Job Description

You will be responsible for the successful installation and commissioning of the Control systems and UPS system design and built for the Water Reclamation plant based in Singapore. You will ensure that the work are completed as per contract specifications and in line with the relevant quality and safety guidelines. Working in Customer’s Site in Tuas, and reporting to the Project Manager / Integration Manager.

Responsibilities

• Taking the lead in coordinating with our appointed Contractor in ensuring that the necessary documentation; Project Schedule, Method Statement, Risk Assessment, Safe Work Procedure, tooling list, inspection checklist, or any other documentation as required for the project, are prepared and submission on time. They will need to be approved before commencement of work.
• Ensure that all design documentation is complete and provided to the contractor, prior to the start of the work to ensure a smooth installation and commissioning activities.
• To conduct pre-installation workshop with Client, facility owner and contractor to ensure clarity of work scope and resolve any conflicts identified.
• To conduct the Room “Hand over Take Over” procedure from the respective facility owner, prior to the start of work.
• Ensure compliance to the Project and Health and Safety requirements for all personnel working in this project, including employees and sub-contractors.
• Ensure all necessary Permit to Work are taken and approved prior to start of work
• Coordination with Client and Facility owners to ensure timely start of work and to resolve any site installation issues that may occur during the site work.
• Supervise and direct the contractors to ensure that all work are done as per design and in a safe manner.
• Proactively monitor and Control of the project installation and commissioning work as per plan and highlight any issues in advance and to lead in resolving them
• On-time submission of daily report, report of any issue identified during the site work and driving for a resolution plan, and any other reports/update as required by the PM / Integration Manager.
• Supporting of commissioning activities as required
• Ensure drawing markup to reflect as per actual installation vs design
• Ensure site installation and commissioning team adhere to project and safety requirements

Requirements

• Diploma/Bachelor degree in Engineering or similar field.
• Excellent written and verbal skill in English
• At least 5 years’ experience in site installation and Commissioning work, involving in Control Systems and Electrical System at a construction site
• Working in Confined Space certification, Work at Height certification and all Singapore Regulatory certification for working in construction site preferred
• Ability to recognize and proactively respond to dynamic site situation and liaise with the necessary parties to resolve.
• Ability to relate with different groups of people at various levels of the organization
• Pragmatic approach to scope of work and work environment
• Familiar with the local regulatory and project requirement for construction work in Singapore
• Strong commitment to safe work practices and dedication to following all relevant workplace safety guidelines.
• A collaborative approach to working, demonstrating strong communication and leadership skills.

Site office Location: TWRP C5A Site @ Tuas Nexus Drive

Transport : Pick-up point & Drop off at Tuas Crescent MRT station

Job Description

• Put up technical statements and requirements for all aspects of Instrumentation, Control, and Automation (ICA) Works, including network development and associated field engineering works.
• Execute procurement functions, including strategic sourcing and supply contracting works.
• Communicate and work very closely with the Procurement Manager and ICA Head for preparation of the invitation of the request for Proposal and administering of the purchase requisition and award consent.
• Maintain and update all procurement documentation and records.
• Support the Instrumentation, Control and Automation Head of Department in budget monitoring.

Job Requirements:

• Diploma or Degree in Electrical, Chemical, or Environmental Engineering.
• Minimum of 3 years of working experience. Applicants with more than 8 years of working experience will be considered as Senior Procurement Executive.
• Experience in Environmental Engineering, particularly in water, wastewater treatment, and Waste-to-Energy (WTE) industries, with a focus on SCADA and DCS is preferred.
• Good oral and written command in English.
• Proficiency in Microsoft Office Suite, including Word, Excel, and PowerPoint.
• Experience with auditing procedures and compliance standards.
• Commercially orientated with good negotiation skill.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Well Established Company
• Basic $4000 - $5200 + Variable Bonus + Allowances
• Excellent Welfare and Benefits + Career progression
• Working location: West / Northeast (Both location available)
• Working hours: 8:30am – 5:30pm (Mon – Fri)
• DCS | PLC | SCADA | Harmonas Programming
• Training Provided

Job Responsibilities:

• Plan, design, and configure control systems for a variety of applications, ensuring seamless integration with Building Automation Systems (BAS), Distributed Control Systems (DCS), SCADA, and Programmable Logic Controllers (PLC)
• Create detailed control schematics and field termination drawings, ensuring accurate design documentation for system installation
• Set up and configure system databases, prepare control descriptions for Testing and Commissioning (T&C), ensuring all configurations are optimized for performance.
• Lead Factory Acceptance Testing to verify system functionality, compliance with project requirements, and quality standards.
• Provide hands-on support during installation, commissioning, and start-up phases. Troubleshoot, repair, and calibrate systems on-site to ensure optimal performance.
• Conduct in-depth troubleshooting and fault diagnosis across systems such as DCS, PLC, BAS, and SCADA to resolve issues and maintain smooth operation.
• Perform system testing, calibration, and fine-tuning to ensure systems operate at peak performance and meet specified requirements.
• Work closely with project managers, designers, and engineers to ensure projects are executed smoothly and on time. Communicate technical requirements and solutions effectively to clients and stakeholders.

