Job Descriptions

• Schedule maintenance activities for chillers systems, keeping track of maintenance works with follow up actions for chillers.
• Ensure all maintenance works are carried out according to prescribed checklist and schedule
• Responsible for testing & commissioning/ fine tuning of new chiller with minimal guidance, such as coordinate project execution at site, witness FAT and conduct SAT to ensure the chiller operating conditions according to target performance.
• Ability to interpret as-built documents, schematic drawings, technical documents as well as analyze operating data from chillers and know how to identify and repair any issues that arise.
• Responsible for on-site management of the chiller overhaul/ repair works and supervise subcontractor work; effectively control the service quality and progress.
• Preparation of service report for each service assignment.
• Assuage dissatisfied customers on service issues such as provide prompt and effective resolution to technical problems on chiller and recommend preventive measures.
• Preparation of risk assessments prior and ensure safety procedures and conduct during service and repairs.
• To ensure all works carried out safely and/or in accordance with safety procedures.
• Any other tasks, when required by Department Manager.

Job Requirements

• Minimum ITE Certificate with Merit in Engineering or Diploma in Mechanical Engineering.
• Minimum 3 years of relevant chiller experiences.
• Preferably Singaporean or SPR
• Able to guide and troubleshoot HVAC faults especially modular screw chillers, centrifugal chillers and absorption chillers.
• Good communication skills both verbal and written as well as preparing service reports.
• Has a good safety mindset and displays good WSH behavior.
• Short term working at overseas maybe required.

Benefits

• 10days AL
• AWS
• VB depending of the team and company performance
• Transport allowance

Working Hours

• 5 days (9am to 6pm)
• Monday to Friday
• ※ Most of the time they are outside of the office

Job Responsibilities

• Prepares Primavera P6, to monitor the progress and substantiate time and cost entitlements.
• Prepares preliminary master schedule for pre-tender, tender and contract programmes.
• Prepares and maintains an intergrated schedule of drawings, procurement, construction, test & trials, integrated logistic plan using Primavera P6.
• Prepares baseline schedule which includes resource loading using Primavera P6.
• Identify descrepancies, delay and provide recovery schedule to Project Manager.
• Assist with the preparation of Extension of Time (EOT) claims, including presentations to clients.
• Prepares progress reports and progress audits, inclusing S-Curves, progress trackers and programming health checks.
• Prepares receovery programmes and presentations summarising key recovery strategies.
• Prepares detailed commissioning programmes
• Prepares baseline schedule which includes resource loading and cost loading.
• Provides advise on post-contract claims, reviews, disputes and litigation on programming.
• Any other ad-hoc duties as assigned by superior.

Job Requirements
• Degree in Civil Engineering or equivalent
• Min. 2 -3 years experience in the same field or equivalent
• Must have Primavera P6 Certificate
• Good team player and ability to work in a fast-paced environment
• Hands-on experience with Primavera for (2 to 4 years experience)

Position Summary

Independently handling design project and develop naval architecture & hull design.

Provide assistance in enhancing the skills and knowledge of team members to support their professional development.

Tasks and Responsibilities

• Liaise with Owner/ Class/ External Designer for the specific design requirement and provide technical solution.
• Lead team to general conceptual and basic design.
• Design and deliver tailored training programs, provide one-on-one coaching, and ensuring alignment with organizational objectives and industry practices.
• Perform naval architecture calculations such as speed performance prediction, stability/hydrostatic, scantling assessment, weight distribution, launching calculation and etc.
• Responsible for delivering the respective project design drawing and document.

Job Requirements

• Bachelor’s degree in Marine Engineering, Naval Architecture, or a related field.
• Minimum 15 years of relevant work experience in the marine/offshore industry Hull & Hull / Naval Architecture design.
• Good knowledge and skill on coaching and structural/naval architecture design.
• Familiar with GHS/NAPA/FEMAP/Autocad/MS office
• Good communication, analytical skills
• Willingness to learn and adapt to new challenges.

