· Create quality inspection plans and work instructions for incoming, In-process or outgoing parts to ensure that components and products conform to specifications.

· Define training plan, train QC supervisors, QC technicians and QC inspectors to perform dimensional/functional inspection in accordance to work instructions.

· Perform First Article Inspection for newly inducted materials and parts.

· Perform qualification validation of equipment, processes and test methods

· Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance requirements.

· Participate in Process Failure Mode Effect and Analysis team to mitigate product risk arising from manufacturing

· Perform complaint handling, investigate root cause of complaint and perform Corrective Action and Preventive Action as necessary.

· Handle non-conformances and perform disposition of rejected parts, trend yield and rejects, investigate root cause of non-conformance and perform Corrective Action and Preventive Action as necessary.

· Maintain the manufacturing environment and perform gowning as necessary when working in controlled manufacturing environment e.g. clean room.

· Initiate and/or execute engineering changes in compliance with Engineering Change Control procedures

· Participate in external and internal audit to ensure company quality system is effective

· Participate in continuous improvement programs such as 6S program, yield improvement projects etc.

· Support new production introduction as a team member representing quality

· Perform other tasks as assigned by the supervisor

· Work experience as a quality engineer in a medical device manufacturing environment

(Candidates with Diploma in Engineering. Science or equivalent can be considered for Assistant Quality Engineer position. Candidates with more experience can be considered for Senior Quality Engineer position)

· Experience with qualification validation of equipment, processes and test methods for new product introduction

Authorities and Responsibilities

1. Responsible for providing directives for the Quality Assurance Department in meeting management objectives.
2. Formulate, implement and evaluate quality strategies programs for the company.
3. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with auditors, customers, production and suppliers to meet the quality requirements.
7. Manage sub-contractors for on-time supply of treatment process, as well as meeting technical requirement.
8. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
9. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
10. Review and approve disposition program / action for nonconforming products.
11. Ensure that processes needed for the quality management system are established and implemented.
12. Report to top management on the performance of the quality management system, and note needed improvements.
13. Ensure the promotion of awareness of statutory, regulatory and customer requirements throughout the organization.
14. Ensure and coordinate the implementation of risk assessment and risk control of medical devices

The Quality Assurance Manager plays a crucial role in business by ensuring that products meet certain standards of quality. He/She plans, directs or coordinates quality assurance programs and formulate quality control policies. He/She also works to improve an organisation's efficiency and profitability by reducing waste. He/She prepares and update quality documentation, basing their processes on a recognised standard such as ISO 9000 – Quality Management, published by the International Organisation for Standardisation. He/She supervises teams of inspectors who carry out the detailed assessment of products and their components at different stages of production. He/She recruits and trains supervisors, and provides them with documented quality standards as guidelines for their daily work. He/She also selects quality inspection tools and software to support the inspection team.

Competence Requirements:

• Diploma in Mechanical Engineering / Quality Engineering or equivalent.
• Minimum 6 years of solid experience in Quality Management in similar or related industry and 3 years in management level.
• Good knowledge in implementing and up keeping Quality Management System.
• Strong leadership and good interpersonal skills.
• A team player with strong sense of responsibility to ensure plant effective quality performance.

~ Assist in the implementation of company quality systems.
~ Conduct Quality Assurance audit.
~ Manage cause investigation for non-conformance.
~ Manage company quality systems.
~ Manage departmental activities and deployment.
~ Able to commute between Tuas Plant and Loyang Plant.

Authorities and Responsibilities

1. Responsible for providing directives for the Quality Assurance Department in meeting management objectives.
2. Formulate, implement and evaluate quality strategies programs for the company.
3. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with auditors, customers, production and suppliers to meet the quality requirements.
7. Manage sub-contractors for on-time supply of treatment process, as well as meeting technical requirement.
8. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
9. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
10. Review and approve disposition program / action for nonconforming products.
11. Ensure that processes needed for the quality management system are established and implemented.
12. Report to top management on the performance of the quality management system, and note needed improvements.
13. Ensure the promotion of awareness of statutory, regulatory and customer requirements throughout the organization.
14. Ensure and coordinate the implementation of risk assessment and risk control of medical devices

The Quality Assurance Manager plays a crucial role in business by ensuring that products meet certain standards of quality. He/She plans, directs or coordinates quality assurance programs and formulate quality control policies. He/She also works to improve an organisation's efficiency and profitability by reducing waste. He/She prepares and update quality documentation, basing their processes on a recognised standard such as ISO 9000 – Quality Management, published by the International Organisation for Standardisation. He/She supervises teams of inspectors who carry out the detailed assessment of products and their components at different stages of production. He/She recruits and trains supervisors, and provides them with documented quality standards as guidelines for their daily work. He/She also selects quality inspection tools and software to support the inspection team.

