Job Description

1. Perform site planning, coordination & inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met.

2. Support Quantity Surveyors in conducting site measurement and inspections.

3. Able to plan / coordinate site works and resolve drawing details and discrepancies.

4. Any other tasks assigned by the management.

Requirement

1. Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil/Structural) or equivalent.

2. Minimum 5 years construction experience with experience in civil construction industry.

3. Be able to work independently with minimum guidance and able to work within tight deadlines.

4. Bilingual in English and Mandarin is preferable

Interested applicants, please remember to include the following details for us to conduct a more effective job-matching for you:

1. Work experiences and job responsibilities

2. Current and Expected salary

3. Reason for leaving

4. Date of availability

5. Education background

6. Recent photo

- Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

- Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

- Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

- To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

- Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

- Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

- Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

- Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

- To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

- To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

- To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

- Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

- To be actively involved with quality management system of the company.

- Perform any other duties as assigned by higher management or superior.

Job Requirements:

- Degree or Diploma holder in Mechanical Engineering or equivalent.

- Have more than 3 years or dible experiences in ACMV system.

- Proficient in Microsoft Office, AutoCAD and BIM.

- Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment.

- Strong analytical and problem-solving skills, with the ability to identify and resolve complex issues.

We regret that only the shortlisted candidates will be notified

whatsapp: 85986715

singaporean,PR can apply

Daily cosmetic raw material production platform: quality director

Location: Johor Bahru, Malaysia

Recruitment Position： Quality Director

Job Responsibilities

1 review and approve all appropriate quality-related documents;

2 Releasing or rejecting all APIs. Releasing or rejecting intermediates for use outside the control of the manufacturing company;

3 Establishing a system to release or reject raw materials, intermediates, packaging and labelling materials;

4 Making sure that critical deviations are investigated and resolved;

5 Approving all specifications and master production instructions;

6 Approving all procedures impacting the quality of intermediates or APIs;

7 Making sure that internal audits (self-inspections) are performed;

8 Approving intermediate and API contract manufacturers;

9 Approving changes that potentially impact intermediate or API quality;

10 Reviewing and approving validation protocols and reports;

11 Making sure that quality related complaints are investigated and resolved;

12 Making sure that effective systems are used for maintaining and calibrating critical equipment;

13 Making sure that materials are appropriately tested and the results are reported;

14 Making sure that there is stability data to support retest or expiry dates and storage conditions on APIs and/or intermediates where appropriate;

15 Performing product quality reviews.

Job Requirements

1 University or academic degree in chemistry, biology, pharmacy or equivalent.

2 Proficient in English required.

3 Minimum of 7 years’ experience in pharmaceutical factory, in Manufacturing, and QA Manager for 5 Years at least; with a thorough knowledge in chemistry, pharmacy and/or biotechnology.

4 Familiar with ICH Q7 guidelines and have accepted FDA, EDQM audit experience.

5 Profound experience leading sophisticated quality organizations in a diverse global matrix environment，Ability to speak up and to take Quality decisions during challenging situation.

6 Strong leadership skills with excellent interpersonal, communication abilities.

7. can speak simple chinese and english

Salary: $10000-$15000 singapore dollar

Jie Shun Jia | EA License No.: 24C2410 | EA Registration No.: R24124440 (FENG YINGJIE)

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Diploma in Electrical Engineering or equivalent
• Good interpersonal and communication skills

Job Description:

• Lead metal Additive Manufacturing process, materials and application development and service projects, including material selection, part design, parameterization, prototyping and manufacturing of AM parts
• Scoping, managing, and executing of customer projects within budget and schedule, ensure deliverables, objectives and customer requirements are met
• Provide technical consultation and support to customer enquiries relating to metal AM application
• Operation of metal AM machines and auxiliary equipment, including maintenance, troubleshooting, risk assessment, and managing of AM lab
• Documentation of project reports, engineering reports, technical data, process know-hows; development of SOPs and best practices for AM equipment and processes
• Support market promotion and customer engagement; participate in local or overseas industry exhibitions, tradeshows, conferences, and seminars; facilitate lab tours, demos and presentations
• Provide technical content to support creation of marketing collaterals such as demo parts, product videos, whitepaper, etc.