Job Responsibilities:-

1. Primarily responsible for the development of wireless vibration temperature data acquiring solutions for industrial enterprises and rotating equipment ends, managing the entire process from pre-sales solution design to project delivery for major client projects. This includes PHM requirement analysis, technical solution design, and product development.
2. Responsible for the on-site delivery management of industrial IoT projects, including on-site engineering design, network setup, system upgrades, equipment IoT integration and debugging, performance testing, and configuration of SaaS software functions on the cloud.
3. Conduct vibration analysis for rotating equipment using Vibration Analyzer. Analyse vibration data to identify potential issues and recommend appropriate corrective actions.
4. Communicate effectively with suppliers and customers regarding technical solutions.
5. Responsible for training and knowledge transfer to customers to ensure they can effectively use the PHM platform. Additionally, tasked with identifying new functional requirements from customers and providing feedback to product development for adjustments, maintenance, and optimization of existing features.

Requirements:-

1. Possess minimum 3 years of experiences in vibration condition monitoring-related fields, with familiarity in IoT, big data, artificial intelligence, cloud computing, and other industrial internet domains.
2. Experience in implementing vibration condition monitoring projects for industrial enterprises and system integration, with a background in rotating equipment diagnosis & maintenance, and industrial IoT project implementation.
3. Understanding of the IT/software integration industry, basic knowledge of IoT, and the product architecture of platform+SaaS applications.
4. Preferably have a Bachelor’s degree or above in engineering, with strong business communication and pre-sales solution development skills. Must have a self-driven business approach, be outgoing, diligent, and possess a rigorous professional demeanor.
5. Possess valid SG class-3 driving license

Job Responsibilities

• Prepares Primavera P6, to monitor the progress and substantiate time and cost entitlements.
• Prepares preliminary master schedule for pre-tender, tender and contract programmes.
• Prepares and maintains an intergrated schedule of drawings, procurement, construction, test & trials, integrated logistic plan using Primavera P6.
• Prepares baseline schedule which includes resource loading using Primavera P6.
• Identify descrepancies, delay and provide recovery schedule to Project Manager.
• Assist with the preparation of Extension of Time (EOT) claims, including presentations to clients.
• Prepares progress reports and progress audits, inclusing S-Curves, progress trackers and programming health checks.
• Prepares receovery programmes and presentations summarising key recovery strategies.
• Prepares detailed commissioning programmes
• Prepares baseline schedule which includes resource loading and cost loading.
• Provides advise on post-contract claims, reviews, disputes and litigation on programming.
• Any other ad-hoc duties as assigned by superior.

Job Requirements
• Degree in Civil Engineering or equivalent
• Min. 2 -3 years experience in the same field or equivalent
• Must have Primavera P6 Certificate
• Good team player and ability to work in a fast-paced environment
• Hands-on experience with Primavera for (2 to 4 years experience)

Business Understanding

At least (3) years of relevant experience in:

• Business Requirement Analysis
• Business Process and System Understanding
• Effective Communication with both business and technical users

Azure Data Engineering

At least (2) years of hands-on experience as Azure Data Engineer using:

• Azure Data Factory
• Azure Synapse Analytics / Datawarehouse

Preferably with relevant certifications from Microsoft including Azure Data Engineer Associate;

Data Ingestion & Modelling

At least (3) years of hands-on experience in

• Performing data Ingestion using Data factory & T-SQL stored procedure and data harmonizing
• Implementing Data Quality validation
• Good to have following skills
• Knowledge of Azure Databricks
• Data modelling in Azure Analysis Services using star and snowflake schema.
• Knowledge of writing DAX query to create measures & dimensions.
• Python Coding Experience

Others

Conversant in Microsoft Office products

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Advanced Networks & Sensors

Our Advanced Networks & Sensors business specializes in platform digitalization, advanced connectivity, and cutting-edge manufacturing. This diversity of capabilities presents a range of roles through which you can contribute to the development of innovative, secure, and patented products. Join our team and play a crucial role in developing tomorrow’s technology and connectivity solutions and services to sectors spanning defence, public security, government, and the commercial realm. Your work will have a global impact as we empower customers through advanced communications, intelligent sensors, and the deployment of AI-enabled Edge applications for mission-critical roles.