Competence Requirements:

• Diploma in Mechanical Engineering / Quality Engineering or equivalent.
• Minimum 6 years of solid experience in Quality Management in similar or related industry and 3 years in management level.
• Good knowledge in implementing and up keeping Quality Management System.
• Strong leadership and good interpersonal skills.
• A team player with strong sense of responsibility to ensure plant effective quality performance.

~ Assist in the implementation of company quality systems.
~ Conduct Quality Assurance audit.
~ Manage cause investigation for non-conformance.
~ Manage company quality systems.
~ Manage departmental activities and deployment.
~ Able to commute between Tuas Plant and Loyang Plant.

ST Engineering is a global technology, defence and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. ST Engineering reported a revenue of over $10 billion in 2023 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Sustainability Asia Pacific Index.

About Commercial Aerospace business

ST Engineering’s Commercial Aerospace business is a world-class Original Equipment Manufacturer (OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With nearly 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely.

Job Duties of a Licensed Aircraft Engineer

• Day to day routine maintenance & rectification of aircraft defects
• Ensuring all work is carried out in accordance with approved maintenance data, company, authority and customers’ requirements
• Performing aircraft release to service certification (CRS) for maintenance and repair of aircraft according to the Company authorization issued by Quality Department
• Assisting in the forecasting of manpower, spares & equipment needs
• Ensuring that all staff under his control observes safety precautions, reporting of unsafe working condition & operation
• Assisting in the investigation of incident/accident reports and ensuring corrective actions are implemented
• Ensuring that tools & equipment under his control are properly maintained, calibrated and correctly used for the jobs
• Ensuring action is taken at all times to maintain the aircraft on schedule
• General supervision, control & discipline of staff under his charge
• Performing other duties, as and when required

Job Requirement

• Posseses relevant Licences from the Aviation Authority, with at least 5 years of relevant working experience
• Good communications and interpersonal skills
• Meticulous and organized
• Candidate with ICAO Annex I is welcome to apply

The Project Engineer is responsible for ensuring proper adoption of resource, quality and risk standards as well as managing project profit during the project lifecycle. He/She coordinates all administrative processes related to a project eg reports, claims, payment of invoices, including the final project handover documentation. He/She typically comes from an engineering industry/background and is able to identify and report project-related issues as well as suggests changes related to quality, risk and administrative processes.

He/She has good communication, customer management and negotiation skills for engaging with both internal and external parties to coordinate project activities between organisational departments and teams during the various phases of a project, as well as managing sub-contractors to ensure they are integrated into the project and adhering to technical requirements.

JOB DESCRIPTION

• Be responsible for the planning, scheduling, controlling and coordinating of building services related works in terms of preventive / breakdown / A&A Works
• To lead a team of supervisors & skilled workers to carry out their works accurately and timely and to ensure that works on site are carried out according to client requirement
• Liaise and hold meetings with clients, Managing Agent & Sub contractor to ensure that all requirements by clients and relevant authorities are adhered
• Monitor, track, and provide timely project progress reports to the management

JOB REQUIREMENTS

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Electrical/Electronic), project & facilities management, building services engineering, mechanical engineering or equivalent or equivalent.
• Diploma holders with relevant facilities management, M&E experience are also welcome to apply
• Good knowledge of M&E coordination
• Electrical and ACMV design capability would be an added advantage
• Committed, positive attitude & able to handle projects independently
• Good team player with ability to lead and multi-task
• At least 2 Year(s) of working experience in the related field is required for this position

ST Engineering is a global technology, defence and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. ST Engineering reported a revenue of over $10 billion in 2023 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Sustainability Asia Pacific Index.

About Commercial Aerospace business

ST Engineering’s Commercial Aerospace business is a world-class Original Equipment Manufacturer (OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With nearly 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely.

Job Duties of a Licensed Aircraft Engineer

• Day to day routine maintenance & rectification of aircraft defects
• Ensuring all work is carried out in accordance with approved maintenance data, company, authority and customers’ requirements
• Performing aircraft release to service certification (CRS) for maintenance and repair of aircraft according to the Company authorization issued by Quality Department
• Assisting in the forecasting of manpower, spares & equipment needs
• Ensuring that all staff under his control observes safety precautions, reporting of unsafe working condition & operation
• Assisting in the investigation of incident/accident reports and ensuring corrective actions are implemented
• Ensuring that tools & equipment under his control are properly maintained, calibrated and correctly used for the jobs
• Ensuring action is taken at all times to maintain the aircraft on schedule
• General supervision, control & discipline of staff under his charge
• Performing other duties, as and when required

Job Requirement

• Posseses relevant Licences from the Aviation Authority, with at least 3 years of relevant working experience
• Good communications and interpersonal skills
• Meticulous and organized
• Candidate with ICAO Annex I is welcome to apply

Applied Materials is the global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service manufacturing equipment for the semiconductor and display industries. Our innovations are at the foundation of the technology that transforms every part of our lives. We offer an exciting place to grow and learn alongside some of the best people you’ll ever meet. Join us to Make Possible a Better Future.

