Responsibilities:

· Develop systems design, programming and selection of equipment instrumentation and controls.

• Prepare and review I&C specifications, requirement, drawings, e.g. instrument lists and datasheets/specifications, ICA panels, control valve, process functional description and SLD

· Responsible for Single Line Drawing, Control Schematic drawings, and programming of SCADA/HMI necessary modification of existing programme.

• Participate in the development of P&ID's, package specifications, logic diagrams, cause & effects, control narratives
• Prepare RFQs, technical bid summaries and make purchase recommendations
• Lead and Interface with suppliers, clients, and other engineers on ICA

· Execution of projects.

· Startup, testing, commissioning and troubleshooting of plants

· Preparation and support tender team for tender and proposal activities.

Requirements:

• Degree in Electrical & Electronics / Instrumentation / Automation Engineering.
• Minimum 15 years relevant working experience, preferably with experiences in Instrumentation and Control.
• Knowledge in Instrumentation and Control.
• Knowledge in high end fieldbus communication (eg. profibus, modbus and other high end communication protocol).
• Able to read & understand single line diagram and generate Bill of Materials from single line diagram.
• Knowledge on control, schematics, motor controls and materials take-off.
• Knowledge in Mitsubishi / Siemens / Schneider / Omron PLC software would be an added advantage.
• Those with relevant project management, process design, and service & maintenance experience will be an added advantage.
• Possess good communication and interpersonal skill.
• Highly motivated, driven by excellence and having an eye for details.
• Able to take on numerous challenging tasks while simultaneously meeting high standards and deadlines/vision.

An attractive remuneration package, benefits, challenging work environment and excellent career growth in the company would be offered to the successful candidate.

Additional Information

Job Responsibilities:

• Ensure all laboratory tests are well managed and performed including testing on raw materials, intermediates and finished products
• Ensure all laboratory instruments and equipment are maintained and calibrated
• Manage the inventory of quality reference materials such as QC reagents and lab consumables
• Prepare daily QC report, relevant work instructions and validation protocol or reports
• Ensure documents and quality records are maintained for easy retrieval
• Manage operations towards timely support to meet factory analytical request
• Develop training to build quality and safety awareness
• To maintain cleanliness of laboratory and glassware
• Handle administration work of factory when required

Job Requirements:

• Min Nitec / Diploma in Chemical Process Technology or its equivalent
• Entry level (preferably 2 years experience in handling wet chemistry and laboratory management)
• Preferably with knowledge / skills on ISO900, ISO 13485 and ISO14001 Quality Management knowledge and current Good clinical/ laboratory/ manufacturing/ pharmaceutical practices (cGXP)
• Strong troubleshooting skills with various analytical instruments
• Good verbal and written communication and interpersonal skills
• Positive working attitude with sense of urgency
• Able to work independently as well as an effective team player
• Self-driven and motivated to improve processes
• Working hours: 8.00am - 4.45pm
• Work location : 19 Jalan Tukang

Job Description & Requirements

• Monitoring and verifying that the Environmental Management Plan (EMP) is adhered to at all times and taking action if the specifications are not followed.
• Monitoring and verifying that environmental impacts are kept to a minimum during the planning and design and construction phases of the project.
• Assisting the project proponent in ensuring that all environmental authorisations have been obtained.
• Reviewing and approving environmental objectives and targets and assisting the Contractor in finding environmentally responsible solutions to problems.
• Conducting, surveillance, monthly inspections and detailed audits.
• Compiling and completing checklists in order to aid the surveillance and inspection requirements.
• Keeping records of all activities/incidents concerning the environment on site and issuing of spot fines for transgression of activities identified in the EMP.
• Recommending the issuing of penalties to the Engineers Representative for contravention of the EMP.
• Keeping a register of complaints on site and recording community comments and issues.
• Perform all duties in accordance with CCCC policies, processes, systems and procedures.

Job Requirement:

Registered with National Environment Agency (NEA) and have at least three (3) years of post-registration and practical experience relevant to the scope of works of the contract. Local candidates with LTA experiences will be advantage.

Quality Supervisor (QAQC)

Location: Penjuru Place (shuttle bus provided)

Monday - Friday 8am - 5.30pm

The Quality Supervisor is responsible for ensuring timely and effective implementation of the company's policies, procedures, and standards involved in assuring the quality of manufactured products and customer satisfaction, as well as for conducting quality control activities. The Quality Supervisor strives to ensure the facility adheres to quality licenses, standards and certifications.

