Responsibilities

• Prepared checklists for different components of third rail based on manufacturers ITP to check manufacturers’ standards
• Liaise with LTA, SMRT and supplier to carry out material inspection
• Coordinate with material supplier and manufacturer before receiving materials for installation of third rail
• Check materials for any physical damage and ensure there is proper traceability to FATs (Factory Acceptance Test)
• Record all inspections and send reports to SMRT
• Prepare rejection report
• Ensure materials reach site for installation after QC inspection by managing material issuance procedure.
• Inspected concrete track bed casting and checked the quality of concrete
• Ensured all equipment and tools used are calibrated regularly
• Prepared concrete related reports for submission to LTA
• Inspected concrete sleepers laying and also checked if there is any hogging or sagging in the sleepers
• Trained supervisors to carry out NDT test on rail welds and closely monitor the test results

Requirements

• Min Degree in any Mechanical/Electronic/Mechatronics Engineering
• Good understanding in ISO standard for ISO 9000, 14000, and18000
• Railway project experience is a plus

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

1. Support the implementation of quality measures for nursing homes, which includes:Planning and organizing engagements with nursing homes to share the purpose and details of the quality measures.

• Presenting (using Tableau) and analysing the data for the quality measures.
• Preparing reports for CCOs and AIC management.
• Addressing questions from CCOs with regards to the quality measures.

2. Support the development of quality measures for other eldercare services, which includes:

• Reviewing local service/regulatory requirements, good practices, international practices to identify potential quality measures for home nursing care and other community-based care services.
• Conducting a preliminary analysis and presenting the findings.
• Liaising with other AIC Divisions to support the team’s quality measurement work.
• Organising meetings with the appointed workgroup, who will deliberate and select the quality measures for the sector.

3. Assist in the implementation of other key quality initiatives such as:

• Facilitating discussions with nursing homes to develop action plans with the aim of improving the safety culture in their organisations.
• Supporting the implementation of a quality assurance programme involving nursing homes and home nursing care providers.

Job Requirements:

• Degree in any discipline with 1 to 3 years of working experience. Entry-level candidates will also be considered
• Experience in data collection, analysis, visualisation and reporting; and knowledge of the community care sector would be an advantage
• Familiarity with analytics and statistical software e.g., Tableau, Stata would be an advantage
• Effective interpersonal, engagement and follow-up skills
• Strong written and verbal communication skills
• Passion for quality and ageing issues
• Resilient and results-oriented

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Fresh can also apply

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Position: Admin cum Account Assistant

(Singapore Citizen / Singapore Permanent Residence Only)

Salary: up to $2000 - $2600 depending on experience

Location: Tampines

Job Types: Full Time

Timing /Shifts: 5.5 Days Week
Working Hours: Monday to Friday 8.30am to 5.30pm

Saturday 8.30am to 12.30pm

Job Description:

· Perform general administrative duties, including managing phone calls, emails, follow up when necessary and correspondence.

· Maintain and update company records, databases, and filing systems.

· Prepare contracts for submission to clients.

· Assist in coordinating delivery schedule

· Perform ad hoc tasks and projects as assigned by management.

· Contacting customer for details of servicing or maintenance schedule and others.

· Issue invoices using Xero Software Systems.

Job Requirement:
-Fresh graduates are welcome.
-1 to 2 years of relevant experience will be beneficial.
-Willing to learn attitude, on job training will be provided.
-Strong communications and interpersonal skills with a demonstrated ability in handling situations.

-Bilingual in English and Mandarin Spoken.

The Job:

· Coordinate with external certification bodies/customers/internal departments to compile and submit documentation to meet certification requirements and obtain certification reports (such as Semi S2-S8 and NFPA79 standards)

· Coordinate with ISO certification bodies to implement, manage, review and maintain ISO systems

· Handle ISO internal/external audits, documentation and related activities to promote awareness and ensure company processes comply with ISO standards

· Prepare, compile and review technical documentation such as equipment manuals, specifications and procedures

· Do simple translation of technical documentation and data (Chinese and English)

· Research and review technical data to support both internal requirement and external requests from customers

· Maintain good control of documentation records and ensure timely update of changes

· Keep close track of project schedules to meet documentation submission deadlines

Requirements:

· Diploma/Degree in Engineering or related discipline

· Minimum 3 years of relevant experience, preferably in Semiconductor industry and familiar with the industry certification standards. More years would be consider for Senior role.