The Advanced Packaging Development Center (APDC) is a state-of-the-art cleanroom that is among the most advanced wafer-level packaging labs in the world. It houses the industry’s broadest portfolio of products that enable the foundational building blocks of heterogeneous integration, including advanced bump and micro-bump, fine-line redistribution layer (RDL), TSV and hybrid bonding. APDC was established as a joint lab partnership with the Institute of Microelectronics (IME), a research institute of Singapore’s Agency for Science, Technology and Research (A*STAR).

We are currently seeking for an experienced and passionate Process Engineer (R&D) to join APDC now. Apply now if you fit the description below!

Key Responsibilities

• Work closely with Process Integration, and the CTO USA team, hands on running wafers on semiconductor equipment using MES systems to run process operations.
• Design, create recipes, collect data, analyze and compile reports on moderately difficult process engineering experiments, within safety guidelines
• Perform hardware characterization on moderately difficult systems, within safety guidelines
• Troubleshoot moderately complex problems, perform Root Cause Analysis and resolve moderately difficult process engineering issues
• Measure film properties, organize data/reports for review and interpret data
• Generate internal documentation for products, presentations and technical reports
• Interact with customers to resolve moderately difficult process engineering issues/problems under general supervision
• Identify, select and work with vendors and suppliers under general supervision
• Implement new technology, products and analytical instrumentation

Requirements

• Relevant Engineering education qualification
• Research experiences focusing in semiconductor industry
• Past experiences in dealing with MES systems is a plus
• Stakeholder management
• Good communication and interpersonal skills

Work Location

• Science Park II

The Project Engineer is responsible for ensuring proper adoption of resource, quality and risk standards as well as managing project profit during the project lifecycle. He/She coordinates all administrative processes related to a project eg reports, claims, payment of invoices, including the final project handover documentation. He/She typically comes from an engineering industry/background and is able to identify and report project-related issues as well as suggests changes related to quality, risk and administrative processes.

He/She has good communication, customer management and negotiation skills for engaging with both internal and external parties to coordinate project activities between organisational departments and teams during the various phases of a project, as well as managing sub-contractors to ensure they are integrated into the project and adhering to technical requirements.

RESPONSIBILITIES

• Be responsible for the planning, scheduling, controlling and coordinating of building services related works in terms of preventive / breakdown / A&A Works
• To lead a team of supervisors & skilled workers to carry out their works accurately and timely and to ensure that works on site are carried out according to client requirements
• Liaise and hold meetings with clients, Managing Agent & Sub contractor to ensure that all requirements by clients and relevant authorities are adhered
• Monitor, track, and provide timely project progress reports to the management
• Good knowledge and experienced in building related works such as civil engineering, structural, architectural, building repair, carpentry, partition, A&A, renovation, plumbing works etc

JOB REQUIREMENTS

• Candidate must possess at least Diploma/ Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Building Services Engineering, Project and Facilities Management or equivalent.
• Diploma holders with relevant work experience are welcome to apply
• At least 3 Year(s) of working experience in facilities/ building maintenance industry.
• Preferably Executive specialized in Engineering - Civil/Construction/Building Services or equivalent
• Class 3 driving licence (Good to have)
• Must be self-driven & motivated to perform and deliver service excellence

We are looking for project engineer (building) based in Singapore office, if you are interested in becoming part of our SH family, please submit your resume and experience via the submit button below.

Our company is in need of Mechanical Engineer cum Procurement Officer for construction industry.

Criterias are:
1. Healthy
2. In-charge of workshop vehicle maintenance and repairs
3. Warehouse duties
4. Preparation of Delivery Orders (DO), Invoices and Quotations

Working Hours:

Mon-Sat: 8am to 6pm

WELCOME TO SITA

SITA is the leading specialist in air transport communications and information technology. We don’t just connect the global aviation industry, we apply decades of experience and expertise to address almost every core business, operational, baggage, and passenger process in air transport. As an organization, we cover 95% of all international air travel destinations and work with over 2,800 air transport and government customers in every corner of the globe. Immerse yourself in the dynamic world of technology while embracing our collaborative, and inclusive culture.

Ready to redefine air travel? The journey starts here, with you at SITA.

