Job Description

• Industry/ Organization Type: Chemical Manufacturing
• Position Title: QC Technician
• Working Location: Tuas
• Working Hours: Monday – Friday, 8.30 am – 5.30 pm
• Salary Package: Up to $2,500 + Transportation Allowance + AWS + VB (Up to 4 months)
• Duration: Permanent

Key Responsibilities

• Report directly to the section engineer and/or designate
• Shall carry out all laboratory tests and measurements accurately in accordance with procedure and upkeep/maintain the instruments/facilities in good running conditions
• Shall prepare standards and reagents for analysis in accordance with procedure and ensure that all related documentation is maintained
• Shall perform basic maintenance and troubleshooting of instruments and write the maintenance report after troubleshooting/maintenance
• Shall handle ISO Documentation/Raw Data for QA Department
• Shall accurately update internal Statistical Process Control (SPC) charts and monitor the charts
• Shall assist in training staff for QC Section-related activities when required
• Shall maintain and check inventory of all storage samples and ensure all relevant records are maintained
• Shall perform receiving of QA department purchase and ensure that received items and all related documents are correct at the point of receipt
• Shall assist in audit preparation
• Shall support the QA Section in its activities as and when required
• Shall be involved in near-miss identification and provide work improvement (QEHS) suggestions
• Shall maintain the general upkeep and cleanliness of the laboratory and related areas by performing housekeeping
• Shall strictly adhere to all EHS/QMS procedures in all aspects of the activities and observe line discipline and 5S
• Shall perform any other tasks as instructed by the supervisor, engineer, QC section manager and HOD

APPLY NOW!!!

• At least a Diploma in Chemical or science discipline
• Experience with analytical instruments like ICP-MS, AAS, etc.
• Basic understanding of ISO9001, ISO14001 and OHSAS18001 standards will be an advantage
• Proficient in Microsoft Office Tools

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65938 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

We are representing a global Automotive Tier 1 Supplier (MNC) who has a huge R&D presence in Singapore in recruiting ;

APAC Customs Compliance Executive

Job Description

• Supporting the Regional Head in evaluating the current state, setting objectives, and implementing strategies. Through the introduction of innovative work methodologies and collaboration with regional stakeholders, you aim to elevate the customs setup in the APAC region into a trusted and proactive function that enhances business value.
• Identify and communicate customs-related risks and opportunities to the Head of Customs APAC, peers in the Group Customs team, and other stakeholders in the region.
• Collaborate with the regional Head and the entire customs community to develop, roll out, and maintain a customs governance framework, ensuring consistency, efficiency, and sustainability in customs compliance across the region and beyond.
• Conduct customs-specific training in collaboration with the Global Knowledge Manager, adhere to legislation and authorities, and implement measures to enhance performance and compliance across operational teams, shared service centers, and third-party service providers.
• Address customs-related requests with timely and detailed work plans, resource schedules, project estimates, and status reports.
• Develop and nurture relationships with regional customs and regulatory authorities, provide advice on customs procedures to reduce duty obligations, prepare assessments and reports, monitor legal developments, and participate in customs audits as needed.

Requirement.

• Minimum University degree within business/finance/informatics or an interdisciplinary education, such as international business law or business informatics.
• You have gained corporate experience within customs/taxes/controlling or finance or have been working for a multinational business advisory company in the area of customs.
• You are familiar with Free Trade Agreements and their application in Asia
• You demonstrate good communication skills, openness, a cooperative working style and a distinct ability to work with people across cultures and countries.
• Fluent English both in speaking and writing.
• You prefer a team-oriented way of working and show high assertiveness

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

EA License No: 12C6254 | EA Personnel Registration No: R1879665 |

WE ARE A FOOD PROCESSING AND DISTRIBUTION COMPANY HEAD QUARTERED IN SINGAPORE. LOOKING FOR THE IDEAL COLLEAGUE WHO CAN PERFORM THE FOLLOWING:

