and create program for CMM Machine

- Experience in Precision Machining/Engineering Industry

- Minimum of 2 years hands-on exposure in quality inspection of Machined/Painted metal parts

- Knowledge in using measuring instruments preferred

- Proficient in spoken and written English

- Able to work overtime and weekends (if required)

Job Responsibilities:

Provide effective support and assistance to the Team Leader / Deputy Group Head in the daily operations of the Operations Control Group (OCG) mainly Account Services, Credit Limit Setup, Audit Confirmation & related Customer Services.

• Process transactions / requests in compliance with the Bank's Policy & Procedures, Head Office Rules in alignment with the local and related overseas laws and regulations. End-to-end understanding in terms of Controls associated with transaction / request processing must be robust.
• Observe the rules and regulations of the Compliance Manual of the Bank associated with the Anti-Money Laundering, KYC requirements, MAS regulations, etc.
• Participate actively with the Team Leader / Deputy Group Head in resolving operational issues, and manage change projects (including Business Analysis, support UAT planning & execution).
• Identify areas to improve the operational efficiencies (proactively contribute to Time & Cost Savings) and effectiveness (controls) of the Group, and propose and support the implementation of improvements of workflows & processes.
• Investigate and report discrepancies and irregularities arising from transactions, system failure, etc. and resolve issues including handling customer / stakeholder's complaints and escalating all issues promptly.
• Participate actively in the various Business Continuity Plan Drills which are held regularly by the Bank and the local regulatory authority.
• Cross-train other colleagues within Team OCG to ensure there is sufficient back-up to cover each process from time to time.

Job Requirements:

• Degree in Banking & Finance or equivalent.
• At least 3-5 years of Banking experience in Managing Customer Account Setup, including Maintenance, Offboarding & issuance of Audit Confirmation.
• Proficient in Microsoft Office with immediate Microsoft Excel skills.
• Possess critical thinking skills, and able to link diverse information to build a full picture and spot inconsistencies.
• Meticulous, attention to detail with a risk and control mindset.
• Good oral & written communication skills, strong inter-personal skills, and a strong customer service aptitude.
• Reliable team player, who is able to work with a diverse group of people.
• Keen and proactive learner.
• Effective time management skills, ability to work under pressure and meet cut-off times.

To perform Quality Control functions within the Material Receiving, Label Control, Distribution and Production areas in order to assure material and products are sampled and released in compliance with agreed specifications and timelines.

Responsibilities:

Quality Control functions within Material Receiving:

• Perform incoming goods sampling, inspection and approval.
• Ensure any customer specific requirements have been carried out by Logistics during booking-in and Quality Control during the approval process.
• Sample materials upon customer request.
• Carry out expiry and status changes of materials upon request.
• Travel abroad when required to aid the inspection, approval and sampling of materials for Almac Clinical Services.
• Ensure Sampling areas are cleaned and perform area clears after sampling has been completed.
• Ensure Almac Clinical Services adherence to cGMPs, SOPs and Customer instructions through performance of job function.
• Monitor storage area environmental conditions.

Quality Control functions within Label Control and Distribution:

• Inspect and approve Clinical Labels prior to issuance to packaging operations, distribution and direct dispatch from Almac Clinical Services. Record results electronically.
• Perform electronic inventory transactions to make labels available to Production.
• Advise Label Control and Distribution personnel on accept / reject criteria and on general issues.
• Approve Label Verification projects used to perform a fully automated inspection of labels.
• Approve randomisation files for use by the label verification system.
• Apply and remove electronic holds on distribution orders.
• Perform verification checks on documentation and clinical material prior to distribution from Almac Clinical Services.
• Approve Depot Shipment paperwork.