ABOUT THE ROLE & TEAM:

WHAT YOU WILL DO:

• Provide Service Operations support to internal and external customers in accordance with the terms of the customer contract and Service Level Agreements (SLAs)
• Ensure the correct functioning and maintenance of all internal and external systems and products serviced by Service Operations
• When required, act as the customer SPOC and coordinate the scheduling of intervention with Customer's, internal resolver groups, and the Service Desk ensuring the highest level of customer services and communications are maintained to resolve the fault and incident within the prescribed SLA.
• Carry out incident and problem management support to the highest standards and co-ordinate the resolution with the appropriate resolver groups
• Ensure shortest restoral times possible, initiating the timely escalations to specialized resolver groups inside and outside SITA, according to the customer contracts, SLAs and monitoring requirements
• To ensure the Service Operations team adheres to the highest working standards for all incidents and problems by providing guidance, support and direct management.
• Proactively detect problems related to service and infrastructure operations and delivery services, conduct diagnostics and provide service request ownership to ensure resolution of customer problems
• Support the senior team members in the management, reporting, and coordination of day-day tasks during the absence of the Lead Engineer
• Adhere to installation guidelines and industry best practices in order to deliver quality service and infrastructure operations
• Use the appropriate tools and equipment to perform the installation, intervention, and repairs in accordance with Service Operations and Delivery guidelines and instructions where provided
• Report and escalate to the next level those problems which cannot be fixed
• Carry out preventive and proactive maintenance of equipment and monitoring of systems and services in accordance with agreed schedules and customer expectations
• Perform Change Management, Configurations, Design and Implementation of the supported Product & Systems
• Manage local suppliers in the provision of services for the SITA Service Operations centres and report on services provided to management.
• Conducts the analysis, definition, documentation and testing of application & systems enhancements
• To provide onsite support to Users during the cutover of the services
• Continuously identify and document lessons learnt, known errors and operational knowledge for improved services
• When/where required, be contactable for escalations and support, on and on-call standby basis
• When/where required, perform assigned tasks on 12 x 7 shifts basis.

EXPERIENCE:

• Degree or equivalent Diploma / Certificate in Computer Science, Electronic Engineering or equivalent
• Minimum 8 years experience in the network, and/or application/system support domain.
• Must have dealt directly with external customers delivering to SLAs.
• Exposure to ITIL and IT/network components and principles
• Demonstrated maturity in handling complex customer issues and demanding customers
• Ability to coach new joiners and to facilitate their integration into the team
• Knowledge of Airline and CAA customers use of ACM applications
• Ability to organize the activity of a team and to take ownership of issues until resolution

About the role

• Two-year contract
• Reports to Instrumentation Engineer and Senior Instrumentation Engineer;
• Maintain and implement ISO 9001, ISO 14001 & OHSAS 18001/ISO 45001 Management System effectively;
• Follow Instrumentation Engineer’s arrangement in conduct field monitoring tasks;
• Able to complete given task within permitted working hours;
• Maintain and protect the monitoring equipment diligently;
• Follow Instrumentation Engineer’s instruction in carry out adhoc work such as help out in digging manual trialpit, instruments installation.
• Implementation of the highest practicable standards of Health, Safety and Environmental Performance and maintenance of the Management Systems to ensure compliance with appropriate International Standards;
• Follow business management system and corporate compliance procedure;

About you

• Degree in Civil Engineering
• Fresh graduates are welcome
• Able to withstand long hours outdoors
• Ability to exercise job prioritization
• Team player
• Effective communication skills
• Results driven and highly motivated
• Able to deliver under pressure

What we offer

• Competitive salary with Annual Wage Supplement
• Generous paid-leave
• Career & training opportunities (international opportunities possible)
• Company shuttle from various pick-up at MRT stations across Singapore
• Collective health insurance and outpatient benefits;
• Employee Assistance Programme (EAP) to provide help when you need extra support.
• Additional benefits: Long Service Awards, Professional Membership, Weekly fitness-related activities, etc)

**Benefits may vary according to position/contract/grade level.

Responsibilities:

• Perform internal audits as per internal audit schedule in accordance to AS9100, and PART-21 Subpart G requirements OR AS9110C and P-145 requirements
• Manage the qualification and authorization of Technician, Inspector and Signatory (APU)/ Certifying Staff (ARU)
• Facilitate training management, by doing operator audits, manage operator certifications, stamp register control, product authorization matrix, and follow up of re-certification
• Support external audits, (Civil Aviation Authorities, customers and Certification bodies)
• Facilitate and participate in Analysis and Decision committee / Material Review board, related to product non conformity. (APU)
• Manage and update Quality procedures in the Quality Management System
• Validate the qualification of new test equipment
• Participate and contribute in Production Readiness Reviews
• Perform training on Quality related topics for staff
• Manage the internal production or repair quarantine.

