Responsibilities:-

• Person in charge of the workplace on environmental regulations pertaining to the Environmental Public Health (Registration of Environmental Control Officers) Regulations 1999 Person in charge of the workplace implementation and revision of Environmental Management in the worksite
  Act as an Earth Control Measures Officer (ECMO)
• Establish, update, maintain, and implement the Environmental Management System and Environmental Impact Aspect assessment
• Conduct / Plan site environmental inspection and ensure effective implementation and continual improvement on all environmental matters. Advise occupier of the workplace or other person in charge of the workplace on environmental health problems and recommend remedies to establish a healthy working environment
• Oversee the installation of noise meters at site vicinity and monitoring of construction works noise to ensure it does not exceed the permissible noise levels throughout various stages of construction phases
• Coordinate with external pest control operator visits to carry out fumigation, mosquito oiling and rodent control measures. This is to ensure effective control on site
• Liaising with National Environment Agency & Public Utilities Board (PUB) on environmental issues and other statutory requirements of compliance by sites

Requirements:-

• Must possess Environmental Control Officer Certificate and registered with National Environmental Agency (NEA)
• Min 2 years’ relevant experience

Roles & Responsibilities:

• To look after worksite environmental, health & safety, carry out site inspections and to engage workers and stakeholders on maintaining good environmental health standards.
• Advise & train workers, staff and site personnel on EHS.
• Responsible for monitoring all activities on site and ensure that all contractors comply with the requirements of environmental compliance.
• Record, compile and prepare HSE reports and submit site environmental control report periodically.

Requirements:

• Registered ECO with NEA.
• WSQ Certificate in Workplace Safety and Health.
• At least 5 years of experience in the building & construction industry as a Registered ECO.

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Our client is a global manufacturer. Due to business needs, they are now recruiting a Customer Quality Engineer to be part of their Quality team for ongoing transformation projects. They are located in the North Area - easily accessible.

Responsibility of Customer Quality Engineer:

• Analyze and apply customer quality specifications, developing and upholding internal quality benchmarks through APQP methodologies (e.g., Process Flow Diagram, Control Plan).
• Facilitate Built-in Quality workshops, ensuring collaboration with cross-functional teams to achieve and monitor continuous improvements through to completion.
• Lead initiatives to resolve quality issues for new programs (such as Process of Record, Process Change Request, First Time Quality) to enhance performance.
• Chair Material Review Board meetings to address deviations and spearhead corrective actions for non-conformance cases.
• Obtain customer approval for Production Parts and provide support for the initial stages of production.
• Promptly address customer returns by utilizing Six Sigma problem-solving techniques and the 8D approach.
• Capture and document lessons learned for each new program and apply these insights to future projects.
• Ensure adherence to the Quality Operating System throughout product launches.

Requirements:

• Min Degree in Engineering related field
• Minimum 3 experience in Quality and Product Launch
• Knowledge in Automotive industry regulations and standards

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description & Requirements

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

.Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

JOBSCOPE OVERVIEW

1. Represent QA/QC department in 2G Management Meetings or other meetings required by Directors.

2. Create and maintain standard operating procedure (SOP’s), protocols, guidelines that ensure consistency and efficiency throughout the QA cycle.

3. Acts as Committee of all ISO audits.

4. Supervise and manage QA/QC team and interns.

5. Conduct physico-chemical and microbiological test for Chemicals and Incoming Paper.

6. Liaise with suppliers and third-party agencies.

7. Provide technical support to the sales and marketing team regarding product specifications, sample requirement & others.

8. Document those methods in standard operating procedures (SOPs) and production records, quality assurance activities with internal reporting and audits.

9. Review and compile documents for Audits (Batch Record: Prod sheet, Quality control test Reports; FG and RM Reports, Mixing records).

10. Ensure that on time calibration program of equipment (mechanical and lab instruments, weighing scales and test weights) are executed.

11. Assist to do in compounding and mixing when Mixer Operator is on leave.

12. Liaise with Overseas factory (China and Indonesia) to ensure that product or service meets specified requirements.

13. Review method validation study reports, ensure proper documentation of findings, and assist in approval or re-validation recommendations. Prepare summary reports of validation activities, results, and recommendations for management review.

14. Investigate validation failures or deviations, identify CAPA, and ensure implementation. Collaborate with cross-functional teams to enhance the efficiency and effectiveness of validation activities.

