Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Title: Project Engineer (ID6058)
Location: Tuas
Working Hours: Mon to Fri 8.00am-5.15pm
Salary: $3500

Job Description
• Involve in validation documentation for new machine/product/process/material
• Initiate product reviews. Verifies and test products. Responsible for validation, trial run for new projects and customers.
• Responsible for change control process and procedure development and implementation.
• Responsible for new job development.
• Provide technical support to customers.
• Provide QA support to project development
• Involved in new machine installation and process improvements.
• Other related duties as assigned by the managing director/ QA manager

Requirement:
• Qualification –Diploma/Degree, minimum 3 years working experience in manufacturing environment
• Exposure in Quality Assurance/Control/Computer software/Electrical advantage.
• Company transport provided at Lakeside MRT, Jalan Boon Lay & Pioneer Mall & Pioneer MRT

Responsibilities

• Responsible for ensuring products produced meet the product and customers' quality requirement
• Responsible for developing and improving the processes to gain productivity, efficiency, quality and costs.
• Responsible for coordinating NPI/NPQ activities with details and meeting timeline.
• Responsible for supporting and resolving daily technical issues in operations
• Responsible for supporting analysis of failures from yield loss, reliability failures, new products, new materials.

Requirements

• Min Diploma in Electronic Engineering, Material Science or relevant
• Min 5 years of working experience in semicon assembly and test environment
• Experience in Assembly FOL of dicing, die attach, wire bond
• Experience in maintenance of assembly and test machines of dicing, die attach, wire bond encapsulation, testing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Description

• Server-side design and development of the services/ systems/platforms used by our products and our users.
• Write high-quality, clean, simple, and maintainable code; build common libraries.
• Analyse requirements, design, and develop functionalities based on product requirements.
• Understand the product thoroughly, constantly optimize the product, identify and fix problems, and improve stability and user experience.
• Design and implement various supporting tools as required.
• Collaborate with other software engineers, product managers, user experience designers, and operations engineers to build the product.

Job Requirements

• Bachelor's degree or higher in Computer Science, Engineering, or related fields.
• In-depth understanding of computer science fundamentals (data structures and algorithms, operating systems, networks, databases, etc.).
• Familiar with OOP, Restful API design, and relational database design.
• Familiar with Go, Python, or other OOP programming languages.
• Familiar with Linux development environments, docker, and Nginx.
• Passionate about coding and programming, innovation, and solving challenging problems.
• Experience in web security is preferred.
• Experience in design and development of large-scale distributed systems is preferred.

Responsibilities

• Responsible for providing support to new product development teams
• Responsible in advising customers in the areas of high-speed signal transmission and technology development, in accordance with department strategy and objectives in terms of quality and delivery time.
• Responsible for defining, planning and executing signal integrity deliverables, including modeling, simulation, and testing. Communicate SI deliverables via reports and presentations.

Requirements

• Min Degree in Electronics Engineering, Physics or its equivalent
• Min 3 years of working experience in designing and supporting high speed electrical components
• Proficient in software tools, finite elements simulation of electro-mechanical components as well as mathematical derivation and modeling of electro-mechanical parameters

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Position

This a very hands-on technical role to drive continuous improvement initiatives on top of day-to-day BAU support. We want someone with fresh and relevant ideas who is passionate about learning new things and wants to develop themselves further.

As we are covering the bank’s global operations, you will work in rotational shifts** and also be occasionally doing on-call support*** during non-business hours. This will be an opportunity to have a better perspective of what can be further improved in production!

**On call support: This covers 7 consecutive days during non-business hours to manage escalated incidents and to work on planned changes, weekend included.

***Rotational shifts: Members in the team will rotate accordingly around 3 shifts (time will shift to an hour later during the daylight saving time period in the year).

