Responsibilities:

• Design, develop, code, and document larger modules as part of firmware projects and lead a firmware project.
• Rich experience on embedded SoC software development and debug environment setup.
• Work with relevant architects, software and hardware teams to finalize the system level solutions and modularize the firmware development works.
• Utilize low level C coding techniques when developing codebases, follow coding standards and follow standard development best practices.
• Read schematics, utilize oscilloscopes, digital analyzers, and other test equipment in the development and debugging of firmware designs.
• Have fundamental knowledge about the operating system and its common drivers, especially understanding basics of RTOS.
• Have fundamental knowledge about inter-chip communications in heterogenous processor environment, and able to use OpenAMP or RPC such techniques.
• Understand storage devices/controller (i.e. SAS, SATA etc.) driver, protocols and firmware design is a plus.
• Understand power management at system level and OS power management handling is a plus, especially familiar with PMIC firmware.
• Understand the virtualization techniques on server environment is a plus.

Requirements:

• Minimum degree in Bachelors Engineering in Computer Science/Engineering, Electrical Engineering, related field or equivalent experience on embedded system.
• Minimum of 3-5 years of experience
• Experience with implementing embedded operating systems such as Linux, FreeRTOS on target hardware
• Demonstrated experience with C/C++/assembly language programming.
• Demonstrated experience with ability of problem analysis and solving.
• Familiar with RISC-V/ARM ISA is a plus.
• Good team player and be able to prioritize the tasks and delivery the modalized development work.

· Drive Technical and Maintenance support to all operating facilities in instrumentation and control systems, including ICSS / DCS / PLC

· Ensure the installations are maintained and managed with respect to regulatory requirements

· Actively contribute with technical and advisory support to Operations Managers / Maintenance Managers and offshore facilities in terms of Instrumentation and Control Systems

· Actively contribute to incident investigation and provide technical support to Emergency Response team as and when required

· Participate in planned shutdown as and when required

· Review and provide the engineering solutions for Management of Change Request from Facilities as per procedure

· Review the Shutdown / Breakdown Reports and verify / carry out Root Cause Analysis

· Update Lesson Learned Register based on Management of Change Request, Shutdown / Breakdown Reports review, Survey / Audit Reports etc.

· Provide in-house training for the offshore team as and when required

· Carry out competency evaluation for onboard E&I Supervisors and Instrument technicians as requested

· Provide budget requirements in terms of maintenance, long term plan and surveys

· Provide input for new project bids and variation orders, based on Lessoned Learned from operating facilities

· Act as a mentor and resource for new employees and less experienced colleagues

· Continuously make suggestions for improvements in all spheres of influence

· Additional responsibilities as required

The Snr Systems Engineer manages the systems administration function and leads the organisation's system projects and environments. He/She focuses on setting goals and priorities and on mentoring and coordination as well as providing technical leadership. He/She plans and oversees systems upgrades and migrations and ensures systems are up-to-date with the latest patches and are coherent across the organisation. He/She directs the development and maintenance of technical documentation.

He/She possesses strong leadership and communication abilities, and is able to set realistic goals and implement appropriate plans to guide the team toward achieving those goals. He/She is able to address multi-faceted issues effectively and in a collaborative manner including across departments. Set system administration processes

Role and Responsibilities:

Set system administration processes

• Establish goals and priorities, design, planning, day-to-day operation, maintenance, and advanced troubleshooting of systems

• Align system administration with overall strategic IT service direction and business needs

• Assist with the development of business case justifications and cost/benefit analyses for spending and initiatives

• Anticipate internal and/or external business challenges and/or regulatory issues

• Develop policies, procedures, and controls to ensure system security

Develop New Systems

• Partner with stakeholders to recommend innovative and automated approaches for system administration

• Define systems requirements for new technology implementations

• Prepare for system expansion by studying plans and requirements

• Oversee the design, maintenance and implementation of the systems

• Prioritise tasks to ensure projects are implemented in accordance with project plans and budgets

Optimise Systems Performance

• Recommend process, product or service improvements, resource optimisation and cost savings

• Oversee hardware and software upgrades

• Recommend new technologies, methodologies, systems or opportunities for cost savings, security and service quality improvement

Manage Teams

• Oversee team management including budgets, forecasting, work allocations and staffing

• Develop staff through ongoing coaching, mentoring and career discussions

• Define common goals, direction and accountability among staff

• Drive effective performance management practices within department in accordance with company policies and procedures

Requirements / Qualifications

• Degree in Information Technology or related

• Candidates must have at least 6 years of hands-on experience in Linux with ability to work with the project team in implementation projects as well as perform system administration activities for Linux systems. Knowledge in SAP will be advantageous but not required.

• At least 6 - 8 years’ experience in developing, implementing and maintaining IT systems

The Web Development Engineer will be responsible for the design, development, and maintenance of web applications. This role requires a strong understanding of web technologies, programming languages, and software development methodologies. The ideal candidate will be a passionate developer with a keen eye for detail and a commitment to delivering high-quality code.

