Job Description:

• Responsible for product quality assurance.
• Completes all administrative activities associated with quality inspection.
• Performs process audits and assists manufacturing with the interpretation of the quality and workmanship standards.
• Downloads quality information from quality system to be used for Quality reports.
• Plans and directs activities concerned with the establishment and/or continuance of process related requirements and other quality programs.
• Prepares quality documentation or equivalent.
• Prepares Statistical Process Control Charts where required.
• Responsible for authorizing the released of final products to customer.
• Supervises inspectors or technicians on the inspection plan.
• Directs inspectors or technicians engaged in measuring, inspecting and/or testing products or parts and tabulating data.
• concerning materials, product or process quality and reliability.
• Contributes to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering
• to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets
• through participation of EHS programs.
• Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Job Requirements :

• Diploma / ITC / NTC in Mechatronics/ Electrical & Electronics engineering or related discipline, preferably with 2 years in manufacturing environment.
• Proficiency in written and communication skills in English.
• Practical computer skills and knowledge with hands-on ability.
• Familiarity with inspection equipment, statistical tools, Geometric Dimension and Tolerance knowledge will be an advantage
• Able to use microscope for inspection and verification.

Our client is a global leader in gateway services, who is seeking to recruit a Trainee Air Hub Lead - Load Control (Location: East). This position is based in Singapore.

Trainee Air Hub Lead - Load Control (Location: East)

Responsibilities:

You will perform Weight & Balance responsibilities for departing flights from Changi International Airport as well as departing flights from other international airports around the globe. Your essential roles are to ensure that the structural weights of an aircraft are within its safety parameters and that each departing flight is in "trim" and balanced within the centre of gravity. You will also be responsible for the completion of the Loadsheet and its related Weight and Balance documentation in accordance to IATA rules and regulations, handling pre-load calculations, load distribution and planning, timely issuance of loading instructions, and timely presentation of loadsheets to pilots before flight departures.

Requirements:

• Diploma in any discipline

• Able to read, write and communicate in English

• Comfortable with shift work

Others:

• Work Week & Shift: 6 days, rotating shift

• Staff transport will be provided for candidates working beyond midnight.

JJ Consulting Services

EA Licence No.: 12C6207

Applicants are invited to send in a MS Word resume to [email protected] stating position applying for/present/expected salaries and earliest available date.

We thank all applicants in advance and regret that only short listed candidates will be notified.

• Electrical Supply (MNC company)
• Basic $3000 - $3500
• *AWS + Bonus + 14 days AL
• Mon-Fri (8.15am-5.45pm)
• Working location: Tuas
• Company transport provided: CCK, Bukit Batok, Boon Lay

Responsibilities

• Inspect and test incoming and outgoing parts according to established procedures and maintain quality records.
• Report quality issues to the QA Manager and relevant department heads, ensuring non-conforming products are separated.
• Authorize the rejection of unsatisfactory parts and approve the release of conforming parts for delivery.
• Perform routine factory tests on switchboards and oversee testing and commissioning on-site or aboard vessels.
• Assist in achieving quality objectives, recommend solutions for issues, and verify their implementation.
• Ensure safety compliance, proper calibration of instruments, and maintain good housekeeping in the QA Department.

Requirements

• Min ITE/ Diploma in Electrical Engineering

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Key Roles & Responsibilities

The Snr Executive / Asst Manager will support the Vice President (Systems and Quality Assurance) in implementing and managing the Company's Excel QA framework, School Management Model (SMM) Knowledge Repository, EduTrust compliance and data protection across the organisation.

Company's Framework & SMM Knowledge Repository

1. Assist in the development, management, and implementation of the SingEdExcel framework across schools.

2. Support the Vice President in monitoring, reviewing, and evaluating the effectiveness of the framework and the knowledge repository.

3. Coordinate with school leaders and staff to ensure effective adoption and implementation of standardised policies and procedures.

