· Conduct Microbe Test & Physico-chemical Test

- Shelf life study

- Online Testing

· Prepare sensory samples for sensory tasting

· Daily calibration of laboratory equipment

· Inventory update and clearing of References and Retention samples

· Maintenance of lab equipment

· Fill up QC record forms

- Finished Product Analysis Record Form

- Raw Material Evaluation form

- Daily Sieve Physical Contamination Check & Equipment Cleaning and Sanitation Record

· Document filing

· Sample Labelling

· Data Entry into Computer System

- Incoming Record

- Microbe & Physico-chemical Record

- Inventory update

· Key in physical and microbe data

· Preparation of solutions for lab use

· Ensure the cleanliness and orderliness of the physical lab and microbe lab, and washing of lab wares.

· Any other appropriate duties and responsibilities as assigned by the Management.

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering(Civil) or equivalen.
• At least 2 years(s) of working experience in the related field is required for this position.
• Required Skill(s): Understand drawing, Quantity take off, Prepare BQ, Familiar with costing, Supplier sourcing, Contract administration.
• Preferably Senior Executive specialized in Engineering-Civil/Construction/Structural or equivalent.
• Familar with structural steelworks.
• Other QS duties as assigned from time to time.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

1. Lead and support QC team for daily QC activities by ensuring timely analysis, documentation, and review of RM/PM/FP/IPC/Stability and Process validation samples as per predefined standards.
2. Write and / or review controlled documentation related to laboratory operations or testing such as SOP's, analytical protocols, analysis reports, forms and validation documents.
3. Ensure compliance with FDA/USP/EP/ICH/ChP regulations and internal controlled procedures in the QC Laboratory.
4. Ensure readiness of QC Laboratory in internal / external audits.
5. Maintain data integrity in Quality Control activities and ensure appropriate traceability.
6. Initiate change control documents.
7. Lead and participate in stability program, method validations, technical transfer, method transfer and validation / qualification activities at the site.
8. Participate in New Product Introduction activities.
9. Lead and participate in laboratory investigations. Document laboratory investigation activities or review and approve laboratory investigation reports.
10. Participate in site corrective action / preventive action (CAPA) program. Ensure timely completion of all commitments made under QMS.
11. Lead and participate in key performance indicators for improving laboratory efficiency, monitoring equipment performance.
12. Lead QC Department training program by imparting training to new staff and comply with Analyst Qualification procedure.
13. Escalate the quality events, trends as appropriate to QC Head.
14. Remain abreast of current regulatory, pharmacopeia and cGMP trends.
15. Serve as subject matter expert on laboratory instrumentation and compliance issues.
16. Lead the QC team, evaluate competencies, assign responsibilities, monitor performance, counsel and provide guidance. Plan & monitor the training and development requirements, motivate staff appropriately to build a committed, motivated & competent team.
17. Participate in personnel decisions (interviewing, hiring, performance appraisals, promotions, termination, staff development, improvement plans) regarding subordinate staff.
18. Maintains a safe laboratory environment by implementing recommendations made by EHS.
19. Initiate CAPEX for equipment purchases.
20. Support in budget preparation for QC Laboratory.
21. Any other activities as and when assigned by the Superior.

EDUCATION:

Degree in science or related discipline (e.g. Chemistry, Chemical Engineering).

EXPERIENCE:

Minimum 8 years of quality control experience in pharmaceutical manufacturing industry and minimum 2 years of supervisory experience in managing team.

KNOWLEDGE & SKILLS:

1. Possess working knowledge of GMP in the pharmaceutical industry.
2. Excellent interpersonal and analytical skills, good verbal, and written communication skills.
3. Working knowledge of qualification, calibration and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
4. Working knowledge of method development, validation, verification of analytical method.
5. Familiarity of 21 CFR Part 11 requirements.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

As a member of the Control & Instrumentation team, you will be responsible for the effective maintenance of control systems and instrumentation in the power plant to achieve high reliability and availability in accordance with statutory, regulatory, and safety requirements.

Responsibilities:

• Ensure maintenance work is executed effectively, efficiently and complied with safety and regulatory requirement.
• Respond and attend to plant failures and forced outages to ensure timely and proper rectification and restoration.
• Plan and ensure safe and timely execution of plant overhaul activities.
• Recommend and implement modification, upgrading and installation plans for plant system and equipment for enhancement, availability and reliability improvement.
• Manage the procurement of parts and services to meet the maintenance needs of the section, including spare parts and external services for routine and breakdown maintenance.
• Lead and manage a team of technical officers and technicians.
• Development of staff.

Requirements:

• Degree in Electronic & Electrical Engineering or equivalent recognised by the Professional Engineers Board.
• Possesses sound knowledge of Control and Instrumentation and good working knowledge of safety and statutory requirements.
• Driven self-starter with strong work ethics.
• Team player with strong analytical, technology and communication skills.
• Is available on standby after office hours for emergency calls.
• Knowledge in cyber security will be advantageous.
• Have a safety mindset and display good workplace safety behaviour.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

We are looking for a QA Engineer proficient in Automation Testing, with keen interest in FinTech.