Responsibilities:

• Front-end Development:Develop user-friendly and responsive web interfaces using HTML, CSS, and JavaScript.
  Utilize front-end frameworks (React, Angular, Vue.js) to build efficient and scalable applications.
  Optimize website performance and user experience.
  
• Back-end Development:Develop server-side logic and APIs using programming languages like Python, Ruby, or Node.js.
  Integrate with databases (MySQL, PostgreSQL, MongoDB) to store and retrieve data.
  Implement security measures to protect web applications from vulnerabilities.
  
• Full-Stack Development:Work on both front-end and back-end development to deliver end-to-end solutions.
  Collaborate with designers and other developers to create seamless user experiences.
  
• Testing and Debugging:Write unit and integration tests to ensure code quality and functionality.
  Debug and troubleshoot issues to maintain application stability.
  Conduct performance testing to identify and optimize bottlenecks.
  
• Deployment and Maintenance:Deploy web applications to production environments using deployment tools and processes.
  Monitor application performance and address any issues that arise.
  Implement regular updates and security patches.
  

Pre-Requisites :

• Bachelor's degree in Computer Science, Electrical Engineering, or a related field.
• 4+ years of experience in web development.
• Strong proficiency in HTML, CSS, and JavaScript.
• Experience with front-end frameworks (React, Angular, Vue.js) and back-end languages (Python, Ruby, Node.js).
• Knowledge of database technologies (MySQL, PostgreSQL, MongoDB).
• Understanding of web servers (Apache, Nginx) and application servers.
• Experience with version control systems (Git).
• Strong problem-solving and debugging skills.
• Ability to work independently and as part of a team.

Preferred Qualifications:

• Experience with cloud platforms (AWS, Azure, GCP).
• Knowledge of DevOps practices and tools (Jenkins, Docker, Kubernetes).
• Experience with testing frameworks (Jest, Mocha, Chai).
• Understanding of web security best practices.

Job Overview

The future of technology is full of amazing possibilities that started in semiconductor manufacturing plants. Autonomous driving, drones, the Internet of Things – all of it is possible because of the breakthroughs in semiconductor manufacturing. From large dust-free factory to fully automated machines, this unmanned factory is not a dream but a testament of UMC daily operation in our contribution towards the future of technology. Join us and be part of UMC Smart Factory in managing complex production processes which allow you to experience first-hand on the operation of state-of-the-art factory and accelerate your growth!

Responsibilities

• Manage the production metrics of fully automated production lines
• Predictively identify and address possible production bottlenecks in a timely manner
• Coordinate resources to achieve daily production goals
• Lead in continuous improvement projects to increase productivity, staff operation efficiency and quality

Qualifications

• Possess at least a Bachelor's Degree in Electronic Engineering, Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering, Industrial Engineering, or Computer Science.
• At least 2 years of relevant working experience in semiconductor industry foundry
• Adept in project management as well as a strong sense of commitment
• Possess good communication skills in coordinating between relative parties
• Is self-demanding and committed to innovative solutions to complete tasks
• Proficiency in Excel(VBA) & SQL or Tableau for data analysis
• Able to commit shift work
• On duty required on weekend and Holiday
• Standby 24-hour for Fab Operation

Research Engineer

As part of National Semiconductor Translation and Innovation Center (NSTIC), the candidate will be involved in the photonic device fabrication based on Silicon-based material platforms (Silicon-on-Insulator, Silicon Nitride, Germanium (Ge), and SiGe), Lithium Niobate, and III-V semiconductor materials. The candidate will work closely with multidisciplinary team with diverse expertise.

Responsibilities

• Develop, design, and optimize integration flow for Silicon Nitride-based and Lithium Niobate-based photonic devices, including lithography, etching, deep-trench, and dicing.
• Design of experiments (DOE) for different process integration flows.
• Liaise between design, fabrication, and testing teams to ensure smooth process integration and device fabrication.
• Metrology, data analysis, and documentation
• Present and discuss experimental data to the team

Qualifications

• Degree in Electronics Engineering, Microelectronics, Physics, or equivalent.
• Experiences in semiconductor industry, preferably in silicon photonic processes.
• Good critical thinking and problem-solving ability.
• Able to work with cross-functional team, with good communication/presentation skill.
• Able to work in a fast-paced and collaborative environment

Research Engineer

As part of National Semiconductor Translation and Innovation Center (NSTIC), the candidate will be involved in the photonic device fabrication based on Silicon-based material platforms (Silicon-on-Insulator, Silicon Nitride, Germanium (Ge), and SiGe), Lithium Niobate, and III-V semiconductor materials. The candidate will work closely with multidisciplinary team with diverse expertise.