Quality Control functions within Production:

• Perform regular in-process quality checks on products, processes, room layout and safety to ensure compliance with GMP and Almac Clinical Services procedures Perform end of operation documentation checks and associated electronic transactions.
• Advise Production personnel on accept/reject criteria and on general issues.
• Review log books and perform facility inspections.
• Instruct Production personnel on cleaning methods and perform area clearance checks, this includes the corridors and changing areas.
• Perform sampling and Inspection operations as requested.
• Perform calibration checks on balances and scales used in the Almac Clinical Services facility.
• Accompany Almac approved contractor when performing Environmental Monitoring.
• Travel abroad when required to aid the inspection of labelling operation.
• Perform inspection on JTM related activities e.g. printed clinical labels, labelled clinical materials and review JTM batch documents.

In General:

• Perform Destruction duties as required.
• Assist in client audits.
• Instruct relevant personnel on cleaning methos in the event of spillage.
• Monitor environmental conditions in storage and production areas. Alert QC Supervisor / Manager immediately when there is an excursion of environmental condition.
• Assist with the allocation and prioritising of duties for Materials Receiving, QC Label Control & Distribution and Production personnel.
• Check documentation for completeness and accuracy. Identify any deviations from written procedures and inform relevant personnel.
• Assist and deputise for the Quality Control Supervisor.
• Contribute to the review and writing of quality procedures, including the development of new SOPs and revision of existing SOPs.
• Assist with training and development of QC Materials Receiving, QC Label Control & Distribution and Production personnel.
• Attend meetings when required.

Criteria:

• Diploma in sciences or life sciences discipline
• Knowledge of GMP
• Excellent verbal and written communication skills
• Ability to demonstrate a logical approach to problem solving
• Ability to use initiative and to prioritise tasks
• Ability to work to consistent high standard under pressure
• Be willing to train others when required
• Ability to demonstrate strong attention to detail

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

Job Highlights

• Permanent Position
• Competitive salary and benefits package
• Opportunity to work on exciting and challenging projects
• Great opportunities for learning & career advancement
• Transport provided at Tuas Crescent MRT

Responsibilities:

• Reviews Client's technical documentation and requirements.
• Defines engineering requirements.
• Prepares the technical documentation for instrumentation and systems requisitions and performs the technical evaluations.
• Provides technical support to Project group.
• Optimizes instrument systems ensuring minimal cost and simplification in compliance with the required performance.
• Prepares specifications for instruments, systems (DCS, ESD, F&G) and installation.
• Prepares functional analysis (control, ESD, F&G).
• Implements instrument detail design on P&ID's.
• Prepares instrument data sheets and loop diagrams.
• instrument hook-up diagrams.
• Implements detail engineering activities (layouts, routings, supports...).
• Performs the F.A.T. & T & C
• Design, develop and implement PLC & SCADA systems.
• Other ad hoc duties as assigned by the Management.

Requirements:

• Bachelor’s Degree in Instrumentation and Controls engineering discipline or equivalent
• 5 years of experience in energy business related engineering management and project management (engineering and construction)
• Experience in power and water utilities as well as renewable energy projects is preferred
• Good knowledge of local services and solutions specializing in treatment of water and wastewater.

Careers That Change Lives

This role will lead initial set up of Quality Systems for a new entity to meet local medical device regulations and China Good Manufacturing Practices.

A Day In The Life:

This role will Ensure products manufactured by contract manufacturer meet all defined specifications and are developed and manufactured in compliance with all applicable quality system requirements and provide leadership to work with different Medtronic entities and set up the strong relationship to support the implementation of Quality Systems for the new entity in implementing China localization strategy.

Primary Responsibilities

• Set up the Quality Systems to it meets Singapore, China and requirement countries requirement.
• Establishes quality programs and initiatives to ensure products and assemblies are developed and manufactured per applicable requirements.
• Establish strong supplier control and Quality oversight over suppliers and Medtronic entities.
• Driving continual and preventive improvement of quality management systems in supporting the conformity of process and product quality.
• Supports and develops systems for the identification, analysis, correction, and prevention of quality issues.
• Contributes quality expertise to product development and manufacturing transfers including working closely with suppliers to implement robust manufacturing processes and Quality oversight.
• Oversees and lead key quality systems processes to ensure its effectiveness which includes Design Control, Supplier Controls, Quality Planning, Document Controls, Training, Audits, Change Controls, Nonconformance CAPA, Manage External Requirement, etc.
• Leads the site audit readiness and manages, conducts and coordinates external (Singapore, China, ISO, etc.) audits.
• Take preventive actions to improve the compliance and effectiveness of Quality Management Systems by proactive learning from other sites and best practices from the industry.
• Provides QA support, participate and collaborate with Operating Units improvement program
• Works with local management team members in developing long and short-term quality goals and strategies.
• CAPA board memberParticipate in CAPA and board meetings to review the trending of all input sources and determine if any further action is needed
  Perform review on the CAPA investigation, action plan and effectiveness to determine if CAPA process requirement are fulfilled.
  
