Job Description..

• Ensure all packing workers are performed their jobs according to the written work instructions.
• To place packaging materials from the store by based on the packing plan.
• Verify and monitor the work done by Group Leaders and Inspectors.
• To handle and follow up on the problems forwarded by Group Leaders.
• Checked and reviewed all checklist and reports by Group Leader and below by timely basis.
• Assist final packing area.
• To provide on the job training to the Packers, Inspectors, Group Leaders other support operators.
• To ensure packing procedure and packing method are implemented and practiced.
• Ensure storage, packaging, online and final packing area are clean and tidy at all times.
• Ensure the product is stored, labeled and segregated at designated area.
• Ensure worker is handle products in correct manner and not causing any damage or contamination onto the products.
• Inform to Executive/Engineer or Manager for any equipment need to be repair, service or calibrate.
• To conduct appraisal for the worker during probationer period.
• Any other task that may be assigned.
• Help packing at warehouse.
• Performance the QAQC task in the warehouse.
• Paying attention to detail, especially when it come to quality control.

Duties and Responsibilities:

a) Monitor compliance to airworthiness regulatory requirements and quality standards

b) Conduct of internal quality audits and vendor audits

c) Facilitate training on regulations and quality related subjects

d) Support Safety Management System program

e) Perform capability evaluation reviews

f) Administrate personnel authorisation approval

g) Conduct quality investigation, analysis and drive corrective actions

h) Maintain Quality related KPIs

i) Comply with Health, Safety and Environment (HSE) regulations as prescribed by local law and company’s policies.

j) Participate and contribute to HSE initiatives & Corporate HSE programs and in HSE risk communications & mitigations.

k) Support to in Continuous Improvement Program

l) Any other duties as assigned

Experience and Qualifications:

a) Diploma / Degree holder in mechanical / electrical / electronic engineering or equivalent

b) Relevant CAAS papers qualification or equivalent will be advantageous

c) Minimum 2 years relevant working experience in aviation field is preferred

d) Knowledge on airworthiness regulatory requirements and AS9110 Standards

e) Trained Internal Quality Auditor / Lead Auditor is preferred

f) Safety Management System trained will be an added advantage

g) Good communication and writing skills

h) Knowledge in MS Office (Excel, Word, Powerpoint, Power BI), SAP, etc

i) Willing to work excess hours when required

j) Able to do business travel in short notice

k) Possess knowledge of statistical tools and methodology

l) Good team player and ability to handle tight datelines

Purpose: The role is responsible for handling customer quality issues and continuous improvement activities of the Company products and processes. You are required to drive internal departments on quality-related issues to follow up on effective corrective/preventive actions. You will be liaising with the internal team to support QBR, RMA, IFR, MRB, FAI Review and approval with Supplier and customer, In-Process Audit, FA Launch, 8D, SDR, FPY, tracker processes, and communicate between customer and internal team on Quality related matters.

Key areas of responsibilities:

• Lead and drive customer quality CAB meetings to derive root causes and corrective and preventive actions based on 8D methodology
• Perform ad-hoc visits to customer sites to facilitate investigation and improvement proposal
• Develop, drive, and lead the improvement of manufacturing systems and processes to meet and exceed customer expectations
• Lead and drive company-wide continuous improvement projects with relevant Organizations
• Build and drive customer relationships to improve customer satisfaction
• Perform customer quality performance monitoring and reporting to internal management and customer
• Manage the first article process and submit the report to the customer for approval
• Lead cross-functional team to establish the outgoing inspection checklist for NPI to ensure that the product meets customer requirement
• Analyze customer quality performance to identify trends and improvement opportunities
• Perform manufacturing audit

Qualification & Experiences:

• Degree in Mechanical/Mechatronics/Electrical/Manufacturing Engineering discipline
• At least 5 years of working experience, 3 years in dealing with customer quality managers or direct customer facing, related to the manufacturing environment, preferably from the semiconductor, semiconductor equipment industry, electronics, or high-tech instrument industry
• Strong knowledge and practices in 8D, SPC, FMEA, 6-sigma methodology (Certified Black/Green Belt), and change management
• Good understanding of first-article inspection requirements and expectations
• Excellent leadership and effective communicator with all levels of associates and management
• Experienced in Minitab is an advantage
• Experienced QMS auditor