Responsibilities

• Develop, design, and optimize integration flow for Silicon Nitride-based and Lithium Niobate-based photonic devices, including lithography, etching, deep-trench, and dicing.
• Design of experiments (DOE) for different process integration flows.
• Liaise between design, fabrication, and testing teams to ensure smooth process integration and device fabrication.
• Metrology, data analysis, and documentation
• Present and discuss experimental data to the team

Qualifications

• Degree in Electronics Engineering, Microelectronics, Physics, or equivalent.
• Experiences in semiconductor industry, preferably in silicon photonic processes.
• Good critical thinking and problem-solving ability.
• Able to work with cross-functional team, with good communication/presentation skill.
• Able to work in a fast-paced and collaborative environment

Assist with infrastructure planning and design

• Assist with the planning and design of infrastructure systems
• Assist with the documentation of infrastructure design and planning activities and decisions

Support infrastructure operations

• Perform infrastructure operations activities such as installations of infrastructure systems according to design specifications
• Align infrastructure operations with agreed service agreement standards

Maintain infrastructure

• Perform activities related to ongoing maintenance of infrastructure
• Assist with the implementation of agreed infrastructure changes and maintenance routines

Optimise infrastructure performance

• Perform ongoing tuning and optimisation of infrastructure hardware and software components such as updates and upgrades
• Participate in infrastructure development activities
• Assist with infrastructure testing and implementation
• Gather performance and data usage statistics for capacity planning and reporting
• Assist with piloting of new tools, technologies, and/or processes

Resolve incidents

• Perform problem/issue identification and resolution
• Assist with simulation of user problems to resolve operating difficulties
• Follow up with users to ensure problem has been resolved
• Recommend system modifications to reduce user problems

Requirements

• At least 6-8 years' of experience in the Network Management and Support Services, Unified Communication, Wirecenter maintenance
• Strong knowledge and experience in supporting Cisco Switch, Cisco Router, Fortigate Firewall, Palo Alto Firewall, ClearPass NAC, F5 VPN, IPS, WLC, Access Point and VSS/VLAN Architectures.
• Network Support in the areas of wireless, wired, VPN
• Network certifications eg CCNE, CCNA

Research Engineer

As part of National Semiconductor Translation and Innovation Center (NSTIC), the candidate will be involved in the development of heterogeneous integration process for realizing multi-functional photonic devices. The candidate will work closely with multidisciplinary team with diverse expertise.

Responsibilities

• Develop, design, and optimize die-to-wafer bonding process employing III-V semiconductor material, Lithium Niobate on Insulator (LNOI), and Si-based material platforms.
• Design of experiments (DOE) for various Die-to-Wafer (D2W) bonding methodologies.
• Liaise between design, fabrication, and testing teams to ensure smooth process integration and device fabrication.
• Metrology, data analysis, and documentation
• Present and discuss experimental data to the team

Qualifications

• Degree in Electronics Engineering, Microelectronics, Physics, or equivalent.
• Experience in semiconductor industry is preferred. Those with strong familiarity with wafer-to-wafer and die-to-wafer bonding process may be considered for a senior position.
• Good critical thinking and problem-solving ability.
• Able to work with cross-functional team, with good communication/presentation skill.
• Able to work in a fast-paced and collaborative environment

Research Engineer

As part of National Semiconductor Translation and Innovation Center (NSTIC), the candidate will be involved in the development of heterogeneous integration process for realizing multi-functional photonic devices. The candidate will work closely with multidisciplinary team with diverse expertise.

Responsibilities

• Develop, design, and optimize die-to-wafer bonding process employing III-V semiconductor material, Lithium Niobate on Insulator (LNOI), and Si-based material platforms.
• Design of experiments (DOE) for various Die-to-Wafer (D2W) bonding methodologies.
• Liaise between design, fabrication, and testing teams to ensure smooth process integration and device fabrication.
• Metrology, data analysis, and documentation
• Present and discuss experimental data to the team

Qualifications

• Degree in Electronics Engineering, Microelectronics, Physics, or equivalent.
• Experience in semiconductor industry is preferred. Those with strong familiarity with wafer-to-wafer and die-to-wafer bonding process may be considered for a senior position.
• Good critical thinking and problem-solving ability.
• Able to work with cross-functional team, with good communication/presentation skill.
• Able to work in a fast-paced and collaborative environment

Position Summary

The CIM Engineer is responsible for the implementation, maintenance & development of semiconductor automation facilities.

Candidates with Semiconductor, LCD industrial automation industries or smart factory / CIM experience are encouraged to apply for this position.

Key Responsibilities

• Development and maintenance of Quality Management system (QMS), Facility Automation (MC) system and Logistics automation (MCS) system.
• Responsible for new automation requirement, system survey, any modifications or improvement works.
• Identify equipment failures, root cause analysis, and recommend solution for technical issues.
• Provide cross-functional cooperation and vendor interaction to troubleshoot, analyze and develop solutions for problems involving integrated systems.

