Role and Responsibilities:

• Mixed-Signal IC (MEMS Interface) Design Engineer will be responsible for the design and development of capacitive and/or piezoelectric MEMS interface ASICs, including the required amplifiers, ADCs, filters and control logic, with characteristic high impedance inputs, ultra low power, low noise circuits etc .
• The responsibility of the Senior Mixed-Signal IC Design Engineer includes scheduling, design, simulation and layout of mixed-signal circuit blocks, including pre- and post-silicon verification

Requirements:

• Minimum BSEE with hands-on experience in IC Design flow.
• Familiarity with modern EDA tools such as Cadence, Mentor, Synopsys etc.
• Have working knowledge in analog building blocks such as bandgap reference, LDO, amplifiers, low noise amplifiers
• Understanding of ADC topologies eg Delta-Sigma, SAR, flash, integrating etc … advantageous
• A good team player with good communication skills
• Enthusiastic and independent worker.
• Willing to work in Tampines

Roles & Responsibilities
• Work on process characterization & development in the most advanced & new logic & specialty technologies
• Evaluate new tool/process to meet future technology requirements
• Coordinate with cross-functional modules to set up the process for customers and ensure process robustness for Fab manufacturing and production

Requirements
• PhD / Masters / Degree in Electrical / Electronics / Physics / Chemical Engineering
• More than 6 years relevant fab experience
• Prior 200mm/300mm R&D experience would be added advantage
• Good interpersonal & communication skills

Job Responsibilities:

· Product yield improvement and maintenance.

· New product and process pilot run. Device and process development to meet customers’ requirement.

· Introduction of new customer device into the FAB.

· Experiment design process margin improve SOP set up and system maintenance.

Job Requirements:

· Bachelor's Degree / Master's Degree in Electrical / Electronics / Physics / Chemical Engineering / Material science & engineering.

· Excellent Communication & Inter-Personal skill

· Must Possess Positive attitude, Self –Starter & Team Player

· Must have a good understanding of device physic and CMOS fabrication processes.

· Willing to take an extra effort to complete the task on schedule.

Position : Sales & Project Engineer (Equipment) – Up to $4,000 Basic – Boon Lay - No Experience Required!

Location : Boon Lay

Working hours : 5 Days Work Week – 8.45 AM to 6.15 PM

Salary (commensurate with experience): Up to $4,500 + Performance Bonus + Medical & Dental + Hospital Insurance + Company Van provided

Duration : Permanent

Industry : Supply of Equipment for Key Environmental Protection Projects

Main Responsibilities:

• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Detail work includes managing and interpreting customers’ requirements by talking to them and assessing equipment needs, preparing and delivering of sales proposals, technical presentations, show how the company’s products are better than the competitors and following up with suppliers and stake holders.
• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Detail work includes managing and interpreting customers’ requirements by talking to them and assessing equipment needs, preparing and delivering of sales proposals, technical presentations, show how the company’s products are better than the competitors and following up with suppliers and stake holders.
• Execute and follow through the sales plan set by the manager with the aim to expand the company’s customer base and ensure its strong presence in Singapore.
• Work as a team to gather information to submit tender.
• Continuously improve on own’s knowledge on supplier’s products with the aim to introduce technology that add value to the customers.
• Review sales activities with the management on a weekly basis, including the status of prospective customers, plans to meet sales goals and status on deadlines.
• Working with the Sales Manager, produces report regularly to communicate with supplier on sales activities and status of project.
• Any other ad-hoc duties as assigned

Requirements:

• Minimum Diploma in Engineering
• Minimum 1 year of related experience or no experience is welcome too!
• Must posses Class 3 Driving License
• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only

Email to: [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Senior Consulting Manager (APAC)

Reg no.: R21101247 | EA No: 13C6684

Job Responsibilities:

· Responsible for Equipment Uptime, Productivity and CIP.

· Work in a cleanroom environment for long hours.

· In-charge of PM planning, Equipment Maintenance, and Parts Management.

· Co-work with Engineer to resolve equipment/line issues.