A successful candidate will collaborate closely with functional areas such as Manufacturing, Procurement, Mfg. Engineering, Sustaining Engineering, Product Lines, R&M and Geozones regularly as well as presenting to internal teams plans and updates.

Job Responsibilities:

• Supervise and lead Quality Assurance and Quality Control personnel.
• Maintain site Quality Management System.
• Update QMS records and maintain all necessary documentation and certificates.
• Responsible for following management of change as processes and procedures are updated as per QMS requirements.
• Perform regular process audits in Manufacturing areas and functional areas, including technical work instructions, processes, procedures, and competence and ensure compliance.
• Generate CARs related to any deficiencies and track them to completion.
• Keep competency records up-to-date.
• Conduct training related to QMS, procedures, WIs, others.
• Actively participate in Contract Reviews.
• Develop customer QCP Plans. Ensure contractual requirements are built into Quality Control plans.
• Actively participate in Pre-Production meetings.
• Coordinate Client visits, and audits and constant communication to demonstrate our commitment and promote the Corporate Quality Management System.
• Drive action trackers to completion, related to customer audits, manufacturing reviews or qualification process.
• Coordinate TPIs per customer QCPs, and per production schedule. Ensure documentation meet requirements.
• Review/release WOs from a Quality point of view.
• CPARs/NCRs/COPQ; monitor performance/trends, data analysis, and evaluate the effectiveness of corrective actions to ensure that the required improvements are sustained. Actively participate in RCA. Monitor/track other Quality KPIs.
• Coordinate with product design engineers and manufacturing engineers the requirements in the quality plans and inspection and test plans to be aligned with their engineering design criteria, production schedules and customer requirements.
• Coordinate quality assurance plans for new PNs/product introductions.
• Review and approval purchased materials/products mill test certificates if it complies with the required company specifications and/or applicable industry standards prior to acceptance and use.
• Ensure quality control inspection and testing activities are performed in accordance with Global MFG QMS, customer QCPs/Inspection matrices, and/or local procedires and work instructions.
• Manage non-conformance process in accordance with Global MFG QMS.
• Identify a minimum of two continuous improvement projects per year to lead and complete with measurable improvement to the business in terms of margin, quality, etc
• Any other delegated responsibilities as instructed by his direct supervisor within the timeframe specified safely and efficiently to meet business requirements, provided the instruction is reasonable and you are capable and deemed competent to fulfil these.

Job Requirements:

• 5 to 8 years of experience with ISO-9001 and API Q1
• Minimum 5 years of experience in QA/QC role in the manufacturing environment
• Excellent written, reading, and oral communication in English
• Computer literate and familiar with Microsoft Office software at a minimum
• Fast learner, results-oriented and independent with strong interpersonal skills
• Possess strong customer service skills, i.e. listening, follow-through, and willingness to help
• ISO 9001 and API Q1
• Certified Auditor
• Ability to read engineering drawings
• Ability to interpret MTCs (Material Test Certificates) against the Company specifications
• Skilled at data mining (Excel Pivot Tables, other Excel tools)

Preferred

• Lean / Six Sigma experience
• Certified Lead Auditor
• Root Cause Analysis implementation experience
• Power BI dashboards.

We are seeking a dedicated and organised Credit Control executive to support the Finance Manager. You will play a crucial role in supporting the credit management function, including liaision with customers and internal staff. If you are proactive with a positive attitude, we are inviting you to join our organisation.

Duties:

• Responsible for credit control activities, which would include the following:
• Manage and maintain debtor's accounts to ensure the accounts are current.
• Monitor Accounts Receivables closely and ensure timely update of receipts from clients into accounting system.
• Close liaison with customers to ensure the timely collection of payment.
• Support any duties with our billing team to ensure in compliance to accounting standards, government regulations, internal policies and credit control policies.
• Any other ad-hoc duties assigned.

Requirements:

• Past experience as a Credit Controller is favourable, preferably in a fast-paced business environment
• Exceptional organisational skills and attention to detail, with the ability to multitask effectively
• Ability to multi-task
• Strong problem-solving abilities and the capacity to work independently with minimal supervision
• Basic knowledge of accounting system experience
• Proficiency in using Microsoft Office Suite (Word & Excel)
• Professional demeanour and the ability to interact confidently
• Discretion and the ability to handle confidential and sensitive information with integrity
• Flexibility and adaptability to accommodate changing priorities and tasks

Location:

• We are located in the West, 3 minutes walk from Gul Circle MRT

You may also email us your resume to [email protected].