4. Maintain documentation of all policies and procedures, ensuring they are up-to-date and accessible in the knowledge repository.

5. Assist in organising professional learning sessions for school leaders on the SingEdExcel framework and SMM Knowledge Repository.

EduTrust Compliance & Support

1. Support the Vice President in serving as an internal assessor for schools preparing for EduTrust certification.

2. Assist in reviewing EduTrust-related documents.

3. Coordinate and manage documentation and evidence gathering for the EduTrust certification renewal exercise.

Data Protection Compliance

1. Assist in the development and implementation of data protection policies and procedures.

2. Support in conducting data protection risk assessments and audits across all schools.

3. Monitor compliance with data protection laws and regulations and report findings to the Group DPO.

4. Coordinate data protection training and awareness programmes for staff.

5. Maintain comprehensive records of data processing activities and assist in the preparation of reports on data protection compliance.

Job Specification

• Recognised bachelor’s degree in Education, Business Administration, Quality Management, or a related field.

• Minimum of 3 years of experience in quality assurance, compliance management, or a related field.

• Minimum of 1 year of experience with data protection and privacy laws, and their implementation in organisational processes.

• Knowledge of quality/compliance management systems and frameworks (e.g., EduTrust, ISO 21001) is essential.

• Experience with quality improvement initiatives and system implementation is highly regarded.

• Strong analytical skills and attention to detail, with an aptitude for data review and analysis.

• Prior experience in the education industry is preferred.

• Proficiency in Micros

Profile of Competency

• Excellent communication skills.

• Ability to work independently and as part of a team.

• Ability to manage multiple projects simultaneously.

• Ability to work under pressure and meet deadlines.

• Commitment to continuous improvement.

• Passion for education and school improvement.

• Understanding of local and regional data protection laws and best practices.

• Ability to manage and implement data protection projects within set timelines and budgets.

• Commitment to maintaining the highest levels of integrity and confidentiality.

Other Professional Qualifications

• Completion of relevant training programmes in data protection and/or privacy laws.

• Any additional certifications in quality management or project management will be beneficial.

Industry: Education / International schools

Working hours: 8.30am to 5.30pm / Mon-Fri

Jessie Hoe Huey Miin

CEI R1103861

EA: 99C4599

Job Description

• Understand and upkeep the SOP of cleaning operation
• Record and report Issues to Resident Manager and Operation team
• Identify service gap and inform the Resident Manager and Operation team
• Support Process Improvements
• Identify scope for retraining
• Investigating customer complaints regarding service gap

Job specification

• Min Diploma holder & above. Fresh graduate is welcome to apply
• Bilingual preferred
• MS Excel, Word & Powerpoint skill ready

Job description

Our Office Location : 2 Seraya Place, Jurong Island, Spore 627857

1 Responsibilities

• Establish, develop, update and maintain the QEMS system and work with respective stakeholders to develop and revise procedures (ISO 9001:2015).
• Monitor & analyze trends and quality performance.
• Manage the certification and audit of the Company ISO (ISO 9001:2015 internal and external audits) to ensure all ISO 9001 and relevant certifications’ objectives and requirements are met.
• Manage and ensure internal and external audit comply to QEMS requirement. This includes maintaining accurate records and coordination of initiatives improving QEMS.
• Effectively communicate the QA strategies, processes, and needs across organization through quality programs and campaigns.
• Participate in customer audit, lead investigations of quality issue with customers and internal stakeholders and follow up the CAPA action items to resolve all customer feedbacks / complaints.
• Inculcate and promote a culture to deliver high standard of quality in services rendered to customers.
• Responsible for managing Supplier / Vendor management on-boarding, improvements based on non-conformities, supplier audits and KPI’s.
• Support internal stakeholders on Management of Change.
• Liaise, fulfill, monitor and update customer on their KPI and other requirements.
• Responsible for monthly quality management review meeting and other quality performance reports where required by Management.
• Inspect Warehouse, Drumming including Transport & Yard areas and processes to ensure compliance with quality standards.
• Conduct training on ISO 9001 requirements, quality awareness and quality related issues.
• Contribute to any other projects assigned by the Line Manager.