· Good knowledge of ISO standards and implementation procedures will be an advantage

· Proficient in both English and Chinese (to liaise with Chinese-speaking associates and to perform documents translation) will be an advantage

· Committed, responsible and possess self-drive

· Independent and resourceful

· Highly organized and careful with details

· Good interpersonal and communication skills

· Able to work under tight schedule to meet deadlines

. Able to work after office hours when required

Healthcare Quality & Regulatory Compliance Specialist (Hybrid) AMEA

Opportunity:

Play a critical role in driving compliance and quality programs for Healthcare Transportation and facilities and supporting the Healthcare Quality Management System to ensure processes and systems are compliant with regional and local regulations and customer requirements.

Your Contribution:

1. Quality Policies & Procedures: Determine, implement & promote policies and procedures for company Network and facilities (hubs & stations) to ensure compliance to standards such as GDP, GCP and others.

2. Quality Assessment & Standards: Write & review SOPs and Work Instructions for transportation & fulfilment solutions pertaining to the healthcare industry.

3. Compliance & Quality Program Management: Implement compliance and quality programs to support local Quality teams to ensure they are kept up-to-date and prepared.

4. CAPA Process Management: Lead in process creation and review of documentation on the implementation and responses to corrective and preventive actions (CAPAs) and monitor action progress until closure.

5. Healthcare Quality Management System: Develop, implement & support the system and processes, develop corresponding training programs, and acts as Super User for eQMS system.

6. Internal Audit Programs: Provide inputs to support the design & implementation of robust internal audit processes to ensure readiness of various functions & processes when meeting regulatory agencies & customer audits.

7. Certification Audits: Lead and support various certification audits with relevant regulatory agencies and certification providers across the region.

8. Operations & Customer Audit Programs: Lead regular audit programs / random checks to achieve successful audit outcomes and proper post audit follow up actions.

9. Healthcare Customer Liaison: Liaise with customers to understand quality requirements / issues / underlying concerns to advise on the way forward, provide advice based on interpretations as applicable to 3PL and support in issue resolution via conducting root cause analysis (depot).

10. Healthcare Quality Feedback: Liaise, consolidate feedback from different functions to update and prepare final copy for Quality Questionnaires, Agreements and RFQ Proposals for customers.

11. Validation Programs: Lead and support validation of transportation lanes and critical equipment like cold chain facilities, and packaging systems.

What we look for in you!

1. Hold local pharmacist license (and may be required to hold licenses and permits on behalf of the company)

2. Have three (3) to five (5) years of relevant experience in pharmaceutical or healthcare industry in a quality related role

3. Have competencies in quality assurance / regulatory affairs, customer relationship management and root cause analysis

4. Have working experience ensuring compliance in accordance to Goods Manufacturing Practise cGMP,)/, Good Clinical Practises cGCP, Goods Distribution Practice (GDP) & ISO13485 for Medical Devices, IATA CEIV and other local certifications in a warehouse and transportation business.

5. Experience in conducting external and internal audits

6. Must hold at least Bachelor’s degree in Pharmacy from a reputable local institute.

Your competencies:

1. Accuracy & attention to detail which is crucial to proper compliance to regulatory and standards

2. Problem-solving skills to support customer issue resolution

3. Planning & organization skills to ensure proper audit programs are managed effectively

4. Communication skills to facilitate engagements with customer and regulatory agencies

5. Project management capabilities and familiarity with Process Mapping, Six Sigma, Lean Methodology, Agile or Design Thinking

6. Apply data-driven decision making with the use of data analytics and visualization tools like Power BI and competency in Microsoft Office applications like Excel, Word, and PowerPoint

• Develop and engineer mechatronic systems for our Semiconductor equipment with main focus on Motion Control and Mechatronics.
• Perform tasks in close co-operation with other departments as mechanics, electronics, software in house and across development sites. Communicate across these single disciplines and sites.
• Provide technical support to production sites as well as to the field / customer sites.commission, qualify and document mechatronics systems and Motion Control solutions.
• Help to organize and install test equipment in the laboratory. Support other disciplines in performing testing tasks.
• Take part in conceptual and architectual design work together with development sites.