· To improve and enhance machine performance and upgrade machine capability

Job Requirements:

· Diploma or ITE in Electrical, Electronics, Mechanical, Materials or Engineering related field

· Excellent Communication & Inter-Personal skill

· Ability to work under pressure & in a Dynamic Environment

· Must be willing to perform night shift work

· Must Possess Positive attitude, Self Starter & Team Player

· Candidates without experience are welcome to apply

Job Responsibilities:

· Responsible for Equipment Uptime, Productivity and CIP.

· Work in a cleanroom environment for long hours.

· In-charge of PM planning, Equipment Maintenance, and Parts Management.

· Co-work with Engineer to resolve equipment/line issues.

· To improve and enhance machine performance and upgrade machine capability

Job Requirements:

· Diploma or ITE in Electrical, Electronics, Mechanical, Materials or Engineering related field

· Excellent Communication & Inter-Personal skill

· Ability to work under pressure & in a Dynamic Environment

· Must be willing to perform night shift work

· Must Possess Positive attitude, Self Starter & Team Player

· At least 5 years of working experiences in relevant industry

· Understand factory automation technology and equipment such as robots, automated guided-vehicles and computerized manufacturing systems, AMHS etc.

· Repair, troubleshoot advanced AMHS hardware, software, and interface problems, maintaining the system to ensure full functionality and reliability.

· Design, modify, implement and test automated machines, programs, jig and fixture to required job specification in an efficient and cost-effective manner. Lead in-house automation projects on layout, build, troubleshoot, repair and modify developmental and production equipment.

· Drive efficiency improvement using Lean Manufacturing approach to identify waste, improve/streamline process flow and automation improvements with team and/or with cross-functional team collaboration.

· Lead and maintain overall machine uptime, monitor machine utilization and OEE index by identifying and eliminating the causes for recurring issues with CAPA implementation.

· Setting up new machines, transferring of equipment to different plants and integration to existing system.

· Supervise installation crews and support the field installation work.

· Project management on cost, quality, scope, and schedule to ensure on timely delivery of the project and within budget.

· Participate in design and documentation reviews, update management on work progress and deviations.

· Keep abreast of the latest developments in industrial automation technology and introduce them to plant wide operations.

· Achieve cost savings and productivity improvements.

· Any ad hoc duties assigned by supervisor/ manager.

• Establish and upkeep inspection tools’ performance and capability, e.g. detection sensitivity, accuracy, and stability.

• Setup new or optimize inspection standards/recipe in accordance to each product’s specification and tool’s classification. Review inspection data and criteria to ensure accurate defect and grade judgment.

• Correlate inspection tools’ performance consistency across fleet; investigate yield loss factors, eliminate over-reject and false defect to improve judgement accuracy.

• Monitor and improve inspection tool’s KPIs, e.g. Machine utilization efficiency, unscheduled down time, processing rate, input qty, product ratio etc.

• Maintain system functionality and reliability. Liaise with external vendors on preventive maintenance, parts replacement, troubleshooting, improvement projects and coordinate with internal team for scheduling and allocation etc.

• Ensure documentation and records are well maintained and compliance to relevant industry or company standards.

• Manage internal budgeting and expenses for parts procurement, service support, repair, and maintenance. Ensure cost, quality, scope and schedule are managed within targets.

• Provide management updates and report on work progress and deviations, monthly review of manufacturing trends.

• Participate in any special projects/programs as and when assigned by supervisor. Work beyond regular working hours when necessary.

• Develop and implement inspection procedures. Train and educate users for basic tool settings and recovery.

• Keep abreast of latest developments in industry technology and trends. Evaluate and introduce new ideas to achieve cost savings and productivity improvements where applicable.

Other Responsibilities

• 24hrs support is required and onsite support as necessary.

Skills and Competencies Profile

• 3-5 years of working experience in semiconductor industry or clean room environment.

• Degree in Engineering.

• With hands-on working experience in optical inspection system, knowledgeable about defect standards for photomask industry or familiarity with SEMI standards is highly desirable.

• Interest in working with data analysis, statistical tools to identify gaps and opportunities for continual improvement.

• Knowledge in DOE / SPC / FMEA is necessary.

• Prior experience in auto defect classification / AI development will be added advantage.

• Ability to work independently with high level of initiative, yet a strong team player when working with various functional teams.

• Creative thinker who can demonstrate excellent organization, problem solving and analytical skills.

• Self-motivated and result oriented with strong written, interpersonal and communication skill.