Qualifications & Experience:

• Bachelor’s Degree in Electrical Engineering, Control Systems, Automation, or a related field.
• Proven experience in system configuration, design, and commissioning of DCS, PLC, BAS, and SCADA systems.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

1. Perform daily periodic checks of Central Kitchen to ensure compliance to in-house GMP/GHP standards, SOP, Product Specifications, etc.

2. Conduct random checks on incoming raw materials, and perform product cutting on raw materials to ensure goods received are within in-house specifications.

3. Ensure Process Verification and Validation exercise are completed (i.e. SOP/CCP verification, new product launch process observation, monthly facility checks, monthly traceability exercise, finished goods shelf-life verification, etc.)

4. Conduct investigations on product/process non-conformance (on-line and customer complaints) and follow-up on proposed corrective/preventive measures to ensure effectiveness.

5. Promptly follow-up with contractors (chemical/pest control) during routine servicing to ensure work orders are conducted as per contract.

6. Participate and engage in quality system implementation (audit activities by regulatory/certification bodies and customers).

7. Conduct data/trend analysis on non-conformity of raw material/finished goods, pest reporting statistics, monthly production and facility check statistics, etc. for process and quality improvement.

8. Ensure analysis of food products via microbiological and physical testing, calibration of lab equipment and measurement tools, internal sensory evaluation are conducted as per schedule.

9. Report all non-conformances, discrepancies and/or deviations, and follow-up on the investigation of the non-conformity results.

10. Other projects as assigned.

Seeking a driven and fit personnel. The candidate will be reporting to the Manager and supervising all functions of pickup and delivery. Candidates are preferred to have a minimum of 1 year of working experience in the relevant field. All other candidates will also be considered if shown keen interest in logistics work.

Job Responsibilities:

• Oversee and monitor last mile deliveries.
• Serve as the primary point of contact for addressing customer inquiries and concerns.
• Manage the processing of delivery returns from drivers and customers.
• Ensure that key performance indicators are achieved set by supervisor or manager.
• Ensure adherence to safety protocols and standard operating procedures.

Job Requirements:

• Minimum of 1 year(s) of working experience in relevant field, candidate who shown keen interest in logistics work will also be considered.
• Must be physically fit.
• Strong time management skills.
• Meticulous and detail oriented.
• Ability to communicate with all partners via calls and emails.
• Ability to complete multitask within given timeline.
• Class 3 license will be an advantage.
• Singaporeans Only.

Remuneration:

• Basic Salary - $2100 (Probation) to $2300 (Confirmation)
• Performance Incentive: $300 monthly for good attendance & performance! (No lateness or absence)
• Tenure allowance - after 1st/2nd/3rd year anniversary of employment the employee is eligible for $150-$500/monthly tenure allowances
• Mobile Phone Allowance
• Meal Allowance for overtime more than 2 hours on top of normal working hours - $10
• Overtime pay eligible

Other information:

• 12 days annual leave
• 14 days sick leave/60 days hospitalization

Working Hours: 5.5 days/week

• Monday to Friday : 9am to 6pm
• Saturday : 9am to 1pm

Please submit your updated resume through the Apply Now link.

Define & deliver optimised Capital Procurement & Contract strategies for Capital Projects

Dealing with complex sourcing, logistics and quality issues in a complex, fast paced and challenging environment.

Ensure succesful project delivery (safety, cost, quality, time) against business case, customer requirements, compliance requirements and total cost of ownership.

Effectively manage stakeholder relationships with internal customers and external suppliers.

Business partner for regional site capex project managers.

Capex categories: Professional Services (Engineering Services, Project Controls & Project Management) and Trade Contractors.

Champion the project safety culture, behaviors, and engagement activities.

Act as project procurement partner for site Capital Projects.

Provide Work Package sourcing support for Category owners (as per Ariba Guided Buying).

Secure buy in and introduction of Procurement at the early project stage to define best contracting and procurement strategies considering project triggers, constraints and risks.

Accountability for defining and executing robust contracting and procurement strategies (e.g. EPCM, EPC, IPD).

Work Package sourcing in line with global category strategies.

Accountability for Procurement and Contracts performance during project execution (e.g. steering attendance, contract and performance management, change and claim management, contract close-out).

Sharing of supplier performance data with other Category Managers and being supported by the same.

