Responsibilities

• To carry out various pest maintenance and rodents eradication works at Animal holding facilities, exhibits, habitats, aviaries and its surrounding areas
• To carry out potentially strenuous jobs, able to work diligently with minimal supervision, meticulous
• To Understand conditioning method and positive-reinforcement training.

Requirements

• Vector Control Operator, Vector Control Technician (VCT) and Vector Control Worker (VCW) licensed/certified.
• 2 years working experience in pest control, physically fit and healthy to work outdoors and carry out potentially strenuous jobs, able to work diligently with minimal supervision
• Creativity for the design of mechanical traps.
• Enthusiasm and willingness to free aviaries of rats.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Scope

• Responsible to review and approve master batch records and subsequent batch records
• Review and approve cleaning records and procedures and ensure compliance with set
• Review and approve GMP documentation Ensure adherence to quality procedures, regulatory requirements and cGMPs.
• Review and approve deviations according to the site procedures
• Handle product complaints.
• Ensure complaints are investigated thoroughly with CAPAs effective to prevent recurrence.
• Coordinate with cross-functional team to prepare Annual Product Reviews, discuss trends and atypical observations and recommend improvement actions.
• Conduct internal and external audits
• Maintain inspection readiness and support inspections from regulatory agencies and customers.
• Actively participate in GMP walk downs to ensure site operation and facility maintained in inspection ready state.
• Support the maintenance of validated stated of GMP systems and processes.
• Facilitate and prepare regulatory submissions and attend to regulatory queries in a timely manner

Requirements

• Min Degree in Science / Chemical Engineering or equivalent with relevant pharmaceutical experience.
• Minimum 3 relevant years of experience in QA/QC and GMP Compliance
• Familiar with manufacturing operations applications; six sigma and lean principles and process improvement tools.
• Thorough knowledge of GMP compliance regulations, ICH Q7a Guidelines, Good Documentation Practices and other applicable regulations.
• Proven track record of continuous improvement in quality operations or manufacturing.

All qualified applicants, please send in your resume to: [email protected]

Alex Goh Hock Leong (R1763413)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Overview:

As guardians of the Micron brand, we are seeking a visionary Senior Manager to lead a team of highly skilled technical leaders and drive best in class excellence in manufacturability and quality management systems through global standards and business rules and systems. A strong understanding of chip package interactions is highly desirable to address the complexities of modern manufacturing requirements and drive worldclass quality. A strong process and systems thinking is required to drive the team towards systems improvements. A visionary approach on AI technology is needed to challenge the team to revolutionize quality requirements applications in the field.

The ideal candidate should possess robust background in memory chip and package development, testing, and high-volume manufacturing (HVM). Proficiency in industry standards such as IATF and Automotive Core tools is essential to align fundamental industry requirements with Micron's objectives.

This individual will be instrumental in driving Micron towards not only meeting customer and industry expectations but also grow the team into technical leaders in each field and uplift Micron brand by crafting and executing strategies that consistently delivers best in class quality in the industry.

Key Responsibilities:

Leadership & team performance and development:

• Lead and mentor a team of technical leaders to define and drive global QMS standards, including FMEA, Control Plan, SPC, SBL, PAT, MSA, Calibration, Lab, NUDD, gSPECs, and SafeLaunch.
• Develop team members into technical and industry leaders.
• Review standards and business rules to balance functionality, performance, and manufacturing constraints.
• Establish KPIs to monitor and enhance team performance, compliance, efficiency, and effectiveness.

Develop, execute, and refine strategies:

• Deliver best in class quality by aligning product design, development, testing, and manufacturing with standards and business rules.
• Establish an AI roadmap for quality standards and system applications.
• Identify and close gaps in Micron's QMS for end-to-end standards connectivity.
• Future-proof Micron by identifying new opportunities and quality requirements ahead of industry and customer needs.

Lead and drive cross functional team for continuous improvement:

• Conduct root cause analysis and post mortem to identify corrective actions to mitigate risks and enhance quality performance.
• Establish new standards and business rules for business continuity and risk mitigation if required.
• Identify and drive innovative solutions for manufacturing challenges, focusing on process optimization and cost reduction.
• Partner with stakeholders across design, development, test, manufacturing, package reliability, quality assurance team, and supply chain teams to ensure seamless integration of standards requirements into product lifecycles.