• Represents the new entities to collaborate with peers across all Operating Units for global quality initiatives and works closely with peers on similar quality concerns between Medtronic sites

Responsibilities

• Perform AML monitoring/review on Trade post-transaction files.
• Review/investigate Trade manual screening alerts and red flag escalated by trade processing team for potential sanction violations in accordance with SMBC policies.
• Ensure that review and investigation conclusions are adequately and properly documented for regulatory/audit level review.
• Coordinate and/or prepare the required management information reporting data as applicable
• Perform daily name screening alert clearance
• Investigate and report discrepancies and irregularities arising from transactions, system failure, etc and resolve issues including handling stakeholder’s complaints and escalating all issues to Group Head / Deputy Group Head promptly.
• Other tasks as assigned by Group Head / Team Lead
• Regular update of Procedures and Manuals to ensure the group operations is in accordance to SMBC policies, audit comments and in compliance to local as well as related overseas law and regulations
• Contribute in key initiatives and other ad hoc projects as needed

Requirements

• Bachelors degree
• Able to link diverse information to build a full picture and spot inconsistencies
• Possesses knowledge of MAS regulation on AML and Sanctions requirements including KYC, Screening
• Strong team player
• Good communications skills, hands on, independent and proactive in carrying out investigation on customers and/or transactions. Able to work with front office and back office

Responsibilities

• Plan, supervise and execute projects and tasks based on the objective set by Management.
• Solve and prevent problem occurrence and to increase customer satisfaction on Product Quality.
• Perform quality, env. and water efficiency system maintenance in the company.
• Support in maintaining & upkeep ISO 9001, ISO 14001, IATF1694, ISO 17025 and ISO 13485 and ISO 46001 in the company.
• Understand company’s Quality, Env., Water Efficiency and OH&S Policy and Objectives, Env. aspects and impacts, Safety news, Safety risk assessment, Information Security risks, etc.
• Perform internal QEMS and WEMS audit and coordination with internal dept for external QEMS and WEMS audit, provide support for customer audit and perform vendor audit.
• Monitoring production dept. quality failure cost.
• Perform calibration & maintenance of x-ray machine, ensure good housekeeping of X-ray equipment’s area and update monthly schedule report of x-ray machine.

Requirements

• Minimum 2 years experiences in engineering or quality assurance field.
• Preferably with experience in supplier management and product qualification.
• Strong understanding of automotive 5 core tools (APQP, PPAP, MSA, FMEA, SPC) and good working knowledge of Minitab or JMP application will be added advantage.
• Good knowledge of 8D problem solving tools (Fishbone diagram, 5-Why, etc.) is preferred.

Shift Type / Work Hours

Normal Shift (5 days work week)

7.50am to 4.55pm

Benefits

1. Company transport provided at designated pick-up points island-wide.
2. Medical insurance and dental coverage.
3. In-house canteen at subsidized prices.

Please visit our corporate website for more information on Seiko Epson Corporation

Become part of a cohesive team dedicated to delivering optimised outcomes in the dynamic hydrocarbon market under the refinery robust conditions. We are seeking a Production Control Planner who thrives in a collaborative environment and is keen to make a significant impact to the refinery production and supply chain. Both experienced and fresh graduates are welcome to apply.