Education

• Bachelor/Master/PH.D degree in mechatronics, control engineering, electrical engineering or similar

Work experience

• More then 3 years work experience preferred, but not a absolute must
• Work experience with Semicon equipment or similar preferred

Expertise and methodology

Must

• Control theory
• Motion control
• Sensorics and motors
• Basic understanding to electronics
• Tools: Matlab

Nice to have

• Software development: basics in C++ (object oriented programming)
• Mechanics, Dynamics
• Vision competences

Best Regards

Navneet Goel

[email protected]

EA License No. : 02C3423 | Reg No. R1982194

• Prepare, setup and qualify machines before shipping out from factory to customer.
• Support site service as to when required.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Review management accounts and assist in planning of the audit engagements including, but not limited to, understanding of the client’s business environment, assessment of key risks areas, determination of materiality and performance of preliminary analytical review
• Perform fieldwork for audit including, but not limited to, performance of tests of controls, substantive analytical procedures and other tests of details
• Prepare tax computations for submission to IRAS
• Check compliance with relevant laws and regulations e.g. Singapore Companies Act (Chapter 50), Singapore Financial Reporting Standards (FRS), Income Tax Act and applicable tax legislation, etc.
• Review the financial statements prepared by clients and modify as appropriate in compliance with the requirements of FRS
• Lead team on engagements and provide guidance to junior associates

The candidate should :

• posses a Degree in accountancy or other professional accountancy qualifications
• possess initiative to work under pressure as part of a closely-knit team
• be a team player and enjoys interacting with entrepreneurs and fellow professionals
• be service-oriented with a positive “can-do” attitude and a strong sense of professional accountability
• be a keen learner and have a strong desire to continuously upgrade professional
• At least 2 years of auditing experience

Job Highlights

• Raffles Place and Telok Ayer MRT access
• Industry leading pay and benefits
• Singapore's best quality childcare centre

Job Description

Tots & Teddies is a multi-award winning Preschool. We aim to be Singapore's best quality childcare centre - a claim we don't take lightly! We have an unwavering commitment to quality that covers the details others don't.

Our daily menu is designed in collaboration with a paediatric nutritionist, and all food is prepared fresh daily in-house without compromise in quality.

We are seeking for a full-time Chef De Partie who has at least 2 years of experience in a similar capacity in the Early Childhood industry or different industry. This position will be reporting to the Sous Chef directly and have opportunities working directly with the Director.

Applicants should have a track record of good performance and should love being around children. Excellent hygiene and attention to detail is required for this role. You should also hold a valid Food Hygiene Certificate.

We offer excellent benefits commensurate with attracting high quality talent including:

• 21 days of annual leave
• Private health insurance
• Ongoing personal development funding
• No unnecessary bureaucracy or rules

This role offers great work life balance as weekends or night shift work is not required. In addition, you are not expected to work on a public holiday.

If you think you have what it takes to take our School's high food quality to the next level, drop us a note!

We look forward to meeting you soon :)

What to Expect:

● Create and maintain test cases, test plans ensuring that they are up to date with requirements and policy changes

● Create, maintain and improve the automated test framework and test environments

● Conduct testing on new features and file defects

● Perform various tests such as manual/functional/performance/exploratory tests support

● User Acceptance Tests (UATs)

● Assist in resolving production cases

● Participate in all agile ceremonies

How to Succeed:

● Degree in software engineering, computer engineering, electrical engineering or infocomm-related discipline

● At least 3 years of professional software quality testing experience with hands-on automation

● Strong understanding of testing techniques

● Strong understanding of test-driven development, continuous integration and continuous delivery

● Experience working with Java and Spring Boot frameworks will be an added advantage

● Experience with open source automated testing frameworks (i.e. Selenium, Cucumber, JUnit) or enterprise-level testing tools (e.g. HP Mobile Center, HP UFT, HP QC, Sprinter)

● Experience with open source performance testing tools (i.e. JMeter, Gatling, and Locust) or enterprise-level testing tools (HP LoadRunner)

● Experience with open source penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise-level penetration testing tools (HP WebInspect, Nessus, CheckMarx)

● Working experience in Agile environment will be an added advantage

● Excellent verbal communication and listening skills

● Proactive, self-driven and motivated

Responsibilities:

Reporting to QA/QC Manager

Implement and maintain the Quality Management Systems(ISO9001-2015, ISO14001-2015, AS9100, ISO45001(OSHA), Nadcap)

Manage the Internal and External Audits.

Review specifications and requirements,

Collaborate with Manufacturing Team to develop and implement controls and improvements.

Ensure that workflows, processes, and products comply with Quality and safety regulations.

