The School of Electrical and Electronic Engineering is one of the founding Schools of the Nanyang Technological University. Built on a culture of excellence, the School is renowned for its high academic standards and research. With more than 130 faculty members and an enrolment of more than 4,000, of which close to 1,000 are graduate students, it is one of the largest EEE schools in the world and ranks 10th in the field of Electrical & Electronic Engineering in the 2024 QS World University Rankings by Subjects.

We are looking for a Research Fellow/Research Associate who will be responsible to lead the effort to translate high-level audio algorithms implemented in other audio prototyping software into a high-performance, architecture-specific code and will work closely with other researchers to design and implement DSP algorithms that meet system-level constraints. The Research Fellow/Research Associate will also be defining and implementing software architecture for real-time audio systems on prototype hardware containing a multitude of co-processors.

Key Responsibilities:

• Writing, debugging, optimizing and testing of source code with an emphasis on audio applications
• Maintenance and improvement of existing audio algorithm code base including noise reduction, acoustic echo cancellation, automatic gain control, voice activity detection, packet loss compensation and other audio enhancements
• Supporting Research and Feasibility Studies including defining the scope and goals of audio research tasks and completion of detailed reports on results and recommendations for development activities
• Software development of new algorithmic audio processing solutions including the existing areas mentioned above and additionally including state of the art audio codecs, audibility and intelligibility enhancements, microphone array processing, noise control, 3D audio and other audio effects and enhancements
• Project management tasks including creation and maintenance of requirements and schedule documentation for assigned projects, project budget etc.
• Publish journal and conference papers as dictated by the assigned projects.
• Provide guidance of PhD/Master/undergrad students.

Job Requirements:

• PhD/Masters in Electrical and Electronic Engineering/Computer Engineering field
• More than 1-2 years research experience in related area
• Strong audio signal processing fundamentals (for example, Fourier analysis, transfer functions, filtering, linear algebra, matrix algebra etc)
• Perform independent research and development of emerging and future audio technologies
• Experience conducting acoustic measurements using standard acoustic equipment (speakers, microphones, anechoic chambers, acoustic mannequins)
• Ability to communicate findings and ideas to other teams and to management using both written documents and Keynote presentations
• Ability to effectively contribute in a fast-paced, cross-functional environment
• Preferred experience with spatial audio and HRTFs, acoustic room modeling, collecting, organizing and analyzing large data sets.
• Experience with speaker or microphone arrays, or machine learning is a huge plus
• Proficiency in basics of programming languages such as C, C++ and Python
• Excellent communication skills. (Both written and verbal)

We regret that only shortlisted candidates will be notified.

Seeking a driven and fit personnel. The candidate will be reporting to the Manager and supervising all functions of pickup and delivery in Qxpress.Candidates are preferred to have a minimum of 1 year of working experience in the relevant field. All other candidates will also be considered if shown keen interest in logistics work.

Job Responsibilities:

• Oversee and monitor last mile deliveries.
• Serve as the primary point of contact for addressing customer inquiries and concerns.
• Manage the processing of delivery returns from drivers and customers.
• Ensure that key performance indicators are achieved set by supervisor or manager.
• Ensure adherence to safety protocols and standard operating procedures.

Job Requirements:

• Minimum of 1 year(s) of working experience in relevant field, candidate who shown keen interest in logistics work will also be considered.
• Must be physically fit.
• Strong time management skills.
• Meticulous and detail oriented.
• Ability to communicate with all partners via calls and emails.
• Ability to complete multitask within given timeline.
• Class 3 license will be an advantage.
• Singaporeans Only.

Remuneration:

• Basic Salary - $2100 (Probation) to $2300 (Confirmation)
• Performance Incentive: $300 monthly for good attendance & performance! (No lateness or absence)
• Tenure allowance - after 1st/2nd/3rd year anniversary of employment the employee is eligible for $150-$500/monthly tenure allowances
• Mobile Phone Allowance
• Meal Allowance for overtime more than 2 hours on top of normal working hours - $10
• Overtime pay eligible

Other information:

• 12 days annual leave
• 14 days sick leave/60 days hospitalization

Working Hours: 5.5 days/week

• Monday to Friday : 9am to 6pm
• Saturday : 9am to 1pm

Please submit your updated resume through the Apply Now link.