• Morning: 7am-4pm
• Afternoon:2pm-11pm
• Evening: 5pm-2am

Main responsibilities

You will mainly be responsible for:

• Providing primary operational technical support and assist the functional support teams
• Improving complex operations (DRP, Migrations, Major maintenance etc.)
• Improving reliability and quality of our systems (automation, monitoring, alerting, security, RCA etc.)
• Reducing time-to-market by implementing CICD pipelines where possible
• Managing technical issues, escalations and ensuring good level of delivery
• Maintain, improve and standardize existing workflow processes and framework
• Promoting knowledge sharing within the organization (trainings, documentations etc.)
• Bridging the gap between Dev and Ops
• Maintain programmable code outlined in technical instructions and specifications for operating systems.

Qualifications and Profile

At least a Bachelor’s degree in any of these faculties:

• Computer Science
• Information Technology
• Programming & Systems Analysis
• Science (Computer Studies)

Functional

• Experience in a banking environment in a plus.

Technical

• Minimum 3 years of experience with UNIX environments
• Minimum 3 years of experience in scripting languages such as Python, Powershell
• Minimum 2 years of hands on experience in any of these tools and technologies such as Ansible, Gitlab, Azure Devops, Docker, Kubernetes
• Experience with task schedulers such as Control-M
• Good understanding of IT ecosystems and application architectures
• Knowledge about

- CICD pipelines, ITIL practices, Agile practices, Lean

- Observability tools such as Grafana, Kibana, Prometheus, AppDynamics or Dynatrace is a plus

Other Professional Skills and Mindset

• Good analytical and problem solving skills
• Proactive and able to propose new ideas
• Positive attitude towards continuous learning and improvement
• Team player
• Curious about new technologies

Interested applicants, please email your resume to Shaun Quek Yew Meng

Email: [email protected]

CEI Reg No: R1660732

EA Licence No: 99C4599

Modec Offshore Production Systems (Singapore) Pte Ltd is a leading provider of solutions to the Floating Offshore Oil & Gas market for more than 50 years and we are currently looking for a Document Controller to join us.

Being part of Modec means being the protagonist of a challenging career and being in touch with the latest deep-water production systems, knowing that your career begins in Singapore, but your talent can take you anywhere in the world. If you want to be one of the greatest in the market, this is your opportunity!

We are currently based at Metropolis, Buona Vista, Singapore.

Overall Job Purpose

To support Global Process Safety’s mission to ensure MODEC prevents any Major Accident
Events on our fleet

Under guidance, to prepare the fundamental engineering deliverables of Process Safety for
the assigned project as per the specified technical requirements, timelines and budget, and to
identify basic engineering issues and resolve them.

Core Responsibilities

• Identifies the scope and prepares the scope of work document covering the purpose, criteria and scope of HAZID, HAZOP, FRA, ERA, and QRA, exhaust gas and vent dispersion analysis, dropped object analysis, ship collision analysis, F&G detector mapping study, Evacuation, Temporary Refuge Rescue Analysis (ETRERA), predictive noise study, Structural fire risk analysis, Emergency Systems Survivability Analysis (ESSA), Human Factors Analysis, SIL assessment, and ALARP Evaluation.
• Performs review of arrangement of active fire protection (including coverage), escape route, life saving appliances, fire and gas detectors locations (coverage), PAGA Layout, hazardous area classification and schedule, General Arrangement, exhaust and vents location, Process PFD, P&ID, Marine P&ID, HVAC D&IDs, ESD Philosophy/hierarchy, F&G and ESD C&E, PFP Philosophy/spec/drawings, firewater hydraulic analysis (ring main, deluge, cargo deck foam) and surge analysis, and safety layout.
• Develops Bow‐Ties and prepare Performance Standards for all SCEs identified for the project
• Performs / Reviews in‐house studies such as dropped object study, 2D vent dispersion study, Evacuation, and Temporary Refuge Rescue Analysis (ETRERA), and any other Technical Notes
• Performs/reviews in‐house calculation such as fire water and foam demand and cargo vent dispersion using PHAST software.
• Collects and reviews input data for predictive noise study, dropped objects analysis, and exhausts & vents dispersion study, ship collision analysis, Evacuation, and Temporary RefugeRescue Analysis (ETRERA), etc.
• Reviews technical requisition, technical bid evaluation, vendor documents to highlight any discrepancies for safety systems and verify the design HSE action responses against the drawings and highlight any discrepancies for safety systems.

