Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Co-ordinate on quality matters with project team, conduct regular inspection to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA's good industry practice.

Ensure that all project quality records and quality audit plans are maintained, assist in yearly ISO audit.

Prepare Quality Control Plan, procedures and QA/QC reports.

Inspect the final output, comparing it to the requirements and approving or rejecting the final products.

Knowledge of welding inspection and ISO standards, familiar with CONQUAS, Green Mark and other essential BCA requirements.

In-depth knowledge of quality control procedures and legal standards.

Good verbal and written communication skills.

Willing to travel to various sites.

Prepare Inspection Test Plan (ITP).

Prepare document submission for client's approval.

Compile and receive relevant material certificates and test report from suppliers.

Co-ordinate with relevant testing laboratories for material testing and witnessing.

Assist the project team on QA/QC matters.

Good understanding of construction industry practices and standards in particular metal works and facade works.

Degree / Diploma in Civil Structural Engineering or equivalent.

Minimum 2 years relevant experience in metal work and facade industry.

Co-ordinate on quality matters with project team, conduct regular inspection to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA's good industry practice.

Ensure that all project quality records and quality audit plans are maintained, assist in yearly ISO audit.

Prepare Quality Control Plan, procedures and QA/QC reports.

Inspect the final output, comparing it to the requirements and approving or rejecting the final products.

Knowledge of welding inspection and ISO standards, familiar with CONQUAS, Green Mark and other essential BCA requirements.

In-depth knowledge of quality control procedures and legal standards.

Good verbal and written communication skills.

Willing to travel to various sites.

Prepare Inspection Test Plan (ITP).

Prepare document submission for client's approval.

Compile and receive relevant material certificates and test report from suppliers.

Co-ordinate with relevant testing laboratories for material testing and witnessing.

Assist the project team on QA/QC matters.

Good understanding of construction industry practices and standards in particular metal works and facade works.

Degree / Diploma or equivalent.

Minimum 2 years relevant experience in metal work and facade industry.

Job Responsibilities:

· Prepare BIM e-submission to authorities

· Coordinate BIM drawings with Consultants and Contractors.

· Perform correct BIM modelling practices for documentation and authority submission

· Work with project architect on all matters pertaining to design, technical compliance and building code / regulations

Job Requirements:

· Minimum Diploma in Architecture or BCA Specialist Diploma in Building Information Modeling (BIM)

· Proficient in ArchiCAD

· Experience in BIM e-submission to authority

· Experience in preparing construction drawings

Job Description:

• Conduct assessments to identify and qualify vendors based on quality, cost, and reliability;
• Draft and distribute RFPs (Request for Proposal) to potential vendors, outlining the specifications and requirements for products or services needed;
• Perform detailed cost analyses to identify optimal procurement options aligned with budget constraints and quality standards;
• Lead negotiations with suppliers to secure advantageous contract terms and conditions;
• Keep procurement activities compliant with internal policies and external regulations;
• Collaborate with the quality control team to ensure the purchased materials meet all necessary quality metrics;
• Oversee the entire ordering process, from initial requisition to final delivery, ensuring timeliness and accuracy;
• Maintain and nurture relationships with suppliers for long-term partnership and potential cost savings;
• Serve as the point of contact between engineering departments and suppliers to clarify technical specifications or resolve issues.

Job Requirements:

• Bachelor's degree in Business Administration, Supply Chain Management, or a related field;
• Certification in procurement or supply chain management (e.g. CPSM, CSCP) is preferred;
• Minimum of 5 years of experience in procurement or purchasing;
• Ability to work independently and manage multiple projects simultaneously;
• Experience in vendor management and supplier relationship management;
• Strong analytical and problem-solving skills;
• Ability to work independently and manage multiple projects simultaneously;
• Negotiation Skills, Strategic Thinking, Communications Skills.

Anticimex is the modern pest control company. Through prevention, new technology and sustainable solutions, we meet the new demands for healthy environments, for both individuals and businesses.