• Facilitates planning and development ofquality control systems for specifiedproducts or processes.
• Collaborates with teams of engineers andproduct specialists to ensure customer anddivision quality requirements are met.
• Identifies the root cause of qualityproblems, and coordinates modificationsor other corrective actions.
• Liaising of Calibration Program.
• Periodically inspect instrument accordingto the specified schedule date
• Reviews design, manufacturing, and testingdocumentation.
• Update our Quality Management system(QMS) with incidents, fixes andimprovement.
• Offers technical guidance and support inresponse to quality testing and analysis.
• Ensures contract compliance by reviewingand approving quality requirements forsupplier purchase orders, manufacturing,and other related services.
• Performs other duties as assigned.

Key Responsibilities:

Research and Development (R&D):

Lead and oversee the company's R&D initiatives to develop innovative products and solutions.

Collaborate with cross-functional teams to ensure alignment of R&D goals with business objectives.

Monitor industry trends and technological advancements to maintain the company's competitive edge.

Prepare and manage budgets for R&D projects, ensuring optimal resource allocation.

Quality Management:

Develop, implement, and maintain the company’s quality management system (QMS) in compliance with international standards such as ISO 9001 or ISO 13485.

Conduct regular quality audits and inspections to ensure adherence to established procedures and standards.

Manage and resolve product quality issues, ensuring prompt corrective and preventive actions (CAPA).

Train employees on quality protocols and best practices to foster a culture of continuous improvement.

Regulatory Affairs:

Ensure the company’s products comply with all relevant local, regional, and international regulatory requirements.

Prepare and submit regulatory filings, including product registration, certifications, and renewals.

Act as the primary liaison with regulatory agencies and authorities, addressing inquiries and ensuring timely approvals.

Keep the organization updated on changes in regulatory policies and standards, adapting company processes as needed.

Documentation and Reporting:

Maintain comprehensive records of quality and regulatory processes, audits, and certifications.

Generate detailed reports and presentations for internal and external stakeholders on quality and regulatory performance.

Develop and update standard operating procedures (SOPs) to reflect regulatory requirements and quality standards.

Team Collaboration:

Work closely with the operations, manufacturing, and sales teams to ensure product quality and compliance throughout the lifecycle.

Support cross-departmental training on regulatory and quality matters.

Qualifications:

• Bachelor’s degree in Chemistry, Life Sciences, Engineering, or a related field (Master’s preferred).
• Strong knowledge of regulatory frameworks such as FDA, CE, or CFDA, and quality standards like ISO 9001 or ISO 13485.
• Excellent organizational and communication skills, with the ability to manage multiple tasks and meet deadlines.
• Proficiency in regulatory documentation and quality management software is a plus.
• This expanded job description ensures clarity in the role’s expectations and responsibilities while providing a comprehensive overview for potential candidates.

Quality Controller (QC) contributes to the production operations by executing general manufacturing and packaging tasks to ensure that manufactured and quality checked products are packed and ready for delivery.

Job Description

• Ensure that the quality of all finished products are in alignment with the management’s / ISO standards as well as the QC checklist
• Maintain integrity, accuracy and completeness of QC data and records.
• Ensure the Operations Officer receives all void products in a timely manner.
• Ensure that workstations are neat, clean, tidy and in accordance to packing SOPs.
• Ensure that products are prepared, cut and packed in accordance to company’s specifications and quality.
• Ensure that all residues are thoroughly removed from the products without damaging its condition & quality.
• Ensure that quality and quantity of the products are met at all times

Requirements

• Minimally GCE 'N' Levels
• 2 years of relevant experience in the manufacturing sector
• Comfortable with performing repetitive tasks

Quality Technician (Jurong Island)

Responsibilities

• Support production shift team with sample testing
• Cleaning and preparation of sampling apparatus, Ampule, gel bottles and other laboratory glassware.
• Prepare reagent and standard sample for analytical equipment.
• Report abnormalities and support troubleshooting of equipment.
• Review and revise for QC process flow, control plan and SOP of analytical such as non-prime product, process problems and complain.
• Investigate root cause and take corrective action plan.
• Planning for analytical process modification and analytical process change.