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Industry/ Organization Type: Chemicals Distribution and Manufacturing

Key Responsibilities

• Handle all goods' receiving/discrepancies/quality or quantity issue
• Handle all incoming packagings' receiving/discrepancies/ quality or quantity issues\
• Manage all matters related to Stuffing and unstuffing containers
• Assist Production Controller to issue Batch card and MTF
• Assist Production Controller to check FG status/stencil/labelling
• Assist QC team to maintain SDS folder, keep raw material and Finished goods SDS updated
• Assist QC team on product or sample monitoring, update monitoring report
• Assist QC team on new lab blend request, sample retrieval request
• Assist QC team on lab retain sample management and record
• Manage trading goods arrangement to ensure all ready for customer collection or ready for loading
• Bi-weekly stock count, update stock report to Production Controller
• All workers PPE safety check especially weekend work day
• Supervise and manage on production blending processes
• Pre-arrangement of packaging for production
• Manage production raw material checking before production start
• Manage raw material return status before store at warehouse
• Handle production QC testing, issue COA
• Attend to production workers' queries
• Documentation works such as labels checking, documents compiling and filing
• QC check on insect repellent spray filled bottles and boxes
• Regular check on factory and production surrounding to ensure no chemical spillage
• Regular check on production equipment and facilities to ensure work in good condition
• Ad-hoc work assigned by supervisor

Job requirements

• Diploma or Degree in related field such as Chemical Engineering
• Minimum 2 years of experience in laboratory testing is an added advantage
• Willing to perform shift work

Element has an opportunity for an experienced Quality Engineer. Reporting to the Principal Quality Manager, you are an essential member of the management team and responsible for the overall quality performance. This includes implementation, maintenance and improvement of Element quality management system (QMS). The successful candidate will have a sound working knowledge of ISO/IEC 17025, ISO/IEC 17020 or ISO/IEC 17065 requirements in relation to testing, calibration inspection and certification.

In this role, you will have interaction with clients, Accreditation Bodies and will be responsible for advising operational colleagues of the importance of quality, accuracy and integrity in the provision of the testing, calibration inspection and certification services we provide.You will be involved in leading quality at a local level and will work closely with the Principal Quality Manager to ensure that Element quality policies, processes and procedures are effectively implemented. As a quality leader within Element you will be capable of driving a culture of quality assurance and quality improvement, working closely with your operational colleagues and the wider Element quality community.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Ensuring all staff buy-in to the effective and efficient implementation of Element quality policies and procedure by providing advice, guidance and support on quality issues to Element Singapore and Malaysia business units.
• Driving quality improvements at every opportunity and proactive participation in continuous improvement and process improvement projects and ensure effective adoption of Element e-QMS throughout Element Singapore and Malaysia business units.
• Proactive participation in projects to deliver identified Quality objectives and contribute to and drive key initiatives to improve Quality awareness and compliance.
• Management of and participation in scheduled internal audits across management system and technical disciplines and proactively monitoring laboratory test equipment for calibration currency and advising management of upcoming schedules,ensuring corrective and preventive actions identified within specific laboratories are implemented and verified in a timely manner.
• Represent Element Singapore and Malaysia business units during assessments by accreditation bodies and audits by clients and controlled document holding and arrange to update appropriate documentation as necessary, control and issue of Element Singapore and Malaysia Quality Management Systems documentation and participate in the internal audit programme to monitor implementation of quality policies and procedures.
• Manage external and internal proficiency testing programs of all Element Singapore and Malaysia business units and prepare compliance and improvement metrics for Element Singapore and Malaysia business units quality as required.
• Writing and reviewing quality documentation as required and effective and efficient management of personal work schedules and timely generation of Element Singapore and Malaysia business units quality reports.

Job Requirements:

• Minimum Bachelor of Science or Engineering qualification.
• Proven experience (minimum two years) of managing quality management systems within a multi-discipline testing, inspection and certification environment, preferably multi-location.
• Demonstrable experience auditing against ISO/IEC 17025, ISO/IEC 17020 and ISO/IEC 17065.
• Sound knowledge of equipment calibration and analysing proficiency test data.
• Knowledgeable in uncertainty of measurement and risk assessment and hands-on experience with Element e-QMS preferable.

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

The School of Mechanical & Aerospace Engineering (MAE) invites applications for the position of Research Associate.