15. Identify risks in testing methods, implement mitigation strategies, and ensure data integrity during validation to maintain accuracy, reproducibility, and regulatory compliance.

16. Review and approve method validation documentation, ensuring accuracy, completeness, and compliance with quality standards. Maintain up-to-date records of validation activities, deviations, CAPA, and ensure proper version control for all related documents.

17. Provide training on method validation processes and best practices, and support Production, QC and R&D teams in executing protocols and analyzing data accurately.

18. Any other area of responsibilities that the company deems necessary.

A. QUALITY CONTROL

1. Manage product complaints or non-conformances; thoroughly investigate process failure, determine the root cause, and take prompt corrective actions.

2. Conduct physical, physico-chemical test and microbial analysis of finished product.

3. Track the materials (chemicals and fragrance) that are present in the chemical room and know whether additional supplies need to be ordered.

4. Calibrate all equipment for In-house verification Example – pH meter, weighing scale etc. and arrange external calibration with external party.

5. Train new production operators in quality control.

6. Any other area of responsibilities that the company deems necessary.

B. LIAISE WITH SUPPLIERS (Services):

1. DI Water System Maintenance (Requirements: According to Contract): Loop Sterilization, UV-Lamp etc.

2. Complete Water Quality Testing (annual) by External Lab

3. Monitor the consumable supplies from different suppliers for DI Water (Column, filters, gauges).

4. Wet Wipes Monthly External Microbial testing

5. Monitor the annual cleanroom Certification.

6. External Calibration of Equipment

7. Any other area of responsibilities that the company deems necessary.

C. PRODUCT TECHNICAL SUPPORT

1. Support Export Sales and Marketing for preparation of documentation for regulatory use (COA, Ingredient’s list, FG and RM spec etc).

2. Collaborate with development, QC, and regulatory teams to plan, execute, and review method validation protocols, ensuring compliance with applicable guidelines (e.g., ICH, FDA, EMA) and company procedures, while meeting regulatory standards for intended use.

3. Support on the process validation on the manufacturing of the product.

4. Any other area of responsibilities that the company deems necessary.

Responsibilities

You will assist in the tasks of the Quality Service and Finance units for the client, with a focus on both quality service and finance support, including:

Quality Service tasks:

1. Addressing clients' queries over the phone and via emails.

2. Attending to walk-in clients.

3. Providing administrative support to the QS team as needed.

4. Any other duties assigned by the QS Manager.

Finance tasks:

1. Handling procurement tasks and managing stock of pantry/stationery items.

2. Scanning, filing, and organizing documents.

3. Checking details in SCMS for investigations, processing refunds, and resolving discrepancies in backlog or current cases.

4. Assisting with the implementation of NETS at kiosks.

5. Sending email reminders to Hakams to submit claims.

6. Any other duties assigned by the Finance Officer/Manager.

Working Arrangement:

Working Hours:

Mon to Thurs – 8am to 5.30pm

Fri – 8am to 5pm

Sat-Sun and PHs - Not working

Duration: 6 Months

Location: Lengkok Bahru

Requirements:

1. Diploma in any discipline. Candidates without a diploma but with relevant work experience will also be considered. Fresh graduates are welcome to apply.

2. Proficient in Microsoft Office Suite (Word, Excel, PowerPoint) and the ability to work with multiple IT systems.

3. Good communication and writing skills

4. Organized with excellent time management skills and the ability to prioritize tasks effectively.

5. Ability to handle sensitive information with confidentiality.

6. Meticulous attention to detail, ensuring accuracy in document handling, procurement, and financial tasks.

7. Strong problem-solving skills and the ability to identify and resolve discrepancies in a timely manner.

8. A proactive, self-motivated individual who can work independently and collaboratively within a team.

9. Able to handle multiple tasks and work under pressure, while maintaining a high level of professionalism.

10. Passionate about serving the community and demonstrating empathy and respect when dealing with clients and colleagues.

EA License No.: 96C4864

Reg. No.: R22110485

Job Summary:

We are seeking an experienced Design Quality Engineer to lead quality initiatives for our thermal cooling solutions in the electronics and computing sectors. The ideal candidate will focus on ensuring design and process quality, driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and cross-functional collaboration, we encourage you to apply.