6-10 years Capital Construction & Engineering experience mandatory.

6-10 years experience of procuring Professional Services (i.e., design, engineering, and project delivery consultants) and Trade packages within complex, multistage project delivery model (Front End & Execution) e.g., FEED + EPCm.

Advanced understanding of contractual risk allocation across delivery models (i.e, EPCM, EPC, IPD).

Advanced understanding of Categories present within capital projects: ie., Professional Services, Civil, Structural & Architectural, Electrical, Control & Instrumentation, Automation, Mechanical & Piping, Process equipment.

Experience of working with and drafting standard form contract agreements – FIDIC, NEC, IChemE.

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Responsibilities

You will assist in the tasks of the Quality Service and Finance units for the client, with a focus on both quality service and finance support, including:

Quality Service tasks:

1. Addressing clients' queries over the phone and via emails.

2. Attending to walk-in clients.

3. Providing administrative support to the QS team as needed.

4. Any other duties assigned by the QS Manager.

Finance tasks:

1. Handling procurement tasks and managing stock of pantry/stationery items.

2. Scanning, filing, and organizing documents.

3. Checking details in SCMS for investigations, processing refunds, and resolving discrepancies in backlog or current cases.

4. Assisting with the implementation of NETS at kiosks.

5. Sending email reminders to Hakams to submit claims.

6. Any other duties assigned by the Finance Officer/Manager.

Working Arrangement:

Working Hours:

Mon to Thurs – 8am to 5.30pm

Fri – 8am to 5pm

Sat-Sun and PHs - Not working

Duration: 6 Months

Location: Lengkok Bahru

Requirements:

1. Diploma in any discipline. Candidates without a diploma but with relevant work experience will also be considered. Fresh graduates are welcome to apply.

2. Proficient in Microsoft Office Suite (Word, Excel, PowerPoint) and the ability to work with multiple IT systems.

3. Good communication and writing skills

4. Organized with excellent time management skills and the ability to prioritize tasks effectively.

5. Ability to handle sensitive information with confidentiality.

6. Meticulous attention to detail, ensuring accuracy in document handling, procurement, and financial tasks.

7. Strong problem-solving skills and the ability to identify and resolve discrepancies in a timely manner.

8. A proactive, self-motivated individual who can work independently and collaboratively within a team.

9. Able to handle multiple tasks and work under pressure, while maintaining a high level of professionalism.

10. Passionate about serving the community and demonstrating empathy and respect when dealing with clients and colleagues.

EA License No.: 96C4864

Reg. No.: R22110485

Job Summary:

We are seeking an experienced Design Quality Engineer to lead quality initiatives for our thermal cooling solutions in the electronics and computing sectors. The ideal candidate will focus on ensuring design and process quality, driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and cross-functional collaboration, we encourage you to apply.

Key Responsibilities:

• Quality Monitoring & Yield Optimization: Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production.
• Abnormal Quality Management: Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement solutions and preventive actions.
• Process & Quality Control Enhancement: Strengthen internal quality control systems and enhance process capabilities. Lead initiatives aimed at maximizing operational efficiency.
• Customer Quality Assurance: Lead corrective actions for customer-reported quality issues and communicate preventive solutions to stakeholders.
• Inspection Process Optimization: Optimize the quality inspection process by integrating automation and cutting-edge technologies where applicable.
• Cross-Department Collaboration: Promote communication and collaboration between design, production, and other teams to ensure consistent adherence to quality standards.
• Team Leadership: Oversee the quality team’s task assignments, performance, and development, ensuring timely delivery of objectives.

Requirements:

• Bachelor's degree in the related field
• Proven experience in quality engineering, with a focus on manufacturing and design quality.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and industry standards.
• Six Sigma certification or similar is an advantage.
• Able to communicate with Chinese clients
• Willingness to travel and work abroad in China or Vietnam for at least 10 months annually.

HOW TO APPLY:

Interested applicants, please submit your updated resume in PDF/MS Word format to [email protected]

Please state your availability, current & expected salaries for processing purpose.

All applications will be treated in the strictest confidence.

We regret that only shortlisted candidates will be notified.

Tay Bi Hui Avery

Reg no: R23112677

EPS Consultants

95C5630

Job Summary:

We are looking for a highly skilled Senior Supplier Quality Engineer to lead quality initiatives across our supplier base for thermal cooling solutions in the electronics and computing industry. The ideal candidate will be responsible for ensuring supplier quality and process reliability, working closely with suppliers to meet product excellence standards.