Requirement

• Bachelor’s Degree in Engineering, Computer Science, IT or similar.
• More than 5 years of experience in related field including 3 years of development experience.
• Team player with strong analytical and problem-solving skills.
• Experience in the following:

1. Programming languages (C, C#, .Net, etc.) and DBMS (Oracle, MS-SQL, etc.)
2. SECS-I, SECS-II, HSMS/GEM, OPC, TCP/IP
3. Facility and supersystem (MES, EMS, etc.) interface
4. Logistics AGV, ACS for OHT control, OCS
5. Smart factory/CIM implementation experience

Preferred Qualifications

• Quality related implementation and operation (SPC, TAMS, YMS, DMS, RMS, etc.)
• Facility interface experience through facility automation solution
• MCS solution R&D experience

About TUMCREATE

TUMCREATE is a multidisciplinary research platform of the Technical University Munich (TUM) at the Singapore Campus for Research Excellence and Technological Enterprise (CREATE). We are joining forces with universities, public agencies, and industry for the advancement of future technologies.

A new multi-disciplinary project named “Centre for Energy & Emissions Modelling (CE2M) Phase 2” hosted by A*Star with TUMCREATE as one of their partners has been launched. The overall goal of this project is to provide policymakers with a toolbox to explore pathways to “net zero” in Singapore. For this purpose, an existing model integration framework shall be enhanced through a systems of system modelling & simulation approach. Different models will be coupled using interfaces that enable them to communicate with one another.

Please visit www.tum-create.edu.sgfor more information about TUMCREATE.

Objective of the position:

We are looking for an experienced Software Engineer who will work on building interfaces between models and to expand existing models to facilitate model coupling. This is a 24-month fixed term contract with the possibility of extension.

Job Responsibilities:

• Familiarise with and review existing models developed by the project partners.
• Identify weak points of the models, particularly with regards to interfacing them with other models.
• Define and implement interfaces between the models.
• Contribute to the development of a system-of-systems model that includes all models.
• Presentation of the results in at least one international scientific journal.

Job Requirements:

• PhD or Master’s degree in Electrical Engineering, Computer Science or a related field from a reputable university.
• Knowledge of software development and versioning systems.
• Programming knowledge of Python.
• Experience in software modelling, preferably in the field of energy and power systems.
• Knowledge of energy and power systems is preferable.
• Knowledge of the tools URBS and TIMES is a plus.
• Ability to interact with other researchers and define a working structure.
• Good English writing and communication skills.
• Good interpersonal skills for working in an international research team with people of different backgrounds.

What TUM CREATE offers you:

• Competitive salary that commensurate with experience
• Medical insurance
• Good amount of leave/vacation days
• Vibrant, modern and positive working environment in Singapore
• Campus-sited office location with a host of facilities
• In-building perks including gym, game room and coffee room

Applications:

Please send your application including cover letter and CV to [email protected].

We look forward to receiving your application.

PURPOSE OF THE JOB

The Mechanical/Thermal/Process Engineer will support diverse power and energy consulting projects throughout the Asia region. Further responsibilities would also include assisting in business development and proposal preparation, collaborating with WSP's regional and international experts as needed.

MAIN RESPONSIBILITIES

As a Mechanical Engineer within the Power and Energy Team, your responsibilities will include:

• Supporting Clients during project feasibility studies, appraisals, procurement evaluations, contractor/vendor design reviews, engineering processes, construction, commissioning, and performance testing, and when required, presenting to clients.
• Contributing to preparing design specifications and provide technical advice to clients on various aspects of power plant development, including configuration options, performance evaluation, prime equipment selection, Balance of Plant (BoP) systems and components, reliability and availability analysis, enabling infrastructure, and considerations for project implementation.
• Assisting managing the technical delivery requirements of projects and project execution to ensure they meet established standards and client expectations.
• Assisting in Business Development and Proposal Preparation, collaborating when required with WSP's regional and international experts as required.
• Conducting market analysis, identifying opportunities, and helping to building business cases for new projects and services.

QUALIFICATIONS

• Master/Bachelor of Engineering degree in Mechanical/Chemical engineering.
• 3 to 10 years of experience as a mechanical/process engineer in the power and energy sector, ideally developed within a plant/system design role or professional services/consulting environment.
• Familiar with gas turbines, CC & CHP power plants, or waste-to-energy plants, including key technologies & components and project lifecycle considerations.
• Experience of working with public and private sector clients in the Asia region.
• Experience in managing and developing client relationships, driving sales, and achieving business growth in engineering consulting or a similar technical industry.
• The following are desired:

1. An additional business qualification (e.g., MBA) would be advantageous.
2. Knowledge of, or the ambition to learn and develop, expertise in process systems for generation of biofuels and power plant waste cleaning systems such as flue gas and wastewater treatment.
3. Familiarity with any design software such as Thermoflow’ GTPro, Steam Pro, CFD, PVsys, WAsP, etc., would be advantageous.
4. Proficiency in MS Office.
5. Experience with project management methodologies and project planning software tools such as, Primavera and MS Project.
6. Ability to collaborate and work effectively with cross-functional teams.