• YIELD MANAGEMENT OF PROCESSING RELATED GOODS
• CONVERSION OF GOODS IN OUR COMPANY SYSTEM I.E. WHOLE FISH TO FILLETS
• INVENTORY MANAGEMENT INCLUDING REORDERING OF GOODS
• ENSURE PROPER SOPS TO MEET LOCAL AND COMPANY REQUIREMENTS WHICHEVER IS HIGHER I.E. LABELLING, OPERATING PROCEDURES
• MAINTAIN & ENFORCE HYGIENE AND SAFETY FOR THE WORKPLACE
• CREATE AND IMPLEMENT SOPS WHERE NEEDED
• LEAD AND TRAIN THE TEAM ON ALL COMPANY STANDARDS
• POINT OF CONTACT BETWEEN MANAGEMENT AND THE GROUND TEAM
• ENUSRE HALAL COMPLIANCE

ONLY FRESH GRADUATES FROM POLYTECHNIC OR UNIVERSITY (2023 AND 2024) MAY APPLY.

SINGAPOREANS, PR AND WOR PERMIT HOLDERS ARE ALL WELCOME.

WORK AREA: WESTERN PART OF SINGAPORE NEAR CLEMENTI/WEST COAST.

5 DA WORI

• Location: North
• 5 days work week
• Basic up to $4500
• AWS provided
• MNC

Job Scope:

• Monitor and manage the credit control function.
• Assess and review credit terms and limits for customers.
• Analyze creditworthiness of new and existing customers.
• Monitor and track overdue payments.
• Initiate collection activities and follow up on outstanding accounts.
• Coordinate with sales and customer service teams to resolve credit-related issues.
• Prepare reports on credit status and aging accounts.
• Implement credit control policies and procedures.
• Collaborate with internal stakeholders to improve credit processes.
• Provide recommendations for credit policy enhancements.
• Ensure compliance with credit management regulations.

Job Requirement:

• Good working experience in credit recovery / AR collection.
• Able to work independently without much guidance

To Apply, kindly click on the "APPLY NOW" button.
We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: QA Engineer / Quality Assurance Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that ISO13485 and FDA 21 CFR Part 820 systems are adequately maintained, and continuous improvements are implemented
• Coordinate with various functions to ensure awareness and understanding of the Quality Management System.
• Plan and coordinate gap analysis exercises and provide advice on bridging the gap
• Manage and oversee quality audits by plan and ensure quality audits findings and recommendations are rectified and implemented
• Apprise management of quality audit findings and corrective actions taken
• Ensure that the procedures and processes prescribed by the Quality Management System are in place and implemented per requirement
• Review the Quality Management System periodically to assess continued suitability and areas of possible improvement
• Arrange for ISO13485, ISO14971 and FDA 21 CFR Part 820 awareness training and further refresher training as needed
• Coordinate and plan work of external audit such as Customer, ISO certification and Regulatory bodies
• Ensure that systems and procedures are in compliance with ISO13485, ISO14971, FDA 21CFR Part 820, and GDP requirements
• Mentor / supervise as assigned and ensure timely and accurate completion of quality projects
• Support Plant wide audit/ inspection activities and special projects, as assigned
• Able to travel for suppliers/customers visits
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Bachelor’s Degree in Quality Management or Electronics Engineering
• At least 3 years of working experience in Quality Management Systems, and in a manufacturing environment
• Excellent hands-on knowledge of Quality Management Systems primarily in ISO 13485 and FDA 21 CFR Part 820
• Lead, mentor and facilitate problem-solving and quality improvements
• Establish controls system required in ISO13485 & FDA registered facility
• Strong communication and interpersonal skills
• FDA Inspection experience preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65191 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Responsibilities:

Support strategic equipment control and/or supplier data collaboration activities

• Support world-wide alignment and continuous improvement of practices.
• Evaluate global needs and cultivate global relationships.
• Support and mentor equipment control teams or data collaboration teams worldwide.
• Work with subject matter experts (SMEs) to identify business process gaps and Best Known Methods (BKMs) to address.
• Facilitate communication plan for all SWAT activities to/from stakeholders, participants, and management.
• Refine SWAT charter, and build roadmap going forward for world-wide alignment and continuous improvement of practices.
• Evaluate the quality of data collected, drawing conclusions based on this data and initiating follow-up action items.
• Partner with GQ teams, OCT PEE, OCT MAE, SMAI and IT to ensure all business needs are properly documented, validated, and escalated as needed.
• Determine if project objectives have been met or if more effort is required.
• Provide direction or facilitation of practical application of equipment control or supplier data collaboration systems within the MFG environment.