Requirements

• Min NITEC or Diploma in Chemical Engineering field or other relevant certificates
• Possess Analytical knowledge and Skills such as gas chromatography, gel permeation chromatography, Fourier infrared analysis, gel analysis, Karl Fischer’s method and titration method) are preferred
• Highly motivated, a team player, with the ability to multitask and project management skills
• Understand quality policy and basic rule.

Interested applicants please submit your resume to [email protected]

We love building HR software. And surely we can do better – with your help.

What We Value:

• You have initiative and are innovative
• You seek ownership in your work
• You have passion and ambition
• You love challenges and look for responsibilities
• You have a sense of humour (we love a good joke)
• You possess good English written and spoken communication skills

Responsibilities

• Create, maintain, and execute automated regression test suite for mobile and web applications
• Develop and maintain test plans, testing strategies, test cases, test data, matrices, and other QA related documentation
• Work with the Engineering Team to continuously improve test coverage to improve quality of released products
• Keep up to date on the latest tools, industry trends and technologies for software testing and put them to good use!

Requirements

• Degree/Diploma in Information Technology, Computer Engineering, Computer Science or related fields
• MUST HAVE:

1. At least one (1) year of experience in test automation experience
2. At least one (1) year of experience working in an agile environment.
3. Familiar with at least 1 test automation tool software (e.g. testsigma, selenium, Telerik, etc.)
4. Strong understanding of Software QA methodologies best practices to design, build and execute unit, functional and integration test cases
5. An independent, resourceful, result-oriented and analytical thinker.
6. Experience with Git and Jira
7. Strong oral and written English communication skills

We appreciate people who are constantly working towards improving themselves. If you ever find yourself facing an issue, as a team, we’ll find the solutions together.

When’s a better time to join HerdHR and shape the product of the future? We say NOW.

NOTICE

We regret to inform that only shortlisted candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read and agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Consequences of Not Providing Personal Data for Transaction/Service/Application

Please be noted that should you not consent and provide use with the relevant personal data to fulfil the “Purposes” of collection, use and disclosure of your personal data by HerdHR, it may hinder our ability to continue to interact with you. We may not be able to make a decision on your recruitment and employment or comply with the law and therefore, we may not be able to make an offer of employment

You may refer and access our website for more information.

Job Summary

We seek an experienced and motivated Software Quality Engineer to join our forward-thinking tech team. In this role, you'll ensure our platform is reliable and meets high-quality standards. This position allows you to work across teams, shaping and implementing advanced QA processes that support scalable, reliable, and innovative solutions

Responsibilities:

Test Strategy and Planning

- Define and lead comprehensive QA strategies, covering all phases of the software development lifecycle.

- Develop, manage, and execute manual and automated test plans, cases, and scripts to ensure thorough testing.

Automation and Tooling

- Lead the development of automated testing frameworks using Cypress, Playwright or any automation tool for end-to-end test coverage.

- Drive platform scalability by implementing performance and load tests using tools like Gatling, K6, or Jmeter.

Quality Assurance

- Perform contract testing to ensure smooth interaction between microservices.

- Lead regression testing efforts for bug fixes and new features to maintain overall quality.

- Oversee the end-to-end testing pipeline, resolving issues promptly to avoid any delays.

Cross-Functional Collaboration

- Work closely with product managers, developers, and DevOps engineers to meet project requirements and deliver high-quality software.

- Contribute to agile team processes, including sprint planning and other ceremonies, with valuable QA insights.

- Coordinate with QE teammates to prepare and lead weekly deployments, ensuring smooth execution.

Issue Resolution and Reporting

- Accurately document, track, and report software defects, conducting root cause analysis as needed.

- Provide timely and detailed reports on QA activities, testing outcomes, and relevant quality metrics.

Requirements:

- Expertise in software quality assurance, with a strong focus on automation testing (e.g., Cypress, Playwright).