Key Responsibilities:

• Supplier Quality Monitoring & Improvement: Develop and implement supplier quality monitoring systems to ensure materials and components meet required quality standards. Identify and resolve non-conformance issues with suppliers.
• Supplier Process Optimization: Partner with suppliers to enhance their processes, improving yield and ensuring consistent quality of materials and components.
• Abnormal Quality Issue Management: Lead efforts to address and resolve abnormal quality issues with suppliers, implementing corrective and preventive actions.
• Supplier Audits & Compliance: Conduct supplier audits to assess quality systems, process capabilities, and compliance with industry standards. Drive continuous improvement initiatives based on audit findings.
• Supplier Development: Collaborate with suppliers to enhance their quality processes, ensuring alignment with company standards and customer expectations.
• Cross-Functional Collaboration: Coordinate with design, production, and procurement teams to ensure effective communication and alignment on supplier quality expectations.
• Continuous Improvement: Foster a culture of continuous improvement by working closely with suppliers to enhance their quality management systems and manufacturing processes.

Requirements:

• Bachelor's degree in the related field
• Proven experience in supplier quality engineering, particularly in manufacturing or electronics environments.
• In-depth knowledge of supplier quality management systems and industry standards.
• Strong analytical, problem-solving, and negotiation skills.
• Familiarity with supplier audits, corrective actions, and continuous improvement practices.
• Six Sigma certification or similar is an advantage.
• Able to communicate with Chinese clients
• Willingness to travel extensively and work abroad in China or Vietnam for at least 10 months annually.

HOW TO APPLY:

Interested applicants, please submit your updated resume in PDF/MS Word format to [email protected]

Please state your availability, current & expected salaries for processing purpose.

All applications will be treated in the strictest confidence.

We regret that only shortlisted candidates will be notified.

Tay Bi Hui Avery

Reg no: R23112677

EPS Consultants

95C5630

Territory: To do technical service for Infineon's clients.

Job Description:

1. Equipment Maintenance:

• Perform regular maintenance and calibration of equipment to ensure optimal functionality, particularly for Infineon project requirements.
• Develop and implement preventive maintenance schedules to minimize downtime.

2. Mechanical Troubleshooting:

• Diagnose and resolve mechanical issues promptly to prevent production delays in the Infineon project.
• Use technical manuals, schematics, and diagnostic tools to identify problems.

3. On-Duty Business:

• Serve as the primary point of contact for Infineon customers regarding quality issues.
• Ensure timely and effective communication with Infineon customers to address their concerns.
• Document and report on quality incidents, providing detailed analysis and solutions.
• Willing work in night shift

4. PLC Skills:

• Utilize PLC (Programmable Logic Controller) skills to program, troubleshoot, and maintain automated systems specific to Infineon project requirements.
• Ensure that PLC systems are functioning correctly and efficiently.
• Provide training and support to team members on PLC operations and best practices.

Qualifications:

• Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related field.
• Proven experience in equipment maintenance and mechanical troubleshooting.
• Strong knowledge of PLC programming and troubleshooting.
• Excellent problem-solving and analytical skills.
• Effective communication and customer service skills.
• Ability to work independently and as part of a team.
• Willingness to travel to Infineon customer sites as needed.

Mon to Fri 8.30am - 5.30pm

Job Summary

Responsible for management of Asia Quality System, Policies, Programs and Initiatives. Part of the Global Quality Team to maintain global quality system and drive global initiative.

Role and Responsibilities

Quality Systems

1. Supports overall maintenance of quality systems

2. Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team

3. Maintains the Master control and ISO document control system

4. Maintains customer related documents such as Quality Agreement, PPAP

5. Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

6. Ensures effective implementation of all company quality policies

7. Implements ISO and other recognized standards

8. Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.

9. Sets, communicates, and implements quality objectives in line with business goals

10. Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.

11. Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.

12. Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

13. Leads ISO quality standards implementation as Management Representative.

14. Conducts and leads quality audits to specific quality standards.

15. Leads customer related audits

16. Conducts supplier audits

17. Conducts internal audit investigations for product quality and process issues

18. Responsible for ensuring timely resolution to audit findings

Training

19. Provides training for all employees on basic quality and statistical concepts

20. Provides training to appropriate personnel for updates and changes to quality policy

21. Attends relevant external training sessions/courses and shares learning internally

Job Requirements:

• Degree or equivalent experience in a field of study such as chemistry, business, accounting, engineering, etc.

• Certificate in Quality Engineering is preferred.

• Position requires 3-6 years of quality management experience.

• Good experience into customer & supplier audit and able to conduct training

• ISO 13845 experience will be added advantage.

• Demonstrates introductory understanding and ability and with guidance, applies competency in typical situations.

• Able to design quality systems to meet customer expectations and internal needs. New approaches and continuous improvement must be ongoing

• Good interpersonal skills to be able to communicate and collaborate with all stakeholders and deal with situation proactively

• Junior with 1-2 experience in related field can also apply

• Occasionally overseas travel and weekly conference call is required for the role

• This position required to communicate closely with vendors in China.