Investigating and troubleshooting Quality or production issues.

Identify Root Causes of problems; implements and monitor effectiveness of corrective/Preventive measures.

Monitor and analyze quality performance(KPI) to identify trends in product quality or defects with the goal of mitigating and preventing recurrence and future defects.

Performs any other duty as assigned by the management.

Requirements:

Diploma in Quality or Mechanical engineering.

2+ years of experience in quality engineering, quality assurance, or a similar role.

Hands-on experience with Quality Management Systems (QMS), inspection and testing methodologies.

Experience in QA/QC function, ability to read Technical Drawing and use of measuring instrument

Strong communication and interpersonal skills.

Strong analytical and problem-solving skills.

Excellent verbal and written communication skills.

Excellent organizational skills and attention to details.

Extensive knowledge of or the ability to quickly learn the organizations production processes.

Excellent interpersonal skills with ability to serve as a liaison with customers, suppliers and internal team members.

Proficient with Microsoft Office Suite or related software.

Certified Auditor is an added advantage.

Purpose: To lead in the management of supplier’s quality performance and technical specification compliance to better meet the company’s business goal and requirements (Quality, Logistics, Technology, Cost, Service).

Key Area of Responsibilities:

• Review and approve First Article (FA) Report for product qualification
• Review and approve Supplier Change requests through the Supplier Change Request and Waiver Report submitted by the supplier to manage Change Control (Copy Exact requirement).
• Conduct part buy-off at the supplier site per customer/VDL requirements to ensure compliance before the part is delivered to VDL site.
• Review the Material Review Board (MRB) list to make a disposition on non-conforming parts and take follow-up action (for supplier-related issues).
• Review, approve, and validate actions in the Supplier Non-Conformance Report (NCR)/Corrective Action and Preventive Action (CAPA) Report to ensure the root cause is identified to actions done to eliminate the issue and prevent re-occurrence.
• Review, approve and validate actions in the Supplier 8D Report to identify the root cause and eliminate the issue to prevent re-occurrence.
• Conduct Quality Management System /Technical / Process Audit to qualify; periodic assessment to mitigate risk to Customer and VDL.
• Provide support on the Supplier Quarterly Business Review (QBR) process (Quality-related actions, indices, and feedback) to ensure alignment between critical suppliers and VDL to meet VDL requirements/targets.
• Engage in Continuous Improvement Projects (CIP) with suppliers to improve Quality and prevent Quality issues.
• Review overall supplier Quality status during Weekly Supplier Quality Department meetings to control supplier Quality and mitigate concerns.
• Present updates on Supplier performance to management and the customer focus team at the Customer Performance Forum.
• Provide support on New Product Introduction (NPI) meetings (Supplier Quality-related) to understand customer requirements and translate them to related suppliers.
• Support and participate in the company continuous improvement program.

Qualification & Experiences:

• Diploma in Mechanical Engineering/Mechatronics or other relevant qualification.
• Minimum 3 years of experience as a supplier quality engineer in the manufacturing industry.
• Certified Quality Engineer preferred
• Team player
• Good problem-solving skills
• Meticulous in details
• Proficient in advanced Microsoft Excel functions
• Good communication skills

Key Responsibilities:

• Track the quality of parts and products in the field
• Maintaining quality records
• Trending and highlighting quality of parts and products for corrective actions.
• Follow up on quality matters till final disposition.
• Conduct meeting with related departments and vendors
• Documentation of inspection processes
• Training and developing Technicians and Vendors
• Investigation of failures in the field and propose solution
• Comply with the EHS procedures
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Minimum Diploma / Degree in Mechanical, Manufacturing and Precision Engineering
• At least 5 years’ experience in Quality control and/or related work
• At least 2 years’ experience in ISO9001/ISO45001 related quality system and in use of the quality tools

The ideal candidate should have:

• Strong Interpersonal Skills
• Possess Ability to Communicate
• Must possess upmost integrity
• Must be meticulous and thorough
• Good quality mindset.
• Good analytical skill and possess initiatives.
• Singaporeans only

OUR COMPANY

We, at RegASK are a high growth global RegTech company leveraging technology and global network of experts to revolutionize regulatory intelligence, serving the LifeSciences (MedTech, CROs, Pharma) and FMCG industries (Food, Personal Care). RegASK team is highly diverse with more than 10 nationalities across 3 continents, we are entrepreneurial and very agile, enjoying the benefits of working across industries and across the globe. We are currently recruiting highly motivated talents to expand its team and support its ambitious growth plans.

