Job Description & Requirements

.Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Co-ordinate on quality matters with project team, conduct regular inspection to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA's good industry practice.

Ensure that all project quality records and quality audit plans are maintained, assist in yearly ISO audit.

Prepare Quality Control Plan, procedures and QA/QC reports.

Inspect the final output, comparing it to the requirements and approving or rejecting the final products.

Knowledge of welding inspection and ISO standards, familiar with CONQUAS, Green Mark and other essential BCA requirements.

In-depth knowledge of quality control procedures and legal standards.

Good verbal and written communication skills.

Willing to travel to various sites.

Prepare Inspection Test Plan (ITP).

Prepare document submission for client's approval.

Compile and receive relevant material certificates and test report from suppliers.

Co-ordinate with relevant testing laboratories for material testing and witnessing.

Assist the project team on QA/QC matters.

Good understanding of construction industry practices and standards in particular metal works and facade works.

Degree / Diploma in Civil Structural Engineering or equivalent.

Minimum 2 years relevant experience in metal work and facade industry.

Co-ordinate on quality matters with project team, conduct regular inspection to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA's good industry practice.

Ensure that all project quality records and quality audit plans are maintained, assist in yearly ISO audit.

Prepare Quality Control Plan, procedures and QA/QC reports.

Inspect the final output, comparing it to the requirements and approving or rejecting the final products.

Knowledge of welding inspection and ISO standards, familiar with CONQUAS, Green Mark and other essential BCA requirements.

In-depth knowledge of quality control procedures and legal standards.

Good verbal and written communication skills.

Willing to travel to various sites.

Prepare Inspection Test Plan (ITP).

Prepare document submission for client's approval.

Compile and receive relevant material certificates and test report from suppliers.

Co-ordinate with relevant testing laboratories for material testing and witnessing.

Assist the project team on QA/QC matters.

Good understanding of construction industry practices and standards in particular metal works and facade works.

Degree / Diploma or equivalent.

Minimum 2 years relevant experience in metal work and facade industry.

Job Description:

• Excellent written and oral communications skills and be comfortable coordinating tasks across multiple functions and global locations
• Able to quickly learn new concepts, processes and systems
• Proactive in sourcing for new supplies, select and negotiate for the best purchase package, in terms of quality, price, terms and, deliveries and services with suppliers for existing and new projects.
• Liaise with suppliers to address technical issues.
• Prepare purchase orders and monitor products delivery
• In charge of daily operational purchasing needs such as planning, issuing and follow up on PO, delivery and schedule
• Internal and external communication and coordination
• Maintain procurement records, including details on purchased items or services, costs, delivery timelines, product quality or performance, and inventory levels
• Analyze the requirements for supplies, raw materials, and equipment needed to support production and other internal departments
• Any other duties as assigned

Requirement:

• Minimum 2-3 years working experience in Semiconductor Industry or Precision Industry.
• Good negotiation, interpersonal, communications and coordination skills
• Diploma / Degree in Supply chain / purchasing/engineering or equivalents
• Detailed oriented, Positive attitude, self motivated, target drive
• Excellent analytical and problem solving skills
• Good understanding of procurement best practices & industry trends
• Processes the ability to read, write and communicate in Mandarin with Chinese-speaking vendors and internal Chinese-speaking stakeholders
• Self-starter with good initiative and a team player personality

THE ROLE

• Plan, host and facilitate events for Lockdown, The Escape Artist, V-Room and Lava Floor
• Handle day to day retail operations of Lockdown, The Escape Artist, V-Room and Lava Floor
• Design and prepare marketing materials
• Attend to customers and email enquiries about events.
• Willing to work as needed during weekends and public holidays

KNOWLEDGE AND SKILL REQUIREMENTS

• Able to prioritize work, multi-tasking and follow-up with an eye for detail
• Quick thinker and problem solver
• Confident in speaking to a group of people
• Willing to work on public holidays and weekends when needed
• Good oral, written and interpersonal skills
• Photoshop/Design skills will be advantageous
• Candidate must possess at least a Diploma

BENEFITS

• Opportunities for rotations of roles and exposure to different events
• Roster shift averaging 5 day work week (one workday consists of the full operation hours from 12noon to 9pm)
• Company performance benefits
• Up to 25 days leave and PH offs annually
• Medical subsidies
• Casual and fun working environment

Interested candidates, please email us at [email protected] with your resume and include the following details – name, date of birth, gender, contact, recent photograph and expected salary.