Demonstrate Individual Competence/Technical Expertise

• Provide technical consulting and hands-on assistance to Fab teams for creation and/or identification of best solutions.
• Evaluate third-party software and/or hardware selection.
• Recognize functional and business process gaps. Formulate proposals for closing them.
• Increase technical expertise by participating in classes conferences and researching existing literature and existing Micron expertise.

Program Management

• Demonstrate ability to move projects effectively through project lifecycle – initiate, plan, execute, and close – while balancing time, cost, quality, scope and risk/opportunity constraints.
• Motivate stakeholders and all project team members to take ownership of project and its success.
• Direct and coordinate the activities of others to accomplish project tasks successfully.
• Define metrics to gauge project success.

Communication

• Provide periodic updates based on project criticality to stakeholders and team members on project status, progress, and roadblocks/opportunities..
• Offer and communicate strategic ideas and thinking to meet corporate objectives. Listen to customer’s and stakeholder’s input/feedback and act to maximize benefit to Micron and meet corporate goals.
• Build and maintain external and internal relationships to broaden influence and increase learning opportunities in the PCS area.
• Provide communication to the World-wide equipment control and/or supplier data collaboration groups on lessons learned, project repositories, summits, new technologies, conference proceedings and Best Known Methods (BKMs).
• Demonstrate cultural sensitivity - Show respect for different cultures and languages.
• Communicate effectively with vendors/suppliers. Understand and use appropriate communication channels (other Central Team members, Purchasing, etc.). Clearly and accurately communicate Micron’s needs and objectives to vendors/suppliers. Adheres to company ethics and confidentiality policies regarding vendors/suppliers.

Job Scope:

• Responsible for obtaining timely payments from customers within agreed payment terms, maximizing cash flow and reducing AR outstanding.
• Resolve billing dispute with internal and external party
• Ensure billing and allocation are perform accurately and promptly
• Conduct credit evaluation and periodic review on new or existing customers
• Review and release orders on credit hold to ensure daily operation is carry out smoothly
• Credit control and debt recovery
• Timely completion of month end activities
• Prepare month end reports and perform variance analysis
• Assist in continuous process improvement projects or new initiatives
• Liaise with internal and external auditor

Job Requirement:

• Min Diploma/Degree in Accountancy or any other equivalent certifications
• Able to start work immediately or within a short notice
• Able to use SAP would be an added advantage

Interested candidates do send in your resume to [email protected]

Attn: Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd (99C4599)

• 5 days work week
• Location: North/North East
• Basic up to $4600
• AWS & VB provided

Job Scope:

Quality System Engineer - Electronic, PCBA

• Oversee implementation of various management systems and business accreditations.
• Maintain and ensure appropriateness of Quality Manuals and Procedures.
• Analyze current and future procedural needs of the business.
• Manage the internal audit system and corrective action reporting system.
• Conduct Quality Systems audits and train/guide other auditors.
• Host external Quality System audits.
• Review Quality procedures related to plant improvement initiatives.
• Maintain Standard Operating Procedure content and coordinate issuance.
• Collect quality data for monitoring targets.
• Assist with quality awareness training.
• Undertake special projects as required.
• Ensure quality control through appropriate reviews.
• Support/lead process and continuous improvement activities.
• Manage and monitor equipment calibration.
• Coordinate with Outsource Management for subcon selection and approval.
• Establish and improve subcon quality assurance and development system.
• Perform audits on new and existing subcons for quality evaluation.
• Involved in new production introduction and product transfer to subcon.
• Manage Corrective Action Report process and resolution.
• Work with subcons on customer complaint 8D.
• Develop and maintain policies to measure and ensure subcon performance.
• Monitor key quality metrics (Subcon OTD, system, process audit, yield).
• Establish sampling plan and testing criteria for incoming, site inspection or subcon production.

Job Requirement:

• Diploma/Degree in engineering studies with relevant working experience in Quality Management Experience.
• ISO9001, ISO14001, ISO45001, ISO27001, ISO17025, MID-D, LNE, QC80000, IECEx80079 are the usual quality management system to be utilize across the work routine.
• Candidate with relevant experience in Electonic Manufacturing/PCBA Industry will be prioritized.