Job Summary:

We are seeking an experienced Design Quality Engineer to lead quality initiatives for our thermal cooling solutions in the electronics and computing sectors. The ideal candidate will focus on ensuring design and process quality, driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and cross-functional collaboration, we encourage you to apply.

Key Responsibilities:

• Quality Monitoring & Yield Optimization: Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production.
• Abnormal Quality Management: Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement solutions and preventive actions.
• Process & Quality Control Enhancement: Strengthen internal quality control systems and enhance process capabilities. Lead initiatives aimed at maximizing operational efficiency.
• Customer Quality Assurance: Lead corrective actions for customer-reported quality issues and communicate preventive solutions to stakeholders.
• Inspection Process Optimization: Optimize the quality inspection process by integrating automation and cutting-edge technologies where applicable.
• Cross-Department Collaboration: Promote communication and collaboration between design, production, and other teams to ensure consistent adherence to quality standards.
• Team Leadership: Oversee the quality team’s task assignments, performance, and development, ensuring timely delivery of objectives.

Requirements:

• Bachelor's degree in the related field
• Proven experience in quality engineering, with a focus on manufacturing and design quality.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and industry standards.
• Six Sigma certification or similar is an advantage.
• Able to communicate with Chinese clients
• Willingness to travel and work abroad in China or Vietnam for at least 10 months annually.

HOW TO APPLY:

Interested applicants, please submit your updated resume in PDF/MS Word format to [email protected]

Please state your availability, current & expected salaries for processing purpose.

All applications will be treated in the strictest confidence.

We regret that only shortlisted candidates will be notified.

Tay Bi Hui Avery

Reg no: R23112677

EPS Consultants

95C5630

Job Description & Requirements

Responsibilities:

· Understanding process requirements from Technical Spec & P&ID.

· Interaction with customer for getting inputs for designing and Development of Control System.

· Preparing the flow chart, FDS / FCD, system configuration, P&ID for Instrumentation and verifying the electrical drawing.

· Developing the PLC programming, HMI / SCADA Designing as off-site development and onsite commissioning.

· Field wiring and commissioning the instrumentation such as transmitters, switches, valves and motors.

· Conducting Factory Acceptance Test (FAT), Site Acceptance Test (SAT) and related document preparation.

· Commissioning & troubleshooting for new & existing systems & Interaction with customer for Commissioning execution.

· Involve in the installation of new Equipment’s during plant expansion.

· Carry out Equipment improvements projects and modifications.

· Manage Projects including Testing and commissioning, on site installation, repair, maintenance and test tasks.

· PLC Programming of Life Safety Systems configurations.

· Diagnose errors or technical problems and determine proper solutions.

· Produce timely and detailed reports.

· Installing small additions and changes to existing systems.

· Follow all company’s filed procedures and protocols.

Requirements:

· At least 5 years of hands-on experience in PLC & SCADA developments and Maintenance

· Hands-on experience in Siemens S7-400 CPU, Mitsubishi, Proface, Panasonic, Allen Bradley PLC’s and redundant system configuration

· Hands on experience in Wonderware ArchestrA SCADA system, WINCC and TIA Portal

· Familiar with Automation and Control engineering

· Proficiency in Profibus communication and troubleshooting

· Bachelor’s Degree in Electrical / Electronic Engineering or above

· Knowledge of MS Office

· Basic knowledge in Mechanics, Pneumatics and Hydraulics.

· Strong personality with a hands-on attitude.

· Ability to work rotating shift and perform overtime on weekdays & weekends.

· On call support during and after office hours.

Responsibilities:

• Performs all SQS work assignments in accordance with the standard work procedures, practices and specifications
• Review of Vendor Documents for Compliance to project requirements/ spectification and international standards
• Implements and adminsters the Quality Assurance Plan manifested by QA Supervisor for field and participates on a day to day basis in quality assurance activities.
• Review and approval of quality related specification, painting procedures, SAT and FAT procedures, NDT procedures, EIT related documents, pre com and commissioning documents
• Prepares and issue QAQC reports
• Organizes and perform audits and surveillance at a supplier's (or their sub suppliers) facility to verify compliance with qualification requirements
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor's Degree in Naval Architecture / Marine and Offshore / Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment
• Well conversant with codes & standards like ASME, API, ANSI, AWS, IACS, ABS, NR etc

Our Addresses and Working Hours:

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Fri: 8am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Support day-to-day training administration for the Company. Interacts with all levels of staff in the Company with regards to in-house training, external training, on-the-job training and education.

