Responsibilities:-

• Person in charge of the workplace on environmental regulations pertaining to the Environmental Public Health (Registration of Environmental Control Officers) Regulations 1999 Person in charge of the workplace implementation and revision of Environmental Management in the worksite
• Act as an Earth Control Measures Officer (ECMO)
• Establish, update, maintain, and implement the Environmental Management System and Environmental Impact Aspect assessment
• Conduct / Plan site environmental inspection and ensure effective implementation and continual improvement on all environmental matters. Advise occupier of the workplace or other person in charge of the workplace on environmental health problems and recommend remedies to establish a healthy working environment
• Oversee the installation of noise meters at site vicinity and monitoring of construction works noise to ensure it does not exceed the permissible noise levels throughout various stages of construction phases
• Coordinate with external pest control operator visits to carry out fumigation, mosquito oiling and rodent control measures. This is to ensure effective control on site
• Liaising with National Environment Agency & Public Utilities Board (PUB) on environmental issues and other statutory requirements of compliance by sites
• Updates on codes of practice & environmental literature and circulates information to each level of employees

Requirements:-

• Must possess Environmental Control Officer Certificate and registered with National Environmental Agency (NEA)
• Min 2 years’ relevant experience

Job description:

1. To plan, organize and monitor all activities relating to quality assurance to maintain quality standards and systems to meet customer requirements.

2. To define and control the characteristics of each part, affiliated with appropriate Inspection Plans; and make available the required facilities to verify these characteristics.

3. To oversee and approve First Article inspection procedures prior to sample submission to customers.

4. To issue material certificate to meet customer requirements.

5. To liaise with customers on matters related to quality.

6. To conduct/co-ordinate Material Review procedures to implement any Corrective/Preventive Action; and follow-up for a closure with result of satisfactory action taken.

7. To approve disposal of non-conforming items.

8. To ensure all inspections are conducted correctly.

9. To control and manage the Equipment Calibration System; setting the frequency of each calibration.

10. To report quality performance and critical discrepancy issues to General Manager.

11. To propose to General Manager an indicative rate of annual salary-increment and annual bonus of his subordinates reflected through the past year performance.

12. To approve the application of various type of Leave of his subordinates.

13. To approve petty-cash paid to his subordinates.

14. To recruit and upgrade his subordinates with relevant training programs and sue practical experiences.

15. To train subordinates in Sampling and Inspection techniques.

Experience Required:

At least 5 years experience in a Quality Control Management.

Skills required

1. Well-versed in ISO 9001:2000 requirement.

2. Quality Control System.

Qualification required

1. Mechanical/Manufacturing/Engineering Degree.

IT Exposure

1. Computer literate in MS Office.

2. Application knowledge in Autocad.

PharmEng Technology has been providing quality services to leading manufacturers of healthcare and pharmaceutical products since 1997. Our specialists hold expertise in Commissioning & Qualification, Validation, Quality Systems, Regulatory Affairs, Engineering, and Training to ensure that our clients can keep on providing the world with their cost-effective and high-standard healthcare products. At PharmEng Technology, we strive to cultivate the best working environment where empowerment, passion and perseverance are nurtured while serving our clients to achieve their unique business goals. We are seeking an experienced Quality Control Analyst with experience in pharmaceutical company/Life Science industries for a role in Singapore.

Key Responsibilities:

• Sample storage and management
• Prepare and support analytical testing
• Analytical testing and documentation
• Perform lab housekeeping activities
• Perform administrative documentation
• Comply with all HSE guidelines
• Detect and report potential accident, risks and propose solutions
• Responsible for participating in initial training and retraining

Qualifications:

• Proficient in English.
• Previous experience working in a laboratory environment in the pharmaceutical industry (quality assurance, production).
• Diploma or Bachelor's Degree graduate

This position is for permanent 12-hr night shift, 2-3-2 basis.

Why PharmEng Technology?

Our consultants come from different areas of the Pharmaceutical/Biotech/Medical Device industries and have extensive experiences obtained from world-class organizations in North America, Europe, and Asia. At PharmEng Technology, we value everyone’s unique talents and work together to support our clients. We offer continuous career growth, competitive wages, opportunities for travel and a team mentality that sets us apart from our competitors. It is the growth of our staff that continues to grow our company globally.

EEOC Statement

At PharmEng Technology, we don’t just accept difference — we celebrate it, we support it, and we thrive on it for the benefit of our employees, our clients, and our community. PharmEng Technology is proud to be an equal opportunity workplace.

AEDAS is a leading global design practice dedicated to creative excellence and diversity in the built environment. We are a global platform for the most talented architects and designers, focused upon delivering locally-celebrated solutions for cities, communities and clients. Our global network of 12 offices forms a diverse staff base with skills across all sectors in architecture, interior design, building consultancy, master planning, landscape and urban design.

To support our continuous growth and expansion in Asia, AEDAS Singapore is seeking a committed candidate for the following position:

DOCUMENT CONTROL ASSISTANT / DOCUMENT CONTROLLER

Responsibilities:

· To take direction from Document Control Manager

· To be able to work as a proactive team member

· Management & filing of all Project documentation (Outgoing & Incoming)

· Preparation of Document Issue Packages to meet Project stage deliverables as defined by the Project Team Leader

· Checking that all documents meet defined AEDAS standards before being transmitted, and to highlight non-compliances to team members responsible. i.e. File name & drawing nomenclature compliance (Checked against any earlier revisions).