Together, We Can Make A Significant Impact

We are looking for a proactive Electronics Assistant Engineer with a diploma in Electronics or a related field to support our engineering team. This role involves assisting in the development, testing, and maintenance of electronic systems and components. The ideal candidate will have a solid understanding of electronics principles and a desire to learn and grow in a dynamic environment.

Be Part of Our Success

• Assist in the assembly, testing, and troubleshooting of electronic circuits and systems
• Support the design process by preparing prototypes and conducting tests
• Collaborate with senior engineers to gather requirements and assist in project development
• Document testing procedures, results, and modifications made during projects
• Proficient in technical documentation and reporting
• Help in the selection of electronic components and materials for projects
• Participate in maintaining laboratory equipment and ensuring safety standards are met
• Stay informed about new technologies and trends in electronics

Qualities We Value

• Diploma in Electronics Engineering, Electrical Engineering, or a related field
• Experience through internships or projects related to electronics is an advantage
• Basic understanding of circuit design and electronic components
• Familiarity with testing equipment such as oscilloscopes, multimeters, and function generators
• Understanding of programming basics (e.g., C, C++) for embedded systems
• Basic knowledge of CAD software for electronic design (e.g., Altium) is a plus
• Strong problem-solving skills and attention to detail
• Good communication skills and ability to work well in a team
• Willingness to learn and take on new challenges
• Singaporeans Only

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

Working location is in Ang Mo Kio

Your Job

As a Plating Engineer, your primary purpose is to develop and optimize plating process engineering that aligns with customer requirements. You will work on implementing low-cost, high-efficiency plating production technology. This role involves strategizing plating processes for new projects, ensuring the feasibility of product designs, analyzing and mitigating risks, and collaborating with various teams to enhance plating quality.

Our Team

You will be reporting to the Plating Expert. You will be part of the Division of DSS, specifically within the Manufacturing Engineering Development department and the Plating ME section. You'll work closely with a diverse group of professionals, including Product Managers, Product Designers, AQP, Project Management Engineers, Tooling Designers etc.

What You Will Do

• Develop and optimize the plating process engineering to meet customer requirements, focusing on cost-effectiveness and efficiency.
• Collaborate with project teams to strategize plating processes for new developments and design plating processes.
• Ensure the plating manufacturing feasibility of product designs and address any potential risks.
• Work with design, manufacturing, and other process teams to innovate and improve processes.
• Involve yourself in designing new tooling for existing and new products and assist in resolving production and quality issues.
• Engage in New Product Introduction and plating manufacturing engineering, and solve plating quality issues.
• Participate in Equipment 3D Design projects to enhance plating capabilities.

Who You Are (Basic Qualifications)

• Develop and optimize the plating process engineering to meet customer requirements, focusing on cost-effectiveness and efficiency.
• Collaborate with project teams to strategize plating processes for new developments and design plating processes.
• Ensure the plating manufacturing feasibility of product designs and address any potential risks.
• Work with design, manufacturing, and other process teams to innovate and improve processes.
• Involve yourself in designing new tooling for existing and new products and assist in resolving production and quality issues.
• Engage in New Product Introduction and plating manufacturing engineering, and solve plating quality issues.
• Participate in Equipment 3D Design projects to enhance plating capabilities.

What Will Put You Ahead

• A Bachelor’s Degree in Electrochemistry, Electrochemical Engineering, Materials Science/Engineering, or an equivalent technical discipline is preferred.
• Experience in the plating manufacturing processes of connectors and familiarity with connector applications and performance.
• Expertise in designing plating equipment and a minimum of three years of experience at an electrical connector manufacturer or with a plating chemistry/process supplier.
• Proficiency with design tools such as NX and CAD (2D/3D) and a strong foundation in plating technical expertise.
• A good team player with qualities such as humility, respect, and a positive attitude.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Job Responsibilities: -

1. Supervise motor inspection and overhaul service work to ensure efficient and effective maintenance work, compliance with safety regulations and quality standards.

2. Conducting motor assembly, testing, and problem solving. Determine the motor status based on test results and issue motor test reports.

3. Improve work method, quality management systems, and workflow to enhance maintenance processes.

4. Provide technical support for motor pre/post-sales activities, including technical knowledge training for customers, ensuring customer satisfaction.