2 Requirements

• Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• ISO 9001:2015 lead or internal auditor certificate from accredited institution would be an advantage
• Minimum 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.
• Demonstrate strong leadership skills with at least 3-5 years’ experience in leading a quality team.
• Experienced in improving, maintaining and drives implementation and compliance of ISO 9001 management system would be an advantage.
• Experienced in customer / supplier quality management would be an advantage.
• Positive can-do attitude and self-initiated with strong sense of job ownership.
• Innovative problem-solver and believes in continuous improvement.

Salary: up to $2400 + 400 transport allowance

Duration: 1 year contract

Working Days & Hours: five day week. 2 weeks of Morning followed by 1 week of afternoon

Location: Tuas - bus pickups - Jurong East, Outram, CCK, Woodlands

Job Description:

Monitor Product Quality Compliance

Perform routine and non-standard tests on materials, products and other Quality Control purposes using HPLC, GC, Empower system etc

• Identify OOS, deviations and quality problems

• Report testing activities and results

• Comply with Quality and HSE procedures when carrying out sampling and QC tests

Manage Laboratory Operations

• Follow the organization’s operational excellence model for laboratory work

• Perform routine calibration and maintenance of laboratory equipment

• Report equipment OOS issues and equipment purchase requests

• Maintain integrity, accuracy and completeness of QC data and records

Optimise quality and efficiency of department workflows and activities

• Assist in preparing and participate for laboratory inspections and audits

• Compile data to support business and performance metrics reporting

• Propose solutions to improve QC procedures, activities and workflows

• Gather information to support feasibility assessments of introducing new QC procedures, systems and equipment

Job Requirements: Min Diploma in Chemistry / Sciences or similar

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

As a Customer Service Officer, you act as the first point of contact for customers to resolve or escalate issues for resolution. You also perform administrative support to ensure smooth delivery of operations.

Roles and Responsibilities

· Attend to customer enquiries, feedback and complaints via phone, email or in-person.

· Check and monitor CCTVs for discrepancies, system issues and incidents.

· Obtain and evaluate all relevant information to escalate car park cases to the Operations or Technical teams.

· Monitor incident queues and work with operational teams to ensure escalated cases are resolved within the required service levels and customer requirements.

· Perform investigations and process refunds for customers.

· Perform administrative tasks related to customers data such as service reports etc.

· Monitor and track manpower deployment for Operations and Technical teams.

Requirements

· At least GCE ‘O’ Levels or equivalent.

· At least 2 years of working experience in the customer service or call centre roles.

· Required to work rotating shifts due to 24/7 operations of control centre.

· Excellent customer service and communication skills.

Proficient in Microsoft Office tools (Excel and Word).

Administered by the Workforce Advancement Federation (WAF), the Career Conversion Programme (CCP) for Biomedical Manufacturing Executives is a premier talent development initiative designed to cultivate the next generation of skilled professionals for Singapore’s Biomedical manufacturing industry. This comprehensive 15-month programme features structured on-the-job training (OJT) provided at Novartis Singapore Pharmaceutical Manufacturing Pte Ltd (NSPM), facilitating the practical application of acquired knowledge and ensuring participants develop the essential competencies required for their roles.

Eligilibity for CCP:

• Singapore Citizen or Permanent Resident;

• Minimum 21 years old;

• Mid-Career Individual: Graduated, or completed National Service, whichever is later, for at least 2 years* prior at the point of application; or

• Fresh Graduate: Graduated, or completed National Service, whichever is later;

• Not in a similar job function prior to joining Career Conversion Programme (CCP);

• Have not attended the same programme – Career Conversion Programme (CCP) for Biomedical Manufacturing Executives / Professionals (Train-and-Place with Commitment to hire) – previously;

• Have not been funded under the same programme – Career Conversion Programme (CCP) for Biomedical Manufacturing Executives / Professionals (Train-and-Place with Commitment to hire) – previously.