Due to growth, we’re looking for experience Integrated Specialist to join our team. As part of your role, you will be responsible for the below duties:

-Assist in the execution of mergers/acquisitions transactions

-Exercising due diligence in facilitating the closing of a deal

-Pre-acquisition activities such as planning, searching and valuation

-Handle day-to-day transaction execution

-Perform and oversee financial analyses, including valuation

-Review transaction documents (including sale and purchase and shareholder agreements)

-Interact directly with clients and coordinate with other advisors (lawyers, co-advisors)

-Preparation and review of materials used for engaging stakeholders

What we’re looking for:

Integrated Specialist

-Degree in Accounting / Banking and Finance

-At least 5-7 years of relevant experience

-Knowledge in accounting and financial modelling / valuation

-Proficient in Microsoft Office

Benefits:

• Basic Salary $3,300 -$4,500 (OTE $39,600 - $54,000 P.A.)

• Company welfares & Benefits

• Opportunity for career progression and development

If you would like to know more, apply today as we’d love to hear from you!

Job Description

• To provide excellent customer service and product knowledge to the customer.
• Responsible for the daily operation, merchandising, sale, stocking, issuing invoices and display of the parts.
• Manage and control parts and warehouse material inventory, ensuring monthly stock take conducted and tally with system quantity.
• Coordinate with various departments on procurement requests.
• Sourcing for new suppliers for various materials.
• Assist to liaise for office maintenance servicing.
• Maintain CCTV Database.
• Any other Ad-hoc duties.

1. Lead and support QC team for daily QC activities by ensuring timely analysis, documentation, and review of RM/PM/FP/IPC/Stability and Process validation samples as per predefined standards.
2. Write and / or review controlled documentation related to laboratory operations or testing such as SOP's, analytical protocols, analysis reports, forms and validation documents.
3. Ensure compliance with FDA/USP/EP/ICH/ChP regulations and internal controlled procedures in the QC Laboratory.
4. Ensure readiness of QC Laboratory in internal / external audits.
5. Maintain data integrity in Quality Control activities and ensure appropriate traceability.
6. Initiate change control documents.
7. Lead and participate in stability program, method validations, technical transfer, method transfer and validation / qualification activities at the site.
8. Participate in New Product Introduction activities.
9. Lead and participate in laboratory investigations. Document laboratory investigation activities or review and approve laboratory investigation reports.
10. Participate in site corrective action / preventive action (CAPA) program. Ensure timely completion of all commitments made under QMS.
11. Lead and participate in key performance indicators for improving laboratory efficiency, monitoring equipment performance.
12. Lead QC Department training program by imparting training to new staff and comply with Analyst Qualification procedure.
13. Escalate the quality events, trends as appropriate to QC Head.
14. Remain abreast of current regulatory, pharmacopeia and cGMP trends.
15. Serve as subject matter expert on laboratory instrumentation and compliance issues.
16. Lead the QC team, evaluate competencies, assign responsibilities, monitor performance, counsel and provide guidance. Plan & monitor the training and development requirements, motivate staff appropriately to build a committed, motivated & competent team.
17. Participate in personnel decisions (interviewing, hiring, performance appraisals, promotions, termination, staff development, improvement plans) regarding subordinate staff.
18. Maintains a safe laboratory environment by implementing recommendations made by EHS.
19. Initiate CAPEX for equipment purchases.
20. Support in budget preparation for QC Laboratory.
21. Any other activities as and when assigned by the Superior.

EDUCATION:

Degree in science or related discipline (e.g. Chemistry, Chemical Engineering).

EXPERIENCE:

Minimum 8 years of quality control experience in pharmaceutical manufacturing industry and minimum 2 years of supervisory experience in managing team.

KNOWLEDGE & SKILLS:

1. Possess working knowledge of GMP in the pharmaceutical industry.
2. Excellent interpersonal and analytical skills, good verbal, and written communication skills.
3. Working knowledge of qualification, calibration and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
4. Working knowledge of method development, validation, verification of analytical method.
5. Familiarity of 21 CFR Part 11 requirements.