5. Develop and implement motor inspection, maintenance, and diagnostic plans for products, providing field technical guidance and process supervision.

6. Perform motor fault diagnosis, including vibration analysis, temperature monitoring, electrical testing, and insulation checks, etc.

7. Analyze and resolve motor-related problems to ensure optimal performance and reliability.

8. Train and upgrade the skills of workers in motor maintenance processes, including testing, assembly, insulation, repair, etc.

Requirements:-

1. Degree in Electrical Engineering or related field (preferred). Hands-on experiences in motor overhaul maintenance and technical support.
2. Possess years of experiences in motor repair and testing, diagnostics and troubleshooting.
3. Familiar with the maintenance, overhaul and testing of various high-voltage and low-voltage motors.
4. Preferably with class-3 driving license.

Job Descriptions

• Thoroughly review and understand bidding employer’s requirement documents, project specifications, and process data.
• Translate employer requirements into effective contractor solutions that align with project goals.
• Propose T&I proposal and support project execution.
• Assign work to In-House design team. Timely provide technical proposal or solution to project operation team.
• Liaise and communicate with project stakeholder for technical clarification and conclusion.
• Technical support for SFE Vessel operation and maintenance.
• Support engineering budget (estimation) and cost control.

Requirements

• Bachelor Degree in Civil Engineering / Naval Architect
• Min 10 years of related working experiences in offshore structure design and installation such as offshore platform, jacket and foundation.
• Preferably have experience with Wind Farm T&I.
• Familiar with offshore industrial standards and codes.
• Familiar with engineering design tools and software.
• Able to work in a team.

Job Description

• Oversee in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc.
• Manage ACMV design coordination with other trades with BIM coordination.
• Liaise with ACMV suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for ACMV equipment and materials to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required.
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based ACMV experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in ACMV calculations including heat load, pump sizing, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more.
• Experience of design and coordination skill.
• Familiar to ACMV, Green Mark and fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage.

Job Description

Your main responsibilities will be:

• To carry out different machining operations on CNC & Conventional machines according to drawings, procedures and specifications
• To be involved in continuous improvement and optimise work processes

Job Requirements

What do you need from me?

• Previous experience on CNC and Conventional machines with an understanding of machining principles
• Ability to read production drawings
• Understand and Primarily Operate CNC Control systems
• Mill turning techniques
• Set and Run various CNC Machines & conventional machines.

JOB DESCRIPTION

· Wireless AP software development and firmware development

· Network communication protocol development

· Embedded system development

· Execution of pre-test for IoT/ Wi-Fi router related certification

JOB REQUIREMENTS

· Bachelor’s Degree or above in Computer Science, Computer Engineering, Electronic, Telecommunication or Networking Engineering

· Familiar with C/C++ and Linux system

· Familiar with networking and embedded system development

· WiFi development experience is an advantage

· Good communication and team working skills

· Good problem solver, ability to think out of the box

· Passion in programming is an advantage

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

As a Project Engineer specializing in structural steel construction, you will play a pivotal role in the planning, execution, and completion of our projects. Working closely with our project managers, you will oversee all aspects of construction, ensuring adherence to timelines, budgets, and quality standards. This is an excellent opportunity for a talented individual to make a significant impact in the dynamic field of construction engineering.

Key Responsibilities:

• Collaborate with project managers to develop project plans, schedules, and budgets for structural steel construction projects.
• Conduct thorough site assessments and surveys to identify potential challenges and ensure compliance with regulatory requirements.
• Coordinate with architects, engineers, subcontractors, and suppliers to facilitate the timely procurement of materials and resources.
• Manage day-to-day construction activities, including site logistics, safety protocols, and quality control measures.
• Monitor project progress and performance, identifying and addressing deviations from plans and specifications.
• Provide technical expertise and problem-solving support to resolve construction-related issues effectively.
• Prepare and review engineering drawings, specifications, and documentation to ensure accuracy and completeness.
• Foster a culture of teamwork, innovation, and continuous improvement among project team members.

