Academic qualifications in engineering or project management with minimum experience of 2 years.

Involve acting as frontline support for the Microsoft Project Enterprise system to all levels of the organization.

The daily activities will include, but not be limited to, assisting users with Project Assignments for weekly timesheets, assisting Project Managers in the constructions and upkeep of Development Project Schedules, providing reports on Project Cost and Status as requested, ensuring MS Project and SAP are kept in sync through manual updates, continuous maintenance of user database for MS Project System.

Experience requested for this position will be a passion for planning and customer service.

Microsoft Office proficiency is a must and experience in scheduling software (MS Project / Oracle Primavera P6) is a plus but not required.

A strong personality and willingness to champion the department policies to all users will be very beneficial.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Responsibilities:

· Develop systems design, programming and selection of equipment instrumentation and controls.

• Prepare and review I&C specifications, requirement, drawings, e.g. instrument lists and datasheets/specifications, ICA panels, control valve, process functional description and SLD

· Responsible for Single Line Drawing, Control Schematic drawings, and programming of SCADA/HMI necessary modification of existing programme.

• Participate in the development of P&ID's, package specifications, logic diagrams, cause & effects, control narratives
• Prepare RFQs, technical bid summaries and make purchase recommendations
• Lead and Interface with suppliers, clients, and other engineers on ICA

· Execution of projects.

· Startup, testing, commissioning and troubleshooting of plants

· Preparation and support tender team for tender and proposal activities.

Requirements:

• Degree in Electrical & Electronics / Instrumentation / Automation Engineering.
• Minimum 15 years relevant working experience, preferably with experiences in Instrumentation and Control.
• Knowledge in Instrumentation and Control.
• Knowledge in high end fieldbus communication (eg. profibus, modbus and other high end communication protocol).
• Able to read & understand single line diagram and generate Bill of Materials from single line diagram.
• Knowledge on control, schematics, motor controls and materials take-off.
• Knowledge in Mitsubishi / Siemens / Schneider / Omron PLC software would be an added advantage.
• Those with relevant project management, process design, and service & maintenance experience will be an added advantage.
• Possess good communication and interpersonal skill.
• Highly motivated, driven by excellence and having an eye for details.
• Able to take on numerous challenging tasks while simultaneously meeting high standards and deadlines/vision.

An attractive remuneration package, benefits, challenging work environment and excellent career growth in the company would be offered to the successful candidate.

Additional Information

Job Responsibilities:

• Ensure all laboratory tests are well managed and performed including testing on raw materials, intermediates and finished products
• Ensure all laboratory instruments and equipment are maintained and calibrated
• Manage the inventory of quality reference materials such as QC reagents and lab consumables
• Prepare daily QC report, relevant work instructions and validation protocol or reports
• Ensure documents and quality records are maintained for easy retrieval
• Manage operations towards timely support to meet factory analytical request
• Develop training to build quality and safety awareness
• To maintain cleanliness of laboratory and glassware
• Handle administration work of factory when required

Job Requirements:

• Min Nitec / Diploma in Chemical Process Technology or its equivalent
• Entry level (preferably 2 years experience in handling wet chemistry and laboratory management)
• Preferably with knowledge / skills on ISO900, ISO 13485 and ISO14001 Quality Management knowledge and current Good clinical/ laboratory/ manufacturing/ pharmaceutical practices (cGXP)
• Strong troubleshooting skills with various analytical instruments
• Good verbal and written communication and interpersonal skills
• Positive working attitude with sense of urgency
• Able to work independently as well as an effective team player
• Self-driven and motivated to improve processes
• Working hours: 8.00am - 4.45pm
• Work location : 19 Jalan Tukang

Job Description & Requirements

• Monitoring and verifying that the Environmental Management Plan (EMP) is adhered to at all times and taking action if the specifications are not followed.
• Monitoring and verifying that environmental impacts are kept to a minimum during the planning and design and construction phases of the project.
• Assisting the project proponent in ensuring that all environmental authorisations have been obtained.
• Reviewing and approving environmental objectives and targets and assisting the Contractor in finding environmentally responsible solutions to problems.
• Conducting, surveillance, monthly inspections and detailed audits.
• Compiling and completing checklists in order to aid the surveillance and inspection requirements.
• Keeping records of all activities/incidents concerning the environment on site and issuing of spot fines for transgression of activities identified in the EMP.
• Recommending the issuing of penalties to the Engineers Representative for contravention of the EMP.
• Keeping a register of complaints on site and recording community comments and issues.
• Perform all duties in accordance with CCCC policies, processes, systems and procedures.

Job Requirement:

Registered with National Environment Agency (NEA) and have at least three (3) years of post-registration and practical experience relevant to the scope of works of the contract. Local candidates with LTA experiences will be advantage.