.Supervise project team and sub-contractors to take positive actions and accountability for their assigned work and complete their works on time as per agreed.

· Monitor and train Project Engineer / Technician.

· Liase with Client, Consultants and Project team for planning, executive and completion of projects.

· Manage and supervise the team of technical staff and subcontractors carry out maintenance services, schedules, improvement works . To make sure standards of building performance, quality, time and cost schedules and safety complied.

· Leading monthly meetings and submission of routine reports.

· Oversea and overall responsible for works carried out by Junior Supervisors assigned.

· Responsible for keeping daily work schedule.

· Attend regular meetings with client , supplier and sub-contractors.

· Analyze, manage and track projects costs against budget

This role is based in Singapore, the Field Service Assistant Engineer (FSAE) will be responsible for commissioning, maintenance and troubleshooting of field instrumentation products.

Job Responsibilities:

• Providing technical support to field service teams
• Supporting Factory Acceptance test and Site Acceptance test
• Maintaining accurate and reliable service tool inventory
• Completing service documentation is completed in proper format and by due dates- this includes items such as timesheets, service/repair reports, follow ups, daily logs, expenses, etc.
• Ensuring proper storage of engineering documentation- drawings, version history, scope documents, RFI's
• Work in teams relative to trouble-shooting, debugging and integration responsibilities
• Good knowledge of vacuum machine operation and machine construction
• Experience in handling with high vacuum equipments, pumps, chillers, and compressors
• Able to interpret maintenance manuals, schematics, and wiring diagrams
• Submit timely documents of service activities and expenses

Requirements:

• Diploma / ITE Certificate in Instrumentation / CPT/ Electronics / Mechatronic Engineering
• 2 years of related experience in Instrumentation
• Team Player
• Effective verbal & written communication skills
• Japanese speaking will be an added advantage, but not mandatory.
• Good ownership & accountability

Who are we?

Product Software, Platform Services

Equinix is a global leader in interconnection and data center services, empowering businesses to connect their digital infrastructure securely and reliably. With a presence in more than 50 markets worldwide, Equinix provides cutting-edge solutions that enable companies to accelerate their digital transformation and thrive in today's interconnected world.

As we continue to prioritize the security of our customers' data and infrastructure, we are seeking a talented and driven Software Security Engineer to join our passionate team of experts at Equinix and help us maintain the highest level of security for our platform services that serve all Equinix’s products and customers.

Job Summary

As a Software Security Engineer at Equinix, you will play a pivotal role in enhancing the security posture of our software systems and services. Your expertise will be instrumental in safeguarding critical data and ensuring the uninterrupted operation of our platform services. You will collaborate closely with product and information security teams, as well as platform services’ engineering teams, architects, and other DevSecOps professionals across the organization.

Together, you will implement robust security measures, address potential vulnerabilities identified by InfoSec stakeholders, and promote security best practices throughout the software development lifecycle. This is a technical, hands-on engineering role designed for security specialists familiar with Java/Spring Boot and microservices architecture. Experience with distributed, highly automated environments and a developer’s understanding of security, coupled with a willingness to learn new concepts, are essential for success in this role.

Responsibilities

• Collaborate with internal InfoSec stakeholders to address security requirements and enhance security awareness across the organization

• Collaborate with platform services’ engineering teams to implement security practices into the software development process, ensuring secure coding standards, design principles, and threat mitigation strategies are followed

• Monitor and analyze security events and incidents, providing timely resolution and implementing preventive measures to protect against future threats

• Adhere to the defined SLOs to address the security vulnerabilities

• Conduct security training and awareness programs for developers and other team members to promote a security-conscious culture within the organization

• Contribute to the development and maintenance of security policies, procedures, and guidelines that align with industry best practices and regulatory requirements

• Conduct comprehensive security assessments, including code reviews, penetration testing, SAST/DAST scanning, and threat modeling, to identify and address potential security risks in the services that the platform team owns

• Manage configurations of security tools for platform services in alignment with other products and InfoSec

• Adopt and improve cloud and infrastructure security controls

• Assess the security of authentication, authorization, and encryption mechanisms to safeguard sensitive data and ensure secure access control.