Qualifications & Relevant Experience

• Minimum 7 years of relevant working experience in Process Safety engineering in oil and gas sector for graduates or at least 12 years of relevant working experience for diploma holders.
  For Master degree holder, minimum of 6 years relevant working experience.
• Is aware of applicable industry standards, Company standards, specifications and procedures
  for his/her functional area.
• Is competent in understanding on process safety inputs as well as accurate usage of data
  extraction sheet during preparation of process safety deliverables
• Bachelor in Naval Architect/Chemical Engineering/Environmental
  Engineering/Mechanical Engineering or higher. Alternatively, Diploma in Engineering with
  several years of relevant working experience.
• Understanding and proficiency in BowTieXP, PHAST, PIPENET, PHA‐Pro

Modec is committed in creating a diverse and inclusive workplace. We take affirmative action to ensure equal opportunity for all applicants regardless of race, religion, national origin, gender, gender identity, sexual orientation, disability, age, or other legally protected characteristics

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for development of new products and product improvements
• Responsible in performing the whole cycle of product design
• Responsible for designing and devleoping of quality product and ensuring manufacturability with other engineering functions involved in product development.
• Responsible in ensuring product designs are validated per customer requirements, respecting international industry standards

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Product Design Development
• Proficient with Pro-Engineer/ CREO/ANSYS/ Autocad

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing engineering expertise and technical assistance for the installation, maintenance, troubleshooting, repair and modification of facilities and equipment, development and implementation of maintenance procedures and techniques for safe, reliable and efficient operation of the plant.
• Responsible for participating in production machineries installation, modification and maintenance
• Responsible in ensuring that all process equipment, utility installations and electrical installations are maintained and running at optimum efficiency.
• Responsible for defining and generating evaluation plan, and execute qualification plan for alternate component replacement or cost reduction.
• Responsible for working with supplier and procurement team to drive cost reduction and quality issu

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 5 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring products produced meet the product and customers' quality requirement
• Responsible for developing and improving the processes to gain productivity, efficiency, quality and costs.
• Responsible for coordinating NPI/NPQ activities with details and meeting timeline.
• Responsible for supporting and resolving daily technical issues in operations
• Responsible for supporting analysis of failures from yield loss, reliability failures, new products, new materials.

Requirements

• Min Diploma in Electronic Engineering, Material Science or relevant
• Min 5 years of working experience in semicon assembly and test environment
• Experience in Assembly FOL of dicing, die attach, wire bond
• Experience in maintenance of assembly and test machines of dicing, die attach, wire bond encapsulation, testing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing support on maintenance project.
• Responsible for handling system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.

Requirements

• Min Diploma in Electrical/Electronic Engineering, Computer Science/ Information Technology or equivalent.
• Min 2 years of working experience in managing LAN / WAN / Routers / Switches / DNS / Firewall and Milestone System

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job description:

• Assist in projects planning and execution, perform network upgrades and migrations
• Work with vendors to deliver the project scope and meeting project deadlines
• Provide network support to end users, manage incidents, problems and change requests
• Proactively monitor network performance, ensuring high network availability and smooth operations
• Responsible for keeping network operations documents and SOPs up-to-date
• Perform evaluation, proof of concept and provide recommendations
• Manage daily network operations

Job Requirements:

• A Bachelor’s degree in Computer Science, Computer Engineering, IT or equivalent
• Must be CCNA certified, CCNP preferred
• Working knowledge plus at least a year’s experience in networking technologies like Structured Cabling, WAN, LAN, VPN, Network Security, Wireless, iBGP, eBGP, Routing Protocol, OSFP etc.
• Hands on experience in implementing, administering and troubleshooting network infrastructure devices, including cisco, Brocade routers, Dell enterprise and cisco switches, network firewall, IPS, SIEM, vulnerability assessment and monitoring tools (e.g. Cacti, MRTG, etc.) Experience in IPv6 and Data Centre operations an advantage
• Familiarity with Linux (as a user and system), container technology, security concepts, project management and ITIL processes will be added bonuses
• Familiar with Dense wavelength division multiplexing DWDM) is a plus.
• Familiar with basic Linux administration is a plus.
• Minimum 2 years of relevant experience