Personal traits (this position demands):

• Long-term vision and direction setting, with the ability to drive team execution
• High mental flexibility, critical and logical thinking
• Willingness to challenge conventional rules
• Strong coaching and mentoring skills to develop the team into industry experts
• Ability to drive cross-functional alignment and influence stakeholders at all levels
• Clear and concise articulation when interacting with stakeholders, customers, and auditors, including effective use of visual aids

Qualifications:

• Bachelor's degree in Engineering, Manufacturing, or a related field
• Over 10 years of experience in engineering, quality management, or related roles, including leading technical teams
• Strong understanding of IATF, ISO 9001, APQP, and Automotive Core tools
• Strong knowledge of Micron's processes (design, test, development, manufacturing)
• Knowledge of chip package interaction and its impact on manufacturing and design processes
• Familiarity with processes such as FMEA, Control Plan, SPC, SBL, PAT, MSA, Calibration, Lab, NUDD, gSPEC, and SafeLaunch

Travel and schedule expectations:

• Travel: Yes (<20%)
• Night and early meetings: Expected (2-3 times a week). Team practice flexible time management to maintain work-life balance

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

* Cleaning service

* Location: Changi Airport

* 5.5days

* 8:30am - 5:30pm

Job Description:

• Collaborate with the Resident Manager & Assistant Managers to establish standard operating procedures for ground operations.
• Inspect daily tasks performed by ground staff.
• Employ a coaching approach to reinforce SOPs with ground staff: supervisors and housekeeping staff.
• Mentor new staff during orientation.
• Implement skills enhancement programs for ground staff to boost performance.
• Update training schedules for cases of non-conformance and monitor improvements to bridge skills gaps.
• Coordinate and conduct training sessions on safety, quality, and environmental subjects.
• Undertake any other assigned ad-hoc tasks by the Manager.

Job Requirement:

• Possess a minimum Diploma/Degree in a relevant field of study and be open to training.
• Proficient in Microsoft Office applications (Excel, Word, etc.).
• Capable of working independently and thriving under pressure.
• A team player who can handle multiple tasks in a fast-paced setting.
• Willing to work shifts and overtime occasionally.
• Good communications skills are preferred.

HOW TO APPLY:

Interested applicants, please click on “Apply Now”or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

Responsibilities

Prepare project management plan and its sub-plans, such as: work scope statement, schedule plan, manpower plan, tools and equipment plan, procurement plan and OHSE plan

• Provide engineering support in project or plant maintenance • Coordinate internal and external audit review

• Engineering calculations associated with current carrying capacity of cables, wires, fuses and other circuit protective devices.

• Procedures for inspection, testing and certification of electrical fixed installations.

• Industrial hazards, safety and health precautions, and environmental concerns.

• Installation practice and regulations, and relevant codes of practice.

Requirements & Professional Skills•

Min. Diploma in Electrical Engineering or equivalent

Min. 0-1 year of relevant experience in electrical work

Job Description

• Industry/ Organization Type: Marine Technology Service Provider
• Position Title: Administrative Assistant (Inventory control)
• Working Location: West – Tuas (Nearest MRT: Tuas Link) – Requires taking a few bus stops to reach the company
• Working Hours: 5 days (Mon-Fri: 8.30 am-5.30 pm)
• Salary Package: Up to SGD2800 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Maintain accurate records of inventory levels and ensure the database is up-to-date.
• Regularly review stock levels and usage trends to prevent overstocking or shortages.
• Coordinate with the procurement team to order necessary items before stock runs low.
• Prepare and manage detailed reports on inventory operations, adjustments, and issues for internal use.
• Document and update inventory procedures and policies to enhance workflow efficiency.
• Assist in processing incoming and outgoing orders, ensuring that all transactions are recorded promptly and accurately.
• Schedule and coordinate the delivery of goods, liaising with suppliers and logistics partners.
• Conduct regular checks to ensure the quality and condition of inventory items.
• Report any discrepancies or issues with delivered goods to the relevant parties immediately.
• Work closely with other departments, particularly the finance and operations teams, to align inventory needs with budgetary constraints and operational requirements.
• Provide administrative support during inventory audits and end-of-year stock takes.
• Identify opportunities for improving inventory processes and contribute to the implementation of new systems or technologies that enhance inventory management.