• Actively research and keep abreast of the latest security threats, vulnerabilities, and industry best practices, and apply this knowledge to continuously improve our security strategies

Qualifications

• Minimum 7 years of professional engineering experience in Software Security , or a related field

• Minimum 5+ years of full-stack expertise in application design & development with Java technologies, with knowledge of Spring, JPA/Hibernate, Message Queues & Workflow Engines in a microservices architecture

• Strong hands-on ability to fixing vulnerable libraries/packages in Java, Spring Boot, ReactJS, NodeJS, Go, Kotlin, Message Queue frameworks or workflow engines

• Strong understanding of software security principles, secure coding practices, and common security vulnerabilities (OWASP Top 10, CWE, etc.)

• Proven work experience as a Software Security Engineer or similar role with a focus on securing large-scale, distributed software systems including secure configuration of AWS, docker, K8s, service mesh, and NACL configuration management

• Hands-on experience with security tools and frameworks for code analysis, vulnerability scanning, and penetration testing in software & network systems

• Hands-on experience with cloud security best practices and technologies using AWS

• Solid knowledge of network protocols, web application security, and data protection mechanisms

• Understanding of compliance frameworks like ISO, GDPR and SOC

• Demonstrated ability to collaborate effectively with cross-functional teams and communicate complex security issues to both technical and non-technical stakeholders

• Strong analytical and problem-solving skills with a keen eye for detail

• Passion for staying up-to-date with the latest security trends and technologies to proactively address emerging threats

• Apply now and be a key player in shaping the future of the security of Equinix’s platform services

Equinix is committed to ensuring that our employment process is open to all individuals, including those with a disability. If you are a qualified candidate and need assistance or an accommodation, please let us know by completing this form.

Equinix is an Equal Employment Opportunity and, in the U.S., an Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to unlawful consideration of race, color, religion, creed, national or ethnic origin, ancestry, place of birth, citizenship, sex, pregnancy / childbirth or related medical conditions, sexual orientation, gender identity or expression, marital or domestic partnership status, age, veteran or military status, physical or mental disability, medical condition, genetic information, political / organizational affiliation, status as a victim or family member of a victim of crime or abuse, or any other status protected by applicable law.

[What you will be working on]

Working in the Climate Mitigation Division, you will be part of a project team tasked to conduct the technical assessment of the eligibility of energy efficient equipment to be whitelisted under the Energy Efficiency Grant. The work includes

• Evaluating technical papers, suppliers test reports and literature to establish robust whitelisting technical criteria

• Analysing energy consumption data, efficiency ratings, and other relevant metrics to assess the potential energy savings and environmental benefits of whitelisted equipment

• Evaluating suppliers’ submissions to decide on equipment suitability for whitelist

• Working with and providing guidance to government agencies on whitelisting

• Drafting guidelines on whitelisting, energy audits and impact assessment

• Researching on latest energy/carbon efficient technologies and trends and updating the whitelist periodically

[What we are looking for]

• Degree in chemical, biomedical, mechanical or electrical engineering

• Certification as a Singapore Certified Energy Manager (SCEM), Energy Efficiency Opportunities Assessor, Professional Engineer or Chartered Engineer would be a significant advantage.

• Mature, independent and resourceful

• Good team player and strong interpersonal communication and writing skills

• Strong analytical abilities

• Able to meet tight deadlines and adapt quickly to changes

• Organised and able to multi-task

• Highly self-motivated

• Credible working experience in any of the following areas:

  • Research on advances in energy efficiency technology in Data Centre, local harbourcraft, construction, industrial sector and/or food services

  • Develop Measurement and Verification (M&V) methodologies for various industrial systems and conduct energy performance assessment (e.g. based on ISO 50002)

  • Develop and implement energy saving or energy efficiency improvement projects of key industrial processes and systems in one or more of the energy-intensive sub-sectors such as: chemicals, biomedical, water management and utilities; and generic energy intensive industrial systems such as heating, cooling and compressed air systems

• As part of the shortlisting process for this role, you may be required to complete a medical declaration and/or undergo further assessment.

Applicants will be updated on the status of their applications within 4 weeks of the closing date of this job posting.