· Maintenance of Electronic PDF in project folders reflecting:

o AEDAS “Current“ Documents (Drawings, Specifications, Reports)

o “Current” Documents from all other Consultants

o “Current” Documents from Contractors as Submission Packages documents

· Downloading, Internal distribution and eventually filing of contractor submissions

· Uploading of commented documents via Workflow

· Assistance in preparation of and updating the distribution matrix as and when required, and advising all changes as appropriate

· Production of Reports to include but not limited to;

o Incoming & Outgoing reports on a weekly basis

o Tracking registers to record receipt & return of submittals

o To maintain & manage RFI tracking lists

o To highlight to team leaders any late items not yet responded

o Other reasonable tasks as required by Doc Control Manager & Team leaders

Requirements:

· Document Control Assistant - 1 year of working experiences in Electronic Document Management System (EDMS) environments, such as Aconex, Procore & BIM360 Documents

· Document Controller - 4 years of working experiences in Electronic Document Management System (EDMS) environments, such as Aconex, Procore & BIM360 Documents

· To fully engage with the usage of Electronic Document Management System (EDMS) and any other electronic document control systems pertinent to a project.

· Illustrate a positive, proactive attitude

· Logical approach to work with a consistent attention to detail

· A full understanding of AEDAS IMS and its supporting documents

· Ability to cope with conflicting demands, to be able to proactively highlight any conflicts of priorities and suggest action plans to resolve issues

Please submit a copy of your updated CV including your current salary, expected salary and notice period to [email protected].

What You Will Do:

• Collaborate with top-tier game R&D teams to implement comprehensive risk management strategies, ensuring quality assurance from the design phase through to the game launch.
• Experience the gameplay design, leveraging your extensive gaming experience to provide constructive feedback aimed at elevating the user experience.
• Utilize a range of tools and methodologies to conduct thorough and meticulous game testing. Follow up on issue resolutions to ensure a seamless game launch.
• Uphold and maintain stringent standards at all times, continually striving to enhance R&D processes. This effort aims to improve team efficiency and the quality of outputs, thereby contributing to the development of first-rate products.

What We Are Looking For:

• Passion for games and extensive gaming experience, with high standards for game quality. Hardcore gamers are preferred.
• Exceptional logical thinking skills with a strong aptitude for learning; be patient, detail-oriented, accountable, and adept at identifying and resolving issues.
• Strong communication skills, coupled with the ability to drive progress and collaborate effectively within a team; ability to perform well under pressure.
• Excellent written and verbal communication skills in English and fluent oral Chinese to liaise with teams.

Bonus Points:

• Foundational knowledge in computer science and programming skills.

Job Responsibilities:

· Support continuous improvement efforts in daily operation and operations activities.

· Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.

· Analyse and provide timely respond to customer complaints.

· Interface with Customer and Operations to ensure product transfer to manufacturing are in accordance with approved requirements.

· Review mill cert, WPS, WQT, PQR

· Communicate with customer, 3rd party, prepare ITP and etc.

· Prepare Quality performance metrics and reports.

Requirements:

· Degree in Mechanical Engineering, Quality, or equivalent.

· Minimum 3 years work experience in Quality Management System in manufacturing environment.

· Good knowledge of ASME IX, AWS D1.1, ISO 9001, API is preferred.

· Strong command of English language, both oral & writing.

· Knowledge of subsea, structure, metal working industry is preferred.

· Knowledge of risk assessment principles and methods.

· Positive & proactive attitude.

About the Role

In this role, you will be a core member of our Operations team, specifically in Aftersales. We are looking for a talented Aftersales Quality Support Coordinator to join our team.

Your Team

You will report directly to the Operations Director, and this is an independent contributor role.

What You Will Do

• Managing Distributors’ Product Failure ReportBeing the 1st contact point for distributors to report product failure on the field.
  Work with Global Quality Team to investigate quality failure related matter.
  Follow up Failure Analysis Report with Global Quality Team.
  Maintaining a good relationship with distributors’ service center to cross share technical and product knowledge.
  
• Managing RMA reportsAnalysis failure pattern from RMA for improvement of next generation product development.
  Periodical visits to distributors’ Service Centre for RMA stock count, and contributing suggestions for improvement of regional service centres.
  
• Proving feedback and constructive suggestions on product quality to the Global Quality TeamAttending Weekly Quality Improvement conference calls.
  
• Providing technical solutionsWorking closely with the Global Quality Team to enhance product knowledge and assist distributors’ service centers.

What You Need

• Proven experience in quality support coordination.
• Ability to work with distributors externally, as well as internal stakeholders globally.
• Ability to work independently and as part of a team.

What is Nice to Have

• Adaptable to ambiguity, changes and be at the forefront to lead change in both actions and behaviour.
• Ability to work independently and collaboratively in a culturally-diverse team environment, and understanding what it means to achieve success with others and through others.
• Excellent communicator and able to perform well in a matrixed organization. Proven experience in managing and influencing a network of local senior managers, managers or distributors in a cross functional team.

What Makes You Eligible

• Any offer of employment is conditioned upon the successful completion of background reference checks.

What We Offer

• An inclusive and diverse work environment that fosters and encourages career development opportunities.
• Flexible work schedule with a culture encouraging work-life integration and collaboration in a global environment.
• Professional development opportunities through HARMAN University’s business and leadership academies and extensive course catalogue.
• Access to employee discounts on world-class HARMAN products (JBL, Harman/Kardon, etc.).
• “Be Brilliant” employee recognition and rewards program.