The successful candidate will be part of the Financial Planning & Control department in Finance Division.

Key Responsibilities

• Monitor, review and post monthly accruals for expenditure items.
• Handle divisions' queries on expenditure accounting.
• Review and monitor provision accounts and work with divisions/stations to clear provision/suspense accounts.
• Ensure that month-end closing activities (for example, amortisation of prepayments, raising of any required journal entries, etc.) are completed on time.
• Review and raise invoice/credit notes to subsidiaries/third parties on a timely basis.
• Assist with any required preparation of monthly/quarterly/half-yearly/annual reports.
• Assist the Executive in troubleshooting system issues, handling system enhancements, and performing User Acceptance Testing (UAT) where necessary.
• Assist in budgetary control procedures (for example, monitoring of operating expenditure against budget).
• Assist in annual operating budget exercise and/or forecast exercise.

Requirements

• Diploma in Accounting, Business Administration or Finance.
• Able to work independently, collaboratively and under tight deadlines.
• Adaptable to changes and a problem solver.
• Good interpersonal skills and communication skills.
• Proficient in Microsoft Office, knowledge of SAP will be advantageous.

We are seeking a dedicated and organised Credit Control executive to support the Finance Manager. You will play a crucial role in supporting the credit management function, including liaision with customers and internal staff. If you are proactive with a positive attitude, we are inviting you to join our organisation.

Duties:

• Responsible for credit control activities, which would include the following:
• Manage and maintain debtor's accounts to ensure the accounts are current.
• Monitor Accounts Receivables closely and ensure timely update of receipts from clients into accounting system.
• Close liaison with customers to ensure the timely collection of payment.
• Support any duties with our billing team to ensure in compliance to accounting standards, government regulations, internal policies and credit control policies.
• Any other ad-hoc duties assigned.

Requirements:

• Past experience as a Credit Controller is favourable, preferably in a fast-paced business environment
• Exceptional organisational skills and attention to detail, with the ability to multitask effectively
• Ability to multi-task
• Strong problem-solving abilities and the capacity to work independently with minimal supervision
• Basic knowledge of accounting system experience
• Proficiency in using Microsoft Office Suite (Word & Excel)
• Professional demeanour and the ability to interact confidently
• Discretion and the ability to handle confidential and sensitive information with integrity
• Flexibility and adaptability to accommodate changing priorities and tasks

Location:

• We are located in the West, 3 minutes walk from Gul Circle MRT

• Work and monitor suppliers and sub cons quality performance and work with those supplier/sub cons who shows trends of quality deterioration.
• Feedback and work with supplier on day-to-day non-conformance parts.
• To co-ordinate with QC inspector to perform daily inspection task.
• To provide quality awareness/training for QC Inspector /Technician to perform inspection job according to customer or internal requirements.
• Monitor in-house product quality performance.
• Responsibility for facilitating quality issues and manages daily activities of manufacturing QC.
• Initiate and follow up Corrective/Preventive Action Request (CAR/PAR) to supplier for non- conformance part.

Job Requirements:

• Diploma in Electronics, Electrical or Quality with 1-2 years of relevant experience in a QC environment.
• Knowledge in quality acceptability criteria for mechanical parts, PCB, PCBA, cable assemblies and electronics components an added advantage.
• Knowledge of quality control.
• Able to read and write inspection report.
• Organized and disciplined individual.
• Ability to work in a team setting to maximize results.

Interested applicants, please email your resume to [email protected]

E-Ployment Consultancy

EA License No: 09C0884

EAP Name/ Registered No: Ivan Mah/ R1108310

As a Manufacturing Central Team Quality SEAL Senior Engineer/Manager at Micron Technology, Inc., you will be a member of the worldwide Quality Team managing QDR, reducing variation and deviations for all Micron Fabs. Devising strategies to address specific problems. Specific to your role, your work will encompass the responsibilities of handing resources to enable the timely development of Quality Program for the network. Managing the respective Quality programs that will make FE Quality a success. As a solution provider, you will work with SMEs to identify their needs and to develop and implement reporting dashboard and data structure to meet their requirements for quality improvement. This will also extend to recommending improvements to meet the demands of swiftly changing interface technology. Setting up performing backups procedures for maintaining our data. Providing actionable insights in Frontend Global Quality Program through the analysis of facts and figures acquired from the network.