RegASK is an international, diverse and rewarding place to work. If you are a builder, highly autonomous in your working style, and eager to problem solve, we would love to hear from you.

RegASK is part of Sprim Global Investments portfolio, a group of 500+ people in 19 offices across 6 continents, finding solutions, discovering and implementing new ideas to deliver better health.

THE POSITION

Title: Quality Assurance (QA) Analyst

As a Quality Assurance (QA) Analyst, you will play a crucial role in the software development life cycle by thoroughly testing and validating software applications to ensure they meet the highest quality standards. Your attention to detail, analytical mindset, and passion for delivering flawless software will contribute to the success of our projects.

Key Responsibilities:

Test Planning:

• Collaborate with cross-functional teams to understand project requirements and specifications.
• Develop comprehensive test plans and test cases based on project documentation.
• Develop and track test metrics

Manual Testing:

• Execute manual testing procedures to identify software defects and inconsistencies.
• Conduct functional, regression, and user acceptance testing.
• Defect Reporting:
• Document and prioritize identified defects, working closely with the development team to ensure timely resolution.
• Provide clear and detailed bug reports.

Test Documentation:

• Maintain accurate and up-to-date test documentation, including test cases, test scripts, and test results.
• Contribute to the creation and maintenance of testing standards and best practices.

Collaboration:

• Work closely with developers, product managers, and other stakeholders to ensure effective communication and understanding of project requirements.

Requirements:

• Bachelor's degree in Computer Science, Computer Engineering, Information Technology or any other relevant discipline
• 3 to 5 years of experience in manual software testing.
• Experience in Agile, software development life cycle (SDLC) and testing methodologies.
• Proficiency in creating detailed, comprehensive, and well-structured test plans and test cases.
• Excellent analytical and problem-solving skills.
• Strong communication skills with the ability to articulate testing processes and findings.
• SQL & data analytics skills are essential
• Able to write/execute queries for Mongo and MySQL Databases

How to Apply:

If you are excited about this opportunity and believe you have the skills and qualifications to excel as our QA Analyst, please submit your resume for consideration.

We appreciate all applications, but only selected candidates will be contacted for an interview.

Thank you for considering joining the RegASK team. We look forward to reviewing your application!

• Review management accounts and assist in planning of the audit engagements including, but not limited to, understanding of the client’s business environment, assessment of key risks areas, determination of materiality and performance of preliminary analytical review
• Perform fieldwork for audit including, but not limited to, performance of tests of controls, substantive analytical procedures and other tests of details
• Prepare tax computations for submission to IRAS
• Check compliance with relevant laws and regulations e.g. Singapore Companies Act (Chapter 50), Singapore Financial Reporting Standards (FRS), Income Tax Act and applicable tax legislation, etc.
• Review the financial statements prepared
• by clients and modify as appropriate in compliance with the requirements of FRS
• Lead team on engagements and provide guidance to junior associates

The candidate should :

• posses a Degree in accountancy or other professional accountancy qualifications
• possess initiative to work under pressure as part of a closely-knit team
• be a team player and enjoys interacting with entrepreneurs and fellow professionals
• be service-oriented with a positive “can-do” attitude and a strong sense of professional accountability
• be a keen learner and have a strong desire to continuously upgrade professional
• At least 2 years of auditing experience

Element has an opportunity for an experienced Quality Engineer. Reporting to the Principal Quality Manager, you are an essential member of the management team and responsible for the overall quality performance. This includes implementation, maintenance and improvement of Element quality management system (QMS). The successful candidate will have a sound working knowledge of ISO/IEC 17025, ISO/IEC 17020 or ISO/IEC 17065 requirements in relation to testing, calibration inspection and certification.