Responsibilities:

• To achieve R&D development goals in order to fulfill business needs and support company’s growth.
• Proactively provide engineering support and solutions to relevant department such as manufacturing, customer service, sales, application
• Adhere strictly to job process defined by Makino's QEHS policy Engineering to achieve and comply to Makino quality standard
• Contribute to improve Makino technical core competency through continuous learning and innovation
• Share knowledge with relevant people to help create a knowledge bank and learning organization
• Independently and proactively develop and validate new unique engineering designs
• Mentor and guide junior Engineers/Technical Officers
• New hire is required to undergo specific tests for who are exposed to certain occupational hazards.

Requirements:

• Bachelor's Degree / Master / PHD in Engineering, Mechanical, Materials, Aerospace or equivalent
• Min 5 years of working experience with metal Additive Manufacturing process and application development
• Hands-on experience with LMD/DED machine operation
• Proficient in data preparation, CAD/CAM and toolpath generation for LMD/DED process
• Strong understanding of LMD/DED process, materials, and key process variables
• Experience with parameters development, material characterization, or process simulation
• Familiar with metal AM process chain
• Keen on hands-on work
• Fast learner and agile, able to adapt to dynamic work environment
• Able to work independently and self-motivated

Our client is a leading logistics company. They are looking for a Senior Quality Executive to assist their Quality team for the next phrase of their business. They are located at West of Singapore– easily accessible. The Senior Quality Executive is responsible for:

Duties

• Establish, update, and uphold the Quality and Environmental Management System (QEMS) in alignment with ISO 9001:2015, collaborating with stakeholders to create and revise relevant procedures.
• Track quality trends and performance metrics, ensuring continuous improvement within the organization.
• Manage internal and external ISO 9001:2015 certification processes, audits, and compliance to meet all required standards and objectives.
• Communicate quality assurance strategies and processes across the organization through quality programs, training, and awareness initiatives.
• Lead monthly quality review meetings, generate performance reports, and conduct site inspections to ensure compliance with quality standards.
• Participate in customer audits, lead investigations into quality issues, manage supplier onboarding, and address improvement areas based on non-conformities.

Requirements

• Min Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• Min 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

Our client is a leading logistics company. They are looking for a Senior Quality Executive to assist their Quality team for the next phrase of their business. They are located at West of Singapore– easily accessible. The Senior Quality Executive is responsible for:

Duties

• Establish, update, and uphold the Quality and Environmental Management System (QEMS) in alignment with ISO 9001:2015, collaborating with stakeholders to create and revise relevant procedures.
• Track quality trends and performance metrics, ensuring continuous improvement within the organization.
• Manage internal and external ISO 9001:2015 certification processes, audits, and compliance to meet all required standards and objectives.
• Communicate quality assurance strategies and processes across the organization through quality programs, training, and awareness initiatives.
• Lead monthly quality review meetings, generate performance reports, and conduct site inspections to ensure compliance with quality standards.
• Participate in customer audits, lead investigations into quality issues, manage supplier onboarding, and address improvement areas based on non-conformities.

Requirements

• Min Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• Min 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

Job Title: Software Quality Engineer - Senior Consultant

Salary: $9,800.00

Responsibilities:

• Lead large-scale and complex testing efforts, ensuring that software products meet the highest quality standards.
• Own the test strategy, test execution, and test automation for critical software projects.
• Drive the adoption of best practices for testing and automation across the organization.
• Lead and mentor a team of testers, fostering collaboration and ensuring knowledge sharing.
• Provide expertise in areas such as application performance and security testing.
• Take ownership of the test automation framework and continuously improve it based on feedback and emerging trends.

Experience and Skills Needed:

• More than 6 years of experience in software testing, including a deep focus on exploratory testing and automation.
• Strong leadership skills and the ability to drive test strategies and innovations across teams.
• Advanced knowledge of Agile testing practices and tools.
• Extensive experience with a variety of testing tools and frameworks, including those mentioned above.
• Ability to drive continuous improvement initiatives in testing processes and tools.

Responsibilities:

• Test Strategy Development:Assist Product Owner and Business Analyst in crafting user story acceptance criteria.
  Analyze and decompose complex software systems, designing a comprehensive test strategy.
  Research emerging technologies to develop innovative test automation frameworks.
  
• Test Execution & Automation:Develop test suites, scenarios, and cases to ensure robust quality assurance.
  Take a risk-based approach to test automation, ensuring optimal coverage.
  Conduct time-boxed exploratory testing to identify potential issues.
  Maintain regression test suites in the nightly QA build and continuously refine the smoke test suite in the Development CI environment.
  