JOB DESCRIPTION

The Senior Marketing Executive is responsible for managing end-to-end marketing initiatives and development of creative content (online and offline) to generate awareness and drive usage of services/products for the various business units. You will also play an important role in the building of the company brand profile and achieving business objectives.

RESPONSIBILITY

• Support and deliver strategic marketing plans that drive brand awareness and business objectives.

• Manage end to end marketing campaigns/promotions and activities (including conceptualizing, creative development and implementation) to drive brand awareness and usage of products & services.

• Liaise with internal & external stakeholders to ensure end-to-end delivery of marketing campaigns in an organized and timely manner.

• Manage and develop online and offline materials to support the marketing, business development and corporate teams - brochures, step guide, and ensuring alignment to company’s brand guideline.

• Assist in the management and development of digital content for social media and other digital media. Update the effectiveness of marketing plans to management & provide actionable intuitions for improvements

• Craft and activate media campaigns to drive company’s website traffic across channels like Search Engine Optimization (SEO), social media marketing, email marketing, and content marketing.

• Analyze campaign metrics and ensures it aligns with the goals of the campaigns.

• Identify market opportunities and competitor liabilities to maximize marketing campaign ROI.

• Take the lead to negotiate and work with various partners to establish agreements that benefit both parties, boosting brand visibility and generating leads.

• Provide support to other corporate functions to promote strategic initiatives

JOB REQUIREMENT

• At least Diploma in Marketing, Communications, Business or any relevant discipline

• Minimum three (3) years of relevant marketing experience, including digital marketing

• Proficient in Social media platform and online design tool

• Strong command of written English, preferably with experience in copywriting

• Excellent interpersonal and communication skills

• Result oriented, motivation driven & able to multitask

5.5 working days

8am - 5pm (Monday to Friday)

8am - 12pm (Saturday)

Roles & Responsibilities

• Analysing documents (e.g., design, requirements, architecture, diagrams, flowcharts) to obtain an understanding of the requirements.
• Identifying the required test scenarios, test case preparation, test data preparation and document traceability matrix to ensure sufficient test coverage.
• Execute test cases and test plans to support the quality assurance activities throughout the software lifecycle.
• Defect reporting and verifying fixes.
• Participate in continuous improvement in quality of test process.
• Participate in peer reviews of test plans and cases to ensure consistency and adequate coverage.

Requirements

• IT degree with atleast 5 years of experience in Software testing
• Ability to meet the challenges associated with ensuring a project activity is completed on time, on budget and to specification and quality requirements regardless of the hurdles encountered
• Ability to think strategically, solve problems and negotiate effectively and Ability to multitask and with excellent prioritization skills
• Excellent interpersonal, presentation and pitching skills to connect with diverse audience
• Ability to coordinate test resources internally and externally
• Ability to work effectively with across levels and across the organisation

JOB DESCRIPTION:

• Responsible for day-to-day business data management and regular business report preparations, which includes SAP material master maintenance, data integrity checking and statistics.
• Daily monitoring of basic system health and to flag out any inconsistency in API/System functions when found/reported.
• Daily monitoring of system backend jobs and ensure transactional data are interfacing in healthy state with external/internal system.
• To support Business Analytics, extracting and reorganizing original data, dealing with data related issues with other departments.
• Responsible for data preparation, data mining, to create/identify opportunities through analytics, to optimize business objectives.
• Communicate findings and insights to relevant stakeholders in order to assist Manager in making data-driven decisions in KPI assessments.
• Drive continuous improvements /optimization of campaign performance tracking report with business while complying to A*STAR policies.

REQUIREMENTS:

• Minimum Diploma, preferably Business Analytics, Information systems or Computer Science.
• Strong analytical skills, with experience solving problems using data and providing practical business insights.
• Self-Starter with a strong sense of urgency.
• Aptitude to challenge the status quo, think outside the box, and question what has been done.
• Comfortable with dealing with sets of data points from different sources.
• Qualities of matured thinking, dependable and requires minimum supervision.
• Excellent communication skills (oral and written).

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION:

• Responsible for day-to-day business data management and regular business report preparations, which includes SAP material master maintenance, data integrity checking and statistics.
• Daily monitoring of basic system health and to flag out any inconsistency in API/System functions when found/reported.
• Daily monitoring of system backend jobs and ensure transactional data are interfacing in healthy state with external/internal system.
• To support Business Analytics, extracting and reorganizing original data, dealing with data related issues with other departments.
• Responsible for data preparation, data mining, to create/identify opportunities through analytics, to optimize business objectives.
• Communicate findings and insights to relevant stakeholders in order to assist Manager in making data-driven decisions in KPI assessments.
• Drive continuous improvements /optimization of campaign performance tracking report with business while complying to A*STAR policies.

REQUIREMENTS:

• Bachelor's Degree preferably Business Analytics, Information systems or Computer Science.
• Strong analytical skills, with experience solving problems using data and providing practical business insights.
• Self-Starter with a strong sense of urgency.
• Aptitude to challenge the status quo, think outside the box, and question what has been done.
• Comfortable with dealing with sets of data points from different sources.
• Qualities of matured thinking, dependable and requires minimum supervision.
• Excellent communication skills (oral and written).