Job Description

• Carry out pest inspections, pest management services and treatments at various locations and properties
• Submit service report promptly
• Other ad-hoc duties as assigned

Requirements:

• Candidate must possess Vector Control Technician Certificate by NEA
• No experience needed as training will be provided

Job Description & Requirements

Job Description & Responsibilities:

The Lead Quality Engineer will:

a) Cultivate a continual improvement culture and “design for quality” mindset within the project team.

b) Collaborate with cross-functional teams to ensure project processes comply with project specifications and Company requirements during the FEED and Execution Phases of the project.

c) Assist the Project Quality Manager in implementing the Project Quality Plan, which is developed by the Standards and Compliance section of the Project Management Office.

d) Assist the Project Quality Manager to ensure that the Project Execution Plan is duly followed by the Project Team.

Key Responsibilities

• Quality Focus : Develop and review Quality documents ensuring alignment to Company and Project requirements during FEED and Execution Phases.Assist the Project Quality Manager to implement and maintain the Project Quality Plan and other quality deliverables as per Company requirements.Conduct and participate in project audits according to the audit program, monitoring the resolution of findings and corresponding corrective actions.Review, comment and approve Subcontractor / Supplier documents based on Company and Project requirementsAssist in setup and coordination of Classification Society (CS) and Regulatory Compliance (RC) management framework together with CS and RC coordinators;Involve in Quality Walks during site quality surveillance when required Assist to manage the project lessons learned and initiate improvements and ensure experience transfer.
• Collaborative Coordination: Engage with different departments, suppliers, and subcontractors as necessary to integrate quality requirements into project specifications.Assist to attend Technical Bid Clarification Meetings (BCMs) and review/response Technical Bid Clarifications during Feed PhaseAssist in planning, promoting, organizing, and conducting QAQC training activities for the project team and subcontractors.Assist to attend Pre-Inspection Meetings with Supplier Quality Engineers/Vendor Inspection Coordinators and Package Manager/Engineer on critical equipment and packages.
• Analytical Skills and Problem Solving: Monitor quality trends and prepare and present reports to the Project Quality Manager and relevant teams as needed.Collect, compile, and analyze relevant quality statistical data to measure/monitor quality performance level against project KPIsInvolve in investigation and addressing customer complaints regarding quality.Coordinate and monitor the root cause analysis of non-conformities, correction and corrective actions, and site observations.

Job Description & Requirements

Job Description & Responsibilities:

The Lead Quality Engineer will:

a) Cultivate a continual improvement culture and “design for quality” mindset within the project team.

b) Collaborate with cross-functional teams to ensure project processes comply with project specifications and Company requirements during the FEED and Execution Phases of the project.

c) Assist the Project Quality Manager in implementing the Project Quality Plan, which is developed by the Standards and Compliance section of the Project Management Office.

d) Assist the Project Quality Manager to ensure that the Project Execution Plan is duly followed by the Project Team.

Key Responsibilities

• Quality Focus: Develop and review Quality documents ensuring alignment to Company and Project requirements during FEED and Execution Phases.Assist the Project Quality Manager to implement and maintain the Project Quality Plan and other quality deliverables as per Company requirements.Conduct and participate in project audits according to the audit program, monitoring the resolution of findings and corresponding corrective actions.
• Collaborative Coordination : Engage with different departments, suppliers, and subcontractors as necessary to integrate quality requirements into project specifications.Assist to attend Technical Bid Clarification Meetings (BCMs) and review/response Technical Bid Clarifications during Feed Phase Assist in planning, promoting, organizing, and conducting QAQC training activities for the project team and subcontractors.
• Analytical Skills and Problem Solving : Monitor quality trends and prepare and present reports to the Project Quality Manager and relevant teams as needed.Collect, compile, and analyze relevant quality statistical data to measure/monitor quality performance level against project KPIsInvolve in investigation and addressing customer complaints regarding quality.Coordinate and monitor the root cause analysis of non-conformities, correction and corrective actions, and site observations.