APPLY NOW!!!

• Min. N level
• Min. 1 year of working experience in the related field
• Training is provided to an inexperienced candidate
• Familiar with Microsoft Office

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69068 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

SPECIFIC RESPONSIBILITIES:

• ensures all drawings, bills of materials, purchase requisitions and quality checks are completed as per project schedule and ISO 9001 & 14001 processes.
• conducts design reviews to analyze specifications, sketches, drawings, ideas, and related data to assess factors affecting component designs and the procedures and instructions to be followed.
• confers with customer representatives to review specifications and answer questions pertaining to installation of systems.
• supports during manufacturing, assembly, de-bug, and customer buy-off.
• writes technical reports, manuals and technical support documentation
• performs a wide variety of additional functions to meet project schedules and product deliveries
• reads, understands, and acts upon mechanical drawings including piece part and assembly drawings, work instructions, and procedures
• determines manufacturing methods, techniques, and procedures as required to perform tasks as required for to ensure designs perform as required
• designs test fixtures and setups as needs arise
• communicates with vendors to support procurement and to address issues
• Responsible for any other role as assigned by the Project Manager

QUALIFICATIONS & EXPERIENCE:

• Diploma or Degree in Mechanical / Manufacturing Engineering or an equivalent degree in related technical field desired
• 3 to 5 years relevant experience in mechanical engineering and material handling systems across various industries.
• AutoCAD and solid works proficiency
• Knowledge of design techniques, tools, and principle involved in production of precision technical drawings, and models
• Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to design and production
• Knowledge of design principles, steel and aluminum part creation, sub assembly and pneumatics.
• Ability to work independently in designing and liaising with customers on technical specifications and requirements
• Participate in and effectively communicate in group discussions and meetings
• Ability to work well in a team environment
• MS Office proficiency

Role Overview

We are seeking a talented and motivated Mechanical Engineer to join our team. The successful candidate will play a crucial role in the design, development, coordination and supervision of ACMV system. This position involves technical activities, independent thinking and problem-solving skills to contribute to the success of our projects. As a key member of our engineering team, the Mechanical Engineer will have exposure to local statutory requirements, industry standards/norm, project management, equipment selection and costings.

Responsibilities

• Involved in design development, drawings and material submissions for approval, QA/ QC works such as inspection,testing & commissioning, handing over of installation.
• Attend meetings and preparation of reports for site progress and schedules. Coordinate site safety management system.
• Liaise and coordinate ACMV installations with main contractor, suppliers and sub-contractors.
• Supervision and monitor daily site work done, and plan for catchup as required.

Qualifications & Skills

• Degree in Mechanical Engineering or equivalent.
• Minimum 2 years’ relevant working experience in construction.
• Experience in ACMV, chilled water system installation and design. Able to perform basis engineering calculation with MS Excel.
• Good communication, independent and can liaise with main contractor and sub-contractors effectively.
• Good understanding of engineering principles and drawings.

Responsibilities:

1. Mandatory Reporting & Compliance (ECA, WEMP, GHG, etc.)

• Prepare and submit Energy Management System (EnMS) reports.
• Ensure compliance with Minimum Energy Efficiency Standards (MEES) for water-cooled chilled water systems.
• Update and submit the Energy Efficiency Improvement Plan (EEIP) and Energy Reports as per regulatory requirements.
• Conduct annual energy reviews and support ISO50001 certification processes.
• Monitor and report water usage including recycling and reuse systems.
• Analyze GHG emissions data monthly and prepare yearly submissions for third-party verification.
• Report on Corporate Environmental Performance Management (CEPM) and align with Net Zero and Renewable Energy targets.

2. Corporate Environmental & Sustainability Initiatives:

• Track and report environmental indicators such as power, water, and waste consumption.
• Develop gap analyses and enhancement plans to improve eco-efficiency and recycling rates.
• Support corporate audits and sustainability projects, and environmental goal tracking.

3. Facility Monitoring & Data Management:

• Integrate facility monitoring systems into the Maintenance Management System (IFMS Dashboard).
• Develop automated preventive maintenance schedules and inventory tracking.
• Oversee daily monitoring logs and production support using SharePoint for data analysis and reporting.