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION:

• Responsible for day-to-day business data management and regular business report preparations, which includes SAP material master maintenance, data integrity checking and statistics.
• Daily monitoring of basic system health and to flag out any inconsistency in API/System functions when found/reported.
• Daily monitoring of system backend jobs and ensure transactional data are interfacing in healthy state with external/internal system.
• To support Business Analytics, extracting and reorganizing original data, dealing with data related issues with other departments.
• Responsible for data preparation, data mining, to create/identify opportunities through analytics, to optimize business objectives.
• Communicate findings and insights to relevant stakeholders in order to assist Manager in making data-driven decisions in KPI assessments.
• Drive continuous improvements /optimization of campaign performance tracking report with business while complying to A*STAR policies.

REQUIREMENTS:

• Diploma (with at least 5 years or more relevant experience), preferably Business Analytics, Information systems or Computer Science.
• Strong analytical skills, with experience solving problems using data and providing practical business insights.
• Self-Starter with a strong sense of urgency.
• Aptitude to challenge the status quo, think outside the box, and question what has been done.
• Comfortable with dealing with sets of data points from different sources.
• Qualities of matured thinking, dependable and requires minimum supervision.
• Excellent communication skills (oral and written).

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities

• Plan and conduct internal audits to ensure compliance in preparation for external audits.
• Assist in implementation of Halal standards. Responsible for compliance with MUIS Halal Standards, application and renewal of Halal Certification.
• Conduct regular audit on personal hygiene, food quality, food hygiene and employee safety at Central Kitchen.
• Conduct food quality, food hygiene and system audit of all vending machines.
• Conduct in-house staff training (eg. personal hygiene & food safety, workplace safety & fire drill).
• Assist in product development projects (eg. raw ingredients, processing equipment, packaging materials).
• Assist in developing SOPs and checklists for Central Kitchen and vending machines.
• Assist in the application and renewal of vending machine licences.
• Handle customer complaint - investigation and report. Maintain documentation.
• Track, analyse and execute corrective/preventive action initiatives for non-conformance and complaint issues.
• Monitor overall quality and food safety of operations from receiving to delivery. Recommend corrective actions in the event of non-compliance. Set up necessary systems to achieve requirements.

Requirements

• Bachelor's degree in Food Science, Food Technology, Culinary Science, Quality Assurance or related disciplines.
• Minimum 2 years of work experience in QAQC related field in food industry, preferably from food manufacturing/food service/food retail.
• Familiar with food regulatory/retail hygiene requirement is an added advantage.
• Good knowledge in FSMS / QMS / GMP / GFSI / HACCP / HALAL certification and Food Safety is preferable.
• Good command of English (written and spoken).
• Strong analytical & problem-solving skills.
• Positive attitude, eager to learn and able to adapt quickly.
• Display strong initiative and able to work independently.
• Possess resourcefulness to seek out creative ideas and methods to achieve targets.
• Able to start work within short notice.

About Us:

We are the independent expert in assurance and risk management. Driven by our purpose, to safeguard life, property, and the environment, we empower our customers and their stakeholders with facts and reliable insights so that critical decisions can be made with confidence. As a trusted voice for many of the world’s most successful organizations, we use our knowledge to advance safety and performance, set industry benchmarks, and inspire and invent solutions to tackle global transformations.

About the role:

We are seeking a skilled graphic designer to join our team at DNVs Supply Chain and Product Assurance business area. The graphic designer will play a crucial role in shaping and maturing the visual identity of the business area and implementing this across all our channels to ensure communications and marketing materials are visually appealing and on-brand. This role requires creativity, attention to detail, and the ability to work on multiple projects simultaneously while maintaining high standards of quality.

Key responsibilities

1. Visual content creation:Develop and produce high-quality graphics for both digital and print formats
   Create designs for marketing materials, reports, brochures, flyers, banners, events stands
   Design engaging social media graphics and other digital assets
   Collaborate with the social media manager to create visual content for campaigns and posts
   Collaborate with the business development team to support the design and visual identity of sales collateral such as customer presentations
   
2. Brand consistency:Work with the brand manager to maintain DNV’s brand guidelines across all visual marketing material
   Ensure all design work aligns with the DNV’s identity and messaging.
   Examine existing processes, identify improvement areas, and create solutions that improve design capabilities
   Help the brand manager update and maintain internal databases for designs, photography, and video
   
3. Project management:Manage multiple design projects simultaneously while meeting deadlines.
   Work with cross-functional teams to understand project requirements and deliver designs that meet business objectives.
   
4. Creative collaboration:Participate in brainstorming sessions to develop new design ideas and concepts.
   Work closely with the wider marketing team and external designers as necessary to produce cohesive and effective visual communications.
   Translate complex concepts into compelling visuals
   
5. Continuous improvement:Stay updated with the latest design trends, tools, and software.
   Continuously seek feedback to improve design quality and effectiveness.
   

About you:

Skills and qualifications:

• Bachelor’s degree or equivalent in Graphic Design, Visual Arts, or a related field.
• Proven experience as a Graphic Designer, with a strong portfolio of previous work.
• Proficiency in design software including the Adobe Creative Suite (Photoshop, Illustrator, InDesign).
• Experience with video editing
• Strong understanding of visual design principles, typography, colour theory, and layout.
• Excellent attention to detail and organizational skills.
• Ability to work independently and as part of a team.
• Good communication skills to effectively present and explain design concepts.

Desired skills:

• Experience with motion graphics
• Basic knowledge of web design.