• Collaboration & Testing Leadership:Lead system integration testing in collaboration with other system owners.
  Manage user acceptance testing (UAT), ensuring all testing requirements are met.
  Oversee the defect lifecycle and manage test artifacts and repositories.
  
• Continuous Improvement:Drive continuous improvement in agile testing practices and tools.
  Take on secondary roles such as Application Performance Engineer or Application Security Engineer, as needed.
  

Experience and Skills Needed:

• Minimum of 3 years of experience in exploratory testing and regression test automation.
• Strong analytical skills with a focus on detail.
• Excellent interpersonal skills, including tactfulness and effective communication.
• Experience working in an Agile development environment is an advantage.
• Familiarity with test automation tools such as Robot Framework, SikuliX, Selenium, Playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC, and Sprinter), or EggPlant is a plus.
• Certifications such as Certified Software Testing Professional (CSTP) or Certified Software Quality Analyst (CSQA) are highly beneficial.
• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines.

OVERALL PURPOSE OF THE ROLE:

Supporting the Group Director, Marine Assurance in the continual drive and promotion of the highest standards of service delivery through the effective implementation of the HSSEQ Excellence Charter, V.MS, Assurance programs, audit standards, and associated policies, including accountability for;

• Acting as V.’s subject matter expert on Dry Bulk operations, compliance, and assurance, to ensure V.’s policies, processes, and operating standards remain up-to-date at all times, and are continually improved to meet customer, industry, and stakeholder demands

• In executing above, ensure that V.’s Assurance programs (onshore and onboard) are accurately and consistently reflecting the ‘real world’ demands and expectations of external audit and inspection programs, creating maximum internal learning and improvement opportunities, and overall service delivery performance

• Support in execution of annual Segment Engagement Plans that target customers, stakeholders, and industry bodies, ensuring consistent and proactive engagement that promotes and continually improves V.’s commercial successes within the Dry Bulk segment, globally

• Act as V.’s Group-level representative in Australia, ensuring proactive and effective engagement with AMSA and relevant local authorities, at regular intervals or when required on matters of PSC compliance or incident response.

KEY RESPONSIBILITIES:

Promoting a strong, proactive Culture of HSSEQ Excellence, through;

• Continually providing strong, visible, and proactive examples of HSSEQ leadership

• Promotion of a transparent & value-adding Marine Assurance culture across the Group

• Promotion of outstanding operational standards of excellence, especially to customers & external stakeholders

• Acting as change agent for the continual improvement of the Group’s service delivery performances

Marine Assurance Standards

Provide subject matter expertise on the development and continual improvement of policies, processes, and marine assurance standards for the relevant industry segment, ensuring the V.MS and all associated operational practices meet industry standards and maximise service delivery and commercial success for our customers.

Marine Assurance Programs

Provide subject matter expertise on the development and continual improvement of V.Assurance programs and inspections for the relevant industry segment, ensuring such operational practices meet industry standards and maximise service delivery and commercial success for our customers.

Customer & Segment Engagement

Supporting the Group Director, Marine Assurance in the planning, execution, and reporting of annual Segment Engagement Plans that grow V.s profile and customer engagement in the relevant industry segment, and supports our Commercial activities in remaining proactive and aware of customer and segment needs, and expectations.

PSC & Industry Engagement

Acting as a Group-level leadership representative with AMSA, an other regional PSC regimes as directed, to maintain working relationships at an equivalent level, ensuring V. is continually and proactively engaged in support of safe operations and effective service delivery, and supporting V. Executive Team members in securing and delivering additional such meetings and engagements, as required.

Incident Response

Acting as a Group-level leadership representative in event of incident for the interim period that relevant ShipMan MD/OD can reach the region to engage on behalf of DoC-holding office, and ensure that V.-managed crew and assets are engaged and cared-for during this period, and that V.’s interests are protected.

Incident Investigation

Where directed, provide subject matter expertise in investigation of all incidents where there are Marine Assurance impacts and/or learning opportunities, to ensure we maximise all relevant Marine Assurance learning opportunities, resulting in effective outcomes that drive continual improvement of related systems, processes, and policies.