• Should not be shareholders, immediate ex-employees of Novartis, or be related to shareholders of Novartis.

Successful candidates must be able to commence the program by March 2025.

Job Purpose

Support all activities in maintaining a QC IPCDS lab in BioPharmOps QC. Testing of in-process control & drug substance samples, to support production needs and document in accordance with written testing SOP’s and in accordance with local/ international regulations.

Key Responsibilities

• Maintain QC IPCDS laboratory in full cGMP-compliance.

• Track and execute individual training requirements to ensure completion on time including new methods and instrumentation.

• Ensure laboratory operations are in accordance to cGMP standards

• Perform raw material testing in accordance current testing monographs/SOPs and in accordance with local/ international regulations.

• Ensures that testing completed in a timely manner based on plan.

• Support laboratory routine operations such as inventory management and house-keepings.

• Support the optimization of work flows in the QC IPCDS Laboratory.

Requirements

• Minimum Diploma with 4 to 5 years relevant working experience in GMP-regulated industries in Quality Control. Fresh graduates are welcome to apply.

• New entrants to biopharmaceutical industry and should not be holding a bond obligation with any organisation

• Background knowledge on analysis such as HPLC, UV Spectrophotometer, pH/Conductivity meter, Total Organic Carbon (TOC),

• Preferrably a working knowledge of FDA and ex-USA regulatory requirements as well as industry quality management tools, standard, and quality systems.

Administered by the Workforce Advancement Federation (WAF), the Career Conversion Programme (CCP) for Biomedical Manufacturing Executives is a premier talent development initiative designed to cultivate the next generation of skilled professionals for Singapore’s Biomedical manufacturing industry. This comprehensive 15-month programme features structured on-the-job training (OJT) provided at Novartis Singapore Pharmaceutical Manufacturing Pte Ltd (NSPM), facilitating the practical application of acquired knowledge and ensuring participants develop the essential competencies required for their roles.

Eligilibity for CCP:

• Singapore Citizen or Permanent Resident;

• Minimum 21 years old;

• Mid-Career Individual: Graduated, or completed National Service, whichever is later, for at least 2 years* prior at the point of application; or

• Fresh Graduate: Graduated, or completed National Service, whichever is later;

• Not in a similar job function prior to joining Career Conversion Programme (CCP);

• Have not attended the same programme – Career Conversion Programme (CCP) for Biomedical Manufacturing Executives / Professionals (Train-and-Place with Commitment to hire) – previously;

• Have not been funded under the same programme – Career Conversion Programme (CCP) for Biomedical Manufacturing Executives / Professionals (Train-and-Place with Commitment to hire) – previously.

• Should not be shareholders, immediate ex-employees of Novartis, or be related to shareholders of Novartis.

Successful candidates must be able to commence the program by March 2025.

Job Purpose

Support all activities in maintaining a QC Raw Materials release lab in BioPharmOps QC. Testing of incoming raw materials and consumables, to support production needs and document in accordance with written testing SOP’s and in accordance with local/ international regulations.

Key Responsibilities

• Maintain QC Raw Materials laboratory in full cGMP-compliance.

• Track and execute individual training requirements to ensure completion on time including new methods and instrumentation.

• Ensure laboratory operations are in accordance to cGMP standards

• Perform raw material testing in accordance current testing monographs and in accordance with local/ international regulations as such as United States Pharmacopoeia (USP), European Pharmacopoeia (EP), American Chemical Society (ACS) and/ or Internal Validated Methods.

• Ensures that testing completed in a timely manner based on plan.

• Support laboratory routine operations such as inventory management and house-keepings.

• Support the optimization of work flows in the QC Raw Material Laboratory.

Requirements

• Minimum Diploma with 4 to 5 years relevant working experience in GMP-regulated industries in Quality Control. Fresh graduates are welcome to apply.