What we Offer:

• Flexible work arrangements for better work-life balance.
• Guaranteed Annual Wage Supplement.
• Generous Paid Leaves (Annual, Compassionate, Marriage, Maternity, Paternity & shared parental leave, Adoption leave, Childcare & Extended Childcare Leave, Examination leaves, National Service (NS) leave, medical leave, Prolonged Illness leave)
• Medical benefits (Clinical treatment, Emergency Medical Services, Specialist Consultation, Paediatrician Consultation, Inoculations (Hepatitis, H1N1 & Flu), Dental
• Treatment, Annual Medical Examination, Hospitalization & Surgical Benefits)
• Maternity Benefits
• Pension and Insurance Policies (Central Provident Fund, Group Term Life Assurance, Group Personal Accident Insurance, Travel Insurance, Work Injury Compensation Insurance)
• Training and Development Assistance (Training Sponsorship, On-The-Job Training, Training Programme)
• Additional Benefits (Long Service Awards, Professional Membership, Gym Subsidy, Mobile Phone Reimbursement)
• Company bonus/Profit share

*Benefits may vary based on position, tenure/contract/grade level*

About Us:

We are the independent expert in assurance and risk management. Driven by our purpose, to safeguard life, property, and the environment, we empower our customers and their stakeholders with facts and reliable insights so that critical decisions can be made with confidence. As a trusted voice for many of the world’s most successful organizations, we use our knowledge to advance safety and performance, set industry benchmarks, and inspire and invent solutions to tackle global transformations.

About the Role:

The Lead Auditor will be responsible for the following:

• Perform 3rd party AS9100/9110/9120 audits for South Asia customers.
• Provide timely and accurate reviews of customer corrective action and closure.
• Provide customers with timely, complete and accurate reports of their current level of conformity / implementation of their management system.
• Maintain schedule of audit activity with customers.
• Maintain appropriate auditor credentials / qualifications and pursue advancement of those credentials and other related credentials as needed.
• Contribute to the growth and development of a world-class, industry-leading auditing team.
• Conducting AS9100, AS9110 & AS9120 Foundation Training and AS Internal auditor course.
• Provide sales support when required.

About You:

• Bachelor’s Degree in Engineering.
• At least 5 years actual work experience in design, development and manufacturing in Aviation, Space or Defence industry and some Part 145 Maintenance, Repair & Overhaul activities.
• Currently qualified as an auditor of AS9100/9110/9120 is preferred.
• Familiar with special processes such as NDT, Heat Treatment, Surface Treatment, Brazing & Welding, etc. will have advantage.
• Familiar with FAA, EASA, CAAS, CAAC, JCAB, DGCA, Airworthiness requirements.
• Expertise with Microsoft Excel, Word and PowerPoint.
• Strong presentation and communication skills.
• A strong attention to detail, coupled with an uncompromising dedication to ethical and professional behaviour.
• Capable of working effectively both in team environments as well as individually.
• Willingness to travel to customer sites (overseas) and perform audits as required, up to 75% of the time.

What we Offer:

• Flexible work arrangements for better work-life balance.
• Guaranteed Annual Wage Supplement.
• Generous Paid Leaves (Annual, Compassionate, Marriage, Maternity, Paternity & shared parental leave, Adoption leave, Childcare & Extended Childcare Leave, Examination leaves, National Service (NS) leave, medical leave, Prolonged Illness leave).
• Medical benefits (Clinical treatment, Emergency Medical Services, Specialist Consultation, Paediatrician Consultation, Inoculations (Hepatitis, H1N1 & Flu), Dental Treatment, Annual Medical Examination, Hospitalization & Surgical Benefits).
• Maternity Benefits.
• Pension and Insurance Policies (Central Provident Fund, Group Term Life Assurance, Group Personal Accident Insurance, Travel Insurance, Work Injury Compensation Insurance).
• Training and Development Assistance (Training Sponsorship, On-The-Job Training, Training Programme).
• Additional Benefits (Long Service Awards, Professional Membership, Gym Subsidy, Mobile Phone Reimbursement).
• Company bonus/Profit share .

*Benefits may vary based on position, tenure/contract/grade level*

Roles & Responsibilities

Cellvec Pte Ltd is currently looking for an experienced & Passionate QA professional who can fully support our clinical and commercial GMP manufacturing of Cell & Gene Therapy Products.

This role will provide you the opportunity to lead key activities to progress your career, these responsibilities include some of the following:

• Lead a team of QA professionals to manage and oversee all the areas of GMP operations. Always ensure inspection readiness.
• Effectively manage Change controls, Deviations, OOS, QRM, Document management, Trainings, Audits, Batch release, Qualifications & Validations, Business support, Trends & Reports, Annual Product quality review etc
• Supports regulatory and client audits as Quality subject matter expert.
• Provide QA expertise for cGMP documents including, but not limited to, SOPs, batch records, media fill/APS protocols and reports, validations, Qualifications, Environmental monitoring, Risk assessment and specifications.
• Strategize, plan and organise the team's resources to perform operations.
• Plan and develop working knowledge and stakeholder management of the team of Quality professionals.
• Promote the Quality culture on Site through exemplary behaviours.
• Ensures the implementation of adequate training for aseptic gowning, aseptic qualification, practices and QA observations.
• Participates in review of policies and policymaking.
• Ability to communicate quality operations and compliance perspective effectively to senior management.
• Understands and articulates company business strategy. Maintains a broad view of the business recognizes changes and trends in the appropriate area in which the individual operates.
• Responsibility to drive the focus on safety to the QA staff and into functional areas that routinely support CT/GT manufacturing.
• Any other tasks as and when assigned by the Supervisor.