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and developing software for automated semi-conductor process equipment.
• Responsible for improving equipment performance through CIPs and other development initiatives
• Responsible for supporting field work to upgrade and resolve customer issues.

Requirements

• Min Diploma in Electrical & Electronics Engineering/Computer Studies or equivalent.
• Min 5 years of working experience in programming on Windows (XP and above) environment.
• Experience in C++, VC++, MFC, SQL, OOP, using Servo, Stepper Motion Controller, Analog Device and High Speed I/O
• Knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Understand the process and practices related to GNC support Templates and Standard Operating Procedures
• Ownership on critical incidents for customers to deliver resolution with in SLA.
• Perform IOS upgrades and patches to fix software and ensure that the environment is bug/vulnerable free by keeping system with up-to-date software.
• Troubleshoot production issues and network/security problems to fix any infra related issues and work with principal vendors and customer to provide the resolution within the proposed timelines.
• Performing RMA for hardware failures and replacement in production environment
• Perform health checks for the critical environments and ensure the systems running up to the standard and no potential failures.
• Setup staging and simulation for customer activities for critical jobs before actual tasks in production environment.
• Working in 24/7 operations centre and standby role for after office hours support on monthly rotational basis
• Able to follow and meet customer SLA for all the incidents and requests / responsible for the service delivery
• Undertake escalation for Enterprise Networking related matters from level 1 helpdesk engineers, perform level 1/2/3 on site troubleshooting and hardware field replacement works for customers.
• Responsible for updating technical documentations for configuration changes made via helpdesks and/or managed services customers.
• Responsible for opening and closing of support tickets when applicable and providing timely updates to helpdesk personnel and customer for support cases that has been allocated to you

The Individual and their Experience:

• Knowledge of ITIL principles, particularly Incident, Change, Problem and Service Management
• Minimum 2-3 years of relevant experiences in network operations including network, wireless, security technologies.
• Experienced on working with vendors and customer on outage situation and provide direction to juniors and customer on recovering services affectively.
• Hands on experience in operations and BAU for fixing user/infra issues in production environment is essential.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

Responsibilities & Duties

• Responsible for providing engineering expertise and technical assistance for the installation, maintenance, troubleshooting, repair and modification of facilities and equipment, development and implementation of maintenance procedures and techniques for safe, reliable and efficient operation of the plant.
• Responsible for participating in production machineries installation, modification and maintenance
• Responsible in ensuring that all process equipment, utility installations and electrical installations are maintained and running at optimum efficiency.
• Responsible for defining and generating evaluation plan, and execute qualification plan for alternate component replacement or cost reduction.
• Responsible for working with supplier and procurement team to drive cost reduction and quality issue.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 5 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Maintain standards and quality processes in food manufacturing operations;

• Conduct daily in-process quality control inspections at production lines to ensure alignment with internal requirements and Good Manufacturing Practices
• Maintain integrity, accuracy and completeness of QC data and records
• Perform routine calibration and maintenance of equipment
• Assist in export documentation consolidation and Health Certificate application
• Assist in monitoring and inspecting company infrastructure, equipment and utilities
• Develop and implement quality control procedures and protocols to improve overall product quality and consistency.
• Inspect in-coming and out-going products according to receiving and shipping policy
• Review and validate supplier raw material records and results (COA)
• Process improvements initiatives across the company

Conduct tests for food quality and packaging;

• Sensory evaluation of products aligned with specification
• Perform product sampling for laboratory tests

Rectify non-compliance issues (Customer Complaints / Audit findings);