Job Description

• To provide excellent customer service and product knowledge to the customer.
• Responsible for the daily operation, merchandising, sale, stocking, issuing invoices and display of the parts
• Manage and control parts and warehouse material inventory, ensuring monthly stock take conducted and tally with system quantity.
• Coordinate with various departments on procurement requests.
• Sourcing for new suppliers for various materials.
• Assist to liase for office maintenance servicing.
• Maintain CCTV Database.
• Any other Ad-hoc duties.

Job Description:

• Pack and coordinate stock for deliveries, working with couriers and internal departments to ensure timely and accurate order fulfillment.
• Manage inventory control, including stock counts, receiving, issuing, and maintaining accurate inventory records and reports.
• Oversee e-commerce system updates, process orders, and handle physical goods, including lifting, carrying, and unloading as needed.

Job Requirements:
• Well organized, meticulous, good team player and detailed
• Proficient in Microsoft Office (Microsoft Word, Excel and Powerpoint)
• Able to work independently and good teamwork

Benefit
• AWS
• Medical and dental benefits

Aventir Group Pte Ltd
EA License: 24C2542

As a Site Technology Specialist, you will work with clinical sites and provide technical support and expertise related to technology (Kidney imaging, cell therapy, radiology and renal ultrasounds).

You will:

• Provide clinical sites with technical support and expertise related to technology (Nuclear medicine, kidney imaging, interventional radiology)
• Assist in the design and implementation of study related forms, guidelines and manuals related to technologies
• Coordinate data collection related to technologies, including but not limited to nuclear medicine, radiology, etc.
• Provide technical and initiation support to sites
• Identify, track, and report specific technical timepoints in the study related to study procedures including imaging, scans, and other technologies
• Determine technical resources needed for project implementation, and communicates needs to department managers
• Organize technical training for project teams
• Provide support to the project teams to ensure proper documentation of study-specific assessments related to study technologies
• Support site initiation preparation and performs technical visits to assist the site team with technical aspects of the study
• Assist and advises the site monitor in the area of study technologies
• Provide relevant technology-related information to Business Development for proposals
• Prepare for and attends Bid Defense Meetings
• Attend and presents at Investigator’s Meetings

Roles & Responsibilities

Job Description:

Prepare and analyze cost comparison

Obtaining quotations, liaising and negotiate with sub-contractors and suppliers

Responsible for measuring quantities and taking off

Prepare Variation Orders, claims, final accounts, settlement and sub-contractor payments

Prepare tender and contract documents, including bills of quantities with the architect and/or the client.

Undertake cost analysis for repair and maintenance project work

Assist in establishing a client’s requirements and undertake feasibility studies

Perform risk, value management, and cost control

Identify, analyze and develop responses to commercial risks

Prepare and analyze costings for tenders

Allocate work to subcontractors

Provide advice on contractual claims

Analyze outcomes and write detailed progress reports

Value completed work and arranged payments

Maintain awareness of the different building contracts in current use

Understand the implications of health and safety regulations.

All other QS related job

Job Requirements:

Degree / Diploma in Constructions Building or its equivalent

Ability in contract negotiation, contract administration & variation orders

Able to work independently, be meticulous, analytical with excellent problem-solving skills, proactive, a good team player & able to meet tight deadlines

This opportunity is ideal for the candidate who is looking to work with the top 1% billing client. As a key member of the team, you are highly collaborative, a self-starter, with strong problem-solving ability. Your track record speaks of you as a strategic operator who can get things done timely on brief and on budget.  You are organised, responsible and can work in an agile manner to meet the needs of fast-moving clients.

Key Responsibilities:

PROJECT DEVELOPMENT

• Strategise and ideate content led solutions proactively and in response to brief with the wider team. Work with teams to define best-in-class work quality and empower them to deliver in a way that exceeds our client’s expectations and monitor the overall perception of quality and reporting.
• Be responsible for inciting new briefs across existing and new clients.
• Identify causes and make recommendations to account leadership on how to improve ways of working.

PROJECT MANAGEMENT

• Responsible for the deliverables on assigned projects including brief response, briefing of the project to the third-party partners and client team management through the project to completion at highest level of quality.
• Ensure project revenue are up to date, from quotation to billing.