• New entrants to biopharmaceutical industry and should not be holding a bond obligation with any organisation

• Background knowledge on analysis of USP and EP pharmacopeia methods in GMP-regulated industries in Quality Control Raw Materials laboratory.

• Preferably a working knowledge of FDA and ex-USA regulatory requirements as well as industry quality management tools, standard, and quality systems.

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

• MNC Company
• Basic $2500 - $3200 + Allowance + AWS + VB + Excellent Benefits
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8.30am to 5.15pm
• Jurong Island. Company Transport provided
• Training provided for those without/lesser experience

Job Responsibilities:

• To perform routine analysis of polymer testing & wet chemistry analysis
• To ensure that tests assigned are performed in a timely manner in accordance with validated test protocols and procedures
• To perform instruments’ calibrations, maintenance, and troubleshooting
• To perform housekeeping and maintain the cleanliness in the laboratory
• To perform inventory check & improvement idea in the lab
• To assist superiors with non – routine study samples and any other tasks assigned

Requirements:

• Diploma in Chemical Process Technology / Chemical Engineering
• Willing to work overtime when required

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $5500 - $6500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm

Job Responsibilities:

• Conduct assessment and review on supplier qualification, performance and process capability
• Ensure supplier quality issues are deal with, analysed, improved and follow through
• Collect, handle and follow-up on customer feedback/complaints
• Support internal, external and customer audits
• Evaluation, verification and validation of new parts/samples
• Establish and maintain inspection criteria for incoming, in-process and final products
• Identify quality issues, NCR, CAPA handling and drive continuous improvement
• Authorize the release (COC) of products, COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in relevant subject area with 3 years’ experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

Authorities and Responsibilities

1. Responsible for providing directives for the Quality Assurance Department in meeting management objectives.
2. Formulate, implement and evaluate quality strategies programs for the company.
3. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with auditors, customers, production and suppliers to meet the quality requirements.
7. Manage sub-contractors for on-time supply of treatment process, as well as meeting technical requirement.
8. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
9. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
10. Review and approve disposition program / action for nonconforming products.
11. Ensure that processes needed for the quality management system are established and implemented.
12. Report to top management on the performance of the quality management system, and note needed improvements.
13. Ensure the promotion of awareness of statutory, regulatory and customer requirements throughout the organization.
14. Ensure and coordinate the implementation of risk assessment and risk control of medical devices

The Quality Assurance Manager plays a crucial role in business by ensuring that products meet certain standards of quality. He/She plans, directs or coordinates quality assurance programs and formulate quality control policies. He/She also works to improve an organisation's efficiency and profitability by reducing waste. He/She prepares and update quality documentation, basing their processes on a recognised standard such as ISO 9000 – Quality Management, published by the International Organisation for Standardisation. He/She supervises teams of inspectors who carry out the detailed assessment of products and their components at different stages of production. He/She recruits and trains supervisors, and provides them with documented quality standards as guidelines for their daily work. He/She also selects quality inspection tools and software to support the inspection team.

Competence Requirements:

• Diploma in Mechanical Engineering / Quality Engineering or equivalent.
• Minimum 6 years of solid experience in Quality Management in similar or related industry and 3 years in management level.
• Good knowledge in implementing and up keeping Quality Management System.
• Strong leadership and good interpersonal skills.
• A team player with strong sense of responsibility to ensure plant effective quality performance.

~ Assist in the implementation of company quality systems.
~ Conduct Quality Assurance audit.
~ Manage cause investigation for non-conformance.
~ Manage company quality systems.
~ Manage departmental activities and deployment.
~ Able to commute between Tuas Plant and Loyang Plant.