Key Responsibilities:

• Work on human-like traffic simulation, with the focus of modeling traffic behaviors from large-scale real-world datasets.​
• The work will involve traffic scene representation, behavior modeling with common sense and prediction, generating road layouts, initializing states of traffic agents, rendering in physical simulators, and experimental validation.

Job Requirements:

• At least have a Masters Degree in Mechanical Engineering, Robotics, Mechatronics, Automation and Control Engineering, Artificial Intelligence (AI), etc.
• Relevant working experience will be preferred.
• Strong background in autonomous driving, simulator, AI, and automation.
• Good communication skills and the ability to work independently and facilitate projects with minimal supervisiont
• Able to contribute to Journal/Conference papers with good presentation skills
• Able to plan and organize well and adhere to deadlines.

We regret that only shortlisted candidates will be notified.

HR Functions

· Assist in recruitment and hiring process for Direct employee

· Prepare and monitor work permit (new or renewal) for Direct employee

· Prepare letters for direct employee: employment / salary adjustment /increment / promotional

· Update foreign workers levy report

· Prepare payroll for direct workers /staff

· Income tax submission for direct Foreign Worker

· Maintenance of hard copy / soft copy of personal files for direct employees

· Apply leave, scan MC, leave form into InfoTech system on behalf of the production worker

· Check Infotech system on direct staff attendance (ensure all are up to date)

· Assist in staff on boarding process such as create & issuing door access and uniform

· Preparing for Account opening for Direct workers

· Generate and prepare daily attendance record

· Coordinate BCA Core-trade training & CSOC procedure

. Any other adhoc duties assigned

General admin duties

· Assist in company events

· Assist in handling staff housing issues

· Flight booking for foreign workers on home leave and repatriation

· Updating of monthly staff contact List

· Checking CCTV and door access

· Update MHC system, issue MHC card to staff, download invoices etc

· Any other job as assign by the Management

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description:

1. Performing F.A inspection and inspection of parts and products with desktop measuring tools / CMM / Smart scope at the incoming / outgoing / in-process gate.
2. To prepare and generate standard inspection report and lead team in performing quality inspection.
3. Monitor on critical customer products, with a corrective and preventive action programs in managing customer complaints / improvement plans.
4. Administer and work on continuous improvement program in achieving good process control.
5. Provide technical guidance to group of inspectors.
6. Manage customer complaints, corrective and preventive action programs.
7. Work closely with customers and inter-department to meet the quality requirements.
8. Experience in calibrating measuring equipments.

Requirements

• Preferred to have NTC / Diploma in related engineering field.
• Required to know-how in using desktop measuring tools, and other equipment such as CMM, Smart Scope, Roundness Tester and Roughness Tester
• Computer competancy.

-Familiar with usage of commonly-used QC testing / measuring instrument

-Organised, methodical, meticulous, pro-active

-Visual Inspection

-Able to follow through with colleagues and vendors in a firm manner to ensure quality requirements are upheld and faults rectified

-Responsible, team player, able to communicate and integrate

-Adhoc duties may be assigned

-Perform product inspections, in-process inspections, and Final inspections prior to delivery

-Prepare QC reports

-Communicate in-house and with vendors and products faults, and follow up to ensure rectification

Perform third party inspection and assist with inspection coordination

SPECIFIC RESPONSIBILITIES

• Review job file prior to inspection to ensure required work scope is understood.
• Prepare equipment and documentation necessary for the inspection.
• Responsible for following detailed instruction provided.
• Check draft field report and organize report before handing over to Coordinator.
• Generate and issue final reports.
• Update on daily activities including circumstances / problems encountered during inspection
• Maintenance of equipment and other apparatus used.
• Liaise with client on technical issues when necessary.
• Maintain draft report format / template.
• Maintain equipment used.
• Provide guidance to trainee or junior inspectors when on the job.
• Supervise inspection team when required.
• Assist in daily operations & coordination when required
• Any other tasks as assigned by superior.
• Operate and applies judgement to the highest standard of ethics in accordance with SGS standard of ethics and integrity
• Inspection includes fabrication of heavy structures, hull, piping, valves, drilling equipment, machineries, cables, E&I systems etc.
• Inspection location include shipyards, workshops, onshore and offshore installations or any other locations assigned.