- Demonstrated experience with performance testing tools such as Gatling and Autocannon.

- Proficient in JavaScript (TypeScript) or Java

- Familiar with frontend and backend technologies (e.g., ReactJS, ExpressJS, Gin-gonic), as well as cloud platforms (AWS, Docker, Kubernetes).

- Knowledgeable in CI/CD tools (e.g., GitLab, ArgoCD) and relational databases (MySQL, PostgreSQL).

- Solid understanding of REST and GraphQL APIs, JWT for authentication, and search technologies like Elasticsearch.

- Exposure to additional testing tools and caching systems like Redis.

- Experience with logging and monitoring platforms such as Splunk or OpenSearch.

Qualifications

- Bachelor’s degree

- Strong problem-solving, analytical, and communication skills.

Our client is a private hospital and we are looking to expand our team!

• To collaborate with Education and Training Department, department’s Nurse Managers/Clinician and other healthcare professionals in the development of on-the- job training and nursing-related clinical competencies, Standard Operating Procedures (SOPs) and Work Instructions
• Assist in providing initial and ongoing on-the-job training for nurses in the respective department.
• To perform clinical supervision and support newly employed nurses in the respective department.
• Act as a resource person to nurses on clinical and nursing quality-related matters.
• Enhance professional nursing development in respective department through continuous mentoring, coaching and role modeling.
• To assist Nursing Quality in the management of Nursing Quality issues as to ensure high standards of nursing practice at the respective department.
• To promote a culture of safety, quality and service excellence by constant monitoring of compliances.
• To participate in nursing quality improvement-related projects.
• To participate in physician rounds and collaborate with physicians and other allie healthcare professionals so as to ensure continuity of patient care.
• To ensure correct billing of consumables used for patients.
• To perform other assignments as and when required by the Nurse Manager/Clinician.

Requirements:

• Possess a valid SNB Registered Nurse Practising Certificate.
• Diploma/Degree in Nursing with a strong clinical nursing background.
• Advanced Diploma in Nursing (Orthopedic, Oncology, Med-surg)
• Clinical Instructor certificate is preferred.
• Possess a valid BCLS and AED certificate.
• Minimum 5 years of Clinical experience
• Able to commit to morning and afternoon shifts

About Innowave Tech

Innowave Tech is a leading AI solution provider in the semiconductor industry, specializing in developing cutting-edge technologies for innovation and efficiency. Our focus is on leveraging computer vision and large-scale data analytics to meet the complex needs of our clients.

Position Overview:

As a Quality Management Intern, you will assist our Quality Assurance team in establishing and maintaining the ISO 9001 QMS. You will gain hands-on experience in quality management principles, documentation practices, and continuous improvement processes. This internship offers a unique opportunity to learn about ISO standards and contribute to the development of our quality management framework.

Responsibilities:

• Support QM Documentation: Assist in the creation, revision, and maintenance of QM documentation, including policies, procedures, work instructions, and forms.

• Data Analysis: Help analyze quality data and metrics, generate reports, and identify trends or areas for improvement.

• Process Improvement: Contribute to process improvement initiatives by participating in root cause analysis, corrective action planning, and effectiveness reviews.

• Audit Assistance: Support internal and external audits by preparing necessary documentation and coordinating audit logistics.

• Training Support: Aid in the development and delivery of QM training materials and sessions for employees.

• Compliance Monitoring: Assist in monitoring compliance with quality standards, regulatory requirements, and internal policies.

• Project Assistance: Work on special projects related to quality management and process optimization as assigned

Requirement:

• Currently pursuing a diploma or degree in Business Process and Systems Engineering, Quality Management, Industrial Engineering, or a related field. Recent graduates may also be considered.

• Strong analytical skills, attention to detail, and proficiency in Microsoft Office Suite (Word, Excel, PowerPoint).

• Basic understanding of quality management principles, ISO standards (e.g., ISO 9001), and quality tools (e.g., root cause analysis, statistical analysis) is preferred.

• Excellent written and verbal communication skills.

• Ability to work effectively in a team environment and collaborate with cross-functional teams.