Additional Job Description:

• A solid and wide-reaching foundation in project and program management across different geological locations.
• Independent and self-motivated to see through the completion of projects
• In addition to possessing technical know-how, being communication savvy and be creative problem solvers
• Demonstrated high level problem solving skills, time management, organization and multitasking abilities
• Excellent verbal and written communication skills

Main Responsibilities:

• Preparation of routine QC samples for instrumental analysis and sensory evaluation
• Perform olfactive assessment of QC materials
• Results entry into SAP and other ERP
• Creation of material specifications
• Inventory management of laboratory consumables
• Basic maintenance of laboratory equipment and general housekeeping (5S)
• Conduct trials and prepare reports/results from trial for review by seniors/manager
• Support laboratory supervisors in analysis of results and CAPA

Job Requirements:

• Diploma in Chemical Process Technology or Perfumery and Cosmetic Science
• Prior experience in plant QC experience or chemical manufacturing or related industry is an added advantage
• Basic sensory evaluation skills and chemical knowledge

Interested candidates please send in your resume to [email protected]

Attn : Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd, EA License No.: 99C4599

Roles & Responsibilities

• Implements appropriate control measurements in accordance with QECP Design
• Ensure compliance with the latest environmental regulations
• Coordinate with the Construction Manager and QECP on the ECM Plan
• Proper documentation of all EHS records, certificates, notices and official related EHS correspondence
• Organize HSE promotion and health campaigns
• Assist Safety Officer in planning and directing the HSE functions
• Any other duty required to be performed by ECO

Requirements

• Must be NEA Registered ECO
• Registered ECO with more than 3 years post-registration and relevant practical experience in Civil Engineering Construction works with LTA Projects
• Good knowledge of Government Regulations relating to Occupational Safety, Health and Environmental
• Preferred to have experience in managing OHSAS 18K, ISO 14K, ISO9K

Disposition of Fab lots affected by planned or unplanned deviations (including those from Special Work Requests and Fab Conversions, or from Quality Deviations and Excursions). Work closely with Fab partners to identify and contain excursion material. Initiate and lead multi-functional MRB (Material Review Board) to conduct risk assessment and decide upon disposition of excursion material. Review and analyze proposed process conversion changes to ensure that the proposed manufacturing changes conform to current business standards, improve Micron’s competitiveness in terms of wafer yields and costs, and protect Micron’s product quality.

• Knowledge of Electrical and Physical Failure analysis of semiconductors
• Knowledge of semiconductor memory product and reliability testing
• Strong understanding of NAND FLASH operation and structure
• Intermediate understanding of wafer fab manufacturing process steps, functional probe and parametric testing methodologies
• Excellent statistical data analysis, troubleshooting and decision making skills
• Proven track record to work effectively in both an independent role and in team environments
• Excellent multi-tasking and problem solving skills
• Intermediate PC skills including MS Office Word, Excel and PowerPoint
• Ability to clearly communicate data and findings both verbally and in writing

Additional Job Description

Develops, evaluates, revises, and applies technical quality assurance protocols/methods to inspect and test in-process raw materials, production equipment, and finished products. Ensures activities and items are in compliance with both company quality assurance standards and applicable government regulations. Performs analysis and identifies trends in the inspection of finished products, in-process materials and bulk raw materials, and recommends corrective actions when necessary. Ensures that established manufacturing inspection, sampling and statistical process control procedures are followed. May assure compliance to in-house and/or external specifications and standards, such as GMPs and ISO regulations. Evaluates and analyzes the efforts in organizing, documenting, and interpreting inspection support documents and records.

Job Description

• Industry / Organization Type: Manufacturing
• Position Title: QC Engineer / Quality Control Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Work with Process Engineer & Engineering team on QC requirement
• Document inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

APPLY NOW!!!