In this role, you will have interaction with clients, Accreditation Bodies and will be responsible for advising operational colleagues of the importance of quality, accuracy and integrity in the provision of the testing, calibration inspection and certification services we provide.You will be involved in leading quality at a local level and will work closely with the Principal Quality Manager to ensure that Element quality policies, processes and procedures are effectively implemented. As a quality leader within Element you will be capable of driving a culture of quality assurance and quality improvement, working closely with your operational colleagues and the wider Element quality community.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Ensuring all staff buy-in to the effective and efficient implementation of Element quality policies and procedure by providing advice, guidance and support on quality issues to Element Singapore and Malaysia business units.
• Driving quality improvements at every opportunity and proactive participation in continuous improvement and process improvement projects and ensure effective adoption of Element e-QMS throughout Element Singapore and Malaysia business units.
• Proactive participation in projects to deliver identified Quality objectives and contribute to and drive key initiatives to improve Quality awareness and compliance.
• Management of and participation in scheduled internal audits across management system and technical disciplines and proactively monitoring laboratory test equipment for calibration currency and advising management of upcoming schedules,ensuring corrective and preventive actions identified within specific laboratories are implemented and verified in a timely manner.
• Represent Element Singapore and Malaysia business units during assessments by accreditation bodies and audits by clients and controlled document holding and arrange to update appropriate documentation as necessary, control and issue of Element Singapore and Malaysia Quality Management Systems documentation and participate in the internal audit programme to monitor implementation of quality policies and procedures.
• Manage external and internal proficiency testing programs of all Element Singapore and Malaysia business units and prepare compliance and improvement metrics for Element Singapore and Malaysia business units quality as required.
• Writing and reviewing quality documentation as required and effective and efficient management of personal work schedules and timely generation of Element Singapore and Malaysia business units quality reports.

Job Requirements:

• Minimum Bachelor of Science or Engineering qualification.
• Proven experience (minimum two years) of managing quality management systems within a multi-discipline testing, inspection and certification environment, preferably multi-location.
• Demonstrable experience auditing against ISO/IEC 17025, ISO/IEC 17020 and ISO/IEC 17065.
• Sound knowledge of equipment calibration and analysing proficiency test data.
• Knowledgeable in uncertainty of measurement and risk assessment and hands-on experience with Element e-QMS preferable.

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

NO EXPERIENCE REQUIRED/ TRAINING WILL BE PROVIDED/ CAN WORK WITH FRIENDS

MUST-HAVE

1. Black Safety Shoes
2. Black Pants (Top wear will be provided)

Job Highlights

• Multiple Locations: North/West/Central/East
• Working Days: Mon to Fri
• Working Hours: 8.30am to 3.30pm/4.30pm (6-hours depolyment)

Job Scope

• Responsible to carry out daily pest control activities according to operational schedule
• Perform comprehensive checks at the assigned location
• Ensure proper measures are adhere
• Collect water samples for investigative needs
• Document and keep records of inspections and treatments

Job Requirements

• Able to commit at least 2-months
• No experience required as training will be provided
• Candidate who possess Driving License will be an added advantage

Position: Production Support (IHS Markit EDM solutions, Tectia scripting, Control-M)
Employment Type: 1-year Agency Contract (Highly Renewable)
Location: Alexandra

Key Skills:
- IHS Markit EDM solutions
- MS SQL Database knowledge
- Windows NT batch, Tectia SFTP scripts skills
- Asset Management Business functional knowledge

Job Objectives

• To provide proactive, timely, effective and efficient support to the business users
• To perform production support activities which involve assignment of issues and issue analysis and resolution within the specified SLAs
• To own issues and projects, and work with the various teams to develop solutions for the users
• To collaborate with business partners, third party vendors, and technology teams to facilitate the support process and work toward timely and effective issue resolution

Responsibilities:

• The Production Support person is responsible for managing the Enterprise Data Management application including web GUI, SQL database and Tectia SFTP batch scripts.
• Work in the Production support team; Provide front-line support for incoming issues to ensure timely and effective resolution of user issues, queries and projects
• Adopt standard Incident and Problem Management workflow and processes, i.e. timely ticket, defect and incident loggings, proper change management process, and quality issue/impact emails
• Actively manage all incidents and issues to proper closure – escalate issues as appropriate to necessary teams and management
• Analyse, document and track all actions taken throughout the lifecycle of the issue including decisions made, successful and unsuccessful actions taken, and final steps executed for resolution. Evaluate documented resolutions, analyse trends, and make recommendations to prevent future occurrences of similar issues
• Participate and collaborate with the development team in requirements gathering, clarification, and analyse impacts on issue or users requirements
• Assist the application development team as needed by validating fixes or enhancement to ensure problems have been adequately resolved
• Embrace standard Change Control Management practices, procedures and guidelines for application releases
• Engage vendor to provide solutions for the stability and sustainability of the production environment.
• Participate in annual DR/BCM activities or infrastructure related upgrade
• Utilize software updates, drivers, knowledge bases, and FAQ resources on the Internet/Intranet to aid in problem resolution