• Enthusiasm for learning and a proactive attitude towards taking on new challenges.

• Resume stating nationality and school name due to MoM requirement, Singaporeans/PR preferred.

Screening Questions

1) Do you have basic understanding of quality management principles, ISO standards (e.g., ISO 9001), and quality tools?

2) Are you currently pursuing a degree in Engineering, Quality Management, Industrial Engineering, or a related field?

3) Do you have excellent written and verbal communication skills.

In this role, you will:

• Job shadow / On-job training with the team to understand cable manufacturing and testing process
• Be involved in QC tests (Incoming Quality Control, In-Process Quality Control, Final Quality Control/Out-going Quality Control)
• Prepare technical reports based on customer’s required specification
• Develop and implement performance improvement and quality assurance programs
• Be closely involved in one or two projects relating to QC team’s productivity or digitalization efforts

Job requirements:

• Strong attentiveness to details as QC data requires accuracy
• Takes initiative in leading a task and will proactively check in when in doubt
• Basic knowledge in quality assurance or systems and/ or process optimization is a plus
• Proficient in MS Office (Excel, Powerpoint)
• Comfortable in working with data

*Kindly indicate the period you are able to commit to the internship in resume

*Only available for internship period beyond August

• 1 year renewable
• Central area - Clarke Quay
• Monday - Friday, office hours
• Handle mailbox survey submissions, feedback, and requests from survey respondents within stipulated turnaround time.
• Ensure consistent and detail cases notes updated in system after each liaison with respondents.
• Responsible for inter-department liaison for correct assignment of respondents to the parties responsible.
• Ensure prompt follow-up for survey cases under pending status.
• Provides accurate daily report on mailboxes activities for the day to relevant stakeholders.
• Ensuring all potential/actual complains are acted upon within stipulate timeline.

Interested candidates, please click on the following link to begin your job search journey and submit your curriculum vitae (CV) directly through the official PERSOLKELLY job application platform - GO. https://go.persolkelly.com/job/apply/5789

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tacand the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries. Suzana Binte Slemat (EAP No. R1989461) EA Licence No. 01C4394

Responsibilities:

• Same as Associate Consultant but with an increased level of responsibility, including leading the test strategy development and mentoring junior testers.
• Take on more complex test automation projects and drive improvements in test processes.
• Manage cross-functional teams to ensure quality standards are met throughout the development cycle.
• Provide technical leadership for test automation and work closely with Product Owners and developers to ensure optimal test coverage.

Experience and Skills Needed:

• More than 4 years of experience in exploratory testing and automation.
• Proven experience in leading test automation initiatives and mentoring junior team members.
• Strong understanding of Agile testing practices and tools.
• Excellent communication and leadership skills.

Job Description

1. Supervise a team of QC Officers in all factories.
2. Guide and troubleshoot for any equipment issues, co-ordinate with external service providers Ensure laboratory equipment is calibrated in a timely manner and update calibration records. Assist to keep, control, and confirm formulation and blending procedures.
3. Respond to new and existing customers for inquiries related to quality control Conduct quality testing and communicate product specification issues. Conduct nonconforming material or nonconforming product analysis.
4. Participate in the root cause analysis of nonconforming goods.
5. Follow the instructed corrective actions and preventive actions by superiors. Establish formulation and blending procedures as needed.
6. Keep and monitor retain samples of products
7. Validate COA of raw materials received and communicate any issues to the procurement and Plant Manager Establish, update and issue GHS SDS.
8. Create certificate of analysis (COA) of products.
9. Confirm and provide resources for the laboratory and other QCR needs.
10. Coordinate sample delivery as required by the customer.