Quality Supervisor (QAQC)

Location: Penjuru Place (shuttle bus provided)

Monday - Friday 8am - 5.30pm

The Quality Supervisor is responsible for ensuring timely and effective implementation of the company's policies, procedures, and standards involved in assuring the quality of manufactured products and customer satisfaction, as well as for conducting quality control activities. The Quality Supervisor strives to ensure the facility adheres to quality licenses, standards and certifications.

A successful candidate will collaborate closely with functional areas such as Manufacturing, Procurement, Mfg. Engineering, Sustaining Engineering, Product Lines, R&M and Geozones regularly as well as presenting to internal teams plans and updates.

Job Responsibilities:

• Supervise and lead Quality Assurance and Quality Control personnel.
• Maintain site Quality Management System.
• Update QMS records and maintain all necessary documentation and certificates.
• Responsible for following management of change as processes and procedures are updated as per QMS requirements.
• Perform regular process audits in Manufacturing areas and functional areas, including technical work instructions, processes, procedures, and competence and ensure compliance.
• Generate CARs related to any deficiencies and track them to completion.
• Keep competency records up-to-date.
• Conduct training related to QMS, procedures, WIs, others.
• Actively participate in Contract Reviews.
• Develop customer QCP Plans. Ensure contractual requirements are built into Quality Control plans.
• Actively participate in Pre-Production meetings.
• Coordinate Client visits, and audits and constant communication to demonstrate our commitment and promote the Corporate Quality Management System.
• Drive action trackers to completion, related to customer audits, manufacturing reviews or qualification process.
• Coordinate TPIs per customer QCPs, and per production schedule. Ensure documentation meet requirements.
• Review/release WOs from a Quality point of view.
• CPARs/NCRs/COPQ; monitor performance/trends, data analysis, and evaluate the effectiveness of corrective actions to ensure that the required improvements are sustained. Actively participate in RCA. Monitor/track other Quality KPIs.
• Coordinate with product design engineers and manufacturing engineers the requirements in the quality plans and inspection and test plans to be aligned with their engineering design criteria, production schedules and customer requirements.
• Coordinate quality assurance plans for new PNs/product introductions.
• Review and approval purchased materials/products mill test certificates if it complies with the required company specifications and/or applicable industry standards prior to acceptance and use.
• Ensure quality control inspection and testing activities are performed in accordance with Global MFG QMS, customer QCPs/Inspection matrices, and/or local procedires and work instructions.
• Manage non-conformance process in accordance with Global MFG QMS.
• Identify a minimum of two continuous improvement projects per year to lead and complete with measurable improvement to the business in terms of margin, quality, etc
• Any other delegated responsibilities as instructed by his direct supervisor within the timeframe specified safely and efficiently to meet business requirements, provided the instruction is reasonable and you are capable and deemed competent to fulfil these.

Job Requirements:

• 5 to 8 years of experience with ISO-9001 and API Q1
• Minimum 5 years of experience in QA/QC role in the manufacturing environment
• Excellent written, reading, and oral communication in English
• Computer literate and familiar with Microsoft Office software at a minimum
• Fast learner, results-oriented and independent with strong interpersonal skills
• Possess strong customer service skills, i.e. listening, follow-through, and willingness to help
• ISO 9001 and API Q1
• Certified Auditor
• Ability to read engineering drawings
• Ability to interpret MTCs (Material Test Certificates) against the Company specifications
• Skilled at data mining (Excel Pivot Tables, other Excel tools)

Preferred

• Lean / Six Sigma experience
• Certified Lead Auditor
• Root Cause Analysis implementation experience
• Power BI dashboards.

We are seeking a dedicated and organised Credit Control executive to support the Finance Manager. You will play a crucial role in supporting the credit management function, including liaision with customers and internal staff. If you are proactive with a positive attitude, we are inviting you to join our organisation.

Duties:

• Responsible for credit control activities, which would include the following:
• Manage and maintain debtor's accounts to ensure the accounts are current.
• Monitor Accounts Receivables closely and ensure timely update of receipts from clients into accounting system.
• Close liaison with customers to ensure the timely collection of payment.
• Support any duties with our billing team to ensure in compliance to accounting standards, government regulations, internal policies and credit control policies.
• Any other ad-hoc duties assigned.

Requirements:

• Past experience as a Credit Controller is favourable, preferably in a fast-paced business environment
• Exceptional organisational skills and attention to detail, with the ability to multitask effectively
• Ability to multi-task
• Strong problem-solving abilities and the capacity to work independently with minimal supervision
• Basic knowledge of accounting system experience
• Proficiency in using Microsoft Office Suite (Word & Excel)
• Professional demeanour and the ability to interact confidently
• Discretion and the ability to handle confidential and sensitive information with integrity
• Flexibility and adaptability to accommodate changing priorities and tasks

Location:

• We are located in the West, 3 minutes walk from Gul Circle MRT

You may also email us your resume to [email protected].