• Perform Corrective and Preventive Maintenance of wafer fab manufacturing equipment.
• Support the running of production in the module and ensure the readiness for production
• Maintain 6S practices in the Fab and maintenance support areas
• Participate and follow up on continuous improvement projects
• Provide clear and accurate pass down of line issues and documentation

Requirement

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• No work experience required.
• Preferably Entry Level specialized in Engineering - Mechanical/Automotive or equivalent.
• Work overtime during weekends and public holidays
• Working in cleanroom

• Position :Project Engineer
• Location : Islandswide- Office in Outram
• Working hours : 5 days work week;(8.30am, -6.00pm)
• Salary (commensurate with experience) : Up to $5700 + AWS + Overtime + Performance Bonus + $60 Mobile reimbursement + Birthday leave + Health insurance
• Duration : Permanent
• Industry : Security system

Main responsibilities:

• Lead and direct projects and ensure they are directed towards a common objective
• Engage and communicate with stakeholders to deliver project milestones and comply with strict deadlines
• Ensure client satisfaction and manage escalations, acting as single point of contact to the client
• Ensure that the project delivers as-sold solution, remains within the baseline budget and is delivered on time whilst maintaining quality criteria and client satisfaction
• Coordinate activities of the project teams through task delegation, resource assignment and programme management
• Ensure proper documentation is in order
• Any other duties as assigned

Requirement:

• Minimum Diploma in Electronics & Communication Engineering or related field
• Preferably with 3 years’ relevant work experience, or entry level candidates in relevant field of study
• Basic technical knowledge on ELV, Automation, Networking and Security Systems (CCTV, Card Access, Alarm System) will be an advantage
• Candidates from the same industry will be highly preferred.

Email to [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We DO NOT charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Deputy Consulting Director (APAC)

Reg no.: R2090601 | EA No: 13C6684

• Position : Sales Engineer - (Industrial Piping//Have own car/Outdoor) - Up to $5000 + Bonus
• Location : West - Tuas (Not required to report to office everyday)
• Working hours : Monday to Friday | 8.30am - 5.30pm
• Salary (commensurate with experience) : Up to $5000 (based on experience & qualifications) +Average of 2 Months Bonus + Claimable Transport Expenses + Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Industrial Piping

Main Responsibilities:

• Service existing customers and develop new clients to expand company market share for Industrial product portfolio in a designated region
• To promote and market all Industrial products on agreed quarterly and annual target volume.
• Specifying of company’s product to all relevant clients, consultants, engineering companies, design companies and end user.
• Establishing contact with consultants, contractors, EPCs and project owners
• Managing and interpreting customer requirements ; Negotiating tender and contract terms
• Offering after-sales support services to customers
• Preparing weekly reports and call plan to the general manager
• Making technical presentations and demonstrating how a product will meet client needs
• Offer pre-tender technical assistance and product education to the client
• Compile lists of prospective customers and projects for use as sales leads.
• Follow up project activities and update project lists.

Requirements:

• Diploma in mechanical or Chemical engineering with at least 1-2 years of industrial sales experience
• Experience in water treatment, chemical, Semiconductor and utility segments are an added advantage
• Bilingual in English and Mandarin to communicate with Associates who can only converse in Mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

1. Leadership and Management: Quality Manager requires strong leadership committed to quality improvement. Leaders set the vision, goals, and strategies for TQE implementation, allocate resources, and provide support and guidance to employees.
2. Quality Planning: This involves setting quality objectives, identifying customer requirements, establishing processes to meet those requirements, and developing plans to achieve continuous improvement.
3. Training and Education: Quality Manager emphasizes the importance of training and educating employees at all levels of the organization to ensure they understand quality concepts, tools, and techniques, and can contribute effectively to improvement efforts.
4. Quality Control: Monitoring and measuring processes and outputs to ensure they meet quality standards. This may involve statistical process control, inspections, audits, and other quality control techniques.
5. Quality Improvement: Identifying opportunities for improvement, analyzing root causes of problems, implementing corrective and preventive actions, and continuously striving to enhance processes and products/services.
6. Customer Focus: Understanding customer needs and expectations, gathering feedback, and using it to improve products/services and enhance customer satisfaction.
7. Supplier Management: Working closely with suppliers to ensure they meet quality standards and deliver high-quality inputs, materials, and components.
8. Employee Involvement and Empowerment: Encouraging and empowering employees to participate in quality improvement efforts, share their ideas and suggestions, and take ownership of quality-related activities.
9. Measurement and Analysis: Collecting and analyzing data to track performance, identify trends, measure progress toward quality objectives, and make data-driven decisions.
10. Continuous Improvement: Establishing a culture of continuous improvement where all employees are encouraged to seek opportunities for improvement, experiment with new ideas, and learn from successes and failures.
11. Communication and Collaboration: Facilitating open communication and collaboration across departments and levels of the organization to ensure alignment of quality goals and efforts.
12. Documentation and Documentation Control: Maintaining accurate records of quality-related activities, processes, and outcomes, and ensuring proper documentation control to prevent errors and ensure compliance with quality standards and regulations such as ISO 9001-2015.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Equipment Principal Engineer to be part of our Diffusion Department diverse team of talent.