Requirements:

• Degree in Environmental Science, Sustainability, Engineering, or a related Engineering field.
• Proven experience in Energy Management, Environmental Sustainability, and Corporate Responsibility reporting.
• Strong technical skills in data analysis, with proficiency in tools such as BMS, SharePoint, and digital metering systems.
• Excellent communication and reporting skills with attention to detail.
• Experience in maintenance management systems and facility monitoring tools.
• Knowledge of regulatory frameworks such as NEA and PUB compliance standards.
• Familiarity with ISO50001, GHG Protocol, and other sustainability frameworks will be an advantage.

Location: Central area

Position Overview:
This role is ideal for individuals who are passionate about designing and implementing technology solutions while providing technical support for smooth operations. As an Infrastructure Engineer, you will contribute to infrastructure planning, project execution, and end-user support to ensure seamless technology integration and customer satisfaction.

Key Responsibilities:

• Assist senior engineers in planning and designing technology schematics and infrastructure solutions.
• Develop detailed bills of materials and provide proactive recommendations for technology enhancements.
• Take full accountability for assigned projects, overseeing the installation, field deployment, and implementation phases through to completion.
• Maintain up-to-date project schedules and cost sheets, ensuring timely reporting of progress to senior staff.
• Provide technical and desktop support for end-users, ensuring system reliability and resolving issues effectively.
• Collaborate with customers to understand requirements and communicate solutions, fostering positive relationships.

Preferred Skills and Qualifications:

• Strong knowledge of Windows operating systems, endpoint security, and basic networking configuration.
• Familiarity with helpdesk systems and processes.
• Excellent communication skills to manage end-user interactions and articulate technical solutions.
• Capable of planning delivery timelines and coordinating with stakeholders effectively.
• Detail-oriented, with the ability to manage multiple tasks and meet deadlines.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

General Overview

This position is part of the site Mechanical team that provides technical/maintenance support to the Operation and Project teams in LNG Terminal. He/she would be mainly responsible for overseeing the safe and reliable operations and maintenance of the Terminal assets from the Mechanical discipline perspective.

The incumbent is also responsible for establishing, reviewing and overseeing the relevant mechanical design elements of new build equipment / asset enhancement activities and implementation of minor mechanical engineering projects, while ensuring the overall mechanical integrity of the terminal.

Roles and ResponsibilIties

The incumbent shall be responsible for, but not limited to, the following scope of tasks and duties:

• Provide technical/maintenance support and solutions to the terminal operation Teams including supporting the development of maintenance strategy focusing on equipment reliability, compliance, spares inventory requirement, preventive and predictive maintenance programmes and mechanical maintenance procedures for mechanical equipment.
• Lead the maintenance, troubleshooting, repair, commissioning and replacement of mechanical static equipment and piping systems.
• Manages the in-house contractor and equipment vendor to execute mechanical work/improvements within the terminal to ensure safe work execution and gas supply reliability
• Responsible to ensure compliance to applicable regulations/industry best practices, safe to operate, fit for purpose, maintainable and reliable for the site’s modified or newly build mechanical systems (such as marine loading arm, pumps, pressure vessel, safety device , etc).
• Manage and ensure list of statutory equipment (lifting machine, lifting gears, pressure vessel, safety valves, etc) are timely serviced and inspected in accordance to statutory codes and compliance standards
• Perform root cause analysis on equipment failure and provide recommendations to resolve technical issues which may also arise from vibration, RT, UT, oil and other analysis as part of predictive maintenance programmes
• Manage and maintain historical information on static and rotating equipment such as running hours, data statistical information on all plant shut down and loss of production events caused by mechanical systems, engineering documents and review applicable codes and standards for compliance purpose
• Lead technical discussions, execute and manage project schedules and cost and collaboration with external and internal stakeholders, vendors for end of life and improvement project using SLNG Management of Change (MOC) process for mechanical equipment
• Liaise with external stakeholder including government agencies on approval and risk of shutdown of mechanical system that will affect gas-send out
• Participate in RCA, RBI, HAZID, HAZOP, Model Review studies for mechanical packages, co-ordinates and close out Mechanical related issues
• Participate in emergency response and may be assigned to a specific role and responsibility for such purpose