SKILLS, QUALIFICATION AND EXPERIENCE REQUIRED

ESSENTIAL:

• Deep understanding of and experience in safe operations of Dry Bulk vessels

• Deep understanding of and experience in associated Dry Bulk vetting & inspection programs

• Excellent ability to make, maintain, and grow customer relations with key internal and external stakeholders

• Excellent ability to represent V. and themselves to the highest professional levels in external forums and stakeholder engagement events

• Ability to travel freely to/within Australia

• In-depth knowledge of industry standards, assurance & certification programs

• Significant experience in international compliance & certification programs

Significant experience in engaging and collaborating with multinational / multicultural teams.

DESIRABLE:

· Class 1 CoC (Deck or Engine)

· Good analytical and problem-solving skills

· Recognised academic or professional qualification in relevant field

· Willingness to travel

Existing relationships and good contacts with relevant industry stakeholders

• The Senior Supplier Quality Specialist will reports to the Supplier Quality Supervisor will be responsible to support the development and maintenance of Supplier Quality Management business processes to comply with all applicable regulatory requirements and Quality Policies and Procedures.
• You will ensure oversight on the site’s supplier quality and material release processes are executed in accordance to Quality Policies and Procedures

Major Responsibilities:

• Provide Leadership for the Supplier Quality team as a senior specialist in the absence of the manager and Supervisor
• Ensure compliance with applicable policies, processes and procedures, contributing to the execution of strategies and oversight of Supplier Quality programs
• Execute and provide oversight on procedures to ensure that incoming materials including raw materials and commodities received at our Company to meet approved company policies and processes.
• Manage investigations arising from materials nonconformity with cross functional team.
• Serves as the primary contact to review and follow up on Supplier Qualification documentation (e.g. Approved Supplier Lists, Quality Questionnaires, customer complaints, Supplier packages etc.) and activities (e.g. supplier audits, supplier review, supplier change notification etc.)
• Prepare, maintain and facilitate review of the GMP documentations (Quality Technical Agreement and Internal Quality Technical Agreement)
• Coordinate site supplier quality issues (such as deviations), audit assessments and subsequent follow-up actions.
• Support global supplier quality team initiatives or other site improvement projects. Perform review/audit of Incoming material inspection package which includes receiving, sampling and testing compliance. Completion of Incoming Raw Material checks and release and the administration of Quality Logs, e.g. QA Hold.Review / Approve material master data set up for new material introduction.

Requirements

• Min Diploma / Degree in any science / engineering courses
• Min 2 years of Supplier quality exp or handle complains before from suppliers

$4K to $5K

office hours

Pharma MNC

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Our Client is in the Aviation Industry. Due to their current expansion plan, they are looking for an Quality Engineer to join their team, in hopes of developing the current high performing team. They are located in the East.

Responsibilities;

• Ensure product and process quality by managing the Quality Management System (QMS) in compliance with government regulations, aviation authority standards, and customer requirements.
• Update and refine quality procedures and control instructions to align with operational and regulatory standards.
• Collaborate with customers, vendors, and suppliers to address non-conformance issues.
• Perform root cause analysis and implement corrective actions to reduce poor quality costs.
• Conduct internal audits to evaluate compliance with ISO 9001, AS9100, and NADCAP standards.
• Carry out vendor and on-site audits as required to ensure quality performance.
• Ensure strict adherence to customer and regulatory authority standards and specifications.
• Lead efforts to minimize the cost of poor quality and reduce scrap through effective quality management practices.
• Any ad-hoc duty as assigned

Requirement

• Min Degree in Mechanical or Aeronautical Engineering
• Min 2 years experience in ISO9001 / AS9100 Quality Management System and NADCAP process
• Experience and knowledge in fishbone diagrams, FMEA and 5-whys methodology
• Able to read and interpret technical and blue print drawings

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Job Description & Requirements

Job Responsibilities

• Assist the Construction Manager and Project Manager in the planning, coordination, and monitoring of daily project operations to ensure smooth execution.
• Liaise with consultants, sub-contractors, and relevant stakeholders to resolve project-related issues promptly.
• Conduct and participate in regular meetings with owners, clients, contractors, and sub-contractors to discuss project progress, challenges, and deliverables.
• Review and analyze technical drawings, identify discrepancies, and raise technical queries to ensure accuracy and alignment during project execution.
• Perform in-progress and joint inspections to verify that work complies with design specifications, quality standards, and regulatory requirements.
• Develop, update, and maintain the Project Quality Plan, ensuring adherence to the required quality benchmarks throughout the project lifecycle.
• Oversee the preparation and submission of progress reports, technical documentation, and work schedules.
• Support risk assessment activities, implementing mitigation strategies for potential project risks.
• Ensure compliance with safety, environmental, and regulatory standards at all project stages.
• Manage and optimize resources, including manpower, materials, and equipment, to achieve project objectives efficiently.