Job Description

• To perform visual and dimensional inspections of products.
• Prepare of QC reports.
• Able to use basic measuring equipment/instrument such as Vernier Caliper, Micrometer, Thread Gauge, Pin Gauge.
• Required to work rotating night shift with night shift allowance provided

Pre-Requisites

• Min NTC / GCE ‘O’ Level / GCE ‘N’ Level
• Entry level candidates are welcome to apply.
• Able to interpret basic mechanical drawing.
• Proficient with Microsoft Excel.
• Ability to work independently or as part of a team.
• Able to communicate in simple English.
• 5.5 work day work week with overtime provided

The Opportunity

• Opportunity to work in German MNC within the Chemical Industry
• 12 Hour Shift
• Location: West (Tuas West Road)
• Training provided
• Completion bonus!

Job Scope

• Apply Quality Control Procedure to conduct lab analysis
• Responsible for instrument preparation, maintenance and general lab housekeeping
• Support production during night shift, weekend and public holidays
• Assist supervisor to set up new analysis method following quality control procedure
• Review all the test result records with Product Assurance Plan (PAP) updates, ensure all of data are generated properly under SOPs and transfer to SAP
• Determine the quality according to the agreed specification or PAP, report to manager or relevant department
• Work following ISO 9001: 2015 standard requirements

Requirements

• Minimum ITE or Diploma in chemistry, biochemistry or pharmaceutical analysis etc
• Candidates without relevant experience are or with extended QC lab working experiences are welcome to apply.
• Familiar with gas Chromatography (GC), High-performance Liquid Chromatography (HPLC), Total Organic Carbon (TOC), Fourier Transform Near-Infrared (FT-NIR), Particle sizer etc.
• Work as team player

Next Step

• Prepare your updated resume
• Simply click on 'Apply here' or email to [email protected] to drop your resume
• All shortlisted candidates will be contacted.

Edmond Lee
Direct Line: 8206 8857
EA License No: 91C2918
Personnel Registration Number: R23114813

Product Executive (QA/UAT)

Location: Midview

Salary: Up to $3,800

Testing & Quality Assurance (Information & Communication Technology)

We are seeking a skilled individual with experience in User Acceptance Testing (UAT) and Quality Assurance (QA) to enhance the stability and reliability of our application. This role involves being the primary point of contact for identifying and verifying bugs and issues, effectively communicating with the development team to address these concerns and conducting thorough UAT before each app release. The ideal candidate will possess a keen eye for detail, strong problem-solving abilities, and the capacity to work collaboratively with technical teams to ensure the highest quality of our software products. This is an opportunity to play a pivotal role in maintaining and improving our app's performance, directly impacting user experience and satisfaction.

Responsibilities:

Candidates will be responsible for performing functional front-end testing across iOS apps, Android apps, and web platforms. The goal is to ensure products meet the highest standards of quality and reliability, with a focus on testing user interfaces, workflows, and responsiveness to maintain cross-platform consistency and adherence to specifications.

The role involves developing and documenting detailed test plans and test cases that align with business requirements and user stories. Candidates should be proficient in executing these plans efficiently, optimizing test coverage, and identifying key areas for focused testing.

Candidates will conduct thorough regression testing to ensure new features and bug fixes do not affect existing functionality. This requires proactively identifying potential risks and collaborating with internal teams to prioritize and resolve issues.

Strong attention to detail is essential for identifying UI/UX inconsistencies and technical bugs. Candidates should possess excellent problem-solving skills to investigate and pinpoint technical issues effectively.

Candidates will document bugs in issue tracking systems (such as Jira), writing clear and concise reports, and ensuring timely communication with both technical and non-technical stakeholders. They will be responsible for following up on issues until they are resolved and validating the fixes.

Excellent communication skills are required to bridge the gap between technical and non-technical teams. Candidates must ensure critical information is relayed clearly and promptly, facilitating decision-making during product releases and major updates. Strong interpersonal skills are necessary to work in a collaborative environment and manage competing priorities.

Candidates are expected to contribute to the continuous improvement of internal QA processes by identifying areas for efficiency gains and implementing best practices in testing and documentation.