Job Requirements:

• Knowledge in HIS Markit EDM solution, MS SQL database, Windows/Tectia scripts, control-m job scheduling
• Min. Diploma in Computer Science / Engineering or related disciplines
• Min. 2 years of hands-on application management experience, preferably in the Asset Management business
• Strong skills in Windows batch, Tectia scripting, MS SQL Database, BMC Control-M Scheduler
• Good team player, Independent, proactive and self-starter with excellent interpersonal and communication skills

If keen, kindly forward your CV to [email protected]

Tangspac Consulting Pte Ltd
#03-02 The Octagon, 105 Cecil Street, Singapore 069534
EA Personnel Name: Olsem Stefanus Emmanuel
EA License: 07C3635 | EA Registration: R2094432

Responsibilities

• Ensure compliance and effectiveness of standards;
• Ensure verification of raw material and packaging material specification;
• Carry out analysis of products, testings and r&d;
• Maintains HACCP/ISO/FSC22000 system, document and process control;
• Liaising and facilitating auditing (Internal/External);
• Contribute to continuous improvement;
• Ensure quality by analyse yield report, develop quality assurance framework and manage non-compliance quality cases; and
• Any other ad-hoc duties/tasks as assigned by superior

Requirements:

• At least a Diploma in Food Science/food related/food process;
• Knowledge in HACCP, ISO, FSC2200 and Food Safety auditing is preferred;
• Good communication skills - both written and verbal;
• Good analytical skill and detail-oriented;
• Meticulous, organised and self-starter;
• Person of high integrity and good interpersonal skill;
• Able to work independently and as well as a team; and
• Bilingual. (To liaise clients with in other languages)

Working Hours: Mon-Fri, 8.00AM - 6.00PM.

Working Location: West, near SPH.

Transportation into company at: Lakeside MRT from Mon to Sat.

Lunch provided.

To apply, please kindly email your updated resume by clicking Apply Now or call us at 6265 9911 or whatapp us at 8853 8985 for more information.

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities/considerations.

- Permanent

- Ubi

- Mon – Fri; 8:30am – 5.30pm & 7pm-9pm (OT with pay), Saturday 8:30am to 12:30pm

- Up to $1600 + OT Pay

Job description:

• The Pest Control Technician executes technical processes involved in pest management independently and when required, manages a team of workers.
• He/She performs pest management work by applying appropriate pest management mitigation and prevention methods.
• He uses both chemical &/or non-chemical based methods as well as tools and equipment.
• He identifies issues on-site and recommends appropriate techniques to handle pests and infested areas.
• He also performs routine maintenance of tools & equipment and prepares chemicals to be used.
• He is expected to perform his work indoors and/or outdoors, and is required to comply with safety procedures and protocols.

Critical Work Functions

• Plan pest management operations
• Provide inputs for manpower and resource planning for pest management work.
• Perform site assessment to determine scope of work.
• Prepare pest inspection reports for planning pf pest management work to be carried out.
• Handle tools & equipment
• Adhere to applicable workplace safety & health (WSH) regulations and use of personal protective equipment (PPE).
• Follow & perform maintenance checklists for safety & functionality checks on tools & equipment.
• Carry out routine maintenance of tools and equipment.
• Operate equipment (fogger, sprayer, mister etc) for pest management work and perform trouble shooting when necessary.
• Repair tools & equipment and change spare parts.
• Execute pest management services
• Prepare and/or allocate work site areas for pest management work by segregation.
• Identify and analyse the types of pests to be handled.
• Prepare & allocate chemical &/or non-chemical pest management methods to eliminate pest infestation.
• Manage team and guide workers to perform pest management work.
• Resolve technical &/or manpower challenges that may impact pest management work om-site.
• Manage pest disposal and reinstate work site.
• Prepare work site reports to track work progress.
• Recommend preventive measures to clients on pest management.
• Handle incidents
• Respond to incidents and emergencies as directed.
• Report operational abnormalities to appropriate person eg. supervisor/Manager.

Period:

• Permanent

Working Hours:

• Mon – Fri; 8:30am – 5.30pm & 7pm-9pm (OT with pay), Saturday 8:30am to 12:30pm (paid training)

Salary:

• Up to $1600 + OT Pay

Working Location:

• Ubi Ave 4

Requirements:

• He should be physically fit, task-oriented and an able team leader to lead the workers
• on-site, resolves issues on-site and an effective communicator with customers.