• Responsible for General Ledger (GL), Fixed Asset and Inventory functions
• Prepare and post journal entries during month end financial close
• Perform variance and trend analysis at entity level
• Responsible for month end closing, yearly financial closing and quarterly reporting
• Correspond and resolve operational issues with various other departments
• Prepare balance sheet schedules
• Prepare quarterly GST submission and attend external bodies enquiries
• Assist in the annual budgeting exercise
• Handle audit and tax matters for the entity
• Any other tasks/projects assigned by GL accountant

Requirements

• Diploma/Degree in Finance / Accounting
• At least 1-3 years of experience in a similar capacity with knowledge of full set accounts
• Proficient in MS Applications i.e. Word, Excel Pivot Table, Vlookup, Powerpoint
• Analytical thinking, detail oriented with good organisational and time management skills
• Effective communication skills for presenting financial data
• Bilingual in English and Mandarin to liaise with Mandarin speaking stakeholders
• Willing to work in Tuas (nearest MRT Tuas Crescent, company transport provide

• Salary details: up to $3,200 (depending experience and qualifications)
• Working Days and Hours: Mondays to Fridays: 9am to 6pm ; Saturdays 9am – 1pm (WFH)
• Location of work: Macpherson (nearest MRT: Mattar)
• Key Company Benefits:

- Medical Reimbursement up to $180/year.
- Dental Reimbursement: $100/year.
- Provided with work mobile phone OR entitled to $20 monthly phone allowance.
- Staff meals (lunch) will be provided for days in office.
- Work from home

Job Responsibilities:

• Build and maintain partnerships with stakeholders, volunteers, donors, and supporters to secure resources for service continuity.
• Expand volunteer and donor base by sourcing and engaging new prospects.
• Manage volunteer and donor database, respond to inquiries, and maintain communication.
• Oversee donations and ensure donor support and appreciation.
• Develop and implement short- and mid-term fundraising strategies, action plans, and targets.
• Establish fundraising policies and execute events with stakeholder involvement.
• Track donations to meet targets and prepare post-event reports.
• Oversee volunteer deployment, satisfaction, training, and role matching.
• Promote the company’s mission and brand through various media and community engagement.
• Manage publications, media releases, and brand materials.

Requirements

• Diploma or Degree with a passionate to work in a non profile organization.
• Able to commit to work on a weekends when there are events/roadshows.
• Proficient in any design software.
• Singaporean Only.
  

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Choo Tchi Seng

Registration Number: R1544906

EA Licence No: 06C2859 (MCI Career Services Pte Ltd)

Job Description:

• Set up cutlery, crockery and glassware on table and replace soiled tableware and service items to prepare the table for the next customers
• Serve food and beverages to ensure all dishes match the order ticket to the corresponding tables
• Operate Point of Sales (POS) Systems when managing beverage order
• Provide go-the-extra-mile service to create a positive customer experience
• Maintain hygiene, safety, and standards, follow the organization’s personal, food and beverage hygiene standards
• Assist in opening, operating, and closing of shifts and execute daily operational tasks according to staff roster
• Suggest areas and execute continuous improvement activities within work area

Requirements:

• Capable to liaise with Mandarin speaking associates will be advantage
• With or without relevant experience are welcome (training will be provided)
• Willing to work 5.5days per week
• Willing to work on Public Holiday and weekends

Responsibilities

• Handle all data entry using ERP system and excel.
• Generate quotations, delivery orders and invoices.
• Issuance of work orders to production.
• Handle emails and phone calls.
• Manage and purchase office stationery and inventory.
• Ensure proper filing of all documents.
• Fulfill any ad-hoc tasks assigned.

Requirements

• 2 years experience in administrative roles, preferably with engineering firms.
• Proficient in ERP system,MS Excel and Word.
• Able to write proper emails in English.
• Bilingual in English and Mandarin to handle customers.
• Ability to plan and prioritize workload and handle multiple tasks.
• Have good team-work spirit, willing to help out in other departments.
• Possess the flexibility and willingness to learn new things to gain skills, especially interpreting simple sheet metal drawings, needed for promotion opportunities.