Finally, candidates should become proficient in all internal tools and stay up to date with evolving product features. They will also be responsible for creating training materials and documentation to support team knowledge sharing.

Qualifications and Requirements:

• Bachelor's degree in a relevant field, such as Computer Science, Product Management, or a related discipline.
• Proven experience in quality assurance and testing of mobile applications, with a strong grasp of QA methodologies and tools.
• Experience working in Agile/Scrum or DevOps environments.
• Experience with software testing tools, such as Jira.
• Solid experience in defining product specifications, user stories, and acceptance criteria.
• Exceptional communication skills to collaborate effectively with cross-functional teams, including developers and designers.
• Proficient in both written and spoken English
• Strong problem-solving abilities and the capacity to identify, analyze, and communicate technical issues.
• Detail-oriented with a dedication to delivering high-quality products to our users.
• Excellent organizational skills to manage multiple tasks and projects concurrently.

Interested applicants may apply, alternatively you may send in your CV to bexlyn.chiu[at]revup-proservices.com

Bexlyn Chiu

R1985241

EA 24C2366

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyse and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines
• Min 3 years experience in exploratory testing and regression test automation
• Strong analytical skills
• Meticulous attention to details
• Good interpersonal skills
• Experience in agile development environment
• Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter)
• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

Job Profile Summary:

The Wealth Protection Specialist will assist bank partner in growing the bancassurance space. You will collaborate closely with bank stakeholders to deliver customer centric recommendations focusing on health and protection needs of the bank customers and build strong and long-term customer relationships.

Job Description:

• Establish and define the customer’s protection needs
• Analyze customer financial situations to identify opportunities for recommendations and mitigate risks
• Foster and enhance relationships with customers, with focus on Health & Protection products to complement the customers' existing protection portfolio.
• Liaise with internal departments on policy fulfilment
• Achieve channel bancassurance targets in partnership segments through telemarketing and referrals

Who we are looking for:

Competencies & Personal Traits

• Exhibit ability to deliver effective communication and excellent interpersonal skills
• Able to multi-task and meet tight deadlines
• Good presentation and negotiating skills
• Strong stakeholder management skills in influencing and persuasion
• Dynamic individual who strives in fast moving environment

Working Experience:

• 2 years of relevant experience in bancassurance or telemarketing
• Possess CFMAS, M9, M9A, M5, and HI certifications

Education:

• Degree/Diploma in Business or related fields of study

Language:

• English

Responsibilities:

• Provide support in both AP & AR functions
• Prepare sales invoices and reports
• Prepare outgoing payments through internet banking and manual check payments
• Prepare and maintain accounting documents and records
• Assist in daily administrative works
• Any ad-hoc duties as assigned

Requirements:

• Diploma in Accounting or equivalent
• Good knowledge of accounting and bookkeeping
• Relevant accounting experiences preferred
• Proficient in MS Office
• Organized and Meticulous
• Team player with positive working attitude

Roles & Responsibilities

• Provide technical advice and support for daily operational issues.
• Perform inspections of welding, structural fabrication, and piping systems to ensure compliance with industry standards.
• Review piping isometric drawings and verify that materials meet specifications.
• Coordinate and oversee NDT activities, including radiographic testing (RT), and ensure accurate results through proper witnessing and review.
• Conduct thorough inspections and assessments during plant shutdowns, documenting findings and reporting discrepancies.
• Assist in the development and implementation of quality control procedures.
• Participate in safety meetings and ensure compliance with health and safety regulations.
• Maintain accurate and organized records of inspections, reports, and certifications.
• Collaborate with engineering and construction teams to ensure design specifications are met.

Qualifications:

• Minimum of 3 years of experience in plant inspections or related fields, especially during shutdowns.
• Valid certification in at least one API area (API 510, API 570, or API 653).
• Knowledge and experience in welding inspection, structural fabrication, and piping materials.
• Proficient in MS Office and CAD/CAM software.
• Familiarity with industry standards and codes (e.g., ASME, ASTM).
• Experience with non-destructive testing methods (UT, PT, MT, VT) is a plus.
• Strong communication skills, both written and verbal, for effective collaboration with team members and clients.
• Ability to work in a fast-paced environment and manage multiple priorities.