Key Responsibilities:

• Coordinate with stakeholders to develop daily production plans and develop Oils Planning strategy for major Turnaround.
• Oversee execution of production plans through close coordination with Operations and stakeholders.
• Collaborate with feedstock and supply teams to ensure timely feedstock discharges and product loadings.
• Maximize refinery HVP (High Value Product) yield through blending optimization.
• Maximise revenue through proactively identifying, evaluating, and implementing optimisation opportunities
• Coordinate with stakeholders to address and resolve quality or plant issues promptly, while ensuring safe operations.
• Identify and address gaps in planning and production processes, and product qualities

Requirements:

• Degree in Chemical Engineering
• At least 3 years’ experience in petrochemical or oil refinery industry. Fresh graduates may be considered, and relevant training will be provided.
• Strong analytical, problem-solving, and inter-personal skills.
• Experience with workflow automation, data visualisation, or scheduling software will be an added advantage

Responsibilities

• Plan, supervise and execute projects and tasks based on the objective set by Management.
• Solve and prevent problem occurrence and to increase customer satisfaction on Product Quality.
• Perform quality, env. and water efficiency system maintenance in the company.
• Support in maintaining & upkeep ISO 9001, ISO 14001, IATF1694, ISO 17025 and ISO 13485 and ISO 46001 in the company.
• Understand company’s Quality, Env., Water Efficiency and OH&S Policy and Objectives, Env. aspects and impacts, Safety news, Safety risk assessment, Information Security risks, etc.
• Perform internal QEMS and WEMS audit and coordination with internal dept for external QEMS and WEMS audit, provide support for customer audit and perform vendor audit.
• Monitoring production dept. quality failure cost.
• Perform calibration & maintenance of x-ray machine, ensure good housekeeping of X-ray equipment’s area and update monthly schedule report of x-ray machine.

Requirements

• Minimum 2 years experiences in engineering or quality assurance field.
• Preferably with experience in supplier management and product qualification.
• Strong understanding of automotive 5 core tools (APQP, PPAP, MSA, FMEA, SPC) and good working knowledge of Minitab or JMP application will be added advantage.
• Good knowledge of 8D problem solving tools (Fishbone diagram, 5-Why, etc.) is preferred.

Shift Type / Work Hours

Normal Shift (5 days work week)

7.50am to 4.55pm

Benefits

1. Company transport provided at designated pick-up points island-wide.
2. Medical insurance and dental coverage.
3. In-house canteen at subsidized prices.

Please visit our corporate website for more information on Seiko Epson Corporation

• To conduct QC inspection and record on all the incoming materials.
• To attend to any complaint from sites.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• To prepare all the Quality-related reports.
• Any other duties instructed by the Manager.

Job Description:

• To ensure electrical, instrumentation and control engineering technical scope performance meeting the project specification, budget and stakeholder expectation.
• Identify and responsible the electrical, instrumentation and control engineering deliverables.
• Responsible the electrical, instrumentation and control engineering change order and meeting the delivery lead time and stakeholder expectation.
• Able to read and implement the project technical specification to the project deliverables.
• Attend client/ consultants meeting for technical clarifications and related activities.
• Facilitate the generation of the control, electrical and instrumentation engineering risks and mitigations for the project risk register.
• Manage the electrical and instrumentation package vendors and review vendors’ quotation
• Ensure CIE engineering is completed accurately within schedule and budget
• Conduct FAT/SAT and equipment troubleshooting
• Prepare panel drawings, circuit drawings and all electrical documents
• Prepare instrument data sheets and instrument list
• Prepare automation engineering documentation such as functional description specifications, control philosophy, control system architecture
• Design of Electrical & Instrumentation panels based on water and wastewater treatment process requirements (focus on RO & MBR applications basis)
• Identify instruments, electrical equipment and components to procurement.
• Any other duties commensurate with the role.

Requirements:

• Degree in electrical engineering, electrical and electronics engineering, control and instrumentation or related fields
• Experience in water and wastewater treatment projects a plus
• 5 years and above experience.
• Experience in the industries standard, NORSOK, NEK, PSA, IEC, BS & etc. and hazardous areas classification.
• Willing to travel overseas
• Good verbal and written communication skills in English • General computer knowledge is essential (MS word, excel, PowerPoint, MS Outlook).