JOB RESPONSIBILITIES:

• Develop and implement business strategies for the kitchen that align with the company's overall mission, values and strategies.
• Ensure the safety and hygiene standards in the kitchen are established, implemented and maintained.
• Review and control food costing.
• Check and ensure a consistency in the freshness and quality of food.
• Consistently improve and maintain a high quality food preparation and food presentation.
• Supervise associates to keep the kitchen areas organized and tidy on a daily basis especially the refrigerators and storerooms.
• Check and ensure storage of food items complies fully with provincial regulations.
• Purchase food and culinary equipment and supplies for the kitchen. Manage and maintain an acceptable inventory level for operational need.
• Control costs through minimizing wastages by ordering required stock quantities.
• Create new menus for special events/festivities on an annual basis. Work closely with other departments such as Sales, to design special menus for events.
• Ensure staff are well trained by Chefs in food knowledge and preparation.
• Ensure staff grooming, quality of food prepared, staff food handling skills and hygiene standards are observed and complies with regulations and expected standards.
• Conduct monthly meeting with the team to discuss operations issues and brainstorm ideas to improve the standard and presentation of food.
• Conduct performance appraisals for associates and manage their performance through coaching and training in accordance with established Resort standards.
• Submit reports as and when required by Management.
• Perform any other duties as assigned by Management.

JOB REQUIREMENTS :

• Support and uphold the company mission, vision and values.
• Demonstrate and be perceived as a role model.
• Good communications and leadership skills.
• Maintain highest standards of professionalism, ethics, grooming and attitude towards associates and guests.

• 5 days, Jurong, Transport provided (to & fro)
• $3800 - $4000 basic, fixed allowance
• Able to start within short notice
• 1yr contract (with completion bonus)

Responsibilities:

• Administer employee benefits program including insurance plan/welfare program and company events
• Administer manage specific modules for SAP-SF HRIS (leave)
• Assist with business traveling arrangement and coordination while adhering to business travel policy.
• Coordinate Executive events and functions.
• General administration duties and ad hoc duties as required.

Requirements:

• Possess higher Nitec/Diploma in HR, Business or Office skills
• Minimum 1 to 2 years of relevant experience
• Must have experience in arranging overseas business trips
• Good communication and interpersonal skills, planning and organising
• Ability to work independently and as part of a team.
• Meticulous and conscientious.
• Proactive individual with good planning & organizational skills
• Proficient in MS Office Suite

Interested applicants, please send your resume to [email protected]

Benefits:

• Basic Salary up to $6,000 with yearly increment based on performance.
• 5 Days Work Week (Mon to Fri, 8.30am-5.30pm)
• $800 flexi dollars provided
• Career Advancement Opportunities

Job Description and Qualification:

This is a full time role for a Business Development Executive located in Benoi Road. Our client leads in leasing and distribution of commercial and industrial vehicles. This position will drive company growth by collaborating with Sales and Marketing to generate and qualify new leads. Key responsibilities include identifying and qualifying sales opportunities, running customer calls to assess needs, setting meetings for the Sales team, and partnering with Sales to strategically engage key accounts. The role involves nurturing early-stage opportunities, maintaining effective lead management, and exceeding monthly targets. The BDE will also develop a deep understanding of our product and customers, acting as the first point of contact for prospective clients and honing customer-centric sales skills to deliver an excellent experience.

Qualifications:

• At least a Diploma or Degree in relevant Business Management discipline
• At least 3 to 5 years relevant work experience, preferably in the tech sector
• Prior experience in pipeline building and lead qualification (Ability to drive revenue and expand client relationships in areas such as automation, robotics, and software solutions for industrial applications)
• Self-starter, goal-oriented, passionate about technology, and capable of quickly learning new IT solutions

• 5 days, Jurong, Transport provided (to & fro)
• $3800 - $4000 basic, fixed allowance
• Able to start within short notice
• 1yr contract (with completion bonus)

Responsibilities:

• Administer employee benefits program including insurance plan/welfare program and company events
• Administer manage specific modules for SAP-SF HRIS (leave)
• Assist with business traveling arrangement and coordination while adhering to business travel policy.
• Coordinate Executive events and functions.
• General administration duties and ad hoc duties as required.