Ideally, we are looking for candidates with these criteria’s:

• Minimum of Degree in Biochemistry/Microbiology/Biotechnology discipline. Master degree and above are preferred.
• A minimum of 10 years’ experience in the pharmaceutical/Biotech industry, preferably in CGT manufacturing and its GMP compliance.
• Demonstrated experience with helping operations to prepare for Regulatory GMP inspection. Experience managing HSA, USFDA, EU & Client audits are preferred.
• Experience in leading internal, External and regulatory audits. Experience formulating the audit responses and CAPA
• In-depth understanding of cGMP regulations and regulatory requirements of Biotech/Cell and gene industry.
• Strong experience, Extensive knowledge and hands-on experiences of handling Sterile pharmaceutical/Biotech manufacturing processes.
• Ability to apply optimal quality assurance standards to promote a business edge.
• Ability to facilitate business activities compatible to international regulatory environment.
• Ability to communicate effectively within the site organization and across the network.
• Good people management skills.
• Good risk management skills.
• Good Analytical thinking skills.
• Hands on experience in Working with Aseptic environments.
• Exposure in handling Quality Management Systems.
• Exposure in ensuring GLP compliance in QC Laboratory.

Responsibility

The senior accountant role need take full set account responsibility to match new company business development.

Account Receivable

· Able to handle AR function and everyday update the received payment.

· Coordinate with sales team to ensure timely collection of invoicing and sales collection.

· Process credit note and contra note.

· Every month end sends SOA to customers and sales team.

· Prepare debtor aging for monthly AR meeting.

· To prepare bank reconciliation to ensure all bank receipts are accounted for and properly posted in the Accounts Receivable ledger.

· Other ad-hoc duties as assigned.

Account Payable

· Perform daily AP function to ensure transactions are maintained in an effective, up to date and accurate manner.

· Process supplier’s invoices, credit note, payment voucher and contra note.

· Collection from all supplier’s Statement of Account (SOA) and checking the amount are same with our system.

· Respond to vendor enquiries regarding payment and make payments via fund transfer on time or when required upon all supporting documents are in place.

· Maintain proper filing and archiving of documents.

· Other ad-hoc duties as assigned.

Requirements

• Minimum relevant diploma qualifications
• At least 5-7 years’ experience in handling full set of accounts preferred
• Able to multi-task
• Work independently under pressure
• Singaporean, PR is welcome to apply
• Fluent in Chinese and English
• Proficient in excel and word skill
• Able to commence work immediate/short notice preferred
• Start work immediately preferred

Working Day

5.5 working days

8:00am to 5.00pm (Mondays to Fridays)

8.00am to 12.00pm (Saturdays)

Responsibilities

• Implement, maintain and improve company’s QMS effectively based on ISO 9001, ISO 22716, Good Manufacturing Practice (GMP), Good Distribution Practice (GDP) and relevant Halal guidelines effectively.
• Contribute for and coordinate change management, risk management, continuous improvement and quality objectives monitoring with relevant functions.
• Prepare for and coordinate Management Review meeting.
• Conduct quality induction/quality-related training sessions for team members and other relevant parties when required.
• Ensure and maintain proper quality system document control including procedure review and improvement based on document system.
• Organise and conduct quality internal and external audits based on audit schedule and required ISO 19011 guidelines.
• Reporting of audit results and the proposed changes to QMS-related procedures when necessary.
• Evaluate the impact of quality deviations on operations and the need for corrective and preventive actions (CAPA).
• Utilise customer feedback, conduct customer satisfaction monitoring and report customer satisfaction results based on customer satisfaction system.
• Coordinate with QC for the investigation of product feedbacks from different regions, analyse quality problems and recommend problem resolution.
• Work with relevant functions to provide evaluation for the selection and ongoing performance of external providers; monitor and ensure required improvement of external providers based on external provider quality management (EPQM).

Requirements

• Bachelor’s degree in Science or Engineering (preferably in Quality Management, Cosmetic Science, Chemistry, Pharmacy, or relevant engineering).
• Preferably 2 years of working experience in quality-related functions. Fresh graduates are welcome to apply too.
• Good knowledge of tools, concepts and methodologies of QA.
• Experience in quality auditing, implementation of CAPA and quality improvement projects preferred.
• Experience in a GMP environment or knowledge of GMP and/or ISO 9001 a plus.
• Certifications such as Quality Auditor/Quality Engineer will be an advantage.
• Stringent compliance to procedures, guidelines, standards and regulations.
• Strong computer skills including Microsoft Office, QA applications and databases.
• Self-starter, good at working well independently with initiatives.
• Meticulous and detail-oriented.
• Good analytical and problem-solving skills.
• Effective planning, coordination, interpersonal and negotiation skills.
• Time management skills (scheduling, prioritising) to meet deadlines.

PharmEng Technology has been providing quality services to leading manufacturers of healthcare and pharmaceutical products since 1997. Our specialists hold expertise in Commissioning & Qualification, Validation, Quality Systems, Regulatory Affairs, Engineering, and Training to ensure that our clients can keep on providing the world with their cost-effective and high-standard healthcare products. At PharmEng Technology, we strive to cultivate the best working environment where empowerment, passion and perseverance are nurtured while serving our clients to achieve their unique business goals. We are seeking an experienced Quality Control Microbiology with experience in pharmaceutical company/Life Science industries for a role in Singapore.