Job Description:
We are looking for a highly experienced Senior Backend Java Engineer to lead the design and development of backend systems for high-traffic social products. You will play a critical role in system architecture, performance optimization, and mentoring the team to deliver scalable and robust solutions.

Job Responsibilities:

• Responsible for the architecture design and construction of scalable backend systems for social products.
• Design system software architecture, including modules, key components, and interfaces, ensuring high availability and high concurrency.
• Participate in technical planning and architecture reviews, delivering high-quality technical designs.
• Write and review core code, conduct project code reviews, and continuously optimize system performance.
• Troubleshoot and resolve complex bugs and technical challenges throughout the development process.
• Work closely with algorithm teams to implement and adjust real-time algorithm configurations based on business requirements.
• Guide and mentor team members, coordinate development efforts, and resolve technical issues to ensure smooth project execution.

Job Requirements:

• Bachelor’s degree or higher in Computer Science, Software Engineering, or related fields.
• 5+ years of backend development experience, with a strong focus on Java.
• Experience in internet companies is a must, with a strong preference for candidates who have worked at Shopee, TikTok, or similar high-traffic and high-load technology organizations.
• Proficiency in microservices architecture and distributed systems for high-traffic and high-load environments.
• Strong experience with technologies such as: Spring Cloud, Zookeeper, Redis, Kafka, Elasticsearch (including principles, cluster deployment, and optimization).
• Solid understanding of system optimization, concurrency, and horizontal scaling.
• Knowledge of recommendation systems, algorithm engineering, or real-time estimation techniques is a plus.
• Strong communication, teamwork, and project management skills.
• Fluency in English and Chinese for professional communication.

Main Responsibilities

• Reports to the Principal Engineer (Electrical).

Design & Solutioning

• ­ Support/participate in engineering design for integration and system development HVAC electro-mechanical systems.
• ­ Prepare, or supervise the preparation of, drawings for HVAC plant system general arrangements, power single line diagrams, cable block diagrams, instrumentation loop diagrams, P&IDs, control system architecture drawings, and cable, instrument and I/O schedules at detailed design level.
• ­ Drafting of panel layout, schematic and control drawing of starter and PLC panel.
• ­ Develop and release of engineering component and assembly drawings.

Projects & Operations

• ­ Support schedule development for key project timelines/milestones.
• ­ Participate Factory Acceptance Test (FAT) of starters and PLC panels.
• ­Conduct testing and commissioning for projects.
• Attend to ad-hoc electrical issues at maintenance sites for troubleshooting and provide recommendations.
• Contractor liaison, engagement/provide requirements.
• ­Supervision: Oversee engineers/subcontractors to generate detailed drawings, compile reports.
• Perform review/analysis, perform diagnostics and troubleshooting of electrical issues.

• Evaluate / review selection of electrical subcontractors.
• Review testing and certification reports.
• Quality Assurance: Complete electrical quality assurance tasks and equipment inspection.
• Training: Assist with recruitment, training, and onboarding of new hires.
• Safety and Compliance: Ensure a safe work environment and compliance with relevant standards.

Qualifications and experience

• Education: Diploma/Degree in Engineering/Facility Management
• Experience: >10 years project/facility management, factory plant operations.
• ­In-depth knowledge in panel design, layout arrangement of starter panel and PLC panel.
• ­In-depth knowledge on HVAC systems and HVAC(ACMV) controls, VFD, Start-Delta and Auto Transformer starters.
• Knowledge on HVAC systems, facility, safety and construction regulations with respect to chiller system installation would be an advantage.
• Skills: Strong problem-solving, analytical, and organizational skills. Proficiency with CAD software and excellent communication abilities.
• Certifications: Well versed in Singapore CP and Standards for panel design and electrical discipline.
• Required fluency in English; And/or Mandarin/Cantonese, other Asian languages would be beneficial e.g. Korean/Bahasa/Thai etc.).

Key Qualities

• Leadership: Demonstrate strong leadership and motivational skills.
• Interpersonal Skills: Excellent negotiation and communication skills to establish relationships with clients, vendors, and suppliers.
• Adaptability: Ability to multitask and adapt to new challenges and technologies.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible and focus on creating an engineering plan for land development based on their calculations and any research conducted. They should have experience with AutoCAD and be able to utilize strong design skills in order to create visual aids. By utilizing strong organizational and communication skills, this candidate will also have the ability to execute a project based on the criteria outlined.

Key Responsibilities

• Take charge of facility CIVIL&MEP package concept design and RFP Preparation for 300mm semi-conductor Fabrication plant.
• Supervise and monitor EPC contractors or design consultants’ design progress.
• On-site management CIVIL&MEP package construction schedule and commissioning.