• Support traceability investigations into lapses in quality, hygiene standards and non-compliance to quality standards. Conduct investigation and follow up with corrective action

Conduct training for production staff on quality control procedures, GMP practices, and food safety protocols;

Job Requirements

• Minimum 1 year of relevant working experience / Diploma in Food Science or related field.
• Knowledge of food safety standards and GMP principle
• Proactive, willing to learn and good follow-up skills
• Able to work independently with minimal supervision

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Lead the design and development of cutting-edge 3D machine vision systems tailored for industrial robotic use cases, ensuring high precision and performance.
• Collaborate closely with cross-functional teams, including robotics engineers and software developers, to integrate 3D machine vision technology seamlessly into robotic applications.
• Oversee the selection and integration of 3D sensors with robotic systems, optimizing their performance and accuracy.
• Develop and refine algorithms for real-time data acquisition, image processing, and object recognition to enable advanced visual perception capabilities for robotic systems.
• Implement advanced machine learning and computer vision techniques to enhance the capabilities of machine vision, including object tracking, defect detection, and scene analysis.
• Troubleshoot and debug technical challenges related to machine vision technology, ensuring robust and reliable operation within industrial environments.
• Stay current with the latest advancements in machine vision, computer vision, and industrial robotics to contribute innovative solutions to the product roadmap.
• Collaborate with stakeholders to gather requirements, provide technical insights, and present product updates.

Requirements:

• Bachelor's or Master's degree in Computer Science, Robotics, Electrical Engineering, or a related field.
• Significant experience in the design and development of 3D machine vision systems, particularly in industrial or robotic applications.
• Proficiency in programming languages such as Python, C++, and experience with relevant libraries and frameworks.
• Strong knowledge of 3D sensors, processing and manipulation of point cloud and mesh, sensor calibration techniques, repeatability testing techniques, hand-eye calibration, encoder integration with 3D sensors.
• Expertise in machine learning and deep learning for advanced data analysis, object recognition, and image processing will be a bonus.
• Familiarity with 3D machine vision software platforms and tools.
• Problem-solving skills and the ability to work collaboratively in a multidisciplinary team environment.
• Excellent communication skills to effectively convey technical concepts and insights to both technical and non-technical stakeholders.

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring that corrective actions are in place and implemented for all non-conformances detected during audits
• Responsible for liaising with production side on the investigation of root cause of non-conformance and procedural failures
• Responsible for reviewing and approving required specifications and revisions in documentation prior releasing for production or customer
• Responsible for conducting process audit and internal quality scheduled/unscheduled audit
• Responsible for ensuring work is carried out in accordance with documented procedures

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in CNC/ Precision/ Machining Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

On behalf of the hiring company, we are looking for a suitable candidate to join them as a Testing Engineer :

Responsibilities

• Lead in-house Testers for lift testing and commissioning of the new installation projects at private commercial, public, and other projects and need assistance with lift modernization if required
• Manage and ensure that the lift adjustment, testing, and commissioning are safe during activities
• Manage on-site and monitor the testing process according to instructions and schedule
• Report Testing progress to the Department Head/ Manager
• Manage and ensure safe, high-quality, and timely testing of the equipment throughout the testing process
• Prepare lift adjustment training material and provide testing training for the in­house testers' skill improvement
• Provide supervision to testers and support technical to troubleshoot testing problems if it is necessary
• Responsible for all the arrangements with 3rd parties such as inspections, Client inspections related to lift testing
• Responsible for the annual calibration test of testing tools and equipment
• Responsible for the internal/ external audit inspection such as ISO 9001, ISO 14001 ISO 45001, and related systems, etc, and also updating the documents if required
• Assist in project management if required
• Perform any other duties as assigned by Department Head/ Manager

Requirement

• Diploma/Degree in Electrical Engineering
• Team lead/supervisory experience
• This role will be working at assigned construction sites
• Proficient in MS Office
• Able to communicate with internal stakeholders and clients
• Experience in Lift testing is highly advantageous

EA License : 22C0971 | EA Registration: R21101298