Qualifications:

• Bachelor's degree in Civil Engineering, Structural Engineering, or a related field.
• Minimum of 2 years of experience in project engineering, preferably in the structural steel construction industry.
• Proficiency in Tekla software.
• Strong understanding of construction principles, practices, and techniques.
• Excellent communication, leadership, and interpersonal skills.
• Ability to manage multiple priorities in a fast-paced environment.
• Familiarity with Singapore building codes, regulations, and industry standards.
• Immediate availability will be preferred

Roles & Responsibilities (Quantity Surveyor):

Understand, Review, and be well-versed in preparing contract documents and drawings.

Source sub-contractors, and vendors for quotation during tendering

Evaluate quotation and costing summary for approval before tender submission

Analyse tender outcomes and prepare detailed reports for review

Scrutinizing maintenance and material costs, as well as contracts to ensure the best deals.

Liaising with site managers, clients, contractors, and subcontractors.

Prepare reports, analyses, contracts, budgets, risk assessments, and other documents.

Advising managers and clients on improvements and new strategies.

Keeping track of materials and ordering more when required.

Documenting any changes in design and updating budgets.

Establishing and maintaining professional relationships with external and internal stakeholders.

Visiting various sites, as and when required. Measure data on-site in order to ensure the accuracy of the claim.

Provide measurement, cost evaluation and quotation support for engineering projects.

Preparing Monthly progress claims and certifications to Subcontractor claims in a timely manner.

Prepare monthly report, update and maintain records for all contractual relevant scopes

Undertake costs analysis for all project trade works Prepare and disseminate information to appropriate employees regarding contract status, and facilitate contractor meetings.

Ensure the contractor is in compliance with legal requirements, owner specifications, and government regulations.

Provide contract summaries and ensure contract execution in accordance with company policy.

Prepare payment claims, payment certificates, and check invoices against delivery order

Track payments and deadlines.

Roles & Responsibilities (Project Engineer):

Prepare, schedule, coordinate, and monitor the assigned scope of works

Coordinate with the internal team, clients / main contractor, architect, consultants, suppliers, and subcontractors

Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications

Analyse overall quality control of the work (budget, schedule, plans, performance) and report regularly

Assign responsibilities, mentor, lead project team, and attend meetings

Review engineering deliverables and initiate appropriate corrective actions

Responsible for submission of technical drawings, and work schedules to clients for approval;

Taking responsibility for structural analysis, calculation, preparation of design sketches and drawings

Review shop drawings and built drawings;

Responsible for overall aspects of the management of subcontractors;

Plan, work, schedule, and delivery of equipment and materials to the site;

Responsible for monthly progress claims and project costing;

Ensure all required permits and clearances are obtained from respective govt agencies and client

Work closely with Consultants, Regulatory Authorities, and Contractors, to provide planning, design, and supervision to solve site matters and timely completion of the projects;

Take part in the project plan and give inputs regarding implementation;

Manage Internal team, and Sub-contractors, on-site to ensure all works comply with regulatory/requirements;

Update the progress of construction work to Project / Site Manager

Keep in touch with designers, architects, consultants, and suppliers to ensure workflow is on schedule;

Ensure implementation and sustaining of construction quality and safety programme;

JOB REQUIREMENTS:

Preferably Degree in Quantity Surveying or Engineering (Civil / Mechanical / Structural / Construction)

Skills in MS Office, Auto Cad, Microsoft Project

Work experience: minimum 8 years of experience in the relevant field

Good communication skills in English, must have to liaise effectively with other professionals

Possess excellent negotiation, and coordination skills and able to work in fast-paced environment

Kindly submit your CV along with the following details;

Current / Last Drawn Salary (in SGD)

Expected Salary (in SGD)

Availability

Residency Status in Singapore

We regret that only shortlisted candidates will be notified.