Requirements

• Educational Qualification:
  Degree/Diploma in Civil Engineering or an equivalent field.
• Professional Experience:Minimum 3–5 years of relevant experience in construction supervision and project management, preferably with exposure to LTA (Land Transport Authority) projects.
  Proven track record in handling projects of similar scale and complexity, with experience in planning and scheduling.
  
• Skills and Competencies: Strong interpersonal and communication skills to foster collaboration among stakeholders.
  Excellent organizational and time management skills with the ability to manage multiple priorities.
  Proficiency in construction planning software (e.g., Primavera P6, MS Project, CAD) and other technical tools.
  Deep understanding of construction methodologies, safety practices, and quality standards.
  Ability to interpret engineering drawings and specifications with attention to detail.
  Strong presentation skills to convey technical and project updates effectively.
  
• Additional Advantage: Candidates available to start work immediately or on short notice will be preferred.
  Certifications in workplace safety or project management (e.g., PMP, WSH certifications) are a plus.
  

What We Offer

• Opportunities to work on high-impact infrastructure projects.
• Collaborative work environment with opportunities for career advancement.
• Comprehensive benefits package, attractive company benefits.

Job Description:-

• Plan and execute work plans on site.
• Prepare weekly progress reports and weekly work plan on project work.
• Work with design engineers for as-built drawings, section drawings.
• Supervise and monitor workers / welders on site for installation or maintenance.
• attend site meetings with clients / architects and authorities on project technical matters.

Requirements:-

• Minmum Diploma in either mechanical or Mechatronics Engineering or other relevant discipline.
• Required skill(s), MS Office, MS Project AutoCad.
• Has work experience in construction sites and project management.
• Responsible team player with the ability to work independently in challenging projects and timelines.

• Plan and execute work plans on site.
• Prepare weekly progress reports and weekly work plan on project work.
• Work with design engineers for as-built drawings, section drawing.
• Work with purchaser to source & make orders for all materials required and purchase the required materials according to project timeline.
• Supervise and monitor workers / welders on site for installation or maintenance.
• Attend site meetings with clients / architects and authorities on project technical matter.

Requirement:-

• Minimum Dipoma and Degree in Mechanical Engineering.
• Required skill(s) MS Office, MS project, Autocad.
• Has work experience in consruction sites and project management.
• Responsible, detail-oriented and able to multi task.
• proactive team player with the ability to work independently in challenging projects and timelines.
• Possess Class 3 driving license will be an advantage.

Responsibility

• Co-ordinate and supervise site works and subcontractors.
• Keep track of the site schedule to ensure works are on time.
• Able to interpret drawings and calculations of site materials
• Liaise with QS to monitor work schedule , claim and Vos.
• Report to Construction Manager / Project Manager on site matters and progress of work.
• Attend to site meetings
• Compliance to safe work procedures and maintain good house-keeping

Requirements:

• At least Bachelor's Degree or equivalent in civil engineering or equivalent.
• At least 5 years experience in civil engineering , relevant experiences in construction of civil infrastructure project , LTA project.
• Practical experience and knowledge of tendering works
• Good command of English
• Able to draw 2D / 3D

1. Create simple lighting designs for external Design offices/Clients and Sales representative/Sales manager. Lighting designs may include:

• request analyses (availability of all necessary input parameters, if request is in accordance with norms, suggest alternative proposals in accordance with good lighting practise)   
• lighting calculations performed within in house or external lighting software,
• luminaire specifications and descriptions
• elaboration of alternative proposals
• technical application notes (technical reports),
• drawings with luminaire disposition and all necessary details and/or visualizations.

1. Provide simple lighting calculations according to the requirements:

• inputs parameters analyses
• perform lighting calculations and analyses with alternative proposals and/or competitor analyses.

1. Provide necessary support in creation of city lighting reconstruction studies:

• inputs parameters analyses (road geometry, existing lighting installation, road categorization),
• on-site data collection
• determination of typical street profiles in accordance with road geometry and lighting class
• perform lighting calculations and analyses with alternative proposals and/or competitor analyses.

Prepare street lighting categorization proposal, perform lighting calculations and analyses with alternative proposals in cooperation with direct Manager / responsible Sales rep/ Sales manager.