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirements in PCB Assembly, quality requirements of plastic molding, die casting, extrusion, metal stamping and machining parts
• Able to converse with overseas suppliers

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65192 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Job Description

• Industry/ Organization Type: Freight Forwarding/ Warehousing
• Position Title: Trade & Compliance Executive
• Working Location: Cecil Street
• Working Hours: 5 days (Mon to Fri, 9 am – 6 pm)
• Salary Package: Basic + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Collaborate with cross-functional teams to enhance internal processes related to quotation speed, relevant shipping documents, inventory management (oversees WH), and supply chain planning in general.
• To assist in quotation matters.
• To liaise with partners on compliance matters.
• To ensure compliant coordination between pricing and operations team.
• To foster a culture of continuous learning and professional development within the team.
• Other necessary tasks as assigned.

APPLY NOW!!!

• Minimum Diploma holder.
• Critical Thinking & Problem-Solving skills.
• Ability to work independently and with initiative.
• MS Office skills.
• Candidates without experience are welcome to apply; training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65644 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Job Description

• Industry/ Organization Type: Private Education
• Position Title: Quality Assurance Executive/QA Executive (Hybrid Work Arrangement)
• Working Location: Bukit Timah
• Working Hours: Monday – Friday, 9 am – 6 pm
• Salary Package: Up to $4,500 + AWS
• Duration: Permanent

Key Responsibilities

• Support the Manager to conduct audit in compliance with standards relevant to higher education industry, including but not limited to, the Private Education Act, Private Education Regulations, EduTrust Certification Scheme and Enhanced Registration Framework.
• Analyze data collected from audit and/or assessment to identify performance gaps and monitor trends and evaluate process effectiveness for continual improvement.
• Work with other departments to understand applicable frameworks, organizational policies and procedures to look out for opportunities and recommend changes.
• Identify areas for improvement in audit and/or assessment processes.

APPLY NOW!!!

• Minimum Diploma with at least 2 years of experience in a QA role.
• Candidates with QA experience in Private Education Institution (PEI) will be advantageous.
• Knowledge and understanding of the Private Education Act, Enhanced Registration Framework and EduTrust Certification Scheme, and quality standards.
• Possess skillsets in audit management, data collection and analysis, quality, and internal controls.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65899 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

• Manage and oversee quality audits by plan and ensure quality audits findings and recommendations are rectified and implemented. Apprise management of quality audit findings and corrective actions taken.
• Ensure that the procedures and processes prescribed by the Quality Management System are in place and implemented per requirement.
• Review the Quality Management System periodically to assess continued suitability and areas of possible improvement.
• Ensure that ISO13485 and FDA 21 CFR Part 820 systems are adequately maintained, and continuous improvements are implemented.
• Co-ordinate with various functions to ensure awareness and understanding of the Quality Management System. Plan and co-ordinate gap analysis exercises and provide advice on bridging the gap.
• Arrange for ISO13485, ISO14971 and FDA 21 CFR Part 820 awareness training and further refresher training as needed.
• Co-ordinate and plan work of external audit such as Customer, ISO certification and Regulatory bodies.
• Ensure that systems and procedures are in compliance with ISO13485, ISO14971, FDA 21CFR Part 820, and GDP requirements.
• Mentor / supervise as assigned and ensure timely and accurate completion of quality projects.
• Support Plant wide audit/ inspection activities and special projects, as assigned.
• Able to travel for suppliers / customer visits.

Job Requirements:

• Degree with 3 years of working experience in Quality Management System, and in manufacturing environment.
• Excellent hands on knowledge of Quality Management System primarily in ISO 13485 and FDA 21 CFR Part 820.
• Lead, mentor and facilitate problem solving and quality improvements.
• Establish controls system required in ISO13485 & FDA registered facility.
• Strong communication and interpersonal skills.
• FDA Inspection experience preferred.

Interested applicants, please email us your resume to [email protected]

E-Ployment Consultancy

EA License No: 09C0884

EAP Name/ Registered No: Ivan Mah/ R1108310

1. Responsible for collecting, receiving, technical support and quality improvement of product problems;
2. Responsible for statistical analysis of product after-sales data, identification of batch risks and improvement of parts that need to be optimized;
3. Responsible for Initial Quality Survey (IQS) data analysis;
4. Responsible for organizing overseas after-sales problem research.