CONTENT EXPERTISE

• Knowledge of all aspects of our solutions across Insights, Strategy & Consulting, Content Creative & Production, Content Partnerships and Publishing & Distribution and how they apply across all aspects of the consumer journey.
• Continuous development and learning in and around the content space to advise and educate internal and external stakeholders.
• Understand how content is integrated into a media strategy and possess an understanding of social media data and landscape.
• Understand how brand and creative executions are developed into content led solutions and how they deliver on a client’s business objectives.
• Support team to develop case studies at the completion of each project.

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

We are currently hiring a talented ERP Process/ Master Data Specialist to join our Supply Chain team in Singapore. You will be acting as the first level of support for the team, using your SAP knowledge to support the MRP and Production Scheduling team in planning and execution.

This is a great opportunity to explore multiple supply chain disciplines in the team and carve out an extensive supply chain career within Lonza.

Key responsibilities:

• Responsible for SAP Material Master Data maintenance, integrity and governance for all MM views for Raw Materials, Semi- Finished Goods and Finished Goods.
• Responsible for Material Data integrity of SAP Bill of Materials, Resources, Recipes and Production Version for all Semi-Finished Goods, Finished Goods and Services.
• Responsible for ensuring the integrity of SAP MM / PP with the other SAP modules in use (SD, WM, QM, etc).
• Responsible for liaising with IT teams for SAP MM / PP system configurations issues and troubleshooting.
• Assist and support users with regular Master Data maintenance and upload to ensure data integrity.
• Full ownership of the update of Raw Material Specification.
• Support the revision of administrative changes Raw Material Specification.
• Communicate effectively with internal (including global sites) and external customers as related to the planning of raw materials, semi-finished goods and finished-goods.
• Assist with creation and update of documentation and procedures guidelines for ERP systems users.
• Ensure compliance with Supply Chain planning policies, procedures and ethics guidelines are maintained.
• Participate in Kaizen/Hoshin event(s) that provide the business with process improvements for cost and/or time savings opportunities.
• Complete necessary projects or any other duties as assigned by your Manager.

Key requirements:

• Bachelor’s Degree in Supply Chain Management of Business Management, Chemical Engineering and/or CPIM Preferred.
• Experience with maintenance, creation and/or modifications of codes and functions within an ERP systems. SAP preferred.
• Ability to self-check in an effort to ensure accuracy of work.
• Strong analytical skills. Prior experience using Business Intelligence systems to extract data and generate reports is nice to have.
• Experience with MS Office Suite.
• Excellent Communication skills and attention to details.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

Purpose: The role will be responsible for performing equipment assembly according to assembly drawings that are able to meet customers' requirements and specifications.

Key Area of Responsibilities:

• Perform basic & advanced machine electrical wiring works.
• Assemble electrical or electronic systems or support structures and install components, units, subassemblies, wiring, or assembly.
• Perform assembly per assembly drawing, Bill of Material, Electrical and Pneumatic control diagram.
• Perform alignment, test, process inspection, integration, and product release procedures.
• Inspect wiring installations, assemblies, and circuits.
• Perform reporting in shop floor control system
• To ensure quality, efficiency, and delivery performance.
• Perform periodical calibration and maintenance for assembly tools.
• Handling quality and shipment documents.
• Participate in programs for improvement.
• Practice work safety and good 5S housekeeping.

Qualification & Experiences:

• Nitec/Higher Nitec/Diploma in Mechanical Engineering/Electrical Engineering/Mechatronic Engineering or equivalent course
• Fresh graduates are welcome
• Preferably with Workplace safety & health in Metal work certification
• Knowledge on assembly drawing.

(Note: must be able to commit to 12-hour shift work)

Build a career with confidence

Carrier Global Corporation, global leader in intelligent climate and energy solutions is committed to creating solutions that matter for people and our planet for generations to come. From the beginning, we've led in inventing new technologies and entirely new industries. Today, we continue to lead because we have a world-class, diverse workforce that puts the customer at the centre of everything we do.