REQUIREMENTS:

• Tertiary education in engineering or related field
• Related technical qualification and work experience
• 5-10 years of experience in engineering
• Additional qualifications such as CSWIP 3.1, 3.2 or equivalent Certified Welding Inspector (“CWI”) from American Welding Society (“AWS”), API 510 (Certified Pressure Vessel Inspector), API 570 (Piping Inspector), PCN or ASNT Level II in PT, MT, UT & RI would have an added advantage
• Technical knowledge and experience in related field.
• Able to work independently and to coordinate several activities simultaneously in a fast-paced environment.
• Works well under pressure, challenges status quo.
• Good interpersonal skills and able to interact with all levels of management and clients.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

-Familiar with usage of commonly-used QC testing / measuring instrument

-Organised, methodical, meticulous, pro-active

-Visual Inspection

-Able to follow through with colleagues and vendors in a firm manner to ensure quality requirements are upheld and faults rectified

-Responsible, team player, able to communicate and integrate

-Adhoc duties may be assigned

-Perform product inspections, in-process inspections, and Final inspections prior to delivery

-Prepare QC reports

-Communicate in-house and with vendors and products faults, and follow up to ensure rectification

Job Description:

1. Performing general inspection of parts and products at the Incoming/In-Process/Outgoing gate.
2. Generate Standard QA/QC inspection report.
3. Administrative tasks.
4. Logistics support.

Competence Requirements

• Preferred Secondary, NTC certification holder from related CNC/Fabrication industry.
• Preferably with 2 years of related work experience in manufacturing environment for non-technical trained staff.
• Able to read part drawing, usage of measuring equipment are added advantage.
• Computer competency.

Technical Officer (Maintenance- Instrumentation & Control)

West – Jurong Island, pick-up near Jurong East MRT Station

Responsibilities:

• Carrying out Preventive and Corrective maintenance in accordance with maintenance plans and as work requests raised in the system.
• Maintaining accurate and up-to-date records of all activities performed in the associated systems.
• To perform all jobs in accordance to safe working practices followed in the plant.
• Interact with Operation Staff on maintenance works.
• To assist, supervise contractors assigned for specific works.
• Contributing to the development of asset maintenance plans
• To monitor and take appropriate action to maintain critical spares.
• Assist in liaising with external agencies for all regulatory compliances.
• Responding to emergencies in plant

Requirements:

• Preferably Degree or Diploma in Electrical or Electronics Engineering or equivalent College degree may be waived if equivalent, extensive related experience can be demonstrated.
• Skill sets required – through knowledge on types of process instruments, calibration of instruments/gauges, understanding of control/instrument drawings pneumatic/hydraulic circuits, computers, knowledge in PLC and DCS would be added advantage
• At least 3 to 5 years of relevant experience in a similar capacity, within a Power plant or related Industries.
• Self-motivated independent and has sound analytical and communication skills and is a team worker.
• May be required to work beyond office hours & weekends.

Others:

• Working location: Jurong Island
• 5-day work week
• Company transport provided from Jurong East MRT

Interested applicants, please forward your detailed resume including your last drawn salary, expected salary and date of availability to:

[email protected]

Please indicate the position that you are applying on the subject.

(All applications will be treated in strictest confidence. We regret that only shortlisted candidates will be notified)

By submitting your personal data and/or resume to PacificLight (“us”) or to [email protected], you shall be deemed to have given consent to us collecting, using, and disclosing your personal data for the purpose of assessing your job application. Information collected may also be disclosed to PacificLight Group of Companies (“PacificLight”) which includes PacificLight Power Pte. Ltd and PacificLight Energy Pte. Ltd. for this purpose. Please read our privacy policy here.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

The Quality Assurance (QA) Specialist is responsible for the development, implementation and promotion of QA related activities and compliance in the company. He/ She is also responsible to:

• Establish, implement, maintain & improve the management systems, namely: ISO 9001, ISO 14001, SS 651.
• Establish, implement, review & improve on management systems’ documentations, namely: policy, objectives, manual, procedures, forms, etc.
• Manage all system certification, improvement and upgrade issues.
• Plan, manage and execute all internal and external management system audits to ensure timely closure of issues raised during the audits.
• Plan and conduct management reviews.
• Develop and oversee the implementation of all QA activities and support in HSE activities.
• Follow-up on issues to ensure timely closure of HSEQ-related reports, namely: customer complaint reports, corrective action reports, incident reports, etc.
• Prepare and submit Monthly reports.
• Support in the preparation and submission of the Safety Case.
• Participate as a team member in risk / HSE assessment team.
• Participate in external provider audits, where applicable.
• Co-ordination of Global QA initiatives and projects.
• To perform any other duties or assignments as assigned by superiors.