Work Experience

• Minimum of 3-5 years’ experience in maintenance of plant equipment, rotating machinery and static equipment, preferably in oil/petrochemical or related industries
• Good knowledge and experience working on different types of in-service pipeline inspection. Knowledge of the LNG / natural gas or other hydrocarbon industries an advantage
• Relevant technical experience in maintenance of mechanical/ machinery systems i.e compressor, pump, pressure vessel, hydraulic components and piping system.
• Conversant with local codes, regulations and standards, equipment inspection and schedule requirements. Certified in API, vibration and other analysis standards will be well regarded
• The incumbent should possess the following personal attributes:

1. A team player who can work well in a team and with good listening skill
2. High self-motivation with the ability to work with minimal supervision and adapt to changing priorities and assignments
3. Willing to take up new challenges and responsibilities

Education

• Bachelor Degree in Mechanical Engineering or other relevant Engineering/Technical disciplines
• Candidates with professional accreditation or affiliation to professional bodies of engineers will have an advantage

Job Description & Requirements

- Administer project planning and project execution
- To study drawings, specifications and contracts to understand project requirements
- Willing to learn and hands-on
- Liaise with client, consultants & main / sub-contractors and coordinate for site activities arrangement
- Perform site inspection and ensure all project activities are performed productively and are in accordance to specification and schedule, in the most efficient and cost effective manner
- Assist in cost control and estimating activities;
- Planning and deployment of resources such as manpower, machinery, equipment and material
- Preparation of report, Method Statements and technical submissions
- Ensure the project complies with regulations and clients’ specifications
- Adhere to safety and health regulations and aim for zero accident in the workplace
- Ensure safety and housekeeping is to maintained to the highest standard
- Prepare job completion record and progress claims
- Continually seek improvements in the work systems
- Ensure all company reports and documentation are completed accurately and on time;
- To perform Ad-Hoc duties as per assigned

- Fresh Graduates are welcome to apply

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible for successful customers’ product full lifecycle, including but not limited to, technology transfers, new products introduction, device performance, yield, and reliability of our advanced technologies

Key Responsibilities

• Take charge for successful new products qualification and technology transfers from motherfab
• Complex data analysis to identify process design weaknesses and/or manufacturing tool issues.
• Design and execute experiments, analyse complex data sets and derive actionable insights to improve yield and performance for each specific technology and/or products
• Collaborate with the engineering teams to maintain process stability and provide technical solutions to customers

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Minimum of 2 years of experience in silicon process flow enhancements and managing process shifts, changes with design rules and product layout, ensuring optimal yield, electrical test and product performance with short-and long-term reliability implications considerations
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

Responsibilities:

Customer Service (60%)

• Represent OMEGA in dealing with customers’ concerns.
• To provide quality support to customers’ technical enquiries.
• To communicate with customers on his needs and request for service.
• To perform repair, installation and commissioning of Marine Communication and Navigational equipment.
• To troubleshoot complex technical faults, report findings and communicate with Projects, Sales and customers for solutions and feedback.
• Interact with end-users to explain the failure mode in detail.
• Travel to customer sites as circumstances dictate; 60-70% of the time will travel around the globe to attend to break downs & repair onboard vessels; otherwise in Singapore supporting the same activities.

Internal Liaison (25%)

• Assist the project team in project executions; in providing technical expertise in field/site works.
• Be responsible for the tools and parts issued under his care.
• To observe and implement the company EHS policy; ensure compliance with all safety policies, practices and procedures at all times.
• Able to meet project deadlines and prioritizing tasks time to time as scheduled.
• Any other duties assigned by immediate Superior.

Reporting (15%)

• To report the jobs carried out in the standard service report form; report the productivity hours and tasks performed.
• To summarize service reports per project for team for submission to the Manager, Service.
• To report on team’s achievements on a monthly and quarterly basis.

Requirements:

• Degree in Electrical & Electronic Engineering or equivalent.
• Min 4 year of relevant working experience.
• Basic knowledge on Network System.
• Good Knowledge on one or two of the following: telecommunication, public announcement systems, navigation systems.
• Service oriented with analytical and problem-solving skills.
• Willing to travel and staying overseas for a period of up to 4 weeks.
• Able to work independently and meet schedules.

Job Purpose

To take charge as process/product owner role for processes transferred from MF or customers. To deliver KPIs right from process setup, qualification, tapeout, prototype to mass production phase.