Key Responsibilities:

• Microbiological Testing
• Environmental Monitoring
• Method Validation and Qualification
• Documentation and Compliance
• Investigations and Deviations
• Equipment and Facility Management
• Training and Development
• Quality Assurance Support

Qualifications:

• Proficient in English.
• Bachelor’s or Master’s degree in Microbiology, Biotechnology, Pharmaceutical Sciences, or a related field.
• Minimum of 2-5 years of experience in pharmaceutical microbiology, preferably in a GMP-regulated environment.
• Technical Skills
• Analytical Skills
• Ability to work collaboratively in a cross-functional team environment, supporting quality control and production operations.

Why PharmEng Technology?

Our consultants come from different areas of the Pharmaceutical/Biotech/Medical Device industries and have extensive experiences obtained from world-class organizations in North America, Europe, and Asia. At PharmEng Technology, we value everyone’s unique talents and work together to support our clients. We offer continuous career growth, competitive wages, opportunities for travel and a team mentality that sets us apart from our competitors. It is the growth of our staff that continues to grow our company globally.

EEOC Statement

At PharmEng Technology, we don’t just accept difference — we celebrate it, we support it, and we thrive on it for the benefit of our employees, our clients, and our community. PharmEng Technology is proud to be an equal opportunity workplace.

JOB DESCRIPTION:

• Responsible for day-to-day business data management and regular business report preparations, which includes SAP material master maintenance, data integrity checking and statistics.
• Daily monitoring of basic system health and to flag out any inconsistency in API/System functions when found/reported.
• Daily monitoring of system backend jobs and ensure transactional data are interfacing in healthy state with external/internal system.
• To support Business Analytics, extracting and reorganizing original data, dealing with data related issues with other departments.
• Responsible for data preparation, data mining, to create/identify opportunities through analytics, to optimize business objectives.
• Communicate findings and insights to relevant stakeholders in order to assist Manager in making data-driven decisions in KPI assessments.
• Drive continuous improvements /optimization of campaign performance tracking report with business while complying to A*STAR policies.

REQUIREMENTS:

• Bachelor's Degree or Diploma (with at least 5 years or more relevant experience), preferably Business Analytics, Information systems or Computer Science.
• Strong analytical skills, with experience solving problems using data and providing practical business insights.
• Self-Starter with a strong sense of urgency.
• Aptitude to challenge the status quo, think outside the box, and question what has been done.
• Comfortable with dealing with sets of data points from different sources.
• Qualities of matured thinking, dependable and requires minimum supervision.
• Excellent communication skills (oral and written).

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

This position involves working on a project related to climbing robots and their application for port operations. The objective of this position includes developing a climbing robot control system and designing the corresponding hardware, to control a climbing robot can climb on the containers and function as a lashing bar. The role involves the opportunity to work with the research team within National University of Singapore in which the team leaders are from the Department of Mechanical Engineering, alongside Specialists from a high technology company. The successful candidate will be self-motivated with an outstanding track record in robotics, control, computer science, or related disciplines. The main research tasks for the project include but will not be limited to:

• Designing and developing electronics hardware for an articulated vertical climbing robot.

• Implementing the control system on hardware and conducting tests in real-world outdoor environments

Qualifications

• Good coding skills in C/C++

• Experience with hardware and electronics/circuit design

• Experience with embedded system (Arduino, STM32, etc.)

• Literature review/summarizing skills

• Good writing/spoken communication skills

Meranti Power Pte. Ltd., a fully owned subsidiary of Energy Market Authority, is establishing a maintenance team to maintain two open cycle gas turbines of our power generation station.

We are inviting applicants for the positions of Technical Officer (Control & Instrumentation) who shall report to the Senior Engineer / Engineer (Control & Instrumentation Maintenance) and be responsible for supporting him in the maintenance of C&I systems of the power station/plants. The Technical Officer shall support C&I team in the following:

Responsibilities:

• Responsible for proper maintenance of gas turbine, generator and auxiliary systems as assigned by Head or Engineers in-charge.
• Perform troubleshooting, predictive, preventive and corrective maintenance to ensure plant equipment and systems run smoothly and efficiently
• Identify, plan and initiate required actions to maintain the power plants for long term reliability and efficient generation output.
• Prepare technical specifications for equipment services, contract labour and ad-hoc maintenance services. Supervise and report performance of contractors to ensure good quality and progress of maintenance works, as well as full compliance with contract specifications.
• Liaise, supervise, and coordinate with contractors and vendors on projects, maintenance, repair, shut down, and overhaul works
• Support operation and maintenance engineers in investigation, analyse and determine the root cause of plant defects and outages.
• Maintain and control all records as required.
• Assist in the preparation, certification and review of all management systems, including ISO 9001, ISO 14001, ISO 18001, ISO 27001, ISO 50001 annually and provide support to the auditing parties wherever necessary, including internal & external auditors, to rectify non compliances and/or to follow up on improvement items identified during audit.
• Maintain and enhance the Control System Network and CyberSecurity of OT system.
• Support engineers in managing maintenance contracts and inspections, testing and commissioning of new equipment.
• Carry out routine and corrective maintenance programme of C&I in-charged equipment.
• Inspection and acceptance of purchased materials and contract spares.
• Reporting unsafe conditions/near miss incidents for rectification
• Monitor ad-hoc plant projects/tasks to ensure on time delivery
• Perform work orders allocated by Department Heads and/or Engineers

Requirements:

• Education in Electronics & Electrical Engineering or related discipline
• Minimum 2 years’ C&I maintenance experience in a power plant or related industry
• Willing to work overtime
• Self-driven with good working attitude and possess keen learning disposition
• Proven attendance record and works well in a team
• Work location is in Jurong Island (Transport to and from Jurong East MRT are provided)

Only shortlisted candidates will be notified.