What you will be working on:

• Responsible for daily operations in the Diffusion CMP Equipment Module
• Perform corrective and preventive maintenance on equipment to maintain good quality and productivity performance
• Provide 24×7 support for troubleshooting equipment and problem solving in Factory operations floor
• Maintain documentations for equipment installation, maintenance and troubleshooting procedures for reference purposes
• Develop continuous improvement to enhance equipment reliability and cost of ownership.
• Drive innovation in factory automation, processes and systems to improve productivity
• Coordinate, supervise and develop a team of high performance equipment engineers

More About You:

• Degree in Chemical / Electrical and Electronics / Materials / Mechanical / Microelectronics / Physics or equivalent
• Minimum 8 years working experience in CMP equipment or related module
• Familiar with Mirra polishing tools and DNS Scrubber
• Highly motivated and strong team player
• Possesses good communication and interpersonal skills
• Quality first mindset and strong analytical, problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

1. Able to handle Audit & ISO 9001-2005
2. Leadership and Management: Total Quality Engineer requires strong leadership committed to quality improvement. Leaders set the vision, goals, and strategies for TQE implementation, allocate resources, and provide support and guidance to employees.
3. Quality Planning: This involves setting quality objectives, identifying customer requirements, establishing processes to meet those requirements, and developing plans to achieve continuous improvement.
4. Training and Education: TQM emphasizes the importance of training and educating employees at all levels of the organization to ensure they understand quality concepts, tools, and techniques, and can contribute effectively to improvement efforts.
5. Quality Control: Monitoring and measuring processes and outputs to ensure they meet quality standards. This may involve statistical process control, inspections, audits, and other quality control techniques.
6. Quality Improvement: Identifying opportunities for improvement, analyzing root causes of problems, implementing corrective and preventive actions, and continuously striving to enhance processes and products/services.
7. Customer Focus: Understanding customer needs and expectations, gathering feedback, and using it to improve products/services and enhance customer satisfaction.
8. Supplier Management: Working closely with suppliers to ensure they meet quality standards and deliver high-quality inputs, materials, and components.
9. Employee Involvement and Empowerment: Encouraging and empowering employees to participate in quality improvement efforts, share their ideas and suggestions, and take ownership of quality-related activities.
10. Measurement and Analysis: Collecting and analyzing data to track performance, identify trends, measure progress toward quality objectives, and make data-driven decisions.
11. Continuous Improvement: Establishing a culture of continuous improvement where all employees are encouraged to seek opportunities for improvement, experiment with new ideas, and learn from successes and failures.
12. Communication and Collaboration: Facilitating open communication and collaboration across departments and levels of the organization to ensure alignment of quality goals and efforts.
13. Documentation and Documentation Control: Maintaining accurate records of quality-related activities, processes, and outcomes, and ensuring proper documentation control to prevent errors and ensure compliance with quality standards and regulations.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer/ Senior Engineer to be part of our Facilities department diverse team of talent. You will be the Subject-Matter-Expert for both the UPW & Chemical Systems.