1. Consideration and application of the relevant lighting standards.

1. Develops, implements and/or delivers product training / presentations for Clients (e.g. Ulysse, training, ...).

1. Organize and perform on-site lighting trials and provides after-sales technical support in fine- tuning (e.g. decorative illumination).

Purpose

The Sales Engineer is responsible for driving revenue growth by leveraging technical expertise and sales acumen to promote and sell the company’s products and solutions. This role focuses on identifying customer needs, providing tailored technical solutions, and fostering strong customer relationships. The Sales Engineer acts as a bridge between the company’s technical capabilities and the customer’s requirements, ensuring customer satisfaction while achieving or exceeding sales targets. This position is open to candidates with a range of experience, from junior to senior levels, and may involve managerial responsibilities for more experienced candidates.

Job Duties:

Primary Responsibilities:

• Sales Strategy Execution: Implement and execute sales strategies to meet or exceed assigned revenue and profitability goals.
• Customer Acquisition: Proactively identify and pursue new customer accounts to expand the customer base.
• Sales Presentations & Negotiations: Conduct presentations to customers, negotiate sales contracts, and close deals effectively.
• Market Intelligence: Track market trends, competitor activities, pricing, and new product developments. Provide feedback to the Product Management team.
• Customer Enquiries & Proposals: Address customer inquiries promptly, prepare tailored proposals, and provide quotations.
• Relationship Management: Build, develop, and maintain strong business relationships with customers to ensure repeat business.
• Complaint Resolution: Work with the QA Team to resolve customer complaints and ensure customer satisfaction.
• Market Research & Analysis: Continuously monitor market developments and technological advancements to stay ahead of competition.

Secondary Responsibilities:

• Internal Collaboration: Work closely with the Product Management team to generate RFQs, convert quotations into sales orders, and ensure smooth project execution.
• Sales Reporting: Prepare regular sales reports and track progress against sales targets.
• Team Management (if applicable): Oversee and guide Sales and Customer Service teams to ensure effective sales execution.
• Travel: Willingness to travel internationally for customer visits and business development.
• Industry Knowledge: Maintain awareness of the optics manufacturing industry, its technologies, and market trends.

Experience:

· Proven track record in technical sales with strong communication, presentation, and negotiation skills.

· At least 2-5 years of relevant sales experience. Candidates with 5+ years of experience and demonstrated leadership/managerial skills may be considered for a managerial position.

· Experience in optics or engineering-related fields is a plus.

· Familiarity with market research and the ability to analyse customer needs and translate them into product solutions.

· Proficiency in Microsoft Suite (Excel, Word, PowerPoint) for reporting and communication.

· Ability to work independently and driven to meet sales targets.

· Experience in customer-facing roles and a customer-oriented mindset.

· Factory experience is advantageous.

Qualifications:

• Bachelor’s Degree or Professional Degree/Diploma in Engineering or a related field is required. Candidates with a Master’s or PhD are welcome to apply.
• Experience in industry sales is preferred; experience in precision optics is an advantage.
• A background in engineering is preferred, particularly with knowledge of optics or related technologies.

Other Requirements:

· Fluency in Englishand Mandarin (spoken and written) to communicate with customers in Asia, Europe, and the USA.

· Willingness to work across multiple time zones (Asia, Europe, USA).

· Overseas travel is a must.

KEY COMPETENCIES REQUIRED FOR THE JOB: (Core & Behavioural)

Core Competencies:

• Technical Knowledge: Strong understanding of the company’s product offerings and how they can meet customer needs.
• Sales Excellence: Demonstrated ability to drive sales and achieve targets through effective negotiations and customer relationship management.
• Market Awareness: Ability to track market trends, technological advancements, and competitor activities.

Behavioural Competencies:

• Proactive & Results-Oriented: Demonstrates initiative, works independently, and focuses on achieving business objectives.
• Problem Solving: Quickly resolves customer complaints and issues, ensuring positive outcomes.
• Team Collaboration: Effectively works with internal teams (e.g., Product Management, QA, Customer Service) to meet customer needs and close deals.
• Adaptability: Ability to adapt to changing market conditions and customer demands.
• Strong Work Ethic: Self-motivated, dependable, and committed to achieving personal and team sales goals.

We are representing our client who is a leading provider of power system solutions to customers from various industries not limited to industrial, medical, information technology etc in search of

Electrical Engineer

Responsibilities

• Leading product testing and failure analysis efforts to ensure quality and reliability.