Job Responsibilities:

1. Assisting and supporting technical sales team in terms of scope of supplies and costing with respect to electrical, automation requirements during the prospecting stage for water/wastewater related systems and projects.
2. Liaising and communicating with agents/distributors/OEM partners/end-user customers on technical details and specifications of parts and components where EICA works are concerned.
3. Design and producing electrical, control panel drawings (AutoCAD or Eplan), BOM list generation and hardware component selection.
4. Developing PLC programming & HMI project (Siemens /Allen Bradley etc) for all process and functional controls of water/wastewater related systems and instrument.
5. Liaising, negotiating, and managing sub-suppliers/sub-contractors in Singapore and in the region with respect to procurements of all wiring and cabling works, fabrication and assembly of control panels for systems as well as for in-situ installation of water/wastewater related systems or projects.
6. Determining and monitoring procurement and production progress and schedules where cabling and wiring works, control panels’ PLC works and supplies are concerned.
7. On site electrical installation supervision, electrical panel testing, instrumentation configuration, loop test and automation commissioning works.
8. Compiling and handing over operation and maintenance (O&M) manuals (electrical and PLC portions etc) to our agents/distributors and end-user customers.

Requirements:

• Diploma / Degree in Electrical Engineering or Computer Science.
• Good Interpersonal relationship and communication skills with proficiency in spoken and written English.
• Minimum 5 to 8 years of working experience in Water Industry or engineering projects would be advantageous.
• Knowledge of PLC programming (Siemens /Allen Bradley etc)
• Willingness to travel locally or to regional countries occasionally for site installation, trouble-shooting or testing and commissioning duties at clients' project sites
• Able to work independently and a good team player.
• Senior position will be considered for candidates with more experience.
• Candidate who are able to start work within short notice or immediately would be advantageous.

Are you interested in joining a team that is revolutionizing the resource exploration and navigation industry? Atomionics is developing quantum sensors using cold atom interferometry, where atoms are cooled to nearly absolute zero using lasers. At such extreme temperatures, these atoms behave like waves, enabling precise measurement of forces acting on them.

This technology has vast potential applications, including advancing the zero-carbon energy transition, enhancing the performance of inertial navigation systems, and revolutionizing the global positioning system. At Atomionics, you will have the opportunity to design, prototype, test, refine and manufacture Quantum Gravity Sensors. You will develop solutions to improve the performance of our sensor, while also making it compact and robust for field deployment on projects around the world.

Atomionics is backed by some outstanding investors across private and public sectors, such as Wavemaker, SGInnovate, Cap Vista, 500 Startups, and other notable angels.

Responsibilities

• Design and fabrication of jigs, mounts, and fixtures for optics, electronics, and vacuum assembly.
• Create CAD models and engineering drawings, and select appropriate manufacturing processes forprecision manufacturing and fabrication of optomechanical components.
• Structural, vibrational, and heat transfer analysis (FEA) to ensure robustness in harsh environment
• Design temperature and vibration control systems for different subsystems.
• Liaise with our international supply chain partners located in China, France, Germany, India, Italy,USA, etc. and work within a multicultural team.

About you

• An absolutely driven individual with creative problem-solving skills, analytical mind, and persistence, ideally, demonstrated
• Highly skilled with CAD software: Autodesk Inventor / Solidworks etc
• Deeply knowledgeable in manufacturing techniques, surface finishing and assembly
• Skilled in GD&T for engineering drawings including tolerance stacks
• Skilled with hands-on fabrication including machining lathe, CNC, laser cutter, 3D printers

Even better if you have

• Experience in thermal design, including heat sinks, heat pipes, liquid heat exchangers, peltiers and FEA for thermal simulations
• Experience in designing simple PCBs & cable harnesses
• Been through a full product development cycle for a device with a complex system architecture
• Worked on personal hobby projects (and can brag about them!)

What we can offer you

• A chance to learn about the intricacies of deep-tech research, product development, and strategy in a high-growth startup while working with some of the best engineers and physicists
• Work on the cutting edge of quantum technology
• Develop robust applications for translational research
• Board games and curry night

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

• Support engineers in conducting site acceptance tests, commissioning, and start-up for transformers and switchgear. Knowledge of UPS, Low Voltage/Medium Voltage Variable Speed Drives, and PLC systems is a plus.
• Perform preventive maintenance, breakdown repairs, fault investigation, and troubleshooting of electrical equipment.
• Provide field operations and technical support to customers, helping them identify their needs and offering post-sales service solutions.
• Address on-site repair and maintenance issues, troubleshoot, and effectively resolve technical problems.
• Deliver field feedback to engineering and manufacturing teams to assist in new product development and improvements to existing products.
• Manage the procurement of spare parts from Supplier