What you will be working on:

• Plan and execute preventive and corrective maintenance activities for chemical, slurry and gas systems including chemical waste collection systems to ensure maximum equipment uptime and reliability.\
• Manage on-site Total Gas and Chemical Management (TGCM) and Bulk Gas Plant contractors to ensure excellence in operations, maintenance, quality standards and safety compliance.
• Respond to issue and perform troubleshooting with on-site TGCM team, Bulk Gas Plant operations team and contractors.
• Work with Manufacturing and Quality teams on excursion root cause identification, elimination and prevention.
• Initiate, evaluate, plan, design and supervise all improvement or upgrading or new projects for chemical, slurry, gas and chemical waste system.
• Include good design practice for state-of-the-art system designs, system capacity and capability analysis, planning for future requirements, and code compliance.
• Work in a team effort with other engineering, operations, maintenance, and construction disciplines to provide detailed designs and specifications for the installation of new capital equipment and systems.
• Identify and implement new technologies for chemical, slurry and gas systems for process breakthrough.
• Carry out cost estimates, analysis, cost and schedule estimates as well as justification of proposed projects.
• Responsible for maintaining various administrative and engineering database in support of job tracking, engineering data, and costing.
• Provide support for new chemical and gas evaluations.
• Plan and execute specialty gas system release/unhooking.
• Review and improve Operation and Maintenance Standard Operating Procedure and Risk Assessment.
• Support ISEP and Facilities operations concerning chemical, slurry and gas management/operations/storage/maintenance works.
• Carry out FMEAs (Failure Model and Effect Analysis), eliminate single points of failure and mitigate risks.
• Analyze systems to identify improvements that will result in better performance, efficiency gains, reduced maintenance, and cost savings.
• Work with Quality department to ensure the quality of chemicals, slurries and spec gas.
• Be aware of and perform all works in accordance with company safety guidelines.
• Benchmark with other Micron sites on operational, procedural, engineering, and design BKM of Facilities buildings and systems.

More About You:

• Master/ Degree in Chemical Engineering
• Min 4 years of relevant experience in Semiconductor Wafer Fab environment
• Hands-on experience in day-to-day operation and maintenance is essential
• Functional / Technical Skills and Knowledges:
• Operation and maintenance of Ultrapure Water, Wastewater, Chemical, Gas and Bulk Gas Systems

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Associate Engineer to be part of our Etch department diverse team of talent.

What you will be working on:

• To assist engineers to develop, sustain and improve process capability indices to meet operations goals
• Perform shift duties to support the running of Production in the module and ensure that process integrity for machines is in place for production
• Assist engineers in the qualification and fine tuning of processes for production
• Trouble-shoot process related issues and minimize the time lots on hold
• Create job-files for metrology tools for production set-up, and housekeeping of files
• Monitor and improve on the qualified process using SPC and other statistical tools
• Assist in implementing process improvement projects
• Maintain a good audit system for ISO requirements, internal and QA audit on process documentation
• Participate in continuous improvement programs to improve productivity and output quality of the module

More About You:

• Diploma in Electrical/ Electronics/ Mechatronics/ Mechanical/ Microelectronics/ Chemical Process Technology or equivalent preferred
• Candidates without experience are also welcome to apply
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, electrical/ pneumatic/ hydraulic control system, digital principle, wafer fabrication processes, pump and vacuum system and electrical wiring system
• Good Team Player
• Good Problem-Solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant law

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We're searching for Associate Engineer to be part of our Furnace Equipment department diverse team of talents.You will be responsible to assist the Engineers to improve and sustain equipment performance and Cpk indices to meet operations goals

What you will be working on:

• Perform 12-hour shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production
• Perform scheduled preventive maintenance (PM) and calibration on a timely basis
• Assist Engineers in the installation and hook-up of new equipment
• Trouble-shoot equipment-related issues and minimize equipment downtime
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Min 2 years of relevant working experience
• Direct experience in Furnace Equipment will be advantage
• Willing to work in 12-hours shift

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We're searching for Principal Engineer to be part of our Diffusion WET diverse team of talents. You will be responsible for daily operations in the Diffusion WET Equipment modules.

What you will be working on:

• Perform corrective & preventive maintenance on equipment to maintain good quality & productivity performance.
• Provide 24×7 support for troubleshooting equipment & problem solving in Factory operations floor.
• Maintain documentations for equipment installation, maintenance and troubleshooting procedures for reference purposes.
• Develop continuous improvement to enhance equipment reliability and cost of ownership.
• Drive innovation in factory automation, processes and systems to improve productivity.
• Coordinate, supervise & develop a team of high performance equipment engineers.