Requirements:

• Degree/ Diploma in Quality, Quality Management or Mechanical Engineering or Electrical Engineering or Electronic Engineering or Equivalent
• Minimum 3 years of experience in Avionics Workshop Maintenance Environment/ Electronics Workshop / Mechanical Workshop or production
• Minimum 3 years of Quality Auditing experience
• Experienced in Procedural and Process developments
• Knowledge in: AS9100D (APU), PART-21 Subpart G (APU), Or AS9110C (ARU) Or PART-145 (ARU)

Other Information:

• Working location: Changi
• Working hours: Monday - Friday, 9am - 6pm
• Company transport provided at designated MRT stations

Job Description

Applied Materials is the global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service manufacturing equipment for the semiconductor and display industries. Our innovations are at the foundation of the technology that transforms every part of our lives. We offer an exciting place to grow and learn alongside some of the best people you’ll ever meet. Join us to Make Possible a Better Future.

We are currently seeking for an experienced and passionate Process Engineer (R&D) to join our Applied Materials - NUS Advanced Materials Corporate Lab. The Advanced Materials Corporate Lab combines Applied's leading expertise in materials engineering and semiconductor technologies with NUS' world-class and multi-disciplinary R&D capabilities that span across applied chemistry, materials science and microelectronics process engineering. Apply now if you fit the description below!

​Key Responsibilities

• Devise precursor and deposition strategies and associated intellectual property. Design chemical processes to find new innovative ways to create, remove or clean thin films.
• Prepare the project plan for semiconductor films growth and execute project deliverables from planning to implementation. Be responsible for project milestones and deliverables within project cost.
• Engage with business unit teams and customers to initiate and complete projects. Own the technical development aspects in the pursuit of the project goals.
• Trouble shoot for root causes to project developments obstacles and engage business unit and broader team members implementing proposed solutions to the problems.
• Prioritize the activities to achieve on-time and within budget performance objectives for the project.

Requirements

• PhD in Chemistry, Chemical Engineering and Materials Science
• Have good working experience in ALD, CVD, MOCVD, PECVD film depositions
• Have working experience with novel thin film growth and characterizations
• Have good understanding of vacuum science and general process and hardware trouble shooting of ALD/CVD platforms
• Have basic working knowledge of chemistry and chemical reactions at interfaces

Work Location

• Applied Materials - NUS Advanced Materials Corporate Lab @E6

JOBSCOPE OVERVIEW

1. Represent QA/QC department in 2G Management Meetings or other meetings required by Directors.

2. Create and maintain standard operating procedure (SOP’s), protocols, guidelines that ensure consistency and efficiency throughout the QA cycle.

3. Acts as Committee of all ISO audits.

4. Supervise and manage QA/QC team and interns.

5. Conduct physico-chemical and microbiological test for Chemicals and Incoming Paper.

6. Liaise with suppliers and third-party agencies.

7. Provide technical support to the sales and marketing team regarding product specifications, sample requirement & others.

8. Document those methods in standard operating procedures (SOPs) and production records, quality assurance activities with internal reporting and audits.

9. Review and compile documents for Audits (Batch Record: Prod sheet, Quality control test Reports; FG and RM Reports, Mixing records).

10. Ensure that on time calibration program of equipment (mechanical and lab instruments, weighing scales and test weights) are executed.

11. Assist to do in compounding and mixing when Mixer Operator is on leave.

12. Liaise with Overseas factory (China and Indonesia) to ensure that product or service meets specified requirements.

13. Review method validation study reports, ensure proper documentation of findings, and assist in approval or re-validation recommendations. Prepare summary reports of validation activities, results, and recommendations for management review.

14. Investigate validation failures or deviations, identify CAPA, and ensure implementation. Collaborate with cross-functional teams to enhance the efficiency and effectiveness of validation activities.

15. Identify risks in testing methods, implement mitigation strategies, and ensure data integrity during validation to maintain accuracy, reproducibility, and regulatory compliance.

16. Review and approve method validation documentation, ensuring accuracy, completeness, and compliance with quality standards. Maintain up-to-date records of validation activities, deviations, CAPA, and ensure proper version control for all related documents.

17. Provide training on method validation processes and best practices, and support Production, QC and R&D teams in executing protocols and analyzing data accurately.

18. Any other area of responsibilities that the company deems necessary.

A. QUALITY CONTROL

1. Manage product complaints or non-conformances; thoroughly investigate process failure, determine the root cause, and take prompt corrective actions.

2. Conduct physical, physico-chemical test and microbial analysis of finished product.

3. Track the materials (chemicals and fragrance) that are present in the chemical room and know whether additional supplies need to be ordered.