Key Responsibilities:

• Quality Monitoring & Yield Optimization: Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production.
• Abnormal Quality Management: Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement solutions and preventive actions.
• Process & Quality Control Enhancement: Strengthen internal quality control systems and enhance process capabilities. Lead initiatives aimed at maximizing operational efficiency.
• Customer Quality Assurance: Lead corrective actions for customer-reported quality issues and communicate preventive solutions to stakeholders.
• Inspection Process Optimization: Optimize the quality inspection process by integrating automation and cutting-edge technologies where applicable.
• Cross-Department Collaboration: Promote communication and collaboration between design, production, and other teams to ensure consistent adherence to quality standards.
• Team Leadership: Oversee the quality team’s task assignments, performance, and development, ensuring timely delivery of objectives.

Requirements:

• Bachelor's degree in the related field
• Proven experience in quality engineering, with a focus on manufacturing and design quality.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and industry standards.
• Six Sigma certification or similar is an advantage.
• Able to communicate with Chinese clients
• Willingness to travel and work abroad in China or Vietnam for at least 10 months annually.

HOW TO APPLY:

Interested applicants, please submit your updated resume in PDF/MS Word format to [email protected]

Please state your availability, current & expected salaries for processing purpose.

All applications will be treated in the strictest confidence.

We regret that only shortlisted candidates will be notified.

Tay Bi Hui Avery

Reg no: R23112677

EPS Consultants

95C5630

Job Description

• Lead and guide sub-contractor to achieve quality workmanship
• Handle paperworks , defects issuance and reporting
• Conduct defects investigation and identification

Requirement

• Minimum 4 years in CONQUAS
• Possess at least 2 good industry practices certificates
• Microsoft office knowledge
• Able to communicate with client and consultant

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At Pall Corporation, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

As a global leader in high-tech filtration, separation, and purification, Pall Corporation thrives on helping our customers solve their toughest challenges. Our products serve diverse, global customer needs across a wide range of applications to advance health, safety and environmentally responsible technologies. From airplane engines to hydraulic systems, scotch to smartphones, OLED screens to paper—everyday Pall is there, helping protect critical operating assets, improve product quality, minimize emissions and waste, and safeguard health. For the exponentially curious, Pall is a place where you can thrive and amplify your impact on the world. Find what drives you on a team with a more than 75-year history of discovery, determination, and innovation.

Learn about the Danaher Business System which makes everything possible.

Are you a person who enjoys making positive, tangible changes that improve the overall quality of a product or process? Do you have a passion for leading quality systems and processes? Are you customer oriented? If so, then maybe you would be a great fit for our Director Quality Director Quality Assurance - Microelectronics/APAC.

This position is part of the Quality and Regulatory Affairs department and is an onsite position.

In this role, you will have the opportunity to:

• Develop positive relationships with Key Customers, OPS team and Commercial Leaders
• Develop and implement Micro Electronics Industry leading quality systems and processes to support customer needs and expectations.
• Establish and handle QA tracking and trending of crucial performance measures (DPPM) and the preparation of periodic reports for management review.
• Implement and maintain an effective quality management system for Micro-E specific plants and aligned to corporate and BU policies, procedures, and industry specific requirements.

The essential requirements of the job include

• University Degree in mechanical/electrical or chemical engineering with a minimum of 10 years of dynamic quality assurance experience, with at least 5 years at senior level with multi-site and multi-region experience
• Thorough understanding of ISO 9001 standard. GMP knowledge and other ISO standards required.
• Fully conversant with AIAG Core tools, APQP, statistical analysis and the principles of variation reduction.

• Performing the electrical wiring, termination, installation as per drawing for control panel, instruments and machine
• Able to work independently and proactively and work under fast pace environment.
• Able to assemble control panel for housing,food court and shop lot use
• Able to read and draw control panel drawing

Your new company

My client (West area) is a leading provider of comprehensive utility solutions and value-enhanced energy services, delivering innovative and integrated offerings to their customers.

Your new role

Here is a summary of the role you are applying for;

Join their Control and Instrumentation team as a maintenance expert, responsible for ensuring the optimal performance of instrumentation and control systems in their power plant.