By submitting your personal data and/or resume to Meranti Power Pte. Ltd. (“MP”), you shall be deemed to have given your consent to MP for collecting, using, and disclosing your personal data for the purpose of assessing your job application.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

The job holder is to work with PI and the research team to conduct research characterizing VOCs in urban environment.

Job Requirements

One or more of (but not limited to) the following:

• Well versed in operating PTR-TOFMS, maintenance, troubleshooting and data analyses
• Experience in handling big data via R, Python, Matlab, etc.
• Experience in laboratory (offline) VOC speciation and quantification
• Proactive in assisting and contributing to quality scientific research publications
• Proficient in technical presentation, slide making, report writing, etc.
• Proven rounded and effective team player with strong initiative and ownership of the research project

GetGo is Singapore’s largest and fastest-growing carsharing platform that enables everyone with the freedom to drive without the burden of ownership. Our vision is to be APAC’s #1 carsharing platform as we seek to create a mobility ecosystem that's shared and sustainable for all.

You will be part of the GetGo Fleet Quality Team to oversee and manage GetGo’s fleet, partner workshops, and insurance-related matters. You will collaborate closely with our affiliated workshops and insurance providers to oversee fleet quality and delivery schedules, ensuring the delivery of the highest fleet quality to our users. You will also support the Trust & Safety (User Trust) team with quotations on accidents and damages.

Day to Day Activities

• Assess damages on GetGo vehicles and work closely with internal teams for any subsequent actions to be taken
• Manage and follow-up with affiliated workshops to monitor and ensure smooth delivery of GetGo vehicles in a timely manner
• Collaborate with various teams including but not limited to our Fleet Operations, Trust & Safety and Finance teams for issues pertaining to Fleet Quality
• Liaise with insurers pertaining to insurance matters such as accident reporting, investigation, and repudiation issues
• Generate quotations for accidents and damages to our fleet based on photographs provided by customers and our internal teams

Who We Are Looking For

• Minimum two (2) years of experience in either workshop or motor insurance environment within the automotive industry
• Ability to assess and prepare estimated accident and damage repair quotations preferred
• Excellent communication and interpersonal skills
• Familiar and comfortable working with MS Excel/Google Sheets

Why You Should Join Us

• Be part of the fastest growing and largest carsharing technology company in Singapore
• Achieve meaningful objectives as part of a mission-driven and values-based organisation
• An opportunity to experience an open, inclusive, and culture-first work environment

Strong personal alignment with our GetGo Values:

• Driven by Purpose
• Stay Curious and Humble
• Collaborate with Empathy
• Make it Better
• Get It Going!

AEDAS is a leading global design practice dedicated to creative excellence and diversity in the built environment. We are a global platform for the most talented architects and designers, focused upon delivering locally-celebrated solutions for cities, communities and clients. Our global network of 12 offices forms a diverse staff base with skills across all sectors in architecture, interior design, building consultancy, master planning, landscape and urban design.

To support our continuous growth and expansion in Asia, AEDAS Singapore is seeking a committed candidate for the following position:

DOCUMENT CONTROL ASSISTANT / DOCUMENT CONTROLLER

Responsibilities:

· To take direction from Document Control Manager

· To be able to work as a proactive team member

· Management & filing of all Project documentation (Outgoing & Incoming)

· Preparation of Document Issue Packages to meet Project stage deliverables as defined by the Project Team Leader

· Checking that all documents meet defined AEDAS standards before being transmitted, and to highlight non-compliances to team members responsible. i.e. File name & drawing nomenclature compliance (Checked against any earlier revisions).

· Maintenance of Electronic PDF in project folders reflecting:

o AEDAS “Current“ Documents (Drawings, Specifications, Reports)

o “Current” Documents from all other Consultants

o “Current” Documents from Contractors as Submission Packages documents

· Downloading, Internal distribution and eventually filing of contractor submissions

· Uploading of commented documents via Workflow

· Assistance in preparation of and updating the distribution matrix as and when required, and advising all changes as appropriate

· Production of Reports to include but not limited to;

o Incoming & Outgoing reports on a weekly basis

o Tracking registers to record receipt & return of submittals

o To maintain & manage RFI tracking lists

o To highlight to team leaders any late items not yet responded

o Other reasonable tasks as required by Doc Control Manager & Team leaders

Requirements:

· Document Control Assistant - 1 year of working experiences in Electronic Document Management System (EDMS) environments, such as Aconex, Procore & BIM360 Documents

· Document Controller - 4 years of working experiences in Electronic Document Management System (EDMS) environments, such as Aconex, Procore & BIM360 Documents

· To fully engage with the usage of Electronic Document Management System (EDMS) and any other electronic document control systems pertinent to a project.

· Illustrate a positive, proactive attitude

· Logical approach to work with a consistent attention to detail

· A full understanding of AEDAS IMS and its supporting documents

· Ability to cope with conflicting demands, to be able to proactively highlight any conflicts of priorities and suggest action plans to resolve issues

Please submit a copy of your updated CV including your current salary, expected salary and notice period to [email protected].