4. Calibrate all equipment for In-house verification Example – pH meter, weighing scale etc. and arrange external calibration with external party.

5. Train new production operators in quality control.

6. Any other area of responsibilities that the company deems necessary.

B. LIAISE WITH SUPPLIERS (Services):

1. DI Water System Maintenance (Requirements: According to Contract): Loop Sterilization, UV-Lamp etc.

2. Complete Water Quality Testing (annual) by External Lab

3. Monitor the consumable supplies from different suppliers for DI Water (Column, filters, gauges).

4. Wet Wipes Monthly External Microbial testing

5. Monitor the annual cleanroom Certification.

6. External Calibration of Equipment

7. Any other area of responsibilities that the company deems necessary.

C. PRODUCT TECHNICAL SUPPORT

1. Support Export Sales and Marketing for preparation of documentation for regulatory use (COA, Ingredient’s list, FG and RM spec etc).

2. Collaborate with development, QC, and regulatory teams to plan, execute, and review method validation protocols, ensuring compliance with applicable guidelines (e.g., ICH, FDA, EMA) and company procedures, while meeting regulatory standards for intended use.

3. Support on the process validation on the manufacturing of the product.

4. Any other area of responsibilities that the company deems necessary.

· Responsible in providing day-to-day engineering support to manufacturing operations to achieve key business objectives involving quality and productivity.

· Provide support for engineering conception phase all the way to implementation and operations support.

· Work closely with cross functional teams to provide innovative engineering solutions for continue process improvements.

· Active involvement in projects relating to design and implementation of manufacturing-related equipment, such as automated optical inspection units.

· Assist in developing, updating and revising manufacturing documentation in accordance with company policies, relevant standards, and regulations established by regulated agencies (e.g. ISO9001/14001/13485).

· Assist in initiating, evaluating and implementing engineering change order.

· Assist in anyalzing and determining conformance of materials and parts manufactured.

· Assist in monitoring and improving productivity metrics established as company’s goal.

· Participate in development and validation activities for R&D products.

Knowledge in Delta PLC programming and COBOT.

Statement Of Purpose (Overall Purpose of Job)

In charge of the execution of all Solar Installation works inclusive of planning, scheduling, controlling, coordination and ensure works carried out are in accordance to approved shop drawings / specification and complete within the completion date. In addition, budget control and contract administration.
Major Duties & Responsibilities
(A) Specific :

• Evaluate costing received for electrical works.
• Vet through shop drawings to ensure all are in compliance to technical specifications / authority requirements prior to submission.
• Liaise and have meetings with Clients and Consultants on technical resolution / clarification, inspection and submission.
• To be the lead contact point for all Project issues.
• To attend weekly site meeting.
• To build and maintain strong, long-lasting client relationship and meet Client’s expectations.
• To manage, coordinate, work and oversee all workers, sub-contractors and vendors to ensure proper work execution and good workmanship.
• To plan, implement, track the work progress and submit weekly progress report so as to ensure that the project executed is on time and within budget.
• To monitor project cost including variation works and submission of supporting documents.

(B) General :

• To prepare and submit progress reports.
• To maintain proper documentation for all projects.
• To coordinate and work with other departments.
• To engage, coordinate and oversee all project works to ensure successful completion and handing over to Clients.
• Other duties as assigned.

(C) Safety:

• To follow the safety procedures, rules and regulations and eliminate or reduce hazard at the work place.

Job Requirements

(A) Education, Qualifications & Special Training :

• Degree or Diploma in Electrical Engineering or Equivalent.

(B) Knowledge & Skills :

• Well-versed with installation of M&E services and builder’s works.
• Experience in Design and Delivery Execution of Solar System Works and Load Sizing Of Solar Systems.
• Good interpersonal skills.
• Independent & Team player.
• Proactive and able to take initiative.
• Good in negotiation.
• Good communication skills (verbal and written).
• PC literate and knowledge in MS Office.

(C) Experience :

• Minimum 3 years of relevant experiences.

Statement Of Purpose (Overall Purpose of Job)

In charge of the execution of all Solar Installation works inclusive of planning, scheduling, controlling, coordination and ensure works carried out are in accordance to approved shop drawings / specification and complete within the completion date. In addition, budget control and contract administration.
Major Duties & Responsibilities
(A) Specific :

• Evaluate costing received for electrical works.
• Vet through shop drawings to ensure all are in compliance to technical specifications / authority requirements prior to submission.
• Liaise and have meetings with Clients and Consultants on technical resolution / clarification, inspection and submission.
• To be the lead contact point for all Project issues.
• To attend weekly site meeting.
• To build and maintain strong, long-lasting client relationship and meet Client’s expectations.
• To manage, coordinate, work and oversee all workers, sub-contractors and vendors to ensure proper work execution and good workmanship.
• To plan, implement, track the work progress and submit weekly progress report so as to ensure that the project executed is on time and within budget.
• To monitor project cost including variation works and submission of supporting documents.