• Gain exposure to the FinTech Industry.
• Salary package up to $4,500 + AWS + VB (~2 months).
• Dynamic working environment.

Responsibilities

• Design, develop, and maintain automation frameworks for software & Hardware testing, process automation, and data integration.
• Create detailed test cases, test plans and maintain salable automation frameworks to support continuous integration and delivery processes.
• Execute automated test cases and analyze test results to identify defects, performance issues, and areas for improvement.
• Integrate automated tests with CI/CD pipelines.
• Identify areas where automation can improve operational efficiency and reduce manual intervention.
• Document automation processes, test cases, and results for reference and auditing purposes

Requirements

• Tertiary education in Computer Science or related field.
• Min 3 years’ experience in automation development using Python / Selenium / Appium.
• Strong knowledge of software quality assurance methodologies, tools and processes.

Interested candidates may click on apply or apply via email to [email protected] (indicating Job ID J50775 for faster processing).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

• Marine Electrical Equipment (MNC company)
• Basic $3000 - $4000
• *AWS + Bonus + 14 days AL
• Mon-Fri (8.15am-5.45pm)
• Company transport provided: CCK, Bukit Batok, Boon Lay

Responsibilities

• Inspection & Quality Control: Perform incoming and outgoing inspections according to established procedures, including factory routine tests and official tests for switchboards. Ensure that non-conforming products are separated and rejected as necessary.
• Quality Documentation: Maintain quality records and file data. Highlight quality issues to the appropriate management for action.
• Authorization & Release: Authorize the rejection of unsatisfactory parts and the release of conforming parts for storage and customer delivery.
• Customer Satisfaction & Warranty: Ensure the successful testing and commissioning of switchboards on-site or on vessels, and address warranty claims or customer quality complaints.
• Problem Prevention & Solutions: Initiate actions to prevent non-conformities, recommend solutions, and verify their implementation.
• Safety, Calibration & Housekeeping: Follow safety rules, use calibrated instruments for inspections, maintain good housekeeping in the QA department, and assist the manager in meeting quality objectives.

Qualifications

• Min ITE/ Diploma in Electrical Engineering
• At least 2 years of QA experience

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23116143 | Lucky Lee

Job Description & Requirements

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

.Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Responsibilities

• Understand/develop technical design specification/requirements and associated document relevant to project.
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and system commissioning on site.
• Produce test document and training material.
• Conduct training to customer
• Provide technical support to sales and maintenance team

Requirement

• Possess Diploma or Bachelor's Degree in Mechatronic or Electrical & Electronic Engineering
• Ideally with 2 or more years of DCS/PLC/SCADA/Harmonas programming experience
• Ability to read electrical/P&ID schematics
• Able to work in a collaborative team environment
• Possess good interpersonal and communication skills
• Positive working attitude with pleasant personality
• Independent problem solver with a desire to learn new skills and technology
• Work under pressure to meet project deadlines in a multi-tasking environment
• Candidates with no relevant working experience are welcome to apply

We regret that only shortlisted candidate(s) will be contacted.

About the job

Company Description

Explore the future of communication and finance with Vama – a cutting-edge app that integrates instant messaging and secure payments, incorporating the latest Fintech technology.

Role Description

This is a full-time on-site role for a Software Quality Assurance Engineer at Vama in Singapore. The Software Quality Assurance Engineer will be responsible for software quality, quality assurance, software development, manual testing, and ensuring the highest quality of software across mobile (iOS and Android), desktop (React Electron), and cloud platforms (GCP). You will work closely with development teams to create and execute test plans, identify bugs, and ensure a seamless user experience.

Key Responsibilities:

• Designed, developed, and executed detailed manual test plans, test cases, and test scripts for iOS, Android, and React Electron desktop applications.
• Perform functional, regression, and exploratory testing to identify defects and ensure product stability and performance.
• Collaborate with cross-functional teams, including developers, product managers, and designers, to understand product functionality and requirements.
• Participate in test planning, estimation, and coordination of testing activities within an Agile development environment.
• Identify, document, and track bugs using QASE or similar test management tools.
• Verify bug fixes and ensure they meet the required specifications.
• Integrate testing processes with continuous integration pipelines (CircleCI) for improved development workflows.
• Ensure proper documentation of testing results and provide feedback for product improvements.
• Test cloud-based applications hosted on Google Cloud Platform (GCP), ensuring scalability and performance requirements are met.

Requirements:

• Experience in Manual Testing: Proven experience in manual testing across web, mobile (iOS/Android), and desktop (React Electron) applications.
• GCP Expertise: Strong knowledge of Google Cloud Platform (GCP) and testing cloud-based applications.
• Mobile Testing: Experience in testing mobile applications on iOS and Android platforms.
• Desktop Testing: Experience with desktop applications, particularly React Electron.
• Test Management Tools: Proficiency with QASE or similar test management platforms for documenting and managing test cases.
• Continuous Integration Tools: Hands-on experience with CircleCI or other CI/CD tools.
• Strong Analytical Skills: Ability to analyse complex systems, debug issues, and provide detailed reports.
• Attention to Detail: A meticulous approach to testing to ensure all edge cases are covered.
• Collaboration: Strong communication skills and ability to work in a team-oriented environment.