Job Requirements

• Min. Degree in Chemistry related field or
• Diploma in Chemistry with minimm 5 years of relevant experience
• Technical Knowledge : Microsoft Officer (Basic) / Good knowledge & skills on QC testing
• Ability to coach and mentor the team

• Ensure all quality control documentation is compiled and completed for as-built handover through the QC turnover engineer
• Review and prepare reports on Authority inspections (RI inspection, BCA TOP inspection, etc)
• Establish Project Quality System, implement and maintain in accordance with Singapore standards application to BCA for CONQUAS Assessment and provide a framework to achieve the score
• Assess the implementation of the Quality Plan and Quality Control Plans on site
• Ensure the project QA/QC plan follows specifications and contract requirements
• Compete for site quality control instructions and action remedial responses
• Coordinate quality inspections with all the site subcontractors and vendors and coordinate all non-destructive testing on site
• Distribute relevant QA/QC documentation to site subcontractors
• Verify the quality-related site activities are in accordance with the applicable codes and standards
• Participate in the site's internal and external site audits
• Coordinate all the quality site inspections through the site QC inspectors
• Control all nonconformance reports and undertake remedial action
• Must have fluent English communication skills to liaise with the Client’s staff
• Have Main Contractor Experience

Our Client is in the Aviation Industry. Due to their current expansion plan, they are looking for an Quality Engineer to join their team, in hopes of developing the current high performing team. They are located in the East.

Responsibilities;

• Ensure product and process quality by managing the Quality Management System (QMS) in compliance with government regulations, aviation authority standards, and customer requirements.
• Update and refine quality procedures and control instructions to align with operational and regulatory standards.
• Collaborate with customers, vendors, and suppliers to address non-conformance issues.
• Perform root cause analysis and implement corrective actions to reduce poor quality costs.
• Conduct internal audits to evaluate compliance with ISO 9001, AS9100, and NADCAP standards.
• Carry out vendor and on-site audits as required to ensure quality performance.
• Ensure strict adherence to customer and regulatory authority standards and specifications.
• Lead efforts to minimize the cost of poor quality and reduce scrap through effective quality management practices.
• Any ad-hoc duty as assigned

Requirement

• Min Degree in Mechanical or Aeronautical Engineering
• Min 2 years experience in ISO9001 / AS9100 Quality Management System and NADCAP process
• Experience and knowledge in fishbone diagrams, FMEA and 5-whys methodology
• Able to read and interpret technical and blue print drawings

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Position Summary

This position is involved in Supplier Quality activities that improve, monitor and measure Illumina’s compliance with the Quality System Regulations, Illumina Quality policies, FDA regulations and ISO standards as well as Illumina product quality for current operation and compliance objectives.

Responsibilities:

• Support qualification of new Suppliers and Partners for materials and services including risk assessments, audits and other supplier on-boarding activities
• Provide support to investigation teams in determining root causes on material quality issues and initiate/ensure corrective and preventive action plans are developed and executed
• Interface with Suppliers/CM (Contract Manufacturer), Engineering / Manufacturing / Quality Assurance / Procurement departments to drive for quality improvements, specifically on incoming rejects, workmanship defects and primitive failures
• Participate in Quality review activities with supplier/CM to identify improvement opportunities to meet quality expectation
• Compile, evaluate and report on supplier/CM quality performance metrics for scorecard and monitoring
• Monitor to ensure supplier’s preventive and corrective actions are implemented and effective
• Participate with NPI team in selection of new suppliers

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Position Requirements:

• Bachelor’s Degree in Engineering, Life Sciences, or related field with 1-3 years of relevant experience
• Experience in driving suppliers to improve quality performance
• Experience in conducting supplier audits
• Good understanding of FDA regulatory environment (CFR 820), 501k and ISO 13485 strongly preferred.
• Experience in medical device / pharmaceutical / IVD is preferred
• Developing basic knowledge of quality tools
• Beginner to intermediate experience with Microsoft tools and spreadsheets, charting, graphing tools and presentation tools.
• Experience with electronic production life (PLM), enterprise resource planning tools (SAP) and etc are preferred
• Experience with statistical analysis packages, eg, JMP, Minitab are preferred
• Detailed oriented, well organized and able to work independently and in teams.
• Good communication and collaboration skills
• Ability to travel as needed

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional task and responsibilities.