(B) General :

• To prepare and submit progress reports.
• To maintain proper documentation for all projects.
• To coordinate and work with other departments.
• To engage, coordinate and oversee all project works to ensure successful completion and handing over to Clients.
• Other duties as assigned.

(C) Safety:

• To follow the safety procedures, rules and regulations and eliminate or reduce hazard at the work place.

Job Requirements

(A) Education, Qualifications & Special Training :

• Degree or Diploma in Electrical Engineering or Equivalent.

(B) Knowledge & Skills :

• Well-versed with installation of M&E services and builder’s works.
• Experience in Design and Delivery Execution of Solar System Works and Load Sizing Of Solar Systems.
• Good interpersonal skills.
• Independent & Team player.
• Proactive and able to take initiative.
• Good in negotiation.
• Good communication skills (verbal and written).
• PC literate and knowledge in MS Office.

(C) Experience :

• Minimum 3 years of relevant experiences.

1. Candidates with project experience in commercial office fit-outs are highly desirable.
2. A minimum of 3 years of relevant work experience is required.
3. Fluent in English, both spoken and written is essential.
4. Basic understanding of the design and calculation of HVAC systems is necessary.
5. Assisting with tender calculations, preparing presentation materials for tenders, and participating in tender interviews.
6. Must be a team player, capable of effectively collaborating and communicating with clients, suppliers, contractors, and team members throughout the project.
7. Monitor project costing and progress payment, variation works and cost control.
8. Proficiency in troubleshooting and resolving technical issues that arise during projects is required.
9. Candidates should be able to manage multiple projects simultaneously and perform well under pressure

Job Objective/s

To be able to develop and maintain engineering and production software platforms. Capable of using C#, MySQL, Google App Script, Javascript, Python languages for developments & modifications. Good understanding of the manufacturing workflow environment type of software requirements. Design and build structured database, Data Visualization, data warehouse, data pollings and AI algorithms fitting our use

Duties and Responsibilities

- Development, administration and maintenance of developed software applications such as DMES, G-suite based applications, and engineering tools like for yield analysis softwares and other softwares
- Develop customized solution of MES system for ATP production; extension of MES system from Fab.

- Analyse Data and create Data Visualization using TIBCO software or related software or dashboards
- Lead cross functional team meetings for software solutions and improvements.

- Develop and maintain software programs that improve efficiency and productivity.
- Write, review user requirements, documentation, test plans and deployment of developed software.
- Prepare User’s Manual and Troubleshooting guide
- Qualify User Acceptance Tests (UAT) of developed softwares and modification before to release

- To follow project management approach for software development & progression

- Capable to do systems integration software

Minimum Education

Bachelor’s Degree

Minimum Experience

Minimum 5 years’ working experience with software development.

Specific Knowledge / Skills

• Ability to develop engineering software using industry standard coding languages such as C#, Python, MySQL Query.
• Knowledge and experience on WPF, Google App Script, MongoDB and JavaScript will be added advantage.

1. JOB DESCRIPTION

Job Title

Technician/Engineer (Contract/Perm)

Occupation

Technician/Engineer

Job Description & Requirements

Job Highlights

• 3 months Completion Bonus on 2 years renewable contract
• Mon - Fri 8.30am to 5.30pm. Training provided
• Transport and Mobile Allowance + OT + Medical reimbursement

Job Description

2 years renewable contract with 3 months completion bonus. 5 days week + OT + Transport allowance + Mobile allowance. Responsible for facility hook-up, installation and start-up process of semiconductor equipment.

Responsibilities

• Perform installation work according to guidelines and procedures
• Perform safe and proper move-in according to procedures
• Tally and check the conditions of parts and accessories
• Support engineering activities
• Ensure good EHS compliance

Requirements

• Must possess Min. Certificate / Diploma in Electrical / Mechanical / Electronic Engineering or equivalent
• Preferred bilingual in English and Chinese to handle Chinese speaking customers’ technical enquires & conduct trouble shooting based on customers’ feedback
• Cleanroom environment
• Able to start immediately preferred

Job Description

Key Responsibilities

Performs all CMP standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

About the Role

Seamap Pte Ltd, a leading engineering company in the East Region, is seeking a skilled and motivated Mechanical Engineer to join our dynamic team. In this role, you will contribute to the design, development, and maintenance of cutting-edge engineering solutions that power our innovative projects. As a full-time position, this opportunity provides significant room for professional growth and development.