Education Qualification & Essential Experiences

• Bachelor's degree in Civil Engineering or a related STEM field.
• More than 5 years of construction project management experience, including 300mm semi-conductor Fabrication plant construction experience.
• Good written and verbal communication skills in English
• Good skills of computer software e.x. Microsoft Office, Microsoft Project, AutoCAD etc.
• Candidates with proactive attitude and responsibility good collaboration experiences in construction project.

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Key Responsibilities

• Take charge of facility MEP package concept design and RFP Preparation for 300mm semi-conductor Fabrication plant.
• Supervise and monitor EPC contractors or design consultants’ design progress.
• On-site management MEP package construction schedule and commissioning.

Education Qualification & Essential Experiences

• Bachelor's degree in Mechanical Engineering or related field.
• 300mm fab facility mechanical system operating experience, especially Exhaust / Chiller / PCW & Clean Room Systems.
• Good written and verbal communication skills in English.
• Good skills of computer software e.x. Microsoft Office, Microsoft Project, AutoCAD etc.
• Candidates with proactive attitude and responsibility good collaboration experiences in construction project.

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

We are looking for a talented and ambitious candidate to join our team in developing next-generation quantum sensors. The position will focus on modeling the dynamics and fabricating cryogenic components for the superconducting levitation of ferromagnetic particles.

This levitated, freely precessing particle forms a system of correlated spins, capable of rapidly averaging out quantum uncertainty. By harnessing this system, we aim to develop quantum sensors with sensitivities that exceed the standard quantum limit.

This position is based in the Quantum Innovation Centre (Q.Inc) and Institute of Materials Research and Engineering (IMRE). The successful candidate will contribute to a range of innovative activities, including:

Key Responsibilities:

• Modeling the dynamics of the levitated particle
• Microfabrication of the particle, silicon pocket, and superconducting materials
• Learning to operate a dilution refrigerator

Job Requirements:

• Bachelor's or master’s in physics, Applied Physics, Precise Instrumentation, or related fields
• Past experience in the job activities listed above is preferred, but a strong willingness to learn is sufficient. Trainings will be provided.
• Strong motivation for multidisciplinary research
• Prior experience in superconductivity and/or quantum sensing is highly preferred
• Basic programming skills (e.g., Python, MATLAB)
• Mechanical design
• Ability to work as a team and communicate effectively

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job summary

Support project delivery across Software Development Life Cycle, including analysis, design, development, QA, UAT, maintenance, and ongoing support

Job Responsibilities:

• Support the delivery of projects in all aspects of Software Development Life Cycle including system analysis, design, development, quality assurance, UAT, maintenance and ongoing support
• Contribute to Agile software development lifecycle and be familiar with DevOps processes
• Collaborate with cross-functional teams to troubleshoot ERP system problems and streamline data exchange with external systems
• Assist in user training to enhance system understanding and utilization
• Analyze business processes to optimize system efficiency and align capabilities with organizational goals
• Gather and document system requirements from stakeholders for enhancement, ensuring data integrity and accuracy
• Customize and configure the ERP system to meet business needs, implementing access controls for security
• Develop reports, dashboards, and custom solutions using development tools and frameworks for insightful system performance analysis
• Stay updated on system releases, industry best practices and continuously identify opportunities for system improvement
• Assist with ad-hoc duties assigned by Manager

Job Requirements:

• Bachelor's degree in Information Technology/ Computer Science or related field
• Minimum 3 years of experience in full stack software development, including 3 cycles of implementation
• Proven expertise in ERP system support, analysis and customization
• Strong troubleshooting skills and proficiency in SQL and database management
• Solid understanding of object-oriented programming (OOP) concepts
• Proficiency in specific ERP development tools and frameworks (e.g., BAQS, Dashboards, BPMs, UD fields)
• Experienced in developing application using .NET Framework, C#
• Advantageous to have experience with Epicor, Navision and Microsoft development technologies like C/AL, Dynamics NAV/ Business Central, .NET and Azure
• Effective communication and interpersonal skills, able to work independently or within a team
• Strong analytical thinking and problem-solving skills, with a keen attention to detail and a commitment to delivering high-quality results

Job Description:

• Perform physical failure analysis using FIB techniques;

• Sample preparation for above related techniques;
• Prepare service report for related customers;
• Document new failure analysis operating procedures, training and certification specs;
• Communicate with customer for selecting proper analytical technique and data interpretation;
• Participate in new failure analysis techniques development and evaluation of new technologies.

Job Requirements:

•Diploma/Degree in Engineering,

• Fresh graduates are also welcome to apply;
• Experience of using FIB/SEM/EDX is highly desired;
• Knowledge of semiconductor devices, hard disk devices, LED etc is a plus;
• Keen to learn and able to perform independent work;
• Able to do night shift work with flexible working periods. (night shift)
• Very attractive allowance will be given for the night shift.