Below are some of the key responsibilities for the role;

• Executing maintenance work efficiently and effectively, with a focus on safety and regulatory compliance
• Troubleshooting and rectifying equipment failures and malfunctions
• Testing and recommissioning rectified systems and equipment
• Performing overhaul, inspection, calibration, and servicing tasks during scheduled plant outages
• Implementing modification and upgrading plans to enhance system reliability and availability
• Maintaining detailed records and reports using computer-based software (Maximo, MS Word, and MS Excel)
• Assisting Engineers and Technical Officers in maintenance work
• Supervising contractors and ensuring compliance with safety standards

What you'll need to succeed

The successful candidate, should have;

• Diploma/NITEC in Electronics Engineering
• Knowledge of Instrumentation and control systems
• 2 years of experience in the Power Plant or Oil and Gas industry (preferred)
• Self-driven and team-oriented with a positive work attitude
• Availability for standby and emergency calls
• Strong safety mindset and good workplace safety behavior
• Willingness to be part of the CERT team and participate in emergency responses

What you'll get in return

• Joining a company that is at the forefront of our industry
• Being part of a collaborative and progressive team
• Contributing to a company committed to making a positive impact on the environment and society

What you need to do now

If you believe you meet the specified requirements or know a suitable candidate, please click the link to apply. Alternatively, you may submit your application or referral directly to [email protected].

If this role isn't quite suitable for you, but you're interested in exploring new opportunities, I invite you to contact me for a confidential career consultation. I'm here to help you navigate your next career move.

EA Reg Number: R21102304 | EA License Number: 07C3924 | Company Registration No: 200609504D

Job Responsibilities

• Work closely with all production team on the production process and oversee the day-to-day operations to ensure compliance with AVA, NEA HACCP guidelines and ISO standards
• Perform the creation and revision of corporate level quality documents that support GMP operations to ensure compliance with GMP guidelines
• Assist to contribute to the maintenance and continuous improvement of the Record Management systems and processes
• Assist to conduct regular risk assessment of corporate compliance against ever-changing Food Safety regulation to identify and work with relevant technology to develop mitigation plan
• Assist to develop Food Safety and Food Defends related standards
• Assist to develop Food Safety and Food Defends training materials
• Assist in driving the implementation of the Food Safety and Food Defends system and prerequisite program ingredient
• Conduct impact assessments and updates to QMS policies
• Manage QMS Management Review meetings according to local SOPs
• Maintain ISO / HACCP documentation and monitoring records update
• Handle all related operations audits
• Work closely with Marketing/ Sales and Production in packaging artwork development by providing product technical information eg. ingredient listings, nutrition labels that comply with labelling regulations of sales countries
• Update internal and external customers on the status of the quality issues
• Assist to ensure appropriate corrective and preventive actions are taken to eliminate detected non-conformance and the causes
• Provide Technical support to Marketing, R&D, Sales & Operations and Business Development teams in terms of product information enquiries from customers and country customs
• Other duties as assigned by the Head of Department

Job Requirements

• Able to communicate with all level and good interpersonal skills
• Knowledge in food labelling regulatory requirements pertaining to product claims, ingredient listing, nutrition labelling and etc.
• Meticulous with good attention to details and an effective change agent

Education, Experience & Training

• Min. Diploma/Degree in Food Technology, Food Science or its equivalent qualifications
• At least 1 year of experience working in SME food manufacturing environment
• With minimum 2 years in Quality Assurance or Quality Management, preferably in Food Industry
• Knowledge of HACCP, ISO22000 & GMP requirement will be advantage

• Respond promptly and professionally to high-priority complaints or concerns escalated by internal departments or external stakeholders, ensuring a service-oriented approach.
• Act as a key point of contact between internal departments and external entities (e.g., citizens, businesses, and other government agencies) to resolve issues efficiently and effectively, with a commitment to delivering high-quality service.
• Ensure that all written communications adhere to relevant laws, regulations, and agency policies, while reflecting the agency’s commitment to quality service.
• Maintain detailed and organized records of escalations, including actions taken, outcomes, and follow-up requirements, to ensure accountability and continuous improvement in service delivery.
• Identify trends and recurring issues in escalated cases, and provide feedback to improve processes, policies, and communication strategies that enhance the quality of service. Prepare concise and insightful written briefs on complex escalated issues, offering recommendations that prioritize both resolution and service quality.

Requirement:

• Bachelor’s degree in Communications or similar related field.
• At least 2-3-years of experience in a writing or communications role
• Demonstrated ability to manage escalations and sensitive situations with tact and professionalism.
• Exceptional written and verbal communication skills.
• Ability to manage multiple tasks and work under pressure to meet deadlines.
• Experience in dispute resolution or customer service
• Analytical skills to assess complex issues and recommend solutions.
• Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint).