• Conducting hands-on tests on switch mode power supply (SWPS) products, circuits, and components.

• Developing test plans and procedures.

• Designing test systems with software and hardware to achieve test automation.

• Collecting test data, generating test reports, and maintaining good documentation practices.

• Conducting FMEA to identify critical and high-risk electronic designs.

• Performing evaluation tests and risk mitigation.

• Conducting root cause analysis to identify failure mechanisms and derive countermeasures.

• Collaborating with cross-functional teams to sustain the product lifecycle.

Requirement

• Minimum Degree in Electronics/Electrical Engineering or equivalents.

• 5+ years of experience in developing, sustaining, manufacturing, or testing on electronic products, especially power electronics.

• Fundamental knowledge of switch mode power supply – topology, characterization, testing, simulation, safety, and compliance regulations.

• Able to interpret schematics and circuits, understand component functions and analyze their electrical stresses.

• Experienced in qualifying electronic components and systems, understand common processes and methods in electronics design and manufacturing.

• Hand-on skills in environmental testing and test automation, lab equipment and instruments.

• Conversant with EDA tools with Altium highly desirable.

Interested applicants, kindly forward a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required by current employer.

Join us on Telegram here: https://t.me/Searchstaffingjobs

Job Description:

• Work with application team on challenges to existing batch workflow in Automic and file transfer rule in IBM Sterling with tightened security and address BAU batch and file transfer issues.
• Support for Automic AWA and File Transfer BAU change requests, incidents, and IT projects.
• Support on Audit requirements for batch workflow in Automic and file transfer rule in IBM Sterling by providing detailed RFIs for the client Application systems.
• Support interface connectivity across client internal systems and connectivity with client external partners like Collection Agencies, Government Agencies etc.
• To perform SPS MSSL market trial on-boarding for the active Market Retailers as per User request.
• Support Automic Upgrade project for SIT and UAT Testing.
• Support the ITS SCO and applications team on SFX / Automic Skillset transformation by providing guidance in file transfer event setup and batch job design, creation, and modification.
• Automate the on-boarding and off-boarding trading partner in SFX.
• Improve the provisioning process for Automic and SFX project environment.
• Automate the migration process from QA to PROD for file routing rules.

Job Requirements:

• Bachelor’s degree in Electrical/ Electronics/ Mechanical Engineering/Computer Science or a relevant discipline.
• At least 3+ years of Experience with Automic AWA for batch workflows and IBM Sterling for file transfers.
• Ability to resolve batch and file transfer issues and support BAU change requests.
• Knowledge of security requirements for batch workflows and file transfers.
• Experience supporting audit requirements and providing detailed RFIs.
• Ability to manage interface connectivity with internal systems and external partners (e.g., Collection Agencies).
• Experience in SPS MSSL market trial onboarding for Market Retailers.
• Support for Automic upgrades and SIT/UAT testing.
• Knowledge of file transfer event setup and batch job design in SFXand Automic.
• Experience automating trading partner onboarding/offboarding in SFX.
• Experience in automating migration of file routing rules from QA to PROD.

We’re searching for a Network Engineer to be part of our diverse team of talent here at NCS!

If you believe in going above and beyond, want to exemplify the best, and wish to bring people and technology together like never before, then we would love to have a conversation with you!

What will you do?

· Responsible for the infrastructure network design, implementation, testing, security, managing and maintenance of proposed system

· Work closely with Team Leader to meet system delivery milestones

· Provide technical documentation support to Project & Solutions Teams, as well as hand over as-built system documentation to Maintenance support team

· Engage with back-line support and/or with vendor’s support to diagnose and rectify technical problems.

· Assist in day-to-day operation of the System Delivery team

· Carry out other technical related duties that may be required.

The ideal candidate should possess:

• Good understanding of network system, network architecture, routing, switching, firewall and security
• Good interpersonal and communication skills to interact effectively at all levels
• Proficient in performing network analysis and troubleshooting using network and protocol analyzers
• Bachelor’s degree or higher in Computer Science/Information Technology/Engineering or relevant field with network certification in CCNA/CCNP/CCIE
• Minimum 3-5 years of experience in configuring and administering routers and switches (e.g. Cisco routers and switches, etc), firewall products (e.g. CheckPoint, Forcepoint, etc.), F5 Load Balancers, AAA, NTP, IPS

What you might also need to have:

• 24 x 7 standby support and/or Shift work schedule