Key Responsibilities:

As an Inside Sales Specialist, you’ll be responsible for:

The Regional Data Center (DC) Inside Sales Engineer is a newly created role responsible for supporting the South Asia region with pre-sale activities. The successful candidate will be responsible for assisting the core team with bid pre-qualification preparation, costing, and quote generation. Additionally, the role involves liaising with various functions such as legal, finance, factory, and engineering to ensure compliance with internal processes and technical requirements of bids. The candidate will play a crucial role in supporting bid preparations and providing technical expertise.

• Assist in the preparation and pre-qualification of bids, ensuring alignment with project requirements and customer expectations.

• Prepare cost estimates and create detailed, accurate quotes for potential projects.

• Collaborate with legal, finance, factory, and engineering teams to ensure compliance with internal policies and technical standards.

• Support the Data Center Core Team in bid preparations and provide necessary technical input.

• Use Microsoft Excel and PowerPoint to analyze data and create compelling presentations.

• Utilize AutoCAD for technical drawings and HVAC considerations.

Requirements

• Understanding and experience of at least 5 years of bid preparation and qualification processes.

• Strong liaison skills for effective communication with cross-functional teams.

• Proficient in Microsoft Excel and PowerPoint for data analysis and presentation purposes.

• Skilled in AutoCAD and knowledgeable about HVAC systems.

• Advantageous to possess knowledge of in-country or regional tax and customs duty structures.

• Excellent organizational and time-management skills.

• Strong attention to detail and problem-solving abilities.

• Ability to work independently and collaboratively within a team.

• Good communication skills, both verbal and written.

Benefits

We are committed to offering competitive benefits programs for all of our employees, and enhancing our programs when necessary.

Our commitment to you

Our greatest assets are the expertise, creativity and passion of our employees. We strive to provide a great place to work that attracts, develops and retains the best talent, promotes employee engagement, fosters teamwork and ultimately drives innovation for the benefit of our customers. We strive to create an environment where you feel that you belong, with diversity and inclusion as the engine to growth and innovation. We develop and deploy best-in-class programs and practices, providing enriching career opportunities, listening to employee feedback and always challenging ourselves to do better. This is The Carrier Way.

Join us and make a difference.

Apply Now!

Job Responsibilities

To effectively manage the Digital Marketing functions of the company, Promotional Activities, Events, Sponsorships, CSR Projects etc.

• Responsible for planning, managing and executing digital marketing strategies, content and campaigns to achieve company’s objectives
• Plan, organize and manage digital marketing through SEM, SEO and social media to support overall marketing activities
• Control and manage digital marketing budget
• Effective negotiation and management of budget for wider media exposure for the brands
• Brainstorm, conceptualize and implement branding and marketing content and campaigns for brand portfolios to meet business objectives
• Liaise with other departments and agencies to achieve campaign objectives
• Conceptualize marketing content for online communication channels
• Monitor digital market and competitor activity
• Evaluate online marketing campaigns
• Be up to date with the latest digital marketing trends
• Provide weekly marketing report
• Other ad-hoc duties deem fit by superior

Requirements:

• Degree in Marketing, Communications or relevant studies
• Minimum 2-3 years of relevant marketing experience for B2C preferred
• Hands-on knowledge of Social media platforms, WordPress, Google Ads, is preferred
• Data analysis knowledge of digital marketing campaigns and KPIs
• Strong in language - both English and Mandarin preferred
• Excellent interpersonal and communication skills
• Creative, flexible with an eye for detail

Be part of something altogether life-changing!

Find what drives you on a team with a more than 70-year history of discovery, determination, and innovation. As a global leader in high-tech filtration, separation, and purification, Pall Corporation thrives on helping our customers protect people. Our products serve a wide range of markets, so if your interests lie along the spectrum of Life Sciences to Industrial, you’ll find a rewarding role here. For the exponentially curious, Pall is a place you can thrive and amplify your impact on the world.

Pall is proud to work alongside a community of nine fellow Danaher Life Sciences companies. Together, we’re pioneering the future of science and medicine, developing products that enable researchers in the fight to save lives.

Learn about the Danaher Business System which makes everything possible.

The position is part of the Pall Singapore Operations team and will be located in Benoi, Singapore.