What You'll Be Doing

• Support the mechanical engineering aspects of all technical department activities.
• Design mechanical components and prepare technical drawings, specifications, and BOMs for new and existing products.
• Assist in vendor sourcing for fabrication of mechanical parts, ensuring quality and cost-effectiveness.
• Collaborate closely with vendors during the fabrication process to ensure adherence to design specifications, conducting quality checks upon delivery.
• Provide mechanical engineering support to other departments (e.g., Production, Repairs) to address customer queries, product issues, and returns.
• Ensure compliance with all relevant roles and responsibilities outlined in the company’s QEHS manual and procedures.

What We’re Looking For

• Mechanical/Mechatronics Engineering Degree or equivalent qualification.
• Minimum of 5 years' hands-on experience in manufacturing or workshop environments.
• Strong mechanical assembly skills with an eye for detail.
• Proficiency in SolidWorks, Creo Parametric, AutoCAD Inventor; capable of producing BOMs and schematic drawings.
• Responsible, team-oriented, and able to communicate effectively in English.
• Strong interpersonal skills, with the ability to integrate seamlessly into an international environment.

What We Offer

• Competitive salary with comprehensive health insurance benefits.
• Clear pathways for career advancement and continuous professional development.
• A supportive and collaborative team environment that fosters growth and innovation.

About Us

Seamap Pte Ltd is a leading engineering company specializing in the design and manufacture of high-quality mechanical systems and components. With a focus on innovation, excellence, and cutting-edge solutions, we have earned a strong reputation for delivering world-class products and services across a wide range of industries. Our dedicated team of professionals is committed to making a meaningful impact and driving progress within the engineering sector.

Apply now to be part of an exciting journey with Seamap!

Who we are

Do you want to join our Geo-data revolution? Fugro’s global reach and unique know-how will put the world at your fingertips. Our love of exploration and technical expertise help us to provide our clients with invaluable insights. We source and make sense of the most relevant Geo-data for their needs, so they can design, build and operate their assets more safely, sustainably and efficiently. But we’re always looking for new talent to take the next step with us. For bright minds who enjoy meaningful work and want to push our pioneering spirit further. For individuals who can take the initiative, but work well within a team.

Job Summary:

Selected candidates will get the opportunity to work as Innovation Electronic Engineer on the design and production of our Next Generation subsea robotics products.

We are transitioning from our industry standard, human operated, hydraulic underwater Remotely Operated Vehicle (ROV) towards a highly autonomous ROV supervised from one of our remote operating centres.

The innovation electronic engineer will work in a team of experienced engineers on the ROV control system, working closely together with oversees R&D centres, internal production teams and global operational teams.

Development of Control system includes:

• Microcontroller, digital, analog, high speed circuitry design from conceptual to working product.
• Simple software programming in the area of peripheral configuration, device driver, test program to facilitate hardware validation.
• Liaise with production department to ensure products are manufactured to the highest quality standard.
• Travel to any part of the world in short notice to provide system support, integration, commissioning and training.

Requirements:

• Proficient in English. Written and spoken.
• Local polytechnic diploma, bachelors or Master’s degree in Electrical, Electronics Engineering.
• Able to perform analog, digital and PCB design with Altium.
• Able to produce isometrix projection drawing in Acad.
• Knowledge in signal integrity and high-speed PCB design.
• Working experience with microcontroller: Z180, PIC24, SAME5X …etc
• Self-motivated and able to work with minimum supervision.
• Passion in learning.
• Candidate with major in power electronic, robotics, automation or autonomous systems would be beneficial.

1. Responsible to MIS Manager for IT infrastructure setup, maintenance, and operations.
2. Has Programming Proficiency in database management systems (e.g. MSSQL, Visual Basics 6.0 & Active Server Pages ASP).
3. Strong Knowledge of Information Security Protocols.
4. Experience in ERP systems for CRM Support.
5. Handle IT project and system implementation which involve gathering information designing and planning. Conduct User acceptance test and provide user training.
6. Manage and liaise with external system vendors related to MIS department when necessary.
7. Provide advice and recommendations to management on proofs and techniques for improved work operations related to customized labels direct USB printing to Seagull Bartender Printer (no Crystal Report).
8. Handle basic hardware troubleshoot, system backup and software support.
9. Assist the MIS Manager in any ad hoc activities related to the MIS department.
10. To compliance with laws and codes pertaining labor and ethics via annual training.
11. Knowledge in Network Protocol environment

Education:

• Diploma or Degree in Computer Science, Information Technology, or any related discipline.
• Equivalent qualifications or certifications in relevant IT/ERP systems support are also considered.