Job Requirements:

• Diploma/ITE in Electrical Engineering or a related field.
• Relevant experience in technical servicing roles.
• Hands-on experience in customer service with the ability to work independently on-site.
• 1 to 2 years of field service experience in a related industry.
• Strong communication & analytical skills.
• Must be ready to travel on business trips

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Apply Now” or aliceyap(a)hkmsvs.com

All applications will be treated in the strictest confidence and only shortlisted candidates will be notified

Yap Lay Choo

EA Licence No. 03C5391 | Registration No. R1987101

JOB DESCRIPTION: Candidate will be involved in industry projects and use 3D printing technology and other post processes to build parts using polymer reinforced fiber composite materials.

RESPONSIBILITIES:

-Operate equipment to perform 3D printing and relevant post-processes (e.g. cam-based systems), mechanical charaterisation such as tensile, bending, compression tests and inspection (e.g., CMM) as part of the industry project.

-Responsible for generating jig and fixturing 2D/3D drawings for documentation and archiving purposes.

-Manage and work with local machining house for jig and fixture fabrication and assembly.

-Carry out routine maintenance, diagnostics checks and engage equipment vendors for preventive maintenance.

-Perform function testing to verify equipment readiness after maintenance or material change.

-Plan equipment schedule, maintain and improve lab environment. Manage raw feedstock and maintain stock/inventory list.

-Responsible for ensuring duties are performed in a safe, efficient, and effective manner.

JOB REQUIREMENTS:

-NITEC or Diploma in engineering related qualifications.

-At least 5-year work experience in manufacturing roles within the aerospace / MRO / oil and gas / manufacturing industry. Candidates with > 5-year experience will be considered for a senior role.

-Capabilities in CAD and 2D drawings using NX/SolidWorks, with knowledge in GD&T will be beneficial.

-Traditional methods of inspections such as CMM/handheld measurement tools and preparation of FAI documents is preferred.

-Familiarity in handling CAM based systems such as robotic system/CNC is an added advantage.

-Methods of processing and post processing of plastic parts such as prototyping of plastic parts and knowledge in fixture design for machining is preferred.

-A team player who is motivated to solve technical challenges and deliver on time to customers.

-Willingness to learn and adapt to new technology promptly.

-Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

JOB DESCRIPTION: Candidate will be involved in industry projects and use 3D printing technology and other post processes to build parts using polymer reinforced fiber composite materials.

RESPONSIBILITIES:

-Operate equipment to perform 3D printing and relevant post-processes (e.g. cam-based systems), mechanical charaterisation such as tensile, bending, compression tests and inspection (e.g., CMM) as part of the industry project.

-Responsible for generating jig and fixturing 2D/3D drawings for documentation and archiving purposes.

-Manage and work with local machining house for jig and fixture fabrication and assembly.

-Carry out routine maintenance, diagnostics checks and engage equipment vendors for preventive maintenance.

-Perform function testing to verify equipment readiness after maintenance or material change.

-Plan equipment schedule, maintain and improve lab environment. Manage raw feedstock and maintain stock/inventory list.

-Responsible for ensuring duties are performed in a safe, efficient, and effective manner.

JOB REQUIREMENTS:

-NITEC or Diploma in engineering related qualifications.

-At least 8-year work experience in manufacturing roles within the aerospace / MRO / oil and gas / manufacturing industry. Candidates with > 5-year experience will be considered for a senior role.

-Capabilities in CAD and 2D drawings using NX/SolidWorks, with knowledge in GD&T will be beneficial.

-Traditional methods of inspections such as CMM/handheld measurement tools and preparation of FAI documents is preferred.

-Familiarity in handling CAM based systems such as robotic system/CNC is an added advantage.

-Methods of processing and post processing of plastic parts such as prototyping of plastic parts and knowledge in fixture design for machining is preferred.

-A team player who is motivated to solve technical challenges and deliver on time to customers.

-Willingness to learn and adapt to new technology promptly.

-Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.