More about you:

• Degree in Chemical/Electrical & Electronics/Materials/Mechanical/Microelectronics/Physics or equivalent
• Minimum 3 years working experience in WET equipment or related module
• Highly motivated & strong team player
• Possesses good communication and interpersonal skills
• Quality 1st mindset & strong analytical, problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Senior/ Associate Engineer to be part of our Facilities diverse team of talent. You will trouble-shoot and service normalization on systems in charge such as buildings issues, lifts etc.

What you will be working on:

• Trouble-shoot and service normalization on systems in charge such as buildings issues, lifts, plumbing and sanitary, landscaping and housekeeping work
• Perform scheduled preventive maintenance (PM) and system breakdown maintenance (BM)
• Perform 1st line incident handling, breakdown repair works as well as actively participate in incident
• Perform inspection rounds on 6S and supervision of contractor works on building services
• Ensure that all quality expectations are up held to meet better than expected customer request
• Create and innovate new methods for continuous improvement to current Procedures to attain best in class quality and cost
• Participate in Improvement teams to enhance system improvements
• Maintain good housekeeping in all buildings, ensure good safety practice and also safe custody of keys, tools, documentation, equipment and other properties belonging to the company
• Ensure all site safety compliance are met as part of daily responsibility and expectations
• Continuously seek to enhance on existing safety procedures for continuous improvement
• Plan, lead and supervise work carried out by vendors
• Provide leadership in first line of trouble shooting of any process inadequacy

More about you:

• Candidate must possess a Diploma or Advanced/Higher/Graduate Diploma in Engineering (Material Science), Engineering (Mechanical), Engineering (Electrical/Electronic), Engineering (Environmental/Health/Safety), Engineering (Industrial) or equivalent
• At least 2 year(s) of working experience in the related field is required
• Added advantage for candidate(s) with experience working in Large Industrial Complex, Semiconductor environment
• Resourceful and has initiative
• Willing to work on rotating shift

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Manufacturing diverse team of talent. You will be responsible for supervising and coordinating production activities to meet daily and monthly manufacturing goals.

What you will be working on:

• Supervise and coordinate production activities to meet daily and monthly manufacturing goals through the efficient use of manpower, material, and machine; together with proficient methodologies, in a hazardous-free and healthy working environment.
• Plan, strategize and monitor the movement of WIP for maximum throughput, minimum idle time and maintain line linearity.
• Solicit Engineering support to ensure tight focus on areas and variance requiring immediate attention.
• Resolve and handle line-related issues / preventive maintenance and to understand all equipment capacities / constraints so as to identify, handle and resolve bottleneck situations.
• Mentor and train all Manufacturing Leaders and Assistants to develop skills required for efficient MFG operations.
• Execute improvement programs in manufacturing operations in his/her Section.
• Facilitate and participate in quality, productivity and cost reduction improvement.
• Ensure safety, discipline and housekeeping compliance by all personnel and take actions on violators.
• Ensure proper documentation and data-integrity.
• Perform shift duties to support production, as required by Section Manager.

More About You:

• Degree in Science or Engineering
• Preferably 1-3 years relevant wafer fab manufacturing experience.
• Candidates with no experience will be considered for junior role, training will be provided
• Interest in Wafer Fabrication Manufacturing
• Possess leadership quality
• Good interpersonal skills
• Team player
• Good analytical and planning skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Senior Engineer to be part of our IT Department diverse team of talent. You will be responsible to Engineering Analytic Systems Software development, Design and Support.

What you will be working on:

• Responsible for system design, development and support of the application systems.
• Work closely with users, vendors and internal team for system requirement analysis, effort estimation, design, development, implementation and testing on IT application project.
• Responsible for core Software Development and deliver in timely manner
• Managing and develop of Engineering Data Analysis Systems
• Managing and develop Engineering data tracks
• Managing and develop DataMart and data warehouse applications
• Implement Service Request related to internal applications
• Provide support for Internal IT department and External customers

More About You:

• Candidate must possess at least a Diploma or Bachelor's Degree or Professional Degree in Computer Science/ Engineering/ Information Technology or equivalent
• Minimum 3 years of relevant experiences in Microsoft .Net Platform C#.Net and python.
• Minimum 3 years of relevant experiences in MS SQL Server, Oracle, Stored Procedure, Function, Trigger and etc.

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.