Qualifications

• Software Quality, Quality Assurance, and Software Quality Assurance skills.
• Experience in Manual Testing and Software Development.
• Strong analytical and problem-solving abilities.
• Knowledge of testing methodologies and tools.
• Effective communication and collaboration skills.
• Attention to detail and accuracy.
• Bachelor's degree in Computer Science or related field.
• Certifications in quality assurance are a plus.

Purpose of Position

• Provide maintenance and engineering support for process control systems to ensure safe and reliable operation of the plant.
• Provide technical and engineering support for projects and modifications related to control system to achieve business and operational objectives.

Principle Responsibilities

• Responsible for the maintenance and engineering of all process control systems which may be installed in the plant or externally at customers' site.
• Perform fine-tuning, troubleshooting, modification and programming of the Control System as needed to improve system performance and optimize process operation needs.
• Response to 24-hour emergency call-out and provide night-shift support during plant startup, shutdown and as requested by Operation Team.
• Work closely with the Instrument Team to troubleshoot and resolve instrumentation problems.
• Work with the Project Team to develop requirements and/or specifications of control system for projects and modifications; supervise & implement the project works according to the schedule and requirements.
• Plan and execute preventive and corrective maintenance works for plant turnaround.
• Perform strategy planning for control system expansion, upgrading and renewal.

Job Requirements

• Familiar and hand-on with the engineering tools and programming languages of control systems (Honeywell, Siemens PCS7 and Triconex), able to make program modifications and configuration changes confidently.
• Experienced and familiar with various phases of project works such as engineering, fabrication & construction and commissioning.
• Knowledge and experience with computer system networking, server/client and virtualization architectures.
• Degree in Electronics/Electrical Engineering, major in Control is preferred.
• Minimum 5 years relevant experience working and maintaining Honeywell DCS, Siemens PCS7, Triconex PLC and etc.

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate produces design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design that are cost-effective, meet the specification's requirements, and can be constructed and commissioned effectively. The term ‘cost’ embraces all costs associated with the design and its subsequent construction.
• The candidate shall provide and carry out to be cost effective the whole out turn cost of the design solution must be considered including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have extensive expertise in the technical execution of process plant systems within an intricate water industry.
• The candidate shall be proficient in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have excellent knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have excellent proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall ensure that standard practices are utilised wherever possible.
• Maintain competitiveness.
• The candidate shall provide estimates and feedback for the Proposals department as required.
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• Assist in developing procedures and processes.
• Monitor and review the procedures and processes.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• Ensure co-ordination of designs with all other disciplines internal and external to ensure that the design processes carried out on the contract are coordinated for the benefit of the contract as a whole.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff
• Assist in ensuring a safe working environment for all staff
• Reduce waste to a minimum from all departmental activities
• Ensure designs take account of environmental issues
• The candidate shall ensure that design takes full regard for all health and safety requirements.
• The candidate shall ensure that design takes full regard of all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 8 years of experience in Instrumentation, Control, & Automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet the project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 3 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 5 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Description

• Perform troubleshooting, service & calibration work both at site & in-house
• Performs periodic, predict, preventative, repair and maintenance services for Company’s equipment and associated controls
• Overhaul, install, calibrate control valves and field instruments
• Supervising & managing of Sub-contractor to carry maintenance & servicing works
• Record servicing & maintenance data and generate service report

Requirements :

• Possess NITEC/Higher NITEC/Diploma in Mechanical / Mechatronics Engineering
• Communicate effectively, Customer orientation, Flexibility and self learning
• Can do attitude, Teamwork
• Energetic and good interpersonal skills
• Candidate without experience are welcomed to apply

We regret that only shortlisted candidate(s) will be contacted.

Job Title: DCS Engineer

Work Location: Jurong Island

Expected Start Date: 01 January 2025

Responsibilities for this position may include but not limited to:

• Provides engineering design, troubleshooting and maintenance of Distributed Control System (DCS)
• Troubleshoot day-to-day process problems related to process control applications, controller tuning and batch receipes execution
• Supports Process Hazard Analysis and implements process changes through a Management of Change Process
• Maintains up-to-date documentations for the DCS
• Conducts training programs for operators on DCS & Batch Receipes
• Initiates and manages DCS hardware life cycle, software and process control network upgrades
• Leads / supports development and execution of control system pojects, and greenfield projects

Required Qualifications

• Bachelor's Degree in Electrical / Electronics / Instrumentation and Control / Chemical from an accredited university
• Minimum 5 years of related work experience in DCS in the refinery, petrochemical or checmical industry
• Strong analytical / trouble-shooting skills
• Good interpersonal and communication skills
• Able to work independently in a team and in a diverse enviroment.

Preferred Qualification:

• Knowledge and work experience in Honeywell DCS System (TPS/EPKS DCS and Experion Batch)
• Knowledge in SQL Programming / Power BI, Process Controls Domain & Network adminstration.

Intersted candidates, do drop me your resume @ [email protected]