Job Description & Requirements

• Review the inspection history to summarize the integrity status of the plant equipment and piping systems.
• Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.
• Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan
• Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).
• Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.
• Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.
• Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.
• Provide recommendations and timely updates on equipment degradation problems.
• Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.
• Preparation of final inspection reports with all findings, abnormalities and recommendations.
• Ensure quality of inspected items to meet project requirements and standards.
• Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.
• Read, understand project related ITP, procedures, specification requirements.
• Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.
• Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication
• Knowledge in welding inspection Eligibility Criteria
• Graduate Engineers with 3-6 years of relevant experience.
• Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.
• Experience in Refinery and Oil & Gas must
• Experience in QA/QC and Knowledge in Non-Destructive Testing methods.
• Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.
• Work Independently and can work in Singapore and other countries.
• Fluent Reading, Speaking and Writing in English.
• Willing to commit 24 months contract/ project completion.
• Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.
• Energetic & Result Orientated.

Main duties and responsibilities:

To support the local team in all QEHS related compliance and performance of TES Singapore sites, which includes but not limited to emergency response (drills and TTX), incident investigation and IH monitoring, etc. Also, includes all Environmental related matters and regulatory reporting, global QEHS procedures & programs and overall lead for all QEHSMS / R2 audits, 3rd party certifications and customer audits as well as supporting Group EHS.

Environment:

• Reporting of QEHS performance metric reporting and activities to Global/ Group EHS Manager.
• Provide guidance on QEHS best practice principles, techniques and culture in Singapore sites.
• Compilation and submission of annual recycling data and other relating environment related info to relevant competent authorities.
• Maintain Basel Permit / Import Approval of all sites, including applications and tracking of movement documents.

Audit:

• Ensure Singapore sites are aware of and complying with Corporate/ Group QEHS policies, standards and programs, and local legislations.
• Program lead for 3rd party (ie. QEHSMS & R2) audits and key customer accounts on QEHS audits, provide resource and preparing Singapore sites with upcoming audits, tracking & reporting of audit results and monitor closure of corrective actions.
• Develop and conduct Singapore sites QEHS Audit program to ensure compliance to EHS regulations and Global EHS standards. Track & report audit results and monitor closure of corrective actions.
• Analyse data from EHS audits (including 3rd party QEHSMS & R2 certification audits and key account QEHS audits) to identify trends and provide feedback and preventative measures.

Other support:

• Support the development & implementation of One TES IMS – global QEHS procedures and programs.
• Monthly tabulation and submission of Basel permits status reporting for Exco meeting.
• Provide coordination and administrative support to QEHSMS & R2 certification program in Singapore.
• Support global initiative programs / activities as assigned.

Job Requirements:

• Diploma / Degree in any Engineering discipline and registered WSHO and FSM.
• Good to have: Qualified industrial first aider, noise monitoring office or any other IH related experience.
• Proficient in English and Mandarin and good report writing skills, familiar with Microsoft office.
• Trained in/ familiar with ISO 14001, ISO 45001, ISO 9001 and Responsible Recycling (R2) or equivalent.
• Experience with handling government agencies and knowledge in license and permit application from agencies such as NEA, MOM, SCDF, PUB and SPF.
• 5-8 years of working experience as in WSH related fields or equivalent in manufacturing / electronic or chemical industries.
• Experience in conducting ISO 9001/ ISO 14001/ ISO 45001/ R2 audits or handling OSH related audits.
• Good communication skills, team player, responsible, take initiatives and work independently without much supervision.

Good to have:

• Registered WSHO & FSM.
• Proficient in English, Mandarin and good report writing skills, familiar with Microsoft office with auditing experience in ISO 14001, ISO 45001 or ISO 9001.
• At least 5-8 years of working experiences as in WSH related fields or equivalent in manufacturing/ electronic or chemical industries.
• Good leadership skills to be able to guide and lead a team of EHS professionals.