Wärtsilä is a world leader in marine technology and leading the industry's transformation towards a decarbonised and sustainable future. With the world’s widest portfolio and service network, we – Wärtsilians - deliver efficient, safe and sustainable integrated products and solutions to enhance the business of our customers. The opportunities presented through digitalisation and new technologies are offering a new era of shipping. Did you know that shipping is the world’s most efficient mode of transportation and that approximately 90% of world trade is carried by sea?

We want to change the course towards an interconnected and cleaner maritime future and are constantly on the lookout for future-oriented talent to join our team and to work towards enabling sustainable societies through innovation in technology and services - together. Are you ready to jump onboard?

We are looking for a Service Engineer, 2-stroke Services. This is a permanent opportunity, and its location is Singapore.

As a Service Engineer, 2-stroke Services, your responsibilities for the role include:

- Perform Field Service activities according to the work plan

- Perform mechanical/electrical and troubleshooting on 2-stroke engines and ancillary equipment

- Perform technical advisory for repair activities executed on customers' responsibility

- Commissioning of service products

- On-site team leading and managing of the assigned team and related activities during the work execution

- Interact with customers during the work execution

- Interacting with Field Services back office and Technical Services during work execution

- Perform internal and external progress status up-dates of the assigned work

- Ensure that the work is executed according to Wärtsilä Quality, Health, Safety, and Environmental guidelines and customer site procedures.

- Create the Service Work Reports

- Proactively consulting, advising, and promoting available Wärtsilä solutions and products to customer

To be successful in this role, we expect you to have:

- BSC Degree with 2-5 years of working experience in the related field

- Diploma in mechanical, and marine engineering with more than 5 years of working experience in the related field

- Excellent technical knowledge and problem-solving skills

- Good command of English, both written and oral

- Ability to work independently

- Willingness and flexibility to travel up to 80% of the time

- Ability to create internal and external work reports

- Ability to communicate and interact well with customers and other stakeholders

- Literacy in Information Management Applications/ Tools such as MS Office

At Wärtsilä we value, respect and embrace all our differences, and are committed to diversity, inclusion and equal employment opportunities; everyone can be their true self and succeed based on their job-relevant merits and abilities.

This is Wärtsilä

Wärtsilä is a global leader in innovative technologies and lifecycle solutions for the marine and energy markets. Our team of 17,000 professionals, in more than 200 locations in 68 countries, shape the decarbonisation transformation of our industries across the globe. Read more on www.wartsila.com.

Contact & next steps

Does this sound like the job for you? If yes, we hope to hear from you before the application deadline by submitting your application through our careers portal. Are you still wondering if you should apply and would like to get something clarified? Please reach out to David Samuel, Talent Acquisition Specialist ([email protected]) with any questions related to this position.

#FSWSCareers

Project Engineer (Mechanical / Electrical Engineering)

We are currently seeking a highly organized and detail-oriented individual to join our team as a Project Engineer. In this role, you will be responsible for overseeing and managing various engineering projects from conception to completion. You will work closely with cross-functional teams to ensure projects are delivered on time, within budget, and meet the required standards.

As a Project Engineer, your role will involve analysing project requirements, developing project plans, conducting feasibility studies, and coordinating project resources. You will also be responsible for monitoring project progress, identifying potential issues, and implementing corrective actions when necessary. Additionally, you will collaborate with external stakeholders, such as clients and contractors, to ensure effective communication and successful project outcomes.

To excel in this position, you must possess strong project management skills, technical expertise, and excellent problem-solving abilities. You should be able to work well under pressure and manage multiple projects simultaneously. Exceptional communication and interpersonal skills are also essential for effectively collaborating with various stakeholders.

Responsibilities

• Develop and implement project plans based on project scope and objectives
• Conduct feasibility studies and perform risk assessments to ensure project viability
• Coordinate and allocate project resources, including personnel, materials, and equipment
• Monitor project progress and ensure adherence to timelines, budget, and quality standards
• Collaborate with cross-functional teams to identify and resolve project issues
• Conduct regular project meetings to provide updates, discuss challenges, and make decisions
• Prepare and present project reports, including status updates and performance metrics
• Maintain effective communication with clients, contractors, and other external stakeholders
• Good knowledge or certified in WSH.

Requirements

• Bachelor's degree in electrical/electronic/mechanical engineering with 2 years of experience
• Excellent communication and interpersonal skills, both verbal and written in English.
• Good skills in using MS Office application and AUTOCAD
• Proven experience in project management, preferably in an engineering or construction setting
• Strong knowledge of project management methodologies and tools
• Solid understanding of engineering principles and construction processes
• Exceptional problem-solving skills and the ability to think critically.
• Strong organizational and time management skills with the ability to prioritize tasks effectively.
• Ability to work well under pressure and meet tight deadlines.
• Detail-oriented and able to maintain a high level of accuracy in all work activities.
• Excellent team player with the ability to collaborate effectively with cross-functional teams.
• Professional certification in project management is a plus.
• Familiar with relevant WSH certification courses for commercial and industrial areas.