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Registration no: R1332758)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Human Resource Centre Pte Ltd (EA License Number: 97C4832)

3 Shenton Way, #19-01 Shenton House, Singapore 068805

T: 6337 3183 | F: 6337 0329 | W: www.successhrc.com.sg

• Managing audit engagements which include initial engagement planning, analysis of controls and processes, preparation and review of audit documentations.

• Drafting of management letters and financial statements.

• Monitoring of engagement progress against budget and timeline set.

• Excellent communications skills, strong analytical and problem solving skills.

• Possess strong passion and desire to grow and improve technically and professionally.

• Committed with good positive working attitude.

• Able to perform under pressure in fast-paced working environment.

Our client is a global MNC, one of the most established pioneers in the Chemical industry. Due to business needs, they are now recruiting a Quality Assurance Engineer to be part of their QA/QC Team for ongoing transformation projects. They are located in the West - easily accessible.

Duties of Quality Assurance Engineer:

• Assisting in the research and development of Cement-based mortar formulations, including assessing alternative raw materials.
• Conducting tests on raw materials and finished products to ensure quality compliance.
• Validating product performance against industry standards and internal evaluation criteria.
• Ensuring products meet local regulatory standards.
• Providing manufacturing support, troubleshooting, and process improvement.
• Offering technical service, product trials, and training.
• Maintaining lab safety standards and workplace security.
• Any other adhoc duties as assigned

Requirements:

• Entry level are welcome to apply. Training provided.
• Experience with Dry Mixes is an added advantage

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

• Perform quality control checks of all products to ensure that they meet the requirements
• Maintain the quality standards
• At least 3 years of relevant working experience in the food industry
• possess basic Teppanyaki cooking skills
• A good team player
• Assist in leading quality and food safety related audits

- Temporary 3-4 months (renewable and convertible to perm)

- Mon – Fri; 8:30am – 4:30pm

- North west area – Sembawang, Woodlands

- $10-$12 per hour

Job description:

• The Pest Control Technician executes technical processes involved in pest management independently and when required, manages a team of workers.
• He/She performs pest management work by applying appropriate pest management mitigation and prevention methods.
• He uses both chemical &/or non-chemical based methods as well as tools and equipment.
• He identifies issues on-site and recommends appropriate techniques to handle pests and infested areas.
• He also performs routine maintenance of tools & equipment and prepares chemicals to be used.
• He is expected to perform his work indoors and/or outdoors, and is required to comply with safety procedures and protocols.

Critical Work Functions

• Plan pest management operations
• Provide inputs for manpower and resource planning for pest management work.
• Perform site assessment to determine scope of work.
• Prepare pest inspection reports for planning pf pest management work to be carried out.
• Handle tools & equipment
• Adhere to applicable workplace safety & health (WSH) regulations and use of personal protective equipment (PPE).
• Follow & perform maintenance checklists for safety & functionality checks on tools & equipment.
• Carry out routine maintenance of tools and equipment.
• Operate equipment (fogger, sprayer, mister etc) for pest management work and perform trouble shooting when necessary.
• Repair tools & equipment and change spare parts.
• Execute pest management services
• Prepare and/or allocate work site areas for pest management work by segregation.
• Identify and analyse the types of pests to be handled.
• Prepare & allocate chemical &/or non-chemical pest management methods to eliminate pest infestation.
• Manage team and guide workers to perform pest management work.
• Resolve technical &/or manpower challenges that may impact pest management work om-site.
• Manage pest disposal and reinstate work site.
• Prepare work site reports to track work progress.
• Recommend preventive measures to clients on pest management.
• Handle incidents
• Respond to incidents and emergencies as directed.
• Report operational abnormalities to appropriate person eg. supervisor/Manager.

Period:

• Temporary 3-4 months (renewable and convertible to perm)

Working Hours:

• Mon – Fri; 8:30am – 4:30pm

Salary:

• $10-$12 per hour

Working Location:

• North west area – Sembawang, Woodlands

Requirements:

• He should be physically fit, task-oriented and an able team leader to lead the workers
• on-site, resolves issues on-site and an effective communicator with customers.

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Registration no: R1332758)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Human Resource Centre Pte Ltd (EA License Number: 97C4832)

3 Shenton Way, #19-01 Shenton House, Singapore 068805

T: 6337 3183 | F: 6337 0329 | W: www.successhrc.com.sg