Interested candidates, please click on the following link to begin your job search journey and submit your curriculum vitae (CV) directly through the official PERSOLKELLY job application platform - GO. https://go.persolkelly.com/job/apply/9402

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tacand the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries. Suzana Binte Slemat (EAP No. R1989461) EA Licence No. 01C4394

• Handle mailbox survey submissions, feedback, and requests from survey respondents within stipulated turnaround time.
• Ensure consistent and detail cases notes updated in system after each liaison with respondents.
• Responsible for inter-department liaison for correct assignment of respondents to the parties responsible.
• Ensure prompt follow-up for survey cases under pending status.
• Provides accurate daily report on mailboxes activities for the day to relevant stakeholders.
• Ensuring all potential/actual complains are acted upon within stipulate timeline.

Interested candidates, please click on the following link to begin your job search journey and submit your curriculum vitae (CV) directly through the official PERSOLKELLY job application platform - GO. https://go.persolkelly.com/job/apply/5789

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tacand the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries. Suzana Binte Slemat (EAP No. R1989461) EA Licence No. 01C4394

The Quality Governance Lead is responsible for overseeing and ensuring the consistency, accuracy, and reliability of financial, project, and operational data across the organization. This role involves developing and managing dashboards, early alerts, and quality governance reporting, as well as driving corrective actions based on key project and financial indicators. The lead will work closely with PQE lead, Quality Leads, SBG Quality Council Leads/members, LOB leads, Delivery Lead, Client Service Leads, Client Delivery Leads, project managers, finance teams, and senior leadership to ensure quality control and mitigate risks. This role ensures that the organization maintains a proactive, data-driven approach to quality governance, driving transparency, accountability, and risk mitigation across all projects.

What will you do? 

1.    Dashboards and Early Alerts:

• PowerBI Dashboards: Develop and maintain interactive dashboards using PowerBI to track key project and financial metrics.
• Early Alerts: Establish systems for early alerts regarding critical issues such as:
  • Missing or inaccurate forecasts (ETC)
  • Manpower cost trending anomalies
  • Consistent variance between actuals and forecasts (Day 2)
  • Past fiscal year trends vs current forecasts (Day 2)
  • High unbilled revenue
  • Aging receivables and poor collection trends
  • EAC (Estimate at Completion) margin erosion and activate Watchlist
• AI Exploration: Explore and implement AI-driven models to predict potentially troubled projects and identify areas for intervention.

2.    Watchlist Management:

• Develop and manage the Watchlist for at-risk projects or financials, categorizing them into:
  • Orange (High attention needed)
  • Red (Immediate action required)
  • BRC - Projects need budget revisions
• Provide regular updates and insights to PQE lead and Global Service Lead and other stakeholders regarding projects on the Watchlist and recommend corrective actions.

3.    Quality Governance Reporting:

• Monthly Business Review (MBR): Oversee the preparation of MBR reports, delivering key insights into project status, financial performance, and emerging concerns.
• Quarterly Business Reviews (QBR): Lead the preparation of QBR reports, providing insights into project health, financial performance, and areas of concern.
• Audit and Risk Committee (ARC): Provide detailed reporting and analysis to the ARC on project and financial performance, including risk mitigation and governance practices.
• Board Reporting: Prepare concise, impactful reports for the Board, focusing on critical project and financial health indicators, trends, and risks.

Job Description

• To conduct compliance check for functions involving Post-IA, Placement, Retention and offload checks to ensure that all procedures are complied
• To conduct historical data and compliance check
• To main and submit Quality Assurance Reports (Error Analysis/Action Plan/ICMS and CHI Syntax and etc)
• Creating and updating Standard Operating Procedures.
• Involved in Committee Meetings with external partners, comfortable in taking minutes.
• To review established work procedures (workflow) with the aim to improve overall processes.
• Assist in system updating of clients records and registration.
• Involved in ad-hoc projects/task assigned by superior

Requirements

• Warm engaging personality with at least 3 years of working experience.
• Applicant must be at least a Diploma/equivalent holder in any principle
• Excellent Microsoft Office skills, especially Excel
• Strong and demonstrable attention to detail with a methodical approach to task completion
• Confident in audit and quality assurance practices
• Experience in data security processes and policies
• Ability to work independently as well as in a team and meet deadlines
• Strong written and verbal communication skills
• Familiar with Data security/Data protection
• Strong process orientation: must be logical and able to follow processes and adapt to changes
• Experience of working in a similar capacity.