Training Needs Analysis and Training Plan

• Compile the Training Needs for the year
• Analyze the training needs of staff and develop a total training plan yearly
• Educate or provide awareness training on Training Needs Analysis as required

Training Management and Communication

• Upkeep of all staff training records
• Conduct/Coordinate on training such as ISO9000, AS9100, ISO14000, OHSAS18001, Technical training, Soft Skills & etc.
• Assist in program design and development for in-house training
• Source, evaluate and engage external consultants for selected training programs
• Create training awareness & schedule through internal promotion, intranet & etc.
• Liaise with government institution for training grants or subsidies
• Review and recommend policies and procedures to increase the effectiveness and efficiency of the people development functions
• Control and monitor the total training budget for the company
• Set up an information system for the people development function to provide pertinent feedback to management

Training Evaluation

• Compile all training evaluation results after each training
• Provide monthly reports on training results, expenditure & etc.
• Develop and evaluate all four levels of training and ensure prompt feedback of information
• Provide half-yearly training report on the Total Training Plan and its effectiveness
• Comply with the ISO9001, AS9100, ISO4001 & OHSAS18001 Management system

Other Tasks

• Familiar with Quality Control Circle criteria and able to conduct and facilitate the teams.
• In charge of Staff Suggestion Scheme and ensure all employees to participate during Quality month
• Involve in GHG reduction activities
• Submit OHS & HSE data to HQ quarterly
• Other tasks assigned by superior.
• Ensure implementation of people development policies and procedures
• Timely compilation of Training Needs Analysis of the company yearly
• Implementation of training identified in the Total Training Plan
• The Company Education budget is appropriately used

Requirements:

• Degree in Business Administration with 2 years related experiences or Diploma in Training & Development with 4 –5 years training experience
• Possess good interpersonal skills
• Good oral & written communication skills
• Able to work as a team player
• Knowledge in People Developer Standard & it’s requirements
• Computer literate & proficient in MS Office
• Good understanding of Training Fund on all government statutory board requirements
• Stand up training experience is essential.

5 days work week

Bedok Area

Manufacturing Co.

Interested candidates, please forward a detailed resume and email to [email protected]

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for at least 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

We are hiring Contract Quality Engineer to be outsourced to our clients from reputable healthcare organizations.

Apply now!

Job Scope

• Support Validation Projects: Assist with qualification and validation activities, ensuring compliance with company procedures and regulations.
• Review and Approve Documents: Review and approve validation documents like protocols, reports, and procedures.
• Manage Discrepancies: Identify and address issues in validation protocols, ensuring corrective actions are documented.
• Act as Quality Representative: Participate in cross-functional projects as the Quality Systems and Validation representative.
• Provide Validation Expertise: Offer guidance on creating or updating validation documents, such as for analytical instruments and methods.
• Ensure Document Readiness: Ensure all qualification/validation documents are clear and inspection-ready.
• Support Ongoing Validation: Oversee the Master Validation Plan and support routine qualification activities.
• Collaborate Across Sites: Help standardize validation processes across multiple sites.
• Train and Coach: Develop training materials and provide support to team members and other departments.

Job Requirements

• Bachelor’s degree in Pharmaceutical Sciences, Life Sciences, Biology, Biotechnology, Chemistry, Chemical Engineering, Engineering, or related field.
• At least 2-3 years of experience in quality assurance, manufacturing operations, or validation in the pharmaceutical or biotechnology industry. Experience in equipment, process, cleaning, and computer systems validation is preferred.
• Strong understanding of FDA/EU cGMP requirements, including CFR 21 Part 11, and familiarity with PDA and ISPE GAMP guidelines.

All Interested candidates are invited to email your resume in MS Word format to:

[email protected]

Please include your full working experience, education background, notice period, expected salary.

Sheryl Tan
Outsourcing Team
Recruit Express Pte Ltd
Company Reg. No. 199601303W | EA License Number: 99C4599

We regret to inform that only suitable candidates will be shortlisted for an interview.

Our client is a leading logistics company. They are looking for a Senior Quality Executive to assist their Quality team for the next phrase of their business. They are located at West of Singapore– easily accessible. The Senior Quality Executive is responsible for:

Duties

• Establish, update, and uphold the Quality and Environmental Management System (QEMS) in alignment with ISO 9001:2015, collaborating with stakeholders to create and revise relevant procedures.
• Track quality trends and performance metrics, ensuring continuous improvement within the organization.
• Manage internal and external ISO 9001:2015 certification processes, audits, and compliance to meet all required standards and objectives.
• Communicate quality assurance strategies and processes across the organization through quality programs, training, and awareness initiatives.
• Lead monthly quality review meetings, generate performance reports, and conduct site inspections to ensure compliance with quality standards.
• Participate in customer audits, lead investigations into quality issues, manage supplier onboarding, and address improvement areas based on non-conformities.

Requirements

• Min Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• Min 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

We are hiring Quality Engineer to be outsourced to our clients from reputable healthcare organizations.