Requirements:

• Possess higher Nitec/Diploma in HR, Business or Office skills
• Minimum 1 to 2 years of relevant experience
• Must have experience in arranging overseas business trips
• Good communication and interpersonal skills, planning and organising
• Ability to work independently and as part of a team.
• Meticulous and conscientious.
• Proactive individual with good planning & organizational skills
• Proficient in MS Office Suite

Interested applicants, please send your resume to [email protected]

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Requirement:

• Minimum 2 years of experience in a marketing or administrative role
• Strong written and verbal communication skills in English
• Proficiency in using Microsoft Office suite and various marketing tools
• Excellent organizational and multitasking abilities
• Proactive and detail-oriented approach to work
• Ability to work well in a team and adapt to a dynamic work environment

Job Description:

• Assisting in the development and implementation of new system
• Analysis booking and sales trend
• Set up and maintain pricing structure
• Handling administrative tasks such as managing schedules, preparing reports, and maintaining records
• Providing customer service support and responding to inquiries
• Collaborating with cross-functional teams to ensure efficient operations

We are a distinguished luxury car rental company catering primarily to high-flyers and senior executives. Our clientele demands excellence, and we are dedicated to providing unparalleled service and an exceptional driving experience.

Job Description

• Attend to customers' requests for servicing requests, breakdowns, and accidents through various channels, in a timely manner.
• Communicate with customers to establish the service or repair needs for their vehicles.
• Follow-up with the workshop on pending jobs to ensure adherence to completion timelines, and keep customers updated on the status of their vehicles.
• Provide accurate and valid information with appropriate solutions and alternatives to handle customers' requirements and complaints.
• Collection/returning vehicle to the customer after servicing/repair.
• Upkeeping of company's fleet of vehicles.
• Assist with Ad-Hoc jobs as assigned by management.

Job Requirements

• Valid Class 3 license and 2 years of driving experience.
• Good communication skills.
• Basic automotive knowledge preferred.
• Positive attitude and problem-solving skills.
• Singaporean Only.

This role handles day-to-day operations and steps in as a driver when needed. If you have a Class 3 license, good communication skills, and a positive attitude, apply now for this dynamic role!

Job Highlights:

• Hybrid Work Arrangements (up to 2 days wfh/week)
• Company transport at multiple MRT stations
• Fresh Graduates with Bachelor's degree in Business, Supply Chain, Logistics or related field are welcome to apply!

Job summary:

Manage monthly inventory planning, purchase order approvals, reporting and reviews to ensure stockholding, ageing stocks and damaged stocks level are kept within target set. Supply planners are welcome to apply.

General responsibilities:

• Work out monthly and ad-hoc purchase plans to ensure stocks are kept at optimal level
• Monitor and track stock movements into and between the warehouses to maintain optimal stockholding
• Supervise the inventory system updates to ensure the accuracy of inventory records between material requirements planning (MRP) and actual levels
• Create purchase order and ensure timely submission of purchase order to client
• Track PO fulfilment, highlight major supply issues
• Review inventory holding with Client Management team. Follow through on clearance of excess inventory, obsolete, damaged & aged stocks
• Actively suggest potential ways to avoid or minimize excess inventory holding
• Prepare timely and accurate inventory reports and KPIs
• Compliance to SOP & company policies
• Housekeeping of Open PO
• Execute annual SKU Profiling & Rationalization exercise
• Collaborate with internal & external stakeholders to resolve inventory related matters

Leadership responsibilities:

• For senior executive position, he/she would have the opportunity to lead junior staff

Functional skills and knowledge:

• Demonstrate understanding of inventory planning methodologies and systems
• Demonstrate basic understanding of distribution centers, distribution and transport
• Experience in inventory management, procurement systems and logistics operations
• Demonstrate working knowledge of SAP - material requirements planning (MRP) system
• Demonstrate good analytical and quantitative skills
• Demonstrate appreciation and respect for cultural sensitivities especially in international/cross-cultural interactions
• Demonstrate proficiencies in office productivity tools (e.g. Excel, Word and PowerPoint)
• Demonstrate fluency in English (both written and spoken) and another language

Education:

• Diploma/Bachelor's degree in Business, Supply Chain, Logistics or related field

Work experience:

• Up to 1 year's experience in Inventory Management / Demand & Supply planning

Job Details:

• Actively seek out and engage with corporate clients to drive B2B sales.
• Develop and maintain strong relationships with customers in the car trade industry.
• Identify and pursue new business opportunities to meet and exceed sales targets.

Requirements:

• Proven experience in sales, preferably within the automotive industry.
• Strong negotiation and communication skills.
• Self-driven, with a hunter mentality to seek out new business opportunities.
• Preferably own a car.

What We Offer:

• Competitive basic salary with an attractive sales commission structure.
• Petrol/Transport reimbursement.
• Work location: West Coast

**With high commissions