Job Description

• To meet key process/product qual milestones set e.g. Tapeouts (NTO/RTO), PRS matching, ERA, WAT/yield matching, HTOL/ESD/Latchup etc
• Co-work with transfer team and Fab modules to deliver robust integrated process to enable a successful production volume ramp from development/pilot stage.
• Key Fab interface role working directly with customers to address their needs, product performance in terms WAT/yield, conference calls and customer audits etc
• Own process FMEA, PCP for processes under your ownership.
• Own SPC and CITs with modules/QA on inline and WAT Cp/Cpk/OOC performances to meet Fab and customer’s index.
• Manage daily ops related logistics in terms of inline/WAT disposition with related parties to enable smooth wafer shipment.
• To co-work with product engineer to perform device/process corner splits to check out product yield window.

Job Requirements

• Bachelor’s Degree preferably in Engineering with semiconductor process or device knowledge
• A minimum of 3 years of relevant experience in technology development, product transfer or process integration related scope. Fresh grads can be explored with relevant semiconductor device knowledge.
• Good presentation and communication skills
• Independent and adaptable to different culture fast
• Hardworking, adaptable and able to work independently and collaboratively with teams
• Ability to thrive and meet timelines in a fast-paced and dynamic result-driven environment

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Job Descriptions:

To support in setting up robust systems and processes at branch office(s) and ensure compliance by Branch Finance team(s) for all Finance & Accounting relating matters.

Overview of responsibilities:

Collaborate with branch office(s) to ensure compliance both with reporting requirements, tax laws and statutory requirements.

• Act as branch reviewer with continuous engagement with respective Branch Finance Controllers.

• Review the branch activities including finance, audit, tax and other compliance, periodical financials, position papers etc.

• Provide necessary support and handholding from HO perspective.

• Implement the financial control systems, policies, and procedures.

• Collaborate with head office to ensure the accuracy of cash flow projections.

• Develop budget and revisions and monitor monthly deviations.

• Work closely with vertical(s) to set up processes that enhance the internal controls.

• Ensuring prompt and accurate month-end and year-end close processes.

• Review financial statements and assure their timely submission.

• Provide support to internal and external auditors in completing audits across all branch office(s).

• Work closely with branch finance controller to understand changes in local compliances, regulations etc.

• Provide support in setting up Finance &Accounts operations in new branch office(s).

• Ensure implementation and compliance to SAP in new branch office(s).

• Assist in preparation of Corporate MIS(Consolidated).

• Assist in analysis of MIS from branches and provide inputs.

• Prepare compliance report on quarterly basis, review of Branch Compliance reports and exceptions, if any.

• Prepare consolidated compliance report to present to management.

• Assist in reviewing SOP compliance by all locations and co-ordinate with the branch accountants to ensure SOPs are followed.

Key Challenges:

• Engagement with multiple parties operating in different time zones.

• Ability to manage the work in stringent timelines.

• Travel to respective branch for inspection/audit/review

Knowledge, Skills & Abilities

• Certified Accountant/ CPA/ MBA in Finance

• 5-7 years of relevant experience including management of multiple geographies

• Proficient with SAP, Microsoft Office tools

• Excellent verbal and written communication skills.

• Ability to coordinate with team members in multiple geographies.

• Knowledge of IFRS, Consolidation, Tax, Accounting, Compliance, Financial Statements, Financial Reporting, MIS

• Good understanding of accounting concepts.

• Strong commercial acumen.

• Strong analytical skills.

• Ability to partner effectively

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Job Description

• Industry/ Organization Type: Marine Technology Service Provider
• Position Title: Administrative Assistant (Inventory control)
• Working Location: West – Tuas (Nearest MRT: Tuas Link) – Requires taking a few bus stops to reach the company
• Working Hours: 5 days (Mon-Fri: 8.30 am-5.30 pm)
• Salary Package: Up to SGD2800 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Maintain accurate records of inventory levels and ensure the database is up-to-date.
• Regularly review stock levels and usage trends to prevent overstocking or shortages.
• Coordinate with the procurement team to order necessary items before stock runs low.
• Prepare and manage detailed reports on inventory operations, adjustments, and issues for internal use.
• Document and update inventory procedures and policies to enhance workflow efficiency.
• Assist in processing incoming and outgoing orders, ensuring that all transactions are recorded promptly and accurately.
• Schedule and coordinate the delivery of goods, liaising with suppliers and logistics partners.
• Conduct regular checks to ensure the quality and condition of inventory items.
• Report any discrepancies or issues with delivered goods to the relevant parties immediately.
• Work closely with other departments, particularly the finance and operations teams, to align inventory needs with budgetary constraints and operational requirements.
• Provide administrative support during inventory audits and end-of-year stock takes.
• Identify opportunities for improving inventory processes and contribute to the implementation of new systems or technologies that enhance inventory management.