Job Requirements

• Experience : Min. 10 years of QAQC experience with at least 3 years in a leadership/supervisory role. Min of 2 FPSO/FSO Projects Completion.
• Skills : Proven track record with strong coordination skills. Excellent planning and organizing skills.Excellent communicator Excellent collaborator with cross-functional teams In-depth knowledge of quality management system (ISO 9002, API Q1/Q2).

Job Description & Requirements

Job Description & Responsibilities:

The Lead Quality Engineer will:

a) Cultivate a continual improvement culture and “design for quality” mindset within the project team.

b) Collaborate with cross-functional teams to ensure project processes comply with project specifications and Company requirements during the FEED and Execution Phases of the project.

c) Assist the Project Quality Manager in implementing the Project Quality Plan, which is developed by the Standards and Compliance section of the Project Management Office.

d) Assist the Project Quality Manager to ensure that the Project Execution Plan is duly followed by the Project Team.

Key Responsibilities

• Quality Focus: Develop and review Quality documents ensuring alignment to Company and Project requirements during FEED and Execution Phases.Assist the Project Quality Manager to implement and maintain the Project Quality Plan and other quality deliverables as per Company requirements.Conduct and participate in project audits according to the audit program, monitoring the resolution of findings and corresponding corrective actions.Review, comment and approve Subcontractor / Supplier documents based on Company and Project requirementsAssist in setup and coordination of Classification Society (CS) and Regulatory Compliance (RC) management framework together with CS and RC coordinators.
• Collaborative Coordination Engage with different departments, suppliers, and subcontractors as necessary to integrate quality requirements into project specifications.Assist to attend Technical Bid Clarification Meetings (BCMs) and review/response Technical Bid Clarifications during Feed PhaseAssist in planning, promoting, organizing, and conducting QAQC training activities for the project team and subcontractors.Assist to attend Pre-Inspection Meetings with Supplier Quality Engineers/Vendor Inspection Coordinators and Package Manager/Engineer on critical equipment and packages.
• Analytical Skills and Problem Solving:Monitor quality trends and prepare and present reports to the Project Quality Manager and relevant teams as needed.Collect, compile, and analyze relevant quality statistical data to measure/monitor quality performance level against project KPIsInvolve in investigation and addressing customer complaints regarding quality.Coordinate and monitor the root cause analysis of non-conformities, correction and corrective actions, and site observations.

Job Requirements

• Experience: Min10 years of QAQC experience with at least 3 years in a leadership/supervisory.
• Skills: Proven track record with strong coordination skills.Excellent planning and organizing skills.Excellent communicator Excellent collaborator with cross-functional teams In-depth knowledge of quality management system (ISO 9002, API Q1/Q2)

Roles & Responsibilities

Qualification

• Diploma or Degree in related Engineering studies
• Work Experience of 5years minimum in related field
• Work Experience of 12years minimum if degree is non related.

Job Description

• To liaise with customers on quality issues / requirements for new / existing parts.
• To specify, implement and review appropriate inspection method / equipment / tool to meet customers' quality requirements.
• To analyze and implement appropriate corrective actions to resolve quality issues.
• To evaluate and determine the appropriate acceptable quality limit and plan for inspections.
• To liase with customers
• To trial and improve inspection method or program for complex or complicated inspection.
• To evaluate new inspection equipment / tool / software.
• To specify and evaluate packaging method / materials for new / existing parts.
• To guide and provide training to Inspectors/Technicians in performing inspection as per inspection plan

Job Responsibilities:

1. Handle customer complaints and quality related queries
2. Implement customer requirements, carry out product quality plan for all projects and ensure PQP effectiveness
3. Implement quality tools in production to support corrective and preventive actions and continuous improvement
4. Part and line approval follow up (Qualification Package) throughout the project
5. Supplier Quality Management
6. Handle quality issues and liaise with cross-functional team towards improvement
7. Ensure related documents are updated accordingly for lesson learnt and continuous improvement