Apply now!

Job Scope

• Support Validation Projects: Assist with qualification and validation activities, ensuring compliance with company procedures and regulations.
• Review and Approve Documents: Review and approve validation documents like protocols, reports, and procedures.
• Manage Discrepancies: Identify and address issues in validation protocols, ensuring corrective actions are documented.
• Act as Quality Representative: Participate in cross-functional projects as the Quality Systems and Validation representative.
• Provide Validation Expertise: Offer guidance on creating or updating validation documents, such as for analytical instruments and methods.
• Ensure Document Readiness: Ensure all qualification/validation documents are clear and inspection-ready.
• Support Ongoing Validation: Oversee the Master Validation Plan and support routine qualification activities.
• Collaborate Across Sites: Help standardize validation processes across multiple sites.
• Train and Coach: Develop training materials and provide support to team members and other departments.

Job Requirements

• Bachelor’s degree in Pharmaceutical Sciences, Life Sciences, Biology, Biotechnology, Chemistry, Chemical Engineering, Engineering, or related field.
• At least 2-3 years of experience in quality assurance, manufacturing operations, or validation in the pharmaceutical or biotechnology industry. Experience in equipment, process, cleaning, and computer systems validation is preferred.
• Strong understanding of FDA/EU cGMP requirements, including CFR 21 Part 11, and familiarity with PDA and ISPE GAMP guidelines.

All Interested candidates are invited to email your resume in MS Word format to:

[email protected]

Please include your full working experience, education background, notice period, expected salary.

Sheryl Tan
Outsourcing Team
Recruit Express Pte Ltd
Company Reg. No. 199601303W | EA License Number: 99C4599

We regret to inform that only suitable candidates will be shortlisted for an interview.

Overview

The Job Holder will support in building improvement capabilities and culture in the NUHS Regional Health System Office (RHSO), including community partners such as GPs. The Job Holder will be involved in co-developing and conducting quality improvement training for RHSO staff and community partners, as well as facilitate and coach small to large scale improvement projects through the use of appropriate tools/methodologies.

Job Responsibilities

1. Deliver QI Training

• Develop training materials and resources (e.g. training guides and e-learning videos) on quality improvement
• Conduct and facilitate quality improvement training sessions/workshops for RHSO staff and partners
• Gather feedback on training sessions and use of appropriate improvement methodologies/tools
• Deliver training on lean management and human-centred tools to impart knowledge and skills to hospital staff.

1. Facilitation of improvement projects

• Facilitate and coach department/division and organisation-wide level improvement projects to improving quality and processes through the use of appropriate tools/methodologies
• Monitor the progress of improvement activities and guide teams to take appropriate actions
• Assist in interpreting data to measure the effectiveness of the improvement activities

1. Strategy & Culture Building

• Assist in development and implementation of Improvement framework and strategies
• Support initiatives or events that promote improvement and Innovation culture in RHSO
• Lead engagement with HODs to influence and identify areas of improvement in quality and safety

1. Any other tasks as assigned

Requirements

Qualification Required and Area of Discipline

Good degree in any discipline, preferably in Life Sciences, Business Administration, Industrial Design

Prior healthcare sector experience is preferred

Required Competencies and Capabilities (Skills, Experiences and Professional Licences)

• Proficient in quality improvement methodologies such as Lean, process/value-stream mapping, design thinking
• At least 1-2 years of experience in facilitating workshops and conducting trainings
• Confident in coaching and guiding fellow colleagues in Quality Improvement tools
• Certified Six Sigma Green/Black Belt will be an added advantage
• Able to engage stakeholders and work through doctors, nurses, allied health professionals, operations and administrative staff
• Able to work independently and as a team
• Ability to perform even under tight timelines
• Good analytical and organization skills
• Good writing and verbal communication skills
• Open to learning and trying new things. Able to grasp concepts easily and be able to think on the feet.
• Highly self-driven and self-motivated, positive attitude and perseverance to overcome obstacles

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking an experienced Senior Supplier Quality Engineer (SQE) to lead quality and process optimization efforts across our supplier network, with a strong focus on mechanical processes (e.g., metal stamping, forging, brazing, die casting, CNC machining, and milling). The successful candidate will work within the electronics and computing sectors, particularly focusing on thermal cooling solutions, ensuring that our suppliers meet rigorous quality standards and process reliability. You will collaborate closely with suppliers to enhance product quality, optimize processes, and drive continuous improvement.