Job responsibilities:

• Spray, fog, bait and trap to control pests.
• Control roaches, ants, rodents, birds, termites, etc.
• Inspect property, determine problem and implement the most effective solution.
• Receive work orders and work requests, determine nature of the problem and undertake
• necessary actions.
• Ensure safety of clients and their respective customers while performing duties.
• Operate spraying equipment, bait gun, power fogger and various power and hand tools
• in performance of duties.
• Comply to workplace safety regulation while executing the duties and maintenance of
• the equipment and vehicle
• Perform other related work as instructed by reporting officer

Job Requirements

• Ability to work in a team
• Attention to detail and accuracy
• Communicate well with customers to build strong customer relationship
• Ability to manage time and complete all delegated tasks efficiently
• Excellent knowledge of Singapore road with good driving record
• NEA Technician License ( those with no license and experience may also apply)
• Min NITEC
• Class 3 Driving License (preferred but not a requirement)
• 12 hours rotating shift
• $2,200 - $2,800

Join one of the fastest growing regional banks in Singapore as a Head of compliance responsible for their Private Banking and Wealth business. This highly visible role will report to the Chief Compliance, legal and Risk and will give the opportunity for the right individual to take on the succession in the near future.

The head of compliance will be polished and articulate leader capable of leading a team of at least 10 people covering all aspects of FCC, onboarding and trade monitoring dealing with the MAS and facilitating business growth from a compliance perspective.

Requirements:

• Minimum 15 years of experience post-qualification is a must
• At least 5 Experience working as a compliance officer in a Private Bank or Wealth division within a Bank
• A commercially driven individual capable of working with the business to support growth is a must
• Ability to articulate cases on behalf of the business to the MAS
• Polished and credible individual
• Strong written and oral communication skills
• Preferred Chinese speaker as a large portion of the Bank AUM comes from China HNW Individuals

Company Reg No.: 201131609D | License No.: 24S2411 | Reg No: R1110891

The Supplier Quality Engineer will be based in Changi South.

Job Responsibilities

• Attend day to day part quality issues / MRB reviews.
• Serve as the primary point of contact for all supplier-related quality issues.
• Cross-Functional Collaboration: Collaborating with internal teams, such as Engineering, Procurement / Buyer, Planner, Operation, Logistic to address any supplier-related quality issues.
• Collaborating with suppliers to identify root causes of quality issues and implementing effective corrective and preventive actions. Review CAPA effectiveness, ensure no repeating occurrence.
• Work with IQC team in reviewing incoming parts from suppliers with no defects and ensure quality.
• Facilitate effective communication and collaboration between suppliers and internal stakeholders as well as customers.
• Seek for Continuous Improvement with suppliers.
• Identify opportunities for continuous improvement in supplier quality processes and systems.
• Lead initiatives to reduce defect rates and improve overall supplier performance.
• Collaborate with suppliers on process improvements and quality control enhancements.
• Support supplier audits to ensure compliance with quality standards and regulatory requirements.
• Support evaluation and approve new suppliers based on quality performance and capability assessments.
• Documentation: Maintaining accurate records, reports, and documentation related to supplier audits, evaluations, and inspections.
• Supports supply chain in the selection and qualification of suppliers’ parts being procured - FAI (First Article Inspection).
• Any ad-hoc duty as assigned by Superior.

Job Requirements

• Requires a Bachelor’s Degree in Engineering or related field with minimum 3-4 years of related experience.
• Requires experience in supplier quality engineering within the semiconductor manufacturing industry.
• Strong communication and interpersonal skills, with the ability to work effectively with suppliers, internal teams, and customers.
• Able to read blueprints and/or drawing standards.