In this role, you will have the opportunity to:

• In the project phase to assist in installation, hook-up, start-up, qualification for all facilities equipment.
• To work closely with engineers and external vendors to resolve technical problems.
• To support daily facilities maintenance, troubleshooting, preventive, corrective maintenance, spare parts management and establishing equipment maintenance documents.

The essential requirements of the job include:

• Tertiary education in Mechanical, Mechatronics, Electrical & Electronics Engineering, or NITEC holders with > 5 years of experience.
• Must possess basic computer skills (MS Office)
• Analytical, systematic in problem solving approach, independent and a good team player.
• Experience in maintaining CDA, Chiller system, Chemical Supply System, UPW/DIW, wastewater treatment plant, ACMV, fire protection system, AHU/MAU & cleanroom.

It would be a plus if you also possess previous experience in:

• Working experience in Cleanroom environment will be an advantage.
• Working experience in Chemical environment will be an advantage.

Build a career with confidence.

Carrier Global Corporation, global leader in intelligent climate and energy solutions is committed to creating solutions that matter for people and our planet for generations to come. From the beginning, we've led in inventing new technologies and entirely new industries. Today, we continue to lead because we have a world-class, diverse workforce that puts the customer at the centre of everything we do.

Role Responsibilities:

• Manage supplier and their performance to ensure uninterrupted supply and quality.
• Create local/regional/global savings opportunities.
• Support the delivery of working capital targets and creditor targets for the site.
• Ensure control and responsibility for expenditure of company funds.
• Develop and implement business procurement strategies for assigned products, consistent with global or local procurement plans.
• Negotiate agreements with suppliers for raw materials within the value of spend.
• Establish project management discipline for identifying and tracking tasks, resources, milestones, and measures for projects.
• Communicate with key stakeholders on projects to ensure mutual understanding of objectives and priorities.

Requirements:

• Diploma or Degree in Business or Engineering with
• Minimum 5 years’ relevant purchasing experience
• Good understanding of purchasing processes and systems
• Excellent communication and interpersonal skills
• Effective cross-functional team member with good conflict resolution skills
• Good team player
• Strong negotiation skills
• Customer focused and results driven
• Proficiency in MS office

Benefits

We are committed to offering competitive benefits programs for all of our employees and enhancing our programs when necessary.

Our commitment to you

Our greatest assets are the expertise, creativity and passion of our employees. We strive to provide a great place to work that attracts, develops, and retains the best talent, promotes employee engagement, fosters teamwork and ultimately drives innovation for the benefit of our customers. We strive to create an environment where you feel that you belong, with diversity and inclusion as the engine to growth and innovation. We develop and deploy best-in-class programs and practices, providing enriching career opportunities, listening to employee feedback and always challenging ourselves to do better. This is The Carrier Way.

Join us and make a difference.

Apply Now!

The Role

As the Customer Success Specialist, you'll be at the forefront of providing support to our partner restaurants. This is a role that involves a high volume of inbound and outbound communication with our partner base. To ensure we deliver exceptional support throughout the various stages of the partner lifecycle, our team operates as three focussed verticals:

1. Onboarding: responsible for guiding newly acquired partners through their first three months with Quandoo

2. Partner Support: our frontline team handling all incoming communication channels - phone, chat and email

3. Growth & Retention: nurtures the partner base post-onboarding with proactive, regular outreach

Your initial placement in one of the verticals will be based on your experience and the needs of the business. Inline with our commitment to personal development, you will have the opportunity to gain experience from other verticals to become an all-round customer success expert.

The Responsibilities:

• Provide a high-level of support to our partners restaurants

• Understand the partner lifecycle and how the three verticals work together 

• Work closely with the wider Customer Success team to ensure goals are being met across our partner base in the APAC region

• Become a trusted advisor to our partner restaurants by helping them gain the most out of our platform and reach optimum value

• Maintain an expert level understanding of our product and service to clearly communicate the value

• Have a commercially minded approach to nurturing our partner base

• Proactively engage with partners to mitigate churn risk through early assessment of their use of the Quandoo service and product

• Be the voice of our partners to provide internal feedback on how we can improve