Job Description

To perform inspection by using CMM & other measuring equipments

To ensure parts are according to customer's requirements

Job Requirements

Higher NITEC level in technical engineering or GCE 'O' level

Minimum 1 year related working experiences

Able to operate CMM machine independently is an advantage

Able to commit overtime

Good team player

Independent

• Position: Quality Assurance QA/QC Engineer (MUST BE from Marine Engineering)
• Location: North Bridge Road (Walking distance from Fort Canning MRT Station)
• Working hours : 5 days / Monday - Friday - 9.30am -5.30pm
• Salary (Commensurate with experience): Basic up to $ 3700 + AWS + 14 days Annual Leave
• Duration : Permanent
• Industry : Global leader in Marine Lifting Equipment

Main Responsibilities:

• Perform inspection of incoming products, materials or customer items according to job project requirement
• Perform initial inspection and raise report
• Perform in-process inspection according to procedures and customer’s specifications. Raise report whenever necessary. Measure and record the dimension of components/parts using measuring instruments and analyse the findings for discrepancy
• Perform final inspection of items including dimensional and NDT to ensure that all quality requirements has been achieved. Analyse result and decide the acceptance level of the final product
• Prepare and conduct Project Specific Quality requirements training to production Supervisors and Sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Support QA/QC Manager for establishing WPS, PQR and WQT Qualifications.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of Inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.

Requirements:

• Degree in Engineering or Diploma in Mechanical/ Marine Engineering or equivalent
• Experience in handling project Audit and liaise with internal & external auditor
• Knowledge in structural fabrication, piping isometric drawing and materials
• Experience in piping line walk, reinstatement inspections by clear understanding of isometric drawings

Email to: [email protected] or call me at: 6398 5689 for more information.

Like us on Facebook or Instagram (For Career tips and Job vacancies): www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

Join us on Linkedin: www.linkedin.com/company/search-personnel-pte-ltd

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Job Scope

• Responsible to review and approve master batch records and subsequent batch records
• Review and approve cleaning records and procedures and ensure compliance with set
• Review and approve GMP documentation Ensure adherence to quality procedures, regulatory requirements and cGMPs.
• Review and approve deviations according to the site procedures
• Handle product complaints.
• Ensure complaints are investigated thoroughly with CAPAs effective to prevent recurrence.
• Coordinate with cross-functional team to prepare Annual Product Reviews, discuss trends and atypical observations and recommend improvement actions.
• Conduct internal and external audits
• Maintain inspection readiness and support inspections from regulatory agencies and customers.
• Actively participate in GMP walk downs to ensure site operation and facility maintained in inspection ready state.
• Support the maintenance of validated stated of GMP systems and processes.
• Facilitate and prepare regulatory submissions and attend to regulatory queries in a timely manner

Requirements

• A Bachelor Degree in Science / Chemical Engineering or equivalent with relevant pharmaceutical experience.
• Minimum 1-3 relevant years of experience in QA/QC and GMP Compliance
• Familiar with manufacturing operations applications; six sigma and lean principles and process improvement tools.
• Thorough knowledge of GMP compliance regulations, ICH Q7a Guidelines, Good Documentation Practices and other applicable regulations.
• Proven track record of continuous improvement in quality operations or manufacturing.

All qualified applicants, please send in your resume to:
[email protected]

Tricia Celestine Goh (R1981653)
Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Job Scope:

· Manage QC data of assigned projects, including performing QC checks/audits on interviewers via telephone validations, audio audits, onsite checks, and observations

· Supervise the Data and QC Team to ensure that work is done in accordance with project specifications.

· Review and rectify data discrepancies, and upkeep multiple datasets by compiling, cleaning, and sorting information according to established data fields to support overall data management.

· Script and conduct User Acceptance Testing (UAT) - checking, formatting, reviewing, and testing survey links for questionnaires.

· Ensure data consistency and accuracy across multiple variables and different datasets in accordance with project specifications and the conventions used within the dataset.

· Perform data coding, cleaning, and processing to ensure it is in accordance with industry standards of SSOC and SSIC or the related code frame provided.

· Manage longitudinal panel data, including merging and stacking panel data across different waves via syntax.

· Conduct operational data analysis and reporting: using SPSS/Excel to perform data validation and updates on key variables to identify issues related to data collection and quality, and to generate quality reports.