Key Responsibilities:

• Develop and implement systems to monitor and assess supplier quality. Ensure that materials and components, particularly those related to mechanical processes (e.g., metalworking, tooling, fixture and jig design), comply with specified standards. Address and resolve any non-conformance issues.
• Work closely with suppliers to optimize their manufacturing processes, such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive improvements in process yield and consistency to ensure the high quality of materials and components.
• Lead the resolution of abnormal quality issues in collaboration with suppliers, focusing on root cause analysis and the implementation of corrective and preventive actions.
• Perform detailed audits to evaluate suppliers' quality management systems and process capabilities, particularly in mechanical and metalworking processes. Ensure adherence to relevant industry standards, and drive improvement actions based on audit findings.
• Work in partnership with suppliers to develop and enhance their quality processes and manufacturing practices. Ensure that their systems align with company standards, especially in the areas of tooling design and fixture/jig manufacturing.
• Collaborate with internal teams (design, production, procurement) to ensure clear communication of quality expectations and standards.
• Promote a culture of continuous improvement within the supplier network, focusing on enhancing quality management systems and manufacturing practices for metal-based components and mechanical parts.

Requirements:

• Bachelor’s degree in Engineering, Quality Assurance, or a related field.
• Minimum 5-7 years of relevant experience in supplier quality engineering or a similar role within the manufacturing or electronics industry.
• Proven experience with mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling.
• Strong understanding of supplier quality management systems and industry standards.
• In-depth knowledge of metalworking, tooling design, and the manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and negotiation skills.
• Experience with supplier audits, corrective actions, and continuous improvement processes.
• Six Sigma certification (or similar qualifications) is advantageous.
• Willingness to travel and based in China and Vietnam at least 10 months per year. (includes four round-trip tickets to Singapore annually, with separate living arrangements provided)

Our client is a leading logistics company. They are looking for a Senior Quality Executive to assist their Quality team for the next phrase of their business. They are located at West of Singapore– easily accessible. The Senior Quality Executive is responsible for:

Duties

• Establish, update, and uphold the Quality and Environmental Management System (QEMS) in alignment with ISO 9001:2015, collaborating with stakeholders to create and revise relevant procedures.
• Track quality trends and performance metrics, ensuring continuous improvement within the organization.
• Manage internal and external ISO 9001:2015 certification processes, audits, and compliance to meet all required standards and objectives.
• Communicate quality assurance strategies and processes across the organization through quality programs, training, and awareness initiatives.
• Lead monthly quality review meetings, generate performance reports, and conduct site inspections to ensure compliance with quality standards.
• Participate in customer audits, lead investigations into quality issues, manage supplier onboarding, and address improvement areas based on non-conformities.

Requirements

• Min Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• Min 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking an experienced Senior Supplier Quality Engineer (SQE) to lead quality and process optimization efforts across our supplier network, with a strong focus on mechanical processes (e.g., metal stamping, forging, brazing, die casting, CNC machining, and milling). The successful candidate will work within the electronics and computing sectors, particularly focusing on thermal cooling solutions, ensuring that our suppliers meet rigorous quality standards and process reliability. You will collaborate closely with suppliers to enhance product quality, optimize processes, and drive continuous improvement.

Key Responsibilities:

• Develop and implement systems to monitor and assess supplier quality. Ensure that materials and components, particularly those related to mechanical processes (e.g., metalworking, tooling, fixture and jig design), comply with specified standards. Address and resolve any non-conformance issues.
• Work closely with suppliers to optimize their manufacturing processes, such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive improvements in process yield and consistency to ensure the high quality of materials and components.
• Lead the resolution of abnormal quality issues in collaboration with suppliers, focusing on root cause analysis and the implementation of corrective and preventive actions.
• Perform detailed audits to evaluate suppliers' quality management systems and process capabilities, particularly in mechanical and metalworking processes. Ensure adherence to relevant industry standards, and drive improvement actions based on audit findings.
• Work in partnership with suppliers to develop and enhance their quality processes and manufacturing practices. Ensure that their systems align with company standards, especially in the areas of tooling design and fixture/jig manufacturing.
• Collaborate with internal teams (design, production, procurement) to ensure clear communication of quality expectations and standards.
• Promote a culture of continuous improvement within the supplier network, focusing on enhancing quality management systems and manufacturing practices for metal-based components and mechanical parts.

Requirements:

• Bachelor’s degree in Engineering, Quality Assurance, or a related field.
• Minimum 5-7 years of relevant experience in supplier quality engineering or a similar role within the manufacturing or electronics industry.
• Proven experience with mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling.
• Strong understanding of supplier quality management systems and industry standards.
• In-depth knowledge of metalworking, tooling design, and the manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and negotiation skills.
• Experience with supplier audits, corrective actions, and continuous improvement processes.
• Six Sigma certification (or similar qualifications) is advantageous.
• Willingness to travel and based in China and Vietnam at least 10 months per year. (separate living arrangements provided, includes four round-trip tickets to Singapore annually)