Requirement：

1. Strong communication and ability to work within cross-functional teams, including internal and external partners.

2. Fluent in Mandarin and English.

3. Strong knowledge of Statistical Process Control (SPC) and/or Design of Experiments (DOE) principles.

4. Capable of adapting to changing priorities and responsibilities flexibly to support business needs.

5.Minimum Bachelor's degree in Materials Science, Engineering, Electrical Engineering,

Embark on a transformative journey with a distinguished financial institution as the

• MNC, attractive remuneration package
• Salary up to $8000, AWS, bonuses, Dental, medical
• Leadership skills
  North-East, 5 days work week
• Career advancement

Job responsibilities:

• Provide on-site product & system commissioning/servicing support.
• Support on product and application presentation to new and existing customers.
• Project/systems configuration and coordination, new product launch.
• Assist in distribution channels-technical related.
• Brain storming of ideas to support on special projects.
• Providing technical support to sales team.
• Handling complaints on technical issues and support marketing activities.

Requirements:

• Possess a Degree or Diploma in Engineering (with relevant experience).
• Knowledge of water treatment, hygienic and steam, food and beverage, pharmaceutical, semi-conductor industries is an added advantage.
• Minimum 8 to 10 years’ experience in Industrial/Technical products, particularly valves, sensors and process control instrument.
• Strong leadership skills and able to lead a team.
• A hands-on person.
• Able to communicate with customers on building solutions.
• Strong communication skills, Dynamic and goal-oriented, team player.
• Computer and PLC literate, proficient in MS Excel, Word, Powerpoint
• Knowledge of Adobe Photoshop/InDesign will be an added advantage.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

One North Consulting is actively hiring Senior Software Testers - Singapore Citizens/PRs with 4+ years of experience.

Interested Singapore Citizens / Singapore Permanent Residents can connect on email id - [email protected]

In this role, you will work to assure quality of software products.

As part of this role, you will report to the Quality Assurance Manager; and work closely with business units and other IT teams to deliver quality assurance and testing deliverables.

Description

• Translate business requirements into complete test scenarios, conditions and expected results for user acceptance testing.
• Accountable for the execution of User Acceptance Testing and results are updated with proper documentation.
• Tracks the outstanding defects and work with delivery team in resolving the tickets promptly and within the agreed timeline.
• Proactively make continuous improvement to test coverage and execution
• Actively participate in scrum activities and meeting discussion, for example sprint planning, daily standup and retrospective
• Prepare testing status report and work closely with business users
• Support the prompt delivery and implementation of strategic initiatives.

Competencies & Personal Traits

• 4+ years in Software Testing.
• Functional Testing, UAT, SIT, FrontEnd Testing, UI Testing, Web Application testing, Mobile Testing
• Banking/insurance industry experience.
• Experience with automation test is a plus
• Experience with front-end application testing is a plus.
• Experience with tools like JIRA, Confluence
• Exposure to Waterfall and Agile testing process

If interested please email us your CV to [email protected]

Our client is a leading organisation specialised in developing Semiconductor machines and Machine Vision. One of their divisions currently has opening for Software Engineer.

Responsibilities:

• Software Development - Design and develop control software for automated semiconductor equipment
• Continuous improvements on existing and new products
• Support fieldwork to upgrade and resolve customer issues

Requirements:

• Degree/Masters in Electrical & Electronics Engineering/Computer Studies or equivalent
• 1 - 5 years experience in developing software.
• Good experience in either C or C++
• Good knowledge in developing multi-threaded control software
• Hardware experience in using servo, stepper motion controller, analog device and high speed I/O. Experience in Machine Vision is an added advantage.

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

[email protected]

Joey

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743 | EA Reg No: R1103523

www.rightrecruit.com.sg

Our client is from Oil and Gas industry. They are looking for a C & I Engineer to assist their team for the next phase of their business. They are located in West.

Duties:

• Responsible for Yokogawa DCIS, SIS, and FGS support to ensure safe operations.
• Installation, troubleshooting, and maintenance of automation systems.
• Manage vendor contracts and provide technical training.
• Develop and maintain maintenance procedures and documentation.
• Execute projects related to automation and plan for system lifecycle.
• Lead Cyber Security compliance and conduct risk assessments.
• Offer expertise in OT cyber-security projects.

Requirements:

• Min Degree in Computer, Electrical Engineering or any relevant field.
• Min 4 years of working experience in Oil and Gas and utilities or any relevant industry.
• Experience in ISO27001 and IEC61508 will be anadvantange.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115873 (New Jirn Tone)