You will be involved in the end-to-end agile development lifecycle for in-house RPA and AI/ ML projects starting from UI/ UX Design to Cloud Engineering & Operations, Software Development, DevSecOps, Quality Assurance and Application Security.

Key Responsibilities

1. Provide mentorship, evaluate submitted problem statements and work with Product Owner and/or Citizen Developers to automate potential day-to-day processes and workflows using Robotic Process Automation and AI/ ML (RPA)

2. Work with UI/ UX Designer as they engage the Product Owner and stakeholders for user research to produce the User Journey Maps and high-fidelity wireframes, which feeds into development sprints (where required)

3. Develop clean, efficient and extendable codes using C, C++, Java and other relevant programming languages, which includes understanding code refactoring and design patterns to reduce and/or eliminate technical debt (where required)

4. Work with Cloud Engineers to setup cloud services for deployment on Government Commercial Cloud (where required)

5. Work with Quality Assurance Engineer to prepare test cases as well as entry and exit criteria for SIT and UAT to ensure that user requirements are met as described per product backlog

6. Work with Application Security Engineer to perform System Security Acceptance Test (SSAT), which includes Secure Code Review (SCR), Vulnerability Assessment (VA) and Penetration Test (PT) and remediate the security findings before seeking clearance and approval from CISO and CIO respectively (where required)

7. Maintain and update library of reusable code snippets, components and modules

8. Develop technical documentation to guide future RPA and AI/ ML development projects

9. Identify best practices and continuous improvement in deployed automations

10. Conduct RPA and AI/ML-related brown bags and information sessions for staff to share knowledge and increase adoption

Requirements

1. Background in Computer Science, Engineering or related disciplines.

2. Highly proficient in programming languages such as Python, C, C++, Java and other relevant programming languages.

3. Good technical knowledge and experience working with RPA tools such as Blue Prism, UiPath, etc as well as basic understanding of foundation models from Microsoft, AWS and Google.

4. Participated in at least one full software or product development cycle, preferably using Agile Methodology

5. Excellent communication skills

6. Teamwork and collaboration skills

7. Possess critical thinking and problem-solving skills

Project Engineer (Electrical & Electronic)

As a Project Engineer, your role will involve analysing project requirements, developing project plans, conducting feasibility studies, and coordinating project resources. You will also be responsible for monitoring project progress, identifying potential issues, and implementing corrective actions when necessary. Additionally, you will collaborate with external stakeholders, such as clients and contractors, to ensure effective communication and successful project outcomes.

To excel in this position, you must possess strong project management skills, technical expertise, and excellent problem-solving abilities. You should be able to work well under pressure and manage multiple projects simultaneously. Exceptional communication and interpersonal skills are also essential for effectively collaborating with various stakeholders.

Responsibilities

• Develop and implement project plans based on project scope and objectives
• Conduct feasibility studies and perform risk assessments to ensure project viability
• Coordinate and allocate project resources, including personnel, materials, and equipment
• Monitor project progress and ensure adherence to timelines, budget, and quality standards
• Collaborate with cross-functional teams to identify and resolve project issues
• Conduct regular project meetings to provide updates, discuss challenges, and make decisions
• Prepare and present project reports, including status updates and performance metrics
• Maintain effective communication with clients, contractors, and other external stakeholders

Requirement

• Candidate must possess a Bachelor's Degree in Engineering (Electronic & Electrical).
• Familiar and experience in ISO certifications and WSH.
• Excellent communication and interpersonal skills, both verbal and written in English.
• Good skills in using MS Office application, AUTOCAD and SolidWorks.
• At least 2 years of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or Mechanical equivalent.
• Experience in handling both consultants and clients will be added advantage
• Strong working knowledge of relevant codes of practice, building regulations, and authority submission and approval procedures.
• Proficiency in engineering design software and analysis tools.
• Excellent communication, collaboration, and interpersonal skills.
• Ability to manage multiple tasks effectively and prioritise deadlines.

Position: Project Engineer (Civil and Structural)

Responsibilities:

· To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.

· Prepare method statements, design plans, and specifications.

· Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.

· Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.

· Determine project requirements and estimate resources such as manpower, materials and equipment.

· Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.

· Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.

· Other job duties as assigned.

Requirements:

• Candidate must possess a Bachelor's Degree in Engineering (Civil and Structural).
• Familiar and experience in ISO certifications and WSH.
• Excellent communication and interpersonal skills, both verbal and written in English.
• Good skills in using MS Office application, AUTOCAD and SolidWorks.
• At least 2 years of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or Mechanical equivalent.
• Experience in handling both consultants and clients will be added advantage
• Strong working knowledge of relevant codes of practice, building regulations, and authority submission and approval procedures.
• Proficiency in engineering design software and analysis tools.
• Excellent communication, collaboration, and interpersonal skills.
• Ability to manage multiple tasks effectively and prioritise deadlines.