Job Requirements:

• College degree of Science/ Engineering
• Experience in quality control and customer/supplier quality management
• Experience in incoming, manufacturing and customer service area
• Familiar with quality tools and have basic knowledge of six sigma
• Familiar with the knowledge of IATF 16949 standard and 5 Tools (PPAP/APQP/SPC/MSA/FMEA)
• Good inter-personal and presentation skill
• Self-motivated and good team player

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

SR Quality / Quality Lead/ Supervisor (QAQC)

Location: Penjuru Place (shuttle bus provided)

Monday - Friday 8am - 5.30pm

The Quality Lead/ Supervisor is responsible for ensuring timely and effective implementation of the company's policies, procedures, and standards involved in assuring the quality of manufactured products and customer satisfaction, as well as for conducting quality control activities. The Quality Supervisor strives to ensure the facility adheres to quality licenses, standards and certifications.

A successful candidate will collaborate closely with functional areas such as Manufacturing, Procurement, Mfg. Engineering, Sustaining Engineering, Product Lines, R&M and Geozones regularly as well as presenting to internal teams plans and updates.

Job Responsibilities:

• Supervise and lead 4 Quality Control Inspectors and liaise with internal & external stakeholders.
• Maintain site Quality Management System.
• Update QMS records and maintain all necessary documentation and certificates.
• Responsible for following management of change as processes and procedures are updated as per QMS requirements.
• Perform regular process audits in Manufacturing areas and functional areas, including technical work instructions, processes, procedures, and competence and ensure compliance.
• Generate CARs related to any deficiencies and track them to completion.
• Keep competency records up-to-date.
• Conduct training related to QMS, procedures, WIs, others.
• Actively participate in Contract Reviews.
• Develop customer QCP Plans. Ensure contractual requirements are built into Quality Control plans.
• Actively participate in Pre-Production meetings.
• Coordinate Client visits, and audits and constant communication to demonstrate our commitment and promote the Corporate Quality Management System.
• Drive action trackers to completion, related to customer audits, manufacturing reviews or qualification process.
• Coordinate TPIs per customer QCPs, and per production schedule. Ensure documentation meet requirements.
• Review/release WOs from a Quality point of view.
• CPARs/NCRs/COPQ; monitor performance/trends, data analysis, and evaluate the effectiveness of corrective actions to ensure that the required improvements are sustained. Actively participate in RCA. Monitor/track other Quality KPIs.
• Coordinate with product design engineers and manufacturing engineers the requirements in the quality plans and inspection and test plans to be aligned with their engineering design criteria, production schedules and customer requirements.
• Coordinate quality assurance plans for new PNs/product introductions.
• Review and approval purchased materials/products mill test certificates if it complies with the required company specifications and/or applicable industry standards prior to acceptance and use.
• Ensure quality control inspection and testing activities are performed in accordance with Global MFG QMS, customer QCPs/Inspection matrices, and/or local procedires and work instructions.
• Manage non-conformance process in accordance with Global MFG QMS.
• Identify a minimum of two continuous improvement projects per year to lead and complete with measurable improvement to the business in terms of margin, quality, etc
• Any other delegated responsibilities as instructed by his direct supervisor within the timeframe specified safely and efficiently to meet business requirements, provided the instruction is reasonable and you are capable and deemed competent to fulfil these.

Job Requirements:

• 5 to 8 years of experience with ISO-9001
• Minimum 5 years of experience in QA/QC role in the manufacturing environment
• Excellent written, reading, and oral communication in English
• Computer literate and familiar with Microsoft Office software at a minimum
• Fast learner, results-oriented and independent with strong interpersonal skills
• Possess strong customer service skills, i.e. listening, follow-through, and willingness to help
• Certified Auditor
• Ability to read engineering drawings
• Ability to interpret MTCs (Material Test Certificates) against the Company specifications
• Skilled at data mining (Excel Pivot Tables, other Excel tools)

Preferred

• Lean / Six Sigma experience
• Certified Lead Auditor
• Root Cause Analysis implementation experience
• Power BI dashboards.