APPLY NOW!!!

• Min. N level
• Min. 1 year of working experience in the related field
• Training is provided to an inexperienced candidate
• Familiar with Microsoft Office

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69068 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

1. Perform site planning, coordination & inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met.

2. Support Quantity Surveyors in conducting site measurement and inspections.

3. Able to plan / coordinate site works and resolve drawing details and discrepancies.

4. Any other tasks assigned by the management.

Requirement

1. Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil/Structural) or equivalent.

2. Minimum 5 years construction experience with experience in civil construction industry.

3. Be able to work independently with minimum guidance and able to work within tight deadlines.

4. Bilingual in English and Mandarin is preferable

Interested applicants, please remember to include the following details for us to conduct a more effective job-matching for you:

1. Work experiences and job responsibilities

2. Current and Expected salary

3. Reason for leaving

4. Date of availability

5. Education background

6. Recent photo

About Us

Vivo Surgical is a patient-focused, clinician-driven medical device developer and manufacturer. Headquartered in Singapore with offices in China and Thailand, we are pioneering a novel endoscopic surgical robot for complex endoluminal surgeries. ISO 13485 certified with international accreditations awarded such as the US FDA and European CE mark, our devices target the medical needs of the world through innovative applications of science & technology. These encompass such fields as in vivo surgical LED lighting, portable endoscopy and endoscopic robots, which are strategically co-developed with world-class healthcare institutions and KOL collaborators. Join us as we build towards our vision of being Asia Pacific’s leading medical device developer and manufacturer.

About The Role

We value the importance of having a robust Quality Assurance and Regulatory Affairs team that would serve as a key pillar for sustained commercial success. To that end, we are looking for a Quality Assurance & Regulatory Affairs Manager to join us on this journey. You will be part of our fast-growing team and will take ownership of your role from the get-go. You will work on ensuring our company’s commitment to comply with regulatory requirements and to maintain the effectiveness of our Quality Management System (QMS). You will also be in charge of our products’ regulatory strategies and submissions to various regulatory bodies. Your role will enable you to work not only with diverse functions internally but also in close tandem with our external partners such as our suppliers, distributors and notified bodies.

Your responsibilities shall include the following:

• Ensure the company’s QMS complies with ISO 13485 and FDA 21 CFR 820/QMSR.
• Develop and manage Quality Procedures such as document control, CAPA, NCR, Supplier Control, Production Control, Feedback and Complaints Handling, and Post Market Surveillance.
• Organize and execute internal audits, management reviews and supplier audits.
• Plan and lead ISO 13485 audits and regulatory inspections.
• Participate in the products’ verification and validation activities.
• Develop, review and compile the medical device technical files whilst making sure the products meet all regulatory and quality standards.
• Involved in risk assessment tasks to identify potential quality and compliance risks in the product lifecycle and advise adequate risk control measures.
• Serve as the company’s Quality Management Representative (QMR) and Person Responsible for Regulatory Compliance (PRRC).
• Manage and mentor the QARA team to ensure members are adequately trained.
• Stay updated on medical device laws and regulations in the targeted markets.
• Work with senior management to define and deliver adequate quality and regulatory strategies.

Your Qualifications & Experience

• Minimum Bachelor’s degree in Engineering or Science.
• At least 5 years’ experience in quality assurance and/or regulatory affairs in the medical device Industry.
• Firm understanding of ISO 13485:2016, FDA 21 CFR 820/QMSR and ISO 14971.
• Prior involvement in HSA, FDA 510(k)/De Novo and/or MDR 2017/745 submissions will be a plus.
• Experience in generating risk management documentation (risk management plan, report, FMEAs).
• Possess a leadership and strategic mindset to organize and prioritize tasks for effective and timely delivery of regulatory goals to meet the company’s business objectives.
• Certification as an ISO13485:2016 lead auditor will be advantageous.

Contact

Please send your CV and cover letter to: [email protected]. We look forward to receiving your application.