· Use SPSS to visualize relevant key variables using tables or other relevant visualization tools to identify possible issues and understand the breakdown of these key variables for decision-making.

· Train interviewers in accordance with project specifications to ensure that the quality of interviews is kept at high standards.

· Provide timely feedback to the Field team based on validation results to rectify any data discrepancies.

· Evaluate and generate reports on the quality of data collected by the interviewers

· Liaise with vendors on project-related logistic matters

· Liaise with clients to process data within their requirements

· Assist in vetting translations of survey questionnaires when required

Requirements:

· Bachelor’s degree with at least 1 year of experience working with data related to government-related research projects or the market research field

· Experience in coding SSOC and SSIC

· Prior experience in training new staff

· Keenly interested in data analysis

· Possess data management skills and computer knowledge, programming knowledge, and web development experience in SPSS, Python, R, and HTML.

· Know how to use and have experience using Case Management System, SPSS DimensionNet, and Qualtrics for data collection; solid knowledge of writing SPSS syntax for data logic checks and data processing

· Good interpersonal and communication skills

· Meticulous and detail-oriented

· Ability to prioritize workload, be resourceful in getting things done to meet deadlines, and cope well with stress

Additional Information:

· Contract duration: 12-month contract, renewable

· Working days and hours: Mon to Fri 9am to 6pm

· Location: Commonwealth, Evans Road

Responsibilities:

• Develop and manage patient safety incident frameworks, conduct investigations, and analyze incident data.
• Implement and coordinate patient safety programs, including safety reviews, committees, and campaigns.
• Identify safety risks, design preventive measures, and collaborate with clinical risk management for improvements.
• Provide training, create resources, and facilitate knowledge-sharing to enhance organizational capabilities.
• Offer administrative support to safety committees and collaborate with stakeholders for quality improvements.

Requirements:

• Minimum Degree in Nursing, Social Work, or Allied Health disciplines.
• 0–4 years of relevant healthcare experience, especially in patient safety or clinical quality improvement.
• Proficient in MS Office applications; knowledge of basic statistics is advantageous.
• Demonstrates strong organizational, analytical, and communication skills; meticulous and proactive.
• A good team player with the ability to work independently and engage effectively with stakeholders.

Interested candidates who wish to apply for the advertised position, please click on “Apply Now”. Alternatively, you may email us an updated copy of your resume (Attn: HUEY) for a confidential discussion.

Job Code: HUEY

EA Reg No: R24122358 (YEO HUEY CHEEN)

EA License: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

We regret that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at https://www.persolkelly.com.sg/policies. I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

Job Description:

• Attends customer’s complaints, enquires on quality related matters
• Investigate and analysis of customer complaints and follow-up with the relevant departments to ensure that they are addressed and closed in a timely manner
• Co-ordinate customer’s requests for products in mass production
• Attend quality reviews and presentations as and when required to by the customers
• Monitor and manager product quality performance and submit review report to Management periodically
• Study and improve production quality yield for each status of sample

Job Requirements:

• Candidate must possess at least Bachelor’s Degree in Engineering or equivalent
• Minimum 2 years of relevant working experience in similar role
• Self-motivated, innovative, dynamic and team player
• Excellent written and verbal communication skills
• Able to meet deadlines and willing to perform overtime
• Candidate with no working experience is also welcome to apply

Interested applicants, please send in your resume stating your date of availability, current and expected salary.

• Possess knowledge in GMP and halal certification processes
• Assist in GMP preparation for audit
• Assist QC manager in daily operations
• Testing of finished products against specifications and to notify for any out of specifications
• Maintenance of manufacturing facility as per GMP requirements
• Prepare products for testing from external laboratories
• Conduct instrument analysis and calibration of laboratory equipment and basic equipment maintenance
• Assist in generation of Certificate of Analysis
• Conduct incoming materials check

Requirements

• Minimum Diploma in Chemistry or relevant courses
• Minimum 2 years of experience
• Able to work independently with minimal supervision
• Able to write and communicate in English
• Knowledge in Excel and word
• Knowledge in SAP will be an added advantage